Constraints from Moho geometry and crustal thickness on the geodynamic origin of the Vrancea Seismogenic Zone (Romania)

Reprocessing of industry deep seismic reflection data (Ramnicu Sarat and Braila profiles) from the SE Carpathian foreland of Romania provides important new constraints on geodynamic models for the origin of the intermediate depth Vrancea Seismogenic Zone (VSZ). Mantle (70–200 km) earthquakes of the VSZ are characterized by high magnitudes (greater than 6.5), frequent occurrence rates (approximately 25 years), and confinement in a very narrow (30 × 70 × 200 km³) near vertical zone atypical for a Wadati–Benioff plane, located in front of the orogen. These two deep (20 s) seismic reflection profiles (70 km length across the foreland) reveal (1) a high-amplitude, gently east-dipping reflection across most of the section from what we interpret to be the Moho at  15 s (40–42 km) on the Ramnicu Sarat line to  16 s (47–48 km) on the Braila line, (2) a thick sedimentary cover increasing in thickness from east (1 s;  800 m) to west (7.5 s; 14 km), (3) an eastward increase in crustal thickness from 38 km (near VSZ) to  45 km, (4) seismic and topographic evidence for a newly imaged, possibly seismically active basement fault with a surface offset of 30 m observed on the Ramnicu Sarat line, (5) a lack of notable west-dipping structures in the crust and across the Moho, and (6) variable displacements on Peceneaga–Camena Fault of  5 km at Moho and  200 m at the basement–sedimentary cover contact.These observations appear to argue against recent models for west-dipping subduction of oceanic lithosphere at or in the vicinity of the Vrancea Seismogenic Zone given the lack of west-dipping fabrics in the lower crust and across the crust–mantle boundary. Consequently, one possible explanation for the geodynamic origin of VSZ could be partial delamination of the continental lithosphere in an intra-plate setting along a sub-horizontal lithospheric interface in the Carpathian hinterland that likely involves remnant lithospheric coupling between the crust and uppermost mantle in the foreland.     

3-D upper crustal tomographic structure across the Vrancea seismic zone, Romania

The VRANCEA99 and VRANCEA2001 seismic refraction experiments are part of a multidisciplinary project to study the Eastern Carpathians in Romania. The objectives of these studies are intended to disclose a more detailed picture of the crustal and upper mantle structures above the seismically active Vrancea region. In this paper we provide additional constraints for the upper crustal structures of the area. The 1999 campaign consisted of a 320-km-long N–S profile and a 70-km-long E–W profile. The intersecting 2001 profile extended in E–W direction from the Hungarian border to the Black Sea. In order to enhance the model resolution, first arrival data from local crustal earthquakes were also included.This configuration allowed for the first time to derive a 3-D velocity model for the upper crust of the Romanian Carpathian Orogen, within a 115×235 km wide region, centred over the Vrancea seismic zone. The 3-D model reveals lateral velocity variations, which were not visible on the in-line interpretations. It allows us to distinguish between foreland platform areas, foreland basins and the Carpathian Orogen. Clear velocity differences between the foreland basins south and southeast of the Eastern Carpathians and the Focsani Basin further north indicate different pre-Miocene sedimentary compositions and geological evolutions of these foreland platforms. The involved Moesian and Scythian platforms are separated by the Trotus Fault system, which is observed as a velocity discontinuity. An upper crustal high-velocity zone, above the northern Vrancea seismic zone, could also be identified. This high-velocity zone is explained by a Middle Pliocene to Pleistocene E–W oriented out-of-sequence thrust of the crystalline basement, below the decollement of the flysch nappes.     

A New Probabilistic Seismic Hazard Analysis for the Vrancea (Romania) Seismogenic Zone

In this paper we apply a probabilistic methodology to map specific seismic hazard induced by the Vrancea Seismogenic Zone, which represents the uttermost earthquake danger to Romania as well as its surroundings. The procedure is especially suitable for the estimation of seismic hazard at an individual site, and seismic hazard maps can be created by applying it repeatedly to grid points covering larger areas. It allows the use of earthquake catalogues with incompletely reported historical and complete instrumental parts. When applying themethodology, special attention was given to the effect of hypocentral depth and the variation of attenuation according to azimuth. Hazard maps specifying a 10% chance of exceedance of the given peak ground acceleration value for an exposure time of 50 years were prepared for three different characteristic depths of earthquakes in the Vrancea area. These maps represent a new realistic contribution to the mitigation of the earthquake risk caused by the Vrancea Seismogenic Zone in terms of: (1) input data (consistent, reliable, and the most complete earthquake catalogue), (2) appropriate and specific attenuation relationships (considering both azimuthal and depth effects); and (3) a new and versatile methodology.     

