Geology and fluid evolution of the Wangfeng orogenic-type gold deposit,Western Tian Shan,China

The Wangfeng gold deposit is located in Western Tian Shan and the central section of the Central Asian Orogenic Belt (CAOB). The deposit is mainly hosted in Precambrian metamorphic rocks and Caledonian granites and is structurally controlled by the Shenglidaban ductile shear zone. The gold orebodies consist of gold-bearing quartz veins and altered mylonite. The mineralization can be divided into three stages: quartz–pyrite veins in the early stage, sulfide–quartz veins in the middle stage, and quartz–carbonate veins or veinlets in the late stage. Ore minerals and native gold mainly formed in the middle stage. Four types of fluid inclusions were identified based on petrography and laser Raman spectroscopy: CO₂–H₂O inclusions (C-type), pure CO₂ inclusions (PC-type), NaCl–H₂O inclusions (W-type), and daughter mineral-bearing inclusions (S-type). The early-stage quartz contains only primary CO₂–H₂O fluid inclusions with salinities of 1.62 to 8.03 wt.% NaCl equivalent, bulk densities of 0.73 to 0.89 g/cm³, and homogenization temperatures of 256 °C–390 °C. Vapor bubbles are composed of CO₂. The middle-stage quartz contains all four types of fluid inclusions, of which the CO₂–H₂O and NaCl–H₂O types yield homogenization temperatures of 210 °C–340 °C and 230 °C–300 °C, respectively. The CO₂–H₂O fluid inclusions have salinities of 0.83 to 9.59 wt.% NaCl equivalent and bulk densities of 0.77 to 0.95 g/cm³, with vapor bubbles composed of CO₂, CH₄, and N₂. Fluid inclusions in the late-stage quartz are NaCl–H₂O solution with low salinities (0.35–3.87 wt.% NaCl equivalent) and low homogenization temperatures (122 °C–214 °C). The coexistence of inclusions of these four types in middle-stage quartz suggests that fluid boiling occurred in the middle-stage mineralization. Trapping pressures estimated from CO₂–H₂O inclusions are 110–300 MPa and 90–250 MPa for the early and middle stages, respectively, suggesting that gold mineralization mainly occurred at depths of about 10 km. In general, the Wangfeng gold deposit originated from a metamorphic fluid system characterized by low salinity, low density, and enrichment of CO₂. Depressurized fluid boiling caused gold precipitation. Given the regional geology, ore geology, fluid-inclusion features, and ore-forming age, the Wangfeng gold deposit can be classified as a hypozonal orogenic gold deposit.     

Fluid types and their genetic meaning for the BIF-hosted iron ores,Krivoy Rog,Ukraine

This paper contributes to the understanding of the genesis of epigenetic, hypogene BIF-hosted iron deposits situated in the eastern part of Ukrainian Shield. It presents new data from the Krivoy Rog iron mining district (Skelevatske–Magnetitove deposit, Frunze underground mine and Balka Severnaya Krasnaya outcrop) and focuses on the investigation of ore genesis through application of fluid inclusion petrography, microthermometry, Raman spectroscopy and baro-acoustic decrepitation of fluid inclusions. The study investigates inclusions preserved in quartz and magnetite associated with the low-grade iron ores (31–37% Fe) and iron-rich quartzites (38–45% Fe) of the Saksaganskaya Suite, as well as magnetite from the locally named high-grade iron ores (52–56% Fe). These high-grade ores resulted from alteration of iron quartzites in the Saksaganskiy thrust footwall (Saksaganskiy tectonic block) and were a precursor to supergene martite, high-grade ores (60–70% Fe). Based on the new data two stages of iron ore formation (metamorphic and metasomatic) are proposed.The metamorphic stage, resulting in formation of quartz veins within the low-grade iron ore and iron-rich quartzites, involved fluids of four different compositions: CO₂-rich, H₂O, H₂O–CO₂(± N₂–CH₄)–NaCl(± NaHCO₃) and H₂O–CO₂(± N₂–CH₄)–NaCl. The salinities of these fluids were relatively low (up to 7 mass% NaCl equiv.) as these fluids were derived from dehydration and decarbonation of the BIF rocks, however the origin of the nahcolite (NaHCO₃) remains unresolved. The minimum P–T conditions for the formation of these veins, inferred from microthermometry are T_min = 219–246 °C and P_min = 130–158 MPa. The baro-acoustic decrepitation analyses of magnetite bands indicated that the low-grade iron ore from the Skelevatske–Magnetitove deposit was metamorphosed at T = ~ 530 °C.The metasomatic stage post-dated and partially overlapped the metamorphic stage and led to the upgrade of iron quartzites to the high-grade iron ores. The genesis of these ores, which are located in the Saksaganskiy tectonic block (Saksaganskiy ore field), and the factors controlling iron ore-forming processes are highly controversial. According to the study of quartz-hosted fluid inclusions from the thrust zone the metasomatic stage involved at least three different episodes of the fluid flow, simultaneous with thrusting and deformation. During the 1^st episode three types of fluids were introduced: CO₂–CH₄–N₂(± C), CO₂(± N₂–CH₄) and low salinity H₂O–N₂–CH₄–NaCl (6.38–7.1 mass% NaCl equiv.). The 2^nd episode included expulsion of the aqueous fluids H₂O–N₂–CH₄–NaCl(± CO₂, ± C) of moderate salinities (15.22–16.76 mass% NaCl equiv.), whereas the 3^rd event involved high salinity fluids H₂O–NaCl(± C) (20–35 mass% NaCl equiv.). The fluids most probably interacted with country rocks (e.g. schists) supplying them with CH₄ and N₂. The high salinity fluids were most likely either magmatic–hydrothermal fluids derived from the Saksaganskiy igneous body or heated basinal brines, and they may have caused pervasive leaching of Fe from metavolcanic and/or the BIF rocks. The baro-acoustic decrepitation analyses of magnetite comprising the high-grade iron ore showed formation T = ~ 430–500 °C. The fluid inclusion data suggest that the upgrade to high-grade Fe ores might be a result of the Krivoy Rog BIF alteration by multiple flows of structurally controlled, metamorphic and magmatic–hydrothermal fluids or heated basinal brines.     

