河南信阳地区的变形珍珠云母

我们发现于信阳地区的珍珠云母是我国的首例原生钙质云母、该区的珍珠云母和白色云母与十字石都呈残斑共生于变余糜棱岩中,这表明它们是含珍珠云母的十字石云母片岩糜棱岩化后的变余矿物。据矿物共生组合推测这些珍珠云母形成于较深位的角闪岩相区域变质作用中。     

我国的首例原生珍珠云母

珍珠云母,这种二八面体层状硅酸盐矿物,以前只知它们常见于富铝矿床中70年代中后期,方知它们是低至中级变质岩中并不少见的一类标准变质岩矿物,可是至今在我国的变质岩石学研究中却很少报道。我们研究的珍珠云母首先见于河南信阳地区,它是我国变质岩中的首例原生珍珠云母。信阳地区的珍珠云母产于时代有争议的信阳群龟小组变余糜棱岩中。珍珠云母在变余糜棱岩中呈鱼形残斑定向分布,并有复杂褶皱发育。和珍珠云母同期共生的矿物还有多硅白云母,十字石,石榴石和石英。前三者也多为变形残斑,石墨则为珍珠云母和白色云母中的包体,石     

宽坪群区域变质作用特征

宽坪群沿华北地台南缘呈近东西向展布,是北秦岭构造带中元古界以云母石英片岩、绿片岩和石英大理岩为主体的一套中浅变质岩系。原岩分别为类复理石沉积、拉斑玄武岩和浅海相富硅、镁碳酸盐岩。因主要经受中晚元古期中压区域动力热流变质作用,形成自南向北递增变质带,即低绿片岩相—高绿片岩相—低角闪岩相。低绿片岩相包括绿泥石带和黑云母带。高绿片岩相和低角闪岩相分别由铁铝榴石带和十字石—蓝晶石带构成。各变质带在贫钙和富钙岩石的主要矿物组合是:绿泥石带Ser+Chl+Qz,Ac+Ab+Chl+Qz;黑云母带Bi+Ms+Chl+Pl+Qz,Ab+Ac+Ep+Chl+Bi+Qz;铁铝榴石带Ala+Bi+Ms+Pl+Qz,Hb+Bi+Pl+Qz;十字石—蓝晶石带Bi+Ald+Ser+Ds+Ms+Qz。宽坪群原岩建造反映其形成于平行大陆边缘的海槽内,因处于两个一级构造单元的接合部位,可能具有板块边界性质。地慢上升热流和应力变形是引起区域变质作用的主要因素。     

俄罗斯白海活动带Uzkaya Salma地区含绿纤石榴辉岩的岩石学特征及其变质演化

俄罗斯白海活动带Uzkaya Salma地区榴辉岩中发现的绿纤石形成于榴辉岩化早期亚绿片岩相阶段。该绿纤石多以包体形式存在于退变榴辉岩的变斑晶石榴石矿物中,并与榍石、金红石、单斜辉石、绿泥石、绿帘石、石英等矿物伴生,极少量单颗粒绿纤石包裹在基质单斜辉石(透辉石)矿物中,呈浑圆状。绿纤石成分上属于铝绿纤石和铁绿纤石,其中以铝绿纤石为主。在详细的岩相学研究基础上,通过相平衡计算,结合矿物温压计计算结果,发现含绿纤石榴辉岩共经历了4阶段的变质演化:Ⅰ早期进变质阶段,以石榴石中的绿纤石+绿泥石+绿帘石+石英等矿物包裹体为特征,依据实验岩石学研究的矿物组合绿纤石+绿泥石+石英和铁绿纤石+绿帘石稳定域,估算该变质阶段温压条件t=160~320℃,p=0.2~0.8 GPa;Ⅱ峰期榴辉岩相阶段,矿物组合为石榴石+Di-Pl后成合晶推测的绿辉石+金红石±角闪石+石英,石榴石核部镁等值线和绿辉石硬玉分子等值线限定其峰期温压条件为t=725~740℃,p=1.4~1.5 GPa;Ⅲ高压麻粒岩相退变质阶段,矿物组合为石榴石+透辉石+角闪石+斜长石+石英,石榴石-单斜辉石温度计和后成合晶中斜长石钙等值线限定该阶段的温压条件t=725~750℃,p=1.1~1.3 GPa;Ⅳ晚期角闪岩相退变质阶段,矿物组合角闪石+斜长石±黑云母+石英,相平衡计算和角闪石-斜长石温度计限定温压条件为t=670~700℃,p=0.7~0.9 GPa。综上,确定了俄罗斯白海活动带Uzkaya Salma地区含绿纤石榴辉岩具有顺时针的p-T演化轨迹,峰期对应的地温梯度为15℃/km,俯冲进变质阶段经历了绿纤石-绿帘石相变质,由峰期榴辉岩相到退变质高压麻粒岩相具近等温降压的特征。研究表明,板块的"冷"俯冲作用在地球演化早期太古宙时期就可能出现了。     

