Hydrothermal alteration and associated mineralization in the Freda-Rebecca gold deposit – Bindura District, Zimbabwe

The Freda-Rebecca Mine is currently the largest gold producer in Zimbabwe. The ore deposit is hosted by two main shear systems crosscutting the Rebecca diorite and Bindura granodiorite (2.65 Ga) as well as Shamvaian metasediments, which are affected by contact metamorphism. Following the intrusion of the Bindura granodiorite, intensive hydrothermal alteration developed preferentially in the dioritic part of the igneous complex (Rebecca diorite). The hydrothermal alteration started with an extensive K-dominated hydrothermal metasomatism in the whole Rebecca diorite. It was followed by less penetrative hydrothermal alteration developed preferentially near shear zones and veinlets. Hydrothermal metasomatism caused microcline and biotite formation, prevailing in the Rebecca diorite. Two main stages of post-metasomatic hydrothermal alteration and mineralization were distinguished, based on spatial relationships between different minerals and some geochemical aspects. In the first stage, an actinolite-tourmaline-arsenopyrite mineralization formed, which is characterized by Ni-Co arsenopyrite associated with actinolite, tourmaline and quartz. The second, lower temperature stage gave a polyphase gold-rich mineralization that developed in four phases which are distinguished by different parageneses including: Phase 1. Actinolite, chlorite, clinozoisite/epidote, quartz, calcite, arsenopyrite, pyrite, pyrrhotite, chalcopyrite. Phase 2. Chlorite, epidote, calcite, gold, native Bi, Bi-Pb sulfides, galena, chalcopyrite, fahlore, pyrite, Fe-gersdorffite. Phase 3. Epidote, calcite, (Ni, Co, Fe) As S phases, Co-Fe-gersdorffite. Phase 4. Chlorite, calcite, quartz. The gold mineralization is exclusively associated with phase 2 and developed in three sulfide parageneses: – Gold + Bi-Pb sulfides + bismuth + chalcopyrite + galena, associated with chlorite (Au 1). – Gold + galena + pyrite, associated with calcite and chlorite (Au 2). – Gold + pyrite + Fe-gersdorffite, associated with epidote, chlorite and calcite (Au 3). The hydrothermal alteration and mineralization formed after the consolidation of the Rebecca diorite and Bindura granodiorite, most probably in the postmagmatic cooling stage. The mineralization was emplaced either synchronously or subsequently to the shear zones which crosscut the consolidated pluton. Not all shear zones are mineralized and different shear zones show different amounts of mineralization and hydrothermal alteration. Thus, it is suggested that during the cooling stage of the pluton and subsequent to the formation of the K-metasomatic zone (microcline + biotite), hydrothermal fluids preferentially followed just forming or pre-existing shear zones. It cannot be excluded that this process developed in a plutonic porphyry copper-like environment, in which the classically hydrothermal zonation did not form due to synchronous tectonic disturbance, which preferentially drives the hydrothermal flow along shear zones. Mineral parageneses and data from chlorite geothermometry indicate that the different stages and phases of hydrothermal alteration reflect cooling stages of the hydrothermal system, from >300 °C in the first stage to about 150 °C in the last phases. Received: 4 January 1999 / Accepted: 13 August 1999     

Landscape–biogeochemical factors of transformation of the Cs-137 contamination field in the Bryansk region

Data are presented on the distribution of Chernobyl-derived ^137Cs in different landscapes of the Bryansk region. The role of different landscape-biogeochemical factors in the transformation of the ^137Cs contamination field is examined. The distribution of ^137Cs in the typical soil catenary junction of predpolessie, predopolje, and opolje landscapes is analyzed. The role of biogeochemical barriers in the ^137Cs accumulation is considered. It is revealed that the slope exposure affects the intensity of geochemical migration. In particular, the intensity of lateral migration of ^137Cs on the slopes of the southern and southwestern exposure is much higher than that on the slopes of the northern and northeastern exposure. The different types of geochemical lateral structure of landscape are analyzed on the basis of the catenary ^137Cs distribution.     

Helium and argon isotopic compositions of the Longquanzhan gold deposit in the Yishu fault zone and their geological implications

The Longquanzhan gold deposit hosted in granitic cataclasites with mylontization of the foot wall of the main Yishui-Tangtou fault. 3He/4He ratios in fluid inclusions range from 0. 14 to 0. 24 R/Ra,close to those of the crust-source helium. 40Ar/36Ar ratios were measured to be 289-1811, slightly higher than those of atmospheric argon. The results of analysis of helium and argon isotopes suggested that ore-forming fluids were derived chiefly from the crust. The δ18O values of fluid inclusions from vein quartz range from -1.78‰ to 4.07‰, and the δD values of the fluid inclusions vary between -74‰ and -77‰. The hydrogen and oxygen isotope data indicated that the ore-forming fluid for the Longquanzhan gold deposit had mixed with meteoric water in the process of mineralization. This is consistent with the conclusion from the helium and argon isotope data.     

