Sequence of till deposition and erosion in drumlins

Whittecar, G.R. & Mickelson, D. M. 1977 06 01: Sequence of till deposition and erosion in drumlins.
Extensive sand and gravel workings have exposed structural and compositional features of 17 gravel-cored drumlins of late Wisconsin age in eastern Wisconsin. The drumlins are blanketed by 3 m of sandy basal till which truncates lower tills of earlier advanccs, outwash gravels, and an overlying till which is conformable to the gravel bedding and indistinguishable in composition from the surface till. Sands and gravels in the interior of some drumlins are deformed into large overturned folds, and into elastic dikes of fine sand and silt which penetrate to the top of the drumlin and warp overlying gravels. Both the folds and horizontal bedding are truncated by either the drumlin edge or the till blanket.
We interpret the conformable, truncated, and in some cases folded, till as a basal till deposited during glacial advance. The capping, truncating till is viewed as a basal till left by retreating ice.
The following sequence of events is suggested: (1) advance of ice over outwash, and deposition of till in a zone mar the margin; (2) thickening of the ice and erosion of the drumlin shapes; (3) local folding of the gravels and continued erosion; (4) retreat of ice and deposition of basal till under thin ice; (5) deposition of localized ablation till and stratified deposits.     

Distribution and genesis of tills in central south Norway

The morphogenesis of tills below the culmination zones of the Weichsclian inland ice has been studied an an upland area with a relief of 1500 m. The thickness of the tills varies considerably, depending principally on gee-morphology, ice-movement directions, and glaciofluvial drainage during the last deglaciation period. The thickest tills, found in valleys, accumulated in three ways. Glaciofluvial/lacustrine sediments of prcsumed Mid-Weichselian age have been discovered beneath the tills at niorc than 10 localities. The overlying tills are correlated with different phases of ice movement reconstructed on the basis of detailed studies of stt-iae. The till stratigraphy of one locality, Stenseng, is described in detail. Based upon combined analyses of texture, structure, and fabric, four different hasal tills are recognized, each corresponding to a particular ice direction. A characteristic boulder layer represents a change in thc direction of glacial movement. Boulder layers in till are thought to he essential for the development of earth pillars.     

Stratigraphy and sedimentology of Devensian (Dimlington Stadial) glacial deposits,east Yorkshire,England

The stratigraphy and sedimentology of the glacial deposits exposed along the coast of east Yorkshire are reviewed. Critical sections at Filey Brigg, Barmston and Skipsea are examined to reassess the stratigraphy of Devensian Dimlington Stadial glacial deposits in the light of recent developments in glacial sedimentology. Sedimentary and glaciotectonic structures studied in the field and by using scanning electron microscopy are emphasised. Two hypotheses are considered for the genesis of the interbedded diamictons and stratified sediments. The first involves the deposition of lodgement till and/or deformation till followed by meltout till, which was overridden to produce more deformation till, reflecting periods of ice stagnation punctuated by glacier thickening. The second hypothesis, which is favoured on the basis of field evidence and micromorphology, involves the vertical accretion of a deforming till layer associated with cavity/channel or tunnel valley fills, beneath active ice. At Barmston the upper part of the diamicton contains elongate pendant structures containing gravels, indicating that the diamicton was saturated and able to flow. The diamictons, therefore, represent a complex sequence of tills deposited and deformed by active ice during the Dimlington Stadial. Previously published stratigraphical schemes involving classifications of multiple tills in east Yorkshire should be simplified and it is more appropriate to assign these to a single formation, the Skipsea Till Formation. Rhythmic glaciolacustrine and proglacial glaciofluvial sediments overlie the tills at Barmston and Skipsea. These were deposited in sag basins during deglaciation as the tills settled and deformed under thickening sediment and as buried ice melted out. Extensive sands and gravels cap the succession and were deposited on a sandur during the later stages of deglaciation.     

