Metamorphic history and geodynamic significance of high-grade metabasites from the ophiolitic mélange beneath the Yarlung Zangbo ophiolites, Xigaze area, Tibet

Blocks of highly foliated amphibolite are locally embedded within a serpentinite mélange underlying the Yarlung Zangbo ophiolites in the Xigaze area of southern Tibet. The ophiolites are remnants of an Early Cretaceous back-arc basin within the Permo-Cretaceous Tethys Ocean, which are exposed along in the Yarlung Zangbo Suture Zone (YZSZ). These amphibolites are interpreted as fragments of a dismembered dynamothermal sole. Three types of amphibolite are present: (1) common amphibolite with assemblages of Hbl + Pl ± Ep ± Ap ± Ttn, (2) clinopyroxene-bearing amphibolite with Hbl ± Pl ± Cpx ± Ep ± Ttn ± Qtz ± Ap and (3) garnet–clinopyroxene-bearing amphibolite characterized by the assemblages Hbl + Cpx + Grt + Pl ± Rt and Grt + Hbl + Pl (corona assemblage). In all three types, plagioclase is pseudomorphed by late albite–prehnite. Retrograde cataclastic veins containing assemblages of Prh + Ab + Ep ± Chl are also present. P–T estimates indicate that the amphibolites reached peak metamorphic conditions of 13–15 kbar and 750–875 °C. Partial replacement of pyrope-rich (up to 35 mole%) garnet by Al-tschermakite (Al₂O₃ up to 21 wt%) reflects a high pressure (≈18 kbar, 600 °C) metamorphic event followed by rapid exhumation. Soon after exhumation, the amphibolites were intruded by very fine-grained diabase dykes that were then hydrothermally altered. The field relationships and metamorphic history of the amphibolites indicate formation during inception of subduction within a back-arc basin prior to obduction of the ophiolites onto the Indian passive margin.     

Erratum to: A spatio-temporal three-dimensional conceptualization and simulation of Dera Ismail Khan alluvial aquifer in visual MODFLOW: a case study from Pakistan

The Gour Oumelalen area exposes Paleoproterozoic (1.9 Ga) marbles and calc-silicate granulites. Some marbles show a specific mineralogy characterized by the presence of a highly aluminous clinopyroxene with Al₂O₃ content exceeding16 wt%. This clinopyroxene shows a marked zoning with a hedenbergitic core rimmed by fassaite. Phase relations are expressed by spectacular reaction textures in calc-silicate granulites as Opx + Cpx + Pl + H₂O  == > Grt + Qtz ± Am and Cpx + Ilm + Pl ± Mt = > Grt + Qtz + Spn. In olivine-bearing marbles, clinopyroxene and dolomite occur around olivine and calcite. According to thermodynamic modeling in the Na₂O–CaO–FeO–MgO–Al₂O₃–SiO₂–H₂O–TiO₂–Fe₂O₃ (NCFMASHTO) system, the first stage of metamorphism is located at 800 °C and 6–7 kbar, which is followed by an increase in pressure at 9–10 kbar and 800 °C and an isobaric cooling at 680 °C. The deduced anticlockwise P–T path is consistent with a granulitic metamorphism occurring in an active continental margin context.

     

Dolomitic marbles and associated calc-silicates, Tandilia belt, Argentina: Geothermobarometry, metamorphic evolution, and P–T path

The metamorphic evolution of dolomitic marbles and associated calc-silicate rocks from Punta Tota (NE Tandilia belt, Buenos Aires province, Argentina) has been evaluated through petrographic, geothermobarometric, and fluid inclusion studies. Thin beds of dolomitic marble are intercalated in amphibolites and constitute the upper part of a stratified basement sequence, which starts at the base with garnet migmatites showing a great abundance of pegmatitic segregates, overlain by biotite–garnet gneisses. Peak metamorphic conditions are estimated at 750–800 °C and 5–6 kb, followed by near isobaric cooling to about 500–450 °C and 5.5–6.5 kb. Anhydrous progressive metamorphic assemblages in both marbles (Fo + Cal + Dol + Cpx + Spl) and adjacent calc-silicate rocks (Cpx + An + Cal + Qtz) strongly retrogressed to hydrous minerals (Tr, Tlc, Grs, Czo, Srp) with decreasing temperatures and increasing water activities. The intense rehydration of the rocks relates to the emplacement of volatile-rich pegmatitic bodies (Qtz + Pl + Kfs + Bt + Grt), which also resulted in the crystallization of clinochlore + phlogopite in the marble and biotite + muscovite in the adjacent calc-silicate rocks. Metamorphic reactions based on textural relations and evaluated on a suitable petrogenetic grid, combined with geothermobarometric results and fluid inclusion isochores, indicate a metamorphic evolution along a counterclockwise P–T path. Two probable geotectonic settings for the determined P–T trajectory are proposed: (1) thinning of the crust and overlying supracrustal basin in an ensialic intraplate tectonic setting and (2) development of a marginal back-arc basin, associated with an oceanic–continental convergent plate margin. In both models, the initial extensional regime is followed by a compressional stage, with overthickening of the basement and supracrustal rocks, during the climax of the Transamazonian cycle at approximately 1800 Ma ago. Continuous convergence and blockage of structures produce transition to transcurrent tectonics (transpression) with a consequent moderate uplift.     