A comparison of Jiaojia- and Linglong-type gold deposit ore-forming fluids: Do they differ?

The Jiaodong peninsula contains the most important concentration of gold deposits in China, which can be divided into Jiaojia-type and Linglong-type deposits based on mineralization style. The former is characterized by disseminated- and stockwork-style mineralization hosted in first-order regional faults, with relatively larger tonnages and lower gold grades. The latter is characterized by massive auriferous quartz veins commonly hosted in subsidiary second- or third-order faults, with smaller tonnage but higher grade orebodies. Despite these differences, both groups of deposits have the same alteration assemblages, mineral paragenesis, element concentrations, and ore-forming ages.The mainly Jiaojia-type Luoshan gold deposit and the mainly Linglong-type Fushan gold deposit are characterized by H-O-S-Pb isotope data that indicate the ore-forming fluids have a dominantly metamorphic source. The fluids were derived during the Yanshanian orogenic event, and were most likely associated with dehydration and decarbonization processes near the top of the subducting paleo-Pacific plate. The Linglong-type ores have relatively lighter calculated δ¹⁸O compositions (−3.9 to −2.3‰) than the Jiaojia-type ores (0.3–8.0‰), possibly because of a greater degree of mixing with meteoric water. Petrographic, cathodoluminescence, microthermometric, and laser Raman spectroscopic analyses of fluid-inclusion assemblages in quartz from the two types of ores indicate fluids were similar, in both cases characterized by medium–high homogenization temperatures (211–393 °C), significant CO₂ (∼15% mol), minor CH₄ (⩽18% in the carbonic phase), and low salinity (⩽11.2 wt% NaCl eq.). The Linglong-type ores, however, have a wider range of CO₂ and CH₄ concentration and salinity than the Jiaojia-type ores. Fluid immiscibility, occurred in main ore stage of both ore types, with the trapping conditions of 77–185 MPa and 284–328 °C, although the unmixing is more intense and widespread in the Linglong-type ores. Both fluid-wallrock interaction and fluid immiscibility are important gold-deposition processes in the two types, but immiscibility is more important in the Linglong-type ores and that has led to the typical higher gold grade.In general, there is little geochemical differences between the ore-forming fluids for Jiaojia- and Linglong-type gold deposits. Both Jiaojia- and Linglong-type ores can exist in a single deposit and form in the same metallogenic event. The Linglong-type ores developed as more massive veins, because of their location in zones of more extensive extension and they lack significant post-ore cataclastic deformation.     

Geological setting and timing of the Chah Zard breccia-hosted epithermal gold–silver deposit in the Tethyan belt of Iran

The breccia-hosted epithermal gold–silver deposit of Chah Zard is located within a high-K, calc-alkaline andesitic to rhyolitic volcanic complex in the central part of the Urumieh-Dokhtar Magmatic Arc (UDMA), west central Iran. The total measured resource for Chah Zard is ∼2.5 million tonnes of ore at 12.7 g/t Ag and 1.7 g/t Au (28.6 t Ag, 3.8 t Au), making it one of the largest epithermal gold deposits in Iran. Magmatic and hydrothermal activity was associated with local extensional tectonics in a strike-slip regime formed in transtensional structures of the Dehshir-Baft strike-slip fault system. The host rocks of the volcanic complex consist of Eocene sedimentary and volcanic rocks covered by Miocene sedimentary rocks. LA-ICP–MS U–Pb zircon geochronology yields a mean age of 6.2 ± 0.2 Ma for magmatic activity at Chah Zard. This age represents the maximum age of mineralization and may indicate a previously unrecognized mineralization event in the UDMA. Breccias and veins formed during and after the waning stages of explosive brecciation events due to shallow emplacement of rhyolite porphyry. Detailed systematic mapping leads to the recognition of three distinct breccia bodies: volcaniclastic breccia with a dominantly clastic matrix; gray polymict breccia with a greater proportion of hydrothermal cement; and mixed monomict to polymict breccia with clay matrix. The polymictic breccias generated bulk-mineable ore, whereas the volcaniclastic breccia is relatively impermeable and largely barren. Precious metals occur with sulfide and sulfosalt minerals as disseminations, as well as in the veins and breccia cements. There is a progression from pyrite-dominated (stage 1) to pyrite-base metal sulfide and sulfosalt-dominated (stages 2 and 3) to base metal sulfide-dominated (stage 4) breccias and veins. Hydrothermal alteration and deposition of gangue minerals progressed from illite-quartz to quartz-adularia, carbonate, and finally gypsum-dominated assemblages. Free gold occurs in stages 2 and 4, principally intergrown with pyrite, quartz, chalcopyrite, galena, sphalerite, and Ag-rich tennantite–tetrahedrite, and also as inclusions in pyrite. High Rb/Sr ratios in ore-grade zones are closely related to sericite and adularia alteration. Positive correlations of Au and Ag with Cu, As, Pb, Zn, Sb, and Cd in epithermal veins and breccias suggest that all these elements are related to the same mineralization event.     

