Mixed carbonates and siliciclastics in the Quaternary of southern Belize: Pleistocene turning points in reef development controlled by sea‐level change

The Belize barrier and atoll reefs represent one of the largest reef structures in the Atlantic Ocean. The southern shelf of Belize is a classic location of a modern mixed carbonate–siliciclastic system. Whereas knowledge of the Holocene deposits in the area is extensive, data on the Pleistocene system are fragmentary. Open questions include: (i) the nature of the reef foundations (carbonate versus siliciclastics); (ii) the ages of the deposits including the initiation of the barrier reef; and (iii) the response of the mixed system to sea‐level fluctuations. The results of a study of borings on the southern Belize shelf are presented here. Six, up to 105 m long borings were made to better understand the history of this important mixed system. Uranium‐series dating in the Pleistocene was not possible because of diagenetic alteration; however, lithostratigraphy, strontium isotopes and calcareous nannofossil biostratigraphy were used to constrain stratigraphic ages. Results support the contention that the Quaternary development in Belize was quite similar to that of other major barrier reefs such as the Florida Reef Tract and, further afield, the Great Barrier and the New Caledonian Barrier Reefs. All of these barrier reefs are mixed carbonate–siliciclastic systems and significant reef growth only began after the onset of high‐amplitude, eccentricity‐controlled sea‐level changes and as late as during the exceptionally long and warm marine isotope stage 11, some 400 ka. In Belize, Early Pleistocene sections at bases of borings include mollusc‐rich wackestones, rare coral packstones and marls, which were deposited under low to moderate energy conditions in a ramp setting before ca 900 ka, during the high sea‐levels of marine isotope stage 25 and possibly earlier (marine isotope stage 31 or 37). The Belize shelf was subaerially exposed for most of the mid‐Pleistocene and was dominated by siliciclastic sedimentation, possibly during marine isotope stages 24 to 12 when highstands were comparatively low. Continuous reefs at the shelf margin were developing during highstands. In the Late Pleistocene, beginning with the long and high highstand of marine isotope stage 11 (some 400 ka), the southern shelf was flooded entirely and carbonates started to dominate once more. Reefs developed on top of siliciclastic deposits on the shelf. A continuous barrier reef came into existence and largely developed on top of carbonates at the shelf margin. During Late Pleistocene lowstands, siliciclastics presumably no longer reached the shelf margin because of the topographic high of the barrier reef platform. The Quaternary Belize example may serve as a model for reconstructing ancient mixed systems in icehouse worlds, however, any extrapolations are limited by the fact that fast‐growing Scleractinian reef‐builders had not yet evolved in the Palaeozoic.     

Subtropical to temperate facies from a transition zone, mixed carbonate–siliciclastic system, Palaeogene, North Carolina, USA

Palaeogene passive margin sediments on the US mid‐Atlantic coastal plain provide valuable insight into facies interaction and distribution on mixed carbonate–siliciclastic shelves. This study utilizes well cuttings, outcrop, core, and seismic data to document temporal and spatial variations in admixed bryozoan‐rich skeletal carbonates and sandy siliciclastic units that were deposited on a humid passive margin located in the vicinity of a major marine transition zone. This zone was situated between north‐flowing, warm waters of the ancestral Gulf Stream (carbonate dominated settings) and south‐flowing, cold waters of the ancestral Labrador Current (siliciclastic dominated settings). Some degree of mixing of carbonates and siliciclastics occurs in all facies; however, siliciclastic‐prone sediments predominate in nearshore settings, while carbonate‐prone sediments are more common in more open marine settings of the inner shelf break and deep shelf. A distinctive dual‐break shelf depositional profile originated following a major Late Cretaceous to Palaeocene transgression that drowned the earlier shallow platform. This profile was characterized by prominent mid‐shelf break dividing the shallow shelf from the deep shelf and a major continental shelf/slope break. Incomplete filling of available accommodation space during successive buildup of the shallow shelf preserved the topographic break on this passive margin. Storm wave base also contributed to the preservation of the dual‐break shelf geometry by beveling shallow shelf sediments and transporting them onto and seaward of the mid‐shelf break. Sediment fines in deep shelf facies were produced in place, transported downdip from the shallow shelf by storm ebb currents and boundary currents, and reworked from adjacent areas of the deep shelf by strike‐parallel boundary currents. Regional climate and boundary currents controlled whether carbonate or siliciclastic material was deposited on the shelf, with warmer waters and more humid climates favouring carbonate deposition and cooler, more arid conditions favouring glaucony and siliciclastic dominated deposition. Continuous wave and current sweeping of the shallow shelf favoured deposition of mud‐lean facies across much of the shallow shelf. Skeletal components in much of the carbonate‐rich strata formed in warm, nutrient‐rich subtropical waters, as indicated by widespread occurrences of larger benthic foraminifera and molluscan assemblages. These indicators of warm water deposition within the bryozoan‐mollusk‐rich carbonate assemblage on this shelf provide an example of a warm water bryomol assemblage; such facies generally are associated with cooler water depositional settings.     

