Low‐temperature phase decomposition in iron‐nickel metal of the Portales Valley meteorite

Abstract— The Portales Valley meteorite provides an opportunity to investigate and compare the microstructure in Fe‐Ni metal of the metallic particles in the chondritic portion and in the metal veins. The low‐temperature phase decomposition of Fe‐Ni metal was investigated using scanning electron microscopy, transmission electron microscopy, and atomic force microscopy. The microstructure is formed as the Portales Valley meteorite cooled from high temperatures and includes the outer taenite rim, the cloudy zone, clear taenite, and martensite. Martensite in turn decomposes into a fine admixture of fcc rods in a bcc matrix. The width of the island phase of the cloudy zone in the metal particles of the chondritic portion and the metal veins can be used to estimate a low‐temperature cooling rate. The microstructural evidence indicates that the chondritic portions and the metal veins in the Portales Valley meteorite cooled together as a mixture with a cooling rate of roughly 6.5 K/Ma.     

The structure and composition of metal particles in two type 6 ordinary chondrites

Abstract— The purpose of this study is to examine, using light optical and electron optical techniques, the microstructure and composition of metal particles in ordinary chondritic meteorites. This examination will lead to the understanding of the low temperature thermal history of metal particles in their host chondrites. Two type 6 falls were chosen for study: Kernouvé (H6) and Saint Severin (LL6). In both meteorites, the taenite particles consisted of a narrow rim of high Ni taenite and a central region of cloudy zone similar to the phases observed in iron meteorites. The cloudy zone microstructure was coarser in Saint Severin than in Kernouvé due to the higher bulk Ni content of the taenite and the slower cooling rate, 3 K Ma^?1 vs. 17 K Ma^?1. Three microstructural zones were observed within the high Ni taenite region in both meteorites. The origin of the multiple zones is unknown but is most likely due to the high Ni taenite cooling into the two phase γ″ (FeNi) + γ′ (FeNi₃) region of the low temperature Fe-Ni phase diagram. Another explanation may be the presence of uniform size antiphase boundaries within the high Ni taenite. Finally, abnormally wide high Ni taenite regions are observed bordering troilite. The wide zones are probably caused by the diffusion of Ni from troilite into the high Ni taenite borders at low cooling temperatures.     

Thermal histories of IVA iron meteorites from transmission electron microscopy of the cloudy zone microstructure

Abstract— We have measured the size of the high‐Ni particles in the cloudy zone and the width of the outer taenite rim in eight low shocked and eight moderately to heavily shocked IVA irons using a transmission electron microscope (TEM). Thin sections for TEM analysis were produced by a focused ion beam instrument. Use of the TEM allowed us to avoid potential artifacts which may be introduced during specimen preparation for SEM analysis of high Ni particles <30 nm in size and to identify microchemical and microstructural changes due to the effects of shock induced reheating. No cloudy zone was observed in five of the eight moderately to highly shocked (>13 GPa) IVA irons that were examined in the TEM. Shock induced reheating has allowed for diffusion from 20 nm to 400 nm across kamacite/taenite boundaries, recrystallization of kamacite, and the formation, in Jamestown, of taenite grain boundaries. In the eleven IVA irons with cloudy zone microstructures, the size of the high‐Ni particles in the cloudy zone increases directly with increasing bulk Ni content. Our data and the inverse correlation between cooling rate and high‐Ni particle size for irons and stony‐irons show that IVA cooling rates at 350‐200 °C are inversely correlated with bulk Ni concentration and vary by a factor of about 15. This cooling rate variation is incompatible with cooling in a metallic core that was insulated with a silicate mantle, but is compatible with cooling in a metallic body of radius 150 ± 50 km. The widths of the tetrataenite regions next to the cloudy zone correlate directly with high‐Ni particle size providing another method to measure low temperature cooling rates.     

