后张力无粘结预应力高层建筑抗震可靠性研究

本文以天津市房地产开发（集团）河西友谊小区综合楼为研究对象,研究其在地震作用下高层建筑的可靠性,探索高层建筑结构系统的抗震可靠性分析方法,本文还对比一般框架梁柱结构与后张无粘结预应力板柱结构抗震可靠性的差异,研究层数变化时可靠性所受的影响,得到满意的结果。     

Seismic fragility assessment of RC frame structure designed according to modern Chinese code for seismic design of buildings

Following several damaging earthquakes in China,research has been devoted to find the causes of the collapse of reinforced concrete(RC) building sand studying the vulnerability of existing buildings.The Chinese Code for Seismic Design of Buildings(CCSDB) has evolved over time,however,there is still reported earthquake induced damage of newly designed RC buildings.Thus,to investigate modern Chinese seismic design code,three low-,mid-and high-rise RC frames were designed according to the 2010 CCSDB and the corresponding vulnerability curves were derived by computing a probabilistic seismic demand model(PSDM).The PSDM was computed by carrying out nonlinear time history analysis using thirty ground motions obtained from the Pacific Earthquake Engineering Research Center.Finally,the PSDM was used to generate fragility curves for immediate occupancy,significant damage,and collapse prevention damage levels.Results of the vulnerability assessment indicate that the seismic demands on the three different frames designed according to the 2010 CCSDB meet the seismic requirements and are almost in the same safety level.     

桥梁抗震设计规范与建筑抗震设计规范的分析与比较

对我国现行《公路工程抗震设计规范》(JTJ004-89)与《建筑抗震设计规范》(GB50011-2001)进行了较为详细的对比。分别从抗震设计的基本思想、设计地震动参数、地震反应分析和计算方法、构造细节等方面对这两本规范进行了比较,并指出了今后我国各行业工程结构抗震设计规范宜逐步统一。     

On the development of a seismic source zonation model for seismic hazard assessment in western Saudi Arabia

A new seismic source model has been developed for the western part of the Arabian Peninsula, which has experienced considerable earthquake activity in the historical past and in recent times. The data used for the model include an up-to-date seismic catalog, results of recent studies of Cenozoic faulting in the area, aeromagnetic anomaly and gravity maps, geological maps, and miscellaneous information on volcanic activity. The model includes 18 zones ranging along the Red Sea and the Arabian Peninsula from the Gulf of Aqaba and the Dead Sea in the north to the Gulf of Aden in the south. The seismic source model developed in this study may be considered as one of the basic branches in a logic tree approach for seismic hazard assessment in Saudi Arabia and adjacent territories.     

Cursory seismic drift assessment for buildings in moderate seismicity regions

This paper outlines a methodology to assess the seismic drift of reinforced concrete buildings with limited structural and geotechnical information. Based on the latest and the most advanced research on predicting potential near-field and far field earthquakes affecting Hong Kong, the engineering response spectra for both rock and soil sites are derived. A new step-by-step procedure for displacement-based seismic hazard assessment of building structures is proposed to determine the maximum inter-storey drift demand for reinforced concrete buildings. The primary information required for this assessment is only the depth of the soft soil above bedrock and the height of the building. This procedure is further extended to assess the maximum chord rotation angle demand for the coupling beam of coupled shear wall or frame wall structures, which may be very critical when subjected to earthquake forces. An example is provided to illustrate calibration of the assessment procedure by using actual engineering structural models.     

Seismic hazard assessment of Western Coastal Province of Saudi Arabia:deterministic approach

Seismic hazard assessment is carried out by utilizing deterministic approach to evaluate the maximum expected earthquake ground motions along the Western Coastal Province of Saudi Arabia. The analysis is accomplished by incorporating seismotectonic source model,determination of earthquake magnitude(Mmax), set of appropriate ground motion predictive equations(GMPE), and logic tree sequence. The logic tree sequence is built up to assign weight to ground motion scaling relationships. Contour maps of ground acceleration are generated at different spectral periods. These maps show that the largest ground motion values are emerged in northern and southern regions of the western coastal province in Saudi Arabia in comparison with the central region.     

Seismic vulnerability evaluation of RC moment frame buildings in moderate seismic zones