Metamorphic path constrained by metapelitic rocks from the inner Aiuruoca-Andrelândia nappe, south of the São Francisco craton, SE Brazil

A Nappe system south to southwest of the São Francisco Craton represents the southern extension of the Brasília belt and describes an inverted metamorphic pile of greenschist facies toward amphibolite facies. The Aiuruoca-Andrelândia nappe is one of the nappes of this system. The hind portion of the Aiuruoca-Andrelândia nappe, south of Caxambu and Aiuruoca (MG), consists of a structural-metamorphic domain transported toward the E-NE. There is a metamorphic transition, from the kyanite zone to kyanite and sillimanite coexistence, until the sillimanite zone. Metapelitic rocks preserve high-pressure parageneses (Rt–Ky–Grt–Ms–Bt–Pl–Qtz) and contain retrograde eclogitic rocks. Sil–Pl–Qtz coronitic intergrowths around garnets are common decompressive textures. Kyanite schists register the P_max of 11 kbar at 660 °C and define a decompressive path until 6–7.5 kbar at 650 °C. These P–T conditions represent the equilibrium in S₂ schistosity (amphibolite facies) and the beginning of the cooling path in the Ky–Sil transition. The decompressive path suggests an extrusional process, immediately after burying at about 60 km. Exhumation controlled by convergent events, related to the São Francisco Plate subduction and tectonic erosion, took these units, isothermally, to higher levels (20–33 km). Later, the metamorphic path shifted toward near-isobaric cooling.     

Fabric controls on strain accommodation in naturally deformed mylonites: The influence of interconnected micaceous layers

We present microstructural analyses demonstrating how the geometrical distribution and interconnectivity of mica influences quartz crystallographic preferred orientation (CPO) development in naturally deformed rocks. We use a polymineralic (Qtz + Pl + Kfs + Bt + Ms ± Grt ± Tur) mylonite from the Zanskar Shear Zone, a section of the South Tibetan Detachment (NW Himalaya), to demonstrate how quartz CPO intensity decreases from quartz-dominated domains to micaceous domains, independently of whether or not quartz grains are pinned by mica grains. We then use a bimineralic (Qtz + Ms) mylonite from the Main Central Thrust (NW Himalaya) to show how increasing mica grain connectivity is concomitant with a systematic weakening of quartz CPO. Our results draw distinctions between CPO weakening due to: (i) second phase drag, leading to ineffective recovery in quartz; and (ii) increased transmission and localisation of strain between interconnected mica grains. In the latter case, well-connected micaceous layers take up most of the strain, weakening the rock and preventing straining of the stronger quartz matrix. Our findings suggest that rock weakening in quartz-rich crustal rocks is influenced not only by the presence of mica-rich layers but also the degree of mica grain connectivity, which allows for more effective strain localization through the entire rock mass.     

