Identifying key environmental and building features affecting the outcome of a seismic event: a case study of the “921” earthquake

Natural Hazards - Major earthquakes in a given location are unpredictable, infrequent, and often fatal. Using data from a previous earthquake disaster, this study explores the relationship between...     

Fractal variogram-based time–space of aftershock sequences analysis—case study: the May 21, 2003 Boumerdes–Algeria earthquake, M w = 6.8

The most of shallow earthquakes are followed, just after the main shock, by increased residual seismicity known as “aftershocks” or “aftershock sequences”. Because of their disparity in time and space, aftershock sequences are more or less obvious and their productivity is spread out in time. Several studies have been regularly proposed to explain or to understand the mechanisms of the occurrence and the behaviour of these small earthquakes. In a theoretical context, many factors can induce the aftershock triggering: residual friction, subcritical crack growth, pore fluid flow etc. Just after the occurrence of the most destructive main shock of the 21 May 2003 Boumerdes (Algeria) earthquake, a wide sequence of aftershocks was recorded at different geographical locations and with various magnitudes. Based on the fact that the region of Boumerdes (40 km east of the capital Algiers) did not develop major earthquakes in the past, a geostatistical investigation of the data for this aftershock sequence is a valuable input for better seismogeological identification of this area. In the present analysis, after an overview of the geological factors in the likely occurrence of the earthquake, fundamental statistical parameters were chosen: the b value from the Gutenberg–Richter law, the p factor of the extracted respectively from the b value and the fractal variogram defined as a graphic tool to describe the continuity or the roughness of data. Jointly to the geostatistical parameters provided by the variogram like the fractal dimension. The main objective of the calculation and interpretation of these parameters is oriented towards a better understanding of the seismicity of the region of Boumerdes (Algeria) now classified as seismogenic zone.     

Religious belief and Tibetans’ response to earthquake disaster: a case study of the 2010 Ms 7.1 Yushu earthquake,Qinghai Province,China

Natural Hazards - Based on data from a questionnaire survey about the 2010 Ms 7.1 Yushu earthquake in Qinghai Province, China, this study examines the impacts of belief in Tibetan Buddhism on...     

Crustal structure of the Alpine–Pannonian transition zone: a combined seismic and gravity study

 The crustal structure of the transition zone between the Eastern Alps and the western part of the Pannonian depression (Danube basin) is traditionally interpreted in terms of subvertical Tertiary strike-slip and normal faults separating different Alpine tectonic units. Reevaluation of approximately 4000-km-long hydrocarbon exploration reflection seismic sections and a few deep seismic profiles, together with data from approximately 300 wells, suggests a different structural model. It implies that extensional collapse of the Alpine orogene in the Middle Miocene was controlled by listric normal faults, which usually crosscut Alpine nappes at shallow levels, but at depth merge with overthrust planes separating the different Alpine units. The alternative structural model was tested along a transect across the Danube basin by gravity model calculations, and the results show that the model of low-angle extensional faulting is indeed viable. Regarding the whole lithosphere of the western Pannonian basin, gravity modelling indicates a remarkable asymmetry in the thickness minima of the attenuated crust and upper mantle. The approximately 160 km lateral offset between the two minima suggests that during the Miocene extension of the Pannonian basin detachment of the upper crust from the mantle lithosphere took place along a rheologically weak lower crust. Received: 13 July 1998 / Accepted: 18 March 1999     

Comparing the performance of base map scales in GIS-based avalanche simulation: a case study from Palandöken,Turkey

Snow avalanches are very complex and dynamic events that cause serious risk to human lives, infrastructure, and facilities in mountain environments. In this study, GIS-based avalanche simulations were investigated in terms of base map scale over the simulation sensitivity. Study area consisted of the avalanche region from Sultanseki Hill to Hodaklar Hill near the Palandöken skiing site in Erzurum, eastern part of Turkey. In analysis, 1:1,000 (field surveying), 1:5,000 (orthophoto) and 1:25,000 (standard topographic maps) scaled maps were used as base maps. The avalanche simulation was constructed by Triangulated Irregular Network (TIN) extracted from the base maps by using GIS-based ELBA+ simulation model. When 1:1,000-scaled map results were taken as reference simulations at 1:25,000-scaled maps, the best results for the potential area affected by avalanche and the maximum run-out distance were provided. Besides, using 1:5,000-scaled maps showed close correlation with the maximum track width, velocity, flow height, and pressure.     