点苍山-哀牢山变质杂岩带变沉积岩的变质演化

点苍山-哀牢山变质杂岩带位于青藏高原东南缘大理-元江-元阳-河口一带,出露规模达数百千米,是扬子板块和印支陆块之间的一条重要构造带.该变质杂岩带主要由各类正片麻岩、副片麻岩、大理岩所组成,夹有斜长角闪岩、石榴辉石岩和超镁铁质岩石的透镜体或团块.其中,变沉积岩如含夕线石和蓝晶石的片麻岩类岩石保存了多阶段的矿物组合及异常复杂的矿物相转变关系.详细的岩相学、成因矿物学以及矿物相转变关系分析表明,变沉积岩系经历了早期进变质阶段(M1)、峰期角闪-麻粒岩相变质阶段(M2)、峰后近等温减压(脱水熔融)阶段(M3)以及晚期退变质阶段(M4)的变质演化.其中,M1阶段的稳定矿物组合为石榴石+斜长石+白云母+石英+十字石±蓝晶石±黑云母±钾长石,M2阶段的稳定矿物组合为石榴石+黑云母+蓝晶石/夕线石+斜长石+石英、石榴石+黑云母+斜长石+石英±钾长石±夕线石,M3阶段的共生矿物组合为石榴石+黑云母+夕线石+斜长石+石英,M4阶段的矿物组合为黑云母+白云母+斜长石+石英±钾长石±石榴石等.通过传统GB-GASP温压计和二云母温度计的估算结果,配合P-T视剖面定量计算,确定早期进变质阶段(M1)的温压条件为T=560 ～ 590℃,P=5.5 ～6.3kb,峰期角闪-麻粒岩相阶段(M2)的温压条件为T=720～ 760℃、P=8.0～9.3kb,峰后近等温减压阶段(M3)的温度压力条件为T=640～760℃,P=5.0～7.3kb,晚期退变阶段(M4)的温压条件为T=521～648℃,P=4.0～5.0kb.上述研究结果表明,点苍山-哀牢山变沉积岩记录了典型碰撞造山带型式的顺时针P-T演化轨迹,表明点苍山-哀牢山变质杂岩带的形成与印度板块和欧亚板块之间的俯冲-碰撞存在密切的成因关系.     

沂水杂岩中变泥砂质岩石的岩石化学特征及年代

含夕线石十字石榴二云斜长片麻岩是沂水杂岩中首次发现的一种少见的变泥砂质岩石,包裹于沂水生心官庄岩浆杂岩体中,为残留的变质表壳岩透镜体,它经历了两期变质作用的改造.早期高角闪岩相变质与区域麻粒岩相变质有关,峰期矿物共生组合主要为:石榴子石(中心域)+黑云母±白云母+斜长石+石英,M1峰期变质温压条件为:T=660±10℃,P=5.7±0.3kb;晚期角闪岩相变质矿物共生组合为:十字石+石榴子石(边部域)+黑云母±白云母+斜长石±夕线石+石英,以形成大量自形-半自形十字石和具有明显的成分环带的石榴子石为特征,晚期石榴子石的形成由核部→边部经历了一降温降压过程,石榴子石核部:T=650±10℃,P=7.7±0.5Kb,石榴子石边部:T=578±10℃,P=4.7±0.1kb;晚期变质作用早期(石榴子石成核)阶段与埋深导致的部分熔融有关,晚期石榴子石生长阶段与岩浆热事件有关.锆石SHRIMP U-Pb定年结果表明:碎屑锆石不一致线上交点年龄为2695±32Ma,代表变泥砂质岩石源区岩浆岩的结晶年龄,变泥砂质岩石的早期变质变质作用年龄小于此值;晚期变质作用年龄为2537±5Ma.     

