GEOLOGY OF MT. PHULCHOKI AREA, CENTRAL NEPAL

GEOLOGY OF MT. PHULCHOKI AREA, CENTRAL NEPAL     

西藏尼木变质岩特征及变质温压条件

出露于雅鲁藏布江缝合带北侧尼木县的变质岩主要由石榴黑云片麻岩和黑云斜长角闪角岩组成.研究表明岩石变质程度达到角闪角岩相-辉石角岩相;石榴子石变斑晶具有生长环带,角闪石均为钙质角闪石,黑云母大多为铁质黑云母和铁叶云母,长石多为更长石和中长石,少量为正长石.利用石榴子石-黑云母温度计、石榴子石-黑云母-斜长石-石英压力计和角闪石-斜长石温度及压力计计算获得石榴黑云片麻岩和黑云斜长角闪角岩的变质温度分别为619 ～661℃,695 ～ 702℃,压力范围分别为1.86～1.94kbar和3.69～4.56kbar.野外和室内研究认为岩石原岩为冈底斯带南缘叶巴组火山岩及其上部沉积岩,岩石经历了高温低压的接触变质作用.结合已有冈底斯带陆缘岩浆活动特征,对变质岩的形成环境和过程进行了反演.     

Cenomanian dinosaur tracks on the islet of Fenoliga in southern Istria, Croatia

One hundred and forty six dinosaur footprints occur on the Cenomanian outcrop of Fenoliga. They are arranged in six trackways and six footprint groups (a–f). Two basic footprint types can be distinguished: firstly, large circular-elliptical sauropod footprints, forming four trackways (I, III, V, VI) and five footprint groups (a–e), and secondly, smaller, tridactyl theropod footprints forming two trackways (II and IV) and one footprint group (f). Three type specimens, one sauropod and two theropod, were determined during the course of the work. Since no dinosaur bones have been discovered in the Cenomanian rocks of Istria so far, these findings are outstandingly important in the analysis of the regional dinosaur fauna.     

Fluid Evolution and Ore‐forming Processes of the Jiama Cu Deposit,Tibet: Evidence from Fluid Inclusions

The Jiama deposit is a large copper deposit in Tibet. Mineralization occurs in three different host rocks: skarn, hornfels and porphyry. A detailed fluid inclusion study was conducted for veins in the different host rocks to investigate the relationship between fluid evolution and ore-forming processes. Based on examination of cores from 36 drill holes, three types of veins(A, B and D) were identified in the porphyries, four types(Ⅰ,Ⅱ,Ⅲ andⅣ) in the skarn, and three(a, b and c) in the hornfels. The crosscutting relationships of the veins and that of the host rocks suggest two hydrothermal stages, one early and one late stage. Fluid inclusions indicate that the Jiama hydrothermal fluid system underwent at least two episodes of fluid boiling. The first boiling event occurred during the early hydrothermal stage, as recorded by fluid inclusions hosted in type A veins in the porphyries, type a veins in the hornfels, and wollastonite in the skarns. This fluid boiling event was associated with relatively weak mineralization. The second boiling event occurred in the late hydrothermal stage, as determined from fluid inclusions hosted in type B and D veins in the porphyries, type Ⅰ to Ⅳ veins in the skarns, and type b and c veins in the hornfels. This late boiling event, together with mixing with meteoric water, was responsible for more than 90% of the metal accumulation in the deposit. The first boiling only occurred in the central part of the deposit and the second boiling event took place across an entire interlayered structural zone between hornfels and marble. A spatial zoning of ore-elements is evident, and appears to be related to different migration pathways and precipitation temperatures of Cu, Mo, Pb, Zn, Au and Ag.     

