塔里木盆地南部玛东早古生代褶皱-冲断带

玛东褶皱-冲断带位于塔里木盆地南部,走向NE-SW,由NW向SE方向冲断。褶皱冲断带发育于寒武-奥陶系,以中寒武统膏-盐层为主滑脱面。中志留统及其以上地层不整合于褶皱冲断带之上。它是世界上保存最好的早古生代褶皱冲断带之一。根据卷入变形最新地层、不整合于褶皱-冲断带之上的最老地层和上奥陶统上部的生长地层,玛东褶皱-冲断带的变形时间为晚奥陶世-早志留世。玛东褶皱-冲断带与其东南侧的塘南褶皱-冲断带同为塔里木盆地南缘早古生代前陆褶皱-冲断带的组成部分,塘南褶皱-冲断带是该早古生代前陆褶皱-冲断带主体的残余,其向NW的主冲断方向代表该前陆褶皱-冲断带的主冲断方向;玛东褶皱-冲断带是该早古生代前陆褶皱-冲断带的前锋,其向SE的冲断具有反冲性质。它们是昆仑早古生代造山作用的重要记录,也是昆仑早古生代碰撞造山带的组成部分,现今保存最好的部分。     

Deformation along a salient-transverse zone junction: An example from the Leamington transverse zone,Utah, Sevier fold-thrust belt (USA)

Within fold-thrust belts, the junctions between salients and recesses may hold critical clues to the overall kinematic history of fold-thrust belts. The deformation history within these junctions is best preserved in areas where thrust sheets extend from a salient through an adjacent recess. We examine one such junction within the Sevier fold-thrust belt (western United States) along the Leamington transverse zone, northern Utah. The Canyon Range thrust sheet can be traced continuously from the Leamington transverse zone to its adjacent salient to the south, the Central Utah segment. Deformation within the Canyon Range thrust sheet took place by faulting and cataclastic flow. Analyses of these fault networks preserved throughout the Canyon Range thrust sheet are used to develop a kinematic history of the Leamington transverse zone. Field data is supplemented by analog sandbox experiments. This study suggests that, in detail, deformation within the overlying thrust sheet may not directly reflect the underlying basement structure. Moreover, these junctions may contain several types of accommodating structures that helped to maintain critical-taper and that serve as potential targets for natural resource exploration.     

准噶尔盆地南缘褶皱-逆冲断层带分析

讨论了与准噶尔盆地南缘褶皱-逆冲断层带有关的4个问题。(1)准噶尔盆地南缘褶皱-逆冲断层带具有纵向分带、横向分段和垂向构造分层的特征:纵向上由南至北可分为逆冲推覆构造带、基底卷入褶皱-冲断带和滑脱型褶皱-冲断带三个带;横向上,基底卷入褶皱-冲断带从西至东按横向调节带分为5个段,构造特征表现为反冲断层从不发育到向南反冲的位移逐渐增大、反冲断层所滑脱的层位亦逐渐加深;滑脱型褶皱-冲断带以红车断裂为界划分为西段和东段,西段构造运动弱,构造变形具双层结构;东段构造运动较强,发育大型冲向后陆的反向逆冲断层,构造变形多具有3层结构。(2)逆冲断层-褶皱类型按其形成机制分为基底卷入型冲断-褶皱、滑脱型冲断-褶皱以及基底卷入-滑脱混合型冲断-褶皱3大类,其中,基底卷入型冲断-褶皱的特征是褶皱作用发生在逆冲断裂之前,而滑脱型冲断-褶皱以冲断和褶皱同时或冲断层先于褶皱形成为特征。(3)本区存在横向和纵向传递带。横向调节带一般分布于基底卷入型褶皱-冲断带,主要为左旋走滑断层;纵向传递带分布于滑脱型褶皱-冲断带,以逆冲断层系斜列分布和位移纵向斜列传递为特征。(4)褶皱-冲断带形成的主控因素主要有:近南北向的水平挤压作用,上新世末—早更新世末和晚侏罗世末发生的构造变形以及古近系、下白垩统和下—中侏罗统发育的三套异常高压泥岩层相关的滑脱作用。     

