Hydrological evaluation of the LPX dynamic global vegetation model for small river catchments in the UK

Assessments of water resources by using macro‐scale models tend to be conducted at the continental or large catchment scale. However, security of freshwater supplies is a local issue and thus necessitates study at such a scale. This research aims to evaluate the suitability of the Land Processes and eXchanges dynamic global vegetation model (LPX‐DGVM) for simulating runoff for small catchments in the UK. Simulated annual and monthly runoff is compared against the National River Flow Archive streamflow observations from 12 catchments of varying size (500–10 000 km²) and climate regimes. Results show that LPX reproduces observed inter‐annual and intra‐annual runoff variability successfully in terms of both flow timings and magnitudes. Inter‐annual variability in flow timings is simulated particularly well (as indicated by Willmott's index of agreement values of ≥0.7 for the majority of catchments), whereas runoff magnitudes are generally slightly overestimated. In the densely populated Thames catchment, these overestimations are partly accounted for by water consumption. Seasonal variability in runoff is also modelled well, as shown by Willmott's index of agreement values of ≥0.9 for all but one catchment. Absence of river routing and storage from the model, in addition to precipitation uncertainties, is also suggested as contributing to simulated runoff discrepancies. Overall, the results show that the LPX‐DGVM can successfully simulate runoff processes for small catchments in the UK. This study offers promising insights into the use of global‐scale models and datasets for local‐scale studies of water resources, with the eventual aim of providing local‐scale projections of future water distributions. Copyright © 2013 John Wiley & Sons, Ltd.     

Predicting Aquifer Response Time for Application in Catchment Modeling

It is well established that changes in catchment land use can lead to significant impacts on water resources. Where land‐use changes increase evapotranspiration there is a resultant decrease in groundwater recharge, which in turn decreases groundwater discharge to streams. The response time of changes in groundwater discharge to a change in recharge is a key aspect of predicting impacts of land‐use change on catchment water yield. Predicting these impacts across the large catchments relevant to water resource planning can require the estimation of groundwater response times from hundreds of aquifers. At this scale, detailed site‐specific measured data are often absent, and available spatial data are limited. While numerical models can be applied, there is little advantage if there are no detailed data to parameterize them. Simple analytical methods are useful in this situation, as they allow the variability in groundwater response to be incorporated into catchment hydrological models, with minimal modeling overhead. This paper describes an analytical model which has been developed to capture some of the features of real, sloping aquifer systems. The derived groundwater response timescale can be used to parameterize a groundwater discharge function, allowing groundwater response to be predicted in relation to different broad catchment characteristics at a level of complexity which matches the available data. The results from the analytical model are compared to published field data and numerical model results, and provide an approach with broad application to inform water resource planning in other large, data‐scarce catchments.     

Change in low flows due to catchment management dynamics—Application of a comparative modelling approach

Understanding the natural low flow of a catchment is critical for effective water management policy in semi-arid and arid lands. The Geba catchment in Ethiopia, forming the headwaters of Tekeze-Atbara basin was known for its severe land degradation before the recent large scale Soil and Water conservation (SWC) programs. Such interventions can modify the hydrological processes by changing the partitioning of the incoming rainfall on the land surface. However, the literature lacks studies to quantify the hydrological impacts of these interventions in the semi-arid catchments of the Nile basin. Statistical test and Indicators of Hydrological Alteration (IHA) were used to identify the trends of streamflow in two comparatives adjacent (one treated with intensive SWC intervention and control with fewer interventions) catchments. A distributed hydrological model was developed to understand the differences in hydrological processes of the two catchments. The statistical and IHA tools showed that the low flow in the treated catchment has significantly increased while considerably decreased in the control catchment. Comparative analysis confirmed that the low flow in the catchment with intensive SWC works was greater than that of the control by >30% while the direct runoff was lower by >120%. This implies a large proportion of the rainfall in the treated catchment is infiltrated and recharge aquifers which subsequently contribute to streamflow during the dry season. The proportion of soil storage was more than double compared to the control catchment. Moreover, hydrological response comparison from pre- and post-intervention showed that a drastic reduction in direct runoff (>84%) has improved the low flow by >55%. This strongly suggests that the ongoing intensive SWC works have significantly improved the low flows while it contributed to the reduction of total streamflow in the catchment.     