Some new data on the genesis of the Linghou Cu–Pb–Zn polymetallic deposit—Based on the study of fluid inclusions and C–H–O–S–Pb isotopes

The Linghou deposit, located near Hangzhou City of Zhejiang Province, eastern China, is a medium-sized polymetallic sulfide deposit associated with granitic intrusion. This deposit is structurally and lithologically controlled and commonly characterized by ore veins or irregular ore lenses. In this deposit, two mineralization events were identified, of which the former produced the Cu–Au–Ag orebodies, while the latter formed Pb–Zn–Cu orebodies. Silicification and calc-silicate (skarn type), phyllic, and carbonate alternation are four principal types of hydrothermal alteration. The early Cu–Au–Ag and late Pb–Zn–Cu mineralizations are characterized by quartz ± sericite + pyrite + chalcopyrite + bornite ± Au–Ag minerals ± magnetite ± molybdenite and calcite + dolomite + sphalerite + pyrite + chalcopyrite + galena, respectively. Calcite clusters and calcite ± quartz vein are formed during the late hydrothermal stage.The NaCl–H₂O–CO₂ system fluid, coexisting with NaCl–H₂O system fluid and showing the similar homogenization temperatures (385 °C and 356 °C, respectively) and different salinities (16.89–21.68 wt.% NaCl eqv. and 7.70–15.53 wt.% NaCl eqv.), suggests that fluid immiscibility occurred during the Cu–Au–Ag mineralization stage and might have given rise to the ore-metal precipitation. The ore-forming fluid of the Pb–Zn–Cu mineralization mainly belongs to the NaCl–H₂O–CO₂ system of high temperature (~ 401 °C) and mid-high salinity (10.79 wt.% NaCl eqv.).Fluids trapped in the quartz-chalcopyrite vein, Cu–Au–Ag ores, Pb–Zn–Cu ores and calcite clusters yielded δ¹⁸O_H2O and δD values varying from 5.54‰ to 13.11‰ and from − 71.8‰ to − 105.1‰, respectively, indicating that magmatic fluids may have played an important role in two mineralization events. The δ¹³C_PDB values of the calcite change from − 2.78‰ to − 4.63‰, indicating that the CO₃^2 − or CO₂ in the ore-forming fluid of the Pb–Zn–Cu mineralization was mainly sourced from the magmatic system, although dissolution of minor marine carbonate may have also occurred during the ore-forming processes. The sulfide minerals have homogeneous lead isotopic compositions with ²⁰⁶Pb/²⁰⁴Pb ranging from 17.958 to 18.587, ²⁰⁷Pb/²⁰⁴Pb ranging from 15.549 to 15.701, and ²⁰⁸Pb/²⁰⁴Pb ranging from 37.976 to 39.052, indicating that metallic elements of the Linghou deposit came from a mixed source involving mantle and crustal components.Based on geological evidence, fluid inclusions, and H–O–C–S–Pb isotopic data, the Linghou polymetallic deposit is interpreted as a high-temperature, skarn-carbonate replacement type. Two types of mineralization are both related to the magmatic–hydrothermal system, with the Cu–Au–Ag mineralization having a close relationship with granodiorite.     

Timing and mechanism of gold mineralization at the Wang'ershan gold deposit,Jiaodong Peninsula,eastern China

The Wang'ershan gold deposit, located in the southern Jiaojia goldfield, is currently the largest gold deposit hosted within the subsidiary faults in Jiaodong Peninsula, with a gold reserve of > 60 t gold at a grade of 4.07 g/t Au. It is hosted in the Late Jurassic Linglong biotite granites and controlled by the second-order, N- to NNE-trending Wang'ershan Fault (and its subsidiary faults) which is broadly parallel to the first-order Jiaojia Fault in the goldfield. Gold mineralization occurs as both disseminated- and stockwork-style and quartz–sulfide vein-style ores, mainly within altered cataclasites and breccias, and sericite–quartz and potassic alteration zones, respectively. Mineralization stages can be divided into (1) the pyrite–quartz–sericite stage, (2) the quartz–pyrite stage, (3) the quartz–sulfide stage, and (4) the quartz–carbonate stage.Two sericite samples associated with the main ore-stage pyrites from pyritic phyllic ores of the deposit with weighted mean plateau ⁴⁰Ar/³⁹Ar age of 120.7 ± 0.6 Ma and 119.2 ± 0.5 Ma, respectively, were selected for ⁴⁰Ar/³⁹Ar geochronology. On the basis of petrography and microthermometry, three types of primary fluid inclusions related to the ore forming event were identified: type 1 H₂O–CO₂–NaCl, type 2 aqueous, and type 3 CO₂ fluid inclusions (in decreasing abundance). Stage 1 quartz contains all three primary fluid inclusions, while stages 2 and 3 quartz contain both type 1 and 2 inclusions, and stage 4 quartz contains only type 2 inclusions. The contemporaneous trapping, similar salinities and total homogenization temperature ranges, and different homogenization phases of type 1 and type 2 inclusions indicate that fluid immiscibility did take place in stages 1, 2 and 3 ores, with P–T conditions of 190 to 85 MPa and 334 to 300 °C for stage 1 and 200 to 40 MPa and 288 to 230 °C for stages 2 and 3. Combined with the H–O–C–S–Pb isotopic compositions, ore-forming fluids may have a metamorphic-dominant mixed source, which could be associated with the dehydration and decarbonisation of a subducting paleo-Pacific plate and characterized by medium–high temperature (285–350 °C), CO₂-bearing (~ 8 mol%) with minor CH₄ (1–4% in carbonic phase), and low salinity (3.38–8.45 eq. wt.% NaCl). During mineralization, the fluid finally evolved into a medium–low temperature NaCl–H₂O system. Au(HS)₂⁻ was the most probable gold-transporting complex at Wang'ershan, due to the low temperature (157–350 °C) and near-neutral to weakly acidic ore fluids. The reaction between gold-bearing fluids and iron-bearing wall-rocks, and fluid-immiscibility processes caused via fluid–pressure cycling during seismic movement along fault zones that host lode-gold orebodies, which led to breakdown of Au(HS)₂⁻, are interpreted as the two main precipitation mechanisms of gold deposition.In general, the Wang'ershan deposit and other deposits in the Jiaojia camp have concordant structural system and wall-rock alteration assemblages, nature of orebodies and gold occurrence conditions, as well as the similar geochronology, ore-forming fluids system and stable isotope compositions. Thus gold mineralization in the Jiaojia goldfield was a large-scale unified event, with consistent timing, origin, process and mechanism.     

