Velocity Model of Western Volgo-Uralia from Receiver Functions

The results of studying the deep structure of the Earth’s crust and upper mantle in the central part of the Russian platform from receiver functions are presented. The records of teleseismic waves by the Monakovo small-aperture seismic array in the region of the northwestern slope of the Tokmovskii Arch of the Volga–Kama anteclise are used. The modification of the P-receiver function method (Vinnik, 1977) suggested in (Sanina et al., 2014) for analyzing the receiver functions in the regions with a complexly structured upper part of the section and the presence of a thick sedimentary cover is applied. The method is based on separating the high- and low-frequency components of the seismic record and successive reconstruction of the V-s velocity section in the upper part of the crust, which is performed first and, next, the entire deep section of the crust and the mantle down to a depth of ~300 km. The positions of the seismic conversion boundaries in the crust and upper mantle beneath the Monakovo array are determined. The upper mantle velocity section constructed based on the observations at the Mikhnevo array (Sanina et al., 2014) is compared with the world data on the ancient Precambrian platform.     

Rayleigh Wave Group Velocity Tomography of Siberia, China and the Vicinity

—Rayleigh waves are used in a tomographic inversion to obtain group velocity maps of East Asia (40° E–160° E and 20° N–70° N). The period range studied is 30 to 70 seconds. Seismograms used for this study were recorded at CDSN stations, at a temporary broadband seismic array in Tibet, at several SRO stations, and Kirnos-equipped stations established in Asia by the former Soviet Union, in Siberia, in the Sakhalin and in Mongolia. Altogether more than 1200 paths were available in the tomographic inversion. The study area includes the Angara craton, the geologically ancient core of Asia, and the subsequently accreted units, the Altaids (a Paleozoic collision complex), the Sino-Korean platform (a chain of Archaen terranes separated by belts of active structures), the south China platform (a collage of Precambrian, Paleozoic and Mesozoic metamorphic and igneous terranes), as well as the Tibetan plateau (an active tectonic feature created in late Cenozoic through collision of the Indian subcontinent and the Asian continent). Many of these main units are recognizable in the tomographic images as distinctive units; Tibet appears as a prominent low velocity (about ?15% from the average) structure, with western and central Tibet often appearing as the areas with the lowest velocities, the Central Asian fold-belt, and the Angara craton are consistently high group velocity areas. Some lesser tectonic features are also recognizable. For example, Lake Baikal is seen as a high velocity feature at periods greater than 40 seconds. However, the high group velocity feature does not stop near the southern end of Lake Baikal; it extends south-southwestward across Mongolia. The North China Plain, a part of the platform where extensional tectonics dominate, is an area of high velocities as a result of relatively thin crust. The south China block, the least tectonically active region of China, is generally an area of high velocity. For periods longer than 40 seconds, a NNE trending high group velocity gradient clearly exists in eastern China; the velocities are noticeably higher in the east. From the group velocity maps, average dispersion curves at twelve locations were determined and inverted to obtain velocity structures. Main results of group velocity inversion include: (1) a Tibetan crust of around 60?km thick, with low crustal and upper mantle shear velocities, at 3.3?km/s and 4.2?km/s, respectively; (2) with the Moho constrained at 40–43?km, the Angara craton and the Central Asian foldbelt have a V _S in excess of 4.6?km/s; (3) relatively low shear velocities are obtained for tectonically active areas. In many parts of the study area, where Precambrian basement is exposed, the process in the crust and upper mantle due to recent tectonic activities have modified the crust and upper mantle velocity structures under the Precambrian terranes, they are no longer underlain by high velocity crust and mantle.     

