Structural and geochronological relationships of metamorphic soles of eastern Mediterrranean ophiolites to surrounding units: indicators of intra‐oceanic subduction and emplacement

This paper is a synthesis of structural and geochronological data from eastern Mediterranean ophiolitic metamorphic rocks and surrounding units to interpret the intra‐oceanic subduction and ophiolite emplacement mechanism.

Metamorphic rocks occur as discontinuous tectonic slices at the base of the ophiolites, generally between the peridotite tectonites and volcanic‐sedimentary units, and locally in fault zones in the overlying peridotites. They consist essentially of amphibolite, and in lesser quantities, micaschist, quartzite, epidotite and marble.

Geological and geochronological data indicate that recrystallization of the metamorphic rocks occurred in the oceanic environment. The contact between the metamorphic rocks and the hanging‐wall is parallel to the foliation of the metamorphic rocks, and is interpreted as the fossil plane of intra‐oceanic subduction. Structural relationships suggest that intra‐oceanic subduction was situated between two lithospheric blocks separated by an oceanic fracture zone. Therefore the Neotethyan ophiolites with metamorphic soles represent the remnants of the overriding oceanic lithosphere's training slices of the metamorphic rocks at the base.

In the Anatolian region, radiometric dating of metamorphic rocks from the Taurus and Izmir‐Ankara‐Erzincan zone ophiolites yield nearly identical ages. Besides, palaeontological and structural data indicate coeval opening and similar oceanic ridge orientation. Consequently it is highly probable that Taurus and Izmir‐Ankara‐Erzincan zone ophiolites represent fragments of the same oceanic lithosphere derived from a single spreading zone. Palaeontological data from underlying volcanic and sedimentary units point out that the opening of the Neotethyan ocean occurred during Late Permian‐Middle Triassic time in the Iranian‐Oman region, during Middle Triassic in Dinaro‐Hellenic area, and finally during Late Triassic in the Anatolian region.

Radiometric dating of the metamorphic rocks exhibit that the intra‐oceanic thrusting occurred during late Lower‐early Late Jurassic for Dinaro‐Hellenic ophiolites, late Lower‐early Late Cretaceous for Anatolian, Iranian and Oman ophiolites well before their obduction on the Gondwanian continent. Neotethyan ophiolites were obducted onto various sections of the Gondwanian continent from late Upper Jurassic to Palaeocene time, Dinaro‐Hellenic ophiolites during late Upper Jurassic‐early Lower Cretaceous onto the Adriatic promontory, Anatolian, Iranian and Oman ophiolites from late Lower Cretaceous to Palaeocene onto the Aegean, Anatolian and Arabic promontories.     

苏鲁变质带北部的岩石构造单元及结晶块体推覆构造

虽然苏鲁变质带北部的超高压变质岩石的类型及其特征与大别山超高压带相似,但是要划出与大别山相对应的岩石构造单元是困难的。详细的区域地质、岩石学、同位素年代学及地球化学的研究已将超高压带的西界大致圈定在牟平断裂至米山断裂的范围内。特别需要提出的是,在荣成超高压变质岩石分布区的南北两侧,出露有3 种不同成因的麻粒岩,即榴辉岩化的麻粒岩;由超高压变质岩经高压升温变质作用生成的麻粒岩;以及未经过榴辉岩相变质的麻粒岩。它们有规律地成带分布。这些麻粒岩带以及在荣成地区出露的未经过麻粒岩相叠加变质的超高压变质带,各自都有着完全不同的变质历史,并且都以深大韧性剪切带为其边界。由此笔者将苏鲁变质带北部由南向北划分为海阳所变质地块(榴辉岩化扬子陆块基底变质单元)、荣成变质地块(超高压变质单元)、威海变质地块(麻粒岩相叠加变质的超高压构造岩片)、昆嵛山边界杂岩带。这些来源于地壳深层的结晶块体是超高压带形成和演化的产物,在后来的进一步碰撞挤压中,这些来源于深层而就位于中上地壳水平的结晶块体,有可能发生了与薄皮构造机制(thin-skin thrust)类似的构造过程。它们有如一系列的推覆体挤压叠置,使华北和华南陆块最后挤压在一起。     