Interlobate ice-sheet dynamics during the Last Glacial Maximum at Whitburn Bay, County Durham, England

This research reconstructs ice-sheet processes operating during the Late Devensian in northeast England. The article assesses the lithostratigraphy of the Devensian glacial tills of Whitburn Bay, eastern County Durham, and presents the first detailed analysis of petrological, geochemical and biostratigraphical data to reconstruct lithostratigraphy, provenance and iceflow pathways. Two Devensian tractions tills (the Blackhall and Horden tills) are separated by a boulder pavement, pointing to a switch in ice-bed conditions and the production of a melt-out lag prior to deposition of the upper traction till, the Horden Till. The Blackhall Till contains Magnesian Limestone, Carboniferous Limestone, Whin Sill dolerite and Old Red Sandstone, suggesting a northwesterly source, probably from the Midland Valley and the Southern Uplands. The Horden Till contains erratics and heavy minerals derived from crystalline bedrock sources in the Cheviot Hills and northeast Scotland. Within the Horden Till are numerous sand, clay and gravel-filled canals incised downwards into the diamicton which are attributed to a low-energy, distributed, subglacial canal drainage system. Coupled with hydro-fractures and the boulder pavement, this suggests that a partially decoupled, fast-flowing ice stream deposited the Horden Till. The uphill, landward direction of ice movement indicates that the ice stream was confined in the North Sea Basin, possibly by the presence of Scandinavian Ice.     

Characterization of pebble fabrics in modern terrestrial glacigenic sediments

ABSTRACT Pebble fabric data are available from several facies of glacigenic sediments deposited by modern glaciers, where sedimentary processes can be observed or inferred with relatively little ambiguity. Over 100 samples from contemporary environments illustrate fabrics characterizing melt-out till, deformed and undeformed lodgement till, sediment flow deposits and ice slope colluvium. Lodgement till fabric variability is related to the two-layer structure of these sediments; a structureless, friable upper layer with low shear strength and high consolidation coefficient, overlying a very compact material of horizontal platy structure. Fabric strength (assessed by eigenvalue analysis) is weaker and pebble dip is more dispersed in the upper structureless horizon. Stronger fabrics in the lower platy horizon may be primary depositional fabrics which are destroyed by subglacial shearing to give weaker fabrics in the upper horizon. Alternatively, upper horizon fabrics may be characteristic of all recently-deposited lodgement tills, with stronger fabrics developing at depth by dewatering and consolidation. There is a general reduction in fabric strength and an increase in particle dip associated with the transition from melt-out tills, through undeformed and deformed lodgement tills, to sediment flow deposits and ice slope colluvium. There is, however, considerable overlap in the fabric strengths characteristic of sediment flow deposits and deformed lodgement tills. Fabric data from modern glacial sedimentary facies are used to assist in interpreting the mode of deposition of some Quaternary glacial sediments. Relatively strong fabrics characteristic of melt-out tills and undeformed lodgement tills are more likely to be diagnostic of genesis than weaker fabrics associated with deformed sediments.     

Early middle Pleistocene glacial sediments (780000-620000 BP) near Kansas City, northeastern Kansas and northwestern Missouri, USA

Two lithologically distinct tills are present near the pre-Illinoian glacial boundary in northeastern Kansas and northwestern Missouri. The tills are probably early middle Pleistocene (780 000-620 000 BP) based on normal polarity and their stratigraphic relationship to dated terraces. The upper till is sandier than the lower till and contains more expandable clay minerals and less illite than the lower till. Glaciofluvial and supraglacial sediments are preserved between the tills, yet palaeosols, or other evidence of an interglacial, are not present, suggesting that the tills were deposited during a single glaciation. Southeasterly and southwesterly trending striae and till fabric suggest that the glacial succession was deposited by at least two fluctuations (phases) of a lobe, which probably advanced down the axis of the present Missouri River lowland. These tills probably correlate to early middle Pleistocene tills in southwestern Iowa and eastern Nebraska, although it is possible that the lower till may correlate to even older tills in these areas.     

Comparative study of striations and basal till clast fabrics, Malpeque—Bedeque region, Prince Edward Island, Canada

Coastal erosion has resulted in exposure of a succession of basal till deposits and striation localities along the Malpeque and Bedeque Bays, PEI, Canada, permitting repetitive determinations of clast fabrics and investigation of recently exhumed striations. Striations indicate initial eastward ice flow, followed by a second glacial event with flow towards the south and southwest from the Gulf of St. Lawrence. The degree of local inconsistency and the variations with striation assemblages indicate that the orientations of individual striations cannot be regarded as 'absolute' indicators of ice flow directions. Diamictons identified as basal tills using sedimentological criteria have clast fabrics typical of basal till deposition. Local deviations of fabric trend within individual outcrops are common. A comparative analysis of the data obtained from striation and clast fabric orientations indicates that the ice flow directions independently suggested by each are in general agreement. Differences are present between the orientations of striations and clast fabrics at individual sites. The orientations of the fabrics lie within 20° of the modal striation orientations in only 28% of the cases, and the median deviation between the suggested ice flow directions was 29°. In 40%, of the cases, the azimuth deviation between the two methods exceeded 40°, and the maximum deviation recorded was 84°. At many sites, the deviations are so severe as to potentially result in the misinterpretation of the modal ice flow direction, based on the use of either striation orientation or clast fabric in isolation. Variations in glacial flow can readily produce striations and clast fabrics which record different phases of glacial activity associated with the same glacial event at an individual site.     