Assessment of water quality for drinking and irrigation purposes: a case study of Başköy springs (Ağlasun/Burdur/Turkey)

It is important to know the quality of water resources for drinking, domestic and irrigation in the rural area. Because, in recent times, there has been increased demand for water due to population growth and intense agricultural activities, so, hydrogeochemical investigations come into prominence for the groundwater use. The purpose of this paper is to evaluate water quality of Ba?köy springs for both drinking and irrigation purposes. The geochemical processes and quality of springs were followed as seasonal in the study area. In view of geochemical classification, springs are Ca-Mg-HCO₃ water type for both seasons. Comparison of geochemical data shows that majority of the spring samples are suitable for drinking water. On the other hand, chemical indexes of springs with various classifications were calculated for irrigation purposes. According to the classifications (electrical conductivity, total dissolved solids, total hardness, salinity hazard, percent sodium, sodium adsorption ratio, residual sodium carbonate, residual sodium bicarbonate, permeability index, potential salinity, soluble sodium percentage, magnesium ratio, and Kelly’s ratio), Ba?köy springs are suitable for irrigation purposes. However, water quality of Çaygözü spring is different the other springs due to the high electrical conductivity and total dissolved solids. Also, groundwater mineralization processes and rock–water interaction are controlled with bivariate diagrams of major elements.     

Pseudo- and real-inverted metamorphism caused by the superposition and extrusion of a stack of nappes: a case study of the Southern Brasília Orogen,Brazil

International Journal of Earth Sciences - The Southern Brasília Orogen is a Neoproterozoic belt that occurs along the southernmost border of the São Francisco Craton where the...     

Effects of temperature on the crystal structure of epidote: a neutron single-crystal diffraction study at 293 and 1,070 K

The effects of temperature on the crystal structure of a natural epidote [Ca_1.925 Fe_0.745Al_2.265Ti_0.004Si_3.037O₁₂(OH), a = 8.890(6), b = 5.630(4), c = 10.150(6) Å and β = 115.36(5)°, Sp. Gr. P2₁ /m] have been investigated by means of neutron single-crystal diffraction at 293 and 1,070 K. At room conditions, the structural refinement confirms the presence of Fe³⁺ at the M₃ site [%Fe(M3) = 73.1(8)%] and all attempts to refine the amount of Fe at the M(1) site were unsuccessful. Only one independent proton site was located. Two possible hydrogen bonds, with O(2) and O(4) as acceptors [i.e. O(10)–H(1)···O(2) and O(10)–H(1)···O(4)], occur. However, the topological configuration of the bonds suggests that the O(10)–H(1)···O(4) is energetically more favourable, as H(1)···O(4) = 1.9731(28) Å, O(10)···O(4) = 2.9318(22) Å and O(10)–H(1)···O4 = 166.7(2)°, whereas H(1)···O(2) = 2.5921(23) Å, O(10)···O(2) = 2.8221(17) Å and O(10)–H(1)···O2 = 93.3(1)°. The O(10)–H(1) bond distance corrected for “riding motion” is 0.9943 Å. The diffraction data at 1,070 K show that epidote is stable within the T-range investigated, and that its crystallinity is maintained. A positive thermal expansion is observed along all the three crystallographic axes. At 1,070 K the structural refinement again shows that Fe³⁺ share the M(3) site along with Al³⁺ [%Fe(M3)_1,070K = 74(2)%]. The refined amount of Fe³⁺ at the M(1) is not significant [%Fe(M1)_1,070K = 1(2)%]. The tetrahedral and octahedral bond distances and angles show a slight distortion of the polyhedra at high-T, but a significant increase of the bond distances compared to those at room temperature is observed, especially for bond distances corrected for “rigid body motions”. The high-T conditions also affect the inter-polyhedral configurations: the bridging angle Si(2)–O(9)–Si(1) of the Si₂O₇ group increases significantly with T. The high-T structure refinement shows that no dehydration effect occurs at least within the T-range investigated. The configuration of the H-bonding is basically maintained with temperature. However, the hydrogen bond strength changes at 1,070 K, as the O(10)···O(4) and H(1)···O(4) distances are slightly longer than those at 293 K. The anisotropic displacement parameters of the proton site are significantly larger than those at room condition. Reasons for the thermal stability of epidote up to 1,070 K observed in this study, the absence of dehydration and/or non-convergent ordering of Al and Fe³⁺ between different octahedral sites and/or convergent ordering on M(3) are discussed.     