南北地震带岩石圈S波速度结构面波层析成像

本文利用天然地震面波记录和层析成像方法,研究了南北地震带及邻近区域的岩石圈S波速度结构和各向异性特征.结果表明南北地震带的东边界不但是地壳厚度剧变带,也是地壳速度的显著分界.其西侧中下地壳的S波速度显著低于东侧,强震大多发生在低速区内部和边界.青藏高原东缘中下地壳速度显著低于正常大陆地壳,在松潘甘孜地块和川滇地块西部大约25～45 km深度存在壳内低速层;这些低速特征与高原主体的低速区相连,有利于下地壳物质的侧向流动.地壳的各向异性图像与下地壳流动模式相符,即下地壳物质绕喜马拉雅东构造结运动,东向的运动遇到扬子坚硬地壳阻挡而变为向南和向北东的运动.面波层析成像结果支持青藏高原地壳运动的下地壳流动模型.南北地震带的岩石圈厚度与其东侧的扬子和鄂尔多斯地块相似但速度较低.川滇西部地块上地幔顶部(莫霍面至88 km左右)异常低速;松潘甘孜地块上地幔盖层中有低速夹层(约90～130 km深度).岩石圈上地幔的速度分布图像与地壳显著不同,在高原主体与川滇之间存在北北东向高速带,可能会阻挡地幔物质的东向运动.上地幔各向异性较弱且与地壳的分布图像显然不同.因此青藏高原岩石圈地幔的构造运动具有与地壳不同的模式,软弱的下地壳提供了壳幔运动解耦的条件.     

新疆及其毗邻地区地震层析成像

利用新疆地震台网及其毗邻地区的国外地震台站提供的地震Ｐ波到时数据，重建了新疆及其毗邻地区地壳上地幔的三维速度图像．主要结果是：１．研究区地壳上地幔的地震波速度存在明显的横向不均匀性．这种不均匀性出现在不同构造单元之间，也出现在各构造单元之内．２．一般来说，研究区域内盆地是上地幔的隆起区，褶皱系是上地幔的坳陷区．３．岩石层厚度和软流层的深度与全球的平均结果有较大不同．４．海洋岩石层或大陆岩石层板块在兴都库什和克什米尔与中国交界地区的消减明显存在．５．地壳上地幔物质运动比较剧烈，有部分熔融物质上涌到地壳中部或更浅的深度．     

太行山构造带壳幔结构分段性特征

分别利用纯S波波形反演和T函数法计算了太行山构造带及其邻近地区100km以上的壳幔剪切波速度结构,结果显示太行山构造带在南、中、北段的壳幔结构存在明显差异。南段邢台邯郸地区地壳中比较突出的特点是下地壳存在一个厚度近10km的低速层;中段石家庄—保定地区靠近山脉的各台地壳结构相对比较稳定,越向盆地区发展,结构愈加复杂化;北段到达北京地区,由于该区是太行山与燕山构造带的交汇地区,中下地壳出现薄高低速转换层位,呈现不稳定状态。沿太行山构造带东缘是地震活动带-河北平原地震带,通过对比速度结构与地震空间分布,发现不同区段小震分布特点与地下低速或不稳定结构关系密切。结合该区域上地幔速度结构特征,认为太行山中段与华北地区中新生代以来的岩石圈大规模减薄运动关系密切,而南北两段当前地幔物质比较活跃,构造运动相对更为强烈。     

3-D velocity images of the crust and upper mantle of the Tianshan area

（胥颐，朱介寿，刘志坚，张华卿，朱燕）３－ＤｖｅｌｏｃｉｔｙｉｍａｇｅｓｏｆｔｈｅｃｒｕｓｔａｎｄｕｐｐｅｒｍａｎｔｌｅｏｆｔｈｅＴｉａｎｓｈａｎａｒｅａ￥ＹｉＸＵ；Ｊｉｅ－ＳｈｏｕＺＨＵ；Ｚｈｉ－ＪｉａｎＬＩＵ；Ｈｕａ－ＱｉｎｇＺＨＡＮＧａｎｄＹａ...     

