首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 15 毫秒
1.
A new study of Black Mesa pluton (Henry Mountains, Colorado Plateau, Utah, USA) indicates that it is a classic example of a small upper-crustal pluton assembled over a few years by incremental amalgamation of discrete magma pulses. The results of our petrostructural study of the pluton interior allow us to constrain the geometry, kinematics and timing of the processes. The symmetric internal fabric is interpreted as an evidence for a feeding by below and not laterally. The observed rotation of the lineation, from WNW–ESE on the very top to NNE–SSW below, lead us to propose that the fabric at the base of the pluton is a record of magma infilling process, and the fabric at the very top is a record of the strain due to the relative movement between magma and wallrocks. A consequence is that except at the contact between pluton and wallrocks (top and margins), the stretching direction, recorded by the lineation, is not parallel to the flow direction of the magma i.e. displacement. The Black Mesa pluton is a sheeted laccolith on its western edge and a bysmalith on its eastern edge. This E–W asymmetry in pluton geometry/construction and the symmetrical internal fabric indicates that the apparently different west and east growth histories could have occurred simultaneously. Our field data indicate pluton growth through an asymmetric vertical stacking of sill-like horizontal magma sheets.One-dimensional thermal models of the pluton provide maximum limits on the duration of its growth. We have constrained the number, the thickness, and the frequency of magma pulses with our structural observations, including: (1) the emplacement of the pluton by under-accretion of successive magma pulses, (2) the absence of solid-state deformation textures at internal contacts, and (3) the apparent absence of significant recrystallization in the wallrocks. Our results suggest that the emplacement of the Black Mesa pluton was an extremely rapid event, with a maximum duration on the order of 100 years, which requires a minimum vertical displacement rate of the wallrocks immediately above the pluton greater than 2 m/yr. Finally, our data show that the rates of plutonic and volcanic processes could be similar, a significant result for interpretation of magma transfer in arc systems.  相似文献   

2.
Deformation bands in porous sandstones have been extensively studied for four decades, whereas comparatively less is known about deformation bands in porous carbonate rocks, particularly in extensional settings. Here, we investigate porous grainstones of the Globigerina Limestone Formation in Malta, which contain several types of deformation bands in the hangingwall of the Maghlaq Fault: (i) bed-parallel pure compaction bands (PCB); (ii) pressure solution-dominated compactive shear bands (SCSB) and iii) cataclasis-dominated compactive shear bands (CCSB). Geometric and kinematic analyses show that the bands formed sequentially in the hangingwall of the evolving Maghlaq growth fault. PCBs formed first due to fault-controlled subsidence and vertical loading; a (semi-)tectonic control on PCB formation is thus documented for the first time in an extensional setting. Pressure solution (dominating SCSBs) and cataclasis (dominating CCSBs) appear to have operated separately, and not in concert. Our findings therefore suggest that, in some carbonate rocks, cataclasis within deformation bands may develop irrespective of whether pressure solution processes are involved. We suggest this may be related to stress state, and that whereas pressure solution is a significant facilitator of grain size reduction in contractional settings, grain size reduction within deformation bands in extensional settings is less dependent on pressure solution processes.  相似文献   