Paleogeography and structure of the central Mediterranean: Sicily and its offshore area

The geology of the mainland and offshore of Sicily is illustrated by a few geologic sections and seismic profiles across the late Cenozoic orogenic belt of central and western Sicily and across the Sardinia Channel and Sicily Straits. This belt is the result of several tectonic events. Deformation involved mainly the sedimentary cover of the old African continental margin characterized by a broad basinal domain, flanked along its external (southern) margin by a shallow-water carbonate platform attached to Africa in the Triassic. Compressional deformation started in the more internal basinal rock assemblages overlying a thinned crust. The most important structural characteristic of the early phase of thrusting is the duplex pile forming the bulk of the chain in Central Western Sicily. The structure consists of a basal allochthon, made up of Permian to Middle Triassic layers, an intermediate duplex wedge, composed of competent Mesozoic carbonates, and a roof complex, including Upper Mesozoic-Lower Tertiary less competent rocks. Large-scale clockwise rotation of the thrusts accompanied transpressional movements in the hinterland during the Pliocene. Right oblique reverse faults modified the previous tectonic contacts between the allochthons in the hinterland zones. Contemporaneous south-directed imbrications affected the southern external areas, progressively incorporating foreland and piggyback basins. Development of the Gela Thrust System appears to be linked to the transpressional event; its accretion is also related to contemporaneous underthrusting at deeper levels of Mesozoic carbonate substratum. The older buried thrust sheets were pushed up to the surface breaching the deformed Tertiary cover of the Gela TS. Northwards in the belt post-Messinian normal growth faults opened half graben whose sedimentary fill underwent structural inversion. Alternation of extension and compression tectonics characterizes the Sicilian continental margin in the last million years.     

Sedimentology and facies analysis of Miocene mixed siliciclastic–carbonate deposits of the Dam Formation in Al Lidam area,eastern Saudi Arabia

The Burdigalian mixed siliciclastic–carbonate deposits of the Dam Formation are well-exposed in Al Lidam area, in the eastern province of Saudi Arabia. They represent a shallow part of the Arabian plate continental margin. The Dam Formation is correlatable to the Miocene reservoirs in both Iran and Iraq. Therefore, studying the Dam Formation lithologic heterogeneity in a small distance with high resolution could help in further work related to pattern prediction of the Miocene reservoir properties. High-resolution sedimentological investigation was carried out through six outcrops. The facies parameters (lithology, sedimentary structures, main fossils, paleocurrent patterns and geometries of the sedimentary bodies) were described. The results revealed 15 lithofacies that have been further grouped into 7 lithofacies associations 5 of which are carbonates and include (1) interbedded dolostone and evaporates, (2) microbialite buildup, (3) ooid-dominated grainstones, (4) burrowed skeletal peloidal wackestone–packstone and (5) mollusc-dominated wackestone–packstone. The remaining two associations are of siliciclastics and include (6) intertidal siliciclastics and (7) wave-dominated siliciclastics. These lithofacies were interpreted to reflect deposition in a mixed siliciclastic–carbonate ramp system that includes subtidal, shoreface, intertidal, foreshore, supratidal and estuarine deposits in a shallowing-upward succession. Each one of these lithofacies association has distinct geometry and architecture pattern. Oolites and heterozoan lithofacies occur as sheets and show great continuity along the strike direction. Oolites pass laterally in the dip direction into more skeletal- and peloid-dominated zones, whereas heterozoan lithofacies stay continuous in the dip directions and change from siliciclastic to carbonate heterozones. In contrast, microbialite lithofacies lack continuous beds and occur as localised bioherms and biostroms. Channelised lithofacies are restricted laterally into isolated channel bodies and vertically in the contact boundary between siliciclastic and carbonate lithofacies, whereas the interbedded dolostone and evaporite lithofacies form distinct, relatively thick continuous layers. With continuous exposures in both strike (1.2 km) and dip (0.15 km) directions, the outcrops in the Al Lidam area provide unique opportunity to study the heterogeneity among lithofacies of the mixed siliciclastic–carbonate system of the Dam Formation. Such study may provide insights to predict occurrence and distribution of lithofacies bodies in their equivalent reservoirs which are important for reservoir characterisation.     