Electron microscopy study of the iron meteorite Santa Catharina

Abstract— Characterization of the microstructural features of the metal of the Santa Catharina meteorite was performed using a variety of electron optical techniques. Sample USNM#6293 is chemically homogeneous on the micron scale and has a Ni content of 28.2 wt.%. Its microstructure is similar to that of the Twin City ataxite and contains clear taenite II, i.e., fcc taenite with domains of tetrataenite, < 10 nm in size. Sample USNM#3043 is a more typical Santa Catharina specimen with dark and light regions as observed with the light optical microscope. The dark regions are inhomogeneous and contain 45–50 wt.% Ni and 7–12 wt.% O. The light regions are homogeneous and contain 35 wt.% Ni and no detectable oxygen. The microstructure is that of cloudy zone, i.e., islands of tetrataenite, ～20 nm in size, in a honeycomb matrix. The honeycomb phase contains Ni rich oxide in the dark regions and contains metal, fcc taenite, in the light regions. The original metal structure of USNM#3043 is cloudy zone which formed during cooling into the low temperature miscibility gap of the Fe-Ni phase diagram. The dark regions were developed from the metal by selective corrosion of the honeycomb structure, transforming it into Ni containing oxides, possibly non-stoichiometric Fe₂NiO₄ while retaining the tetrataenite islands. Using the results of this study, many of the existing discrepancies concerning the microstructure of Santa Catharina can be explained.     

Metallographic cooling rates of group IIF iron meteorites

Abstract— Metallographic cooling rates have been calculated for all five members of the iron meteorites group IIF using two different techniques. We have determined cooling rates of ～5 °C/Ma based on Ni profiles through the taenite rim enclosing kamacite spindles. Ni profiles through the kamacite phase are less precise cooling rate indicators, but suggest a cooling rate of ～1 °C/Ma within an order of magnitude at lower temperatures (360–400 °C). Based on the kamacite bandwidth and the Ni profiles through the taenite, we estimate that the kamacite nucleated 130–200 °C below the temperature predicted from the phase diagram. The size of and the distance between the large kamacite spindles is found to be consistent with the thermal history that we have determined on the basis of Ni profiles in kamacite and taenite. We find that previously published kamacite bandwidth cooling rates for the five group IIF members are most likely in error because of the presence of large schreibersite spindles in some kamacite spindles and because undercooling of kamacite was ignored. Contrary to previous workers we find that the metallographic cooling rates are consistent with cooling in a common core.     

The cooling rates of iron meteorites—A new approach

Measurements of Ni concentration profiles of a large number of neighboring kamacite and taenite lamellae in the iron meteorite Cape York (IIIA) have revealed that the kamacite plates have nucleated in a taenite of varying Ni concentration, equal to or above the bulk Ni concentration of the meteorite. This variation indicates that the kamacite plates nucleated stepwise (i.e., independently) during cooling through a certain temperature interval, rather than simultaneously after more or less undercooling of the meteorite. The latter is assumed in most previous cooling rate determinations (e.g., Moren and Goldstein, 1978). In this paper the measured local bulk Ni concentrations are used in the computer simulation of the evolution of the Widmannstaetten pattern in order to calculate the cooling rate of the meteorite. The cooling rate obtained for Cape York is 1.3°K/my. In most previous work, a correlation is seen between the resulting taenite width and the cooling rate in one and the same meteorite. No such correlation is seen using the present method.     