3.
Falling‐stage deltas are predicted by sequence stratigraphic models, yet few reliable criteria are available to diagnose falling‐stage deltaic systems in surface exposures. Recent work on the Upper Cretaceous (Turonian) Ferron Sandstone in the western Henry Mountains Syncline of south‐central Utah has established its environment of deposition as a series of modest‐sized (5 to 20 km wide), probably asymmetrical, mixed‐influence deltas (‘Ferron Notom Delta’) that dispersed sediment eastwards from the rising Sevier orogenic hinterland into the Western Cordilleran Foreland Basin. Analysis of sandstone body stacking patterns in a 67 km long, depositional strike‐parallel (north–south) transect indicates that the growth of successive deltas was strongly forced by synsedimentary growth of a long wavelength (ca 100 km), 50 m amplitude fold structure. Herein, two discrete areas within this transect, superbly exposed in three dimensions, are documented in order to determine the details of stratal stacking patterns in the depositional dip direction, and thereby to assess the stratigraphic context of the Ferron Notom Delta. In the two study areas, dip transects expose facies representing river mouth bar to distal delta front environments over distances of 2 to 4 km. Key stratal packages are clinothems that offlap, downlap, and describe descending regressive trajectories with respective to basal and top datums; they are interpreted as the product of relative sea‐level fall. The vertical extent of clinoforms suggests that deltas prograded into <30 m of water. Furthermore, these deltaic successions preserve abundant evidence of delta front slope failure, growth faulting, and incision and filling of deep (<15 m) slope gullies. Gully fills are composed of chaotic intraformational breccia and/or massive sandstone, and constitute linear, ‘shoestring’ sandbodies in the distal portions of individual palaeodelta systems. They are interpreted to have been cut and filled during the late falling‐stage and lowstand of relative sea‐level cycles. The north–south distribution of the stratal style described above seems to be focused on the flanks of the growth anticline, and so the numerous falling‐stage systems tracts preserved within the Ferron Notom Delta probably owe their origin to synsedimentary structural growth, and the unstable fluid pressure regime that this growth imposed on the sea floor and shallow subsurface.  相似文献   

4.
主要由橄榄岩相、辉石岩相组成的下什堂基性-超基性岩体侵位于南祁连造山带化隆岩群中,且伴有磁黄铁矿、镍黄铁矿和黄铜矿等的硫化物矿化。精确的LA-ICP-MS锆石U-Pb定年获得了下什堂岩体的形成年龄为449.8±2.4Ma。地球化学表现为轻稀土富集和明显的Nb-Ta负异常特征,εNd值在-2.62~-2.52之间,(87Sr/86Sr)i比值集中在0.709012~0.714682之间。Sr-Nd同位素表明,下什堂基性-超基性岩体的母岩浆来自一个曾经被交代富集的地幔源区。地壳富硅组分的同化混染在成矿过程中起了很重要的控制作用。结合区域构造演化背景与成矿认识,认为南祁连化隆地区的成岩成矿可能与俯冲结束后,后碰撞伸展环境密切相关,这对于指导区域找矿实践和成矿理论研究均具重要的地质意义。  相似文献   

5.
The Tia Granodiorite, a Hillgrove Suite pluton in the southern New England Fold Belt, intruded complexly deformed metasediment and metabasite belonging to the Tia Complex, which at the time of intrusion had already been affected by two deformation events at low‐T moderate‐P metamorphic conditions and two overprinting deformation events at high‐T low‐P metamorphic conditions. Emplacement took place during D5 thrusting associated with limited uplift as low‐P amphibolite facies metamorphism prevailed. Large‐scale warping during D6 was followed by a second penetrative thrusting event (D7) that caused further uplift and was initiated under lower amphibolite facies conditions.

The granodiorite has been dated at ~ 300 Ma using magmatic zircon, an age which is thought to approximate the emplacement age and thus D5. Biotite grains associated with D7 uplift yield a Rb/Sr age of 264±1.3 Ma. D5 and D7 appear to have formed during one extended high‐T metamorphic event because intervening retrogression is lacking in spite of extensive hydrous fluxing, as indicated by numerous syn‐D6 quartz veins. This thermal event coincided with the opening of the extensional Permian basins.  相似文献   

6.
总结了褶皱相关断裂发育机制的3个构造几何学模型:同心圆褶皱模型、膝折带褶皱模型和弯流褶皱模型。基于燕山中部中、新元古界地层中发育的5个露头尺度褶皱及其中、小型断裂构造的实例剖析,探讨了收缩变形过程中褶皱与断裂构造发育时序与褶皱相关断裂构造的产生机制。研究指出,规模与所在褶皱构造相当或略小的断裂构造当中,既有形成时间早于褶皱变形的断层,也有在褶皱变形过程中调节褶皱不同部位应变差异的褶皱相关断裂构造,而且卷入后期变形的早期断裂可能成为制约褶皱成核位置的影响因素,以及成为枢纽叠覆楔构造的形成方式之一。断层位移-距离曲线特征和断层与褶皱变形几何学、运动学关系分析,可用来判断断层、褶皱变形发生相对时序。认为影响褶皱相关断裂构造发育的机制主要有3种:(1)纵弯滑褶皱作用中,翼部顺层滑动受到限制而无法持续时,将通过断层向上切层的方式予以调节,从而形成翼部或转折端揳入逆冲断裂以及背离向斜和指向背斜逆冲断层;(2)各种因素导致的褶皱曲率变化是褶皱相关断裂产生的重要机制之一,褶皱曲率变化可由褶皱轴面的合并和新生直观反映,轴面合并引起褶皱曲率变化的层位,可能是诱发褶皱相关断裂,如背离向斜和指向背斜逆冲构造开始产生的重要部位;(3)能干性差异和强硬层之间距离较大的岩层组合发生纵弯褶皱变形时,软弱岩系在褶皱核部的聚集和逃逸,是迫使递进收缩的强硬层产生褶皱相关断裂构造的重要机制。  相似文献   