Crustal constraints on the origin of mantle seismicity in the Vrancea Zone, Romania: The case for active continental lithospheric delamination

The Vrancea zone of Romania constitutes one of the most active seismic zones in Europe, where intermediate-depth (70–200 km) earthquakes of magnitude in excess of M_w = 7.0 occur with relative frequency in a geographically restricted area within the 110° bend region of the southeastern Carpathian orogen. Geologically, the Vrancea zone is characterized by (a) a laterally restricted, steeply NW-dipping seismogenic volume (30 × 70 × 200 km), situated beneath (b) thickened continental crust within the highly arcuate bend region of the Carpathian orocline, and (c) miscorrelation of hypocenters with the position of known or inferred suture zones in the Carpathian orogenic system. Geologic data from petroleum exploration in the Eastern Carpathians, published palinspastic reconstructions, and reprocessing of industry seismic data from the Carpathian foreland indicate that (1) crust of continental affinity extends significantly westward beneath the external thrust nappes (Sub-Carpathian, Marginal Folds, and Tarcau) of the Eastern Carpathians, (2) Cretaceous to Miocene strata of continental affinity can be reconstructed westward to a position now occupied by the Transylvanian basin, and (3) geologic structure in the Carpathian foreland (including the Moho) is sub-horizontal directly to the east and above the Vrancea seismogenic zone. Taken together, these geologic relationships imply that the Vrancea zone occupies a region overlain by continental crust and upper mantle, and does not appear to originate from a subducted oceanic slab along the length of the Carpathian orogen. Accordingly, the Vrancea zone appears to potentially be an important place to establish evidence for active lithospheric delamination.     

Seismic crustal structure between the Transylvanian Basin and the Black Sea, Romania

In order to study the lithospheric structure in Romania a 450 km long WNW–ESE trending seismic refraction project was carried out in August/September 2001. It runs from the Transylvanian Basin across the East Carpathian Orogen and the Vrancea seismic region to the foreland areas with the very deep Neogene Focsani Basin and the North Dobrogea Orogen on the Black Sea. A total of ten shots with charge sizes 300–1500 kg were recorded by over 700 geophones. The data quality of the experiment was variable, depending primarily on charge size but also on local geological conditions. The data interpretation indicates a multi-layered structure with variable thicknesses and velocities. The sedimentary stack comprises up to 7 layers with seismic velocities of 2.0–5.9 km/s. It reaches a maximum thickness of about 22 km within the Focsani Basin area. The sedimentary succession is composed of (1) the Carpathian nappe pile, (2) the post-collisional Neogene Transylvanian Basin, which covers the local Late Cretaceous to Paleogene Tarnava Basin, (3) the Neogene Focsani Basin in the foredeep area, which covers autochthonous Mesozoic and Palaeozoic sedimentary rocks as well as a probably Permo-Triassic graben structure of the Moesian Platform, and (4) the Palaeozoic and Mesozoic rocks of the North Dobrogea Orogen. The underlying crystalline crust shows considerable thickness variations in total as well as in its individual subdivisions, which correlate well with the Tisza-Dacia, Moesian and North Dobrogea crustal blocks. The lateral velocity structure of these blocks along the seismic line remains constant with about 6.0 km/s along the basement top and 7.0 km/s above the Moho. The Tisza-Dacia block is about 33 to 37 km thick and shows low velocity zones in its uppermost 15 km, which are presumably due to basement thrusts imbricated with sedimentary successions related to the Carpathian Orogen. The crystalline crust of Moesia does not exceed 25 km and is covered by up to 22 km of sedimentary rocks. The North Dobrogea crust reaches a thickness of about 44 km and is probably composed of thick Eastern European crust overthrusted by a thin 1–2 km thick wedge of the North Dobrogea Orogen.     

VRANCEA99—the crustal structure beneath the southeastern Carpathians and the Moesian Platform from a seismic refraction profile in Romania

The VRANCEA99 seismic refraction experiment is part of an international and multidisciplinary project to study the intermediate depth earthquakes of the Eastern Carpathians in Romania. As part of the seismic experiment, a 300-km-long refraction profile was recorded between the cities of Bacau and Bucharest, traversing the Vrancea epicentral region in NNE–SSW direction.