Low-density CO2-rich fluid inclusions from charnockites of southwestern Madurai Granulite Block, southern India; implications on graphite mineralization

Characterization of fluid inclusions in graphite-bearing charnockites from the southwestern part of the Madurai Granulite Block in southern India reveals a probable relation with the formation and break down of graphite during the high-grade metamorphism. The first-generation monophase pure CO₂ inclusions, the composition of which is confirmed by laser Raman spectroscopy, recorded moderate density (0.77–0.87 g/cc) corresponding to low tapping pressure (around 2 kb) than that of the peak granulite-facies metamorphism. The precipitation of graphite, as inferred from graphite inclusions and δ¹³C values of the graphite from the outcrops, is interpreted as the cause of this lowering of fluid density. An intermediate generation of pseudosecondary inclusions resulted from the re-equilibration or modification of the first-generation fluids and the CO₂ formed is interpreted to be the oxidation product from graphite. The youngest generation of fluids which caused widespread retrogression of the granulites is a low-temperature (350 °C) high-saline (32.4–52.0 wt% NaCl equivalent) brine. Carbon isotope data on the graphite from the charnockites show δ¹³C values ranging from −11.3 to −19.9‰, suggesting a possibility of mixing of carbon sources, relating to earlier biogenic and later CO₂ fluid influx. Combining the information gathered from petrologic, fluid inclusion and carbon stable isotope data, we model the fluid evolution in the massive charnockites of the southwestern Madurai Granulite Block.     

Uncertainties in differential thermodynamic (Gibbs' method) P-T paths

A combined analytical and numerical evaluation of the uncertainties in P-T paths is made for three assemblages that propagates errors in the parameters: initial pressure, initial temperature, initial composition, change of composition of monitor parameters, endmember entropy, and endmember volume. Propagated errors along an isobaric heating path (T=77°C) for assemblage 1 (Grt-Bt-Pl-Qtz-Ms-Chl-H₂O), using as monitor parameters the mole fractions of almandine, spessartine, grossular, and anorthite, and ignoring uncertainties in thermodynamic properties, are approximately ±320 bars (1) and ±8.3°C (1) if rim compositional uncertainties of 5% in major cations are assumed, or ±2.5°C (1) and ±50 bars (1) if electron microprobe analytical uncertainties are assumed for compositions. The largest source of uncertainty is from the errors in the monitor parameters, and P-T path uncertainties can depend critically on which monitor parameters are used. If the mole fraction of annite is used as a monitor parameter in place of the anorthite content of plagioclase, then propagated uncertainties are worse than ±29°C (1) and ±5800 bars (1). P-T path uncertainties also depend on assemblage. 1 precisions in assemblages 2 (Grt–Bt–Pl–Qtz–Ms–Sil–H₂O) and 3 (Grt–Bt–Qtz–Kfs–Sil–H₂O) using as monitor parameters the mole fractions of almandine, spessartine, grossular, and anorthite are calculated to be ±267 bars and ±43.4°C and ±372 bars and ±8.2°C respectively. Estimates of the accuracies in P-T paths that include potential errors in endmember entropy of ±1 J/mol·K and in endmember volume of ±1 cm³/mol are: ±324 bars and ±8.5°C (assemblage 1), ±341 bars and ±48.6°C (assemblage 2), and ±388 bars and ±9.7°C (assemblage 3). Use of different garnet, plagioclase, and muscovite activity models can change the length of a P-T path by as much as 15%, but does not typically change directions in P-T space significantly. Models that incorporate changes of fluid composition shorten P-T paths in assemblages 1 and 3 but do not change trajectories significantly. Assemblage 2 is virtually unaffected by fluid phase models. For the mineral assemblages considered here and using appropriate monitor parameters, propagated errors are small compared to the total path length, suggesting that the differential thermodynamic approach is a precise and accurate method for determining amounts of heating or thickening during metamorphism, and hence for interpreting orogenic processes.     

Fluid inclusion characteristics of hematite-bearing quartz vein from the Daenam mine, Republic of Korea

The Daenam mine, which produced over 9250 tons of iron oxide ore from 1958 to 1962, is situated in the Early Cretaceous Yeongyang subbasin of the Gyeongsang basin. It consists of two lens-shaped, hematite-bearing quartz veins that occur along faults in Cretaceous leucocratic granite. The hematite-bearing quartz veins are mainly composed of massive and euhedral quartz and hematite with minor amounts of pyrite, pyrrhotite, mica, feldspar and chlorite.Fluid inclusions in quartz can be divided into three main types: CO₂-rich, CO₂–H₂O, and H₂O-rich. Hydrothermal fluids related to the formation of hematite are composed of either H₂O–CO₂–NaCl ± CH₄ (homogenization temperature: 262–455 °C, salinity <7 eq. wt.% NaCl) or H₂O–NaCl (homogenization temperature: 182–266 °C, and salinity <5.1 eq. wt.% NaCl), both of which evolved by mixing with deeply circulating meteoric water. Hematite from the quartz veins in the Daenam mine was mainly deposited by unmixing of H₂O–CO₂–NaCl ± CH₄ fluids with loss of the CO₂ + CH₄ vapor phase and mixing with downward percolating meteoric water providing oxidizing conditions.     