Isotope and fluid inclusion geochemistry and genesis of the Qiangma gold deposit,Xiaoqinling gold field,Qinling Orogen,China

The Qiangma gold deposit is hosted in the > 1.9 Ga Taihua Supergroup metamorphic rocks in the Xiaoqinling terrane, Qinling Orogen, on the southern margin of the North China Craton. The mineralization can be divided as follows: quartz-pyrite veins early, quartz-polymetallic sulfide veinlets middle, and carbonate-quartz veinlets late stages, with gold being mainly introduced in the middle stage. Three types of fluid inclusions were identified based on petrography and laser Raman spectroscopy, i.e., pure carbonic, carbonic-aqueous (CO₂–H₂O) and aqueous inclusions.The early-stage quartz contains pure carbonic and CO₂–H₂O inclusions with salinities up to 12.7 wt.% NaCl equiv., bulk densities of 0.67 to 0.86 g/cm³, and homogenization temperatures of 280−365 °C. The early-stage is related to H₂O–CO₂ ± N₂ ± CH₄ fluids with isotopic signatures consistent with a metamorphic origin (δ¹⁸O_water = 3.1 to 5.2‰, δD = − 37 to − 73‰). The middle-stage quartz contains all three types of fluid inclusions, of which the CO₂–H₂O and aqueous inclusions yield homogenization temperatures of 249−346 °C and 230−345 °C, respectively. The CO₂–H₂O inclusions have salinities up to 10.9 wt.% NaCl equiv. and bulk densities of 0.70 to 0.98 g/cm³, with vapor bubbles composed of CO₂ and N₂. The isotopic ratios (δ¹⁸O_water = 2.2 to 3.6‰, δD = − 47 to − 79‰) suggest that the middle-stage fluids were mixed by metamorphic and meteoric fluids. In the late-stage quartz only the aqueous inclusions are observed, which have low salinities (0.9−9.9 wt.% NaCl equiv.) and low homogenization temperatures (145−223 °C). The isotopic composition (δ¹⁸O_water = − 1.9 to 0.5‰, δD = − 55 to − 66‰) indicates the late-stage fluids were mainly meteoric water.Trapping pressures estimated from CO₂–H₂O inclusions are 100−285 MPa for the middle stage, suggesting that gold mineralization mainly occurred at depths of 10 km. Fluid boiling and mixing caused rapid precipitation of sulfides and native Au. Through boiling and inflow of meteoric water, the ore-forming fluid system evolved from CO₂-rich to CO₂-poor in composition, and from metamorphic to meteoric, as indicated by decreasing δ¹⁸O_water values from early to late. The carbon, sulfur and lead isotope compositions suggest the hostrocks within the Taihua Supergroup to be a significant source of ore metals. Integrating the data obtained from the studies including regional geology, ore geology, and fluid inclusion and C–H–O–S–Pb isotope geochemistry, we conclude that the Qiangma gold deposit was an orogenic-type system formed in the tectonic transition from compression to extension during the Jurassic−Early Cretaceous continental collision between the North China and Yangtze cratons.     

Geology,geochemistry and ore genesis of the Wenyu gold deposit,Xiaoqinling gold field,Qinling Orogen,southern margin of North China Craton

The Wenyu giant gold deposit is hosted in the Precambrian Taihua Supergroup metamorphic rocks within the Xiaoqinling terrane (Qinling Orogen), on the southern margin of the North China Craton. The mineralization can be divided into three stages: quartz–pyrite veins early, quartz–sulfide veins middle (main), and carbonate–quartz veinlets late, with gold being mainly introduced in main stage. Quartz formed in two earlier stages contains three compositional types of fluid inclusions, i.e. pure CO₂, CO₂–H₂O and NaCl–H₂O, but the late-stage minerals only contain the NaCl–H₂O inclusions. The inclusions in quartz formed in the early, main and late stages yield total homogenization temperatures of 262–417 °C, 236–407 °C and 114–239 °C, respectively, with salinities no higher than 13 wt.% NaCl equiv. Trapping pressures estimated from CO₂–H₂O inclusions are 139–399 MPa and 111–316 MPa in the early and main stages, corresponding to mineralization depths of 14 km and 11 km, respectively. Fluid boiling and mixing caused rapid precipitation of sulfides and native Au. Through boiling and inflow of meteoric water, the ore-forming fluid system evolved from CO₂-rich to CO₂-poor in composition, and from metamorphic to meteoric, as indicated by decreasing δ¹⁸O_water values from early to late. The carbon, sulfur and lead isotope compositions suggest the hostrocks within the Taihua Supergroup to be a significant source of ore metals. Integrating the data obtained from the studies including regional geology, ore geology, fluid inclusion and C–H–O–S–Pb isotope geochemistry, we conclude that the Wenyu gold deposit was an orogenic-type system formed in the tectonic transition from compression to extension during the Jurassic–Early Cretaceous continental collision between the North China and Yangtze Cratons.     

Listvenite–lode association at the Barramiya gold mine,Eastern Desert,Egypt

Several occurrences of gold-bearing quartz veins are situated along the east–northeast-trending Barramiya–Um Salatit ophiolitic belt in the central Eastern Desert of Egypt. In the Barramiya mine, gold mineralization within carbonaceous, listvenized serpentinite and adjacent to post-tectonic granite stocks points toward a significant role of listvenitization in the ore genesis. The mineralization is related to quartz and quartz–carbonate lodes in silicified/carbonatized wallrocks. Ore minerals, disseminated in the quartz veins and adjacent wallrocks are mainly arsenopyrite, pyrite and trace amounts of chalcopyrite, sphalerite, tetrahedrite, pyrrhotite, galena, gersdorffite and gold. Partial to complete replacement of arsenopyrite by pyrite and/or marcasite is common. Other secondary phases include covellite and goethite. Native gold and gold–silver alloy occur as tiny grains along micro-fractures in the quartz veins. However, the bulk mineralization can be attributed to auriferous arsenopyrite and arsenic-bearing pyrite (with hundreds of ppms of refractory Au), as evident by electron microprobe and LA-ICP-MS analyses.The mineralized quartz veins are characterized by abundant carbonic (CO₂ ± CH₄ ± H₂O) and aqueous-carbonic (H₂O–NaCl–CO₂ ± CH₄) inclusions along intragranular trails, whereas aqueous inclusions (H₂O–NaCl ± CO₂) are common in secondary sites. Based on the fluid inclusions data combined with thermometry of the auriferous arsenopyrite, the pressure–temperature conditions of the Barramiya gold mineralization range from 1.3 to 2.4 kbar at 325–370 °C, consistent with mesothermal conditions. Based on the measured δ³⁴S values of pyrite and arsenopyrite intimately associated with gold, the calculated δ³⁴S_Σs values suggest that circulating magmatic, dilute aqueous-carbonic fluids leached gold and isotopically light sulfur from the ophiolitic sequence. As the ore fluids infiltrated into the sheared listvenite rocks, a sharp decrease in the fluid fO₂ via interaction with the carbonaceous wallrocks triggered gold deposition in structurally favorable sites.     