SWAT模型在斯里兰卡河流径流预测中的运用

本文运用SWAT模型和新安江模型对斯里兰卡卡鲁河流域上游地区日径流进行了预测.卡鲁河是斯里兰卡的第二大河,由于流域的降雨量很大,上游地区河流沿峡谷流下,中下游平原地区河床平坦.卡鲁河流域的洪水变的很正常.应用SWAT模型来对卡鲁河的日径流量进行预测,并同应用新安江模型所得到的结果做对比.研究表明,新安江模型要比SWAT (分布式水文模型)模型在卡鲁河日径流量预测上稍微好一些.实际上,或许数据质量不高或不恰当是部分原因,因为SWAT的输出成果严格取决于其输入的数据质量.此外,在斯里兰卡,许多人的日常用水是靠井水.当把流域看作一个整体,通常都是一个很大的范围,那样的话就不可能详尽的记录所有各个小规模的水利用,例如:小灌溉、小规模的家畜管理和工业水利用.这些水利用累积起来或许就很可观.这些数据的缺失对分布式水文模型在水平衡的应用有着独特的影响.但是概念水文模型(如新安江模型)可以根据实际情况在校正中调节它的参数,因为这些参数并没有实质的物理含义.因此,在流域特征和模型输入数据有限或不完整的情况下,概念水文模型比分布式水文模型更具优势.     

DEM-based numerical modelling of runoff and soil erosion processes in the hilly–gully loess regions

For sake of improving our current understanding on soil erosion processes in the hilly–gully loess regions of the middle Yellow River basin in China, a digital elevation model (DEM)-based runoff and sediment processes simulating model was developed. Infiltration excess runoff theory was used to describe the runoff generation process while a kinematic wave equation was solved using the finite-difference technique to simulate concentration processes on hillslopes. The soil erosion processes were modelled using the particular characteristics of loess slope, gully slope, and groove to characterize the unique features of steep hillslopes and a large variety of gullies based on a number of experiments. The constructed model was calibrated and verified in the Chabagou catchment, located in the middle Yellow River of China and dominated by an extreme soil-erosion rate. Moreover, spatio-temporal characterization of the soil erosion processes in small catchments and in-depth analysis between discharge and sediment concentration for the hyper-concentrated flows were addressed in detail. Thereafter, the calibrated model was applied to the Xingzihe catchment, which is dominated by similar soil erosion processes in the Yellow River basin. Results indicate that the model is capable of simulating runoff and soil erosion processes in such hilly–gully loess regions. The developed model are expected to contribute to further understanding of runoff generation and soil erosion processes in small catchments characterized by steep hillslopes, a large variety of gullies, and hyper-concentrated flow, and will be beneficial to water and soil conservation planning and management for catchments dealing with serious water and soil loss in the Loess Plateau.     

A model for distributed GIUH‐based flow routing on natural and anthropogenic hillslopes

Attempts to reduce the number of parameters in distributed rainfall–runoff models have not yet resulted in a model that is accurate for both natural and anthropogenic hillslopes. We take on the challenge by proposing a distributed model for overland flow and channel flow based on a combination of a linear response time distribution and the hillslope geomorphologic instantaneous unit hydrograph (GIUH), which can be calculated with only a digital elevation model and a map with field boundaries and channel network as input. The spatial domain is subdivided into representative elementary hillslopes (REHs) for each of which we define geometric and flow velocity parameters and compute the GIUH. The catchment GIUH is given by the sum of all REH responses. While most distributed models only perform well on natural hillslopes, the advantage of our approach is that it can also be applied to modified hillslopes with for example a rectangular drainage network and terrace cultivation. Tests show that the REH‐GIUH approach performs better than classical routing functions (exponential and gamma). Simulations of four virtual hillslopes suggest that peak flow at the catchment outlet is directly related to drainage density. By combining the distributed flow routing model with a lumped‐parameter infiltration model, we were also able to demonstrate that terrace cultivation delays the response time and reduces peak flow in comparison to the same hillslope, but with a natural stream network. The REH‐GIUH approach is a first step in the process of coupling distributed hydrological models to erosion and water quality models at the REH (associated with agricultural management) and at the catchment scale (associated with the evaluation of the environmental impact of human activities). It furthermore provides a basis for the development of models for large catchments and urban or peri‐urban catchments. Copyright © 2013 John Wiley & Sons, Ltd.     