Fault–valve action and vein development during strike–slip faulting: An example from the Ribeira Shear Zone, Southeastern Brazil

Fluid inclusion microthermometry and structural data are presented for quartz vein systems of a major dextral transcurrent shear zone of Neoproterozoic–Cambrian age in the Ribeira River Valley area, southeastern Brazil. Geometric and microstructural constraints indicate that foliation–parallel and extensional veins were formed during dextral strike–slip faulting. Both vein systems are formed essentially by quartz and lesser contents of sulfides and carbonates, and were crystallized in the presence of CO₂–CH₄ and H₂O–CO₂–CH₄–NaCl immiscible fluids following unmixing from a homogeneous parental fluid. Contrasting fluid entrapment conditions indicate that the two vein systems were formed in different structural levels. Foliation–parallel veins were precipitated beneath the seismogenic zone under pressure fluctuating from moderately sublithostatic to moderately subhydrostatic values (319–397 °C and 47–215 MPa), which is compatible with predicted fluid pressure cycle curves derived from fault–valve action. Growth of extensional veins occurred in shallower structural levels, under pressure fluctuating from near hydrostatic to moderately subhydrostatic values (207–218 °C and 18–74 MPa), which indicate that precipitation occurred within the near surface hydrostatically pressured seismogenic zone. Fluid immiscibility and precipitation of quartz in foliation–parallel veins resulted from fluid pressure drop immediately after earthquake rupture. Fluid immiscibility following a local pressure drop during extensional veining occurred in pre-seismic stages in response to the development of fracture porosity in the dilatant zone. Late stages of fluid circulation within the fault zone are represented dominantly by low to high salinity (0.2 to 44 wt.% equivalent NaCl) H₂O–NaCl–CaCl₂ fluid inclusions trapped in healed fractures mainly in foliation–parallel veins, which also exhibit subordinate H₂O–NaCl–CaCl₂, CO₂–(CH₄) and H₂O–CO₂–(CH₄)–NaCl fluid inclusions trapped under subsolvus conditions in single healed microcracks. Recurrent circulation of aqueous–carbonic fluids and aqueous fluids of highly contrasting salinities during veining and post-veining stages suggests that fluids of different reservoirs were pumped to the ruptured fault zone during faulting episodes. A fluid evolution trending toward CH₄ depletion for CO₂–CH₄–bearing fluids and salinity depletion and dilution (approximation of the system H₂O–NaCl) for aqueous–saline fluids occurred concomitantly with decrease in temperature and pressure related to fluid entrapment in progressively shallower structural levels reflecting the shear zone exhumation history.     

Metamorphic evolution of the Maud Belt: P–T–t path for high-grade gneisses in Gjelsvikfjella, Dronning Maud Land, East Antarctica

A metamorphic petrological study, in conjunction with recent precise geochronometric data, revealed a complex P–T–t path for high-grade gneisses in a hitherto poorly understood sector of the Mesoproterozoic Maud Belt in East Antarctica. The Maud Belt is an extensive high-grade, polydeformed, metamorphic belt, which records two significant tectono-thermal episodes, once towards the end of the Mesoproterozoic and again towards the late Neoproterozoic/Cambrian. In contrast to previous models, most of the metamorphic mineral assemblages are related to a Pan-African tectono-thermal overprint, with only very few relics of late Mesoproterozoic granulite-facies mineral assemblages (M₁) left in strain-protected domains. Petrological and mineral chemical evidence indicates a clockwise P–T–t path for the Pan-African orogeny. Peak metamorphic (M_2b) conditions recorded by most rocks in the area (T = 709–785 °C and P = 7.0–9.5 kbar) during the Pan-African orogeny were attained subsequent to decompression from probably eclogite-facies metamorphic conditions (M_2a).The new data acquired in this study, together with recent geochronological and geochemical data, permit the development of a geodynamic model for the Maud Belt that involves volcanic arc formation during the late Mesoproterozoic followed by extension at 1100 Ma and subsequent high-grade tectono-thermal reworking once during continent–continent collision at the end of the Mesoproterozoic (M₁; 1090–1030 Ma) and again during the Pan-African orogeny (M_2a, M_2b) between 565 and 530 Ma. Post-peak metamorphic K-metasomatism under amphibolite-facies conditions (M_2c) followed and is ascribed to post-orogenic bimodal magmatism between 500 and 480 Ma.     