Amphiboles of the Khibiny alkaline pluton, Kola Peninsula, Russia

The rocks of the Khibiny pluton contain 25 amphibole varieties, including edenite, fluoredenite, kaersutite, pargasite, ferropargasite, hastingsite, magnesiohastingsite, katophorite, ferrikatophorite, magnesiokatophorite, magnesioferrikatophorite, magnesioferrifluorkatophorite, ferrimagnesiotaramite, ferrorichterite, potassium ferrorichterite, richterite, potassium richterite, potassium fluorrichterite, arfvedsonite, potassium arfvedsonite, magnesioarfvedsonite, magnesioriebeckite, ferriferronyboite, ferrinyboite, and ferroeckermannite. The composition of rock-forming amphiboles changes symmetrically relative to the Central Ring of the pluton; i.e., amphiboles enriched in K, Ca, Mg, and Si are typical of foyaite near and within the Central Ring. The Fe and Mn contents in amphiboles increase in the direction from marginal part of the pluton to its center. Foyaite of the marginal zone contains ferroeckermannite, richterite, arfvedsonite, and ferrorichterite; edenite is typical of foyaite and hornfels of the Minor Arc. Between the Minor Arc and the Central Ring, foyaite contains ferroeckermannite, arfvedsonite, and richterite; amphiboles in rischorrite, foidolite and hornfels of the Central Ring are (potassium) arfvedsonite, (potassium) richterite, magnesiokatophorite, magnesioarfvedsonite, ferroeckermannite, and ferriferronyboite; amphiboles in foyaite within the Central Ring, in the central part of the pluton, are arfvedsonite, magnesioarfvedsonite, ferriferronyboite, katophorite, and richterite. It is suggested that such zoning formed due to the alteration of foyaite by a foidolite melt intruded into the Main (Central) Ring Fault.     

Oxidation of aqueous Cr(III) at birnessite surfaces: constraints on reaction mechanism

X-ray Photoelectron Spectroscopy (XPS) was used to investigate oxidation of aqueous Cr(III) at the surface of 7 Å-birnessite [MnO_1.75(OH)_0.25]. Special emphasis was placed on detection of intermediate oxidation states of chromium due to their critical environmental significance. No previous studies have been able to identify these intermediate oxidation states of chromium (namely, Cr[IV] and Cr[V]) on mineral surfaces or in natural solutions. Mn(2p_3/2), Cr(2p_3/2) and O(1s) spectra of the reacted surfaces reveal that Mn(IV) of synthetic birnessite undergoes reductive dissolution in two steps. The first step involves Mn(IV) reduction to Mn(III),that forms at the oxide surface probably as an oxyhydroxide (MnOOH), and in the second step Mn(III) is reduced to Mn(II) that is subsequently taken into solution. Each reductive reaction step involves transfer of only one electron to the Mn ion. After Cr(III)_aq is adsorbed onto the MnO₂ surface, it undergoes oxidation in three separate steps, each involving the loss of one electron to Mn ions, so that Cr(IV), Cr(V) and Cr(VI) are produced. The intermediate reaction products, namely Mn(III), and Cr(V) were positively identified by XPS spectral analyses. Similarity in XPS binding energy values of Cr(III) and Cr(IV) as well as that of Cr(V) and Cr(VI), however, preclude separate identification of Cr(III) from Cr(IV) and Cr(VI) from Cr(V) multiplets on the near-surface of the solid. A parallel reaction scheme (exclusive of sorption reactions) best describes the birnessite-Cr(III)_aq redox reactions. The two parallel reactions proceed by separate mechanisms with a monodentate complex formed in one mechanism and a bidentate complex in another. The bulk of Cr(IV) probably is formed via the monodentate complex and Cr(V) via the bidentate complex. The rate expressions associated with these reactions display near-perfect correlation with changing surface abundances of Cr(IV) and Cr(V) as a function of reaction time. Copyright © 1999 Elsevier Science Ltd.     

Adsorption of Fe(II) and U(VI) to carboxyl-functionalized microspheres: The influence of speciation on uranyl reduction studied by titration and XAFS

