MODIS NDSI产品去云算法及最优阈值选择研究EI北大核心CSCD

归一化差值积雪指数NDSI (Normalized Difference Snow Index)是积雪识别中最常用的指数,但由于云的遮挡限制了MODIS NDSI产品的应用。本文提出了一种基于邻近相似像元的MODIS NDSI产品去云方法,并分析了无云NDSI序列在积雪识别中的最优阈值。对于NDSI影像上某一个云遮挡的目标像元,选取目标像元的n个邻近相似像元进行加权平均来预测该目标像元的NDSI值。以东北积雪区2017年10月1日—2018年4月31日一个积雪季的NDSI产品进行去云实验,并采用“云假设”的方法进行了检验,所预测到的云覆盖像元NDSI值与实际值的相关系数达到0.95,均方根误差为0.08。将逐日无云NDSI序列与气象站点测量的雪深序列进行对比,二者具有很好的一致性。气象站点的测量雪深大于等于1 cm时,假定该站点所在的像元为有雪像元,并以此为真值,分析无云NDSI序列在积雪识别中的最优阈值。结果表明,非森林地区NDSI阈值为0.1时积雪提取的精度最高,可以达到95.6%;森林地区的NDSI最优阈值为0,对应的积雪提取精度为93.5%。     

利用非线性NDSI模型进行积雪覆盖率反演研究

基于统计回归的积雪覆盖率反演方法适合提取大范围区域的积雪覆盖率,提出了基于归一化积雪指数(NDSI)的非线性积雪覆盖率回归模型,利用阿拉斯加、西伯利亚和内蒙古地区的样本数据进行回归分析,估计模型参数,并利用建立的回归模型提取天山地区和祁连山地区的积雪覆盖率进行了验证。结果显示,基于NDSI的非线性积雪覆盖率回归模型对样本数据的拟合度和利用模型提取的积雪覆盖率精度相对于线性模型均有一定的提高。     

FY-2C积雪判识方法研究

介绍了利用FY-2C资料进行积雪判识的原理,在阈值法基础上的辅助因子函数积雪判识方法以及相应的FY-2C积雪判识结果精度验证分析等。一般较为常用的卫星遥感积雪判识方法为简单阈值法,由于其带有一定的随机性,很难客观反映下垫面条件差异对阈值选取的影响。以阈值法为基础,将所使用的主要变量以函数形式表达,以海拔高度、地理位置、季节、土地覆盖类型等作为阈值函数的变量,通过大量采样建立起多种阈值函数,从而实现随时空特点变化的阈值实时计算。该方法用于FY-2C积雪判识,较好地解决了FY-2C全圆盘范围内广大区域不同下垫面类型下的实时积雪监测。通过与NOAA-17人机交互积雪判识结果对比分析,该方法的积雪判识精度可达85%左右。     

HJ-1B卫星遥感影像的积雪识别

针对国产卫星HJ-1B数据积雪像元识别的问题,该文分析了归一化差分积雪指数法和改进的归一化差分积雪指数法的优缺点,并根据积雪与其他地物的光谱特征变化幅度的差异性,提出了一个仅用HJ-CCD数据作为数据源的积雪识别方法。实验中,选取了两块不同特征的影像进行试验,以神经网络分类结合目视解译方法的提取结果作为标准进行精度评价。结果表明,该文提出的方法操作简单,能快速、准确地识别区域积雪覆盖面积。     

结合遥感数据与地统计学方法的海岸线超分辨率制图

使用黄河三角洲海岸Landsat卫星遥感数据,基于研究区域低分辨率6波段的海陆类型软分类结果及其变差函数,以高分辨率8波段的指示变差函数为精细尺度先验信息模型,采用数据探索性分析、协同指示克里格和序贯指示协同模拟技术,生成海陆类型发生概率模拟图像,通过等值线法提取海岸线空间分布特征。实验表明,基于地统计学方法的超分辨率制图技术在低分辨率遥感数据中融合高分辨率空间结构先验模型,可以较好表达精细尺度上的海岸线空间分布特征,同时保持原始数据的海陆类型组分信息及其空间结构特征。地统计学方法集成多尺度乃至多源空间信息的潜力通过海岸线超分辨率制图形式得到展示。     