Till in the marine environment

Till is of common occurrence in the marine environment and can be both subglacial and proglacial in origin. Former glacial margins are often represented by till tongues, that are interbedded with stratified glaciomarine sediment, and the relationship is readily mappable using seismic reflection techniques. It is inferred that within individual till tongues, sediment-gravity flow deposits form transitional contacts with till of subglacial origin, but these contacts cannot be distinguished on seismic profiles. These unstratified, gravity-induced deposits formed in close proximity to the glacial source at the grounding line are considered to be secondary tills (flow-till complex) in terms of the INQUA classification of tills. Till-tongue successions and till deltas are large, ice-marginal depocentres associated with floating front ice-margins, and appear to be closely related in origin. Tabular and hummocky moraines of the mid-Norwegian Shelf also are considered to be products of floating-front margins and represent a large proportion of the retreat tills formed during ice recession. Seismostratigraphic evidence for channelisation in ice-marginal deposits appears to provide a means of distinguishing between former tidewater and floating-front margins.     

Depositional processes of Pleistocene lowland end Moraines, and their possible relation to climatic conditions

Three kinds of end moraines, depending most probably on climatic conditions affecting depositional environments, are characterized: (1) fluvioglacial end moraines - built of gravels and sands froming fans superimposed on one another, and accumulated by abundant melt water during intense melting of an ice front in a comparatively warm environment; (2) 'Glacial' end moraines - built of flow tills accumulated during slow melting in a comparatively cold environment; and (3) fluvioglacial-and-glacial end moraines, the most widespread ones in Polish lowlands – built of fluvioglacial stratified gravels and sands and of glacial 'flow' deposits; zones of considerable prevalence of glacial deposits over fluvioglacial ones may probably point to comparatively cold stages during deposition, and vice versa. The question of deposition of end moraines in distal and proximal direction, and their geological and geomorphological features is also briefly discussed.     

Subglacial bed conditions during Late Pleistocene glaciations and their impact on ice dynamics in the southern North Sea

Passchier, S., Laban, C., Mesdag, C.S. & Rijsdijk, K.F. 2010: Subglacial bed conditions during Late Pleistocene glaciations and their impact on ice dynamics in the southern North Sea. Boreas, Vol. 39, pp. 633–647. 10.1111/j.1502‐3885.2009.00138.x. ISSN 0300‐9483. Changes in subglacial bed conditions through multiple glaciations and their effect on ice dynamics are addressed through an analysis of glacigenic sequences in the Upper Pleistocene stratigraphy of the southern North Sea basin. During Elsterian (MIS 12) ice growth, till deposition was subdued when ice became stagnant over a permeable substrate of fluvial sediments, and meltwater infiltrated into the bed. Headward erosion during glacial retreat produced a dense network of glacial valleys up to several hundreds of metres deep. A Saalian (MIS 6) glacial advance phase resulted in the deposition of a sheet of stiff sandy tills and terminal moraines. Meltwater was at least partially evacuated through the till layer, resulting in the development of a rigid bed. During the later part of the Saalian glaciation, ice‐stream inception can be related to the development of a glacial lake to the north and west of the study area. The presence of meltwater channels incised into the floors of glacial troughs is indicative of high subglacial water pressures, which may have played a role in the onset of ice streaming. We speculate that streaming ice flow in the later part of the Saalian glaciation caused the relatively early deglaciation, as recorded in the Amsterdam Terminal borehole. These results suggest that changing subglacial bed conditions through glacial cycles could have a strong impact on ice dynamics and require consideration in ice‐sheet reconstructions.     