The chemical reduction of U(VI) by Fe(II) is a potentially important pathway for immobilization of uranium in subsurface environments. Although the presence of surfaces has been shown to catalyze the reaction between Fe(II) and U(VI) aqueous species, the mechanism(s) responsible for the enhanced reactivity remain ambiguous. To gain further insight into the U-Fe redox process at a complexing, non-conducting surface that is relevant to common organic phases in the environment, we studied suspensions containing combinations of 0.1 mM U(VI), 1.0 mM Fe(II), and 4.2 g/L carboxyl-functionalized polystyrene microspheres. Acid-base titrations were used to monitor protolytic reactions, and Fe K-edge and U L-edge X-ray absorption fine structure spectroscopy was used to determine the valence and atomic environment of the adsorbed Fe and U species. In the Fe + surface carboxyl system, a transition from monomeric to oligomeric Fe(II) surface species was observed between pH 7.5 and pH 8.4. In the U + surface carboxyl system, the U(VI) cation was adsorbed as a mononuclear uranyl-carboxyl complex at both pH 7.5 and 8.4. In the ternary U + Fe + surface carboxyl system, U(VI) was not reduced by the solvated or adsorbed Fe(II) at pH 7.5 over a 4-month period, whereas complete and rapid reduction to U(IV) nanoparticles occurred at pH 8.4. The U(IV) product reoxidized rapidly upon exposure to air, but it was stable over a 4-month period under anoxic conditions. Fe atoms were found in the local environment of the reduced U(IV) atoms at a distance of 3.56 Å. The U(IV)-Fe coordination is consistent with an inner-sphere electron transfer mechanism between the redox centers and involvement of Fe(II) atoms in both steps of the reduction from U(VI) to U(IV). The inability of Fe(II) to reduce U(VI) in solution and at pH 7.5 in the U + Fe + carboxyl system is explained by the formation of a transient, “dead-end” U(V)-Fe(III) complex that blocks the U(V) disproportionation pathway after the first electron transfer. The increased reactivity at pH 8.4 relative to pH 7.5 is explained by the reaction of U(VI) with an Fe(II) oligomer, whereby the bonds between Fe atoms facilitate the transfer of a second electron to the hypothetical U(V)-Fe(III) intermediate. We discuss how this mechanism may explain the commonly observed higher efficiency of uranyl reduction by adsorbed or structural Fe(II) relative to aqueous Fe(II).     

Compositional zonation in garnets in peridotite xenoliths

Garnets in 42 peridotite xenoliths, most from southern Africa, have been analyzed by electron probe to seek correlations between compositional zonation and rock history. Xenoliths have been placed into the following 6 groups, based primarily upon zonation in garnet: I (12 rocks)-zonation dominated by enrichment of Ti and other incompatible elements in garnet rims; II (10 rocks)-garnet nearly homogeneous; III (8 rocks)-rims depleted in Cr, with little or no related zonation of Ti; IV (3 rocks)-slight Ti zonation sympathetic to that of Cr; V (3 rocks)-garnet rims depleted or enriched in Cr, and chromite included in garnet; VI (6 rocks)-garnets with other characteristics. Element partitioning between olivine, pyroxene, and garnet rims generally is consistent with the assumption of equilibrium before eruption. Although one analyzed rock contains olivine and pyroxene that may have non-equilibrated oxygen isotopes, no corresponding departures from chemical equilibrium were noted. Causes of zoning include melt infiltration and changes in temperature and pressure. Zonation was caused or heavily influenced by melt infiltration in garnets of Group I. In Groups III, IV, and V, most compositional gradients in garnets are attributed to changes in temperature, pressure, or both, and gradients of Cr are characteristic. There are no simple relationships among wt% Cr₂O₃ in garnet, calculated temperature, and the presence of compositional gradients. Rather, garnets nearly homogeneous in Cr are present in rocks with calculated equilibration temperatures that span the range 800–1500 °C. Although the most prominent Cr gradients are found in relatively Cr-rich garnets of rocks for which calculated temperatures are below 1050 °C, gradients are well-defined in a Group IV rock with T1300 °C. The variety of Cr gradients in garnets erupted from a range of temperatures indicates that the zonations record diverse histories. Petrologic histories have been investigated by simulated cooling of model rock compositions in the system CaO–MgO–Al₂O₃–SiO₂–Cr₂O₃. Proportions and compositions of pyroxene and garnet were calculated as functions of P and T. The most common pattern of zonation in Groups III and IV, a decrease of less than 1 wt% Cr₂O₃ core-to-rim, can be simulated by cooling of less than 200 °C or pressure decreases of less than 1 GPa. The preservation of growth zonation in garnets with calculated temperatures near 1300 °C implies that these garnets grew within a geologically short time before eruption, probably in response to fast cooling after crystallization of a small intrusion nearby. Progress in interpreting garnet zonations in part will depend upon determinations of diffusion rates for Cr. Zonation formed by diffusion within garnet cannot always be distinguished from that formed by growth, but Ca–Cr correlations unlike those typical of peridotite suite garnets may document diffusion.     