SHRIMP U–Pb zircon dating of the Neoproterozoic Penglai Group and Archean gneisses from the Jiaobei Terrane, North China, and their tectonic implications

Archean basement gneisses and supracrustal rocks, together with Neoproterozoic (Sinian) metasedimentary rocks (the Penglai Group) occur in the Jiaobei Terrane at the southeastern margin of the North China Craton. SHRIMP U–Pb zircon dating of an Archean TTG gneiss gave an age of 2541 ± 5 Ma, whereas metasedimentary rocks from the Neoproterozoic Penglai Group yielded a range in zircon ages from 2.9 to 1.8 Ga. The zircons can be broadly divided into three age populations, at: 2.0–1.8 Ga, 2.45–2.1 Ga and >2.5 Ga. Detrital zircon grains with ages >2.6 Ga are few in number and there are none with ages <1.8 Ga. These results indicate that most of the detrital material comes from a Paleoproterozoic source, most likely from the Jianshan and Fenzishan groups, with some material coming from Archean gneisses in the Jiaobei Terrane. An age of 1866 ± 4 Ma for amphibolite-facies hornblende–plagioclase gneiss, forming part of a supracrustal sequence within the Archean TTG gneiss, indicates Late Paleoproterozoic metamorphism. Both the Archean gneiss complex and Penglai metasedimentary rocks resemble previously described components of the Jiao-Liao-Ji orogenic belt and suggest that the Jiaobei Terrane has a North China Craton affinity; they also suggest that the time of collision along the Jiao-Liao-Ji Belt was at 1865 Ma.     

Neoarchaean magmatism and metamorphism of the western granulites in the central domain of the Mozambique belt, Tanzania: U–Pb shrimp geochronology and PT estimates

U–Pb sensitive high resolution ion microprobe (SHRIMP) dating of zircons from charnockitic and garnet–biotite gneisses from the central portion of the Mozambique belt, central Tanzania indicate that the protolith granitoids were emplaced in a late Archaean, ca. 2.7 Ga, magmatic event. These ages are similar to other U–Pb and Pb–Pb ages obtained for other gneisses in this part of the belt. Zircon xenocrysts dated between 2.8 and 3.0 Ga indicate the presence of an older basement. Major and trace element geochemistry of these high-grade gneisses suggests that the granitoid protoliths may have formed in an active continental margin environment. Metamorphic zircon rims and multifaceted metamorphic zircons are dated at ca. 2.6 Ga indicating that these rocks were metamorphosed some 50–100 my after their emplacement. Pressure and temperature estimates on the charnockitic and garnet–biotite gneisses were obscured by post-peak metamorphic compositional homogenisation; however, these estimates combined with mineral textures suggest that these rocks underwent isobaric cooling to 800–850 °C at 12–14 kbar. It is considered likely that the granulite facies mineral assemblage developed during the ca. 2.6 Ga event, but it must be considered that it might instead represent a pervasive Neoproterozoic, Pan African, granulite facies overprint, similar to the ubiquitous eastern granulites further to the east.     

Newly discovered youngest UHT metamorphism on Earth,Western Sulawesi,Indonesia

Ultrahigh-temperature (UHT) metamorphism represents an extreme crustal thermal event with peak conditions exceeding 900 °C at 7–13 kbar. In the modern-style plate tectonic system, records of the UHT metamorphism are relatively rare due to the secular cooling of Earth. In the Palu region of Western Sulawesi, we newly discovered a series of HT-UHT metamorphic rocks including amphibolite, granulite, eclogites and gneiss. Of them, two granulite samples (18CS14-2, 18CS14-4) with high garnet content (>50 mol%) are chosen for petrographic observation, phase equilibrium modelling, and zircon U-Pb dating. These rocks are characterized by a relic M₁ assemblage of Grt + Ky + Bt + Rt and a M₂ assemblage of Grt + Sil + Pl + Spl + Crd ± Qtz + Ilm + melt. Phase equilibrium modelling based on effective bulk compositions yields UHT conditions of 7.2–8.5 kbar/940–1080 °C (18CS14-2) and 7.0–7.3 kbar/1000–1040 °C (18CS14-4). U-Pb analysis reveals two generations of metamorphic zircon with evolving REE content that is intimately related to garnet growth and decomposition. Zircon age of 36–5.3 Ma is ascribed to syn- to post-M₁ metamorphism, whereas the young zircon age of 5.1–3.8 Ma is linked to syn- and post-M₂ stage. The UHT metamorphism was probably the consequence of the upwelling of asthenospheric mantle triggered by post-collisional delamination of lithosphere in the Miocene-Pliocene (ca. 5 Ma). It could represent the youngest known UHT metamorphism on Earth.     