Sub-ophiolite metamorphic rocks from NW Anatolia, Turkey

The metamorphic rocks from near Kütahya in north-west Anatolia record different stages in the history of closure of the Neo-Tethyan İzmir–Ankara–Erzincan ocean. Sub-ophiolite metamorphic rocks within the Tavşanlı zone are a tectonically composite sequence of quartz–mica schists, amphibole schists, amphibolites and garnet amphibolites. They show increasing metamorphic grade towards the base of the ophiolite. A first metamorphic event, typical of sub-ophiolite metamorphic sole rocks, was characterized by high-grade assemblages, and followed by retrograde metamorphism. A second event was marked by a medium-to high-pressure overprint of the first-stage metamorphic assemblages with assemblages indicating a transition between the blueschist and greenschist facies. The chemistry of the sub-ophiolite metamorphic rocks indicates an ocean island basalt origin, and Ar–Ar dating indicates a high temperature metamorphic event at 93±2 Ma. Counter-clockwise P–T–t paths recorded by the sub-ophiolite metamorphic rocks are interpreted to result from intra-oceanic thrusting during the closure of the İzmir– Ankara–Erzincan ocean, initiating subduction, which formed the high-temperature assemblages. Further subduction then produced the widespread blueschists of the Tavşanlı zone during the Late Cretaceous. Later cold thrusting obducted the ophiolite (with the metamorphic sole welded to its base), ophiolitic melanges and blueschists onto the Anatolide passive margin in the latest Cretaceous. All these events pre-date the final Anatolide–Pontide continent–continent collision.     

Metamorphism and tectonic evolution of the Shangdan fault zone, Shaanxi, China

Abstract The Shangdan fault in the Qinling Orogenic Belt of China is an important boundary between the Caledonian North Qinling Fold Belt and the Hercynian South Qinling Fold Belt. In the Danfeng area, the fault zone strikes WNW–ESE and comprises four strongly deformed zones and three weakly deformed domains parallel to each other. The fault zone has a complex history of multiple deformation and each domain has a different tectonic style that was formed at different stages of the deformation.
The rocks exposed in the weakly deformed domains belong to the Qinling, Danfeng and Liuling Groups. In this paper, the mineral chemistry and mineral assemblages are used to infer the metamorphic conditions and the P–T paths of these units. The metamorphic units in and near the fault zone have different metamorphic conditions and histories that are correlated with the tectonic evolution of the fault zone. Caledonian–Hercynian uplift and southward thrusting of the Proterozoic Qinling Group, over the Danfeng and the Liuling Groups, produced the main metamorphic and tectonic features of the fault zone. Folding of both the Liuling Group and the thrust faults during the Hercynian–Indosinian was accompanied by northward thrusting.     

Structural analysis of basement tectonites from the Aegean metamorphic core complex of Ios, Cyclades, Greece

The island of Ios in the Cyclades, Aegean Sea, Greece, exposes high pressure metamorphic rocks that were subjected to Miocene continental extension subsequent to the Alpine collisional orogeny. The pre-Alpine history of the lower-plate of this Aegean metamorphic core complex involves intrusion of granitoids into metasediments which subsequently underwent Hercynian amphibolite facies metamorphism. During the Alpine orogeny (D₂), these rocks were overthrust by the Cyclades blueschist nappe. Later, the lower plate was tectonically exhumed during Oligo-Miocene continental extension and associated plutonism. Final exhumation occurred as a result of the operation of a south-directed, crustal-scale shear zone and low-angle normal faults. This study shows that the Ios core complex reflects an intrinsic relationship between early thrusting and later extensional tectonism. Basement rocks have been exhumed from beneath the nappes that originally overrode them.     