New data for geology and geochemistry of the Rodion gold–quartz deposit,northeastern Russia

This paper is focused on the new data for geology, mineralogy, and geochemistry of stockworks consisting of steep and gentle quartz veins and veinlets forming a complex multilevel structure at the Rodion deposit. These stockworks range from 25 to 150 m in thickness. Average gold grade is 1.8 g/t. Ore minerals pyrite, arsenopyrite, chalcopyrite, sphalerite, galena, and native gold are predominantly concentrated on the vein and veinlet walls. Thermal metamorphism caused by the intrusion of the Ulakhan granodiorite pluton is the important singularity of the deposit. The deposit ore is enriched in chalcophile microelements Au, Ag, As, Sb, Cu, Pb, Zn, and Bi as compared to the average composition of the upper crust and hosting Permian sequences. The enrichment factors range from a few to hundreds of times. Bi, W, Pb, Ag, and Na₂O are positively correlated between each other and with Au. The highest correlation coefficient 0.59 is between Au and Bi. Au is negatively correlated with Ba, Li, Co, Ni, Mn, Ti, and Be. The stockwork ores were formed involving homogeneous low-saline (9.4–4.3 wt % NaCl equiv) substantially aqueous bicarbonate-chloride fluid at 275–330°C and 300–1840 bar fluid pressure. Fluid has a high concentration of CO₂ (up to 349 g/kg of water) and is reductive (СО₂/СН₄ = 17–37.3). Na and Ca are the major cations in the fluid, whereas K and Mg are minor. In addition, many microelements were detected in the fluid: As, Li, Rb, Cs, Mo, Ag, Sb, Cu, Zn, Cd, Pb, U, Ga, Ge, Ti, Mn, Fe, Co, Ni, V, Cr, Y, Zr, Sn, Ba, W, Au, Hg, and REE. The results obtained are consistent with the metamorphic–magmatic formation model of orogenic gold–quartz deposits within the Yana–Kolyma belt.     

Geology,geochemistry and sulphur isotopes of the Hat Han gold–antimony deposit,NE Vietnam

The Song Hien Rift basin is considered as one of the important regions for gold deposits in North East Vietnam. Host rocks of a number gold deposits in the Song Hien Rift basin are mainly in Lower Triassic sedimentary formations. However, there is the Hat Han gold deposit hosted in fined-grained mafic magmatic rocks with similar characteristics as gold deposit hosted in the Triassic sediments. Sulphur isotopic compositions of sulphide are similar to those in carbonaceous shale, suggesting that the sulphur was ‘borrowed’ from sedimentary rocks in filling the rift basin. Gold-bearing sulphides (pyrite and arsenopyrite) are the main form of Au presence in the ore. Gold in pyrite is present as Au^+ 1, and a minor amount of as nanoparticles of native Au (Au⁰); whereas in arsenopyrite, gold is chemically bound as the octahedral complex AuAs₂. Analysis of geology, as well as geochemical and isotopic studies show that the genesis of the Hat Han gold deposit is not related to the Cao Bang mafic magmatism; instead the latter only serves as (ore) host rock. The geochemical results presented above suggest that the gabbro host rock only supplies iron needed for sulphide formation. With regard to ore genesis, the Hat Han gold deposit in the Song Hien rift basin was generated in the similar way as sediment-hosted gold deposit. There are many similar typomorphic features between the Hat Han deposit and Carlin-like deposits in the Nanpanjang sedimentary basin in China.     

Kysylga gold–silver deposit in the terrigenous sequences of the Verkhoyansk–Kolyma mesozoides

The paper reports the mineralogical and geochemical features of the Kysylga gold deposit located in the hornfelsed Norian sedimentary rocks and classified with low-sulfide gold–quartz type of deposits typical of the Verkhoyansk–Kolyma metallogenic province. Detailed typomorphic study of the major minerals (quartz, arsenopyrite, and gold) of the ore veins shows that the deposit is assigned to the gold–silver type. Mineralogical and geochemical data substantiate this conclusion.     