P–T conditions of mineralization in the Jonnagiri granitoid-hosted gold deposit,eastern Dharwar Craton,southern India: Constraints from fluid inclusions and chlorite thermometry

Gold mineralization at Jonnagiri, Dharwar Craton, southern India, is hosted in laminated quartz veins within sheared granodiorite that occur with other rock units, typical of Archean greenstone–granite ensembles. The proximal alteration assemblage comprises of muscovite, plagioclase, and chlorite with minor biotite (and carbonate), which is distinctive of low- to mid-greenschist facies. The laminated quartz veins that constitute the inner alteration zone, contain muscovite, chlorite, albite and calcite. Using various calibrations, chlorite compositions in the inner and proximal zones yielded comparable temperature ranges of 263 to 323 °C and 268 to 324 °C, respectively. Gold occurs in the laminated quartz veins both as free-milling native metal and enclosed within sulfides. Fluid inclusion microthermometry and Raman spectroscopy in quartz veins within the sheared granodiorite in the proximal zone and laminated auriferous quartz veins in inner zone reveal the existence of a metamorphogenic aqueous–gaseous (H₂O–CO₂–CH₄ + salt) fluid that underwent phase separation and gave rise to gaseous (CO₂–CH₄), low saline (~ 5 wt.% NaCl equiv.) aqueous fluids. Quartz veins within the mylonitized granodiorites and the laminated veins show broad similarity in fluid compositions and P–T regime. Although the estimated P–T range (1.39 to 2.57 kbar at 263 to 323 °C) compare well with the published P–T values of other orogenic gold deposits in general, considerable pressure fluctuation characterize gold mineralization at Jonnagiri. Factors such as fluid phase separation and fluid–rock interaction, along with a decrease in f(O₂), were collectively responsible for gold precipitation, from an initial low-saline metamorphogenic fluid. Comparison of the Jonnagiri ore fluid with other lode gold deposits in the Dharwar Craton and major granitoid-hosted gold deposits in Australia and Canada confirms that fluids of low saline aqueous–carbonic composition with metamorphic parentage played the most dominant role in the formation of the Archean lode gold systems.     

Ore-forming process of the Huijiabao gold district,southwestern Guizhou Province,China: Evidence from fluid inclusions and stable isotopes

The Huijiabao gold district is one of the major producers for Carlin-type gold deposits in southwestern Guizhou Province, China, including Taipingdong, Zimudang, Shuiyindong, Bojitian and other gold deposits/occurrences. Petrographic observation, microthermometric study and Laser Raman spectroscopy were carried out on the fluid inclusions within representative minerals in various mineralization stages from these four gold deposits. Five types of fluid inclusions have been recognized in hydrothermal minerals of different ore-forming stages: aqueous inclusions, CO₂ inclusions, CO₂–H₂O inclusions, hydrocarbon inclusions, and hydrocarbon–H₂O inclusions. The ore-forming fluids are characterized by a H₂O + CO₂ + CH₄ ± N₂ system with medium to low temperature and low salinity. From early mineralization stage to later ones, the compositions of the ore-forming fluids experienced an evolution of H₂O + NaCl → H₂O + NaCl + CO₂ + CH₄ ± N₂ → H₂O + NaCl ± CH₄ ± CO₂ with a slight decrease in homogenization temperature and salinity. The δ¹⁸O values of the main-stage quartz vary from 15.2‰ to 24.1‰, while the δD_H2O and calculated δ¹⁸O_H2O values of the ore-forming fluids range from −56.9 to −116.3‰ and from 2.12‰ to 12.7‰, respectively. The δ¹³C_PDB and δ¹⁸O_SMOW values of hydrothermal calcite change in the range of −9.1‰ to −0.5‰ and 11.1–23.2‰, respectively. Stable isotopic characteristics indicate that the ore-forming fluid was mainly composed of ore- and hydrocarbon-bearing basinal fluid. The dynamic fractionation of the sulfur in the diagenetic pyrite is controlled by bacterial reduction of marine sulfates. The hydrothermal sulfides and the diagenetic pyrite from the host rocks are very similar in their sulfur isotopic composition, suggesting that the sulfur in the ore-forming fluids was mainly derived from dissolution of diagenetic pyrite. The study of fluid inclusions indicates that immiscibility of H₂O–NaCl–CO₂ fluids took place during the main mineralization stage and caused the precipitation and enrichment of gold.     

Geology and fluid characteristics of the Ulu Sokor gold deposit,Kelantan, Malaysia: Implications for ore genesis and classification of the deposit

The Ulu Sokor gold deposit is one of the most famous and largest gold deposits in Malaysia and is located in the Central Gold Belt. This deposit consists of three major orebodies that are related to NS- and NE-striking fractures within fault zones in Permian-Triassic meta-sedimentary and volcanic rocks of the East Malaya Block. The faulting events represent different episodes that are related to each orebody and are correlated well with the mineralogy and paragenesis. The gold mineralization consists of quartz-dominant vein systems with sulfides and carbonates. The hydrothermal alteration and mineralization occurred during three stages that were characterized by (I) silicification and brecciation; (II) carbonatization, sericitization, and chloritization; and (III) quartz–carbonate veins.Fluid inclusions in the hydrothermal quartz and calcite of the three stages were studied. The primary CO₂–CH₄–H₂O–NaCl fluid inclusions in stage I are mostly related to gold mineralization and display homogenization temperatures of 269–389 °C, salinities of 2.77–11.89 wt.% NaCl equivalent, variable CO₂ contents (typically 5–29 mol%), and up to 15 mol% CH₄. In stage II, gold was deposited at 235–398 °C from a CO₂ ± CH₄–H₂O–NaCl fluid with a salinity of 0.83–9.28 wt.% NaCl equivalent, variable CO₂ contents (typically 5–63 mol%), and up to 4 mol% CH₄. The δ¹⁸O_H2O and δD values of the ore-forming fluids from the stage II quartz veins are 4.5 to 4.8‰ and − 44 to − 42‰, respectively, and indicate a metamorphic–hydrothermal origin. Oxygen fugacities calculated for the entire range of T-P-X_CO2 conditions yielded log f_O2 values between − 28.95 and − 36.73 for stage I and between − 28.32 and − 39.18 for stage II. These values indicate reduced conditions for these fluids, which are consistent with the mineral paragenesis, fluid inclusion compositions, and isotope values.The presence of daughter mineral-bearing aqueous inclusions is interpreted to be a magmatic signature of stage IIIa. Combined with the oxygen and hydrogen isotopic compositions (δ¹⁸O_H2O = 6.8 to 11.9‰, δD = − 77 to − 62‰), these inclusions indicate that the initial fluid was likely derived from a magmatic source. In stage IIIb, the gold was deposited at 263° to 347 °C from a CO₂–CH₄–H₂O–NaCl fluid with a salinity of 5.33 to 11.05 wt.% NaCl equivalent, variable CO₂ contents (typically 9–15 mol%), and little CH₄. The oxygen and hydrogen isotopic compositions of this fluid (δ¹⁸O_H2O = 8.1 to 8.8‰, δD = − 44 to − 32‰) indicate that it was mainly derived from a metamorphic–hydrothermal source. The CO₂–H₂O ± CH₄–NaCl fluids that were responsible for gold deposition in the stage IIIc veins had a wide range of temperatures (214–483 °C), salinities of 1.02 to 21.34 wt.% NaCl equivalent, variable CO₂ contents (typically 4–53 mol%), and up to 7 mol% CH₄. The oxygen and hydrogen isotopic compositions (δ¹⁸O_H2O = 8.5 to 9.8‰, δD = − 70 to − 58‰) were probably acquired at the site of deposition by mixing of the metamorphic–hydrothermal fluid with deep-seated magmatic water and then evolved by degassing at the site of deposition during mineralization. The log f_O2 values from − 28.26 to − 35.51 also indicate reduced conditions for this fluid in stage IIIc. Moreover, this fluid had a near-neutral pH and δ³⁴S values of H₂S of − 2.32 to 0.83‰, which may reflect the derivation of sulfur from the subducted oceanic lithospheric materials.The three orebodies represent different gold transportation and precipitation models, and the conditions of ore formation are related to distinct events of hydrothermal alteration and gold mineralization. The gold mineralization of the Ulu Sokor deposit occurred in response to complex and concurrent processes involving fluid immiscibility, fluid–rock reactions, and fluid mixing. However, fluid immiscibility was the most important mechanism for gold deposition and occurred in these orebodies, which have corresponding fluid properties, structural controls, geologic characteristics, tectonic settings, and origins of the ore-forming matter. These characteristics of the Ulu Sokor deposit are consistent with its classification as an orogenic gold deposit, while some of the veins are genetically related to intrusions.     