武夷山北缘断裂带动力学研究

华南武夷山北缘边界被绍兴－兴山－东乡断裂带所限。该断裂带到少保留了三期构造事件的形迹，第一期发生在８００Ｍａ～９００Ｍａ的晚元古代，呈ＮＷ向ＳＥ的区域推覆韧剪变形运动，以构造混杂岩和区域绿片岩相－角闪岩相变质，强烈的褶皱和韧剪变形为特征，对应于古洋盆关闭，华南复合地体与江南岛弧撞焊接过程，第二期发生在４５８Ｍａ～４２１Ｍａ的志留纪，表现为从北向南的韧剪变形运动，伴有左旋走滑韧性剪切，以糜棱岩化和进变质作用为特征．黒云母多变为硅线石。该期变形使第一期构造形迹被强烈选加置换。其动力学背景与闽东南地体朝武夷山的拼贴增生事件有关。第三期属中生代陆内变形，是一种高构造位的左旋走滑脆性剪切，以岩石的破裂和岩块的水平位移为特征．并具转换拉伸性质，导致中生代火山沉积盆地的形成。     

Neoproterozoic collisional metamorphism in overthrust terranes of the Trans-Angarian Yenisey Ridge,Siberia

Four polymetamorphic complexes in the vicinity of regional faults in the Trans-Angarian region of the Yenisey Ridge were studied to determine their metamorphic evolution and to elucidate distinctive features of the regional geodynamic processes. Based on our geological and petrological studies using geothermobarometry and P–T path calculations, we show that a Neoproterozoic medium-pressure metamorphism of the kyanite-sillimanite type at c. 850 Ma overprinted regionally metamorphosed low-pressure andalusite-bearing rocks. A positive correlation between rock ages and P–T estimates for the kyanite-sillimanite metamorphism provides evidence for regional structural and tectonic heterogeneity. The medium-pressure recrystallization was characterized by (1) localized distribution of metamorphic zones in the area directly underlying thrust faults with a measured thickness of 2.5–8 km; (2) syntectonic formation of kyanite-bearing mineral assemblages related to thrusting; (3) gradual increase in metamorphic pressure towards the thrust faults associated with a low metamorphic field gradient (from 1–7 to 12°C/km); and (4) equally steep burial P–T paths recorded for the highest grade rocks. These specific features are typical of collisional metamorphism during overthrusting of continental blocks and are evidence of near-isothermal loading in accordance with the transient emplacement of thrust sheets. The proposed model for tectono-metamorphic evolution of the study areas due to crustal thickening at high thrusting rates and subsequent rapid exhumation explains these tectonic features. Data analysis allowed us to consider the medium-pressure kyanite-bearing metapelites as a product of collisional metamorphism, reflecting unidirectional thrusting of Siberian cratonal blocks onto Yenisey Ridge along regional deep faults (Angara, Mayakon, and Chapa areas) and by opposite movements in the zone of secondary splay faults (Garevka area).     

Diagenesis and very low-grade metamorphism of volcaniclastic sandstones from contrasting geodynamic environments, North Island, New Zealand: the Murihiku and Waipapa terranes