用气象卫星资料监测积雪

本文简要叙述了利用气象卫星资料进行积雪监测的可行性和复杂性;以改进的甚高分辨率扫描辐射仪(AVHRR)资料为例综述了遥感监测积雪的原理、方法和资料处理过程;分析了计算结果,并探讨了未来积雪监测的发展。     

遥感影像制图综合的智能化研究

本文以人工智能为基础,用计算机模拟一般制图人员对遥感图像进行制图综合的过程,用框架的知识表示方法建立了一个实验性的知识库,并设计了一个推理机。对蒙古人民共和国乌布苏淖尔地区的ＴＭ分类图进行了实验,取得了较好的效果。     

海南岛土地利用的遥感调查与机助制图

海南岛土地利用调查制图在微机空间信息系统支持下,利用经几何校正的TM卫星遥感磁带数据直接转换成数字化地图。本文介绍了这次调查制图的方法,论述了海南岛土地利用现状分类以及各类土地利用的TM影像特征和有关解译标志,进行了面积统计和精度检验,并研究了各土地利用类型的特征。     

近几年我国海图制图的进展

海图测绘是海洋开发的先期性基础工作,对海图的品种、数量和质量提出更高的要求是非常自然的。为此,海图制图的科学技术研究得到了重视,并取得了一些成果。近几年来,我国的海图制图科学技术研究获得了突破性的成果,主要有下列几项: 1.海图制图自动化技术获得了成功我国海图制图长期以来处于手工作业的落后状态。80年代中期,引进了海图自动制图系     

SAR interferometric coherence analysis for snow cover mapping in the western Himalayan region

Abstract

Information of snow cover (SC) over Himalayan regions is very important for regional climatological and hydrological studies. Precise monitoring of SC in the Himalayan region is essential for water supply to hydropower stations, irrigation requirements, and flood forecasting. Microwave remote sensing has all weather, day and night earth observation capability unlike optical remote sensing. In this study, spaceborne synthetic aperture radar interferometric (InSAR) coherence analysis is used to monitor SC over Himalayan rugged terrain. The feasibility of monitoring SC using synthetic aperture radar (SAR) interferometry depends on the ability to maintain coherence over InSAR pair acquisition time interval. ERS-1/2 InSAR coherence and ENVISAT ASAR InSAR coherence images are analyzed for SC mapping. Data sets of winter and of snow free months of the Himalayan region are taken for interferogram generation. Coherence images of the available data sets show maximum decorrelation in most of the area which indicates massive snowfall in the region in the winter season and melting in the summer. Area showing coherence loss due to decorrelation is mapped as a snow-covered area. The result is validated with field observations of snow depth and it is found that standing snow is inversely related to coherence in the Himalayan region.     

Accuracy assessment of MODIS/Terra snow cover product for parts of Indian Himalayas

Snow cover mapping is important for snow and glacier-related research. The spatial and temporal distribution of snow cover area is a fundamental input to the atmospheric models, snowmelt runoff models and climate models, as well as other applications. Daily snow cover maps from Moderate Resolution Imaging Spectroradiometer (MODIS) Terra satellite were retrieved for the period between 2004 and 2007, and pixels in these images were classified as cloud, snow or snow-free. These images have then been compared with ground snow depth (SD) measurements from the four observatories located at different parts of Himalayas. Comparison of snow maps with in situ data showed good agreement with overall accuracies in between 78.15 and 95.60%. When snow cover was less, MODIS data were found to be less accurate in mapping snow cover region. As the SD increases, the accuracy of MODIS snow cover maps also increases.     

基于光谱和纹理特征的山区高分辨率遥感影像分类

本文在只做阴影补偿而不做地形校正的情况下,使用光谱和纹理特征相结合的方法进行山区高分辨率遥感影像分类。实验取得了78%的分类精度,表明该方法合理可行,具有一定的实用性。     

Evaluation of different machine learning methods for land cover mapping of a Mediterranean area using multi-seasonal Landsat images and Digital Terrain Models