钦杭结合带加里东期榴闪岩超高压变质作用研究

对钦杭结合带首次发现的加里东期榴闪岩进行了详细的年代学、矿物学和变质作用研究。结果表明,榴闪岩的变质时代为454±4Ma,经历了早期角闪岩相进变质、中期榴辉岩相峰期变质和晚期角闪岩相退变质三个阶段,具顺时针P-T-t轨迹。早期角闪岩相进变质作用阶段的矿物共生组合为角闪石+斜长石+石英,温压条件分别为719℃~795℃和7.56Kpa~8.30Kpa;中期榴辉岩相峰期变质作用阶段的矿物共生组合为石榴子石+绿辉石(后期退变为透辉石+钠长石)±石英,温压条件分别为668℃~821℃和26.42Kpa~33.46Kpa;晚期角闪岩相退变质作用阶段的矿物共生组合为石榴子石+角闪岩+斜长石±石英(即榴闪岩),相应的温压条件分别为611℃~854℃和4.76Kpa~9.30Kpa。结合前人资料推断,区域内加里东期可能经历了榴辉岩相超高压变质→高温麻粒岩相退变质→角闪岩相退变质的演化过程。钦杭结合带首次厘定出加里东期超高压变质作用,表明华夏和扬子两大陆块碰撞拼合发生在加里东期。     

拉萨地块林芝杂岩体含十字石石榴角闪岩的岩石学和变质过程研究

在拉萨地块林芝杂岩体中新发现的石榴角闪岩矿物组合为石榴子石、角闪石、十字石、绿泥石、斜长石、钠云母以及少量的钛铁矿和磷灰石。石榴角闪岩中石榴石核部富锰(Xsps=0.12~0.15)贫铁(Xalm=0.45~0.50)而石榴子石边部相对贫锰(Xsps=0.01~0.03)富铁(Xalm=0.60~0.65),表明石榴子石的核部和边部分别形成于变质作用两个不同阶段。从核部到边部,镁铝榴石升高而钙铝榴石降低,表现为进变质环带特征,这表明石榴子石核部形成于进变质过程。生长在不同的变质阶段的角闪石具有不同的成分特征,作为变质基性岩中罕见的富铝矿物,十字石的结构特征记录了不同变质阶段的信息,结合石榴石的成分和结构特征,为相平衡模拟研究其P-T演化过程提供了可能。我们利用Perplex相图模拟软件在Mn-NCKMASHO体系中模拟出该石榴角闪岩的视剖面图,利用石榴子石边部镁铝榴石和钙铝榴石含量等值线确定出石榴角闪岩峰期温压为:610~630oC,12×105~13×105k Pa,对应峰期矿物组合为石榴子石,角闪石,十字石和白云母。同时结合十字石保存的退变信息得到该石榴角闪岩经历了一个顺时针的变质演化轨迹。     

四川米易前寒武纪低压变质地体的初步研究

米易变质地体主要由变泥质岩、变碳酸盐岩及变基性岩组成。除小部分地区发生了混合岩化作用,经历了高级变质作用外,它们分别经历了绿片岩相和角闪岩相的变质作用。角闪岩相的变质温压条件为600—700℃和3000—4000bar。另外,根据矿物组合和矿物化学的研究,变泥质岩可分为绿泥石、黑云母-石榴石、红柱石和夕线石四个带。所有的证据表明该变质地体是一个典型的前寒武纪低压型前进变质地体。     