Coastal margin evolution and postulated “basin‐shipyard” area at ancient Locri‐Epizephiri,Calabria, Italy

Environmental settings on the Ionian coastal plain and inner shelf seaward of Locri‐Epizephiri in Calabria, Italy, differed markedly before, during, and following settlement by the Greeks. Sediment core analyses and geophysical surveys in this study support recent archaeological findings and the hypothesis that the margin may once have served as a harbor and/or shipyard. The subsurface Holocene stratigraphy records that (1) the shoreline advanced to a maximum landward position before Greek settlement, then regressed offshore to what is now the inner shelf before once again migrating landward. These marked coastal shifts were triggered primarily by land uplift and probable subsidence offshore along this structurally active Calabrian Arc segment. Associated with this are: (2) a sediment fining‐upward sequence in Greek–Roman time that indicates only partial protection of the coastal area, and (3) possible presence of subsurface structures seaward of the city wall in a sector now positioned ∼200 m offshore. © 2010 Wiley Periodicals, Inc.     

Depositional systems and sequence stratigraphy analysis of the Upper Callovian to Tithonian sediments in the Central and Western Kopet‐Dagh Basin,Northeast Iran

Upper Callovian to Tithonian (late Jurassic) sediments represent an important hydrocarbon reservoir in the Kopet‐Dagh Basin, NE Iran. These deposits consist mainly of limestone, dolostone, and calcareous mudstone with subordinate siliciclastic interbeds. Detailed field surveys, lithofacies and facies analyses at three outcrop sections were used to investigate the depositional environments and sequence stratigraphy of the Middle to Upper Jurassic interval in the central and western areas of the basin. Vertical and lateral facies changes, sedimentary fabrics and structures, and geometry of carbonate bodies resulted in recognition of various carbonate facies related to tidal flats, back‐barrier lagoon, shelf‐margin/shelf‐margin reef, slope and deep‐marine facies belts. These facies were accompanied by interbedded beach and deep marine siliciclastic petrofacies. Field surveys, facies analysis, parasequences stacking patterns, discontinuity surfaces, and geometries coupled with relative depth variation, led to the recognition of six third‐order depositional sequences. The depositional history of the study areas can be divided into two main phases. These indicate platform evolution from a rimmed‐shelf to a carbonate ramp during the late Callovian–Oxfordian and Kimmeridgian–Tithonian intervals, respectively. Significant lateral and vertical facies and thickness changes, and results obtained from regional correlation of the depositional sequences, can be attributed to the combined effect of antecedent topography and differential subsidence related to local tectonics. Moreover, sea‐level changes must be regarded as a major factor during the late Callovian–Tithonian interval. Copyright © 2015 John Wiley & Sons, Ltd.     

Holocene storage of siliciclastic sediment around islands on the middle shelf of the Great Barrier Reef Platform, north-east Australia

Thick sequences of sediment surround the Whitsunday Islands on the middle shelf of the Great Barrier Reef (GBR) Platform. Much of this sediment is siliciclastic material deposited since the sea‐level highstand at around 6·5 ka. This raises a mass balance dilemma because modern terrigenous discharge to the GBR Platform is restricted to the inner shelf. Shallow seismic profiles and sediment samples were collected over 450 km² around the Whitsunday Islands to quantify the mass of siliciclastic sediment for a dynamic model of the shelf. The sea floor and pre‐Holocene surfaces were mapped using 4584 stations along the seismic profiles and a graphical computer program. The total volume of sediment between these two surfaces is 3·67 ± 0·45 × 10⁹ m³. This volume is composed of buried reefs (0·13 ± 0·01 × 10⁹ m³), medium‐ (0·70 ± 0·30 × 10⁹ m³) and fine‐grained shoals (2·84 ± 0·35 × 10⁹ m³). The volume estimates combined with measurements of carbonate concentration, density and porosity indicate that 1850 ± 380 Mt of Holocene siliciclastic sediment surround the Whitsunday Islands in medium‐ (510 ± 225 Mt) and fine‐grained shoals (1340 ± 155 Mt). The total mass of siliciclastic material is 1·7–2·6 times that stored in Cleveland Bay, a similar sized repository on the inner shelf. A simple numerical model has been constructed to explain this large quantity of Holocene siliciclastic sediment. The model results in the appropriate siliciclastic mass next to the Whitsunday Islands by integrating regional shelf processes over time. Unlike the present day, rivers discharged sediment to the middle shelf during the early Holocene. This material was subsequently focused by northward transport into the vicinity of the islands, a geomorphologically complex region that serves as a sediment trap. Although direct riverine inputs to the middle shelf have stopped during the present sea‐level highstand, previously deposited siliciclastic sediment is continually being winnowed from the middle shelf and redeposited next to the Whitsunday Islands. The transport and distribution of siliciclastic sediment on the GBR Platform is thus influenced significantly by storage around islands on the middle shelf.     