Land cover monitoring using digital Earth data requires robust classification methods that allow the accurate mapping of complex land cover categories. This paper discusses the crucial issues related to the application of different up-to-date machine learning classifiers: classification trees (CT), artificial neural networks (ANN), support vector machines (SVM) and random forest (RF). The analysis of the statistical significance of the differences between the performance of these algorithms, as well as sensitivity to data set size reduction and noise were also analysed. Landsat-5 Thematic Mapper data captured in European spring and summer were used with auxiliary variables derived from a digital terrain model to classify 14 different land cover categories in south Spain. Overall, statistically similar accuracies of over 91% were obtained for ANN, SVM and RF. However, the findings of this study show differences in the accuracy of the classifiers, being RF the most accurate classifier with a very simple parameterization. SVM, followed by RF, was the most robust classifier to noise and data reduction. Significant differences in their performances were only reached for thresholds of noise and data reduction greater than 20% (noise, SVM) and 25% (noise, RF), and 80% (reduction, SVM) and 50% (reduction, RF), respectively.     

基于MODIS雪盖数据的北疆雪深多元非线性回归克里金插值

为了提高北疆地区雪深时空分布监测的准确性,以该区域48个气象站点2006年12月—2007年1月的月平均雪深观测数据为基础,通过分析月均雪深空间自相关性及其与经纬度、高程的相关性,结合MODIS雪盖数据构建了多元非线性回归克里金插值方法,插值获得了北疆地区较高精度的雪深空间分布数据。将插值雪深数据与普通克里金插值法、考虑高程为辅助变量的协同克里金插值法的预测结果进行比较,结果表明:1相对普通克里金和协同克里金方法,多元非线性回归克里金法的12月份雪深预测精度分别提高了15.14%和9.54%,1月份的提高了4.8%和6.7%;2由于充分利用了经纬度和地形信息,多元非线性回归克里金法的雪深预测结果可提供更多细节信息;3预测结果客观地表达了雪深随经纬度和地形变化的趋势,反映了积雪深度的空间变异性;4基于不显著相关的协变量高程的协同克里金插值法预测的雪深数据精度劣于普通克里金插值法的预测结果。     

全球地表覆盖制图研究新范式

全球土地覆盖制图在过去的10年中取得重要进展,空间分辨率从300 m增加至30 m,分类详细程度也有所提高,从10余个一级类到包含29类的二级分类体系。然而,利用光学遥感数据在大空间范围制图方面仍有诸多挑战。本文主要介绍在农田、居住区、水体和湿地制图方面的挑战,讨论在使用多时相和多传感器遥感数据上的困难,这将是未来遥感应用的趋势。由于各种地表覆盖数据产品有自己定义的地表覆盖类型体系和处理流程,通过调和以及集成各种全球土地覆盖制图产品能够满足新的应用目的,并且可以最大程度地利用已有的土地覆盖数据。然而,未来全球土地覆盖制图需要能够按照新应用需求动态生成地表覆盖数据产品的能力。过去的研究表明有效地提高局部尺度制图的分类精度,更好的算法、更多种特征变量(新类型的数据或特征)以及更具代表性的训练样本都非常重要。我们却认为特征变量的使用更重要。本文提出了一个全球土地覆盖制图的新范式。在这个新范式中,地表覆盖类型的定义被分解为定性指标的类、定量指标的植被郁闭度和高度。非植被类型通过它们的光谱和纹理信息提取。复合考虑类、郁闭度和高度3种指标来定义和区别包含植被的地表覆盖类型。郁闭度和高度不能在分类算法中提取,需要借助其他直接测量或间接反演方法。新的范式还表明,一个普遍适用的训练样本集有效地提高了在非洲大陆尺度土地覆盖分类。为了确保更加容易地实现从传统的土地覆盖制图到全球土地覆盖制图新范式的转变,建议构建一体化的数据管理和分析系统。通过集成相关的观测数据、样本数据和分析算法,逐步建成全球土地覆盖制图在线系统,构建全球地表覆盖制图门户网站,为数据生产者、数据用户、专业研究人员、决策人员搭建合作互助的平台。     

近10年新疆积雪面积时空变化研究

区域尺度积雪信息的时空监测对确定雪灾的影响范围及灾情等级划分具有重要意义。本文利用近10年的MODIS积雪产品,按月最大面积的规则合成;分析了新疆积雪覆盖面积的时空变化特征,结果表明:时间上,新疆积雪面积有减少的趋势。空间上,近10年新疆积雪季节内永久性积雪覆盖区域主要分布在阿勒泰山脉、天山北麓及沿昆仑山脉西南部。其中天山及阿尔泰山之间的河谷及盆地的草原积雪面积波动主导了新疆整体积雪总面积的波动。     