METASOMATIC ZONALITY AND GENESIS OF SAPPHIRINE-BEARING ROCKS IN THE BUG REGION

Precambrian sapphirine-bearing rocks were discovered in the core of a borehole on the River Bug in the zone of the metasomatic changes of the pyroxene body. Their origin is a particular case of regional granitization and takes place in connection with the formation of charnockite. The area of modified pyroxenite, 1.7m thick in the core, has a symmetrical zonal structure and is subdivided into six subzones (in the direction to the center). I. Pyroxenite, serpentinized, carbonatized pyroxenite (initial rocks); II. Diopside-phlogopite-anorthite; III. Corundum-anorthite phlogopite; IV. Sapphirine -corundum- microcline -biotite; V. Corundum-sillimanite-sapphirine-microcline; VI. Sillimanite-sapphirine-corundum-prismatine-microcline. The minerals are not unstable together, some are replaced by others with a general tendency to forming a microcline rock. --Author's English Summary.     

Distribution and bioavailability of Cr in central Euboea, Greece

Plants and soils from central Euboea, were analyzed for Cr_(totai), Cr(VI), Ni, Mn, Fe and Zn. The range of metal concentrations in soils is typical to those developed on Fe-Ni laterites and ultramafic rocks. Their bioavailability was expressed in terms of concentrations extractable with EDTA and 1 M HNO₃, with EDTA having a limited effect on metal recovery. Cr(VI) concentrations in soils evaluated by alkaline digestion solution were lower than phytotoxic levels. Chromium and Ni — and occasionally Zn — in the majority of plants were near or above toxicity levels. Cr(VI) concentrations in plants were extremely low compared to total chromium concentrations. Cr_(total) in ground waters ranged from <1 μg.L^?1 to 130 μg.L^?1, with almost all chromium present as Cr(VI). With the exception of Cr_(total) and in some cases Zn, all elements were below regulatory limits for drinking water. On the basis of Ca, Mg, Cr_(total) and Si ground waters were classified into three groups: Group(I) with Cr concentrations less than 1 μg.L^?1 from a karstic aquifer; Group(II) with average concentrations of 24 μg.L^?1 of Cr and relatively high Si associated with ophiolites; and Group(III) with Cr concentrations of up to 130 μg.L^?1, likely due to anthropogenic activity. Group(III) is comparable to ground waters from Assopos basin, characterized by high Cr(VI) concentrations, probably due to industrial actrivities.     

Geology and ore genesis of the late Paleozoic Heijianshan Fe oxide–Cu (–Au) deposit in the Eastern Tianshan,NW China