7.
The Illapel Plutonic Complex (IPC), located in the Coastal Range of central Chile (31°–33° S), is composed of different lithologies, ranging from gabbros to trondhjemites, including diorites, tonalites and granodiorites. U/Pb geochronological data shows that the IPC was amalgamated from, at least, four different magmatic pulses between 117 and 90 Ma (Lower to mid-Cretaceous). We present new paleomagnetic results including Anisotropy of Magnetic Susceptibility (AMS) from 62 sites in the plutonic rocks, 10 sites in country rocks and 7 sites in a mafic dyke swarm intruding the plutonic rocks.Remanent magnetizations carried by pyrrhotite in deformed country rock sediments nearby the intrusive rocks indicate that tilting of the sedimentary rocks occurred prior or during the intrusion. The paleomagnetic study shows no evidence for either a measurable tilt of the IPC or a significant rotation of the forearc at this latitude range. Moreover, new 40Ar/39Ar ages exclude any medium- to low-temperature post-magmatic recrystallization/deformation event in the studied samples. AMS data show a magnetic foliation that is often sub-vertical. Despite an apparent N–S elongated shape of the IPC, the large variations in the orientation of the AMS foliation suggests that this plutonic complex could be made of several units distributed in a N–S trend rather than N–S elongated bodies.Previous works have suggested for this area a major shift on tectonic evolution from highly extensional during Lower Cretaceous to a period around 100 Ma, associated with exhumation and compressive deformation to conform the present day Coastal Range. The low degree of anisotropy and the lack of evidence for a tectonic fabric in the intrusive rocks indicate that the shift from extensional to compressional should postdate the emplacement of the IPC, i.e. is younger than 90Ma.  相似文献   

8.
The Sarcheshmeh copper deposit is one of the world's largest Oligo-Miocene porphyry copper deposits in a continental arc setting with a well developed supergene sulfide zone, covered mainly by a hematitic gossan. Supergene oxidation and leaching, have developed a chalcocite enrichment blanket averaging 1.99% Cu, more than twice that of hypogene zone (0.89% Cu). The mature gossans overlying the Sarcheshmeh porphyry copper ores contain abundant hematite with variable amounts of goethite and jarosite, whereas immature gossans consist of iron-oxides, malachite, azurite and chrysocolla. In mature gossans, Au, Mo and Ag give significant anomalies much higher than the background concentrations. However, Cu has been leached in mature gossans and gives values close or even less than the normal or crustal content (< 36.7 ppm). Immature gossans are enriched in Cu (160.3 ppm), Zn (826.7 ppm), and Pb (88.6 ppm). Jarosite- and goethite-bearing gossans may have developed over the pyritic shell of most Iranian porphyry copper deposits with pyrite–chalcopyrite ratios greater than 10 and therefore, do not necessarily indicate a promising sulfide-enriched ore (Kader and Ijo). Hematite-bearing gossans overlying nonreactive alteration halos with pyrite–chalcopyrite ratios about 1.5 and quartz stringers have significant supergene sulfide ores (Sarcheshmeh and Miduk). The copper grade in supergene sulfide zone of Sarcheshmeh copper deposit ranges from 0.78% in propylitized rocks to 3.4% in sericitized volcanic rocks, corresponding to the increasing chalcopyrite–pyrite or chalcocite–pyrite ratios from 0.3 to 3, respectively. Immature gossans with dominant malachite and chrysocolla associated with jarosite and goethite give the most weakly developed enrichment zone, as at God-e-Kolvari. The average anomalous values of Au (59.6 ppb), Mo (42.5 ppm) and Ag (2.6 ppm) in mature gossans associated with the Sarcheshmeh copper mine may be a criterion that provides a significant exploration target for regional metallogenic blind porphyry ore districts in central Iranian volcano–plutonic continental arc settings. Drilling for new porphyry ores should be targeted where hematitic gossans are well developed. The ongoing gossan formation may result in natural acidic rock drainage (ARD).  相似文献   