Asbestiform and non-asbestiform morphologies in a talc and vermiculite mine from the province of Córdoba (Argentina): a case study

In this work, a talc and vermiculite mine from the province of Córdoba (Argentina) was investigated with special emphasis on the occurrence of asbestiform and non-asbestiform phases. The meta-ultramafic rock was studied by a multimethodological approach, complementing field studies with petrographic-mineralogical, compositional and morphological analyses. Samples were examined by stereomicroscopy, polarizing light microscopy, SEM–EDS, XRD, DSC-TGA and FTIR. Complementary, compositional and textural analyses were performed with FE-SEM–EDS and EPMA. Talc-rich veins with a laminar and fibrous appearance were at first recognized. However, the fibrous morphology observed both in the field and by microscopy is due to an apparent habit because of the sample orientation. To avoid erroneous interpretations, studies by secondary electron images (SEM) are fundamental to carrying out this type of analysis. Tremolite was identified in different zones of the outcrop; however, only ~40% of the crystals located in the vermiculite zone have dimensions to be considered as asbestiform fibres in the range of respirable particles. In these types of complex deposits affected by superimposed metamorphic, igneous and deformational events, multimethodological approaches are necessary to develop models of occurrence of asbestiform morphologies that may be applicable to other with similar characteristics.     

Magnetic susceptibility and VLF-R investigations for determining geothermal blowout contaminated area: a case study from Alaşehir (Manisa/Turkey)

Western Turkey is one of the most spectacular regions of widespread, active continental extension in the world. The most prominent structures of this region are E–W trending Gediz and Büyük Menderes Grabens. Geothermal activity around city of Manisa in Gediz Graben has been investigated by many researchers and many geothermal boreholes were drilled in order to produce electricity. In the middle of May 2012, a geothermal blowout occurred 150 m away from the deep drilling (depth 1,100 m), in Alkan village of Ala?ehir resort in city of Manisa. After that, four big blowouts took place at the same area and thermal water had been diverted to Alkan stream for almost 4 months. The boron (B) and Fe levels of thermal water are 87 and 11.2 ppm where the background B and Fe values of topsoil vary between 0.2–1.5 ppm and 3.08–5.63 ppm, respectively. The objective of this study was to utilize joint magnetic susceptibility and VLF-R investigations to determine possibly contaminated area with B, related to high Fe level on the topsoil and thermal water in the subterranean layers. It is observed that magnetic susceptibility values vary between 500 and 790 cgs (×10^?6) in the vicinity of blowouts and 150–340 cgs (×10^?6) at a distance of 50 m around, where the background average value is 20 cgs (×10^?6), by using the data collected at 346 stations. Besides, the VLF-R studies were carried out along 18 profiles at three different frequencies. Laterally constrained two-layer inversion was applied to each station; in addition to the inversion of all profiles for each frequency, all lines were stacked, 2-D resistivity maps were obtained, and the contaminated area was determined approximately as 35,000 m². The results show not only satisfactory agreement between magnetic susceptibility and VLF-R data, but also provide fast and valued interpretation of geochemical and geophysical properties of the geothermal contaminated area.     

Lithosphere thermal structure at the eastern margin of the Bohemian Massif: a case petrological and geophysical study of the Nied?wied? amphibolite massif (SW Poland)

The crustal section beneath amphibolite Nied?wied? Massif (Fore-Sudetic Block in NE Bohemian Massif), modelled on the basis of geological and seismic data, is dominated by gneisses with subordinate granites (upper and middle crust) and melagabbros (lower crust). The geotherm was calculated based on the chemical analyses of the heat-producing elements in the rocks forming the crust and the measurements of their density and heat conductivity. The results were verified by heat flow calculations based on temperature measurements from 1,600?m deep well in the Nied?wied? Massif and by temperature–depth estimates in mantle xenoliths coming from the nearby ca. 4.5?My basanite plug in Lutynia. The paleoclimate-corrected heat flow in the Nied?wied? Massif is 69.5?mW?m^?2, and the mantle heat flow is 28?mW?m^?2. The mantle beneath the Massif was located marginally relative to the areas of intense Cenozoic thermal rejuvenation connected with alkaline volcanism. This results in geotherm which is representative for lithosphere parts located at the margins of zones of continental alkaline volcanism and at its waning stages. The lithosphere–asthenosphere boundary (LAB) beneath Nied?wied? is located between 90 and 100?km depth and supposedly the rheological change at LAB is not related to the appearance of melt.     