MODELLING RAINFALL-RUNOFF FROM LARGE CATCHMENT TO BASIN SCALE: THE GOULBURN VALLEY,VICTORIA

A lumped parameter dynamic rainfall-runoff model, IHACRES, is applied to the large upland area (more than 4500 km²) of the Goulburn Valley Basin, Victoria, Australia to predict streamflow under different climatic conditions. This paper presents the first evaluation of a rainfall–runoff model at large catchment scale, which is comprehensive in terms of the number of catchments investigated and the number of calibration and simulation periods used. The basin is subdivided into 12 catchments (from 100 to 700 km²), each of which is calibrated separately. High values of model efficiency and low bias are consistently obtained for different calibration sub-periods for all catchments in the basin. Simulation or so-called validation tests are used to select the best models for each catchment. This allows simulation of the water regime during long historical (approximately 90 year) periods when only climatological (rainfall and temperature) data were available. This procedure is extremely important for the estimation of the effect of climate variability and of the possible impact of climate change on the hydrological regime in the region and, in particular, for supporting irrigation management of the basin. Analysis of a composite catchment (2417 km²) and its five separate subcatchments indicates that the information content in the rainfall–streamflow data is independent of catchment size. Dynamic modelling of the daily water balance at the macroscale is limited principally by the adequacy of the precipitation gauging network. When a good estimate of areal precipitation is available for a catchment, it is not necessary to consider subcatchment-scale variability for modelling if the only interest is the daily discharge and evaporation losses from the catchment.     

Travel Time Distributions Derived from Particle Tracking in Models Containing Weak Sinks

A travel time distribution based on a particle-tracking analysis in a ground water model containing weak sinks is often uncertain because whether a particle is discharged or allowed to pass through a weak sink is unresolved by particle-tracking theory. We present a probability-based method to derive an objective travel time distribution in models containing weak sinks. The method discharges a fraction of the particle at the weak sink and allows the remaining fraction to pass through the weak sink. The weight of the discharged fraction depends on the ratio of the sink flux to the influx into the weak sink cell. We tested this approach on a coarse (100 × 100 m) and a fine (25 × 25 m) horizontal resolution regional scale ground water model (34.5 × 24 km). We compared the travel time distributions in a small subcatchment derived from particle-tracking analysis with one derived from a transport model. We found that the particle-tracking analysis with the coarse model underestimated the travel time distribution of the catchment compared to the transport solution or a particle-tracking analysis with the fine model. The underestimation of travel times with the coarse model was a result of a large area covered by sink cells in this model and the more accurate flow patterns simulated by the fine model. The probability-based method presented here compares favorably with a solute transport solution and provides an accurate travel time distribution when used with a fine-resolution ground water model.     

Modelling runoff using optical satellite remote sensing data in a high mountainous alpine catchment of Italy

Development of hydrological models for seasonal and real-time runoff forecast in rivers of high alpine catchments is useful for management of water resources. The conceptual models for this purpose are based on a temperature index and/or energy budget and can be either lumped or distributed over the catchment area. Remote sensing satellite data are most useful to acquire near real-time geophysical parameters in order to input to the distributed forecasting models. In the present study, integration of optical satellite remote sensing-derived information was made with ground meteorological and hydrological data, and predetermined catchment morphological parameters, to study the feasibility of application of a distributed temperature index snowmelt runoff model to one of the high mountainous catchments in the Italian Alps, known as Cordevole River Basin. Five sets of Landsat Multispectral Scanning System (MSS) and Thematic Mapper (TM) computer-compatible tapes (CCTs) were processed using digital image processing techniques in order to evaluate the snow cover variation quantitatively. Digital elevation model, slope and aspect parameters were developed and used during satellite data processing. The satellite scenes were classified as snow, snow under transition and snow free areas. A second-order polynomial fit has been attempted to approximate the snow depletion and to estimate daily snow cover areal extent for three elevation zones of the catchment separately. Model performance evaluation based on correlation coefficient, Nash–Sutcliffe coefficient and percentage volume deviation indicated very good simulation between measured and computed discharges for the entire snowmelt period. The use of average temperature values computed from the maximum and minimum temperatures into the model was studied and a suitable algorithm was proposed. © 1997 John Wiley & Sons, Ltd.     