Configuration,history and impact of the Norwegian Channel Ice Stream

The Norwegian Channel between Skagerrak, in the southeast, and the continental margin of the northern North Sea, in the northwest, is the result of processes related to repeated ice stream activity through the last 1.1 m yr. In such periods the Skagerrak Trough (700 m deep) has acted as a confluence area for glacial ice from southeastern Norway, southern Sweden and parts of the Baltic. Possibly related to the threshold in the Norwegian Channel off Jæren (250 m deep), the ice stream, on a number of occasions over the last 400 ka, inundated the coastal lowlands and left an imprint of NW‐oriented ice directional features (drumlins, stone orientations in tills and striations). Marine interstadial sediments found up to 200 m a.s.l. on Jæren have been suggested to reflect glacial isostasy related to the Norwegian Channel Ice Stream (NCIS). In the channel itself, the ice stream activity is evidenced by mega‐scale glacial lineations on till surfaces. As a result of subsidence, the most complete sedimentary records of early phases of the NCIS are preserved close to the continental margin in the North Sea Fan region. The strongest evidence for ice stream erosion during the last glacial phase is found in the Skagerrak. On the continental slope the ice stream activity is evidenced by the large North Sea Fan, which is mainly a result of deposition of glacial‐fed debris flows. Northwards of the North Sea Fan, rapid deposition of meltwater plume deposits, possibly related to the NCIS, is detected as far north as the Vøring Plateau. The NCIS system offers a unique possibility to study ice stream related processes and the impact the ice stream development had on open ocean sedimentation and circulation.     

Sedimentology of glacial and glacial marine deposits on the George V-Adelie continental shelf, East Antarctica

Mineralogic and textural data suggest that glacial ice derived from the region of the present day Cook Ice Shelf extended to the edge of the d'Urville Sea continental shelf. As part of this glacial maximum, basal tills and glacial marine sediments were deposited over an irregular subglacial surface. Extensive redeposition of eroded material took place in the middle and outer portions of the continental shelf. Retreat of glacial ice was relatively rapid and was associated with widespread deposition of a thin residual glacial marine unit and turbidity current deposits in the far western and eastern parts of the region. Today, sedimentation on the continental shelf of the d'Urville Sea is controlled by biogenic and physical oceanographic processes. Deposition of ice-rafted detritus from icebergs undoubtedly occurs but is relatively insignificant. Glacial advances along this periphery of East Antarctica appear to the regulated by adjacent outlet glaciers rather than direct advance of the grounded ice sheet.     

Comparative scanning electron microscopy study of oriented till blocks, glacial grains and Devonian sands in Estonia and Latvia

Samples of Middle Devonian (Eifelian age; 387–380 Ma) indurated and non‐cemented sandstone were compared with Pleistocene basal tills in Estonia and Latvia to test a hypothesis that glacial SEM (scanning electron microscopy) microtextures are distinctly different from those produced in a fluvial depositional environment. The deposits of Middle Devonian Aruküla Stage were emplaced in a continental water basin close to sea level and well away from any glacial source. Therefore, the SEM microtextures on quartz grains from the Aruküla Stage should show mainly the effect of stream transport. The basal tills are of Late Weichselian age deposited as ground moraine directly over the sandstone. Additional glaciofluvial and glaciolacustrine samples were included with the tills to determine whether glacial and fluvial‐lacustrine transport could be differentiated by the SEM microtextures. Samples of oriented blocks of till from a limited number of sites were studied without pretreatment to determine whether sand clast orientation could provide a method for determining glacial flow vectors. While there are some microtextural similarities between grains from glacial and glaciofluvial‐lacustrine depositional environments, the vast majority of grains from till deposits (50%–60%) are faceted, sharp edged, angular to subangular, and comprised of numerous and distinct microfeatures including abraded surfaces over microfractures, deep linear and curved troughs (striations), step features, and a preponderance of conchoidal and linear microfractures. Glaciofluvial and lacustrine grains contain abundant abrasion features and v‐shaped percussion cracks that make them very distinct from glacial grains. Fluvial transport produces primarily rounded grains, well abraded, with v‐shaped percussion scars dominating. Thus, it is possible to use microtextural differences between the three sample suites to identify particular depositional environments. Oriented till blocks provide information on sand clast orientation. Although carbonate coatings often obscure sand clasts in untreated blocks, it is possible to determine some microfabric information that can be useful in determining flow direction of the ice.     