Nature of fluids and regional implications for Lesser Himalayan carbonates and associated mineralization

Fluid inclusion data are presented for the successive stages of limestone, dolomite, magnesite and sulphide-bearing quartz veins in Proterozoic carbonate rocks of the Lesser Himalaya. Subsurface fluids were H₂O–NaCl–KCl ± MgCl₂ ± CaCl₂ and showed successive increase in salinity and temperature. The salinity of the pore fluid during limestone diagenesis was in the range of 7.5–15 eq wt.% NaCl and the magnesite-forming fluids had a salinity of about 9 to 19 eq wt.% NaCl. This progressive rise in salinity is attributed to a more saline fluid in the deeper zones. The inverse relation between homogenization temperatures and final melting temperatures suggests mixing of the fluids during diagenesis, and highly depleted δ¹⁸O values rule out participation of magmatic fluid in the mixing. A late stage carbonic fluid is linked with talc formation. The low temperature of sulphide-forming epigenetic solutions, as obtained from fluid inclusions, is also substantiated by the chemical data from these sulphides. δ³⁴S values in galena infer that magmatic sulphur was probably not involved, and the sulphur of the galena is derived from an isotopically heavy source.     

P–T conditions of mineralization in the Jonnagiri granitoid-hosted gold deposit, eastern Dharwar Craton, southern India: Constraints from fluid inclusions and chlorite thermometry

Gold mineralization at Jonnagiri, Dharwar Craton, southern India, is hosted in laminated quartz veins within sheared granodiorite that occur with other rock units, typical of Archean greenstone–granite ensembles. The proximal alteration assemblage comprises of muscovite, plagioclase, and chlorite with minor biotite (and carbonate), which is distinctive of low- to mid-greenschist facies. The laminated quartz veins that constitute the inner alteration zone, contain muscovite, chlorite, albite and calcite. Using various calibrations, chlorite compositions in the inner and proximal zones yielded comparable temperature ranges of 263 to 323 °C and 268 to 324 °C, respectively. Gold occurs in the laminated quartz veins both as free-milling native metal and enclosed within sulfides. Fluid inclusion microthermometry and Raman spectroscopy in quartz veins within the sheared granodiorite in the proximal zone and laminated auriferous quartz veins in inner zone reveal the existence of a metamorphogenic aqueous–gaseous (H₂O–CO₂–CH₄ + salt) fluid that underwent phase separation and gave rise to gaseous (CO₂–CH₄), low saline (~ 5 wt.% NaCl equiv.) aqueous fluids. Quartz veins within the mylonitized granodiorites and the laminated veins show broad similarity in fluid compositions and P–T regime. Although the estimated P–T range (1.39 to 2.57 kbar at 263 to 323 °C) compare well with the published P–T values of other orogenic gold deposits in general, considerable pressure fluctuation characterize gold mineralization at Jonnagiri. Factors such as fluid phase separation and fluid–rock interaction, along with a decrease in f(O₂), were collectively responsible for gold precipitation, from an initial low-saline metamorphogenic fluid. Comparison of the Jonnagiri ore fluid with other lode gold deposits in the Dharwar Craton and major granitoid-hosted gold deposits in Australia and Canada confirms that fluids of low saline aqueous–carbonic composition with metamorphic parentage played the most dominant role in the formation of the Archean lode gold systems.     