Structural Geochemical Study of the Yuxi Fold-Thrust Belt in the Southern North China Plate

The gigantic fold-thrust fracture belt that ex-tends for 900 kmto the NWin the southern NorthChina plate strides across three provinces : Shaanxi ,Henan and Anhui .It is one of the most characteristicstructural deformations in the North China plate .Along this structural belt a series of i mportantcoalfields occur ( e . g. Pingdingshan, Queshan,Huainan) inthe southernmost edge of the North Chi-na coal-concentrating basin. Consequently ,this beltis not only of key value for research onthe…     

鄂西弧形构造变形特征及成因机制

对川东-湘鄂西断褶带内鄂西地区的弧形构造,从构造剖面特征、叠加褶皱样式和断裂性质入手进行几何学和运动学分析。结果发现鄂西弧形构造具有多期变形特征:早期普遍为北东东向的直线型褶皱,随着弧形带扩展,在东、西两翼分别发育右行和左行的逆冲-走滑断裂,同时分别形成北北东向和北西西向的弧形褶皱。晚期弧形带中部发育北北东向构造并叠加改造了早期北东东和北西西向褶皱,同时在黄陵背斜以西还发育交切早期构造的北北西向仙女山右行走滑断裂。根据弧形带扩展的几何学-运动学分类原则,并结合前人的古地磁研究结果,推测鄂西弧形构造应属于构造弯曲形成的弯曲弧。区域滑脱层和黄陵隆起阻挡可能是控制弧形样式的主要原因。区域滑脱层控制了拆离滑脱褶皱的构造样式; 黄陵基底隆起的阻挡作用使弧形带东翼进一步弯曲变形,并导致了构造应力场方向发生改变,造成了晚期北北东向与早期北东东向构造的叠加。由此恢复的鄂西弧形构造变形过程对于揭示川东-湘鄂西断褶带构造演化具有重要的指示意义。     

辽西彰武—黑山区逆冲推覆构造的发现及找煤意义

辽西彰武—黑山地区是阜新盆地外围重要的找煤远景区。通过对本区野外地质调查和室内地质资料的分析研究,识别出纬向EW构造带、NEE向华夏系构造带和NNE向新华夏系构造带;划分了近EW向、NE与NNE向褶皱-逆冲构造系,以及NW向、NE和NNE向张扭性断裂系;发现了一系列NE-NEE向的逆冲推覆断层、褶皱和被它们分割的岩体组成的逆冲推覆构造;在该逆冲推覆构造体下,发现了早侏罗北票组的煤系露头并圈出了赋煤预测区;指出NNE向新华夏系构造带中的凹陷是本区的找煤重点。      

祁连山北缘深部弧形褶皱—逆冲带及其油气勘探前景

祁连山北缘-河西走廊西段位于青藏高原东北缘,是新生代陆内构造活动最强烈地区。基于野外构造观测、横跨山前及前陆盆地区的三维地震构造分析与解释,结合地震地质属性提取分析,识别出祁连山北缘-酒泉盆地西段窟窿山-柳沟庄带隐伏的弧形褶皱-逆冲带,该弧形构造是造山带基底逆冲构造楔体垂向差异抬升与向前陆方向差异运动的产物;该弧形结构控制本区下白垩统地层裂缝发育、分布与破裂强度,并与本区先期断裂、裂缝带产生构造叠加效应,形成弧形构造“中央强裂缝发育带”,是形成构造裂缝型油气藏的有利区域。     