Fine scale variations of surface water chemistry in an ephemeral to perennial drainage network

Although temporal variation in headwater stream chemistry has long been used to document baseline conditions and response to environmental drivers, less attention is paid to fine scale spatial variations that could yield clues to processes controlling stream water sources. We documented spatial and temporal variation in water composition in a headwater catchment (41 ha) at the Hubbard Brook Experimental Forest, NH, USA. We sampled every 50 m along an ephemeral to perennial stream network as well as groundwater from seeps and 35 shallow wells across varying flow conditions. Groundwater influences on surface water in this region have not been considered to be important in past studies as relatively coarse soils were assumed to be well drained in steep catchments with flashy runoff response. However, seeps displayed perennial discharge, upslope accumulated areas (UAA) smaller than those for channel initiation sites and higher pH, Ca and Si concentrations than streams, suggesting relatively long groundwater residence time or long subsurface flow paths not bound by topographic divides. Coupled with a large range in groundwater chemistry seen in wells, these results suggest stream chemistry variation reflects the range of connectivity with, and quality of, groundwater controlled by hillslope hydropedological processes. The magnitude of variations of solute concentrations seen in the first order catchment was as broad as that seen at the fifth order Hubbard Brook Valley (3519 ha). Reduction in variation in solute concentrations with increasing UAA suggested a representative elementary area (REA) value of less than 3 ha in the first order catchment, compared with 100 ha for the fifth order basin. Thus, the REA is not necessarily an elementary catchment property. Rather, the partitioning of variation between highly variable upstream sources and relatively homogenous downstream characteristics may have different physical significance depending on the scale and complexity of the catchment under examination. Copyright © 2012 John Wiley & Sons, Ltd.     

Predicting dry‐season flows with a monthly rainfall–runoff model: Performance for gauged and ungauged catchments

Hydrologic models are useful to understand the effects of climate and land‐use changes on dry‐season flows. In practice, there is often a trade‐off between simplicity and accuracy, especially when resources for catchment management are scarce. Here, we evaluated the performance of a monthly rainfall–runoff model (dynamic water balance model, DWBM) for dry‐season flow prediction under climate and land‐use change. Using different methods with decreasing amounts of catchment information to set the four model parameters, we predicted dry‐season flow for 89 Australian catchments and verified model performance with an independent dataset of 641 catchments in the United States. For the Australian catchments, model performance without catchment information (other than climate forcing) was fair; it increased significantly as the information to infer the four model parameters increased. Regressions to infer model parameters from catchment characteristics did not hold for catchments in the United States, meaning that a new calibration effort was needed to increase model performance there. Recognizing the interest in relative change for practical applications, we also examined how DWBM could be used to simulate a change in dry‐season flow following land‐use change. We compared results with and without calibration data and showed that predictions of changes in dry‐season flow were robust with respect to uncertainty in model parameters. Our analyses confirm that climate is a strong driver of dry‐season flow and that parsimonious models such as DWBM have useful management applications: predicting seasonal flow under various climate forcings when calibration data are available and providing estimates of the relative effect of land use on seasonal flow for ungauged catchments.     

Water and salt balance modelling to predict the effects of land-use changes in forested catchments. 1. Small catchment water balance model

A long-term water balance model has been developed to predict the hydrological effects of land-use change (especially forest clearing) in small experimental catchments in the south-west of Western Australia. This small catchment model has been used as the building block for the development of a large catchment-scale model, and has also formed the basis for a coupled water and salt balance model, developed to predict the changes in stream salinity resulting from land-use and climate change. The application of the coupled salt and water balance model to predict stream salinities in two small experimental catchments, and the application of the large catchment-scale model to predict changes in water yield in a medium-sized catchment that is being mined for bauxite, are presented in Parts 2 and 3, respectively, of this series of papers. The small catchment model has been designed as a simple, robust, conceptually based model of the basic daily water balance fluxes in forested catchments. The responses of the catchment to rainfall and pan evaporation are conceptualized in terms of three interdependent subsurface stores A, B and F. Store A depicts a near-stream perched aquifer system; B represents a deeper, permanent groundwater system; and F is an intermediate, unsaturated infiltration store. The responses of these stores are characterized by a set of constitutive relations which involves a number of conceptual parameters. These parameters are estimated by calibration by comparing observed and predicted runoff. The model has performed very well in simulations carried out on Salmon and Wights, two small experimental catchments in the Collie River basin in south-west Western Australia. The results from the application of the model to these small catchments are presented in this paper.     