Geothermobarometry and fluid inclusions of dioritic rocks in Bangladesh: Implications for emplacement depth and exhumation rate

Application of hornblende thermobarometry and fluid inclusion studies to the Palaeoproterozoic (1.7 Ga) basement rocks from Maddhapara, NW Bangladesh, provide information on the pressure and temperature (P–T) conditions of crystallization, the emplacement depth and composition of magmatic fluid. The basement rocks are predominantly diorite or quartz diorite with a mineral assemblage of plagioclase, hornblende, biotite, quartz, K-feldspar, titanite, and secondary epidote and chlorite. The calculated P–T conditions of the dioritic rocks are 680–725 °C and 4.9–6.4 kbar, which probably correspond to crystallization conditions. Fluid inclusion studies suggest that low- to medium-salinity (0–6.4 wt.% NaCl_eq) H₂O-rich fluids are trapped during the crystallization of quartz and plagioclase. The isochore range calculated for primary aqueous inclusions is consistent with the P–T condition obtained by geothermobarometry. The basement rocks likely crystallized at a depth of 17–22 km, with a minimum average exhumation rate of 12–15 m/Ma during Palaeoproterozoic to Lopingian time. Such slow exhumation indicates low relief continental shield surface during this period.     

High-grade metamorphism, dehydration and crustal melting: a reinvestigation based on new experiments in the silica-saturated portion of the system KAlO2–MgO–SiO2–H2O–CO2 at P≤ 1.5 GPa

The system KAlO₂–MgO–SiO₂–H₂O–CO₂ has long been used as a model for the processes of granulite-facies metamorphism and the development of orthopyroxene-bearing mineral assemblages through the breakdown of biotite-bearing assemblages. There has been considerable controversy regarding the role of carbon dioxide in metamorphism and partial melting. We performed new experiments in this system (at pressures of 342 to 1500 MPa with T between 710 and 1045 °C and X ^Fl _H2O between 0.05 and 1.00), accurately locating most of the dehydration and melting equilibria in P-T-X ^Fl _H2O space. The most important primary result is that the univariant reaction Phl + Qtz + Fl = En + Sa + melt must be almost coincident with the fluid-absent reaction (Phl + Qtz = En + Sa + melt) in the CO₂-free subsystem. In conjunction with the results of previous measurements of CO₂ solubility in silicate melts and phase equilibrium experiments, our theoretical analysis and experiments suggest that CO₂ cannot act as a flux for partial melting. Crustal melting in the presence of H₂O–CO₂ mixed fluids will always occur at temperatures higher than with pure H₂O fluid present. Magmas produced by such melting will be granitic (s.l.) in composition, with relatively high SiO₂ and low MgO contents, irrespective of the H₂O–CO₂ ratio in any coexisting fluid phase. We find no evidence that lamprophyric magmas could be generated by partial fusion of quartz-saturated crustal rocks. The granitic melts formed will not contain appreciable dissolved CO₂. The channelled passage of hot CO₂-rich fluids can cause local dehydration of the rocks through which they pass. In rock-dominated (as opposed to fluid-dominated) systems, minor partial melting can also occur in veins initially filled with CO₂-rich fluid, as dehydration and local disequilibrium drive the fluid towards H₂O-rich compositions. However, CO₂ is unlikely to be a significant agent in promoting regional granulite-grade metamorphism, melting, magma generation, metasomatism or long-range silicate mass transfer in Earth's crust. The most viable model for the development of granulite-facies rocks involves the processes of fluid-absent partial melting and withdrawal of the melt phase to higher crustal levels. Received: 28 November 1996 / Accepted: 25 June 1997     

Fluid evolution in the Rushan lode gold deposit of Jiaodong Peninsula, eastern China

The Rushan gold deposit in the Jiaodong Peninsula is currently the largest lode gold in China. Gold occurs mainly in pyrite- and polymetallic sulfide–quartz vein/veinlet stockworks. Fluid inclusions in the deposit are divided into three main types, namely CO₂–H₂O, H₂O–CO₂ ± CH₄ and aqueous ones. Microthermometric data show that the pre-gold fluids were CO₂-dominant (X_CO2 up to 0.53), and the total homogenization temperatures fall in the range of 298377 °C. These fluids, modified by fluid/wallrock reactions, gradually evolved into fluids with less CO₂ (X_CO2 = 0.010.19) in the main ore-forming stage, and the total homogenization temperatures range from 170 to 324 °C. Hydrogen and oxygen stable isotope data suggest that ore-forming fluids were mixture of magmatic and meteoritic origin. Co-occurrence of gold and sulfides implies that gold was most likely transported in the form of gold–sulfide complexes. The wide distribution of CO₂ inclusions means that the pH variation during gold transportation was controlled by CO₂ buffering.     