The results deduced using forward and inverse ray trace modelling indicate a multi-layered crust. The sedimentary succession comprises two to four seismic layers of variable thickness and with velocities ranging from 2.0 to 5.8 km/s. The seismic basement coincides with a velocity step up to 5.9 km/s. Velocities in the upper crystalline crust are 5.9–6.2 km/s. An intra-crustal discontinuity at 18–31 km divides the crust into an upper and a lower layer. Velocities within the lower crust are 6.7–7.0 km/s. Strong wide-angle PmP reflections indicate the existence of a first-order Moho at a depth of 30 km near the southern end of the line and 41 km near the centre. Constraints on upper mantle seismic velocities (7.9 km/s) are provided by Pn arrival times from two shot points only. Within the upper mantle a low velocity zone is interpreted. Travel times of a PLP reflection define the bottom of this low velocity layer at a depth of 55 km. The velocity beneath this interface must be at least 8.5 km/s.

Geologic interpretation of the seismic data suggests that the Neogene tectonic convergence of the Eastern Carpathians resulted in thin-skinned shortening of the sedimentary cover and in thick-skinned shortening in the crystalline crust. On the autochthonous cover of the Moesian platform several blocks can be recognised which are characterised by different lithological compositions. This could indicate a pre-structuring of the platform at Mesozoic and/or Palaeozoic times with a probable active involvement of the Intramoesian and the Capidava–Ovidiu faults. Especially the Intramoesian fault is clearly recognisable on the refraction line. No clear indications of the important Trotus fault in the north of the profile could be found. In the central part of the seismic line a thinned lower crust and the low velocity zone in the uppermost mantle point to the possibility of crustal delamination and partial melting in the upper mantle.     

Seismicity Variations in Depth and Time in the Vrancea (Romania) Subcrustal Region

Seismicity patterns that characterize the seismic regime of the Vrancea intermediate-depth earthquakes are investigated using an earthquake catalogue extending from 1974 to 1998. The analysis is made separately on two characteristic segments of the subducted plate (active zones) which hosted the major earthquakes of 4 March 1977, 30 August 1986 and 30 May 1990. Precursory anomalies preceding the occurrence of the major shock of 1986 (M_w = 7.3) in the lower part of the subducted slab are outlined when analyzing the time variation of the parameter (defined as the ratio of small to moderate events in a given active zone and a given time interval) and of the fractal dimension of the earthquake space distribution. Nothing similar is noticed in the upper part of the Vrancea slab. The analyzed time interval covering 25 years shows that, in contrast to previous studies, the statistical fluctuations of the parameter, computed for a time window of 5 months, appear to be too large to be considered as precursory anomalies. Significant differences among characteristic depth segments are also outlined in the frequency–magnitude distribution and are possibly related to differences in the physical mechanism of the earthquake generation process.     

Nature and significance of a Cambro-Ordovician high-K, calc-alkaline sub-volcanic suite: the late- to post-orogenic Motru Dyke Swarm (Southern Carpathians, Romania)

The Motru Dyke Swarm intrudes the Precambrian Danubian basement of the Southern Carpathians (Romania). It is a marker of a sub-volcanic event that occurred during the early Palaeozoic (Cambrian to Ordovician). The geographical distribution of dykes on a ∼2,000 km² area is heterogeneous; several areas of high dyke density have been the subject of a detailed petrological and geochemical study. Taken altogether, the 150 samples define a single complete magmatic series, from basaltic andesite to rhyolite. Whole-rock major element variations show a medium- to high-K, calc-alkaline magmatic suite. The compositional variations and the general decrease of trace element contents (both compatible and incompatible, including REEs) from basaltic andesite to rhyolite are consistent with 1) the fractionation of the observed phenocryst assemblages, Ca-amphibole (Ti-pargasite to magnesiohornblende) followed by intermediate plagioclase, clinopyroxene and accessory biotite and quartz and 2) the absence of lower and/or upper crustal contamination. Trace elements diagrams display typical arc patterns (LILE, Pb and LREE enrichment and relative depletion in Nb-Ta, Zr-Hf and Ti). The Th/U, Nb/Ta and Zr/Hf ratios are constant and close to the mantle values throughout the whole series, which argues that the parental magma was generated from a single and homogeneous enriched lithospheric mantle source. The field regional evidence implies that melting occurred during a late- to post-orogenic period of lithospheric extension, and thus took place quite lately after the cessation of Pan-African subduction.     

