Tectonic setting required for the preservation of sedimentary mélanges in Palaeozoic and Mesozoic accretionary complexes of southwest Japan

The Palaeozoic to Mesozoic accretionary complexes of southwest Japan include various types of mélange. Most mélanges are polygenetic in origin, being sedimentary or diapiric mélanges that were overprinted by tectonic deformation during subduction. Sedimentary mélanges, without a tectonic overprint, are present in the Permian accretionary complexes of the Akiyoshi and Kurosegawa belts and in the Early Cretaceous accretionary complex of the Chichibu Belt. These mélanges are characterized by dominant basalt and limestone clasts, within a mudstone matrix. The basalt and limestone clasts within the sedimentary mélanges were derived from ancient seamounts. Subduction of a seamount results in deformation of the pre-existing accretionary wedge, and it is difficult to incorporate a seamount into an accretionary wedge; therefore, preservation of seamount fragments requires a special tectonic setting. Oceanic plateau accretion might play an important role in interrupting the processes of subduction and accretion during the formation of accretionary complexes. Especially the Mikabu oceanic plateau might have caused the cessation of accretion during the Early Cretaceous. The subduction and accretion of volcanic arcs and oceanic plateaux helps to preserve sedimentary mélanges from tectonic overprinting by preventing further subduction.     

The origin of mélanges: Cautionary tales from Indonesia

The origin of block-in-matrix mélanges has been the subject of intense speculation by structural and tectonic geologists working in accretionary complexes since their first recognition in the early twentieth century. Because of their enigmatic nature, a number of important international meetings and a large number of publications have been devoted to the problem of the origin of mélanges. As mélanges show the effects of the disruption of lithological units to form separate blocks, and also apparently show the effects shearing in the scaly fabric of the matrix, a tectonic origin has often been preferred. Then it was suggested that the disruption to form the blocks in mélanges could also occur in a sedimentary environment due to the collapse of submarine fault scarps to form olistostromes, upon which deformation could be superimposed tectonically. Subsequently it has proposed that some mélanges have originated by overpressured clays rising buoyantly towards the surface, incorporating blocks of the overlying rocks in mud or shale diapirs and mud volcanoes.Two well-known examples of mélanges from the Banda and Sunda arcs are described, to which tectonic and sedimentary origins were confidently ascribed, which proved on subsequent examination to have been formed due to mud diapirism, in a dynamically active environment, as the result of tectonism only indirectly. Evidence from the Australian continental Shelf to the south of Sumba shows that large quantities of diapiric mélange were generated before the diapirs were incorporated in the accretionary complex. Comparable diapirs can be recognised in Timor accreted at an earlier stage. Evidence from both Timor and Nias shows that diapiric mélange can be generated well after the initial accretion process was completed.The problem is: Why, when diapirism is so abundantly found in present convergent margins, is it so rarely reported from older orogenic belts? Many occurrences of mélanges throughout the world to which tectonic and/or sedimentary and origins have been ascribed, may in future investigations prove to have had a diapiric origin.It is emphasised that although the examples of diapiric mélange described here may contain ophiolitic blocks, they were developed in shelf or continental margin environments, and do not contain blocks of high grade metamorphic rocks in a serpentinous matrix; such mélanges originate diapirically during subduction in a mantle environment, as previous authors have suggested.     