Fluid inclusion geochemistry and 40Ar/39Ar geochronology constraints on the genesis of the Jianchaling Au deposit,China

The giant Jianchaling gold deposit is located in the Shaanxi Province, China. The mineralization is hosted by WNW-trending faults in the Mianxian-Lueyang-Yangpingguan (MLY) area. The mineralization can be divided into three stages based on mineralogical assemblages and crosscutting relationships of mineralized quartz veins. These stages, from early to late, are characterized by the mineral assemblage of: (1) quartz – coarse-grained pyrite – pyrrhotite – pentlandite – dolomite; (2) quartz – pyrite – gold – sphalerite – galena – carbonate – arsenopyrite – fuchsite; and (3) dolomite – calcite – quartz – fine-grained pyrite – realgar – orpiment.Three types of fluid inclusions have been recognized in this study based on petrographic and microthermometric measurements, including pure CO₂ and/or CH₄ (PC-type), NaCl-H₂O (W-type), and NaCl-CO₂-H₂O (C-type) fluid inclusions. These fluid inclusion types are present in quartz from the Stage 1 and 2 assemblages, whereas the Stage 3 quartz only contains W-type fluid inclusions. The Stage 2 assemblage is associated with the mineralization at the Jianchaling deposit. Fluid inclusions of Stage 1 quartz homogenize mainly between 250° and 360 °C, with salinities up to 15.6 wt.% NaCl equiv., whereas the Stage 3 dolomite with homogenization temperatures of 160° – 220 °C and salinities of 1.1–7.4 wt.% NaCl equiv. This indicates that the ore fluid system evolved from CO₂-rich, probably metamorphic hydrothermal to CO₂-poor, meteoric fluid. All three types of fluid inclusions can be observed in the Stage 2 quartz, suggesting that this heterogeneous association was trapped from a boiling fluid system. These inclusions homogenized at temperatures of 200°–250 °C and salinities of 1.2–12.4 wt.% NaCl equiv. The estimated trapping pressures of the fluid inclusions are between 117 and 354 MPa in Stage 1, suggesting an alternating lithostatic–hydrostatic fluid system, which was controlled by a fault-valve at the depth of ~ 12 km.Two fuchsite samples collected from the Stage 2 polymetallic-quartz veins yielded well-defined ⁴⁰Ar/³⁹Ar isotopic plateau ages of 197 ± 2 and 194 ± 2 Ma, and ³⁹Ar/³⁶Ar-⁴⁰Ar/³⁶Ar normal isochrones of 198 ± 2 and 199 ± 2 Ma. This indicates that the mineralization at Jianchaling is Early Jurassic (ca. 198 Ma) in age. We propose that Jianchaling is an orogenic gold deposit, and formed during continental collision related to the northward subduction of the Mian-Lue oceanic plate during the Early Jurassic. We also conclude that the beginning of the continental collision between the Yangtze and the North China Cratons took place around 200 Ma.     

Structural evolution of the Mokrsko-West,Mokrsko-East and Čelina gold deposits,Bohemian Massif,Czech Republic: Role of fluid overpressure

The studied Mokrsko-West (90–100 t Au), Mokrsko-East (30 t Au) and Čelina (11 t Au) deposits represent three spatially and genetically interrelated deposits of supposed affiliation to the intrusion-related gold deposit type. The deposits differ in their dominant host rocks, which are represented by ca 354 Ma old biotite tonalite (Mokrsko-West) and Neoproterozoic volcanic and volcanosedimentary rocks (Mokrsko-East, Čelina). Another difference lies in the style of veining — densely spaced networks of 0.1–5 mm thin veins (Q₂) within the tonalite, compared to thick (usually 5–20 cm; Q_1–2) and widely spaced veins within the Neoproterozoic rocks.Five generations of quartz veins, referred to as Q₀ through Q₄ were distinguished: Q₀ veins are the oldest and ore-barren, Q₁ veins mark the onset of the Au-ore formation, Q₂ veins its culmination and Q₃ veins its fading. Late quartz gangue (Q₄) is associated with uneconomic Ag–Pb–Zn vein-type ores hosted by calcite–barite–(quartz) veins.Quartz vein thickness (~ 0.3 to ~ 300 mm), spacing (~ 3 mm to ~ 500 mm), distribution, and related extensional strain (ca. 3–25%) evolve systematically across the studied ore district, reflecting both the major host rock and other tectonic factors. Detailed study of vein dimension parameters (thickness, length, width, aspect ratios) allowed estimation of the probable depth of the fluid source reservoir (~ 2 km or ~ 4 km) below the present surface. The depth to the fluid source seems to increase through time, being the shallowest for the Q₀ veins and the deepest for the Q₂ veins. Two independent methods of estimating fluid overpressure are discussed in the paper. Fluid overpressure during vein formation decreases from the Q₀ through the Q₂ veins, from 10 to 4 MPa or from 26 to 10 MPa, depending on the assumed tensile strength of the tonalite (5.5 and 15 MPa, respectively).The origin of joints and veins is discussed in terms of the stress orientation and crack-seal and crack-jump mechanisms. Field relationships unambiguously indicate that the veins hosted by Neoproterozoic rocks originated by reopening of the pre-existing extension joints (J₁) due to fluid overpressure. The origin of the densely-spaced thin veins (Q₂) hosted by the tonalite at the Mokrsko-West deposit is, however, less certain. It is probable that the tonalite was already affected by microfracturing analogous to the J₁ joints prior to the formation of quartz veins.The formation of the Q_1–2 veins at the Mokrsko-East deposit was constrained by the Re–Os dating of molybdenite to 342.9 ± 1.4 Ma. The ore-bearing hydrothermal system is thus ca 12 Ma younger than the tonalite that hosts the Mokrsko-West deposit. A similar ca 15–2 Ma difference between the age of the host-intrusion and the age of the hydrothermal event was encountered in several other gold deposits in the vicinity of the Central Bohemian Plutonic Complex. Two hypotheses to explain this are discussed in the paper.     