A multi‐level seismic vulnerability assessment of reinforced concrete moment frame buildings located in moderate seismic zones (0.25g) is performed on a set of ductile versions of low‐ to mid‐rise two‐dimensional moment frames. The study is illustrated through application to comparative trial designs of two (4‐ and 8‐story) buildings adopting both space‐ and perimeter‐framed approaches. All frames are dimensioned as per the emerging version of the seismic design code in Egypt. These new seismic provisions are in line with current European norms for seismic design of buildings. Code‐compliant designs (CCD), as well as a proposed modified code design relaxing design drift demands for the investigated buildings, are examined to test their effectiveness and reliability. Applying nonlinear inelastic incremental dynamic analyses, fragility curves (FC) for the frames are developed corresponding to various code‐specified performance levels. Code preset lower and upper bounds on design acceleration and drift, respectively, are also addressed along with their implications, if imposed, on the frames seismic performance and vulnerability. Annual spectral acceleration hazard curves for the case study frames are also generated. Estimates for mean annual frequency (MAF) of exceeding various performance levels are then computed through an integration process of the data resulting from the FC with the site hazard curves. The study demonstrates that the proposed design procedure relaxing design drift demands delivers more economic building designs relative to CCDs, yet without risking the global safety of the structure. The relaxed design technique suggested herein, even though scoring higher, as expected by intuition, MAF of exceeding various code‐limiting performance levels expressed in terms of interstory drift ratios, still guarantees a reasonably acceptable actual margin against violating code limits for such levels. Copyright © 2010 John Wiley & Sons, Ltd.     

强震作用下机场高耸塔台结构抗震性能分析

为提升强震作用下机场高耸塔台结构的抗震性能及安全,采用非线性时程分析方法研究高耸塔台结构的强震损伤分布规律;基于性能化抗震设计方法确定塔台关键构件抗震性能水准,对高耸塔台结构进行性能化抗震设计和损伤控制;最后分析了竖向地震对高耸塔台结构强震损伤的影响.分析得到,采用多遇地震设计的塔台结构,在罕遇地震作用下塔台结构层间位...     

某高层建筑结构动力测试与抗震性能分析

通过测试高层建筑结构在自然环境激励下的动态响应信号,进行动力参数识别,可以验证理论计算结果的准确性,为建筑结构安全评估及损伤识别提供依据,为结构抗震计算和设计提供重要指标。针对某办公楼首先采用脉动法进行动力测试,获得了其固有频率和振型。最后,运用有限元方法对该结构进行模态分析和抗震计算,结果表明:实测动力特性结果与计算结果符合较好,结构抗震承载力满足要求,利用该检测方法可以较好的把握结构的整体性能。     

Seismic behavior and zoning of the sabkha soils in Jubail industrial city,Saudi Arabia

This study aimed at the micro-level seismic behavior and zoning of the saline sabkha strata in Jubail industrial area in Eastern Saudi Arabia. It encompasses the evaluation of the site-specific seismic response parameters and the liquefaction potential for various possible subsurface conditions under the probable seismic event(s). The approach to achieve the objectives of this study included the following: analysis of geologic, hydrologic, and geotechnical data of the area; performance of field and laboratory dynamic testing; and dynamic modeling and analysis of the subsurface profiles. The results of the simulation have been used to develop liquefaction potential maps and site-specific spectra of the study area, consisting of ten seismic zones under a range of probable peak horizontal ground acceleration (PHA). Results do not show significant probability of liquefaction of the loose soil layers in the study area at the maximum possible design PHA of 0.035 g; however, liquefaction is anticipated at higher PHA values. Site-specific spectral response resulted in values of S _s and S ₁ spectral accelerations to be different as compared to those suggested by local standards. The resulting seismic micro-zonation maps and the corresponding parameters are very useful for the stability analysis of the existing and planned structures in the Jubail area.     

Azimuthal anisotropy analysis of walkaround vertical seismic profiling vertical seismic profiling: a case study from Saudi Arabia

Understanding fracture orientations is important for optimal field development of fractured reservoirs because fractures can act as conduits for fluid flow. This is especially true for unconventional reservoirs (e.g., tight gas sands and shale gas). Using walkaround Vertical Seismic Profiling (VSP) technology presents a unique opportunity to identify seismic azimuthal anisotropy for use in mapping potential fracture zones and their orientation around a borehole. Saudi Aramco recently completed the acquisition, processing and analysis of a walkaround VSP survey through an unconventional tight gas sand reservoir to help characterize fractures. In this paper, we present the results of the seismic azimuthal anisotropy analysis using seismic traveltime, shear‐wave splitting and amplitude attenuation. The azimuthal anisotropy results are compared to the fracture orientations derived from dipole sonic and image logs. The image log interpretation suggests that an orthorhombic fracture system is present. VSP data show that the P‐wave traveltime anisotropy direction is NE to SW. This is consistent with the cemented fractures from the image log interpretation. The seismic amplitude attenuation anisotropy direction is NW to SE. This is consistent with one of the two orientations obtained using transverse to radial amplitude ratio analysis, with the dipole sonic and with open fracture directions interpreted from image log data.     

Comparing state-of the art near-surface models of a seismic test line from Saudi Arabia

We present a seismic Test Line, provided by Saudi Aramco for various research teams, to highlight a few major challenges in land data processing due to near‐surface anomalies. We discuss state‐of‐the‐art methods used to compensate for shallow distortions, including single‐layer, multilayer, plus/minus, refraction and tomostatics methods. They are a starting point for the new technologies presented in other papers, all dealing with the same challenging data described here. The difficulties on the Test Line are mostly due to the assumption of vertical raypaths, inherent in classical applications of near‐surface correction statics. Even the most detailed velocity/depth model presents difficulties, due to the compleX‐raypath. There is a need for methods which are based on more complex models andtheories.     