Delineation of regional arid karstic aquifers: an integrative data approach

This research integrates data procedures for the delineation of regional ground water flow systems in arid karstic basins with sparse hydrogeologic data using surface topography data, geologic mapping, permeability data, chloride concentrations of ground water and precipitation, and measured discharge data. This integrative data analysis framework can be applied to evaluate arid karstic aquifer systems globally. The accurate delineation of ground water recharge areas in developing aquifer systems with sparse hydrogeologic data is essential for their effective long-term development and management. We illustrate the use of this approach in the Cuatrociénegas Basin (CCB) of Mexico. Aquifers are characterized using geographic information systems for ground water catchment delineation, an analytical model for interbasin flow evaluation, a chloride balance approach for recharge estimation, and a water budget for mapping contributing catchments over a large region. The test study area includes the CCB of Coahuila, Mexico, a UNESCO World Biosphere Reserve containing more than 500 springs that support ground water-dependent ecosystems with more than 70 endemic organisms and irrigated agriculture. We define recharge areas that contribute local and regional ground water discharge to springs and the regional flow system. Results show that the regional aquifer system follows a topographic gradient that during past pluvial periods may have linked the Río Nazas and the Río Aguanaval of the Sierra Madre Occidental to the Río Grande via the CCB and other large, currently dry, upgradient lakes.     

Optimization strategies for sediment reduction practices on roads in steep,forested terrain

Many forested steeplands in the western United States display a legacy of disturbances due to timber harvest, mining or wildfires, for example. Such disturbances have caused accelerated hillslope erosion, leading to increased sedimentation in fish‐bearing streams. Several restoration techniques have been implemented to address these problems in mountain catchments, many of which involve the removal of abandoned roads and re‐establishing drainage networks across road prisms. With limited restoration funds to be applied across large catchments, land managers are faced with deciding which areas and problems should be treated first, and by which technique, in order to design the most effective and cost‐effective sediment reduction strategy. Currently most restoration is conducted on a site‐specific scale according to uniform treatment policies. To create catchment‐scale policies for restoration, we developed two optimization models – dynamic programming and genetic algorithms – to determine the most cost‐effective treatment level for roads and stream crossings in a pilot study basin with approximately 700 road segments and crossings. These models considered the trade‐offs between the cost and effectiveness of different restoration strategies to minimize the predicted erosion from all forest roads within a catchment, while meeting a specified budget constraint. The optimal sediment reduction strategies developed by these models performed much better than two strategies of uniform erosion control which are commonly applied to road erosion problems by land managers, with sediment savings increased by an additional 48 to 80 per cent. These optimization models can be used to formulate the most cost‐effective restoration policy for sediment reduction on a catchment scale. Thus, cost savings can be applied to further restoration work within the catchment. Nevertheless, the models are based on erosion rates measured on past restoration sites, and need to be updated as additional monitoring studies evaluate long‐term basin response to erosion control treatments. Copyright © 2006 John Wiley & Sons, Ltd.     

The use of agent based modelling techniques in hydrology: determining the spatial and temporal origin of channel flow in semi‐arid catchments