9.
The Hujiayu Cu deposit,representative of the "HuBi-type" Cu deposits in the Zhongtiao Mountains district in the southern edge of the North China Craton,is primarily hosted in graphitebearing schists and carbonate rocks.The ore minerals comprise mainly chalcopyrite,with minor sphalerite,siegenite[(Co,Ni)_3S_4],and clausthalite[Pb(S,Se)].The gangue minerals are mainly quartz and dolomite,with minor albite.Four fluid inclusion types were recognized in the chalcopyrite-pyrite-dolomite-quartz veins,including CO_2-rich inclusions(type Ⅰ),low-salinity,liquid-dominated,biphase aqueous inclusions(type Ⅱ),solid-bearing aqueous inclusions(type Ⅲ),and solid-bearing aqueous-carbonic inclusions(type Ⅳ).Type I inclusion can be further divided into two sub-types,i.e.,monophase CO_2 inclusions(type Ⅰa) and biphase CO_2-rich inclusions(with a visible aqueous phase),and type Ⅲ inclusion is divided into a subtype with a halite daughter mineral(type Ⅲa) and a subtype with multiple solids(type Ⅲb).Various fluid inclusion assemblages(FIAs) were identified through petrographic observations,and were classified into four groups.The group-1 FIA,consisting of monophase CO_2 inclusions(type Ⅰa),homogenized into the liquid phase in a large range of temperatures from-1 to 28℃,suggesting post-entrapment modification.The group-2 FIA consists of type Ⅰb,Ⅲb and Ⅳ inclusions,and is interpreted to reflect fluid immiscibility.The group-3 FIA comprises type Ⅱ and Ⅲa inclusions,and the group-4FIA consists of type Ⅱ inclusions with consistent phase ratios.The group-1 and group-2 FIAs are interpreted to be entrapped during mineralization,whereas group-3 and group-4 FIAs probably represent the post-mineralization fluids.The solid CO_2 melting temperatures range from-60.6 to56.6℃ and from-66.0 to-63.4℃ for type Ⅰa and type Ⅳ inclusions,respectively.The homogenization temperatures for type Ⅱ inclusions range from 132 to 170℃ for group-3 FIAs and115 to 219℃ for group-4 FIAs.The halite melting temperatures range from 530 to 562℃ for typeⅢ b and Ⅳ inclusions,whereas those for type Ⅲa inclusions range from 198 to 398℃.Laser Raman and SEM-EDS results show that the gas species in fluid inclusions are mainly CO_2 with minor CH_4,and the solids are dominated by calcite and halite.The calcite in the hosting marble and dolomite in the hydrothermal veins have δ~(13)C_(V-pdb) values of-0.2 to 1.2‰ and-1.2 to-6.3‰,and δ~(18)O_(v-smow) values of 14.0 to 20.8 ‰ and 13.2 to 14.3‰,respectively.The fluid inclusion and carbon-oxygen isotope data suggest that the ore-forming fluids were probably derived from metamorphic fluids,which had reacted with organic matter in sedimentary rocks or graphite and undergone phase separation at 1.4-1.8 kbar and 230-240℃,after peak metamorphism.It is proposed that the Hujiayu Cu deposit consists of two mineralization stages.The early stage mineralization,characterized by disseminated and veinlet copper sulfides,probably took place in an environment similar to sediment-hosted stratiform copper mineralization.Ore minerals formed in this precursor mineralization stage were remobilized and enriched in the late metamorphic hydrothermal stage,leading to the formation of thick quartz-dolomite-sulfides veins.  相似文献   