The Heijianshan Fe–Cu (–Au) deposit, located in the Aqishan-Yamansu belt of the Eastern Tianshan (NW China), is hosted in the mafic–intermediate volcanic and mafic–felsic volcaniclastic rocks of the Upper Carboniferous Matoutan Formation. Based on the pervasive alteration, mineral assemblages and crosscutting relationships of veins, six magmatic–hydrothermal stages have been established, including epidote alteration (Stage I), magnetite mineralization (Stage II), pyrite alteration (Stage III), Cu (–Au) mineralization (Stage IV), late veins (Stage V) and supergene alteration (Stage VI). The Stage I epidote–calcite–tourmaline–sericite alteration assemblage indicates a pre-mineralization Ca–Mg alteration event. Stage II Fe and Stage IV Cu (–Au) mineralization stages at Heijianshan can be clearly distinguished from alteration, mineral assemblages, and nature and sources of ore-forming fluids.Homogenization temperatures of primary fluid inclusions in quartz and calcite from Stage I (189–370 °C), II (301–536 °C), III (119–262 °C) and V (46–198 °C) suggest that fluid incursion and mixing probably occurred during Stage I to II and Stage V, respectively. The Stage II magmatic–hydrothermal-derived Fe mineralization fluids were characterized by high temperature (>300 °C), medium–high salinity (21.2–56.0 wt% NaCl equiv.) and being Na–Ca–Mg–Fe-dominated. These fluids were overprinted by the external low temperature (<300 °C), medium–high salinity (19.0–34.7 wt% NaCl equiv.) and Ca–Mg-dominated basinal brines that were responsible for the subsequent pyrite alteration and Cu (–Au) mineralization, as supported by quartz CL images and H–O isotopes. Furthermore, in-situ sulfur isotopes also indicate that the sulfur sources vary in different stages, viz., Stage II (magmatic–hydrothermal), III (basinal brine-related) and IV (magmatic–hydrothermal). Stage II disseminated pyrite has δ³⁴S_fluid values of 1.7–4.3‰, comparable with sulfur from magmatic reservoirs. δ³⁴S_fluid values (24.3–29.3‰) of Stage III Type A pyrite (coexists with hematite) probably indicate external basinal brine involvement, consistent with the analytical results of fluid inclusions. With the basinal brines further interacting with volcanic/volcaniclastic rocks of the Carboniferous Matoutan Formation, Stage III Type B pyrite–chalcopyrite–pyrrhotite assemblage (with low δ³⁴S_fluid values of 4.6–10.0‰) may have formed at low fO₂ and temperature (119–262 °C). The continuous basinal brine–volcanic/volcaniclastic rock interactions during the basin inversion (∼325–300 Ma) may have leached sulfur and copper from the rocks, yielding magmatic-like δ³⁴S_fluid values (1.5–4.1‰). Such fluids may have altered pyrite and precipitated chalcopyrite with minor Au in Stage IV. Eventually, the Stage V low temperature (∼160 °C) and low salinity meteoric water may have percolated into the ore-forming fluid system and formed late-hydrothermal veins.The similar alteration and mineralization paragenetic sequences, ore-forming fluid sources and evolution, and tectonic settings of the Heijianshan deposit to the Mesozoic Central Andean IOCG deposits indicate that the former is probably the first identified Paleozoic IOCG-like deposit in the Central Asian Orogenic Belt.     

Alkali Amphiboles from the Blueschists of Cazadero, California

Alkali amphiboles from Type III and Type IV metamorphic zonesin blueschist facies rocks of Cazadero, California, and fromcomparable New Caledonian rocks have been characterized by X-raycrystallographic, optical, and chemical methods. The compositionof any particular alkali amphibole is strongly controlled bythe bulk composition of the host rock. Within the blueschistfacies, metamorphic zones are not characterized by changes inamphibole composition. All the alkali amphiboles studied hereinbelong to the C2/m space group and complete miscibility betweenglaucophane and riebeckite has been demonstrated for the conditionsprevailing during metamorphism in the Cazadero and New Caledonianblueschists. Linear relationships are found between unit-celldimensions and variations in composition between glaucophaneand riebeckite. The alkali amphiboles of glaucophane compositionsbelong to the high pressure-low temperature series, glaucophaneII-riebeckite. Limited miscibility of actinolite in glaucophanemay be characteristic of blueschist facies metamorphism.     

Abiotic reduction of uranium by Fe(II) in soil

Structural Fe(II) has been shown to reduce several oxidized environmental contaminants, including NO₃, chlorinated solvents, Cr(VI), and U(VI). Studies investigating reduction of U(VI) by soils and sediments, however, suggest that abiotic reduction of U(VI) by Fe(II) is not significant, and that direct enzymatic reduction of U(VI) by metal-reducing bacteria is required for U(VI) immobilization as U(IV). Here evidence is presented for abiotic reduction and immobilization of U(VI) by structural Fe(II) in a redoximorphic soil collected from a hillside spring in Iowa. Oxidation of Fe(II) in the soil after reaction with U(VI) was demonstrated by Mössbauer spectroscopy and reduction of U(VI) by the pasteurized soil using U L_III-edge X-ray absorption spectroscopy (XAS). XAS indicates that both reduced U(IV) and oxidized U(VI) or U(V) are present after U(VI) interaction with the Fe(II) containing soil. The EXAFS data show the presence of a non-uraninite U(IV) phase and evidence of the oxidized U(V) or U(VI) fraction being present as a non-uranyl species. Little U(VI) reduction is observed by soil that has been exposed to air and oxidation of Fe(II) to goethite has occurred. Soil characterization based on chemical extractions, Mössbauer spectroscopy, and Fe K-edge XAS indicate that the majority of Fe(II) in the soil is structural in nature, existing in clay minerals and possibly a green rust-like phase. These data provide compelling evidence for abiotic reduction of U(VI) by structural Fe(II) from soil near Fe-rich oxic–anoxic boundaries in natural environments. The work highlights the potential for abiotic reduction of U(VI) by Fe(II) in reduced, Fe-rich environments.     