冲断构造带深层变形的空间分布规律——以库车坳陷克拉苏构造带为例

传统上认为前陆冲断带内部的背斜构造具有"成排成带分段"的特征,在表观认识和宏观尺度上讲,容易理解这一特征,并且通过"成排成带分段"的解剖,直接为含油气区带评价和地震解释方案的落实提供指导作用。随着前陆冲断带深层结构的精细解剖和三维空间内构造变形的准确刻画,发现前陆冲断带深层构造变形的分布并非成排成带分段的特征,褶皱构造的发育与分布明显受前陆冲断构造位移量及各个断层位移量的大小所控制,各个断层控制的逆冲岩席在垂向上相互叠置、侧向上交叉对接、走向上错落有致, 3D立体空间内由多个次级弧形体组成鳞片状分布。本文以中国天然气勘探最为成功、勘探资料最为详实的库车坳陷克拉苏构造带为例,通过地震剖面精细构造解释,揭示出构造变形的运动学特征及其构造位移量在传播过程中的分异和转换,进而控制冲断带内部构造岩席的生长发育和空间展布特征,并在3D立体空间内揭示冲断岩席受构造位移量的控制而成鳞片状分布的规律,控制这一分布规律的主控因素是冲断构造位移量与冲断岩席长度之间定量的几何关系。这一认识提升了油气藏评价和构造圈闭描述的精度。     

中国中西部前陆冲断带构造演化及变形特征

前陆冲断带可以分为3种基本类型:弧后前陆型、周缘前陆型和再生前陆型冲断带。相对国外典型前陆冲断带,中国中西部前陆冲断带在构造演化和变形方面具有独特性,属于再生前陆型冲断带,普遍经历了两期逆冲构造变形、或者"伸展-挤压-伸展-挤压"多期构造变形的叠加。中国中西部的再生前陆冲断带多具有"分带、分段和分层"的结构特征,表现出以主干断裂为界往往可以划分为若干个冲断变形带,沿走向方向表现为几个在构造变形上具有明显差异的变形区段,在垂向上由于滑脱层的发育表现出不协调的分层收缩、上下叠置的变形特征。     

江南造山带北部早中生代岳阳—赤壁断褶带构造特征及变形机制研究

早中生代(晚印支-早燕山期)岳阳-赤壁断褶带位于江南造山带与中扬子前陆盆地交界地带.作者对该构造带进行了地表地质调查,以此为基础探讨了构造剖面结构及构造变形动力机制.岳阳-赤壁断褶带自南而北可分为岳阳-临湘基底滑脱-逆冲带,桃花泉-肖家湾盖层滑脱褶皱带,以及赤壁-嘉鱼前陆盆地断-褶-盆构造带.岳阳-临湘基底滑脱-逆冲带自南而北依次有郭镇向斜、官山背斜、临湘倒转向斜和聂市背斜,组成隔槽式褶皱组合.褶皱轴面多向南倾,褶皱变形面为南华系盖层与冷家溪群褶皱基底间的角度不整合面和顺界面的滑脱断裂面.桃花泉-肖家湾盖层滑脱褶皱带主要发育轴面南倾倒转褶皱,褶皱波长较小,卷入地层为南华系-志留系以及上石炭统-中三叠统沉积盖层.赤壁-嘉鱼前陆盆地断-褶-盆构造带以南倾蒲圻断裂(江南断裂)为南部边界,发育T3-J2前陆盆地沉积,带内褶皱与断裂卷入地层包括沉积盖层以及T3-J2地层:南部断裂与褶皱轴面南倾.北部轴面近直立.自南西至北东,研究区内构造线走向由EW向渐变为NEE-NE向.上述构造分带及变形特征反映出自南向北的运动指向,表明岳阳-赤壁断褶带具前陆冲断带构造性质.从断裂相关褶皱理论出发,以地表构造特征为依据,厘定了岳阳-赤壁地质剖面结构并进行了变形动力机制分析,认识如下:①自南而北、自下而上的多个滑脱层及其间的南倾逆断裂或断坡(主要为江南断裂)组成近似台阶状的逆冲断裂系统,从总体上控制了构造块体的滑移、逆冲以及相应的构造格架或变形分区.②郭镇向斜为基底滑脱褶皱,官山背斜具滑脱褶皱和断裂传播褶皱双重成因,聂市背斜为断裂转折褶皱;临湘向斜为受两侧背斜控制的被动向斜,由于弯滑褶皱作用在其两翼沿不整合界面形成滑脱断裂.③岳阳-临湘基底滑脱-逆冲带隔槽式褶皱的形成主要受控于褶皱基底的滑脱和基底整体的水平压缩,其形成机制类似于肿缩式褶皱.最后讨论认为湘东北-鄂东南地区不存在大规模、长距离的逆冲推覆构造.     