Geology,geochronology and fluid characteristics of the Pingqiu gold deposit,Southeastern Guizhou Province,China

The junction of the southeastern Guizhou, the southwestern Hunan, and the northern Guangxi regions is located within the southwestern Jiangnan orogen and forms a NE-trending ∼250 km gold belt containing more than 100 gold deposits and occurrences. The Pingqiu gold deposit is one of the numerous lode gold deposits in the southeastern Guizhou district. Gold mineralization is hosted in Neoproterozoic lower greenschist facies metamorphic rocks and controlled by fold-related structures. Vein types present at Pingqiu include bedding-parallel and discordant types, with saddle-reefs and their down limb extensions dominating but with lesser discordant types. The major sulfide minerals are arsenopyrite and pyrite, with minor sphalerite, galena, chalcopyrite, and rare pyrrhotite, marcasite, and tetrahedrite. Much of the gold is μm- to mm-sized grains, and occurs as fracture-controlled isolated grains or filaments in quartz, galena, sphalerite, pyrite, and wallrock.Three types of fluid inclusions are distinguished in hydrothermal minerals. Type 1 aqueous inclusions have homogenization temperatures of 171–396 °C and salinities of 1.4–9.8 wt% NaCl equiv. Type 2 aqueous-carbonic inclusions yield final homogenization temperatures of 187–350 °C, with salinities of 0.2–7.7 wt% NaCl equiv. Type 3 inclusions are carbonic inclusions with variable relative content of CO₂ and CH₄, and minor amounts of N₂ and H₂O. The close association of CO₂-rich inclusions and H₂O-rich inclusions in groups and along the same trail suggests the presence of fluid immiscibility. The calculated δ¹⁸O_H2O values range from 4.3‰ to 8.3‰ and δD_H2O values of fluid inclusions vary from −55.8‰ to −46.9‰. A metamorphic origin is preferred on the basis of geological background and analogies with other similar deposit types.Two ore-related sericite samples yield well-defined ⁴⁰Ar/³⁹Ar plateau ages of 425.7 ± 1.7 Ma and 425.2 ± 1.3 Ma, respectively. These data overlap the duration of the Caledonian gold mineralization along the Jiangnan orogen, and suggest that gold mineralization was post-peak regional metamorphism and occurred during the later stages of the Caledonian orogeny.Overall, the Pingqiu gold deposit displays many of the principal characteristics of the Bendigo gold mines in the western Lachlan Orogen (SE Australia) and the Dufferin gold deposit in the Meguma Terrane (Nova Scotia, Canada) but also some important differences, which may lead to the disparity in gold endowment. However, the structural make-up at deposit scale, and the shallow mining depth at present indicate that the Pingqiu gold deposit may have considerable gold potential at depth.     

The Inata deposit,Belahouro District,northern Burkina Faso

The Inata gold deposit is hosted in the Bouroum greenstone belt of northern Burkina Faso and contains ca. 5 Moz of gold resource. The greenstone belt is divided into 4 distinct domains: The Pali West, Pali-Minfo and Fété Kolé domains comprised of variable proportions of mafic to intermediated volcanic, volcaniclastic and sedimentary rocks, and the Sona Basin comprised of feldspathic sandstones and turbidites. Potential Tarkwaian-like conglomerates are rarely observed on the eastern margin of the basin. The stratigraphy is crosscut by a series of intrusions between 2172 ± 15 Ma and 2122 ± 4 Ma. A complex deformation sequence is recorded in the rocks and has been interpreted in a five stage scheme: early syn-depositional basin margin faults reactivated through time and partitioning all subsequent regional deformation (De_B); N–S compression (D1_B > 2172 Ma); E-W compression (D2_B, < ca 2122 Ma); NW–SE compression (D3_B), and a late N–S compression (D4_B). D2_B-D4_B overprint all rocks, including those of the Sona Basin and Tarkwaian-like conglomerates. Peak metamorphism is mid- to upper-greenschist facies.Mineralisation at Inata is hosted in black shales and volcaniclastic rocks of the Pali-Minfo domain and comprises shear-zone hosted quartz-tourmaline-ankerite veins with associated sulphides dominated by pyrite and arsenopyrite. Three generations of pyrite (py1, py2, py3) and one generation of arsenopyrite (apy2) have been identified. Py1 is parallel to bedding and early D1_B foliation and not associated with gold. Py2 and apy2 are coeval, contain up to 1 ppm gold and are spatially associated with auriferous quartz veins. Py3 locally overprints previous assemblages and is also associated with Au. Fluid inclusions in quartz indicate H₂O to H₂O–CO₂–NaCl fluids in auriferous quartz veins.Microscopic to macroscopic observation of fabric-mineral-vein crosscutting relationships indicate that mineralisation is syn-D2_B, disrupted and remobilised during D3_B. All observations and data are consistent with Inata representing an orogenic style of gold mineralisation formed relatively late in the evolution of the host terrane.     

Hydrothermal alteration and ore-forming fluids associated with gold-tellurium mineralization in the Dongping gold deposit,China

The Dongping gold deposit hosted in syenites is one of the largest hydrothermal gold deposits in China and composed of ore veins in the upper parts and altered zones in the lower parts of the ore bodies. Pervasive potassic alteration and silicification overprint the wall rocks of the ore deposit. The alteration minerals include orthoclase, microcline, perthite, quartz, sericite, epidote, calcite, hematite and pyrite, with the quartz, pyrite and hematite assemblages closely associated with gold mineralization. The phases of hydrothermal alteration include: (i) potassic alteration, (ii) potassic alteration - silicification, (iii) silicification - epidotization - hematitization, (iv) silicification - sericitization - pyritization and (v) carbonation. Mass-balance calculations in potassic altered and silicified rocks reveal the gain of K₂O, Na₂O, SiO₂, HFSEs and transition elements (TEs) and the loss of REEs. Most major elements were affected by intense mineral reactions, and the REE patterns of the ore are consistent with those of the syenites. Gold, silver and tellurium show positive correlation and close association with silicification. Fluid inclusion homogenization temperatures in quartz veins range from 154 °C to 382 °C (peak at 275 °C–325 °C), with salinities of 4–9 wt.% NaCl equiv. At temperatures of 325 °C the fluid is estimated to have pH = 3.70–5.86, log fO₂ = − 32.4 to − 28.1, with Au and Te transported as Au (HS)₂⁻ and Te₂^2 − complexes. The ore forming fluids evolved from high pH and fO₂ at moderate temperatures into moderate-low pH, low fO₂ and low temperature conditions. The fineness of the precipitated native gold and the contents of the oxide minerals (e.g., magnetite and hematite) decreased, followed by precipitation of Au- and Ag-bearing tellurides. The hydrothermal system was derived from an alkaline magma and the deposit is defined as an alkaline rock-hosted hydrothermal gold deposit.     