Franciscan mélanges: coherent blocks in a low-density,ductile matrix

ABSTRACT

The Franciscan Complex comprises the largely sedimentary basement of the California Coast Ranges. This classic trench deposit has undergone a series of superimposed tectonic events since the end of Jurassic time, involving accretion, high-pressure (HP) recrystallization, buoyancy and wedge-driven exhumation, and transcurrent slip. Processes reflect plate convergence, transpressive-orthogonal subduction, and transpressive–transtensive offset. Besides stratigraphically intact strata, the Franciscan displays widespread mélanges of four main types: diapiric serpentinite intrusions, sedimentary olistostromes, broken formations, and tectonic block-in-matrix units. In the northern Coast Ranges, mélanges are especially prevalent in the Central Belt, but also occur in the Eastern and Coastal belts. Diapirs show upward, buoyant flow relative to wall rocks, but some also appear to have involved wedge-driven thrusting. Many serpentinite diapirs and tectonic mélanges contain exotic metamafic inclusions rimmed by actinolite–chlorite reaction rinds. Olistostromes include gravity slump blocks and conglomeratic lenses; petrologically similar to larger slide blocks, pebble layers document a surficial, sedimentary origin, as does the presence of volcanic arc clasts. Broken formations grade by degrees from intact stratal continuity to disrupted units; they only contain cognate boudins of rocks present in the ductile matrix. Some tectonic mélanges are simply intensely disaggregated broken formations, and include rock types of the stratigraphic host. Other tectonic mélanges carry exotic HP blocks of diverse lithologies, generally reflecting higher pressures than attended recrystallization of the low-density matrix. The four mélange types formed through diverse convergent plate-tectonic processes. Many were subjected to a multi-stage overprint; most are strongly deformed, obscuring original textures and structures. Broken formations are the most common disrupted units, accompanied by lesser amounts of tectonic mélanges, olistostromes, and ductile-matrix diapirs. In aggregate, these units reflect the operation of contrasting processes that attest to plate-tectonic evolution of the Franciscan Complex. Strong deformation accompanied oceanic plate underflow, but also took place during coeval HP metamorphism and surfaceward return of accretionary packets, then transitioned to long-sustained, chiefly dextral slip.     

Tectonic,diapiric and sedimentary chaotic rocks of the Rakhine coast,western Myanmar

The western margin of Myanmar is the northern extension the active Sunda (India-Eurasia) subduction zone. Coastal regions and offshore islands have remarkable exposures of chaotic rock terranes along wave-cut terraces that allow characteristics of tectonic, sedimentary and diapiric mélanges to be recognized. Tectonic shear zones (tectonic mélanges) contain fragments of Cretaceous ophiolites (chrome-spinel-bearing peridotites and radiolarian cherts) that are in contact with thrust packets of Eocene turbidite units (broken formations). The turbidites contain shale-rich beds that have been sheared during soft-sediment deformation (sedimentary broken formations) and are sandwiched between undeformed thick sandy beds. These are mass transport deposits (MTDs) that most likely formed during deposition of the initial detritus of the Himalayan orogenic zone, probably trench slope basins on the accretionary prism. The ophiolitic and turbiditic thrust slices have been exhumed and are currently being intruded by active mud volcanoes that bring fragments of units up from depth to the surface, forming diapiric mélanges. These diapiric mélange bodies contain only small fragments (<50 cm) that are randomly oriented and do not exhibit shear fabrics. Because the region lacks superimposed deformation characteristic of most orogenic belts, the origins of all three rock bodies can easily be distinguished.     

How many sutures in the southern Central Asian Orogenic Belt：Insights from East Xinjiang-West Gansu（NW China）？

How ophiolitic mèlanges can be defined as sutures is controversial with regard to accretionary orogenesis and continental growth.The Chinese Altay,East junggar,Tianshan,and Beishan belts of the southern Central Asian Orogenic Belt（CAOB） in Northwest China,offer a special natural laboratory to resolve this puzzle.In the Chinese Altay,the Erqis unit consists of ophiolitic melanges and coherent assemblages,forming a Paleozoic accretionary complex.At least two ophiolitic melanges（Armantai,and Kelameili） in East Junggar,characterized by imbricated ophiolitic melanges,Nb-enriched basalts,adakitic rocks and volcanic rocks,belong to a Devonian-Carboniferous intra-oceanic island arc with some Paleozoic ophiolites,superimposed by Permian arc volcanism.In the Tianshan,ophiolitic melanges like Kanggurtag,North Tianshan,and South Tianshan occur as part of some Paleozoic accretionary complexes related to amalgamation of arc terranes.In the Beishan there are also several ophiolitic melanges,including the Hongshishan,Xingxingxia-Shibangjing,Hongliuhe-Xichangjing,and Liuyuan ophiolitic units.Most ophiolitic melanges in the study area are characterized by ultramafic,mafic and other components,which are juxtaposed,or even emplaced as lenses and knockers in a matrix of some coherent units.The tectonic settings of various components are different,and some adjacent units in the same melange show contrasting different tectonic settings.The formation ages of these various components are in a wide spectrum,varying from Neoproterozoic to Permian.Therefore we cannot assume that these ophiolitic melanges always form in linear sutures as a result of the closure of specific oceans.Often the ophiolitic components formed either as the substrate of intra-oceanic arcs,or were accreted as lenses or knockers in subduction-accretion complexes.Using published age and paleogeographic constraints,we propose the presence of （1） a major early Paleozoic tectonic boundary that separates the Chinese Altay-East Junggar multiple subduction system     

