高阶单步力控制拟动力试验方法研究

本文采用高阶单步力控制试验方法,提出了减少试验误差的若干处理技术,进行了三层底部框支配筋砌块短肢砌体剪力墙足尺结构的拟动力试验,实现了大刚度多自由度复杂结构拟动力试验。试验结果表明,足尺拟动力试验可以很好地反映结构在真实地震作用下的反应,而采用力控制试验方法在结构恢复力特性进入下降段之前是可行的。     

Seismic analysis of nailed vertical excavation using pseudo-dynamic approach

An attempt has been made to study the behavior of nailed vertical excavations in medium dense to dense cohesionless soil under seismic conditions using a pseudo-dynamic approach. The effect of several parameters such as angle of internal friction of soil(Φ), horizontal(k_h) and vertical(k_v) earthquake acceleration coefficients, amplification factor(f_a), length of nails(L), angle of nail inclination(α) and vertical spacing of nails(S_v) on the stability of nailed vertical excavations has been explored. The limit equilibrium method along with a planar failure surface is used to derive the formulation involved with the pseudo-dynamic approach, considering axial pullout of the installed nails. A comparison of the pseudo-static and pseudo-dynamic approaches has been established in order to explore the effectiveness of the pseudo-dynamic approach over pseudo-static analysis, since most of the seismic stability studies on nailed vertical excavations are based on the latter. The results are expressed in terms of the global factor of safety(FOS). Seismic stability, i.e., the FOS of nailed vertical excavations is found to decrease with increase in the horizontal and vertical earthquake forces. The present values of FOS are compared with those available in the literature.     

基于拟动力法的抗滑桩加固边坡地震稳定性分析

地震力作用下土质边坡动态稳定性研究对实际边坡工程有着重要的意义。采用拟动力法结合简化毕肖普法研究坡顶抗滑桩加固土质边坡在地震力作用下的动态稳定性。尽管拟静力法是目前处理地震力最为广泛的方法之一,但其局限性在于无法考虑地震力随时间变化且忽略了地震波在土体中的传播。而拟动力法采用正弦波模拟地震波在土中传播,并考虑地震波从坡脚传递到坡顶的相位差以及阻尼力对边坡稳定性的影响,通过边坡安全系数的变化揭示土质边坡在地震力作用下的稳定性变化规律。将得到的结果与拟静力法进行对比,突出了拟动力法的优势。最后,考虑水平地震加速度系数、加速度幅值放大系数以及土体内摩擦角对边坡稳定性的影响,以期对实际工程提供理论借鉴。     

Pseudo-dynamic testing using conventional testing devices

This paper presents the development of a new type of pseudo-dynamic test system, in which a conventional static jack is utilized for loading. Two of the new hardware devices developed for the system are detailed: a hydraulic pump system that can adjust the rate of oil flow using an inverter motor, and a controller that controls the jack's motion with a displacement feedback signal transmitted from a digital displacement transducer. The unique advantages of the system are summarized as: larger force capacity achieved by the static jack, maximum use of hardware devices available in many existing structural testing laboratories, and flexibility for program development accomplished by separating tasks into multiple PCs. The reliability of the system is calibrated first by a pseudo-dynamic test for an SDOF system and then by a pseudo-dynamic test for a ten-storey building model having hysteretic dampers. For the latter test, substructuring techniques have been incorporated. The accuracy of the results obtained is discussed based upon the capacity of the system to control displacement and comparison with numerical results.     

Response of infilled frames using pseudo-dynamic experimentation

An accurate and practical testing technique to study seismic performance of multi-storey infilled frames is formulated. This technique is based on the pseudo-dynamic method which can provide an acceptable approximation of the dynamic performance of structures under the influence of earthquake excitation. The pseudo-dynamic experimental technique is outlined and applied for testing a two-bay, two-storey gravity load designed steel frame infilled with unreinforced concrete block masonry walls. From the discussion of the results, the dynamic performance of the tested structure is assessed. © 1998 John Wiley & Sons, Ltd.     