The stratigraphic architecture and evolution of the Burdigalian carbonate—siliciclastic sedimentary systems of the Mut Basin,Turkey

This study describes the coeval development of the depositional environments in three areas across the Mut Basin (Southern Turkey) throughout the Late Burdigalian (early Miocene). Antecedent topography and rapid high-amplitude sea-level change are the main controlling factors on stratigraphic architecture and sediment type. Stratigraphic evidence is observed for two high-amplitude (100–150 m) sea-level cycles in the Late Burdigalian to Langhian. These cycles are interpreted to be eustatic in nature and driven by the long-term 400-Ka orbital eccentricity-cycle-changing ice volumes in the nascent Antarctic icecap. We propose that the Mut Basin is an exemplary case study area for guiding lithostratigraphic predictions in early Miocene shallow-marine carbonate and mixed environments elsewhere in the world.The Late Burdigalian in the Mut Basin was a time of relative tectonic quiescence, during which a complex relict basin topography was flooded by a rapid marine transgression. This area was chosen for study because it presents extraordinary large-scale 3D outcrops and a large diversity of depositional environments throughout the basin. Three study transects were constructed by combining stratal geometries and facies observations into a high-resolution sequence stratigraphic framework. 3346 m of section were logged, 400 thin sections were studied, and 145 biostratigraphic samples were analysed for nannoplankton dates (Bassant, P., 1999. The high-resolution stratigraphic architecture and evolution of the Burdigalian carbonate-siliciclastic sedimentary systems of the Mut Basin, Turkey. PhD Thesis. GeoFocus 3. University of Fribourg, 277 p.).The first transect (Alahan) is on the northwestern basin margin. Here, the siliciclastic input is high due to the presence of a river system. The siliciclastic depocentre migrates landwards during transgressions, creating an ecological window allowing carbonates to develop in the distal part of the delta. Carbonate production shuts down during the regression when siliciclastics return. The second transect (Pirinç) is also situated on the northern basin margin 12 km to the east of the Alahan section. It shows a complete platform-to-basin transition. An isolated carbonate platform complex develops during the initial flooding, which is drowned during a time of rapid sea-level rise and environmental stress, associated with prograding siliciclastics. The shelf margin then retrogrades forming large-scale clinoform geometries and progrades before a major sea-level fall provokes slumping collapse, followed by rebuilding of the shelf margin as sea level rises again. The third transect (Silifke) has a steep asymmetric Pre-Miocene valley-topography, forming a narrow strait, linking the Mut Basin to the Mediterranean. Strong tidal currents are generated in this strait area. Siliciclastic input is low and localised. Eighty metres of cross-bedded bioclastic sands are deposited in a tidal regime at the base. Subsequently, carbonate platforms backstep against the shallow-dipping northern flank, while platforms only develop on the steep southern flank when a firm wide shallow-marine substrate is provided by a bench on the footwall block. The energy of the environment decreases with increased flooding of the strait area.Third-order sequences and higher-order parasequences have been identified in each transect and correlated between transects. Correlations were made using biostratigraphic data and high-resolution sequence stratigraphy in combination with the construction of the relative sea-level curve for each site. The third-order highstands are stacked in a proximal position and separated by exposure surfaces, while the lowstands, deposited in a distal setting, are separated by deep-marine (offshore or subphotic) deposits. The parasequences produce dominantly aggradational and progradational geometries with transgressive ravinement surfaces and exposure surfaces developing at times. Reconstruction of the depositional profile shows that the third-order sequences are driven by relative sea-level oscillations of 100–150 m, and that these may be attributed to 400-Ka orbital eccentricity cycles. The parasequences are driven by eustatic 20–30 m sea-level oscillations, which may be attributed to the 100-Ka orbital eccentricity cycles.The isolated carbonate build-ups in the Pirinç and Alahan transects develop at the same time as bioclastic tidal deposits in the Silifke area during the transgression of sequence 1. This is caused by a difference in hydrodynamic regime: a direct result of basin morphology funneling tidal currents in the Silifke area. We also demonstrate how during the highstands a siliciclastic delta system progrades in the Alahan area, while only 12 km to the east, a fringing carbonate platform develops, showing how siliciclastic input can have a very localised effect on carbonate environments.The exceptional quality of the outcrops with its variety of environments and its location at the Tethyan margin make this site a good candidate for a reference model for Burdigalian reef and platform architectures.     