Pleistocene sediments of the eastern Barents Sea (Central Deep and Murmansk Bank): Communication 2. Lithological composition and formation conditions

Llithology of massive diamictons was studied in two areas of the eastern Barents Sea using cores and geophysical data. These sediments dominate in the Pleistocene section as two seismostratigraphic complexes (SSC): Upper Weichselian (SSC III) and locally distributed Lower Weichselian (SSC V). Diamictons of these complexes represent tills produced by the geological activity of the Pleistocene Novaya Zemlya and Scandinavian ice sheets. The Upper Weichselian glacial sequence is laterally heterogeneous. It includes two seismic facies represented by ordinary (overconsolidated) tills (they also constitute SSC V) and a spacious moraine of the specific type with the normally consolidated sediments (they avoided compaction by the ice load) and certain lithological specifics. The last glacial sediments were formed in a specific subglacial setting similar to the sediments under fast ice streams of Antarctica. However, the specific features allow us to define these sediments as a new (Barents Sea) facies of tills related to zones of intense basal melting of glaciers.     

Facies model for sedimentation in the glaciolacustrine environment

Diamictons which have characteristics of both basal tills and lacustrine sedimenis have been called by various authors waterlaid tills, lacuatrotills, subaqueous tills, aqualills, underwater tills, and other terms with the word till replaced by moraine. It is proposed that a more restrictive definition of these terms be applied based on criteria indicative of the environment of deposition.
The term lacustrotill is proposed for the till-like sediments deposited in the lacustrine environment by flow mechanisms. Their clasts are often striated and may exhibit preferred orientation unrelated to glacier movement. Deformation structures suggestive of slumping or flowage during deposition are usually present.
The term waterlaid till is proposed for sediments deposited beneath a floating glacier, where the water depth does not allow appreciable size separation during settling: glacial drift dumped in standing water at the snout of a glacier grounded on a lake bottom: or till deposited during re advances (perhaps annually) into a lake basin and subsequently slightly reworked by lacustrine processes.
These sediments contain glacially abraded clasts which may even show a weak preferred orientation related to glacial movement; deformation and flow structures will not normally be present: and they may he massive, or exhibit crude stratification.     

Structures and textures in till indicating subglacial deposition

Five structural and textural features are discussed: (1) small lenses of sorted material, (2) smudges, (3) small-scale deformations of till matrix and smudges by clasts, (4) clasts consistently striated, and (5) clasts with stoss-and-lee sides. Analyses suggest that these features may be produced by subglacial processes acting in the ice-bed interface. Long axes of small sand lenses and smudges as well as the striation on the upper surface of scattered clasts in lodgement till have a strong preferred orientation in good agreement with the glacier flow direction as indicated by clast fabrics, bedrock striation, and surface fluting of ground moraine. When in traction against the till bed, clasts may plough up till banks. Clasts with stoss-and-lee sides development were also very distinctly oriented as their stoss sides faced significantly up-glacier.
It is concluded (1) that each of the five features discussed is useful as a criterion for subglacial deposition by lodgement, (2) that they indicate important differential movement along the ice-bed interface and therefore suggest a temperate regime in this part of the glacier during the till deposition, (3) that very few orientation measurements of one or more of these features signify the ice movement direction; i.e. a time-saving method to find the paleoflow direction of Pleistocene glaciers, and (4) that taken together with till preconsolidation, mechanical composition, and clast fabric, they may support each other and give good indications of the genesis of Pleistocene tills.     

Till body morphology and structure related to glacier flow

Tills are described which occur in ridges and mounds arranged both parallel and transverse to the flow direction of the depositing glacier. Field localities are drawn from the English Midlands, Western Canada, and South Victoria Land, Antarctica. The tills retain textural and structural properties associated with glacial transport, and have suffered a minimum of redistribution suhsequent to their release from glacier ice. It is shown that ridges and mounds cannot he explained in terms of preferential till accretion. An alternative mechanism is presented in which form and structurc are a result of redistribution of debris in transport by secondary flows in ice.
Flutings are longitudinal forms which are related to helicoidal flow cells. Fabric distributions, patterns of till thickness, and internal structure support the helicoidal flow hypothesis.
Debris entrainment by Antarctic cold-based glaciers is explained by consideration of the morphology and sedimentology of the ice margin and the pattern of glacier flow. Deposition by sublimation and melt-out produces an upwards succession of (1) undisturbed proglacial deposits; (2) a complex of poorly sorted flow deposits intercalated with sorted and stratified water-lain deposits; (3) foliated till with sub-horizantal jointing and isolated clasts. A section shobbing this succession is described from Taylor Valley, Antarctica.
Transverse asymmetric ridges are related to till stacking by over-folding in the marginal compressive zone of cold-based glaciers. Plastic deformation of the debris-laden ice may be enhanced by incorporated salts. The folding process is illustrated by structures within Taylor glacier, and is used to explain Pleistocene landforms and structures in Shropshirc, England and Taylor Valley, Antarctica.     