Alteration and mineral zonation at the Mt Lyell copper–gold deposit,Tasmania

The Mount Lyell copper deposits are located in the middle Cambrian Mount Read volcanic belt of western Tasmania and consist of more than 24 separate copper–gold–silver orebodies. The dominant copper mineralisation style is disseminated pyrite–chalcopyrite subvertical pipes with subordinate chalcopyrite–bornite ± other copper phases, massive pyrite and base metal sulfides. A zonation in mineralisation style within the pipes is defined from chalcopyrite–magnetite at depth to chalcopyrite–pyrite at intermediate levels, to chalcopyrite–bornite at the shallowest level. Alteration is developed broadly symmetrically around the ore zones and zoned from quartz–chlorite–phengite ± biotite at depth to quartz–muscovite at intermediate levels, and a quartz–muscovite–pyrophyllite–zunyite assemblage at the shallowest levels. This is interpreted to be a result of a fluid that evolved from hot, reduced and neutral conditions at depth to cool, oxidised and acidic conditions at the shallowest level. The chalcopyrite–bornite deposits occur at the top of the hydrothermal system and are associated with intensely silicified rock and muscovite/pyrophyllite alteration. The close relationship of these deposits with the top of the pipes suggests they are part of a single mineralising event. Where the chalcopyrite–bornite deposits are juxtaposed with the Owen Group, rather than a simple chalcopyrite–bornite mineralogy, there are numerous other copper phases, which represent higher oxidation states and collectively suggest variable and fluctuating fluid conditions during deposition. It is proposed that these deposits are formed by an interaction of the reduced hydrothermal fluid with an oxidised fluid generated at very shallow levels within and during deposition of the Owen Group. Mineralisation within the middle Owen Group sandstones and clasts of altered rock within the middle and upper Owen Group sediments marks the end of the hydrothermal system. Around the entire edge of the Mt Lyell field, there is a variation in the white mica composition from proximal muscovite to distal phengite that represents the neutralisation of the hydrothermal fluid by fluid–wall rock interaction.     

Forecasting of technogenic placer dynamics in the shore zone of the sea on the basis of numerical modeling: The case of the Val’kumei deposit

As natural placer and primary ore deposits are exhausted, the role of technogenic deposits is increasingly growing. In some cases, technogenic components accumulate in the shore zone of the shelf. The proposed numerical dynamic model is based on data concerning the technogenic tin deposit formed as a product of 50 years of operations at the Val’kumei Mining and Concentrating Combine, which disposed of tin ore flotation tailings in the coastal zone of the Chaun Gulf of the East Siberian Sea. The developed model describes adequately the current placer dynamics and forecasts a change in the morphology and geochemical parameters of a technogenic fan, opening the way to modeling behavior of natural geochemical anomalies in the coastal zone under conditions of active lithodynamics.     

Geology and genesis of the giant Beiya porphyry–skarn gold deposit,northwestern Yangtze Block,China

The Beiya ore deposit is located in the northwestern Yangtze Block, to the southeast of the Tibetan Plateau, SW China. The deposit is hosted by a porphyritic monzogranitic stock that is cross-cut by a porphyritic granite and later lamprophyre dikes. The whole-rock geochemistry of the porphyritic monzogranite and granite intrusions is both potassic and adakite-like, as evidenced by high K₂O/Na₂O (2.2 to 24.8), Sr/Y (53.2 to 143.2), and (La/Yb)_N (4.9 to 28.9) ratios. Both intrusions have comparable zircon U–Pb ages of ca. 36 Ma and εHf(t) values of − 6.8 to + 2.7. Zircons within these intrusions have Hf isotope crustal model ages with a prominent peak at ca. 840 Ma, and both of the intrusions have similar Sr–Nd–Pb isotopic compositions that are comparable to the compositions of amphibolite xenoliths hosted by potassic felsic intrusions in western Yunnan. The contemporaneous lamprophyre dikes show Nb–Ta depletion, enriched (⁸⁷Sr/⁸⁶Sr)_i and εNd(t), and extremely low Nb/U ratios (1.6–3.6), suggesting that these dikes were formed from magmas generated by partial melting of a metasomatized subcontinental lithospheric mantle (SCLM). The geochemistry of the porphyritic intrusions and the lamprophyre dikes suggests that the Beiya porphyries formed as a result of partial melting of a thickened and K-rich region of the lower crust, triggered by melting of metasomatized SCLM. The ca. 840 Ma U–Pb ages and εHf(t) values (− 6.8 to + 2.7) of xenocrystic zircons within the porphyritic intrusions suggest that these zircons were produced in a continental arc setting at ca. 840 Ma. The peak Hf model age of the zircons crystallized from the intrusions and the U–Pb ages of the xenocrystic zircons within the intrusions suggest that these porphyritic intrusions formed from magmas sourced from a juvenile crust that formed at ca. 840 Ma. This juvenile crust is most likely the source for the metals within the porphyry–skarn deposits in the study area, as the SCLM-derived lamprophyre dikes in this area are barren.Massive Fe–Au orebodies (~ 99 million metric tons at an average grade of 2.61 g/t Au) within the study area are generally located within the skarn-altered boundary of the porphyritic monzogranite stock and along the faults in the surrounding Triassic carbonates. The Fe–Au orebodies are spatially and genetically associated with skarn comprising garnet and diopside. Petrographic observations show that the massive Fe–Au orebodies mainly consist of hematite and magnetite with disseminated pyrite that hosts native gold and electrum.The porphyritic granite contains porphyry-style mineralization in the form of disseminated and veinlet-hosted pyrite and chalcopyrite. Pyrite-hosted lattice-bound gold is present within both the massive Fe–Au and the porphyry-type mineralization in the study area, and is present at concentrations up to 10 ppm Au (as determined by in situ LA-ICP-MS analysis). Subsequent weathering altered the primary magnetite–hematite–sulfide assemblage in the Fe–Au orebody into a magnetite–limonite assemblage, and generated laterite-type mineralization in which gold is hosted by limonite.     