天山典型林带积雪的多角度遥感识别

天山中段的山地针叶林带很大程度上影响了该地区整体卫星雪盖的识别精度,多角度卫星遥感技术的发展为林区积雪识别提供了新的途径。本文选取了2000年4月至2001年6月,10个时段研究区内无云覆盖的(Multi-angle Imaging Spectro Radiometer)MISR多角度数据,首先对红光波段不同角度观测结果组成的角度谱图像进行非监督分类,以确定天山林带的分布区域,然后在玛纳斯河中下游与那拉提山东部选取典型像元,分析这些像元红光波段各角度反射率在林区不同积雪覆盖状况下的表现差异。研究发现,若林区存在积雪,0°,±26.1°,±45.6°五个观测角度反射率的平均值大于0.1,在部分降雪月份,后向45.6°观测的反射率大于天顶方向观测的2.5倍。根据这一结论,给出基于MISR数据的研究区不同时段的积雪识别结果。结果表明,MISR红光波段对林区积雪反应敏感,不同角度观测的反射率在林区有雪和无雪时差异较大,故可利用多角度遥感信息进行林区积雪识别。     

Synergy of airborne LiDAR and Worldview-2 satellite imagery for land cover and habitat mapping: A BIO_SOS-EODHaM case study for the Netherlands

A major challenge is to develop a biodiversity observation system that is cost effective and applicable in any geographic region. Measuring and reliable reporting of trends and changes in biodiversity requires amongst others detailed and accurate land cover and habitat maps in a standard and comparable way. The objective of this paper is to assess the EODHaM (EO Data for Habitat Mapping) classification results for a Dutch case study. The EODHaM system was developed within the BIO_SOS (The BIOdiversity multi-SOurce monitoring System: from Space TO Species) project and contains the decision rules for each land cover and habitat class based on spectral and height information. One of the main findings is that canopy height models, as derived from LiDAR, in combination with very high resolution satellite imagery provides a powerful input for the EODHaM system for the purpose of generic land cover and habitat mapping for any location across the globe. The assessment of the EODHaM classification results based on field data showed an overall accuracy of 74% for the land cover classes as described according to the Food and Agricultural Organization (FAO) Land Cover Classification System (LCCS) taxonomy at level 3, while the overall accuracy was lower (69.0%) for the habitat map based on the General Habitat Category (GHC) system for habitat surveillance and monitoring. A GHC habitat class is determined for each mapping unit on the basis of the composition of the individual life forms and height measurements. The classification showed very good results for forest phanerophytes (FPH) when individual life forms were analyzed in terms of their percentage coverage estimates per mapping unit from the LCCS classification and validated with field surveys. Analysis for shrubby chamaephytes (SCH) showed less accurate results, but might also be due to less accurate field estimates of percentage coverage. Overall, the EODHaM classification results encouraged us to derive the heights of all vegetated objects in the Netherlands from LiDAR data, in preparation for new habitat classifications.     

Multi-resolution integration of land cover for sub-pixel estimation of urban impervious surface and forest cover

Abstract

A methodology is presented for estimating percent coverage of impervious surface (IS) and forest cover (FC) within Landsat thematic mapper (TM) pixels of urban areas. High-resolution multi-spectral images from Quickbird (QB) play a key role in the sub-pixel mapping process by providing information on the spatial distributions of ISs and FCs at 2.4 m ground sampling intervals. Thematic classifications, also derived from the Landsat imagery, have then been employed to define relationships between 30 m Landsat-derived greenness values and percent IS and FC. By also utilizing land cover/land use classification derived from Landsat and defining unique relationships for urban sub-classes (i.e. residential, commercial/industrial, open land), confusion between impervious and fallow agricultural lands has been overcome. Test results are presented for Ottawa-Gatineau, an urban area that encompasses many aspects typical of the North American urban landscape. Multiple QB scenes have been acquired for this urban centre, thereby allowing us to undertake an in-depth study of the error budgets associated with the fractional inference process.