Are carbonate barrier islands mobile? Insights from a mid to late-Holocene system,Al Ruwais,northern Qatar

Barrier islands are important landforms in many coastal systems around the globe. Studies of modern barrier island systems are mostly limited to those of siliciclastic realms, where the islands are recognized as mobile features that form on transgressive coastlines and migrate landward as sea-level rises. Barrier islands of the ‘Great Pearl Bank’ along the United Arab Emirates coast are the best-known carbonate examples. These Holocene islands, however, are interpreted to be anchored by older deposits and immobile. The mid-Holocene to late-Holocene depositional system at Al Ruwais, northern Qatar, provides an example of a mobile carbonate barrier island system, perhaps more similar to siliciclastic equivalents. Sedimentological and petrographic analyses, as well as ¹⁴C-dating of shells and biogenic remains from vibracored sediments and surface deposits, show that after 7000 years ago a barrier system with a narrow back-barrier lagoon formed along what is now an exposed coastal zone, while, contemporaneously, a laterally-extensive coral reef was forming immediately offshore. After 1400 years ago the barrier system was forced to step ca 3 km seaward in response to a sea-level fall of less than 2 m, where it re-established itself directly on the mid-Holocene reef. Since that time, the barrier has retreated landward as much as 1000 m to its current position, exposing previously-deposited back-barrier lagoonal sediment at the open-coast shoreline. In modern neritic warm-water carbonate settings mobile barrier island systems are rare. Their construction and migration may be inhibited by reef formation, early cementation, and the relative inefficiency of sourcing beach sediments from open carbonate shelves. Carbonate barrier island systems likely formed more commonly during geological periods when ramps and unrimmed shelves predominated and in calcite seas, when meteoric cementation was minimized as a result of initial calcitic allochem mineralogy. As with their siliciclastic analogues, however, recognition of the influence of these transient landforms in the rock record is challenging.     

Geophysical transects of the Labrador Sea: Labrador to southwest Greenland

In 1977 the Federal Institute for Geosciences and Natural Resources, Hannover, carried out a large scale multichannel reflection seismic survey in the Labrador Sea. This survey provided an opportunity for the direct comparison of the geologic structure of the Labrador and Greenland margins. The seismic records across the Labrador Shelf show a thick, prograding sedimentary wedge consisting of several seismic sequences onlapping an acoustic basement that dips steeply seaward. The surface of the acoustic basement is irregular below the continental slope, indicating Late Cretaceous—Early Tertiary faulting. The thick sedimentary section below the slope is divided by an unconformity, tentatively identified as Late Tertiary in age, into two seismic megasequencies which can be subdivided. The acoustic basement on the Greenland side is also strongly faulted but is overlain, in the south, by a thin sedimentary section. The sediment cover thickens on the Greenland Shelf to the north as the shelf becomes wider.As with more southerly parts of the western Atlantic margin, a positive free-air anomaly (30–50 mgal) lies landward of the shelf break off Labrador and a smaller negative anomaly follows the base of the slope. Similar, but generally narrower features are observed along the Greenland margin. West of the negative anomaly off the Greenland slope a narrow band of lower amplitude positive anomalies tends to be associated with an acoustic basement high observed in the reflection profiles. A landward negative gradient in the simple Airy isostatic anomaly across this margin suggests that the ocean—continent boundary is related to this high.Detailed magnetic measurements across the northern Labrador margin show that well-developed oceanic anomalies trending north-northwest lie east of the large Labrador Shelf gravity high, beyond the 2000 m isobath. Landward of these magnetic anomalies is a quiet magnetic zone within which the linear gravity high is parallel to the shelf break and correlates with a deep, sediment-filled basin. It is inferred that oceanic-type crust or greatly-attenuated continental crust underlies this basin and that continental crust thickens markedly westward of the gravity high over a distance of about 50 km.     

Late Quaternary shedding of shallow-marine carbonate along a tropical mixed siliciclastic–carbonate shelf: Great Barrier Reef, Australia

Abstract The north-east Australian margin is the largest modern example of a tropical mixed siliciclastic/carbonate depositional system, with an outer shelf hosting the Great Barrier Reef (GBR) and an inner shelf dominated by fluvially sourced siliciclastic sediment wedges. The long-term interplay between these sediment components and sea level is recorded in the Queensland Trough, a 1–2 km deep N–S elongate basin situated between the GBR platform and the Queensland Plateau. In this paper, 154 samples from 45 surface grabs and six well-dated piston cores were analysed for total carbonate content, carbonate mineralogy and Sr concentration to establish spatial and temporal patterns of carbonate accumulation in the Queensland Trough over the last 300 kyr. Surface carbonate contents are lowest on the inner-shelf (<5%) and in the trough axis (<60%) because of siliciclastic dilution. Carbonate on the shelf is mostly Sr-rich aragonite and high-Mg calcite (HMC), whereas that in the basin is mostly low-Mg calcite. Once normalized to remove the effects of siliciclastic dilution, surface Sr-rich aragonite and HMC abundances decrease linearly to background levels ≈ 100 km seaward of the shelf edge. Core samples show that, over time, normalized aragonite and Sr abundances are greatest during periods of shelf flooding and lowest when sea level drops below the shelf edge. This is consistent with changes in the production of coral and calcareous algae, and the shedding of their debris from the shelf. Interestingly, normalized HMC concentrations on the slope peak during periods of major transgression, perhaps because of maximum off-shelf transport from inter-reef areas or intermediate water dissolution. After accounting for siliciclastic dilution, there are strong similarities in both spatial and temporal patterns of carbonate minerals between slopes and basins of the north-east Australian margin and those of pure carbonate margins such as the Bahamas. A limited set of basic processes, including the formation and breakdown of carbonate on the shelf, the transport of carbonate off the shelf and eustatic sea level, probably controls carbonate accumulation in slope and basin settings of tropical environments, irrespective of proximal siliciclastic sediment sources.     

