Image Quality Control and Alignment of a Submillimeter Balloon-Borne Segmented Telescope

PRONAOS is a balloon-borne system dedicated to astronomical observations in the submillimeter range (180µm - 1050µm) based on the use of a 2m Cassegrain telescope. The primary mirror consists of six CFRP (Carbon Fiber Reinforced Plastic) panels, each being positioned by three actuators. The rotation angles of the panels have been measured in the visible range with the help of a CCD and digital centroiding techniques that were necessary because of the light scattering on the CFRP mirror. The translation movements (along the optical axis) of the panels have been measured with an interference technique in the submillimeter range. Both visible and submillimeter measurements were also necessary to determine the alignment of the telescope - focal instrument system with the star sensor. The whole alignment process leads to a precision of ±8 for the rotation angles and ±7µm for the translation of each panel, sufficient for a qualification of the system.     

Mechanical design of the solar telescope GREGOR

The mechanical structure of the GREGOR telescope was installed at the Observatorio del Teide, Tenerife, in 2004. New concepts for mounting and cooling of the 1.5‐meter primary mirror were introduced. GREGOR is an open telescope, therefore the dome is completely open during observations to allow for air flushing through the open, but stiff telescope structure. Backside cooling system of the primary mirror keeps the mirror surface close to ambient temperature to prevent mirror seeing. The large collecting area of the primary mirror results in high energy density at the field stop at the prime focus of the primary which needs to be removed. The optical elements are supported by precision alignment systems and should provide a stable solar image at the optical lab. The coudé train can be evacuated and serves as a natural barrier between the outer environmental conditions and the air‐conditioned optical laboratory with its sensitive scientific instrumentation. The telescope was successfully commissioned and will start its nominal operation during 2013 (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Calibration of the ART-XC mirror modules at MSFC

The Astronomical Röntgen Telescope X-ray Concentrator (ART-XC) is a hard X-ray telescope with energy response up to 30 keV, to be launched on board the Spectrum Röntgen Gamma (SRG) spacecraft in 2018. ART-XC consists of seven identical co-aligned mirror modules. Each mirror assembly is coupled with a CdTe double-sided strip (DSS) focal-plane detector. Eight X-ray mirror modules (seven flight and one spare units) for ART-XC were developed and fabricated at the Marshall Space Flight Center (MSFC), NASA, USA. We present results of testing procedures performed with an X-ray beam facility at MSFC to calibrate the point spread function (PSF) of the mirror modules. The shape of the PSF was measured with a high-resolution CCD camera installed in the focal plane with defocusing of 7 mm, as required by the ART-XC design. For each module, we performed a parametrization of the PSF at various angular distances Θ. We used a King function to approximate the radial profile of the near on-axis PSF (Θ < 9 arcmin) and an ellipse fitting procedure to describe the morphology of the far off-axis angular response (9 < Θ < 24 arcmin). We found a good agreement between the seven ART-XC flight mirror modules at the level of 10%. The on-axis angular resolution of the ART-XC optics varies between 27 and 33 arcsec (half-power diameter), except for the spare module.     

Spin-cast ZERODUR mirror substrates of the 8 m class and lightweight substrates for secondary mirrors

For about 20 years SCHOTT has been supplying the glass ceramic ZERODUR, a material with very low thermal expansion. Besides many other applications, ZERODUR is excellently suited for the manufacture of mirror substrates for telescopes. About 80% of all telescopes in the western world with mirror diameters >1.8 m have been equipped with ZERODUR during the last 10 years. The development of modern astronomical telescopes is aimed at larger primary mirrors and lighter secondary mirrors.New techniques have been developed by SCHOTT for manufacture of thin monolithic mirror blanks of more than 8 m in diameter. The development of thin meniscus shaped shells using the spin-casting technique was successfully completed last year. During a test production several mirror substrates up to 4.1 m in diameter and down to 57 mm in thickness could be produced. The know-how has been acquired for the fabrication of mirror substrates of more than 8 m in diameter by the spin-casting technique.SCHOTT has also performed considerable developmental work in the field of lightweighted ZERODUR mirror substrates which can be generated using different techniques: forming of the lightweighted structure during casting, fusion of individual components to a total structure and lightweighting of a massive block by various mechanical machining methods.Paper presented at the Symposium on the JNLT and Related Engineering Developments, Tokyo, November 29–December 2, 1988.Registered trademark of SCHOTT Glaswerke, Mainz.     