Abstract The Mesozoic Murihiku and Waipapa terranes are two accretionary wedges of linked forearc and trench sediments, respectively, that were juxtaposed in the early Cretaceous.
Late Triassic to late Jurassic Murihiku terrane volcaniclastic sediments are folded into a regional syncline and have been diagenetically altered. There is a general relationship between zeolite occurrence, clay mineralogy, vitrinite reflectance and stratigraphic position. Youngest Jurassic sediments contain heulandite, analcime and stilbite, whereas late Triassic to mid-Jurassic sediments have laumontite and heulandite (in detail the zeolite distribution is complicated). Tuffaceous horizons on the eastern limb of the syncline are calcitized rather than zeolitized. Post-diagenetic fractures associated with uplift are laumontite-filled. The inferred geothermal gradient is c. 15° C km⁻¹.
The Waipapa terrane is an accretionary complex dominated by imbricated terrigenous sediments of Triassic and Jurassic age with enclosed Permian to Jurassic pelagic sediments and basalts. Late Jurassic sediments are massive volaniclastic sandstones. The sediments are non-foliated, and metamorphic minerals in the massive sandstones have crystallized in specific domains. The observed metamorphic succession of prehnite-pumpellyite and pumpellyite-actinolite facies assemblages was overprinted in the imbricated rocks during a thermal event that was late in the deformation sequence and broadly coincident with hydraulic fracturing and veining.
The metamorphic successions in the two terranes and their relationships to structural features are in excellent accord with accretionary complex models.     

LPHT metamorphism in a late orogenic transpressional setting, Albera Massif, NE Iberia: implications for the geodynamic evolution of the Variscan Pyrenees

During the Late Palaeozoic Variscan Orogeny, Cambro‐Ordovician and/or Neoproterozoic metasedimentary rocks of the Albera Massif (Eastern Pyrenees) were subject to low‐pressure/high‐temperature (LPHT) regional metamorphism, with the development of a sequence of prograde metamorphic zones (chlorite‐muscovite, biotite, andalusite‐cordierite, sillimanite and migmatite). LPHT metamorphism and magmatism occurred in a broadly compressional tectonic regime, which started with a phase of southward thrusting (D1) and ended with a wrench‐dominated dextral transpressional event (D2). D1 occurred under prograde metamorphic conditions. D2 started before the P–T metamorphic climax and continued during and after the metamorphic peak, and was associated with igneous activity. P–T estimates show that rocks from the biotite‐in isograd reached peak‐metamorphic conditions of 2.5 kbar, 400 °C; rocks in the low‐grade part of the andalusite‐cordierite zone reached peak metamorphic conditions of 2.8 kbar, 535 °C; rocks located at the transition between andalusite‐cordierite zone and the sillimanite zone reached peak metamorphic conditions of 3.3 kbar, 625 °C; rocks located at the beginning of the anatectic domain reached peak metamorphic conditions of 3.5 kbar, 655 °C; and rocks located at the bottom of the metamorphic series of the massif reached peak metamorphic conditions of 4.5 kbar, 730 °C. A clockwise P–T trajectory is inferred using a combination of reaction microstructures with appropriate P–T pseudosections. It is proposed that heat from asthenospheric material that rose to shallow mantle levels provided the ultimate heat source for the LPHT metamorphism and extensive lower crustal melting, generating various types of granitoid magmas. This thermal pulse occurred during an episode of transpression, and is interpreted to reflect breakoff of the underlying, downwarped mantle lithosphere during the final stages of oblique continental collision.     

Palinspastic reconstruction of the Grenville terrane in the Blue Ridge Geologic Province,southern and central Appalachians,U.S.A

Examinations of Grenville massifs in the Blue Ridge Geologic Province of Virginia and North Carolina indicate that the country rocks (∼ 1100–1450 Ma) are layered gneisses that were metamorphosed during Grenville orogenesis (∼ 1000–1100 Ma) to amphibolite to granulite facies and intruded by plutonic suites. Subsequently, the Grenville terrane was intruded by a suite of peralkaline granitic plutons (∼ 700 Ma) and progressively overlapped westward by Upper Precambrian to Cambrian sedimentary and volcanic rocks. Following deposition of Upper Precambrian and Palaeozoic rocks, the Blue Ridge Geologic Province was subjected to Taconic metamorphism (∼ 450–480 Ma) which generally increased in intensity southeastward from greenschist (chlorite grade) to upper amphibolite (sillimanite grade) facies. Large-scale late Devonian thrusting (∼ 350 Ma) along the Fries fault system and the Brevard zone-Yadkin fault system produced the present day distribution of juxtaposed Grenville massifs and Palaeozoic metamorphic zones in the Blue Ridge Geologic Province. Palinspastic restoration of the Taconic metamorphic zones to their pre-late Devonian relative positions yields an ∼ 50 km displacement on the Fries fault system near the Grandfather Mountain window and and an ∼ 80 km displacement on the Smith River allochthon farther east. Restoration of the Grenville massifs to this same palinspastic base shows that Grenville metamorphic grade decreased southeastward from the deeper granulite facies (opx + gar) to the shallower granulite facies (opx ± amp) to amphibolite facies.     