Lithospheric structure of the Trans-European Suture Zone along the TTZ–CEL03 seismic transect (from NW to SE Poland)

The large-scale CELEBRATION 2000 seismic experiment investigated the velocity structure of the crust and upper mantle between western portion of the East European Craton (EEC) and the eastern Alps. This area comprises: the Trans-European Suture Zone, the Carpathian Mountains, the Pannonian Basin and the Bohemian Massif. This experiment included 147 chemical shots recorded by 1230 seismic stations during two deployments. Good quality data along 16 main and a few additional profiles were recorded. One of them, profile CEL03, was located in southeastern Poland and was laid out as a prolongation of the TTZ profile performed in 1993. This paper focuses on the joint interpretation of seismic data along the NW–SE trending TTZ–CEL03 transect, located in the central portion of the Trans-European Suture Zone. First arrivals and later phases of waves reflected/refracted in the crust and upper mantle were interpreted using two-dimensional tomographic inversion and ray-tracing techniques. This modelling established a 2-D (quasi 3-D) P-wave velocity lithospheric model. Four crustal units were identified along the transect. From northwest to southeast, thickness of the crust varies from 35 km in the Pomeranian Unit (NW) to 40 km in the Kuiavian Unit, to 50 km in the Radom–Łysogóry Unit and again to 43 km in the Narol Unit (SE). The first two units are thought to be proximal terranes detached from the EEC farther to the southeast and re-accreted to the edge of the EEC during the Early Palaeozoic. The origin of the remaining two units is a matter of dispute: they are either portions of the EEC or other proximal terranes. In the area of the Polish Basin (first two units), the P-wave velocity is very low (V_p < 6.1 km/s) down to depths of 15–20 km indicating that a very thick sedimentary and possibly volcanic rock sequence, whose lower portion may be metamorphosed, is present. The velocity beneath the Moho was found to be rather high, being 8.25 km/s in the northwestern portion of the transect, 8.4 km/s in the central sector, and 8.1 km/s in the southeastern sector.     

The Valanginian history of the eastern part of the Getic Carbonate Platform (Southern Carpathians,Romania): Evidence for emergence and drowning of the platform

Lower Cretaceous successions that crop out in the eastern part of the Getic Carbonate Platform (Southern Carpathians, Romania) preserve records of the Valanginian events in different settings of the platform. The integrated sedimentological, biostratigraphical, geochemical and mineralogical analysis of the upper Berriasian–Valanginian successions reveal successive stages in the evolution of the carbonate platform: (a) pre-drowning stage of the shallow-shelf and slope settings of the platform; (b) subaerial exposure and karstification; and (c) incipient flooding and drowning of the carbonate platform. Following the subaerial exposure, starting in the middle early Valanginian, the eastern part of the Getic Carbonate Platform experienced a drowning phase documented by iron oxyhydroxides, phosphate and glaucony mineralized discontinuity surface and glaucony-rich sediments disposed on the discontinuity surface. Recognition of the diachronous intra-Valanginian discontinuity surface within the studied successions is based on clear evidences (facies contrast, depositional and diagenetic features, biostratigraphic and taphonomic data, and geometrical relations). The negative–positive carbon isotope excursion is correlated with the global perturbations of the carbon cycle related to the Valanginian “Weissert” episode, and it is documented for the first time in the shallowest parts of the Getic Carbonate Platform. Tectonic activity and eustatic sea-level fluctuations were most probably the main factors that led to fault-block tilting, local emersion and subsequent drowning of the eastern part of the Getic Carbonate Platform during the Early Cretaceous. We infer that the eastern part of the Getic Carbonate Platform was affected by late Berriasian–early Hauterivian extensional tectonics that could be related to the Neo-Cimmerian movements with effects generally recognized in the northern peri-Tethyan areas.     