扎格罗斯褶皱冲断带构造变形特征

扎格罗斯褶皱冲断带是扎格罗斯碰撞造山带的前陆褶皱冲断带,也是波斯湾周缘前陆盆地的楔顶带,自北东到南西垂直于构造线方向可分为高扎格罗斯冲断带和扎格罗斯简单褶皱带;自北西到南东沿构造线方向可分为洛雷斯坦区(Lorestan)、迪兹富勒湾区(Dezful Embayment)和法尔斯区(Fars)。扎格罗斯褶皱冲断带的形成始于晚白垩世阿拉伯板块的洋壳向北俯冲到欧亚板块之下,褶皱冲断构造从北东部缝合带向南西方向伸展,并在上新世基本定型。本文选取了横切扎格罗斯褶皱冲断带的3条地质剖面和两条局部地震剖面进行构造变形分析。剖面分析显示研究区垂向上由一条大滑脱面将扎格罗斯褶皱冲断带剖面分为上、下两个构造层;褶皱冲断变形从北东到南西向由强变弱。研究区发育走滑、挤压和拉张3种构造变形,挤压构造变形占主导地位。挤压构造变形又包括滑脱褶皱、断展褶皱、断弯褶皱和双重构造等。     

The effect of basement step/topography on the geometry of the Zagros fold and thrust belt (SW Iran): an analog modeling approach

Systematic analog models are run to study the variation in deformation across basement steps in the Zagros fold-thrust belt. Our model results demonstrate that basement configuration/topography influences the sedimentation thickness and, hence, the kinematics and geometric evolution of the fold and thrust belt. The greater the difference in thickness between the adjacent cover units across a basement step, the sharper and clearer will be the offset of the deformation front. Based on model results, we conclude that in a fold-thrust belt, where basement step/topography is covered by a layer of ductile salt acting as a decollement, the effect of the salt decollement on the evolution of the belt is far greater than the effect of thickness variation of the cover units.     

Kinematic model for out-of-sequence thrusting: Motion of two ramp-flat faults and the production of upper plate duplex systems

Kinematic models developed here suggest a bewildering array of structural styles can be generated during out-of-sequence thrusting. Many of these structures would be difficult to distinguish from a normally stacked thrust sequence and the process can produce younger-on-older faults that could easily be misinterpreted as normal faults. This paper considers a small subset of this problem within a large model space by considering structures that develop along a pair of ramp-flat faults that are moving simultaneously, or sequentially. Motion on the lower ramp warps the structurally higher fault due to fault-bend folding and when the fault ruptures through the warp it transfers a horse to the upper hanging wall. Continuity of the process generates what is referred to here as an “upper plate duplex” to distinguish the structure from a conventional duplex. Kinematic parameters are developed for two models within this general problem: 1) a system with a fixed ramp in the lower thrust, overridden by an upper thrust; and 2) a double-duplex system where a conventional duplex develops along the lower fault at the same time as an upper plate duplex is formed along the upper fault. The theory is tested with forward models using 2D Move software and these tests indicate different families of structural styles form in association with relative scaling of ramp systems, slip-ratio between faults, and aspect ratios of horse blocks formed in the upper-plate duplex. A first-order result of the analysis is that an upper plate duplex can be virtually indistinguishable from a conventional duplex unless the trailing branch lines of the horses are exposed or imaged; a condition seldom met in natural exposures. Restoration of an upper-plate duplex produces counterintuitive fault geometry in the restored state, and thus, restorations of upper plate duplexes that erroneously assume a conventional duplex model would produce restored states that are seriously in error. In addition, in most of the models some fault segments place younger rocks on older rocks which could be easily misinterpreted as normal fault systems. In some models younger-on-older juxtapositions are significant and if scaled to crustal scale would produce core-complex style structures that would be difficult to recognize as contractional features. Collectively, these observations imply that many areas where simultaneous contraction and extension are inferred may be entirely contractional with younger-on-older relationships generated by out-of-sequence thrust systems. Examples where this process may have occurred are in southwestern North America and the Moine thrust system and future studies should evaluate these systems in light of these models. Distinguishing upper plate duplex from conventional duplex is potentially important in economic evaluations of thrust systems because fluid migration paths would be very different in the two alternatives. The process may also be important in seismogenic mechanisms, particularly in subduction megathrusts, because faults warping faults could produce fault irregularities that would form transient asperities along the fault.     