Post-subduction margin structures along Boyd Strait, Antarctic Peninsula

The Pacific margin of the Antarctic Peninsula to the southwest of the Hero Fracture Zone (HFZ) is a former subducting margin which became inactive following the arrival of ridge crest segments of the Antarctic–Phoenix ridge at the margin during the Tertiary. In contrast, the part of the margin to the northeast of the HFZ remains active. Tertiary convergence was approximately perpendicular to the margin and ongoing motion is thought to have the same orientation. A new seismic reflection profile running along Boyd Strait, just northeast of the landward projection of the HFZ, shows major structural components similar to those typically observed along the margin to the southwest of the HFZ. In order of increasing proximity to the margin, these components are: the inner shelf, the shelf basin, the mid-shelf basement high (MSBH), and the outer shelf. The continuation of the post-subduction margin structures to the active margin suggests that the boundary between crust with passive and active margins characteristics is not sharply defined. Our postulated scenario for tectonic evolution along Boyd Strait is that: (1) before the arrival of the last ridge crest segment to the southwest of the HFZ, the inner shelf and the shelf basin were part of a Cretaceous–Tertiary arc and forearc area, (2) after the arrival, thermal effects resulting from interaction of the ridge crest with the margin just southwest of the HFZ lead to the formation of the MSBH to the northeast, but MSBH uplift in Boyd Strait did not prevent concurrent cross-shelf sediment transport contributing to development of an extensive outer shelf on the seaward flank of the MSBH, (3) Recent extension in Bransfield Strait, a marginal basin to the northeast of the landward projection of the HFZ, has caused about 10 km of seaward deflection in the strike of the part of the MSBH to the northeast of the projection of the HFZ.     

Evolution of a classic sand ridge field: Maryland sector, North American inner shelf

The ridge and swale topography of the Middle Atlantic Bight is best developed on the Delaware-Maryland inner shelf. Here sand ridges can be seen in all stages of formation. Several aspects of the ridge field are pertinent to the problem of ridge genesis. The first is ridge morphology. There is a systematic morphologic change from shoreface ridges through nearshore ridges to offshore ridges, which reflects the changing hydraulic regime. As successively more seaward ridges are examined, maximum side slope decreases, the ratio of maximum seaward slope to maximum landward slope decreases, and the cross-sectional area increases. These changes in ridge morphology with depth and distance from shore appear to be equivalent to the morphologic changes experienced by a single ridge during the course of the Holocene transgression. A second aspect is the change in bottom sediment characteristics that accompanies these large-scale morphologic changes. Megaripples, sand waves and mud lenses appear in the troughs between nearshore and offshore ridges. These changes indicate that the storm flows which maintain ridges are less frequently experienced in the deeper sector, and that the role of high-frequency wave surge becomes less important relative to the role of the mean flow component in shaping the sea-floor. A third aspect is the systematic relationship of grain size to topography. Grain size is 90° out of phase with topography, so that the coarsest sand lies between the axis of the landward trough and the ridge crest, while the finest sand lies between the ridge crest and the axis of the seaward trough. This relationship is characteristic of large-scale bedforms. Finally, flow was measured and transport calculated on the same ridge during a one-month period (November 1976). Threshold was exceeded only during storm events. Mean transport was southerly and a little seaward with respect to both the ridge crest and the shoreline. These flow measurements are in conformity with the pattern of smaller bedforms. A 43-year time series of bathymetric change for this ridge reveals a systematic pattern of landward flank erosion, seaward flank deposition, and seaward crest migration. Sand ridges are considered the consequence of constructive feedback between an initial topography and the resulting distribution of bottom shear stress. The relationship between grain size and topography supports this model, but does not account directly for the oblique angle of the ridge with respect to the coastline. This feature may be due to a more rapid alongshore migration rate of the inshore edge of the ridge than the offshore edge, and the relationship between this migration rate, and the rate of shoreface retreat.     