地幔上涌对鄂尔多斯西缘岩石圈的改造:来自远震多尺度层析成像的证据

本文利用喜马拉雅二期科学探测台阵的678个地震台站及26个固定台站记录到的9,641个地震共约160000条远震P波走时数据,采用基于稀疏约束的多尺度层析成像方法,获得了鄂尔多斯西缘及邻区上地幔800 km深度范围内P波速度结构.结果显示,在东经104°附近阿拉善地块与鄂尔多斯盆地间存在岩石圈深度的构造边界,这表明阿拉善地块与鄂尔多斯可能分别从属于不同的大地构造单元.以北纬38°线为界,鄂尔多斯地块西缘在岩石圈范围内南北存在明显的速度差异,鄂尔多斯南部上地幔200~300 km深度范围显示为高速异常,而鄂尔多斯北部上地幔显示大面积的低速异常.这一现象表明,鄂尔多斯地块南北两部分经历了不同的构造演化过程.根据本文的结果可以进一步推断,由于青藏高原、阿拉善地块向东北方向推挤以及岩石圈的拆离引起的上地幔扰动导致了地幔上涌,上涌的热物质改造了鄂尔多斯西北缘地区的岩石圈,并使该区的岩石圈减薄.地幔上涌也可能是东经104°边界带和北纬38°构造带形成的深部动力学因素.     

喜马拉雅山北部地区的地壳结构模型和速度分布特征

本文根据1981年西藏南部喜马拉雅地区的人工地震测深资料进行了震相对比,分辨出t₁、t₂、t₃、t₄、t₅和t₆六组地壳中和莫霍界面的反射波,并用理论走时曲线、绘制速度曲线图、射线跟踪和综合地震图等方法得到了主测线（PP）上各地段的地壳结构模型。初步结果表明,该地区地壳西段较薄（约73公里）,东段稍厚（约77公里）,平均总厚度约为75公里。地壳的平均P波速度约为6.2-6.3公里/秒。 地壳为高低速相间的多层结构。在中上部有一低速层,其厚度为数公里,速度为5.6-5.7公里/秒,与上层速度差为0.5-0.6公里/秒。低速层在测线东段比较肯定,在西段则不甚明显。结合藏南定日、岗巴一线有强烈水热活动的事实,低速层的存在可能意味着地壳中存在部分熔融的高温物质。下部地壳的速度为6.7-6.8公里/秒,且比较均匀。从莫霍面反射波的特征来看,在紧靠其上方可能有一个速度反转带,其厚度亦为数公里。上部地壳的结构在横向上有较大的差异,这说明在地质历史上,西藏特提斯带曾经历过强烈的地壳变动。     

南海西沙地块岛屿地震观测和海陆联测初步结果

为了研究南海西沙地块下方的地壳结构,我们在岛屿区架设了流动地震台站进行天然地震观测和海底地震仪的人工地震探测.本文利用远震接收函数方法和射线追踪方法对琛航台的远震数据和海陆联测数据进行了初步处理和分析,建立了琛航岛下方的一维横波速度模型以及横穿琛航岛的二维地壳结构模型.琛航岛顶部存在2 km厚的新生代低速沉积层,下地壳...     

西藏高原当雄-亚东地带地壳与上地幔结构和速度分布的爆炸地震研究

本文概述了在西藏高原长达450公里左右的南北向测线上取得九次湖中水下爆炸地震记录的处理结果。通过数字处理、拟合和反演等计算,得出了该地区地壳与上地幔的成层结构和速度分布。 结果表明,该区整个沉积岩层厚约3-5公里,雅鲁藏布江以北到当雄地带,地壳巨厚达70-73公里;江南地区为68-45公里,并逐渐向南翘起。在成层地壳介质中发现下地壳中存在低速层,厚约10公里,速度为5.64公里/秒。分析认为,高原地形与巨厚地壳的形成是印度洋板块与欧亚板块碰撞以及长期挤压和内部物质运移的结果。     