Ion probe measurements of carbon and nitrogen in iron meteorites

Abstract— Carbon and nitrogen distributions in iron meteorites, their concentrations in various phases, and their isotopic compositions in certain phases were measured by secondary ion mass spectrometry (SIMS). Taenite (and its decomposition products) is the main carrier of C, except for IAB iron meteorites, where graphite and/or carbide (cohenite) may be the main carrier. Taenite is also the main carrier of N in most iron meteorites unless nitrides (carlsbergite CrN or roaldite (Fe, Ni)₄N) are present. Carbon and N distributions in taenite are well correlated unless carbides and/or nitrides are exsolved. There seem to be three types of C and N distributions within taenite. (1) These elements are enriched at the center of taenite (convex type). (2) They are enriched at the edge of taenite (concave type). (3) They are enriched near but some distance away from the edge of taenite (complex type). The first case (1) is explained as equilibrium distribution of C and N in Fe-Ni alloy with M-shape Ni concentration profile. The second case (2) seems to be best explained as diffusion controlled C and N distributions. In the third case (3), the interior of taenite has been transformed to the α phase (kamacite or martensite). Carbon and N were expelled from the α phase and enriched near the inner border of the remaining γ phase. Such differences in the C and N distributions in taenite may reflect different cooling rates of iron meteorites. Nitrogen concentrations in taenite are quite high approaching 1 wt% in some iron meteorites. Nitride (carlsbergite and roaldite) is present in meteorites with high N concentrations in taenite, which suggests that the nitride was formed due to supersaturation of the metallic phases with N. The same tendency is generally observed for C (i.e., high C concentrations in taenite correlate with the presence of carbide and/or graphite). Concentrations of C and N in kamacite are generally below detection limits. Isotopic compositions of C and N in taenite can be measured with a precision of several permil. Isotopic analysis in kamacite in most iron meteorites is not possible because of the low concentrations. The C isotopic compositions seem to be somewhat fractionated among various phases, reflecting closure of C transport at low temperatures. A remarkable isotopic anomaly was observed for the Mundrabilla (IIICD anomalous) meteorite. Nitrogen isotopic compositions of taenite measured by SIMS agree very well with those of the bulk samples measured by conventional mass spectrometry.     

THE YIELD STRENGTH OF METEORITIC IRON

The compressive yield strength was determined on three meteorites using specimens 4 mm and 8 mm in length and strain magnifications of 10,000 and 2000 respectively, with an apparatus developed for testing small specimens of biological hard tissue. The flow stresses required to produce 0.2% plastic strain in a recrystallized Cañon Diablo specimen, in the Odessa octahedrite, and in the metal phase of a Brenham were 62.9 K psi, 46.6 K psi, and 62.7 K psi respectively. The flow stress of Cañon Diablo after heating in a vacuum for one hour at 871 °C and furnace cooling was 60.0 K psi. The microstructure and grain size of the heat treated specimen was virtually that of the untreated meteorite. Plastic deformation of the Odessa specimen produced wavy slip lines in kamacite on a previously polished and etched surface. Slip lines also developed in taenite and cracks occurred in the phosphide phase.     

Evolution of molten material in iron cores of small planets

A parent body of the Lovina meteorite underwent processes which yielded dentritic structures of taenite in phosphide-sulfide-metal matrix unusual for iron meteorites. Similar dendritic structures can be found also in IIE meteorites as microinclusions but are unknown in other iron meteorites. The similarity between dendritic structures in the Lovina meteorite and metal-phosphide inclusions in IIE iron meteorites implies similar processes which led to their crystallization from molten materials in chambers of various sizes. Studying physical and chemical crystallization parameters of metal-phosphide inclusions in the Elga meteorite (IIE) makes it feasible to estimate the p-T conditions required for the unique Lovina meteorite to have formed. It is shown that dendrites in the Lovina meteorite may have been crystallized from molten materials close in composition to P-FeNi and P-S-FeNi that are produced when phosphides and sulfides melt locally in metals as a result of impact events with subsequent fast cooling. The temperature of homogeneous melting is likely to have been more than 1450°C, and the starting temperature of crystallization of such molten materials is estimated to have been between 1050 and 1150°C. The cooling rate of inclusions can be estimated to be 10⁻³ °C s⁻¹, based on the structural and chemical concordance between samples obtained experimentally (Chabot et al., 2000) and metal-phosphide inclusions (P-FeNi and P-S-FeNi) in the Elga meteorite. Large-sized dendrites in the Lovina meteorite imply cooling rates that are considerably less than 10⁻³ °C s⁻¹.     

The metallographic cooling rate method revised: Application to iron meteorites and mesosiderites

Abstract— A major revision of the current Saikumar and Goldstein (1988) cooling rate computer model for kamacite growth is presented. This revision incorporates a better fit to the α/α + γ phase boundary and to the γ/α + γ phase boundary particularly below the monotectoid temperature of 400 °C. A reevaluation of the latest diffusivities for the Fe‐Ni system as a function of Ni and P content and temperature is made, particularly for kamacite diffusivity below the paramagnetic to ferromagnetic transition. The revised simulation model is applied to several iron meteorites and several mesosiderites. For the mesosiderites we obtain a cooling rate of 0.2 °C/Ma, about 10x higher than the most recent measured cooling rates. The cooling rate curves from the current model do not accurately predict the central nickel content of taenite halfwidths smaller than ～10 μm. This result calls into question the use of conventional kamacite growth models to explain the microstructure of the mesosiderites. Kamacite regions in mesosiderites may have formed by the same process as decomposed duplex plessite in iron meteorites.     