Thermal-baric structure and P–T history of the Brooks Range metamorphic core, Alaska

Documentation of pressure–temperature (P–T) histories across an epidote‐amphibolite facies culmination provides new insight into the tectono‐thermal evolution of the Brooks Range collisional orogen. Thermobarometry reveals that the highest grade rocks formed at peak temperatures of 560–600 °C and at pressures of 8–9.5 kbar. The thermal culmination coincides with the apex of a structural dome defined by oppositely dipping S2 crenulation cleavages suggesting post‐metamorphic doming. South of the thermal culmination, greenschist facies and lowermost epidote‐amphibolite facies rocks preserve widespread evidence for an early blueschist facies metamorphism. In contrast, no evidence for an early blueschist facies metamorphism was found in similar grade rocks of the northern flank, indicating that the southern flank underwent initial deeper burial during southward underthrusting of the continental margin. Thus, while the dome shows a symmetric distribution of peak temperatures, the P–T paths followed by the two flanks must have varied. This variation suggests that final thermal re‐equilibration to greenschist and epidote–amphibolite facies conditions did not result from a simple process of southward underthrusting followed by thermal re‐equilibration from the bottom upward. The new data are inconsistent with a previous model that invokes such re‐equilibration, along with northward thrusting of epidote–amphibolite facies rocks over lower grade rocks presently on the southern flank of the culmination, to produce an inverted metamorphic field gradient. Instead, it is suggested that following blueschist facies metamorphism, rocks of the southern and northern flanks were juxtaposed, during which time the more deeply buried south flank was partially emplaced above rocks to the north, where they escaped Albian epidote–amphibolite facies overprinting. Porphyroblast growth, which post‐dates the main fabric on the north flank of the culmination may be the result of Albian thermal re‐equilibration following this deformation. Post‐metamorphic doming resulted from a combination of Albian‐Cenomanian extension and Tertiary deformation.     

Inverted metamorphic sequence in the Sikkim Himalayas: crystallization history, P–T gradient and implications

The metapelitic rocks of the Sikkim Himalayas show an inverted metamorphic sequence (IMS) of the complete Barrovian zones from chlorite to sillimanite + K‐feldspar, with the higher grade rocks appearing at progressively higher structural levels. Within the IMS, four groups of major planar structures, S₁, S₂ and S₃ were recognised. The S₂ structures are pervasive throughout the Barrovian sequence, and are sub‐parallel to the metamorphic isograds. The mineral growth in all zones is dominantly syn‐S₂. The disposition of the metamorphic zones and structural features show that the zones were folded as a northerly plunging antiform. Significant bulk compositional variation, with consequent changes of mineralogy, occurs even at the scale of a thin section in some garnet zone rocks. The results of detailed petrographic and thermobarometric studies of the metapelites along a roughly E–W transect show progressive increase of both pressure and temperature with increasing structural levels in the entire IMS. This is contrary to all models that call for thermal inversion as a possible reason for the origin of the IMS. Also, the observation of the temporal relation between crystallization and S₂ structures is problematic for models of post‐/late‐metamorphic tectonic inversion by recumbent folding or thrusting. A successful model of the IMS should explain the petrological coherence of the Barrovian zones and the close relationship of crystallization in each zone with S₂ planar structures along with the observed trend(s) of P–T variation in Sikkim and in other sections. A discussion is presented of some of the available models that, with some modifications, seem to be capable of explaining these observations.     