Geological characteristics, tectonic setting and preliminary interpretations of the Jilau gold–quartz vein deposit, Tajikistan

The southern Tien Shan metallogenic province of Central Asia hosts a number of important gold resources including the Jilau gold–quartz vein system in western Tajikistan. These deposits were formed at the late stages of continent–continent collision in association with subduction-related magmatism, metamorphism and continental margin deformation attributed to the Central Asian Hercynian Orogeny. Jilau is hosted by a Hercynian syntectonic granitoid intrusive that was emplaced into bituminous dolomite country rocks. Economic mineralisation is associated with a dilational jog within a high-angle, oblique dextral-reverse slip shear zone that was undergoing brittle–ductile deformation. The orebody takes the form of shear-zone subparallel quartz veins and lenses that emanate from a steeply plunging ore shoot of veins and stringers within a silicified and sulphidised granodiorite core. It is thought to have formed by a dynamic process in which fluid flow was governed by a fault-valve mechanism. Numerous cycles of fluid pressure build-up, fault failure, jog dilation, fluid flow, phase separation of low salinity H₂O–CO₂–CH₄(–N₂) fluids, and sealing took place. Gold appears together with scheelite and bismuth minerals predominantly as inclusions in arsenopyrite in quartz veins and altered wall-rock, and is mainly associated with quartz containing fluid inclusions enriched in CH₄. The correlation between high gold grades and high CH₄ concentrations suggests that components of the mineralising fluids were derived from, or passed through, the reducing, carbonaceous rocks in the contact aureole of the intrusive. The occurrence of Au and W in an adjacent Hercynian skarn deposit and in the Jilau orebody, infers that the ore metals in both these systems were ultimately derived from a magmatic source. Received: 15 April 1999 / Accepted: 30 December 1999     

Volty?ov gold deposit: Case history from the Bohemian Massif, Czechoslovakia

The Voltýov gold deposit in Central Bohemia is situated in the contact zone of granitic rocks of Variscan age and the Upper Proterozoic and Lower Paleozoic metasediments of the Krásná Hora Metamorphic Islet — the relict of an original sedimentary cover. Goldbearing quartz mineralization of vein and stockwork types is developed in rocks of both geological units, its form depending upon lithology. While ore shoots in metasediments and orthogneiss form generally regular bodies several tens of meters thick, those developed in granodiorite are rather irregular, without any indication of the tectonic control of the mineralization. The mineralized zone peters out extremely rapidly downwards, with a marked decrease both in extent and in gold contents. The gold-bearing mineralization is formed by two generations of gold, both of high fineness (over 900) and very fine-grained (5–20 m). The gold is accompanied by accessory arsenopyrite, maldonite and other Bi-Te minerals, scheelite, and exceptionally chalcopyrite, pyrite, and sulphosalts. Gold contents are 2–3 g/t on average. In addition, late quartz-carbonate mineralization, with U and Se minerals and remobilized gold, is also present. Detailed soil prospecting (25 × 50 m grid) of the deposit detected a large and constrasting gold halo with gold contents exceeding 2 ppm (–200 mesh fraction), accompanied by higher concentrations of characteristic pathfinders — above all As and Bi. The halo extent exceeds the area of the ore outcrop by several times. The origin of gold mineralization in the deposit is explained by remobilization of gold from orthogneiss by the intrusion of the Central Bohemian Pluton.     