云南思茅—中甸地震剖面的地壳结构

云南思茅—中甸宽角反射/折射地震剖面切割松潘—甘孜、扬子和华南三个构造单元的部分区域. 我们利用初至波和壳内反射波走时层析成像获得地壳纵波速度结构. 在获得新的地壳速度结构模型基础上，利用地震散射成像思想和低叠加次数的叠前深度偏移方法重建了研究区的地壳、上地幔反射结构. 综合分析研究区地壳P波速度模型和壳内地震反射剖面发现：沿测线从北至南地壳厚度从约50 km减薄至35 km左右，地壳厚度的减薄量主要体现在下地壳，剖面北段下地壳厚度约为30 km，剖面南段下地壳厚度仅为15 km左右；上地幔顶部局部位置P波速度值偏低，一般为76～78 km/s，反映出云南地区是典型的构造活动区的特点.剖面沿线地壳内地震反射发育，其中莫霍强反射出现在景云桥下方；在景云桥弧形断裂带8～10 km深处出现宽约50 km的强反射带.     

华北盆地强震的震源模型兼论强震和盆地的成因

华北盆地自第三纪以来产生不均匀沉降,形成众多凹陷和隆起.传统的热张裂模型或是拉一分模型均不适用于华北盆地.我们根据反射和折射地震探测以及地震体波层析成象的结果,说明震源区附近存在Moho界面断裂,而且有明显的迹象表明,上地幔高温物质（低速度）向地壳下部入侵.因此,作者提出华北盆地强震以及凹陷形成的新模型,即在水平板块构造应力场的背景中,上地幔热物质向地壳下部入侵,它所产生的扰动应力场不仅在横向是不均匀的,而且在垂向也是不均匀的.它能够在地壳上部产生足够大的伸张应力场,同时在地壳中部或下部产生水平切应力场.这个新模型也能解释华北盆地的地壳厚度没有减薄,而地面热流又较大的现象. 由于地壳中力学性质随深度而改变,所以强震可能是由中部地壳的塑性形变以及上部地壳的脆性断层所组成的,即所谓两层破裂的震源模型.     

The structure of the crust in TESZ area by kriging interpolation

A precise 3D model of the crust is necessary to start any tectonic or geodynamic interpretation. It is also essential for seismic interpretations of structures lying below as well as for correct analysis of shallow structures using reflection seismics. During the last decades, a number of wide-angle refraction experiments were performed on the territory of central and eastern Europe (POLONAISE’97, CELEBRATION 2000, SUDETES 2003), resulting in many high quality 2D models. It is an interesting and complicated transition zone between Precambrian and Palaeozoic Platforms. This paper presents 3D model of the velocity distribution in the crust and upper mantle interpolated from 2D models of the structure along 33 profiles. The obtained model extends to a depth of 50 km and accurately describes the main features of the crustal structures of Poland and surrounding areas. Different interpolation techniques (Kriging, linear) are compared to assure maximum precision. The final model with estimated uncertainty is an interesting reference of the area for other studies.     

渤海海峡及周边区域地壳结构的层析成像特征

渤海海峡是连接中国东部山东半岛和辽东半岛的重要途径,其跨海通道的地壳稳定性研究受到高度关注.本文利用地震层析成像方法重建三维P波速度模型,揭示了渤海海峡及周边区域地壳和上地幔的构造特征.结果表明,渤海海峡的速度结构存在明显的非均匀性,海峡北部地壳速度较高,结构较为完整,断层活动不明显,与现今较弱的地震活动相吻合,但是地壳底部存在低速薄层,它有可能成为地壳和上地幔之间的滑脱带,需要开展进一步的研究加以确认.相比之下,海峡南部地壳速度偏低,附近区域地震活动频繁,与张家口—蓬莱断裂带通过于此有着密切的联系,该断裂持续不断的地震活动对海峡南部的地壳结构产生了较大的影响.在渤海南部,郯庐断裂带东、西两侧的地壳结构明显不同,西侧速度偏高,东侧至渤海海峡速度偏低,这一特征可能与此地区广泛发育的断层和地震活动有关.另外,受华北克拉通破坏及地幔上涌的影响,渤海地区地壳深部和上地幔速度偏低,郯庐断裂带及渤海海峡附近显示出深部热流的活动迹象,反映了岩石圈减薄和软流圈的局部抬升.     