塔里木盆地主要山前带差异构造变形及对油气成藏的控制

塔里木盆地库车、塔西南和塔东南山前带在构造变形和活动强度等方面存在较大的差异性,这也决定了油气地质条件与油气分布的不均衡性。通过对3个山前带地质剖面的对比研究,结合对典型成藏模式的剖析,探讨山前带差异构造变形特征对油气成藏的控制作用。库车山前带以逆冲推覆及盐构造为主,构造圈闭规模大、幅度高;主要有盐下和盐上两种成藏模式,通源断裂十分发育,库姆格列木组膏盐岩对盐下油气的保存非常有利。塔西南山前带变形分段特征明显,包括三角带构造、双重逆冲、叠加背斜等,构造圈闭规模和完整性不如库车山前带;成藏模式也体现出分段差异,上白垩统-阿尔塔什组膏泥岩和普司格组泥岩的封闭效果较好,但运移路径复杂,先存油气易遭受后期调整和破坏。塔东南山前带具有一定构造分段性,若羌凹陷山前以冲断变形为主,远离山前的第二排背斜、断背斜圈闭具备基本的成藏条件;民丰凹陷山前以叠瓦逆冲和三角带构造为主,古近系膏泥岩封盖能力有限,深部逆冲断块及凹陷内部的低幅度背斜等是较现实的勘探目标。     

龙门山中段彭灌断裂带汶川Ms8.0地震同震破裂断层识别及其浅、表构造特征

2008年汶川Ms8.0地震在龙门山中段的彭灌断裂带产生的地表破裂,是该地震产生的第二大地表破裂带.综合应用地质、钻井以及二维、三维地震数据,利用横贯前山带的多条人工地震反射剖面,对彭灌断裂带产生同震破裂的断层进行准确识别和解释.研究表明,龙门山中段的彭灌断裂带是一套由3条主要断层和次级广泛发育的断裂组合构成,浅层表现...     

南大巴山前陆冲断带构造样式及变形机制分析

大巴山构造带位于秦岭造山带和四川盆地的过渡部位,形成于印支-燕山期,定型于喜山期。按照构造变形样式及其组合特征,从北东向南西可依次划分为北大巴山逆冲推覆构造带、南大巴山前陆褶皱-冲断带(又包括叠瓦断层带、断层-褶皱带和滑脱褶皱带等3个亚带)和四川盆地东北部低缓构造区等3个构造带(区)。南大巴山冲断带地表构造以类侏罗山式褶皱为显著特征,主要发育叠瓦断层系、断层相关褶皱、被动顶板双重构造、反冲断层系和冲起构造等变形样式。北东-南西向挤压应力和滑脱层是控制南大巴山及其前缘构造变形的主要因素,结合区域地质研究成果,建立了南大巴山及其前缘地区依次从震旦系-下寒武统-志留系-中下三叠统逐渐抬高的多层次滑脱前展模式。     

塔西南坳陷甫沙构造带正反转构造及其石油地质意义

塔西南坳陷甫沙构造带褶皱冲断强烈,古近系膏泥岩下层构造变形复杂,具有正反转构造变形特征。侏罗纪—白垩纪区域伸展环境发育大量正断层,后期在喜马拉雅运动中受挤压反转。南部发育高角度基底卷入正反转断层,中部发育叠瓦式逆冲断层,北部边缘变形微弱。相应地将甫沙构造带划分为反转断隆背斜带、楔状叠瓦构造带和逆冲前缘构造带;反转程度南强北弱、西强东弱。对区域构造变形环境的分析表明,西昆仑山隆升引发水平挤压叠加垂直向上的剪切作用,使先存高角度正断层容易被迁就利用进而发生正反转。对正反转相关构造圈闭评价认为:反转断隆背斜带发育的圈闭规模大,幅度低,埋藏浅,落实程度高,但上覆膏泥岩层薄,被断层破坏强烈,油气散失严重;楔状叠瓦构造带发育的圈闭规模小,幅度大,埋藏深,落实程度低,上覆膏泥岩层厚,有利于油气保存;逆冲前缘构造带发育低幅度隆起和地层岩性圈闭。     