Geochronology and thermochronology of gold mineralization in the Turmalina deposit,NE of the Quadrilátero Ferrífero Region,Brazil

The Turmalina gold deposit comprises three epigenetic domains whose development is related to the propagation/reactivation events of the NW–SE Pitangui Shear Zone (PSZ). The lodes are hosted in a Late Archaean sedimentary sequence on top of a strongly deformed (mafic-dominated) metavolcanic pile metamorphosed under 3.5–4 kbar and 540–610 °C; the association forms the upper part of a lithostratigraphic succession (Pitangui Group) that overlies an older TTG gneissic basement. According to field evidence and petrographic observations, the ore-forming process is polyphasic, starting at the time when the PSZ crossed the metamorphic quartz + staurolite + biotite + almadine + hornblende isograde; the main evolving stages, however, mostly took place throughout the metamorphic retrogression path. Fluid inclusion microthermometry also shows that metamorphogenic aqueous–carbonic solutions (initially with ≈ 16–20 eq. wt.% NaCl and circulating at approximately 4 kbar and 550 °C) were subjected to repeated boiling and mixing with cooler aqueous solutions at approximately 1–2 kb and 300–350 °C. These boiling events, which were triggered by depressurization, were contemporaneous with gold (and later sulfide) deposition, preceding a late stage of hydrothermal activity under lower PT conditions (< 1 kbar and ≈ 130–230 °C). To constrain both the mineralization age and the source/pathways of the ore-forming fluids in the Turmalina deposit, a multi-system isotope (Pb–Pb, Rb–Sr and Sm–Nd) study was carried out using various whole-rock and mineral samples. The main results are as follows: (i) the onset of the ore-forming process took place at ca. 2.2–2.1 Ga; (ii) the critical timing for gold formation was confined to ca. 2–1.9 Ga; and (iii) the late hydrothermal influxes occurred after 1.75 Ga. Therefore, the ore-forming process can be envisaged as a result of successive physical–chemical processes that took place during two major, long-lasting (≈ 250 Ma) periods under initial cooling rates of approximately 1 °C/Ma and, after ca. 2–1.9 Ga, approximately 2.5 °C/Ma. Moreover, the rejuvenation episodes at ca. 2–1.9 Ga and ca. 1.75 Ga probably indicate reactivation events in the PSZ, which triggered new fluid inflows into the system and revitalized the ore-forming process. That was the case for fluids that circulated deeply through both the older basement rocks and the mafic volcanic pile, allowing either metal enrichment from multistage leaching processes of various reservoirs or possible U/Th decoupling during ore remobilization. The Turmalina ore-system lifetime is consequently confined to the Rhyacian period (Paleoproterozoic), which is compatible with the age constraints presented by other studies regarding the fold-thrust belt's development (ca. 2.125 Ga) and orogenic collapse (ca. 2.095 Ga).     

Geology and isotope geochemistry (C–O–S) of the Diyadin gold deposit,Eastern Turkey: A newly-discovered Carlin-like deposit

Diyadin mineralization is the first reported gold deposit located in a collisional tectonic environment in Eastern Anatolia. The mineralization is related to N–S and N10–20°W-trending fault systems and hosted within the Paleozoic metamorphic basement rocks of the Anatolide–Toride microcontinent. Calc-schist, dolomitic marble and Miocene and Quaternary volcanic rocks comprise the exposed units in the mineralized area. Geochemical signatures, alteration types and host rock characteristics of the Diyadin gold deposit resemble those of Carlin-type deposits. Mineralization is constrained by alteration of overlying volcanic rocks to younger than ~ 14 Ma (K–Ar).Carbon and oxygen stable isotope measurements of carbonate rocks were made on six drill holes (n = 81) with an additional four samples of fresh carbonate rocks from surface outcrops. Background carbonate rocks have δ¹³C_V-PDB ~ 1.8‰ and δ¹⁸O_V-SMOW ~ 27‰. Isotopically-altered host rock samples have decreased δ¹⁸O (down to ~+11.4‰) and variable δ¹³C (from − 3.6 to + 4.8‰). Postore carbonate veins and cave-fill material have distinctly different isotopic signatures, particularly carbon (from δ¹³C = + 8.4 to + 9.8‰). Whether this post-ore carbonate is simply very late in mineralization associated with the gold system, or is a completely different, younger system utilizing the same pathways, is unclear at present. Within the host rock sample set, there is no correlation between gold and δ¹³C, and a weak correlation between gold and δ¹⁸O, indicative of water–rock interaction and isotopic alteration. Both the isotopic data and structural mapping suggest that the main upflow zone for the deposit is near the northern portion of the drill fence. Additional data at multiple scales are required to clarify the relationship(s) between fluid flow and mineralization.     