Seismic tomography beneath the orogenic belts and adjacent basins of northwestern China

Three-dimensional velocity images of the crust and upper mantle beneath orogenic belts and adjacent basins of the northwestern continent of China are reconstructed by seismic tomography, based on arrival data of P wave recorded in seismic networks in Xinjiang, Qinghai, Gansu of China and Kyrgyzstan. The velocity images of upper crust demonstrate the tectonic framework on the ground surface. High velocities are observed beneath orogenic belts, and low velocities are observed in the basins and depressions that are obviously related to unconsolidated sediments. The velocity image in mid-crust maintains the above features, and in addition low velocities appear in some earthquake regions and a low velocity boundary separates the western Tianshan Mts. from eastern Tianshan Mts. The orogenic belts and the northern Tibetan plateau have a Moho depth over 50 km, whereas the depths of the Moho in basins and depressions are smaller than 50 km. The velocity images of upper mantle clearly reveal the colliding relationship and location of deep boundaries of the continental blocks in northwestern China, indicating a weakness of the upper mantle structure of orogenic belts. The top depth of upper mantle asthenosphere varies from place to place. It seems shallower under the northern Tibetan plateau, Altay and Qilian Mts., and deeper under the Tarim and Tianshan regions. Hot mantle probably rose to the bottom of some orogenic belts along tectonic boundaries when continental blocks collided to each other. Therefore their dynamic features are closely correlated to the formation and evolution of orogenic belts in northwestern China.     

郯庐断裂带中南段的岩石圈精细结构

郯庐断裂带是中国东部规模最大的构造活动带,有着复杂的形成演化历史,对中国东部的区域构造、岩浆活动、矿产资源的形成和分布以及现代地震活动都有重要控制作用.2010年在郯庐断裂带中南段的江苏宿迁市附近,采用深地震反射探测方法对郯庐断裂带及其两侧地块的岩石圈结构进行了解剖.结果表明,该区莫霍面和岩石圈底界均向西倾,其中,地壳厚度约为31~36km,岩石圈厚度约为75~86km,且岩石圈厚度在郯庐断裂带下方出现突变.郯庐断裂带在剖面上表现为由多条主干断裂组成的花状构造,其内部发育有断陷盆地和挤压褶皱,具有伸展、挤压和走滑并存的构造形迹,暗示郯庐断裂带的形成和演化经历了多期复杂的构造活动.这一断裂带错断了近地表沉积层,向下切割莫霍面和岩石圈地幔,属岩石圈尺度的深大断裂构造系统.软流圈高温高压热物质沿断裂带的上涌、岩浆底侵或热侵蚀作用造成岩石圈出现拉张伸展和岩石圈减薄,并可能使岩石圈组构及其物质成分发生改变.本项研究结果不但可进一步加深对郯庐断裂带深、浅部结构的认识,而且还可为分析研究华北克拉通东部的深部过程和浅部构造响应提供资料约束.     

四川地区的地震层析成像

由四川地震台网的P波数据所进行的层析成像研究得到了该区地壳及上地幔速度图像的新信息(结果表明:1.20^-km深度处的速度图像与地表构造特征密切有关,反映了地壳的岩性分布,呈现为断块结构;龙门山、鲜水河主要断裂及南北构造带和四川盆地清晰地成像在图上.一直被认为是隐伏存在的华蓥山断裂则鲜明地展现在20-85km深度的速度图像上.2.50±km深度处的速度图像则反映了该区的莫霍面深度明显起伏;四川盆地、徽（县）成（县）盆地和汉中盆地的地壳厚度小于50km,上地幔顶部速度约8.1km/s.龙门山以104°E为界,北段地壳厚度与四川盆地一样,中南段与川西相近.康滇地轴为四川地区地壳由东向西增厚的过渡地带.3.岩石层厚度显著变化,扬子准地台为比较活动的褶皱区,具有较厚的岩石层.4.速度结构与地震活动性存在一定的联系,该区1930年以来M≥6.0的强震震中在20^-km深度（上地壳）上的投影大都分布在速度梯度带上,成条带分布.考虑到强震的余震区大都偏高速体一侧,似乎表明,高速体有高于周围介质的剪切强度,它可能起沿断裂带凹凸体的作用.强震震中在50⁺km深度（上地幔顶部）上的投影几乎都分布在低速区及其边缘,那里壳幔间速度呈过渡关系,是软流层顶部较浅地区.     