Late Quaternary sea level and environmental changes from relic carbonate deposits of the western margin of India

Relic carbonate deposits along the western margin of India occur as dolomite crusts, aragonite sands (pelletal / oolitic) and aragonite-cemented limestones, oyster shells, corals, encrusted coralline algal and foraminiferal-dominated nodules. The petrology and mineralogy of the deposits indicate that except for aragonite sands and foraminiferal nodules, the others were formed in shallow marine conditions and serve as sea level indicators. Radiocarbon dates were measured for 62 relic deposits covering the entire margin. The age of these deposits on the continental shelf off Cape Comorin and Mangalore, between 110 and 18 m depth, ranges between 12, 610¹⁴C yr BP and 6,390¹⁴C yr BP. On the northwestern margin of India, especially on the carbonate platform (between 64 and 100 m), the age ranges from 17,250 to 6,730¹⁴C yr BP. The relic deposits of the Gulf of Kachchh at depths between 35 and 25 m are dated at 12,550–9,630¹⁴C yr BP. The age vs. depth plot of the relic deposits further indicates that the Gulf of Kachchh was inundated much early, atleast by 15 ka, after the Last Glacial Maximum, and was subjected to uplift and subsidence during the Holocene. The carbonate platform subsided during the early Holocene. Some of the relic deposits between Cape Comorin and Mangalore plot on or, closely follow the glacio-eustatic sea level curve. Despite abundant siliciclastic flux discharged by the Narmada and Tapti during the early Holocene, the platform off these rivers is largely devoid of this flux and carbonate sedimentation continued until 6,700¹⁴C yr BP. We suggest that the river-derived sediment flux diverted southwards under the influence of the SW monsoon current and, thereby, increased the turbidity on the shelf and slope southeast of the carbonate platform and facilitated the formation of deeper water foraminiferal nodules off Vengurla-Goa.     

A steep-fronted Carboniferous carbonate platform: clinoformal geometry and lithofacies (Picos de Europa, NW Spain)

A steep‐margined carbonate platform is developed in the Carboniferous synorogenic foreland basin of northern Spain. Dips of 60–90° produced during Late Carboniferous thrusting enable cross‐sections of a 4‐km‐wide portion of the marginal area of this platform (Las Llacerias outcrop) to be studied in aerial photographs at a seismic scale. Three stratal domains are observed: (1) a horizontal‐bedded platform; (2) a clinoformal‐bedded margin with a relief of up to 500 m; and (3) a low‐angle toe‐of‐slope, where slope beds interfinger with basin sediments. The slope shows well‐bedded sigmoidal clinoforms with depositional dips ranging from 15° to 32°. Based on lithology and stratal patterns, four facies groups have been recognized: (1) a flat‐topped platform, in which thick algal boundstone, skeletal packstone–grainstone and peloidal micrite wackestone with a poorly rhythmic character prevail; (2) the platform margin and upper slope, characterized by microbial boundstone spanning a bathymetric range of ≈150 m measured from the break of slope; (3) a slope, predominantly composed of margin‐derived rudstones and breccias; and (4) a toe‐of‐slope to basin zone, where a cyclic alternation of spiculitic siltstones, packstone to grainstone calciturbidites and rudstone/breccia is visible. Five successive stages of platform development are deduced: (1) Bashkirian: flooding of the pre‐existing Serpukhovian platform giving rise to the nucleation of a low‐angle ramp to the south‐east of the study area with microbial mud‐mound accumulations, and breccias and calciturbidites on the margins; (2) Early Moscovian: an influx of siliciclastic sediment buried part of the platform and reduced the area of carbonate sedimentation; (3) Moscovian: aggradation and progradation of the carbonate system produced an extensive steep‐margined and flat‐topped shallow‐water platform (shelf system); (4) Latest Moscovian–earliest Kasimovian: drowning of the platform; and (5) Kasimovian: covering of the platform by marly calcareous ramp sediments.     

塔里木盆地西南边缘压扭构造体系及其石油地质意义

塔里木盆地西南边缘发育甫沙-齐姆根和柯克亚-和田南2个压扭构造体系,前者主要是帕米尔弧形构造东北侧的侧向滑移与西昆仑造山带向塔里木盆地的不均匀冲断活动的联合作用结果,后者则主要与西昆仑造山带向塔里木盆地的不均匀冲断作用有关。这两个压扭构造体系主体形成于新近纪以来的喜马拉雅运动,其构造样式在平面上主要为走滑-逆冲断裂和雁列式分布的断裂与背斜,在剖面上则呈现为双重构造与反冲构造的叠加。压扭构造带所遭受的压扭作用从改善储层的储集性能、形成新的油气圈闭、促进油气运移与成藏等方面对塔里木盆地西南边缘的油气成藏发挥了积极作用,压扭构造带是油气勘探的有利构造部位。     