OPS mélange: a new term for mélanges of convergent margins of the world

Ocean plate stratigraphy (OPS) is essential to understanding accretionary wedges and complexes along convergent plate margins. Mélanges within accretionary wedges and complexes are the products of fragmentation and mixing processes during and following OPS accretion. A new term, ‘OPS mélange’, is proposed here for mélanges composed mostly of blocks of OPS with an argillaceous matrix, and for a mixture of mélanges of multiple origins with either broken or coherent formations. An OPS mélange results from the fragmentation and disruption of OPS, without admixing of other components. Three major types of OPS mélange can be distinguished on the basis of their components: turbidite type, chert–turbidite type, and limestone–basalt type. These three types potentially form similar mélanges, but they are derived from different parts of the OPS, depending on the level of the decollement surface. The concept of ‘OPS mélange’ can be applied to most of the mélanges in accretionary prisms and complexes worldwide. In addition, this proposal recognizes a distinction between processes of fragmentation and mixing of OPS components, and mixing of ophiolite components, the latter of which results in serpentinite mélanges, not OPS mélanges. Mélanges composed of OPS sequences occur worldwide. The recognition of OPS mélanges is a key aspect of understanding tectonic processes at convergent margins, which result in mélange formation in orogenic belts globally.     

Geochemistry of the Peramora Mélange and Pulo do Lobo schist: geochemical investigation and tectonic interpretation of mafic mélange in the Pangean suture zone,Southern Iberia

The Peramora Mélange is part of an accretionary complex between the South Portuguese Zone (a fragment of Laurussia) and the Ossa Morena Zone (para-autochthonous Gondwana) and is an expression of the Pangean suture zone in southwestern Iberia. The suture zone is characterized by fault-bounded units of metasedimentary rocks, mélanges, and mafic complexes. Detailed geologic mapping of the Peramora Mélange reveals a complex pattern of imbricated schists and mafic block-in-matrix mélanges. Geochemical signatures of the Pulo do Lobo schist (PDL) are consistent with derivation from both mafic and continental sources. The mafic block-in-matrix mélange displays normal mid-ocean ridge basalt (NMORB) geochemical signature, juvenile Sm–Nd isotopic compositions, and a range of zircon ages similar to those observed in the PDL, suggesting a sedimentary component. Taken together, these data suggest a complex tectonic history characterized by erosion of a NMORB source, mélange formation, and imbrication during underplating occurring during the final stages of continent–continent collision.     

Sedimentary compared to tectonically-deformed serpentinites and tectonic serpentinite mélanges at outcrop to petrographic scales: Unambiguous and disputed examples from California

This paper compares features of unambiguous tectonic serpentinite mélanges (TSM) or serpentinite shear zones in the Coast Range ophiolite, Franciscan subduction complex, of coastal California and Sierra City Mélange of the northern Sierra Nevada of northeastern California with undisputed sedimentary serpentinite mélange (SSM) of the Great Valley Group (GVG) forearc basin deposits of coastal California, and with Franciscan serpentinite mélanges of disputed (sedimentary versus tectonic) origin. The GVG sedimentary serpentinite mélanges and disputed Franciscan serpentinite mélanges share strongly similar matrix textures and block-matrix relationships at scales from tens of meters or more to petrographic scale but differ significantly from serpentinite shear zones and TSM. This comparison suggests shared (non-diagnostic) and distinguishing features of TSM versus SSM. Internal bedding or foliation in blocks is oriented subparallel to mélange boundaries and matrix foliation for both TSM and SSM both may have strongly foliated matrix and both may feature localized shearing in matrix around block borders, especially if an SSM underwent significant post-depositional deformation. The same holds true for deformation and dismemberment of blocks, which is the block-forming and mixing mechanism in TSM but variably exhibited in SSM. In contrast only SSM have blocks or clasts whose internal foliation or bedding terminates abruptly along clast/block boundaries with a mismatch in mineralogy and/or lithology across such boundaries. Matrix foliation cuts blocks/clasts in TSM but not in SSM. SSM may show block/grain size grading but not TSM. SSM have exotic blocks and blocks may span a range of metamorphic grade, whereas TSM lack exotic blocks and blocks are isofacial.     