Trends and relationships in victims’ recovery perceptions: a case study of the recovery process following the Great East Japan Earthquake

Natural Hazards - In the aftermath of a disaster, the recovery process has long-term, multi-dimensional, and interactive aspects. To clarify the recovery conditions and victims’ perceptions...     

Assessing the vulnerability of social–environmental system from the perspective of hazard,sensitivity, and resilience: a case study of Beijing,China

Despite a recent increase in the number of vulnerability analyses there has been relatively little discussion of vulnerability assessment of social–environment system, especially when they face multiple hazards. In this study, we developed an applicable and convenient method to assess vulnerability of social–environment system at a regional scale. Vulnerability is quantified by measuring three critical elements (i.e. hazards, sensitivity, and resilience) through some key variables. The results showed that vulnerability is high in Miaofeng Mountain in Mengtougou District, the hills of Pinggu County and the riparian zones of the lower courses of the Beiyun and Yongding Rivers; but low in the city of Beijing and the southwestern part of the Fangshan District. Areas of very high, high, medium, and low-vulnerability account for 6.19, 25.48, 33.06, and 35.27% of the total area, respectively. The degree of vulnerability decreases in a northwest direction in mountainous areas and declines from watercourses to riparian zones along a lateral direction in the plain. Some adaptive strategies are also proposed.     

Water quality and risk assessment of dug wells: a case study for a poor community in the city of São Paulo, Brazil

Sparsely populated areas, or peripheral communities commonly lack access to a public water supply and sewerage systems. The inhabitants of these areas must make use of excavated wells to provide their water needs, and cesspits for domestic wastewater disposal. These on-site sanitation systems can release pathogens and nutrients into shallow groundwater. These poor communities urgently require cheap and efficient techniques for the detection of sanitary conditions, in order to prevent contamination of the water resources supplied by dug wells. The sanitary risk assessment methodology, applied in an irregular settlement south of the city of São Paulo, was based on a questionnaire with yes/no questions (risk factors), which allowed the identification of problems related to the well construction and operation, and the presence of potential contamination sources in its vicinity. These risk factors were compared against nitrate and bacterial analysis using the clustering statistical method, to verify the relationship between contamination and certain aspects surveyed in the questionnaire. Questions that were more related to contaminated wells were those concerning the presence of cover and its integrity; gaps between mouth and cover; the surrounding pavement and presence of ground irregularities; infiltration in the well casing; water-suspended materials; and proximity to contamination sources. Contamination models based on variograms allowed to observe that bacterial contamination presented a strong localized component, which was associated frequently with the way residents handled the wells, whereas nitrate contamination was related more to a regional (spatial) component; that is, the distance between wells and cesspits.     

Sedimentary processes,stratigraphic sequences and middens: the link between archaeology and geoheritage—a case study from the Quaternary of the Broome region,Western Australia

The cliffed and active dune coastal region of Broome provides an excellent record of Pleistocene and Holocene stratigraphy of desert environments interfacing with the Indian Ocean. The Mesozoic Broome Sandstone is the basal stratigraphic unit in the area and is overlain by Pleistocene red desert quartz sand (Mowanjum Sand). Modern coastal processes of waves, wind and tide have resulted in distinctive sedimentary bodies (stratigraphic units) clearly linked to the sedimentary environment. The Mowanjum Sand, reworked by coastal winds, generates the landward-ingressing orange quartzose Churchill Sand, or reworked by waves and abraded to white sand with the addition of carbonate grains that form the beaches (Cable Beach Sand) and with eolian action, coastal dunes or inland-ingressing white dunes (Shoonta Hill Sand). These sedimentary bodies and stratigraphic units form a template with which to locate and interpret archaeological middens and Indigenous occupation over the past 5000?years in a context of coastal occupation, coastal stability, mean sea-level changes, climate changes, and availability of marine food and freshwater. Shell middens and stone artefacts form definitive layers or horizons in relation to the stratigraphy, in places in situ, and elsewhere reworked as sheets and plumes; understanding their inter-relationships has enabled the unravelling of the archaeological history and relating Indigenous occupation to biofacies and lithofacies. The array of sedimentary, biofacies and stratigraphic units are of national geoheritage significance in their own right. The addition of archaeological deposits as stratigraphic units provides a link between geoheritage and archaeology, where the archaeological materials are viewed as part of the complex stratigraphic story, part of the coastal history, and part of the geoheritage story.