极低屈服点软钢阻尼器恢复力模型的研究

本文通过试验和理论分析探讨极低屈服点软钢阻尼器的恢复力特性。随着塑性变形的发展将恢复力模型中的骨架曲线进行平移,其卸载曲线用Ramberg—Osgood函数来描述,由此得到的恢复力模型定义为骨架平移模型,将其应用于描述极低屈服点软钢阻尼器的恢复力特性、为了验证该馍型的有效性并确定合理的参数,对安装极低屈服点软钢阻尼器的3层钢框架结构进行了拟动力试验．同时用该骨架平移模型模拟极低屈服点软钢阻尼器的恢复力特性进行了大量的弹塑性地震反应分析,通过取用不同平移系数时的数值计算结果与拟动力试验结果的比较,发现平移系数为0．6左右时,该模型具有较高的精度。     

Adaptive time stepping in pseudo-dynamic testing of earthquake driven structures

The problem of assessing errors in implementing time-marching algorithms in the context of pseudo-dynamic seismic testing of structures is considered. These errors occur in implementing the numerical and experimental steps of the test procedure. The study investigates how a linearized variational equation can be augmented with the governing equation of motion to track the effect of the errors, and, accordingly, adjust the step size of integration adaptively to keep a global error norm within specified limits. The governing augmented equations are integrated using an explicit operator splitting scheme. Additional efforts, in terms of evaluation of the tangent stiffness matrix, are shown to become necessary while modelling the errors. Illustrative examples include numerical studies on a set of nonlinear systems and an experimental study on a geometrically nonlinear two-storied building frame. The experimental results from pseudo-dynamic test are shown to compare reasonably well with pertinent results from an effective force test.     

钢筋混凝土带开孔梁框架抗震性能试验研究

本文通过两榀单层单跨带开孔梁框架的拟动力试验,对试件的破坏形态、动力反应、滞回曲线、耗能能力、刚度退化等抗震性能进行研究,最后对钢筋混凝土带开孔梁框架结构的抗震性能作出了评论。     

Seismic active pressure distribution history behind rigid retaining walls

Evaluating the seismic active earth pressure on retaining walls is currently based on pseudo-static method in practices. In this method, however, it is not simple, choosing an appropriate value for earthquake coefficient, which should fully reflect the dynamic characteristics of both soil and loading is an important problem. On the other hand, by using only two extra dynamic parameters that are shear wave velocity of soil and predominant frequency of probable earthquake, one can benefit from another more accurate tool called pseudo-dynamic method to solve the problem of earth pressure.In this study in the framework of limit equilibrium analysis, pseudo-dynamic method has been applied into horizontal slice method of analysis to account for the effect of earthquake on lateral earth pressure history behind rigid retaining walls. The pressure history resulted from a number of analyses shows that before and after reaching the peak resultant force, different pressure distributions occur behind a wall that put more local pressure than the same at peak. This method would be a tool to control this phenomenon in wall design.     

等效力控制方法在拟动力试验中的应用

为了避免用复杂的迭代求解拟动力试验隐式逐步积分方法的非线性运动方程,作者提出了一种用反馈控制求解的方法—等效力控制方法。这篇文章首先介绍等效力控制方法的原理;然后通过数值模拟和试验验证此方法的有效性。数值模拟和试验的结果都表明,当选用合理的等效力控制器参数时,此方法可以取得非常好的稳定性和精度。数值模拟的结果还表明尽管等效力控制方法是以力作为反馈控制的对象,此方法能有效完成对具有负刚度试件的加载。     

Hybrid experiments on non-linear earthquake-induced soil-structure interaction

Non-linear seismic soil-structure interaction is studied through a hybrid procedure using the pseudo-dynamic testing (PDT) method which is modified to take into account frequency dependence and developed for foundation-soil systems. The numerical scheme used in conventional PDT is improved by introduction of a time-dependent pseudo-forcing function which is derived from frequency-dependent dynamic characteristics of the system by means of Hilbert transformation in the frequency domain. Surface, shallow and caisson foundation models that differed in size and depth of embedment were used. The mechanical characteristics of the systems were determined from static and forced vibration dynamic tests. An amplitude scaling technique was used for three recorded accelerograms.     