What is Franciscan?: revisited

The Franciscan Complex of California is better understood now than in 1972, when Berkland et al. defined it as a complex and divided it into three geographic belts. A re-evaluation is needed. Belts first served as major architectural units, but they have been abandoned by some and renamed as and subdivided into tectonostratigraphic terranes by others. The Franciscan Complex – considered to be the archetypical accretionary complex by many – is the folded, faulted, and stratally disrupted rock mass comprising the supramantle basement of the California-Southern Oregon Coast Ranges exposed east of the Salinian Block and west of and structurally below principal exposures of the Coast Range Fault, Coast Range Ophiolite, Great Valley Group, and Klamath Mountains. The Complex is dominated by sandstones and mudrocks, but contains mafic oceanic crustal fragments with chert, limestone, and other rock types, and zeolite, prehnite-pumpellyite, blueschist, and rare amphibolite and eclogite facies metamorphic rocks. Review of historical precedence, new data, available large-scale maps, and fundamental definitions suggest now (1) that the Belt terminology as applied to the entire Franciscan Complex conflicts with current knowledge of Franciscan rocks and architecture; and (2) that most named Franciscan terranes and nappes are inconsistent with basic definitions of those unit types. The major architectural units into which the Franciscan Complex can be divided are accretionary units – mélanges and underthrust sheets. Underthrust sheets can be subdivided into smaller units, e.g. broken formations and olistostromal mélanges, mappable using traditional lithostratigraphic and structural mapping techniques. Unresolved controversies in reconstruction of the nature and history of the accretionary complex relate to specific mélange origins; megathrust versus subduction channel mélange models; chert conundrums; delineation of the ages, subdivisions, and regional architecture of Franciscan units; palinspastic reconstruction of the pre-Late Cenozoic architecture; and reconstruction of the complete histories of accretionary units.     

Diagnostic features and field-criteria in recognition of tectonic,sedimentary and diapiric mélanges in orogenic belts and exhumed subduction-accretion complexes

Multiple episodes of deformation during the tectonic evolution of orogenic belts and ancient subduction-accretion complexes cause obfuscation of primary block-in-matrix fabric of mélanges, and thereby making the recognition of their tectonic, sedimentary or diapiric origin difficult. Here we present a comprehensive overview and synthesis of a diverse set of field-based stratigraphic and structural criteria, which are at the base of geological mapping rules, to differentiate between various mélange types, developed by disparate geological processes and mechanisms. We first define the current concepts of mélange and mélange nomenclature, and describe the most diagnostic features of tectonic, sedimentary and diapiric mélanges at different scales. We discuss some of the main issues complicating the application of these diagnostic criteria, such as: (i) similarities between the block-in-matrix fabric of different mélange types formed in partially lithified sediments at shallow structural levels, (ii) transformation of fabric elements with increased depth due to tectonic reworking and recrystallization processes, (iii) significance of “exotic” versus “native” blocks in mélange matrix, and (iv) age relationships between blocks and matrix in a mélange. We introduce two additional criteria in approaching these complexities and in recognizing different processes of polygenetic mélanges formation in the field when primary diagnostic fabrics were reworked by multiple deformational events. These new criteria are based on (i) the coherence between lithological compositions of mélange components (blocks and matrix) and characteristics and tectonic evolution of the geodynamic setting of their formation (“tectonic environment criterion”), and (ii) specificity and kinematic coherence in the distribution of deformation between blocks and the matrix (“deformation criterion”). The discussed diagnostic criteria can be applied to all field-based investigations of mélanges and broken formations in orogenic belts and exhumed subduction-accretion complexes around the world, regardless of their location, age, and tectonic history.     