Fluid immiscibility and gold deposition in the Birimian quartz veins of the Angovia deposit (Yaouré, Ivory Coast)

The Paleoproterozoic terranes (Birimian) of West Africa are well known to host numerous economic gold mineralizations. The Angovia gold mineralization is located in a brecciated and mylonitic zone within the Birimian greenstones. The sulfide–gold mineralization is mainly represented by gold associated with pyrite and chalcopyrite. A fluid inclusion study undertaken on mineralized quartz veins revealed the presence of aqueous-carbonic (CO₂–H₂O) fluids, the association of carbonic (CO₂) and early aqueous fluids, followed by later aqueous (H₂O-salt) and finally nitrogen-rich fluids. Entrapment of the initial homogeneous aqueous-carbonic fluids prior to fluid immiscibility depicts the evolution of the P–T conditions during the exhumation of the terranes after the peak of green-schist metamorphism. The CO₂ rich-fluid occurs especially in gold-bearing quartz, and are considered as the main evidence of the ore-forming process in the gold-bearing quartz veins. It is considered as a product of immiscibility of the CO₂–H₂O parent. The volatile fraction of carbonic and aqueous-carbonic fluid inclusions is dominated by CO₂, containing minor amounts of N₂, even smaller amounts of CH₄ and sporadically, H₂S. The aqueous-carbonic fluids have moderate salinity (3–10 wt.% eq. NaCl). Late aqueous and N₂ – (CH₄–CO₂) fluids are considered as later, unrelated to the main ore stage, and were trapped during the cooling of the hydrothermal system from 300 to 200 °C.The immiscibility has been favored by a strong pressure drop, the main trapping P–T conditions being 320–370 °C and 105–135 MPa. The mineralizing process is likely related to the immiscibility event, which was probably favored by the release of the fluid pressure after fracturing along the main shear zones. The ore process is likely to have occurred along the main shear zones or related secondary structures affected by cycling of the fluid pressure and quartz sealing–fracturing processes. The superimposed process can also explain the relative complexity of the quartz textures and fluid inclusion microfractures, and the rather wide range in the density of both parent fluid and CO₂-dominated fluid.     

Geochemistry,petrogenesis and tectonic setting of the peraluminous granites in the nacheng gold deposit,Yongning, Guangdong北大核心

The Nacheng granite locates in the Yong ning area, Guangdong Province. This paper studied petrographical and chronological characteristics of this granite as well as its petrogenesis and geological significance. The Nacheng granite mainly consists of quartz (40%-50%), orthoclase (25%-30%), palgioxlase (15%-20%) with minor accessory minerals of quartz apatite and magnetite. Geochemical analyses show that the manziying granite has high content of SiO2 (75. 56%) , K2O (4.72%), Al2O3 (13. 34%) and total alkali (Na2O+K2O=7. 49%), but relatively low MgO (0. 04%-1. 29%) and CaO (0. 39%-2. 21%). The ratios of K2O/Na 2O are generally higher than 1. The Rittmann indexes are between 1-2. 43, belonging to the high-K calc-alkaline series. The values of A/CNK vary from 1. 12 to 1. 32 with an average of 1. 10, showing the characteristics of peraluminous S type granites. Trace element analyses show that the Nacheng granite has relatively high REE content of 82. 6 × 10-6 225. 68 × 10-1, and displays right-inclined V-shape REE patterns with relatively high fractionations of LREE and HREE[(La/Yb)N = 1. 51-9. 66] and pronounced negative Eu anomalies (δEu = 0. 31-0. 74) in the chondrite-normalized REE diagrams, suggesting a typical crust-derived grandite. The magmas may be divided into two types: "low-temperature" type from mudstones and "high-temperature" type from sandstones. The Nacheng granites were formed from the post-orogenic tectonic setting.     