Ice-marginal sedimentary, glacitectonic, and morphologic features of Pleistocene drift: An example from Newfoundland

A Pleistocene drift sequence in hummocky terrain along part of the southern Avalon Peninsula of Newfoundland is interpreted to comprise complexly interrelated lodgement till, melt-out till, flow till, supraglacial and proglacial outwash, and supraglacial rhythmites. The gray and tan melt-out tills are stacked in imbricate fashion, giving rise to exceptionally thick stratigraphic sections. Contacts between melt-out tills are interpreted as remnants of shear planes because they are sharp, they dip in the up-ice direction, and they converge toward valley margins. Overlying flow tills interdigitate with supraglacial outwash. The drift sequence was deposited during a single episode of glaciation, rather than by repeated glacier advance, as previously proposed. It is the product of thrusting of englacial debris along ice-marginal shear planes, subsequent melting-out of englacial debris, and formation of supraglacial flow till and outwash. Preservation of this sequence probably is due to high content of englacial debris within the Wisconsinan ice. The sedimentary, glacitectonic, and morphologic features of this sequence are similar to those found at the margins of certain Arctic glaciers of subpolar thermal regime which have recently been the subject of Pleistocene glacial sedimentation models for west-central Canada and Great Britain. Recognition of these distinct elements indicates wisconsinan glacier lobes were of the cold Arctic type in southeastern Newfoundland. Alternative explanations for this sequence, such as deposition by glaciers of temperate thermal regime or by surging glaciers, are discounted. Because the features described here are complex and difficult to recognize, they may be more widespread in Pleistocene drift than has previously been interpreted.     

Late Wisconsinan glaciation models of northern Maine and adjacent Canada

Surficial stratigraphic units of Aroostook County, Maine, have been mapped and formal stratigraphic names for these units are proposed. Evidence exists for at least two distinct glacial phases which are represented by three tills. Two of these tills were deposited penecontemporaneously either as the result of coalescing ice sheets or as the result of the thermal regime existing within a single ice sheet. The oldest till is named the St. Francis and is correlated with the Chaudière Till of southeastern Quebec. The other tills are named the Mars Hill and Van Buren tills, respectively, and are correlated with the Lennoxville till of southeastern Quebec. Interbedded stratified sediments associated with the St. Francis till are correlated with the Gayhurst Formation. Stratified sediments associated with Van Buren and Mars Hill tills are correlated with post Lennoxville sediments of Quebec. Granite-gneiss erratics of Canadian Shield provenance in the Van Buren till indicate advance of the Laurentide ice into northern Maine during late Wisconsinan time. Moraines in southern Aroostook County with associated outwash and eskers record general recession from coastal Maine. Recession occurred after the formation of the Pineo Ridge moraine in Maine and the St. Antonin-Highland Front moraine complex in Quebec. The Caribou-Winterville moraine complex in northern Maine marks the boundary between the penecontemporaneously deposited Van Buren and Mars Hill surface tills and is correlated with the Grand Falls moraine at Grand Falls, New Brunswick.     

Eemian-Weichselian stratigraphy of the Flakkerhuk ridge, southern Jameson Land, East Greenland

The coast-parallel Flakkerhuk ridge on southern Jameson Land revealed a succession of four marine formations separated by tills and glaciotectonic deformation zones representing glacier advances. Paleontological evidence. supported by 32 luminescence datings, indicates that deposition took place during the Eemian and Early Weichselian. A pronounced rise in sea-level due to glacio-isostatic depression is evidenced within the Late Eemian part of the sequence, indicating buildup of ice commencing while interglacial conditions still prevailed. A diamicton interpreted as a till deposited by a glacier moving from the interior of Jameson Land and overlying the interglacial deposits would seem to suggest the presence of a local ice cap on Jameson Land at the last interglacial/glacial transition. Three ice advances from the fjord onto the coast were identified following the last interglacial. The glaciers at no time advanced beyond 2–3 km inland from the coast in the investigated area. This demonstrates that the glaciers advancing through the Scoresby Sund fjord during the Weichselian were relatively thin, with a low longitudinal gradient. Glacier advances onto the coast were apparently strongly influenced by local topography and relative sea-level. The Flakkerhuk ridge is mainly an erosional landform originating from continued fluvial downcutting of former drainage channels from along the Early Weichselian ice margin. Only the very top of the ridge is considered to he a constructional ice marginal ridge, related to the Flakkerhuk glaciation.