班公湖—双湖—怒江—昌宁—孟连对接带时空结构——特提斯大洋地质及演化问题

班公湖—双湖—怒江（中北段）—昌宁—孟连对接带广泛出露特提斯大洋岩石圈俯冲消减过程中产生的不同时代、不同构造环境、不同变质程度、不同变形样式的洋板块构造地层系统、增生混杂的构造—岩石组合体,可识别出增生的远洋沉积岩、海沟浊积岩、古生代—中生代蛇绿岩、蛇绿混杂岩、洋岛-海山消减增生楔、洋底沉积增生杂岩,基底残块以及以蓝片岩、榴辉岩为代表的高压—超高压变质岩带,记录了青藏高原原古特提斯大洋形成演化的地质信息。班公湖—双湖—怒江—昌宁—孟连对接带是青藏高原中部一条重要的原古特提斯大洋自北向南后退式俯冲消亡的巨型增生杂岩带,构筑了冈瓦纳大陆与劳亚-泛华夏大陆分界带。     

Anatomy of a subduction complex: architecture of the Franciscan Complex,California, at multiple length and time scales

The Franciscan Complex of California records over 150 million years of continuous E-dipping subduction that terminated with conversion to a dextral transform plate boundary. The Franciscan comprises mélange and coherent units forming a stack of thrust nappes, with significant along-strike variability, and downward-decreasing metamorphic grade and accretion ages. The Franciscan records progressive subduction, accretion, metamorphism, and exhumation, spanning the extended period of subduction, rather than events superimposed on pre-existing stratigraphy. High-pressure (HP) metamorphic rocks lack a thermal overprint, indicating continuity of subduction from subduction initiation at ca. 165 Ma to termination at ca. 25 Ma. Accretionary periods may have alternated with episodes of subduction erosion that removed some previously accreted material, but the complex collectively reflects a net addition of material to the upper plate. Mélanges (serpentinite and siliciclastic matrix) with exotic blocks have sedimentary origins as submarine mass transport deposits, whereas mélanges formed by tectonism comprise disrupted ocean plate stratigraphy and lack exotic blocks. The former are interbedded with and grade into coherent siliciclastic units. Palaeomegathrust horizons, separating nappes accreted at different times, appear restricted to narrow zones of <100 m thickness. Exhumation of Franciscan units, both coherent and mélange, was accommodated by significant extension of the hanging wall and cross-sectional extrusion. The amount of total exhumation, as well as exhumation since subduction termination, needs to be considered when comparing Franciscan architecture to modern and ancient subduction complexes. Equal dextral separation of folded Franciscan nappes and late Cenozoic (post-subduction) units across strands of the (post-subduction) San Andreas fault system shows that the folding of nappes took place prior to subduction termination. Dextral separation of similar clastic sedimentary suites in the Franciscan and the coeval Great Valley Group forearc basin is approximately that of the San Andreas fault system, precluding major syn-subduction strike-slip displacement within the Franciscan.     

内蒙古北山地区百合山蛇绿混杂岩带的厘定及其洋盆俯冲极性——基于1∶5万清河沟幅地质图的新认识

造山带内蛇绿混杂岩带结构与组成的精细研究可为古板块构造格局重建和古洋盆演化提供最直接证据。北山造山带内存在多条蛇绿混杂岩带,记录了古亚洲洋古生代以来的俯冲和闭合过程,然而其大地构造演化长期存在争议。红石山—百合山蛇绿混杂岩带位于北山造山带北部,主要由蛇绿(混杂)岩和增生杂岩组成,具典型的"块体裹夹于基质"的混杂岩结构特征,发育紧闭褶皱、无根褶皱、透入性面理和双重逆冲构造。蛇绿混杂岩带中岩块主要由超镁铁质-镁铁质岩(变质橄榄岩、辉石橄榄岩、异剥辉石岩、蛇纹岩)、辉长岩、玄武岩、斜长花岗岩、硅质岩等洋壳残块以及奥陶纪火山岩、灰岩等外来岩块组成,基质则主要为蛇纹岩、砂板岩及少量的绿帘绿泥片岩;在蛇绿混杂岩带北侧发育有台地相灰岩与深水浊积岩组成的沉积混杂块体,具滑塌堆积特征。蛇绿混杂岩带内发育三期构造变形,前两期为中深构造层次下形成的透入性变形,第三期为浅表层次的脆性变形,未形成区域性面理。空间上,由增生杂岩和蛇绿(混杂)岩组成的百合山蛇绿混杂岩带共同仰冲于绿条山组浊积岩之上,具有与红石山地区蛇绿混杂岩带相似的岩石组成、构造变形和时空结构特征。百合山蛇绿混杂岩带南侧发育同期的明水岩浆弧,由晚石炭世石英闪长岩-花岗闪长岩-二长花岗岩以及白山组岛弧火山岩组成,其与百合山蛇绿混杂岩带共同构成了北山造山带北部石炭—二叠纪的沟-弧体系,指示了红石山—百合山洋盆向南俯冲的极性。     