Unscrambling the stratigraphy of an Archean greenstone belt; a U---Pb geochronological study of the Favourable Lake belt, northwestern Ontario, Canada

New zircon and baddeleyite U---Pb ages show that the major units of the Archean Favourable Lake greenstone belt in the northern Superior Province were formed by episodic magmatism spanning more than 250 Ma and demonstrate that the original stratigraphy is disrupted by thrusts that juxtaposed older supracrustal rocks on top of younger ones. The oldest rocks of the area are a 2950 Ma gneissic tonalite and a 3000-2960 Ma granodiorite clast from a ca. 2725 Ma conglomerate. Five distinct volcanic (and sedimentary) groups formed during presumably short-lived episodes at 2925 Ma (I), 2870 Ma (II), 2858 Ma (III), 2734 Ma (IV), and 2725 Ma (V). The youngest group contains the thickest sedimentary unit, a turbiditic and alluvial-fluvial sequence. Compression caused thrusting that placed Groups I and V on top of IV, III on V, and II on III. The thrust complex was subsequently isoclinally folded. Compression was accompanied by major plutonism that emplaced the bulk of the bounding batholiths between 2732 and 2711 Ma ago. The late tectonic, Mo-mineralized Setting Net Lake Stock in the centre of the belt has an age of about 2708 Ma and was overprinted by younger hydrothermal events that produced monazite (2706 Ma), titanite (ca. 2695-2690 Ma) and rutile (the youngest rutile at 2657 Ma). Similar late hydrothermal pulses are recorded by secondary titanite elsewhere in the belt and within the batholiths. The protracted magmatic evolution of the belt is typical of that observed in a number of greenstone belts of the northern Superior Province but is uncommon farther to the south. In contrast, the structural complications and put-of-sequence stratigraphy appear to be a quite common tectonic characteristic of greenstone belts of the whole Superior Province.     

Mean concentrations of volatile components,major and trace elements in magmatic melts in major geodynamic environments on Earth. I. Mafic melts

Mean concentrations of major components, trace elements, and volatile components in magmatic melts from Earth’s major geodynamic environments are estimated using our database (which comprises more than 1200000 analyses for 75 chemical elements—state for the beginning of 2016) on melt inclusions and quench glasses of rocks). The geodynamic environments are classified into (I) environments of oceanic plate spreading (mid-oceanic ridges), (II) areas affected by mantle plumes in oceanic plates (oceanic islands and lava plateaus), (III and IV) subduction-related environments (III are magmatic zones in island arcs, and IV are magmatic zones in active continental margins, in which magma-generating processes involve the continental crust), (V) continental rifts in areas with continental hotspots, and (VI) backarc spreading zones. The distribution of SiO₂ concentrations (>71000 analyses) in natural magmatic melts in all geodynamic environments is obviously bimodal, with maxima at 50–52 and 72–76 wt % SiO₂. Herein we discuss only mafic melts (40–54 wt % SiO₂). Mean concentrations and confidence levels are calculated for each geodynamic environment for the first time in three variants: from melt inclusions in minerals, from quench glasses in rocks, and from all data. Systematic variations in the mean compositions of melt inclusions and glasses in rocks are detected for all geodynamic environments. Primitive mantle-normalized multielemental patterns for mean concentrations of elements are constructed for magmatic melts from all geodynamic environments, and the mean ratios and their variations are calculated for trace incompatible and volatile components (H₂O/Ce, K₂O/Cl, La/Y, Nb/U, Ba/Rb, Ce/Pb, etc.) in melts from all environments.     