A fast tracking mirror for adaptive optics

A piezo driven tilt mirror was developed and built as one component of an image motion compensation system for a solar telescope. The bandwidth of the mirror with a diameter of 60 mm is about 1 kHz with negligible phase shift between input signal and mirror response up to 900 Hz. The tilt range is 1.6 mrad. Special care was taken to maintain the surface quality of the mirror to better than /15 after fixing it to the substrate.     

The optical reflector system for the CANGAROO-II imaging atmospheric Cherenkov telescope

A new imaging atmospheric Cherenkov telescope with a light-weight reflector has been constructed. Light, robust, and durable mirror facets of containing carbon fiber reinforced plastic laminates were developed for the telescope. The reflector has a parabolic shape (f/1.1) with a 30 m² surface area, which consists of 60 spherical mirror facets. The image size of each mirror facet is 0°.08 (FWHM) on average. The attitude of each facet can be adjusted by stepping motors. After the first in situ adjustment, a point image of about 0°.14 (FWHM) over 3° field of view was obtained. The effect of gravitational load on the optical system was confirmed to be negligible at the focal plane. The telescope has been in operation with an energy threshold for γ-rays of 300 GeV since May 1999.     

Evolutionary and structural properties of mirror star MACHOs

There can exist a hidden sector of the Universe in the form of parallel “mirror” world which has the same particle physics as the observable world and interacts with the latter only gravitationally. Big Bang nucleosynthesis bounds demand that the mirror sector should have a smaller temperature than the ordinary one. This implies that the mirror matter could play a role of dark matter, and in addition its chemical content should be dominated by helium. Here we study the evolutionary and structural properties of the mirror stars which essentially are similar to that of the ordinary stars but with higher helium contents. Being invisible in terms of photons, they could be observed only as MACHOs in the microlensing experiments. Using a numerical code, we compute evolution of stars with large helium abundances (Y = 0.30–0.80) and a wide range of masses, from 0.5 to 10 M. We found that helium dominated mirror star should have much faster evolutionary time (up to a factor 30) than the ordinary star with the same mass. In addition, we show the diagrams of luminosities, effective temperatures, central temperatures and densities, and compute the masses of the He-core at ignition and the minimum mass for carbon ignition, for different chemical compositions. The general conclusion is that mirror stars evolve faster as compared to ordinary ones, and explode earlier as type II supernovae, thus enriching the galactic halo of processed mirror gas with higher metallicity, with implications for MACHO observations and galaxy evolution.     

A method to measure the mirror reflectivity of a prime focus telescope

We have developed a method to measure the mirror reflectivity of telescopes. While it is relatively easy to measure the local reflectivity of the mirror material, it is not so straightforward to measure the amount of light that it focuses in a spot of a given diameter. Our method is based on the use of a CCD camera that is fixed on the mirror dish structure and observes simultaneously part of the telescope’s focal plane and the sky region around its optical axis. A white diffuse reflecting disk of known reflectivity is fixed in the telescopes focal plane. During a typical reflectivity measurement the telescope is directed to a selected star. The CCD camera can see two images of the selected star, one directly and another one as a spot focused by the mirror on the white disk. The ratio of the reflected starlight integrated by the CCD from the white disk to the directly measured one provides a precise result of the product of (mirror area × mirror reflectivity).     

Mirror Mode Waves Downstream of a Stream Interaction Region Forward Shock near 1 AU

Mirror mode waves in the solar wind are typically observed not as quasi-periodic sinusoidal signatures, but as trains of nonperiodic structures of two types: magnetic ??peaks?? and magnetic ??dips.?? Some trains of long durations have been called mirror mode storms. In this work we report mirror mode waves downstream of a stream interaction region (SIR) forward shock observed near 1?AU on 7?May 2007 with Solar Terrestrial Relations Observatory (STEREO) and Time History of Events and Macroscale Interactions during Substorms (THEMIS) data. The high-resolution magnetic-field data (0.125-second resolution) from STEREO are scanned to search for magnetic dips and peaks (or upgoing magnetic ??mesas??) in the solar wind. STEREO-A observes a mirror mode storm: the appearance of mirror mode waves (mainly magnetic peaks and upgoing mesas) is simultaneous with the entry into a high-density, high-temperature, and high plasma ?? accompanied by a depressed field region; the magnetic dips survive in the lower plasma-?? region. STEREO-B observes mirror mode waves (mainly magnetic peaks) with different amplitudes and asymmetric forms, which can survive in a low plasma ?? region. THEMIS-D, which was located in the solar wind, also observes mirror mode waves (mainly magnetic peaks and upgoing mesas) as well as an enhanced ion temperature anisotropy (T _????3T _??). The enhanced ion temperature anisotropy and high plasma ?? satisfy the mirror-instability criterion. These observations of STEREO and THEMIS-D show that mirror mode waves can be excited downstream of a SIR forward shock near 1?AU.     