Listvenite-related gold deposits of the South Urals (Russia): A review

The Urals is a complex fold belt, which underwent long geological evolution. The formation of most gold deposits in the Urals is related to the collision stage. In this paper, we review some relatively small listvenite-related gold deposits, which are confined to the large Main Uralian fault zone and some smaller faults within the Magnitogorsk zone. The Mechnikovskoe, Altyn-Tash, and Ganeevskoe deposits are studied in detail in this contribution. They comprise the ore clusters along with other numerous small gold deposits, and constituted the sources for the gold placers exploited in historical time. The gold is hosted by metasomatites (listvenites, beresites) and quartz veins with economic gold grades (up to 20 g/t Au). Listvenites are developed after serpentinites and composed of quartz, fuchsite, and carbonates (magnesite, dolomite) ± albite. Volcanic and volcanoclastic rocks are altered to beresites, consisting of sericite, carbonates (dolomite, ankerite), quartz and albite. Pyrite and chalcopyrite are major ore minerals associated with gold; pyrrhotite, Ni sulfides, galena, sphalerite, arsenopyrite and Au-Ag tellurides are subordinate and rare. Gold in these deposits is mostly high-fineness (>900‰). The lower fineness (∼800‰) is typical of gold in assemblage with polymetallic sulfides and tellurides. The ores have been formed from the NaCl–CO₂–H₂O ± CH₄ fluids of low (∼2 wt% NaCl-equiv.) to moderate (8–16 wt% NaCl-equiv.) salinity at temperatures of 210–330 °C. The oxygen isotopic composition of quartz (δ¹⁸O) varies from 14.7 to 15.4‰ (Mechnikovskoe deposit), 13.2 to 13.6‰ (Altyn-Tash deposit) and 12.0 to 12.7‰ (Ganeevskoe deposit). The oxygen isotopic composition of albite from altered rocks of the Ganeevskoe deposit is 10.1‰. The calculated δ¹⁸O_H2O values of the fluid in equilibrium with quartz are in a range of 5.7–6.3, 4.2–4.6 and 6.3–6.7‰ respectively, and most likely indicate a magmatic fluid source.     

Modification of a Palaeoproterozoic porphyry-like system: Integration of structural,geochemical, petrographic,and fluid inclusion data from the Aitik Cu–Au–Ag deposit,northern Sweden

The Aitik Cu–Au–Ag deposit in the Gällivare area in northern Sweden is Sweden's largest sulphide mine with an annual production of 35 Mt of ore, and the biggest open pit operation in northern Europe. It is proposed in the present study that the Aitik deposit represents a Palaeoproterozoic, strongly metamorphosed porphyry copper deposit that was affected ca. 100 Ma later by a regional IOCG-type hydrothermal event. Consequently, the Aitik deposit might represent a mixed ore system where an early copper mineralisation of porphyry type has been overprinted by later regional IOCG mineralisation.Several attempts have previously been made to genetically classify the Aitik Cu–Au–Ag deposit as a distinct ore type. New geochemical, petrographic, structural, and fluid inclusion results combined with published data have provided the opportunity to present new ideas on the genesis and evolution of the Aitik Cu–Au–Ag deposit. The emplacement of a ca. 1.9 Ga quartz monzodiorite that host the ore at Aitik was related to subduction processes and volcanic arc formation, and synchronous with quartz vein stockwork formation and porphyry copper mineralisation. Highly saline aqueous (38 wt.% NaCl) fluid inclusions in the stockwork veins suggest entrapment at 300 °C and a pressure of nearly 3 kbar, a high pressure for a typical porphyry copper ore, but consistent with conditions at associated deep root zones of intrusion-related magmatic–hydrothermal systems. The highly saline fluid formed disseminated and vein-type ore of mainly chalcopyrite and pyrite within comagmatic volcaniclastic rocks, and caused potassic alteration (biotite, microcline) of the host rocks. The early porphyry copper mineralising event was followed, and largely overprinted, by CO₂ and aqueous medium- to high-salinity (16–57 wt.% salts) fluids related to a ca. 1.8 Ga tectonic and metamorphic event (peak conditions 500–600 °C and 4–5 kbar). Extensive deformation of rocks and redistribution of metals occurred. Magnetite enrichment locally found within late veins, and late amphibole–scapolite and K feldspar alterations within the deposit, are some of the features at Aitik implying that aqueous fluids responsible for IOCG-mineralisation (200–500 °C and ~ 1 kbar) and extensive Na–Ca alteration in the region during the 1.8 Ga tectonic event also affected the Aitik rocks, possibly leading to addition of copper ± gold.     

Segregation of magmatic fluids and their potential in the mobilization of platinum-group elements in the South Kawishiwi Intrusion,Duluth Complex,Minnesota — Evidence from petrography,apatite geochemistry and coexisting fluid and melt inclusions