Age of zircon from apoharzburgite serpentinite representing mantle of the Uralian paleoocean

Over 60 zircon grains from apoharzburgite serpentinite were dated using SHRIMP–IIe/mc at the Laboratory IBERSIMS of the Granada University (Spain). The apoharzburgite serpentinite represents an oceanic mantle of the Uralian paleoocean, which was exhumed in the crustal structures of the Paleozoic Ural Mobile Belt during obduction. Individual grains span a huge ²⁰⁶Pb/²³⁸U age range from 2740 to 250 Ma and are clustered into six discrete age groups (in Ma): (I) > 2500, (II) 2500–1950, (III) 1260–1210, (IV) 480–400, (V) 370–330, and (VI) < 280. Two last groups were formed under the effect of granitoids on serpentinites. The traces of this effect were studied in outcrops and confirmed by age of zircon from contact talc–carbonate rock. The morphologies of zircon crystals from serpentinite bear signs typical of both magmatic and metamorphic varieties, which indicate their polygenetic–polychronous nature. No striking morphological features and peculiar U and Th contents were found in the studied zircons to discriminate unambiguously between different age groups. Pre-Paleozoic events with ages of groups I–III were found in zircons from many oceanic mantle rocks. The similarity of age groups of zircons from Paleozoic and modern oceanic lithosphere is caused by global mantle reworkings, which provoke magma generation and metasomatism probably accompanied by zircon crystallization.     

Pyroxenes of the Khibiny alkaline pluton, Kola Peninsula

Seven pyroxene varieties were identified in nepheline syenites and foidolites of the Khibiny pluton: enstatite, ferrosilite, diopside, hedenbergite, augite, aegirine-augite, and aegirine. Enstatite and augite are typical of alkaline and ultramafic rocks of dike series. Ferrosilite was found in country quartzitic hornfels. Diopside is a rock-forming mineral in alkaline and ultramafic rocks, alkali gabbroids, hornfels in xenoliths of volcanic and sedimentary rocks and foyaite, melteigite-urtite that assimilate them, and certain hydrothermal pegmatite veins. Hedenbergite was noted in hornfels from xenoliths of volcanic and sedimentary rocks and in a hydrothermal pegmatite vein at Mount Eveslogchorr. Aegirine-augite is the predominant pyroxene in all types of nepheline syenites, phonolites and tinguaites, foidolites, alkaline and ultramafic rocks of dike series, fenitized wall rocks surrounding the pluton, and xenoliths of Devonian volcanic and sedimentary rocks. Aegirine is an abundant primary or, more often, secondary mineral in nepheline syenites, foidolites, and hydrothermal pegmatite veins. It occurs as separate crystals, outer zones of diopside and aegirine-augite crystals, and homoaxial pseudomorphs after Na-Ca amphiboles. Microprobe analyses of 265 pyroxenes samples allowed us to distinguish ten principal trends of isomorphic replacement and corresponding typomorphic features of pyroxenes. Compositional variations in clinopyroxenes along the sampled 35-km profile from the margin of the Khibiny pluton to its center confirm the symmetric zoning of the foyaite pluton relative to semicircular faults of the Minor Arc and the Main (Central) Ring marked by Devonian volcanic and sedimentary rocks, foidolites, and related metasomatic rocks (rischorrite, albitite, and aegirinite). Changes in the composition of pyroxenes are explained mainly by the redistribution of elements between coexisting minerals of foyaites in the process of their intense differentiation under the effect of foidolite melts that have intruded into the circular fault zones.     

Hydrothermal alteration and K–Ar ages of Neogene‐Quaternary magmatic‐hydrothermal systems at Toyoha‐Muine area in southwest Hokkaido,Japan