Proterozoic low-pressure/high-temperature metamorphism and an anticlockwise P–T–t path for the Hazeldene area, Mount Isa Inlier, Queensland, Australia

In the Hazeldene area, situated in the Mount Isa Inlier, Queensland, the metamorphic grade changes from chlorite zone, through biotite and cordierite zones, to sillimanite/K-feldspar zone.
Microstructural studies of rocks near the sillimanite isograd demonstrate that cordierite grew early during the development of a steep foliation (S2), was replaced by biotite, andalusite and sillimanite at the metamorphic peak late in S2, and in turn by kyanite + chlorite adjacent to localized small post-D2 shear zones. Although the anticlockwise P–T–t path is well defined, the precise P–T conditions are uncertain because of problems with experimental and thermodynamic data. The best estimate for the metamorphic peak for rocks close to the sillimanite isograd is around 600° C at 4 kbar.
The metamorphism has been dated at 1544 Ma, and was synchronous with a major crustal shortening event. Because proposed extensional events occurred more than 60 Ma earlier, their contribution to the peak metamorphic thermal perturbation would have been insignificant. The syn-metamorphic Mica Creek Pegmatites, the abundance of high heat-producing elements in the nearby pre-D2 Sybella Granite, and advective heat by fluids which caused considerable metasomatism in the Hazeldene area, may have each contributed to the thermal budget. However, the metamorphic thermal gradient may be 80°C km^-1 or higher, strongly suggesting a local magmatic control. As none are known in the area, such syn-metamorphic plutons would have to lie beneath the exposed high-grade rocks.     

Evidence for an inverted metamorphic gradient associated with a Precambrian suture, southern Wyoming

Abstract An inverted metamorphic gradient associated with the northern mylonite zone of the Cheyenne belt, a deeply eroded Precambrian suture in southern Wyoming, has been documented within metasedimentary rocks of the Early Proterozoic Snowy Pass Supergroup. Metamorphic grade in the steeply dipping supracrustal sequence increases from the chlorite through the biotite, garnet, and staurolite zones both stratigraphically and structurally upward toward the northern mylonite zone. A minimum temperature increase of approximately 100° C over a km-wide zone is required for this transition. Parallelism of inverted isograds with the trace of the northern mylonite zone implies a genetic relationship between deformation associated with that zone and the inverted metamorphic gradient within the Snowy Pass Supergroup. Field evidence together with microstructural and petrofabric analysis indicate northward thrusting of amphibolite-grade rocks over rocks of the Snowy Pass Supergroup along the northern mylonite zone. Mineral equilibria and garnet-biotite geothermometry on synkinematic mineral assemblages within the Snowy Pass metasedimentary rocks indicate deformation at minimum temperatures of 480° C and pressures of 350–400 MPa (3°5–4°0 kbar). This implies tectonic burial or upper plate thickness of 13–15 km. The narrow character of metamorphic zonation and microtextures within the Snowy Pass Supergroup which indicate late synkine-matic growth of garnet and staurolite, preclude rotation of pre-existing isograds by folding as a mechanism for development of the inverted gradient. Conductive transport of heat from the upper into the lower plate across the originally low-angle thrust is insufficient to produce the necessary temperatures in the lower plate. Shear heating is considered insufficient to produce the observed metamorphic transition unless high shear stresses are postulated. Up-dip advection of metamorphic fluids is a feasible, but unproven, mechanism for heat transport. The possibility that rapid uplift due to stacking of several thrust sheets may have played a role in preserving the inverted metamorphic gradient cannot be evaluated at present.     