Crustal structure and tectonics of the Hidaka Collision Zone, Hokkaido (Japan), revealed by vibroseis seismic reflection and gravity surveys

This study is the first integrated geological and geophysical investigation of the Hidaka Collision Zone in southern Central Hokkaido, Japan, which shows complex collision tectonics with a westward vergence. The Hidaka Collision Zone consists of the Idon'nappu Belt (IB), the Poroshiri Ophiolite Belt (POB) and the Hidaka Metamorphic Belt (HMB) with the Hidaka Belt from west to east. The POB (metamorphosed ophiolites) is overthrust by the HMB (steeply eastward-dipping palaeo-arc crust) along the Hidaka Main Thrust (HMT), and in turn, thrusts over the Idon'nappu Belt (melanges) along the Hidaka Western Thrust (HWT). Seismic reflection and gravity surveys along a 20-km-long traverse across the southern Hidaka Mountains revealed hitherto unknown crustal structures of the collision zone such as listric thrusts, back thrusts, frontal thrust-and-fold structures, and duplex structures. The main findings are as follows. (1) The HMT, which dips steeply at the surface, is a listric fault dipping gently at a depth of 7 km beneath the eastern end of the HMB, and cutting across the lithological boundaries and schistosity of the Hidaka metamorphic rocks. (2) A second reflector is detected 1 km below the HMT reflector. The intervening part between these two reflectors is inferred to be the POB, which is only little exposed at the surface. This inference is supported by the high positive Bouguer anomalies along the Hidaka Mountains. (3) The shallow portion of the IB at the front of the collision zone has a number of NNE-dipping reflectors, indicative of imbricated fold-and-thrust structures. (4) Subhorizontal reflectors at a depth of 14 km are recognized intermittently at both sides of the seismic profile. These reflectors may correspond to the velocity boundary (5.9–6.6 km/s) previously obtained from seismic refraction profiling in the northern Hidaka Mountains. (5) These crustal structures as well as the back thrust found in the eastern end of the traverse represent characteristics of collisional tectonics resulting from the two collisional events since the Early Tertiary.     

Unraveling multiple provenance areas using sandstone petrofacies and geochemistry: An example in the southern flank of the Golfo San Jorge Basin (Patagonia,Argentina)

The aim of this paper is to study the provenance of Late Cretaceous sandstones deposited along the south flank of the Golfo San Jorge Basin. For this purpose, detrital modes of three hundred thirty-seven sandstone samples collected in the Mina del Carmen, Bajo Barreal, and Cañadón Seco Formations were studied in ten oil fields. According to the modal composition of the sandstones, six petrofacies were defined allowing the identification of not only principal, but also secondary provenance areas. The QVM and VQM petrofacies are more than 20% metamorphic, sedimentary, and polycrystalline quartz clasts (Lm + Ls + Qpg > 20%), evidencing a secondary signal of basement supply masked by a predominant volcanic provenance. The petrofacies VP and VF are characterized by Lm + Ls + Qpg <20% and more than 20% total feldspar (Pm + Om >20%.), which indicate a supply of sediment from volcanic terrains and scarce derivation of materials from basement rocks. Based on the plagioclase/k-feldspar ratio, the VF petrofacies is interpreted to be dominated by the supply of sand grains from the Andean volcanic-arc, while VP is supposed have originated through the erosion of intermediate volcanic rock outcroppings in the Macizo del Deseado. Finally, both the VQ and QV petrofacies show Lm + Ls + Qpg <20% and Pm + Om<20%, indicating a provenance of volcanic areas coupled with minor contributions from basement rocks. During the Late Cretaceous, the Golfo San Jorge Basin underwent a sag phase that was characterized by very scarce volcanism and tectonic activity. Although these conditions did not favor defined patterns in the vertical stacking of petrofacies, the sandstones exhibit remarkable changes in their regional distribution, which were determined by the paleogeography of the basin and differences in basement composition within the source areas. Finally, a paleogeographic model for sediment circulation in the basin is proposed. This model recognizes the main fluvial dispersal trends that flowed northwest to southeast and transported large amounts of volcanic clasts (associated with petrofacies VF-VQ). To the extent that rivers flowed eastward, a secondary supply from the Precambrian basement, which were composed of low-to high-grade metamorphic rocks, was also important (petrofacies association VQM and QVM). The southwestern area of the basin is dominated by VP petrofacies that record the supply of plagioclase-rich volcanic clasts. This petrofacies likely corresponds to the erosion of Jurassic volcanic units that crop out in the Macizo del Deseado.     