10.
The Altay orogenic belt (AOB), situated in the middle part of the Central Asian Orogenic Belt (CAOB), is one of the most important metallogenic belts in China. The Kangbutiebao Formation is a Late Paleozoic stratigraphic unit that hosts many important iron and Pb–Zn deposits. The Kangbutiebao Formation consists of intercalated volcanic and sedimentary rocks that have undergone regional greenschist to lower amphibolite facies metamorphism, and mainly outcrops in three NW-trending fault-bounded volcano–sedimentary basins, including the Maizi, Kelang, and Chonghuer basins. SHRIMP analyses of zircons from three metarhyolites of the Kangbutiebao Fm. in the Kelang Basin yield weighted mean 206Pb/238U ages of 412.6 ± 3.5 Ma, 408.7 ± 5.3 Ma and 406.7 ± 4.3 Ma, respectively, which can be interpreted as the eruption age of the Kangbutiebao silicic volcanic rocks in the Kelang Basin. These ages indicate that the Kangbutiebao Formation was formed during the Late Silurian to Early Devonian. They also demonstrate that the deposits hosted in the Kangbutiebao Formation were formed after 412–407 Ma. They play a key role in understanding the Paleozoic tectonic evolution and metallogenesis of the southern margin of the Chinese AOB.  相似文献   

11.

毕机沟层状岩体是扬子地块北缘汉南杂岩中最重要的镁铁-超镁铁质侵入体之一, 主要由下部带超镁铁质岩、中部带辉长岩和上部带闪长岩组成。本文对该岩体下部带橄长岩、橄榄辉长岩和橄榄辉长苏长岩以及中部带粗粒辉长岩、磁铁辉长岩和角闪辉长岩进行全岩主微量元素及亲铜元素分析, 全岩(La/Sm)N(0.43~2.89)和(Tb/Yb)N (1.08~1.52)比值以及La/Yb-Sm/Yb图解均表明毕机沟层状岩体源区属于尖晶石二辉橄榄岩。Ni/Cu-Pd/Ir图解显示毕机沟层状岩体母岩浆主要为高镁玄武岩, 模拟计算及高的S/Se比值显示其母岩浆经历了~5%的地壳混染并引进了外界硫, 导致毕机沟母岩浆在深部发生早期硫化物熔离, 造成其极高的Cu/Pd比值(5.21×103~1.67×106)和低的PGE含量。毕机沟母岩浆侵位到浅部岩浆房后, 下部带极少量的硫化物熔离进一步导致残余岩浆亏损PGE, 但S和Cu含量相对升高; 中部带从下部带残余岩浆中结晶分异, 具有更低的PGE含量和相对较高的S以及Cu含量。根据毕机沟层状岩体岩浆演化及硫化物熔离过程, 推测岩体深部及附近具有寻找Cu-Ni-PGE矿床的潜力, 查明其岩浆通道系统及岩浆运移方向对找矿勘查具有重要意义。

  相似文献   

12.
The Jiama copper deposit is one of the largest deposits recently found in Tibet and is composed of three types of mineralization including skarn, hornfels and porphyry. To investigate the relationship between mineralization, structure and alteration, we report new zircon U–Pb age and present field observations on the deformation characteritics associated with the copper mineralization in Jiama. Two main periods of deformation were identified, represented by D1 and D2 in Jiama. The first deformation (D1) occurred around 50 Ma, whereas the second deformation (D2) that was closely related to mineralization occurred later. Previous zircon U–Pb and molybnite Re–Os dating results indicate that the mineralizatoin occurred at ~15 Ma and thus the D1 regional deformation significantly occurred before the mineralization time, although the D1 deformation probably provided important space for the development of significant copper deposition. Our new mapping and observations on the D2 deformation demonstrate that the mineralization was closely coeval with or slightly later than the time of D2 deformation. The new U–Pb zircon age further indicates that the aplite formed in ~17.0 Ma and thus the D2 deformation happened later than this time because the D2 deformation cut across the aplite, which is proposed to be the key control for copper mineralization. Altered laminated hornfels including three types of alteration (A‐, K‐ and S‐type) were found spatially associated with the D2 deformation. The type‐A is mainly silicification, with fine sericite or chlorite, as well as abundant disseminated sulphides on fracture surfaces; the type‐S is mainly fine‐grained silicification with patches of chlorite, epidote and common sulphides; the type‐K (potassic alteration) appears to be fine‐grained biotite. Such types of alteration indicate the presence of skarns at depth where ore shoots are located. Taken together, the multiple structural‐magmatic‐mineralization events contributed to the formation of the supergiant Jiama porphyry copper deposit in Tibet. The results have general implication for regional exploration.  相似文献   