This paper presents a review of hydrothermal alteration and K–Ar age data from the Toyoha‐Muine area (TMA), where the Toyoha polymetallic (Ag–Pb–Zn–Cu–In) deposit is located near the Pliocene andesitic volcano that formed Mt Muine. Systematic prospect‐scale mapping, sampling, X‐ray analysis and microscopic observation show that hydrothermal alteration is divided into two groups: acid‐pH and neutral‐pH alteration types. The former is further divided into mineral assemblages I, II and III, while the latter into mineral assemblages IV and V. Different mineralogical features in five mineral assemblages are summarized as follows: (I) Quartz (silicified rock); (II) Pyrophyllite or dickite; (III) Kaolinite or halloysite ± alunite; (IV) Sericite or K‐feldspar; and (V) Interstratified minerals (illite/smectite and chlorite/smectite) and/or smectite. K–Ar radiometric ages determined on twenty‐eight K‐bearing samples (whole volcanic rocks and separated hydrothermal minerals) mainly fall into one of three periods: Early Miocene (24.6–21.4 Ma), Middle–Late Miocene (12.5–8.4 Ma) and Pliocene–Pleistocene (3.2–0 Ma). These three periods are characterized as follows. Early Miocene: A minor hydrothermal activity, which might be genetically related to the intermediate or felsic magmatic activities, formed mineral assemblage IV at 24.6 Ma in the northern part of the TMA. Middle to Late Miocene: The basaltic intrusion, andesitic eruption, and granodiorite intrusions induced hydrothermal activities between 12.5 and 8.4 Ma, resulting in the formation of a mineral assemblage IV with some base metal mineralization. Pliocene–Pleistocene: An andesitic eruption formed Mt Muine between 3.2 and 2.9 Ma. The andesitic activity was associated with acid‐pH mineral assemblages I, II and III locally around the volcano. Latent magmatic intrusions subsequent to the andesitic eruption generated hydrothermal activities that formed mineral assemblages IV and V between 1.9 and 0 Ma in the southern and southeastern parts of Toyoha deposit at depth, overprinting the Middle to Late Miocene alteration. The hydrothermal activities also formed mineral assemblages I, II and III along the Yunosawa fault (east of the Toyoha deposit) and assemblage III in the south and southeast of the Toyoha deposit near the surface.     

Arsenic behaviour in gold-ore mill tailings,Massif Central,France: hydrogeochemical study and investigation of in situ redox signatures

Historical Au-ore exploitation at the Chéni mine in the Massif Central, France, generated 525,000 tonnes of finely ground mill tailings deposited in a heap that has spread with time into three settling basins. The tailings, which are rich in quartz (80%), mica and clay minerals (10% of illite, smectite, kaolinite and chlorite), feldspars (5%) but poor in carbonates (<1%), also contain sulphides (around 5%, mainly pyrite and arsenopyrite). Arsenic content of the tailings is around 6 g kg. This paper describes the geochemistry of drainage waters, with special attention paid to in situ values of the three major redox couples, namely Fe(II)/Fe(III), As(III)/As(V) and S(IV)/S(VI). The water samples range from acidic and oxidized (pH 2.9, E_h +700 mV) to moderate pH and weakly reducing (pH 7.6, E_h 15 mV). The waters are rich in SO₄ and Ca and have variable As (0.05–95 mg L⁻¹) and Fe concentrations (0.07–141 mg L⁻¹). Reduced As(III) species predominate over As(V) species (As(III)/As(V) up to 21), whereas oxidized forms of Fe and S are favoured (Fe(II)/Fe(III) up to 0.5, and S(IV)/S(VI) up to 1).Thermodynamic calculations were performed with the PHREEQC and EQ3NR codes based on a revised As database to evaluate saturation indices (SI) of the waters in relation to the main minerals and define which redox couples control the redox state of the system. The important role of carbonates, though only present in small amounts, explains the acid buffering generated by the oxidation of sulphides for waters in the pH 7–7.5 range. Measured E_h appears to fall between the calculated E_h of the Fe(II)/Fe(III) couple and that of the As(III)/As(V) couple, illustrating redox disequilibrium.     

Fe-Mn crusts from underwater rises of the Kashevarov Trough (Sea of Okhotsk)

Dredging on nonvolcanic underwater rises in the Kashevarov Trough area (Sea of Okhotsk) carried out during Cruise 178 of R/V “Sonne” yielded sedimentary (conglomerates), metamorphic (biotite hornfels, tectonic breccia with inclusions of biotite hornfels), and igneous (granodiorite) rocks as well as Fe-Mn crusts up to 15 cm thick. The study of the structural-textural properties and the thorough analysis of the mineral and chemical compositions of these crusts, including the REE and Y distribution, show that the ore sediments are hydrogenic in nature.