Metal phases in ordinary chondrites: Magnetic hysteresis properties and implications for thermal history

Magnetic properties are sensitive proxies to characterize FeNi metal phases in meteorites. We present a data set of magnetic hysteresis properties of 91 ordinary chondrite falls. We show that hysteresis properties are distinctive of individual meteorites while homogeneous among meteorite subsamples. Except for the most primitive chondrites, these properties can be explained by a mixture of multidomain kamacite that dominates the induced magnetism and tetrataenite (both in the cloudy zone as single‐domain grains, and as larger multidomain grains in plessite and in the rim of zoned taenite) dominates the remanent magnetism, in agreement with previous microscopic magnetic observations. The bulk metal contents derived from magnetic measurements are in agreement with those estimated previously from chemical analyses. We evidence a decreasing metal content with increasing petrologic type in ordinary chondrites, compatible with oxidation of metal during thermal metamorphism. Types 5 and 6 ordinary chondrites have higher tetrataenite content than type 4 chondrites. This is compatible with lower cooling rates in the 650–450 °C interval for higher petrographic types (consistent with an onion‐shell model), but is more likely the result of the oxidation of ordinary chondrites with increasing metamorphism. In equilibrated chondrites, shock‐related transient heating events above approximately 500 °C result in the disordering of tetrataenite and associated drastic change in magnetic properties. As a good indicator of the amount of tetrataenite, hysteresis properties are a very sensitive proxy of the thermal history of ordinary chondrites, revealing low cooling rates during thermal metamorphism and high cooling rates (e.g., following shock reheating or excavation after thermal metamorphism). Our data strengthen the view that the poor magnetic recording properties of multidomain kamacite and the secondary origin of tetrataenite make equilibrated ordinary chondrites challenging targets for paleomagnetic study.     

Ordinary chondrite metallography: Part 1. Fe‐Ni taenite cooling experiments

Abstract— Cooling rate experiments were performed on P‐free Fe‐Ni alloys that are compositionally similar to ordinary chondrite metal to study the taenite ? taenite + kamacite reaction. The role of taenite grain boundaries and the effect of adding Co and S to Fe‐Ni alloys were investigated. In P‐free alloys, kamacite nucleates at taenite/taenite grain boundaries, taenite triple junctions, and taenite grain corners. Grain boundary diffusion enables growth of kamacite grain boundary precipitates into one of the parent taenite grains. Likely, grain boundary nucleation and grain boundary diffusion are the applicable mechanisms for the development of the microstructure of much of the metal in ordinary chondrites. No intragranular (matrix) kamacite precipitates are observed in P‐free Fe‐Ni alloys. The absence of intragranular kamacite indicates that P‐free, monocrystalline taenite particles will transform to martensite upon cooling. This transformation process could explain the metallography of zoneless plessite particles observed in H and L chondrites. In P‐bearing Fe‐Ni alloys and iron meteorites, kamacite precipitates can nucleate both on taenite grain boundaries and intragranularly as Widmanstätten kamacite plates. Therefore, P‐free chondritic metal and P‐bearing iron meteorite/pallasite metal are controlled by different chemical systems and different types of taenite transformation processes.     

Remnants of altered meteorite in the Cretaceous‐Paleogene clay boundary in Poland

Fossil iron meteorites are extremely rare in the geological sedimentary record. The paleometeorite described here is the first such finding at the Cretaceous‐Paleogene (K‐Pg) boundary. In the boundary clay from the outcrop at the Lechówka quarry (Poland), fragments of the paleometeorite were found in the bottom part of the host layer. The fragments of meteorite (2–6 mm in size) and meteoritic dust are metallic‐gray in color and have a total weight of 1.8181 g. Geochemical and petrographic analyses of the meteorite from Lechówka reveal the presence of Ni‐rich minerals with a total Ni amount of 2–3 wt%. The identified minerals are taenite, kamacite, schreibersite, Ni‐rich magnetite, and Ni‐rich goethite. No relicts of silicates or chromites were found. The investigated paleometeorite apparently represents an independent fall and does not seem to be derived from the K‐Pg impactor. The high degree of weathering did not permit the chemical classification of the meteorite fragments. However, the recognized mineral inventory, lack of silicates, and their pseudomorphs and texture may indicate that the meteorite remains were an iron meteorite.     