13.
Eslamy peninsula in NW of Iran is formed by a strato-volcano with collapsed calderon, which is intruded by lamprophyric dykes with minette composition. Also trachytic and microsyenitic dykes have intruded the volcanic rocks. The oldest volcanic activity includes eruption of leucite basanite, leucite tephrite, basanite and tephrite, which are associated with pyroclastic rocks. Lamprophyric dykes are distinguishable with large mica phenocrysts. Mica-clinopyroxenite xenoliths can be found in the rocks. The source magma of the rocks had a ultrapotassic to shoshonitic nature, rich in LREE and LILE. Eslamy peninsula lamprophyres are between alkaline and calc-alkaline lamprophyres in terms of REE patterns and spider diagrams for trace elements, but are closer to clac-alkaline lamprophyres. The behaviour of trace elements studied by the means of spider diagrams show that the magma, producing the lamprophyres, is generated from deep-mantle probably from a garnet-bearing source (garnet lherzolite) with high CO2/H2O content. The resulted magma had interacted with crustal materials and had formed Eslamy peninsula lamprophyres in a post-collisional tectonic setting. Geochemistry of rare elements indicate an extensive rutile-rich metasomatism in the source magma of the lamprophyres.  相似文献   

14.
In order to examine the transportation and deposition mechanisms of Hg, we investigated the ore and hydrothermal alteration minerals and solid organic matters from Itomuka mercury mine located in the eastern part of central Hokkaido. In addition to the ore minerals, native mercury and cinnabar, quartz, marcasite, alunite, kaolinite, and minor amounts of pyrite and smectite were identified in the Hg ore by powder X‐ray diffraction (XRD) analysis. This mineral assemblage of acid sulfate alteration was likely developed under the conditions of low temperature (≤100°C) and low pH (≤2) in the steam‐heated environment. The H2SO4 was produced above the water table by the oxidation of H2S separated from deep, near‐neutral fluids by boiling. The dominance of native mercury over cinnabar in Hg ore indicates that the greater part of mineralized Hg was transported as Hg0 in aqueous solution and vapor with low sulfur fugacity. The solid organic matters found in the Hg ore were analyzed with SEM‐EDS, micro‐XRD, and micro‐Fourier transform infrared (FTIR) spectroscopy, and these results suggest that the organic matters contributed to keeping the low fO2 of the Hg‐bearing fluid and transportation of Hg as Hg0 in S‐poor condition. Because the solubility of Hg in acidic fluid is low, neutral to alkaline fluid seems to have leached Hg from the basement sedimentary rocks of Hidaka Group which also supplied the organic matters to the fluid. The oxidation and cooling of Hg‐bearing solution and vapor triggered the deposition of liquid Hg as a primary phase.  相似文献   

15.
Plutons of the Naraku Batholith were emplaced into Proterozoic metasediments of the northern portion of the Eastern Fold Belt of the Mt Isa Inlier during two intrusive episodes approximately 200 million years apart. Structural relationships and geochronological data suggest that the older plutons (ca 1750 Ma) are contemporaneous with granites of the Wonga Batholith to the west. The Dipvale Granodiorite and the Levian Granite represent these older intrusive phases of the Naraku Batholith, and both contain an intense tectonic foliation, S1, which is interpreted to have formed during the north‐south shortening associated with D1 of the Isan Orogeny. The geometry of S1 form surfaces at the southern end of the Dipvale Granodiorite, and of the previously unrecognised sheeted contact, defines a macroscopic, steeply south‐southwest‐plunging antiform, which was produced by the regional D2 of the Isan Orogeny. S1 form surfaces in the Levian Granite define open F2 folds with wavelengths of several hundred metres. The structural age of emplacement of the Dipvale Granodiorite and the Levian Granite is interpreted to be pre‐ or syn‐ the regional D1. An intense foliation present in some of the younger (ca 1505 Ma) granites that comprise the bulk of the Naraku Batholith is interpreted to represent S3 of the Isan Orogeny. Foliations commonly have similar styles and orientations in both the pre‐D1 and younger plutons. This emphasises the simplicity with which regional fabrics can be, and probably have been, miscorrelated in the Eastern Fold Belt, and that the classification of granites in general on the basis of structural and geometric criteria alone is fraught with danger.  相似文献   