不同组合形式叠瓦状逆断层地应力分布规律研究

叠瓦状逆断层是地壳中分布的主要断层组合形式之一。为了揭示地质演化过程中不同组合形式下叠瓦状逆断层间地应力分布规律,采用大型物理模拟手段,以龙门山地区的地质构造为背景,研究了两条平行叠瓦状逆断层和在其间与之相交的断层组合形式下地应力分布和变化规律。取得的主要认识如下:（1）对于研究区仅分布两条平行的叠瓦状逆断层,构造挤压方向与它们的走向垂直的情况,靠近构造挤压端的断层会首先发生失稳破坏,较大的局部应力释放会使地壳内部整体应力有所降低,但在下伏断层的深部会出现应力的突然升高;（2）对于研究区不仅分布两条平行的叠瓦状逆断层,而且在两条断裂之间存在一条与它们垂直的逆断层,构造挤压方向与叠瓦状逆断层垂直,叠瓦状逆断层附近浅层地应力变化较早,地壳易沿叠瓦状逆断层首先失稳活动,进而带动所夹逆断层的地应力发生调整;（3）对于研究区不仅分布两条平行的叠瓦状逆断层,在其间夹着走向与它们垂直的逆断层,构造挤压方向与叠瓦状逆断层斜交情况,地壳易沿所夹断层首先失稳活动,进而触发叠瓦状逆断层地应力变化;（4）仅存在叠瓦状逆断层,地应力分布较为均匀;叠瓦状逆断层间夹逆断层的情况下,在断层端部和几条断层交汇部位出现了应力集中现象。该问题的研究对区域稳定性评价和地震预测具有一定的指导意义。     

A Large-scale Tertiary Salt Nappe Complex in the Leading Edge of the Kuqa Foreland Fold-Thrust Belt, the Tarim Basin, Northwest China

The tectono-stratigraphic sequences of the Kuqa foreland fold-thrust belt in the northern Tarim basin, northwest China, can be divided into the Mesozoic sub-salt sequence, the Paleocene-Eocene salt sequence and the Oligocene-Quaternary supra-salt sequence. The salt sequence is composed mainly of light grey halite, gypsum, marl and brown elastics. A variety of salt-related structures have developed in the Kuqa foreland fold belt, in which the most fascinating structures are salt nappe complex. Based on field observation, seismic interpretation and drilling data, a large-scale salt nappe complex has been identified. It trends approximately east-west for over 200 km and occurs along the west Qiulitag Mountains. Its thrusting displacement is over 30 km. The salt nappe complex appears as an arcuate zone projecting southwestwards along the leading edge of the Kuqa foreland fold belt. The major thrust fault is developed along the Paleocene-Eocene salt beds. The allochthonous nappes comprise large north-dipping     

秦岭南缘大巴山褶皱－冲断推覆构造的特征

秦岭造山带南缘的大巴山巨型逆冲推覆构造主要是在秦岭造山带板块俯冲碰撞造山与中、新生代以来陆内造山过程中长期复合作用形成的。详细的室内外构造研究表明,巴山逆冲推覆构造可以巴山弧形断裂带为界划分为北大巴山逆冲推覆构造和南大巴山逆冲推覆构造。北大巴山自北而南依次由安康－武当推覆体、紫阳－平利推覆体、高桥－镇坪推覆体和高滩推覆体逆冲叠置而成。南大巴山则以镇巴－阳日断裂为界,分为北部的前陆冲断褶皱带和南部的前陆褶皱带。北大巴山主要是印支期碰撞造山作用和燕山期陆内逆冲推覆作用叠加改造的结果,南大巴山则主要是燕山期递进变形过程中的产物。构造变形北强南弱,北以冲断褶皱变形为特征,南以皱褶作用为主;北部褶皱紧闭复杂,向南渐变为宽缓的薄皮构造。逆冲作用在时序上具有由北向南扩展传递的特点。