按新旧规范设计的多层住宅砖房地震易损性的对比

本文采用概率方法借助于拉丁超立方采样技术和非线性地震反应时程分析对按现行规范设计的多层住宅砖房的地震易损性进行分析,并与按上一代规范设计的多层住宅砖房的地震易损性分析结果[1]进行了比较,为进一步研究这类结构的地震安全性、未来地震的损失预测以及防震减灾对策奠定基础。     

评估结构抗震性能的能量方法

在抗震概念设计中，虽然确立了一些准则，但这些准则基本上是定性的，目前尚缺乏简明的定量评估准则。本文结合抗震设计规范提出了一种对结构抗震性能评估的能量方法，可用于抗震设计方案的定量评估和比较，以及场地对结构影响的定量评估，减震方案的评估。该方法在实际工程设计中的应用取得预期效果。     

CRS strategies for solving severe static and imaging issues in seismic data from Saudi Arabia

Static shifts from near‐surface inhomogeneities very often represent the key problem in the processing of seismic data from arid regions. In this case study, the deep bottom fill of a wadi strongly degrades the image quality of a 2D seismic data set. The resulting static and dynamic problems are solved by both conventional and common‐reflection‐surface (CRS) processing. A straightforward approach derives conventional refraction statics from picked first breaks and then goes through several iterations of manual velocity picking and residual statics calculation. The surface‐induced static and dynamic inhomogeneities, however, are not completely solved by these conventional methods. In CRS processing, the local adaptation of the CRS stacking parameters results in very detailed dynamic corrections. They resolve the local inhomogeneities that were not detected by manual picking of stacking velocities and largely compensate for the surface‐induced deterioration in the stack. The subsequent CRS residual statics calculations benefit greatly from the large CRS stacking fold which increases the numbers of estimates for single static shifts. This improves the surface‐consistent averaging of static shifts and the convergence of the static solution which removes the remaining static shifts in the 2D seismic data. The large CRS stacking fold also increases the signal‐to‐noise ratio in the final CRS stack.     

基于性态的建筑工程抗震设计——《建筑工程抗震性态设计通则》述评

《建筑工程抗震性态设计通则(试用)》对抗震设计具有重要的指导意义,其中的抗震设计理念同以往的抗震设计规范在抗震设防的思路、概念和方法上有较大的区别。从工程实践的角度,比较了《通则》和现行抗震设计相关规范的区别并对具体应用提出一些看法。     

超限高层建筑工程数据库及Bayes知识发现

针对上海市超限高层建筑工程实例,收集整理了相关设计信息,构建了能够表征这些设计信息的数据表并形成了数据库。鉴于传统的管理信息系统不能够空间表示,提出了一种新型的基于Arc-GIS的信息系统,同时引入了贝叶斯网络,以数据库样本为基础进行结构选型。实践证明,该系统充分利用了计算机的存贮、计算、统计、共享以及空间显示功能,贝叶斯网络为超限高层建筑结构体型优选提供了一种新的方法,对超限高层建筑工程的设计改进和规范的完善都具有一定的实际意义。     

利用等位移原则估计高层结构的非弹性地震反应(二)

通过高层结构弹性和非弹性地震时程反应分析,研究了两者的位移反应关系。结果表明：结构在不同地震作用下非弹性总位移角反应的平均值与弹性反应十分接近,基本符合等位移原则,可以用后者分析结果直接估计前者;结构最大层间位移角反应的平均值在弱和中等非线性阶段亦与弹性反应十分接近,在强非线性阶段则大于弹性反应,经数据拟合,初步提供了一个在此阶段由弹性最大层间位移角反应估计非弹性反应的近似公式。     

A simplified methd of evaluating the seismic performance of buildings

This paper presents a simplified method of evaluating the seismic performance of buildings. The proposed method is based on the transformation of a multiple degree of freedom (MDOF) system to an equivalent single degree of freedom (SDOF) system using a simple and intuitive process. The proposed method is intended for evaluating the seismic performance of the buildings at the intermediate stages in design, while a rigorous method would be applied to the final design. The performance of the method is evaluated using a series of buildings which are assumed to be located in Victoria in western Canada, and designed based on the upcoming version of the National Building Code of Canada which is due to be published in 2005. To resist lateral loads, some of these buildings contain reinforced concrete moment resisting frames,while others contain reinforced concrete shear walls. Each building model has been subjected to a set of site-specific seismic spectrum compatible ground motion records, and the response has been determined using the proposed method and the general method for MDOF systems. The results from the study indicate that the proposed method can serve as a useful tool for evaluation of seismic performance of buildings, and carrying out performance based design.