16.
黑龙江虎林盆地位于兴凯地块北部,盆地内部中央隆起区出露一套呈NE走向展布的虎林杂岩,岩石强烈韧性变形,对其变形样式及其动力学背景的探讨,为进一步研究兴凯地块乃至中国东北东部中生代构造属性和古太平洋构造体制下构造演化过程提供一个独特的视角。虎林杂岩主体由云母片岩和侵位其中的花岗质岩脉组成,塑性变形特征明显,发育倾向NW向片麻理,走向NE-SW的低角度矿物拉伸线理。岩石矿物组合、微观构造特征和石英EBSD组构分析显示岩石表现中低温变形样式,变形温度为350~450℃,石英变形机制以位错滑移和膨凸重结晶为主。结合宏观变形样式可知,虎林杂岩早期变形以NW倾向片麻理为标志,指示NW-SE向伸展作用,晚期变形以NE倾伏低角度矿物拉伸线理为标志,指示NE-SW向左行走滑事件。侵位的变形闪长玢岩的锆石年代学研究限定晚期左行走滑事件晚于闪长玢岩就位时间1070±17Ma。早白垩世期间,伊泽奈崎板块(古太平洋)NW向斜向俯冲和板片后撤,导致东北东部乃至整个中国东部NW-SE向伸展,造成大陆岩石圈减薄、岩浆活动和虎林伸展断陷盆地的形成。在早白垩世末(104Ma之后),伊泽奈崎板块高速向欧亚大陆俯冲由NNW转向N,由低角度俯冲替代高角度俯冲,使得中国东部再次遭受区域性挤压,导致虎林杂岩发育大规模NE向压扭性左行走滑变形和持续性隆升。  相似文献   

17.
Fluid compositions and bedding‐scale patterns of fluid flow during contact metamorphism of the Weeks Formation in the Notch Peak aureole, Utah, were determined from mineralogy and stable isotope compositions. The Weeks Formation contains calc‐silicate and nearly pure carbonate layers that are interbedded on centimetre to decimetre scales. The prograde metamorphic sequence is characterized by the appearance of phlogopite, diopside, and wollastonite. By accounting for the solution properties of Fe, it is shown that the tremolite stability field was very narrow and perhaps absent in the prograde sequence. Unshifted oxygen and carbon isotopic ratios in calcite and silicate minerals at all grades, except above the wollastonite isograd, show that there was little to no infiltration of disequilibrium fluids. The fluid composition is poorly constrained, but X(CO2)fluid must have been >0.1, as indicated by the absence of talc, and has probably increased with progress of decarbonation reactions. The occurrence of scapolite and oxidation of graphite in calc‐silicate beds of the upper diopside zone provide the first evidence for limited infiltration of external aqueous fluids. Significantly larger amounts of aqueous fluid infiltrated the wollastonite zone. The aqueous fluids are recorded by the presence of vesuvianite, large decreases in δ18O values of silicate minerals from c. 16‰ in the diopside zone to c. 10‰ in the wollastonite zone, and extensive oxidation of graphite. The carbonate beds interacted with the fluids only along margins where graphite was destroyed, calcite coarsened, and isotopic ratios shifted. The wollastonite isograd represents a boundary between a high aqueous fluid‐flux region on its higher‐grade side and a low fluid‐flux region on its lower‐grade side. Preferential flow of aqueous fluids within the wollastonite zone was promoted by permeability created by the wollastonite‐forming reaction and the natural tendency of fluids to flow upward and down‐temperature near the intrusion‐wall rock contact.  相似文献   