Cat Island platform, Bahamas: an incipiently drowned Holocene carbonate shelf

Analyses of high resolution, seismic reflection profiles and surface sediment samples indicate that the Cat Island shelf is presently in an incipiently drowned state. This small carbonate bank is characterized by a thin (<4 m), coarse-grained, relict sediment cover, along with limited reef development, and a relatively deep (20–30 m) margin indicating that it has been unable to ‘keep-up’ with Holocene sea-level rise. Early flooding at relatively high rates of sea-level rise (4 m kyr^-1, 5–8 × 10³ yr BP) in conjunction with small bank size and relatively low elevation, led to a reduced rate of carbonate accumulation and incipient drowning. The shelf edge currently lies beneath the zone of maximum carbonate production and exposes the interior shelf to open marine conditions which may result in permanent drowning if it is unable to ‘catch-up’ with continued sea-level rise. Sediment facies patterns are largely oriented perpendicular or oblique to the shelf edge and appear to be controlled by shelf circulation patterns focused by bank-margin reentrants. In comparison with most of the northern Bahamas, the Cat Island shelf was flooded earlier and at relatively higher rates of Holocene sea-level rise which led to selective drowning, implying that carbonate platforms need not drown synchronously over widespread areas as commonly thought. The potential rock record of this incipient drowning event would be a thin, open-marine sand sheet of highly degraded cryptocrystalline and aggregate grains associated with poorly developed reefs.     

Paleoecology of mangroves along the Sibun River, Belize

This study examines a sediment core (SR-63) from a mangrove ecosystem along the Sibun River in Belize, which is subject to both changes in sea-level and in the characteristics of the river's drainage basin. Radiocarbon dates from the core show a decreased sedimentation rate from ~ 6 ka to 1 cal ka BP and a marked change in lithology from primarily mangrove peat to fluvial-derived material at ~ 2.5 cal ka BP. Changes in the sedimentation rates observed in mangrove ecosystems offshore have previously been attributed to changes in relative sea-level and the rate of sea-level rise. Pollen analyses show a decreased abundance of Rhizophora (red mangrove) pollen and an increased abundance of Avicennia (black mangrove) pollen and non-mangrove pollen coeval with the decreased sedimentation rates. Elemental ratios ([N:C]_a) and stable isotope analyses (δ¹⁵N and δ¹³C) show that changes in the composition of the organic material are also coeval with the change in lithology. The decrease in sedimentation rate at the site of core SR-63 and at offshore sites supports the idea that regional changes in hydrology occurred during the Holocene in Belize, influencing both mainland and offshore mangrove ecosystems.     

Nearshore cool-water carbonate sedimentation and provenance of Holocene calcareous strandline dunes,southeastern Australia

The southeastern coastal plain of South Australia contains a spectacular and world-renowned suite of Quaternary calcareous eolianites. This study is focused on the provenance of components in the Holocene, actively forming sector, of these carbonate eolian deposits. Research was carried out along seven transects across a lateral distance of 120 km from ～30 m water depth offshore across the beach and into the dunes. Offshore sediments were acquired via grab sampling and SCUBA. Results indicate that dunes of the southern Lacepede and Bonney coasts are composed of siliciclastic particles (mainly quartz), relict allochems, Cenozoic and limestone pieces, but dominated by Holocene invertebrate and calcareous algal biofragments. The most numerous grains are from molluscs > benthic foraminifera ≥ coralline algae, > echinoids and > bryozoans. Most of these particles originate in carbonate factories such as macroalgal forests, rocky reefs, seagrass meadows and low-relief sea-floor rockgrounds. Incorporation of Holocene carbonate skeletons into coastal dunes, however, depends on a combination of: (1) the addition of infauna from intertidal and nearshore environments; (2) the physical characteristics of different allochems and their ability to withstand bioerosion, fragmentation and abrasion; (3) the character of the wave and swell climate; and (4) the nature of eolian transport. Most eolian dune sediment is derived from nearshore and intertidal carbonate factories. This is well illustrated by the abundance of robust infaunal bivalves that inhabit the nearshore sands and virtual absence of bryozoans that are common as sediment particles in offshore water depths >15 m. Importantly, the calcareous eolianites in this cool-water, open-platform carbonate setting are not simply an allochthonous reflection of the offshore marine shelf factories, but more a product of autothonous shallow nearshore–intertidal skeletal production and modification. These findings explain the preponderance of mollusc fragments and lack of bryozoans in similar older Pleistocene calcareous eolianites up to ca 1 million years old across ～2000 km of southern Australia with implications for the older rock record.