Pan-African high pressure granulites from SE-Kenya: Petrological and geothermobarometric evidence for a polycyclic evolution in the Mozambique belt

Two different Pan-African tectono-metamorphic events are recognised in the Taita Hill Tsavo East National Park/Galana river area, SE-Kenya (Mozambique belt) based on petrographic and geothermobarometric evidence. Structurally, this area can be subdivided into four units: (1) the easternmost part of the basement along the Galana river is characterized by subhorizontal slightly to the west and east dipping foliation planes. Migmatic paragneisses with intercalated marbles, calcsilicates and metapelites and bands of amphibolites are the dominant rock type. (2) The western part of the Galana river within the Tsavo East National Park is a ca. 25 km wide shear zone with subvertical foliation planes. The eastern part shows similar rocks as observed in unit 1, while towards west, metasedimentary units become rare and the main rock types are tonalitic gneisses with intercalated amphibolites. (3) A 10 km wide zone (Sagala Hills zone) between the strike slip zone (unit 2) and the Taita Hills (unit 4) is developed. This zone is characterized by elongated and folded felsic migmatic amphibole and garnet bearing orthogneiss bodies with intercalated bands of mafic rocks. (4) The Taita Hills are a slightly to the N dipping nappe stack. The main rock type in the Taita Hills are amphibole–biotite–plagioclase–quartz ± garnet ± clinopyroxene ± scapolite bearing migmatic gneisses with mafic bands. In the southern part, metapelites, marbles and some amphibolites are common.Although the geological structures are different in units 1 and 2, the calculated PT conditions are similar with peak PT of 760–820 °C and 7.5–9.5 kbar. Temperatures in unit 3 (Sagalla Hills zone) and unit 4 (Taita Hills) are slightly higher ca. 760–840 °C, but pressure is significantly higher, ranging from 10 to 12 kbar. Sillimanite growth around kyanite, garnet zonation pattern, mineral reaction textures, and PT calculations constrain a “clock-wise” PT-path with near isobaric cooling following the peak of metamorphism. The different PT conditions, tectonic setting, and a different age of metamorphism are evidence that units 1 and 2 (Galana river) belong to a different tectono-metamorphic event than unit 3 (Sagala Hills zone) and 4 (Taita Hills). The major shear zone (unit 2) marks a tectonic suture dividing the two different tectono-metamorphic domains. It is also likely that it played an important role during exhumation of the granulite facies rocks from units 3 and 4.     

Fluid geochemistry in the Ivigtut cryolite deposit, South Greenland

The 1.27 Ga old Ivigtut (Ivittuut) intrusion in South Greenland is world-famous for its hydrothermal cryolite deposit [Na₃AlF₆] situated within a strongly metasomatised A-type granite stock. This detailed fluid inclusion study characterises the fluid present during the formation of the cryolite deposit and thermodynamic modelling allows to constrain its formation conditions.Microthermometry revealed three different types of inclusions: (1) pure CO₂, (2) aqueous-carbonic and (3) saline-aqueous inclusions. Melting temperatures range between − 23 and − 15 °C for type 2 and from − 15 to − 10 °C for type 3 inclusions. Most inclusions homogenise between 110 and 150 °C into the liquid.Stable isotope compositions of CO₂ and H₂O were measured from crushed inclusions in quartz, cryolite, fluorite and siderite. The δ¹³C values of about − 5‰ PDB are typical of mantle-derived magmas. The differences between δ¹⁸O of CO₂ (+ 21 to + 42‰ VSMOW) and δ¹⁸O of H₂O (− 1 to − 21.7‰ VSMOW) suggest low-temperature isotope exchange. δD (H₂O) ranges from − 19 to − 144‰ VSMOW. The isotopic composition of inclusion water closely follows the meteoric water line and is comparable to Canadian Shield brines. Ion chromatography revealed the fluid's predominance in Na, Cl and F. Cl/Br ratios range between 56 and 110 and may imply intensive fluid–rock interaction with the host granite.Isochores deduced from microthermometry in conjunction with estimates for the solidification of the Ivigtut granite suggest a formation pressure of approximately 1–1.5 kbar for the fluid inclusions. Formation temperatures of different types of fluid inclusions vary between 100 and 400 °C. Thermodynamic modelling of phase assemblages and the extraordinary high concentration in F (and Na) may indicate that the cryolite body and its associated fluid inclusions could have formed during the continuous transition from a volatile-rich melt to a solute-rich fluid.