New interpretation of the Franciscan mélange at San Simeon coast,California: tectonic intrusion into an accretionary prism

Many concepts and interpretations on the formation of the Franciscan mélange have been proposed on the basis of exposures at San Simeon, California. In this paper, we show the distribution of chaotic rocks, their internal structures and textures, and the interrelationship between the chaotic rocks and the surrounding sandstones (turbidites). Mélange components, particularly blueschists, oceanic rocks, including greenstone, pillow lava, bedded chert, limestone, sandstone, and conglomerate, have all been brecciated by retrograde deformation. The Cambria Slab, long interpreted as a trench slope basin, is also strongly deformed by fluidization, brecciation, isoclinal folding, and thrusting, leading us to a new interpretation that turbiditic rocks (including the Cambria Slab) represent trench deposits rather than slope basin sediments. These rocks form an accretionary prism above mélanges that were diapirically emplaced into these rocks first along sinistral-thrust faults, and then along dextral-normal faults. Riedel shear systems are observed in several orders of scale in both stages. Although the exhumation of the blueschist blocks is still controversial, the common extensional fractures and brecciation in most of the blocks in the mélanges and further mixture of various lithologies into one block with mélange muddy matrix indicate that once deeply buried blocks were exhumed from considerable depths to the accretionary prism body, before being diapirically intruded with their host mélange along thrust and normal faults, during which retrograde deformation occurred together with retrograde metamorphism. Recent similar examples of high-pressure rock exhumation have been documented along the Sofugan Tectonic Line in the Izu forearc areas, in the Mineoka belt in the Boso Peninsula, and as part of accretionary prism development in the Nankai and Sagami troughs of Japan. These modern analogues provide actively forming examples of the lithological and deformational features that characterize the Franciscan mélange processes.     

Structures and detrital zircon ages of the Devonian–Permian Tarbagatay accretionary complex in west Junggar,China: imbricated ocean plate stratigraphy and implications for amalgamation of the CAOB

ABSTRACT

The Tarbagatay Complex, located in northwest Junggar, is situated tectonically between the Zharma–Saur arc to the north and the Tacheng terrane and the Boshchekol–Chingiz arc to the south. This Complex belt is variably composed of ophiolitic mélange, sedimentary mélange, and coherent units of turbidites and shallow water sediments. These rocks crop out in fault-bound slices with fault-parallel asymmetric folds. Both the lithologies and deformation features of the Tarbagatay Complex suggest an accretionary origin generally with a top-to-the-south tectonic vergence, suggesting N-dipping subduction beneath the Zharma–Saur arc. The presence of a former ocean is indicated by the Ordovician ophiolite mélanges and related marine fossils. The time duration of the Tarbagatay Complex can be bracketed by detrital zircon ages of turbidites and shallow water sediments with a lower limit of major peak ages of 350–370 Ma, and an upper limit of middle Permian indicated by detrital zircon ages of 262.3 Ma. Based on these data, we suggest that the subduction of the Tarbagatay Ocean likely started in the Late Devonian and lasted until the middle Permian. Taking into account the formation of the northern part of the Kazakhstan orocline, which has a similar temporal-spatial framework, we propose a tectonic model for the western CAOB that involves accretion and amalgamation from the Ordovician to the middle Permian.     

西秦岭太白地区岩湾－鹦鸽咀蛇绿混杂岩的 地质特征及形成时代

岩湾-鹦鸽咀蛇绿混杂岩是秦岭商丹蛇绿混杂岩带的重要组成部分,由变质基性火山岩(玄武岩)、蛇纹岩、变辉长岩、硅质岩、变复理石(云母石英片岩)等构造岩块组成.其中变基性火山岩具有N-MORB的地球化学特征,安山岩具有与俯冲作用密切相关的岛弧火山岩的性质.玄武岩的锆石SHRIMP U-Pb年龄为483 Ma±13Ma,与天水关子镇和丹风蛇绿混杂岩的时代相一致.对岩湾-鹦鸽咀蛇绿混杂岩的岩石组成和形成时代进行研究,可为进一步探讨商丹蛇绿混杂岩带和秦岭造山带的增生造山作用提供重要证据.     