Hydrogeochemical characterization and appraisal of groundwater quality for industrial purpose using a novel industrial water quality index (IndWQI) in the Guanzhong Basin,China

Life and the sustainable growth of socioeconomic sectors such as agriculture and industry depend on groundwater, particularly in arid and semi-arid regions where surface water resources are limited. The objectives of the current study are to characterize groundwater chemistry and assess its suitability for industrial usage in the Guanzhong Basin located in the semi-arid region of northwest China. To better understand the hydrogeochemistry in the study area, statistical analysis, ionic plots and Pearson's correlation analysis were conjunctively used. Finally, a novel industrial water quality index (IndWQI) model was developed in this paper to determine the overall industrial water quality based on scaling, corrosion, and foaming coefficients as well as some physicochemical parameters. The contribution of each parameter to the overall industrial water quality was determined using multivariate statistical analysis approaches. The findings reveal that dissolution of minerals such as calcite, dolomite, anhydrite and gypsum regulate the groundwater geochemistry in the study area. In addition, human activities influence the groundwater quality in the study area. According to the novel IndWQI approach, 78.95 % of the confined water samples and 74.51 % of the phreatic water samples have excellent or good quality, and can be safely used for industrial boilers. The geospatial analysis shows that the most contaminated groundwater samples are mainly located in northeast Xi'an and the northeast region of the Guanzhong Basin. The IndWQI model is trustworthy, as it can combine several water quality indices and give an instantaneous impression of the whole groundwater quality for industrial uses. It can serve as a benchmark for other areas across the world with a comparable climate.     

Sedimentology and sequence stratigraphy of a retrogradational fan-delta system within Lower Triassic in the Mabei area,Junggar Basin (northwestern China)

The sedimentology and sequence stratigraphy of a retrogradational fan-delta system within Lower Triassic in the Mabei area of Junggar Basin in northwestern China were investigated using seismic, well log, and core data, complemented by the modern deposition and a flume tank experiment. The Lower Triassic in the Mabei area is dominated by fan deltas, which are composed of fan-delta plain (including subaerial debris flow, braided channel, conglomerate overbank, and floodplain), fan-delta front (including conglomerate shoal and sandy shoal), and prodelta. The braided channels form during the low flood period. The conglomerate overbanks form during the flood period and occupy most part of the fan-delta plain. The conglomerate shoals and sandy shoals form by a sheet flow prograding into lakes and occur as a sheet. The braided channels, conglomerate shoals, and sandy shoals are easy to form high-porosity reservoirs. One long-term base level cycles (LSC1), three middle-term base level cycles (MSC1, MSC2, and MSC3), and fifteen short-term base level cycles are identified. MSC1 is dominated by the fan-delta plain; MSC2 is dominated by the fan-delta front; and MSC3 is dominated by the fan-delta front and prodelta. The stratigraphy shows a proximal-middle-distal trend demonstrating an overall retrogradation stacking pattern. The sequence architecture is controlled by an interplay between lake level changes and sediment supply. The quick rise in the lake level and the creation of accommodation outpacing the rate of sediment supply result in a retrogradational fan-delta syste.     

四川乐山震旦系灯影组火山碎屑岩锆石LA-ICP-MSU-Pb定年及盆地裂陷演化讨论

四川盆地中部晚震旦(埃迪卡拉)世—早寒武世克拉通内裂陷与安岳震旦(埃迪卡拉)系—寒武系特大气田的形成关系密切,年代学研究对认识克拉通内裂陷构造意义重大。对四川盆地乐山先锋剖面灯影组三段火山碎屑岩进行锆石LA-ICP-MS U-Pb定年,研究结果表明四川盆地灯影组三段火山碎屑岩的锆石U-Pb年龄为(539.6±1.4)Ma,年代学结果表明四川盆地灯三段与灯四段属于寒武系。基于灯影组底界(551.1 Ma)、含火山碎屑岩的灯三段(539.6 Ma)、含小壳化石的麦地坪组(535.2 Ma)和下寒武统Ni—Mo多金属硫化物富集层(521.0 Ma)四个等时面构建了克拉通内裂陷演化的时间框架。在此基础上认为四川盆地中部晚震旦(埃迪卡拉)世—早寒武世隆坳构造的形成主要受边界断裂控制,断层活动使裂陷内水体加深,少量灯四段含硅质白云岩沉积后,麦地坪组与筇竹寺组开始沉积,麦地坪组与灯四段的界线在裂陷内与裂陷两侧并不等时,裂陷内麦地坪组、筇竹寺组与裂陷两侧灯影组四段为同期异相沉积。