SMA-橡胶支座的力学性能试验研究

SMA-橡胶支座是一种由叠层橡胶垫和形状记忆合金（SMA）复合而成的新型隔震支座。阐明了SMA-橡胶支座的设计思路和工作机理,通过SMA-橡胶支座实物模型的伪动力试验,考察了支座的水平和竖向刚度、耗能能力和等效阻尼比,研究了位移幅值、加载频率、竖向荷载等参数对支座力学性能的影响。研究结果表明,SMA-橡胶支座工作性能稳定,耗能能力较强,是一种性能优良的新型隔震装置。     

钢筋混凝土框架结构在小震作用下失效相关性的拟动力模型试验研究

通过两榀二层三跨规范钢筋混凝土对称、非对称框架结构模型的拟动力试验,对试件在小震作用截面约束的失效相关性进行了分析,并与文献中的Monte-Carlo随机模拟结果进行了比较,进一步验证了规范钢筋混凝土框架结构在小震作用下失效独立的相关性结论。     

带缝空心RC剪力墙结构变形与耗能性能研究

为了研究带缝空心钢筋混凝土剪力墙结构的抗震性能,本文进行了六层1／3．0比例模型房屋的拟动力及拟静力试验,分析了带缝空心钢筋混凝土剪力墙结构在地震作用下的变形与耗能性能,探讨了结构在地震作用下的破坏机理、滞回特性及其薄弱环节或部位。试验结果表明：该结构模型延性的弯剪破坏形态与普通钢筋混凝土剪力墙结构不同;竖缝的设置增加了结构在弹塑性阶段的变形及耗能能力,结构具有较强的变形及耗能能力。作为一种抗震性能良好的新型的结构形式,带缝空心钢筋混凝土剪力墙结构具有一定的工程推广应用前景。     

钢筋混凝土平面框架结构拟动力有限元分析

采用ABAQUS软件建立2层1榀1跨钢筋混凝土平面框架结构的三维实体精细有限元模型进行拟动力分析,模型考虑混凝土的塑性损伤和钢材的弹塑性混合强化性质、结构阻尼和连续地震引起的塑性损伤累积效应.在位移、恢复力的计算结果与已有拟动力试验结果符合较好的基础上,进一步分析该平面框架的结构损伤、塑性耗能分配机制以及混凝土、钢筋的...     

子结构地震模拟振动台混合试验原理与实现

为了解决地震模拟振动台承载能力及台面尺寸对大型结构试验的限制,扩展振动台的功能,本文提出了子结构地震模拟振动台混合试验方法、试验过程及实时数值积分方法,并给出了试验子结构边界条件的两种模拟形式.通过一个简单框架结构的地震模拟振动台试验和子结构混合加载试验验证了该方法的可行性,并指出了该试验方法的主要技术问题.混合试验方法通过子结构技术和振动台试验相结合,解决了目前的地震模拟振动台试验和拟动力试验在设备规模和加载速度上的局限性.     

一种新型SMA阻尼器的试验研究

在对NiTi形状记忆合金（SMA）的力学性能试验研究的基础上,设计了一种新型SMA阻尼器,根据形状记忆合金丝的超弹性分段线性恢复力模型建立了阻尼器的理论模型,并通过阻尼器的性能试验研究验证了理论模型的正确性,试验结果表明这种阻尼器具有较好的耗能能力。     

高强钢筋高强混凝土框架结构滞回耗能分析

本文研究配有高强钢筋的高强混凝土框架结构的耗能性能与抗震能力.对2层2榀1/2比例的模型结构进行了拟动力试验,分析了高强钢筋的高强混凝土框架结构在地震作用下的滞回反应和耗能能力,探讨了结构在地震作用下的破坏机理,滞回特性及薄弱环节或部位.结构的延性系数达到4.0以上,等效阻尼系数达到0.055以上.试验结果表明,此类结...     

大型火力发电厂钢筋混凝土横向框排架主厂房动力特性试验研究

对1／7大型火力发电厂三跨三榀钢筋混凝土横向框排架子空间模型，分别用激振法和柔度矩阵法进行模型结构动力特性试验，研究该结构的前三阶周期和振型，同时根据拟动力试验中结构的位移反应，求得在不同破损阶段模型结构的动力特性，最后根据相似关系得出原型结构的动力特性。