中亚造山带东段西拉木伦构造带的性质与演化：来自变形和低温热年代学的约束

中亚造山带东段何时与何地关闭,从俯冲到关闭的过程以及随后的陆内演化又经历了什么主要事件,目前还存在不同认识。中亚造山带东段林西地区的蛇绿混杂岩及其周围地区的区域地质调查表明,以杏树洼蛇绿混杂岩和双井片岩为代表的西拉木伦河构造带是一个晚古生代的增生楔,在该混杂岩带中发育了典型的岩块被包裹在基质中的构造。该楔体被中、晚二叠世克德河砾岩所覆盖。增生楔中最早的近东西向构造代表了向南俯冲阶段的变形,随后继续经历向北的逆冲推覆,卷入了中、晚二叠世地层,形成了碰撞期的变形;在晚二叠世末期—三叠纪早期,蛇绿混杂岩以及上覆的克德河砾岩又经历了区域性的强烈的右行韧性剪切,并发生应变分解。晚二叠世区域性的右行韧性剪切在中亚造山带南缘普遍发育,代表了中亚造山带已经全部进入陆内环境。双井片岩也经历了与蛇绿混杂岩类似的变形事件,在增生楔下部经历变质作用,并在碰撞期抬升至地表,晚期为区域性的右行剪切。同时,结合锆石与磷灰石低温热年代学测试表明,双井片岩和蛇绿混杂岩共同经历了中、晚侏罗世源自北侧蒙古-阿霍茨克大洋关闭导致的近南北向挤压、早白垩世期间遍及东亚的区域性伸展以及晚白垩世短暂的构造反转事件。     

From oblique accretion to transpression in the evolution of the Altaid collage: New insights from West Junggar,northwestern China

Along active margins, tectonic features that develop in response to plate convergence are strongly controlled by subduction zone geometry. In West Junggar, a segment of the giant Palaeozoic collage of Central Asia, the West Karamay Unit represents a Carboniferous accretionary complex composed of fore-arc sedimentary rocks and ophiolitic mélanges. The occurrence of quasi-synchronous upright folds and folds with vertical axes suggests that transpression plays a significant role in the tectonic evolution of the West Junggar. Latest Carboniferous (ca. 300 Ma) alkaline plutons postdate this early phase of folding, which was synchronous with accretion of the Carboniferous complex. The Permian Dalabute sinistral fault overprints Carboniferous ductile shearing and split the West Karamay Unit ca. 100 km apart. Oblique convergence may have been provoked by the buckling of the Kazakh orocline and relative rotations between its segments. Depending upon the shape of the convergence zone, either upright folds and fold with vertical axes, or alternatively, strike–slip brittle faults developed in response to strain partitioning. Sinistral brittle faulting may account for the lateral imbrication of units in the West Junggar accretionary complex.     

Growth of accretionary wedges and pulsed ophiolitic mélange formation by successive subduction of trench‐parallel volcanic elevations

Fault‐bounded coherent belts alternating with belts of mélanges are common in accretionary wedges and are usually interpreted as a result of imbrication along subduction zone megathrusts. Using the Neoproterozoic/early Cambrian Blovice accretionary complex (BAC), Bohemian Massif, as a case example, we present a new model for the origin of alternating belts through the repetition of several cycles of (1) offscraping and deformation of trench‐fill sediments to form the coherent units, interrupted by (2) arrival and subduction of linear, trench‐parallel volcanic elevations. The latter process leads to an increase in the wedge taper, triggering mass‐wasting and formation of olistostromes. At the same time, ophiolitic mélanges form by disruption of an upper part of the volcanic ridge and incorporation of the disrupted ocean‐floor succession into the olistostromes. Specifically, the BAC represents a complete section across an accretionary wedge and records three such major pulses of ophiolitic mélange formation through subduction of an outboard back‐arc basin.