Three-dimensional velocity model of the crust of the Bohemian Massif and its effects on seismic tomography of the upper mantle

We have compiled a representative three-dimensional P-velocity model of the crust of the Bohemian Massif (BM) to provide a basis for removing effects of the crustal structure in teleseismic tomography of the upper mantle. The model is primarily based on recently published 2D velocity models from findings of wide-angle refraction and near-vertical reflection seismic profiles of CELEBRATION 2000, ALP 2002, and SUDETES 2003 experiments. The best fitting 3D model of the BM crust (NearNeighbour model) is complemented by velocities according to the reference Earth model at sites where data are sparse, which precludes creating artificial heterogeneities that are products of interpolation method. To test the model, we have performed tomographic inversions of the P-wave travel times measured during the BOHEMA II experiment and compared the results obtained with and without crustal corrections. The tests showed that the presented crustal model decreases magnitudes of velocity perturbations leaking from the crust to the mantle in the western part of the BM. The tomographic images also indicated a highvelocity anomaly in the lower crust or just beneath the crust in the Brunovistullian unit. Such anomaly is not described by our model of the crust since no seismic profile intersects this part of the unit. The tests also indicated that crustal corrections are of the great importance especially for interpretations of the uppermost mantle down to depths of about 100 km.     

青藏高原东南缘地质构造基本形态与地震各向异性基本特征

青藏高原东南缘受印度板块NE向推挤和高原物质SE向挤出及四川盆地、华南块体阻挡的共同作用,成为高原物质SE向逃逸的关键通道。本文综述了青藏高原东南缘由不同震相和不同方法得到的不同深度的地震各向异性结果,结合区域内断裂分布、地表运动、构造应力以及深部结构等方面,全面分析了青藏高原东南缘上地壳至中下地壳及上地幔的介质各向异性与变形耦合特征。青藏高原东南缘壳幔地震各向异性的差异反映了区域内复杂的深部构造和壳幔变形。由于青藏高原形成机制、壳幔耦合状态和软弱层分布形态等科学问题尚处于学术探讨之中,有效结合不同数据和综合多种方法,有益于获得更加准确、精细的地壳—上地幔地震各向异性图像,对深部物质运动与动力模式进行更有效的约束。     

云南遮放-宾川和孟连-马龙宽角地震剖面的层析成像研究

依据有限差分反演和射线反演的方法,利用走时、振幅比和重力布格异常数据对云南地区遮放—宾川和孟连—马龙宽角地震剖面的地壳上地幔结构进行层析成像研究. 遮放—宾川测线地壳厚度为35～46km,孟连—马龙测线地壳厚度33～44.5km. 局部位置上地幔顶部P波速度值偏低,速度值变化范围大,反映出云南地区是典型的构造活动区的特点. 地壳上地幔结构存在一定程度的深浅构造一致性,意味着浅部物质活动存在深部背景. 遮放—宾川剖面速度结构显示地表怒江断裂东侧存在贯穿地壳的大规模低速异常,可能与深部物质上涌活动有关. 遮放—宾川线和孟连—马龙线速度结构显示作为一级构造单元分界线的红河断裂是超壳断裂,怒江断裂深及上地幔. 而昌宁—双江断裂显示为低角度铲式断层,意味着该断裂切割并不深. 云南地区强震的发生往往与延伸到上地幔的深大断裂有关,且一些浅源地震经常位于中上地壳深大断裂与其他断裂的交汇部位、高速块体与低速块体接触带上速度等值线弯曲的位置. 推测这样的位置有利于能量和区域应力的积累.