18.
The timing and mechanisms of lithospheric thinning and destruction of the North China Craton (NCC) remain controversial, and the overall geodynamics of the process are poorly understood. This paper documents Late Triassic igneous rocks including monzogranite, gabbro, and diorite from the Xiuyan District on the Liaodong Peninsula in the eastern NCC, which have LA-ICP-MS zircon U-Pb ages of 229.0 ± 0.4 Ma, 216.2 ± 0.9 Ma, and 210.6 ± 2.0 Ma, respectively. Monzogranite shows high-SiO2 adakite affinity, negative εHf(t) values (?20.6 to ?17.9), and old TDM2 ages (3.53–3.29 Ga), suggesting that their parental magma was derived from thickened Paleoarchean mafic lower crust and minor mantle materials that were also involved their generation. Gabbro is ultrapotassic, strongly enriched in LREEs and LILEs, depleted in HFSEs, and has evolved zircon Hf isotopes with negative εHf of ?10.04 to ?5.85 and old TDM2 ages (2.59–2.22 Ga). These are diagnostic signatures of a crustal component, but their high contents of MgO, Cr, Co, Ni indicate that the primary magma originated from enriched mantle. Diorite is enriched in LILEs and LREEs, depleted in HFSEs (with negative Nb, Ta, and Ti anomalies), and contains negative εHf(t) values (?13.64 to ?11.01). Compared with the gabbro, the diorite is relatively enriched in Nb, Ta and HREEs, and also contains younger TDM2 ages (2.11–1.94 Ga), suggesting that the diorite was formed by mixing between ancient lower crust-derived felsic magmas and asthenospheric mantle-derived magmas. Field observations, geochronology, geochemistry, and zircon Lu-Hf isotopes indicate that Late Triassic magmatism and tectonic activity resulted from deep subduction of the Yangtze Craton beneath the NCC in the Xiuyan area. This phase of tectonic activity was completed in the eastern NCC by the Late Triassic (216 Ma), and was subsequently followed by lithospheric thinning that began in the Late Triassic.  相似文献   

19.
李永生  张招崇 《岩石学报》2011,27(10):2975-2983
除极少数情况外,岩浆的演化过程基本为开放体系.AFC模型(同化混染+分离结晶)是模拟岩浆演化过程的经典方法.事实上,岩浆演化过程不仅和围岩有物质交换还存在能量的交换,因此由Spera和Bohrson提出的能量约束下的开放系统岩浆演化过程的同化混染与分离结晶(EC-AFC)模型更加符合地质实际,本文介绍了该模型的方法,在此基础上,以含铜镍矿床的四川力马河岩体为例,运用EC-AFC模型模拟该岩体的岩浆演化过程.结果表明,EC-AFC模型能很好的模拟该岩体的开放系统中岩浆演化过程;Sr同位素的EC-AFC模拟曲线表明岩浆很可能在中下地壳发生混染,岩浆与发生混染的围岩在成分上都具有不均一性.  相似文献   

20.
The NW-trending Bucaramanga fault links, at its southern termination, with the Soapaga and Boyacá faults, which by their NW trend define an ample horsetail structure. As a result of their Neogene reactivation as reverse faults, they bound fault-related anticlines that expose the sedimentary fill of two Early Jurassic rift basins. These sediments exhibit the wedge-like geometry of rift fills related to west-facing normal faults. Their structural setting was controlled further by segmentation of the bounding faults at approximately 10 km intervals, in which each segment is separated by a transverse basement high. Isopach contours and different facies associations suggest these transverse anticlines may have separated depocenters of their adjacent subbasins, which were shaped by a slightly different subsidence history and thereby decoupled. The basin fill of the relatively narrow basin associated with the Soapaga fault is dominated by fanglomeratic successions organized in two coarsening-upward cycles. In the larger basin linked to the Boyacá fault, the sedimentary fill consists of two coarsening-upward sequences that, when fully developed, vary from floodplain to alluvial fan deposits. These Early Jurassic rift fills temporally constrain the evolution of the Bucaramanga fault, which accommodated right-lateral displacement during the early Mesozoic rift event.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号