Stable isotope geochemistry and Re–Os ages of the Yinan gold deposit,Shandong Province,northeastern China

The Yinan gold deposit in the Luxi area of Shandong Province in northeastern China is a skarn-type ore deposit. In this article, we present results from sulphur, lead, carbon–oxygen, and helium–argon isotope chemistry to characterize the ore genesis and source features. We also present rhenium–osmium ages from molybdenite to evaluate the timing of ore formation. The δ³⁴S values of pyrite from the ore deposit range from 0.7‰ to 5.60‰ with a mean at 2.70‰, close to mantle and meteorite sulphur. Among Pb isotopes, ²⁰⁶Pb/²⁰⁴Pb values range from 18.375 to 18.436, ²⁰⁷Pb/²⁰⁴Pb values from 15.694 to 15.8, and ²⁰⁸Pb/²⁰⁴Pb values from 38.747 to 39.067. The δ¹³C values of calcite associated with the ores range from ?0.2‰ to ?0.5‰ and their δ¹⁸O values show variation from 9.4‰ to 12.6‰, suggesting a mixed fluid source. The ³He/⁴He and ⁴⁰Ar/³⁶Ar ratios of fluids trapped in pyrite are in the range of 0.27–1.11 Ra and 439.4–826, respectively, with calculated proportion of the mantle-derived He ranging from 3.25% to 14.03% and atmosphere argon ranging from 35.8% to 67.3%. The data suggest that the ore-forming fluids were derived from the crust and were mixed with a distinct contribution of mantle helium. The Re and Os values vary from 32 × 10^?6 to 93.02 × 10^?6 and from 0.01 × 10^?9 to 0.34 × 10^?9, respectively. The model ages of molybdenite range from 126.96 ± 1.82 Ma to 129.49 ± 2.04 Ma, with a weighted mean age of 128.08 ± 0.75 Ma and isochron age of 130.3 ± 3 Ma. These ages are close to the age of the associated quartz diorite porphyrite pluton, suggesting a close relationship between Cretaceous magmatism and metallogeny in NE China. A comparison of the Yinan gold deposit in the Luxi area with those of the Jiaodong area shows that the contrast in metallogenic features between the two are linked with the tectonic and geodynamic history.     

Processes of high-T fluid–rock interaction during gold mineralization in carbonate-bearing metasediments: the Navachab gold deposit,Namibia

The Navachab gold deposit in the Damara belt of central Namibia is hosted by a near-vertical sequence of amphibolite facies shelf-type metasediments, including marble, calc-silicate rock, and biotite schist. Petrologic and geochemical data were collected in the ore, alteration halos, and the wall rock to evaluate transport of elements and interaction between the wall rock and the mineralizing fluid. The semi-massive sulfide lenses and quartz–sulfide veins are characterized by a complex polymetallic ore assemblage, comprising pyrrhotite, chalcopyrite, sphalerite, and arsenopyrite, native bismuth, gold, bismuthinite, and bismuth tellurides. Mass balance calculations indicate the addition of up to several orders of magnitude of Au, Bi, As, Ag, and Cu. The mineralized zones also record up to eightfold higher Mn and Fe concentrations. The semi-massive sulfide lenses are situated in the banded calc-silicate rock. Petrologic and textural data indicate that they represent hydraulic breccias that contain up to 50 vol.% ore minerals, and that are dominated by a high-temperature (T) alteration assemblage of garnet–clinopyroxene–K-feldspar–quartz. The quartz–sulfide veins crosscut all lithological units. Their thickness and mineralogy is strongly controlled by the composition and rheological behavior of the wall rocks. In the biotite schist and calc-silicate rock, they are up to several decimeters thick and quartz-rich, whereas in the marble, the same veins are only a few millimeters thick and dominated by sulfides. The associated alteration halos comprise (1) an actinolite–quartz alteration in the biotite schist, (2) a garnet–clinopyroxene–K-feldspar–quartz alteration in the marble and calc-silicate rock, and (3) a garnet–biotite alteration that is recorded in all rock types except the marble. The hydrothermal overprint was associated with large-scale carbonate dissolution and a dramatic increase in CO₂ in the ore fluid. Decarbonation of wall rocks, as well as a low REE content of the ore fluid resulted in the mobilization of the REE, and the decoupling of the LREE from the HREE. The alteration halos not only parallel the mineralized zones, but may also follow up single layers away from the mineralization. Alteration is far more pronounced facing upward, indicating that the rocks were steep when veining occurred. The petrologic and geochemical data indicate that the actinolite–quartz– and garnet–clinopyroxene–K-feldspar–quartz alterations formed in equilibrium with a fluid (super-) saturated in Si, and were mainly controlled by the composition of the wall rocks. In contrast, the garnet–biotite alteration formed by interaction with a fluid undersaturated in Si, and was mainly controlled by the fluid composition. This points to major differences in fluid–rock ratios and changes in fluid composition during alteration. The alteration systematics and geometry of the hydrothermal vein system are consistent with cyclic fluctuations in fluid pressure during fault valve action. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.