Thermal characteristics of a classical solar telescope primary mirror

We present a detailed thermal and structural analysis of a 2 m class solar telescope mirror which is subjected to a varying heat load at an observatory site. A 3-dimensional heat transfer model of the mirror takes into account the heating caused by a smooth and gradual increase of the solar flux during the day-time observations and cooling resulting from the exponentially decaying ambient temperature at night. The thermal and structural response of two competing materials for optical telescopes, namely Silicon Carbide – best known for excellent heat conductivity and Zerodur – preferred for its extremely low coefficient of thermal expansion, is investigated in detail. The insight gained from these simulations will provide a valuable input for devising an efficient and stable thermal control system for the primary mirror.     

Mirror matter in the solar system: new evidence for mirror matter from Eros

Mirror matter is an entirely new form of matter predicted to exist if mirror symmetry is a fundamental symmetry of nature. Mirror matter has the right broad properties to explain the inferred dark matter of the Universe and might also be responsible for a variety of other puzzles in particle physics, astrophysics, meteoritics and planetary science. It is known that mirror matter can interact with ordinary matter non-gravitationally via photon-mirror photon kinetic mixing. The strength of this possibly fundamental interaction depends on the (theoretically) free parameter ε. We consider various proposed manifestations of mirror matter in our solar system examining in particular how the physics changes for different possible values of ε. We find new evidence for mirror matter in the solar system coming from the observed sharp reduction in crater rates (for craters less than about 100 m in diameter) on the asteroid 433 Eros. We also re-examine various existing ideas including the mirror matter explanation for the anomalous meteorite events, anomalous slow-down of Pioneer spacecraft etc.     

The NST: First results and some lessons for ATST and EST

In January 2009, first light observations with the NST (New Solar Telescope) in Big Bear Solar Observatory (BBSO) were made. NST has a 1.7 m primary with a 1.6 m clear aperture. First observational results in TiO and Hα are shown and discussed. The NST primary mirror is the most aspheric telescope mirror deployed to date. The NST is early in its commissioning, and the plans for this phase will be sketched. Lessons learned in building and implementing the NST are germane for the ATST and EST telescopes and will be discussed. The NST has an off‐axis Gregorian configuration consisting of a parabolic primary, heat‐stop, elliptical secondary and diagonal flats. The focal ratio of the primary mirror is f/2.4. The working wavelength range covers from 0.4 to 1.7 µm in the Coudé Lab beneath the telescope and all wavelengths including the far infrared at the Nasmyth focus on the dome floor (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

An experimental indoor phasing system based on active optics using dispersed Hartmann sensing technology in the visible waveband

A telescope with a larger primary mirror can collect much more light and resolve objects much better than one with a smaller mirror,and so the larger version is always pursued by astronomers and astronomical technicians.Instead of using a monolithic primary mirror,more and more large telescopes,which are currently being planned or in construction,have adopted a segmented primary mirror design.Therefore,how to sense and phase such a primary mirror is a key issue for the future of extremely large optical/infr...     

Implementation of an optimized Cassegrain system for radio telescopes

We present the antenna design for a radio interferometer, the Arcminute Microkelvin Imager, together with its beam pattern measurement. Our aim was to develop a low-cost system with high aperture efficiency and low ground spill across the frequency range 12–18 GHz. We use a modified Cassegrain system consisting of a commercially available paraboloidal primary mirror with a diameter of 3.7 m, and a shaped secondary mirror. The secondary mirror is oversized with respect to a ray optics design and has a surface that is bent towards the primary near its outer edge using a square term for the shaping. The antennas are simple to manufacture and therefore their cost is low. The design increased the antenna gain by approximately 10 per cent compared to a normal Cassegrain system while still maintaining low contamination from ground spill and using a simple design for the horn.     