Pegmatitic and other felsic rock pockets and dike-like intrusions are abundant in the South Kawishiwi Intrusion of the Duluth Complex, including the basal, Cu–Ni–PGE mineralized units. These occurrences are found as pockets, pods or as veins and contain abundant accessory apatite and quartz. Quartz hosts primary fluid inclusions as well as silicate melt inclusions. Combined microthermometry and Raman spectroscopy helped to determine the bulk composition of primary fluid inclusions that are CO₂-rich (95 mol%) and contain small amounts of H₂O (4.5 mol%), CH₄ (0.4 mol%) and trace N₂, respectively. This combined technique also made it possible to measure total homogenization temperatures of the inclusions (Th_tot = ~ 225 ± 10 °C), otherwise not detectable during microthermometry. Silicate melt inclusions have been quenched to produce homogeneous glasses corresponding to the original melt. Composition of the entrapped melt is granitoid, peraluminous and is very poor in mafic components. We interpret the melt as a product of partial melting of the footwall rocks due to the contact effect of the South Kawishiwi Intrusion. The presence of CO₂ in the vapor bubbles of the quenched melt inclusions and petrographic evidence suggest that the fluid and melt inclusion assemblages are coeval. The composition of the fluid and melt phase implies that the fluid originates from the mafic magma of the South Kawishiwi Intrusion and the fluid and melt phases coexisted as a heterogeneous melt–fluid system until entrapment of the inclusions.Coexistence of primary fluid and melt inclusions makes it possible to calculate a minimum entrapment pressure (~ 1.7 kbar) and thus estimate formation depth (~ 5.8 km) for the inclusions. Chlorine is suggested to behave compatibly in the silicate melt phase in the fluid–melt system represented by the inclusions, indicated by the high (up to 0.3%) Cl-concentrations of the silicate melt and CO₂-rich nature of the fluid.Apatite halogen-contents provide further details on the behavior of Cl. Apatite in pegmatitic pockets often has elevated Cl-concentrations compared to troctolitic rocks, suggesting enrichment of Cl with progressive crystallization. Systematic trends of Cl-loss at some differentiated melt pockets suggest that in some places Cl exsolved into a fluid phase and migrated away from its source. The segregation of Cl from the melt is probably inhibited by the presence of CO₂-rich fluids until the last stages of crystallization, increasing the potential for the development of late-stage saline brines.Platinum-group minerals are often present in microcracks in silicate minerals, in late-stage differentiated sulfide veinlets and in association with chlorapatite, indicating the potential role of Cl-bearing fluids in the final distribution of PGEs.     

Metallogenic age and hydrothermal evolution of the Jidetun Mo deposit in central Jilin Province,northeast China: Evidence from fluid inclusions,isotope systematics,and geochronology

The Jidetun deposit is a large porphyry Mo deposit that is located in central Jilin Province, northeast China. The Mo mineralization occurs mainly at the edge of porphyritic granodiorite, as well as the adjacent monzogranite. Field investigations, cross-cutting relationships, and mineral paragenetic associations indicate four stages of hydrothermal activity. To determine the relationships between mineralization and associated magmatism, and better understand the metallogenic processes in ore district, we have undertaken a series of studies incluiding molybdenite Re–Os and zircon U–Pb geochronology, fluid inclusions microthermometry, and C–H–O–S–Pb isotope compositions. The molybdenite Re–Os dating yielded a well-defined isochron age of 168.9 ± 1.9 Ma (MSWD = 0.34) that is similar to the weighted mean ²⁰⁶Pb/²³⁸U age of 173.5 ± 1.5 Ma (MSWD = 1.8) obtained from zircons from the porphyritic granodiorite. The results lead to the conclusion that Mo mineralization, occurred in the Middle Jurassic (168.9 ± 1.9 Ma), was spatially, temporally, and genetically related to the porphyritic granodiorite (173.5 ± 1.5 Ma) rather than the older monzogranite (180.1 ± 0.6 Ma). Fluid inclusion and stable (C–H–O) isotope data indicate that the initial H₂O–NaCl fluids of mineralization stage I were of high-temperature and high-salinity affinity and exsolved from the granodiorite magma as a result of cooling and fractional crystallization. The fluids then evolved during mineralization stage II into immiscible H₂O–CO₂–NaCl fluids that facilitated the transport of metals (Mo, Cu, and Fe) and their separation from the ore-bearing magmas due to the influx of abundant external CO₂ and heated meteoric water. Subsequently, during mineralization stage III and IV, increase of pH in residual ore-forming fluids on account of CO₂ escape, and continuous decrease of ore-forming temperatures caused by the large accession of the meteoric water into the fluid system, reduced solubility and stability of metal clathrates, thus facilitating the deposition of polymetallic sulfides.     

The Vilalba gold district,a new discovery in the Variscan terranes of the NW of Spain: A geologic,fluid inclusion and stable isotope study

This work defines the Vilalba gold district, a new gold region in the NW of Spain comprising three mineralized areas (Castro de Rei, Valiña–Azúmara and Arcos) and two different types of mineralization: 1) W–Au skarn in Castro de Rei, and 2) Au–As (Ag–Pb–Zn–Cu–Sb) vein/disseminated mineralization in Valiña–Azúmara and Arcos. Mineralization is mainly hosted by impure limestone and black slates (lower Cambrian) and spatially related to Variscan and Late-Variscan structures. Rhyolite dikes occur in Arcos (299 ± 6 Ma) and Castro de Rei, both consisting of peraluminous, high-potassium and calc-alkaline rocks. These dikes represent the fractionated expression of unexposed post-tectonic granitoids located at depth. The Castro de Rei area exhibits a contact aureole with biotite ± cordierite and calc-silicate hornfels. Prograde skarn consists of garnet, pyroxene, quartz, wollastonite and scheelite. The retrograde alteration took place in two stages and mainly consists of amphibole, epidote, zoisite, quartz, calcite, chlorite and sulfides. Gold mineralization in the skarn occurs as invisible gold in sulfoarsenides and as electrum related to Bi–Te–S minerals. The mineralization of Valiña–Azúmara and Arcos comprises two stages. The first consists of As-rich pyrite and arsenopyrite with invisible gold. The second stage mainly consists of base metal sulfides and Ag–Pb–Zn–Cu–Sb sulfosalts.Hydrothermal fluids involved in the skarn formation are low salinity (up to 6.6 wt.% NaCl eq.) aqueous carbonic fluids (H₂O + CO₂ ± CH₄ ± N₂) evolving into aqueous fluids during the last stage of gold mineralization. Stable isotope geochemistry indicates the importance of a magmatic fluid in the early stages (δ¹⁸O_SMOW from 7.5 to 11‰; δ³⁴S_CDT from 2.7 to 5.9‰) that evolved through interaction with host-rocks and mixing with metamorphic and/or meteoric fluids. The δ³⁴S_CDT values (7.8–10.9‰) of second retrograde stage sulfides suggest the incorporation of ³⁴S-enriched from host-rocks. In Valiña–Azúmara and Arcos, the fluid inclusion and isotope studies indicate similar hydrothermal fluids to those associated with the second retrograde skarn stage. Taking into account the fluid inclusion study and mineral geothermometry, an attempt was made to determine the P–T conditions of ore formation. The prograde skarn of Castro de Rei formed at temperatures and pressures ranging from 520 to 560 °C and from 1.7 to 2.5 kb. The mineralization of Valiña–Azúmara formed at minimum P–T conditions of 1.7 kb and 355 °C. The estimated temperatures for the Arcos mineralization are similar to those of Valiña–Azúmara (up to 383 °C) but at lower pressures.We propose the model of intrusion related gold systems (IRGSs) to explain the mineralizations of the Vilalba gold district. In this model, the Castro de Rei skarn and the Valiña–Azúmara mineralization represent a proximal and a distal deposit, respectively, relative to an unexposed granitoid situated at depth. We also consider Arcos as a distal deposit in relation to another unexposed granitoid located further south in the district.