苏鲁超高压榴辉岩的石榴石生长成分环带及变质作用P—T轨迹

在南苏鲁东海地区，部分超高压榴辉岩中的变斑晶石榴石具有复杂的生长成分环带和多期矿物包体组合，它们记录了超高压变质岩的多阶段变质演化过程，即绿帘角闪岩相进变质、柯石英榴辉岩相峰期变质、石英榴辉岩相和角闪岩相退变质作用。运用相关的地质温、压计，使用代表最高变质温度的变斑晶石榴石慢部（具最低的Fe／Mg比值）和与其平衡的绿辉石包体成分，获得了〉900℃和4．1～4．5GPa的超高压变质务件。联合其他变质阶段的温、压条件，一个顺时针的变质作用P—T轨迹得以建立。它的特征是进变质与退变质路径近于平行，早期退变质作用为降温、降压过程．榴辉岩石榴石生长成分环带的保存说明超高压变质岩在峰期变质阶段有非常短暂的停留时间，并以很快的折返速率抬升到地壳浅部，超高压变质岩折返过程中的明显降温是石榴石生长环带得以保存的另一个有利条件，     

Wavelength-dispersive X-ray fluorescence spectrometric determination of Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites

Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours.     

硅酸盐类样品中硅、铁、铝、钛、锰、钙、镁、钾、钠和磷的x射线荧光光谱测定

本文拟定了一种以熔融法制备样片,用X射线荧光光谱测定硅酸盐类样品中Si、Fe、Al、Tj、Mn、Ca、Mg、K、Na、P等元素的分析方法。在对不同靶材X光管和分光晶体实验对比的基础上,选择了最佳的测量条件。该法具有快速、准确,测量范围广,检测限低,价格便宜等优点。经过近百个各种类型标样或管理样品的分析对比表明,本法不仅适用于硅酸盐类岩石样品的分析,还适用于铁矿、铝土矿、碳酸盐类岩矿样品以及水泥、耐火材料等样品的分析。     

高压微波消解法测定醋酸纤维过滤器采集的微尘粒子中的砷镉钴铬铜铁锰镍铅钒锌

最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提     

Isotopic systematics of He,Ar, S,Cu, Ni,Re, Os,Pb, U,Sm, Nd,Rb, Sr,Lu, and Hf in the rocks and ores of the Norilsk deposits

This paper reports the first results of a study of 11 isotope systems (³He/⁴He, ⁴⁰Ar/³⁶Ar, ³⁴S/³²S, ⁶⁵Cu/⁶³Cu, ⁶²Ni/⁶⁰Ni, ⁸⁷Sr/⁸⁶Sr, ¹⁴³Nd/¹⁴⁴Nd, ^206–208Pb/²⁰⁴Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others.     

Viscous, cohesive, non-Newtonian, depositing, radial slurry flow

Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance.     

硅酸盐中铁、锰、钛、钙、钾、磷、硅、铝、镁、钠、锶、铷、钡的X-射线荧光光谱定量测定

本文介绍样品经四硼酸锂熔融制成玻璃小饼。采用Lachance模式和理论a系数来校正元素间的效应,由3080E型X-射线荧光谱仪和DF-350B数据处理系统完成硅酸盐中十三个项目的测定。     

岩石密度和超高压岩石折返速率

在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。     

Bellechester,Minnesota, USA,lagoon collapses

Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×10⁶ 1 of partially treated effluent and about 600 m³ of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes.     

Mercury,arsenic, antimony,and selenium contents of sediment from the Kuskokwim River,Bethel, Alaska,USA

The Kuskokwim River at Bethel, Alaska, drains a major mercury-antimony metallogenic province in its upper reaches and tributaries. Bethel (population 4000) is situated on the Kuskokwim floodplain and also draws its water supply from wells located in river-deposited sediment. A boring through overbank and floodplain sediment has provided material to establish a baseline datum for sediment-hosted heavy metals. Mercury (total), arsenic, antimony, and selenium contents were determined; aluminum was also determined and used as normalizing factor. The contents of the heavy metals were relatively constant with depth and do not reflect any potential enrichment from upstream contaminant sources.     

滇东南花岗岩与锡、银、铜、铅、锌多金属矿床的成因关系

滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床.