Information on the spatial and temporal origin of runoff entering the channel during a storm event would be valuable in understanding the physical dynamics of catchment hydrology; this knowledge could be used to help design flood defences and diffuse pollution mitigation strategies. The majority of distributed hydrological models give information on the amount of flow leaving a catchment and the pattern of fluxes within the catchment. However, these models do not give any precise information on the origin of runoff within the catchment. The spatial and temporal distribution of runoff sources is particularly intricate in semi‐arid catchments, where there are complex interactions between runoff generation, transmission and re‐infiltration over short temporal scales. Agents are software components that are capable of moving through and responding to their local environment. In this application, the agents trace the path taken by water through the catchment. They have information on their local environment and on the basis of this information make decisions on where to move. Within a given model iteration, the agents are able to stay in the current cell, infiltrate into the soil or flow into a neighbouring cell. The information on the current state of the hydrological environment is provided by the environment generator. In this application, the Connectivity of Runoff Model (CRUM) has been used to generate the environment. CRUM is a physically based, distributed, dynamic hydrology model, which considers the hydrological processes relevant for a semi‐arid environment at the temporal scale of a single storm event. During the storm event, agents are introduced into the model across the catchment; they trace the flows of water and store information on the flow pathways. Therefore, this modelling approach is capable of giving a novel picture of the temporal and spatial dynamics of flow generation and transmission during a storm event. This is possible by extracting the pathways taken by the agents at different time slices during the storm. The agent based modelling approach has been applied to two small catchments in South East Spain. The modelling approach showed that the two catchments responded differently to the same rainfall event due to the differences in the runoff generation and overland flow connectivity between the two catchments. The model also showed that the time of travel to the nearest flow concentration is extremely important for determining the connectivity of a point in the landscape with the catchment outflow. Copyright © 2007 John Wiley & Sons, Ltd.     

Catchment properties,function, and conceptual model representation: is there a correspondence?

This study investigates the possible correspondence between catchment structure, as represented by perceptual hydrological models developed from fieldwork investigations, and mathematical model structures, selected on the basis of reproducing observed catchment hydrographs. Three Luxembourgish headwater catchments are considered, where previous fieldwork suggested distinct flow‐generating mechanisms and hydrological dynamics. A set of lumped conceptual model structures are hypothesized and implemented using the SUPERFLEX framework. Following parameter calibration, the model performance is examined in terms of predictive accuracy, quantification of uncertainty, and the ability to reproduce the flow–duration curve signature. Our key research question is whether differences in the performance of the conceptual model structures can be interpreted based on the dominant catchment processes suggested from fieldwork investigations. For example, we propose that the permeable bedrock and the presence of multiple aquifers in the Huewelerbach catchment may explain the superior performance of model structures with storage elements connected in parallel. Conversely, model structures with serial connections perform better in the Weierbach and Wollefsbach catchments, which are characterized by impermeable bedrock and dominated by lateral flow. The presence of threshold dynamics in the Weierbach and Wollefsbach catchments may favour nonlinear models, while the smoother dynamics of the larger Huewelerbach catchment were suitably reproduced by linear models. It is also shown how hydrologically distinct processes can be effectively described by the same mathematical model components. Major research questions are reviewed, including the correspondence between hydrological processes at different levels of scale and how best to synthesize the experimentalist's and modeller's perspectives. Copyright © 2013 John Wiley & Sons, Ltd.     

Predicting streamflow distributions and flow duration curves from landscape and climate

Characterizing the probability distribution of streamflows in catchments lacking in discharge measurements represents an attractive prospect with consequences for practical and scientific applications, in particular water resources management. In this paper, a physically-based analytic model of streamflow dynamics is combined with a set of water balance models and a geomorphological recession flow model in order to estimate streamflow probability distributions based on catchment-scale climatic and morphologic features. The models used are described and the novel parameterization approach is elaborated on. Starting from rainfall data, potential evapotranspiration and digital terrain maps, the method proved capable of capturing the statistics of observed streamflows reasonably well in 11 test catchments distributed throughout the United States, east of the rocky mountains. The method developed offers a unique approach for estimating probability distribution of streamflows where only climatic and geomorphologic features are known.     