Normalized and asynchronous mirror alignment for Cherenkov telescopes

Imaging Atmospheric Cherenkov Telescopes (IACTs) need imaging optics with large apertures and high image intensities to map the faint Cherenkov light emitted from cosmic ray air showers onto their image sensors. Segmented reflectors fulfill these needs, and as they are composed from mass production mirror facets they are inexpensive and lightweight. However, as the overall image is a superposition of the individual facet images, alignment is a challenge. Here we present a computer vision based star tracking alignment method, which also works for limited or changing star light visibility. Our method normalizes the mirror facet reflection intensities to become independent of the reference star’s intensity or the cloud coverage. Using two CCD cameras, our method records the mirror facet orientations asynchronously of the telescope drive system, and thus makes the method easy to integrate into existing telescopes. It can be combined with remote facet actuation, but does not require one to work. Furthermore, it can reconstruct all individual mirror facet point spread functions without moving any mirror. We present alignment results on the 4 m First Geiger-mode Avalanche Cherenkov Telescope (FACT).     

大口径离轴非球面镜预应力环抛方法研究

提出了一种加工离轴非球面的预应力环抛方法,基于预应力加工方法的基本原理,利用环抛机来磨制离轴非球面.设计了一套专门的加载装置,将拼接镜面中具有不同离轴量的非球面子镜转化成曲率半径相同的球面子镜进行磨制,可以在同一台环抛机上进行抛光.利用这种方法,花费连续40 h的时间,磨制了一块按照中国30 m极大口径望远镜(CFGT)主镜参数比例缩小的离轴抛物面,顶点曲率半径21.6 m,离轴量3.6 m,离轴口径为330 mm,最大非球面度为16μm.试验表明该方法效率高,适用于批量加工,特别是极大口径天文望远镜拼接主镜的大批量非球面子镜研制.     

Regular and chaotic dynamics in 3D reconnecting current sheets

We consider the possibility of particles being injected at the interior of a reconnecting current sheet (RCS), and study their orbits by dynamical systems methods. As an example we consider orbits in a 3D Harris type RCS. We find that, despite the presence of a strong electric field, a 'mirror' trapping effect persists, to a certain extent, for orbits with appropriate initial conditions within the sheet. The mirror effect is stronger for electrons than for protons. In summary, three types of orbits are distinguished: (i) chaotic orbits leading to escape by stochastic acceleration, (ii) regular orbits leading to escape along the field lines of the reconnecting magnetic component, and (iii) mirror-type regular orbits that are trapped in the sheet, making mirror oscillations. Dynamically, the latter orbits lie on a set of invariant KAM tori that occupy a considerable amount of the phase space of the motion of the particles. We also observe the phenomenon of 'stickiness', namely chaotic orbits that remain trapped in the sheet for a considerable time. A trapping domain, related to the boundary of mirror motions in velocity space, is calculated analytically. Analytical formulae are derived for the kinetic energy gain in regular or chaotic escaping orbits. The analytical results are compared with numerical simulations.     

一种新型轻量化反射镜结构及其在空间望远镜相关跟踪摆镜上的应用研究

本文提出一种新的反射镜轻量化方案。此方案在结构特征和减重比例上接近蜂窝结构,减重效果比背面开孔的镜子和拱形镜要好得多;同时又可避免蜂窝镜的制造难度。另外,本文还就此方案在空间太阳望远镜(SST)的相关跟踪摆镜上的应用进行探讨,给出了主要结构参数和镜面变形分析结果,其结果表明,此轻量化平面镜能满足SST的使用要求。     

The Wave-Front Correction System for the Sunrise Balloon-Borne Solar Observatory

This paper describes the wave-front correction system developed for the Sunrise balloon telescope, and it provides information about its in-flight performance. For the correction of low-order aberrations, a Correlating Wave-Front Sensor (CWS) was used. It consisted of a six-element Shack??C?Hartmann wave-front sensor (WFS), a fast tip-tilt mirror for the compensation of image motion, and an active telescope secondary mirror for focus correction. The CWS delivered a stabilized image with a precision of 0.04?arcsec (rms), whenever the coarse pointing was better than ???45?arcsec peak-to-peak. The automatic focus adjustment maintained a focus stability of 0.01?waves in the focal plane of the CWS. During the 5.5?day flight, good image quality and stability were achieved during 33?hours, containing 45?sequences, which lasted between 10 and 45?min.