内蒙古大青山一带早元古宙钾长花岗岩系的深熔成因及其构造环境

内蒙古大青山一带钾长花岗岩系同早元古宙再造岩系密切相伴生，其地质学、岩石学和地球化学特征表明，该区早元古宙时陆－陆碰撞挤压－逆冲作用引发陆壳物质的变质－深熔作用，生成钾长花岗质岩浆，经团结先后生成了黑云母二长花岗岩－正长花岗岩－碱长花岗岩系列岩石。因其经受了由北向南的挤压－逆冲作用，也就构成了东西向的钾长花岗岩带。     

Inverted metamorphism and the Main Central Thrust: field relations and thermobarometric constraints from the Kishtwar Window, NW Indian Himalaya

Following the early Eocene collision of the Indian and Asian plates, intracontinental subduction occurred along the Main Central Thrust (MCT) zone in the High Himalaya. In the Kishtwar–Zanskar Himalaya, the MCT is a 2 km thick shear zone of high strain, distributed ductile deformation which emplaces the amphibolite facies High Himalayan Crystalline (HHC) unit south‐westwards over the lower greenschist facies Lesser Himalaya. An inverted metamorphic field gradient, mapped from the first appearance of garnet, staurolite and kyanite index minerals, is coincident with the high strain zone. Petrography and garnet zoning profiles indicate that rocks in the lower MCT zone preserve a prograde assemblage, whereas rocks in the HHC unit show retrograde equilibration. Thermobarometric results derived using THERMOCALC indicate a P–T increase of c. 180 °C and c. 400 MPa across the base of the MCT zone, which is a consequence of the syn‐ to postmetamorphic juxtaposition of M1 kyanite grade rocks of the HHC unit on a cooling path over biotite grade footwall rocks, which subsequently attain their peak (M2) during thrusting. Inclusion thermobarometry from the lower MCT zone reveals that M2 was accompanied by loading, and peak conditions of 537±38 °C and 860±120 MPa were attained. M1 kyanite assemblages in the HHC unit, which have not been overprinted by M2 fibrolitic sillimanite, were not significantly affected by M2, and conditions of equilibration are estimated as 742±53 °C and 960±180 MPa. There is no evidence for dissipative or downward conductive heating in the MCT zone. Instead, the primary control on the distribution of peak assemblages, represented by the index minerals, is postmetamorphic ductile thrusting in a downward propagating shear zone. Polymetamorphism and diachroneity of equilibration are also important controls on the thermal profile through the MCT zone and HHC unit.     

北祁连中段加里东俯冲－增生杂岩/火山弧带及其变形特征

分布于北祁连造山带中段的加里东期俯冲－增生杂岩／火山弧带可划分为托莱山俯冲杂岩带和走廊南山增生杂岩／火山弧带两个亚带。前者主要由蛇绿岩、蛇绿混杂岩及深海复理石组成，为古祁连洋俯冲作用后期由于岛弧的阻力在浅部刨铲作用的产物；后者由不完整的蛇绿岩透镜体、高压变质岩、弧火山岩及一些变质碎屑岩等组成，反映古祁连洋不断向北俯冲，火山弧前锋南移，增生杂岩不断增厚且在其下部发生板底垫托作用以及海沟不断向南倒退的复杂演化历史。俯冲－增生杂岩在加里东期共经历三期变形作用（Ｄ＿１、Ｄ＿２、Ｄ＿３）。Ｄ＿１、Ｄ＿２为简单剪切变形机制，反映从Ｎ向Ｓ的逆冲方向。Ｄ＿３为压扁型变形机制，代表走廊南山古岛弧与中祁连地块碰撞时的挤压变形。     

内蒙大青山早前寒武纪变质岩和早期陆壳的演化

将大青山地区早前寒武纪变质岩石分成三个岩性构造组合.即(1)麻粒岩—紫苏花岗岩组合;(2)角闪片麻岩—英云闪长岩组合;(3)富铝片麻岩—钾质花岗岩组合.其中,组合(1)是区内最古老的物质组成,其形成时代至少应在晚太古代以前(>2800Ma).组合(2)是具花岗—绿岩带特征的晚太古代中、低级变质岩系.组合(3)是经早元古造山变质作用形成的岩石组合.根据重新排定的地质事件顺序,对本区早期地壳演化的有关问题进行了讨论.     