Predicting catchment sediment yield in Mediterranean environments: the importance of sediment sources and connectivity in Italian drainage basins

Predicting sediment yield at the catchment scale is one of the main challenges in geomorphologic research. The application of both physics‐based models and regression models has until now not provided very satisfying results for prediction of sediment yield for medium to large sized catchments (c. >50 km²). The explanation for this lies in a combination of the large data requirements of most models and a lack of knowledge to describe all processes and process interactions at the catchment scale. In particular, point sources of sediment (e.g. gullies, mass movements), connectivity and sediment transport remain difficult to describe in most models. From reservoir sedimentation data of 44 Italian catchments, it appeared that there was a (non‐significant) positive relation between catchment area and sediment yield. This is in contrast to what is generally expected from the theory of decreasing sediment delivery rates with increasing catchment area. Furthermore, this positive relation suggests that processes other than upland erosion are responsible for catchment sediment yield. Here we explore the potential of the Factorial Scoring Model (FSM) and the Pacific Southwest Interagency Committee (PSIAC) model to predict sediment yield, and indicate the most important sediment sources. In these models different factors are used to characterize a drainage basin in terms of sensitivity to erosion and connectivity. In both models an index is calculated that is related to sediment yield. The FSM explained between 36 and 61 per cent of the variation in sediment yield, and the PSIAC model between 57 and 62 per cent, depending on the factors used to characterize the catchments. The FSM model performed best based on a factor to describe gullies, lithology, landslides, catchment shape and vegetation. Topography and catchment area did not explain additional variance. In particular, the addition of the landslide factor resulted in a significantly increased model performance. The FSM and PSIAC model both performed better than a spatially distributed model describing water erosion and sediment transport, which was applied to the same catchments but explained only between 20 and 51 per cent of the variation in sediment yield. Model results confirmed the hypothesis that processes other than upland erosion are probably responsible for sediment yield in the Italian catchments. A promising future development of the models is by the use of detailed spatially distributed data to determine the scores, decrease model subjectivity and provide spatially distributed output. Copyright © 2006 John Wiley & Sons, Ltd.     

Multi-objective optimization for sustainable groundwater resource management in a semiarid catchment

Abstract

Groundwater is an important water resource and its management is vital for integrated water resources development in semiarid catchments. The River Shiyang catchment in the semiarid area of northwestern China was studied to determine a sustainable multi-objective management plan of water resources. A multi-objective optimization model was developed which incorporated water supplies, groundwater quality, ecology, environment and economics on spatial and temporal scales under various detailed constraints. A calibrated groundwater flow model was supplemented by grey simulation of groundwater quality, thus providing two lines of evidence to use in the multi-objective water management. The response matrix method was used to link the groundwater simulation models and the optimization model. Multi-phase linear programming was used to minimize and compromise the objectives for the multi-period, conjunctive water use optimization model. Based on current water demands, this water use optimization management plan was able to meet ecological, environmental and economic objectives, but did not find a final solution to reduce the overall water deficit within the catchment.     

Controls on old and new water contributions to stream flow at some nested catchments in Vermont,USA

Factors controlling the partitioning of old and new water contributions to stream flow were investigated for three events in four catchments (three of which were nested) at Sleepers River Research Watershed in Danville, Vermont. In the 1993 snowmelt period, two‐component isotopic hydrograph separations showed that new water (meltwater) inputs to the stream ranged widely from 41 to 74%, and increased with catchment size (41 to 11 125 ha) (with one exception) and with open land cover (0–73%). Peak dissolved organic carbon concentrations and relative alkalinity dilution in stream water ranked in the same order among catchments as the new water fractions, suggesting that new water followed shallow flow paths. During the 1994 snowmelt, despite similar timing and magnitude of melt inputs, the new‐water contribution to stream flow ranged only from 30 to 36% in the four catchments. We conclude that the uncommonly high and variable new water fractions in streamwater during the 1993 melt were caused by direct runoff of meltwater over frozen ground, which was prevalent in open land areas during the 1993 winter. In a high‐intensity summer rainstorm in 1993, new water fractions were smaller relative to the 1993 snowmelt, ranging from 28 to 46%, but they ranked in the identical catchment order. Reconciliation of the contrasting patterns of new–old water partitioning in the three events appears to require an explanation that invokes multiple processes and effects, including:

• 1. topographically controlled increase in surface‐saturated area with increasing catchment size;
• 2. direct runoff over frozen ground;
• 3. low infiltration in agriculturally compacted soils;
• 4. differences in soil transmissivity, which may be more relevant under dry antecedent conditions.

These data highlight some of the difficulties faced by catchment hydrologists in formulating a theory of runoff generation at varying basin scales. Copyright © 2002 John Wiley & Sons, Ltd.