Ophiolitic and metamorphic rocks in the Percy Isles and Shoalwater Bay region,New England Fold Belt,central Queensland

Ophiolitic and metamorphic rocks of the eastern part of the New England Fold Belt in the Shoalwater Bay region and the Percy Isles are grouped in the Marlborough and Shoalwater terranes, respectively. Marlborough terrane units occur on South Island (Percy Isles) and comprise the Northumberland Serpentinite, antigorite serpentinite with rodingite and more silicic dykes and mafic inclusions, the Chase Point Metabasalt, some 800+ metres of pillow lava, and the intervening South Island Shear Zone containing fault‐bounded slices of mafic and ultramafic igneous rocks, schist, and volcaniclastic sedimentary rocks, and zones of mélange. The Shoalwater terrane, an ancient subduction complex, consists of the Shoalwater Formation greenschist facies metamorphosed quartz sandstone and mudstone on North East Island and on the mainland at Arthur Point, the Townshend Formation, amphibolite‐grade quartzite, schist and metabasalt on Townshend Island, and the Broome Head Metamorphics on the western side of Shoalwater Bay, upper amphibolite facies quartz‐rich gneiss. With the exception of a sliver emplaced onto the western Yarrol terrane, possibly by gravity sliding, Shoalwater terrane rocks show the effects of Late Permian polyphase deformation. The Shacks Mylonite Zone along the northwest edge of the Broome Head Metamorphics marks a zone of oblique thrusting and is part of the major Stanage Fault Zone. The latter is a northeast‐striking oblique‐slip dextral tear fault active during Late Permian west‐directed thrusting that emplaced large ultramafic sheets farther south. Marlborough terrane rocks were emplaced along the Stanage Fault Zone, probably from the arc basement on which rocks of the Yarrol terrane were deposited. Structural trends and the distribution of rock units in the Shoalwater Bay‐Percy Isles region are oblique to the overall structural trend of the northern New England Fold Belt, probably due to the presence of a promontory in the convergent margin active in this region in Devonian and Carboniferous time.     

Metamorphic evolution of the southern part of the Hidaka belt, Hokkaido, Japan

Abstract The Hidaka metamorphic terrane in the Meguro-Shoya area, Hokkaido, Japan is divided into four progressive metamorphic zones: A—biotite zone; B—cordierite zone; C—cordierite–K-feldspar zone; and, D—sillimanite–K-feldspar zone of the andalusite–sillimanite facies series type of metamorphism. The metamorphic grade ranges from the higher temperature part of the greenschist facies (zone A) through the amphibolite facies (zones B and C) to the lower temperature part of the granulite facies (zone D). The zone boundaries intersect the bedding planes at high angles. P–T conditions estimated are 450–550°C and 2 kbar for zone A, 550–600°C and 2–2.5 kbar for zone B, 600–650°C and 2.5–3 kbar for zone C and 650–750°C and 3–4 kbar for zone D. The metapelites of zone D were partially melted.
At the later stage of the regional metamorphism which is early Oligocene to early Miocene in age, cordierite tonalite and biotite tonalite intrusives associated with segments of the highest grade rocks (zone D) were emplaced into the lower temperature part of the regional metamorphic rocks, giving rise to a contact metamorphic aureole. The thermally metamorphosed terrain (zone C') belongs to the amphibolite facies and its P–T conditions are estimated to have been 550–700°C and 2 kbar.
The P–T–t paths of the Hidaka metamorphism show a thickening–heating–uplifting process. The metamorphism is inferred to have taken place beneath an active island arc accompanied by partial melting of the crust.