Microstructures of metal grains in ordinary chondrites: Implications for their thermal histories

Abstract— This paper reports one of the first attempts to investigate by analytical transmission electron microscopy (ATEM) the microstructures and compositions of Fe‐Ni metal grains in ordinary chondrites. Three ordinary chondrites, Saint Séverin (LL6), Agen (H5), and Tsarev (L6) were selected because they display contrasting microstructures, which reflects different thermal histories. In Saint Séverin, the microstructure of the Ni‐rich metal grains is due to slow cooling. It consists of a two‐phase assemblage with a honeycomb structure resulting from spinodal decomposition similar to the cloudy zone of iron meteorites. Microanalyses show that the Ni‐rich phase is tetrataenite (Ni = 47 wt%) and the Ni‐poor phase, with a composition of ～25% Ni, is either martensite or taenite, these two occurring adjacent to each other. The observation that the Ni‐poor phase is partly fcc resolves the disagreement between previous transmission electron microscopy (TEM) and Mössbauer studies on iron meteorites and ordinary chondrite metal. The Ni content of the honeycomb phase is much higher than in mesosiderites, confirming that mesosiderites cooled much more slowly. The high‐Ni tetrataenite rim in contact with the cloudy zone displays high‐Ni compositional variability on a very fine scale, which suggests that the corresponding area was destabilized and partially decomposed at low temperature. Both Agen and Tsarev display evidence of reheating and subsequent fast cooling obviously related to shock events. Their metallic particles mostly consist of martensite, the microstructure of which depends on local Ni content. Microstructures are controlled by both the temperature at which martensite forms and that at which it possibly decomposes. In high‐Ni zones (>15 wt%), martensitic transformation started at low temperature (<300 °C). Because no further recovery occurred, these zones contain a high density of lattice defects. In low‐Ni zones (<15 wt%), martensite grains formed at higher temperature and their lattice defects recovered. These martensite grains present a lath texture with numerous tiny precipitates of Ni‐rich taenite (Ni = 50 wt%) at lath boundaries. Nickel composition profiles across precipitate‐matrix interfaces show that the growth of these precipitates was controlled by preferential diffusion of Ni along lattice defects. The cooling rates deduced from Ni concentration profiles and precipitate sizes are within the range 1–10 °C/year for Tsarev and 10–100 °C/year for Agen.     

POTENTIOSTATIC STUDY OF IRON METEORITE CORROSION

A potentiostat was used to study the electrolytic corrosion of iron meteorites in a neutral solution. Low current densities were chosen so that the observed potentials would more closely approximate the theoretical Nernst values. Iron, nickel, and cobalt ions, the products of corrosion, were soluble in the electrolyte solution, and were determined after each electrolysis by atomic absorption spectrophotometry. Kamacite and taenite dissolved as individual phases, with kamacite dissolving preferentially. Cobalt dissolved along with iron and nickel from each phase. There is a direct relationship between nickel content and the potential at which a meteorite first starts to dissolve; the higher the nickel content, the more resistant the meteorite is to corrosion. None of the six meteorites observed started to dissolve at a lower potential than pure iron, nor at a higher potential than pure nickel     

ELECTROLYTIC CORROSION OF IRON METEORITES

Six iron meteorites were electrolyzed and the resulting corrosion was studied by a potentiostatic technique. It was found that both iron and nickel in the kamacite phase dissolve, and that neither iron nor nickel dissolve from taenite. The rate of corrosion was shown to be inversely proportional to the nickel content. However, structure, as well as nickel content, plays an important part in the electrolytic process. The Coya Norte, Chile meteorite dissolved more rapidly and more easily (at a lower potential) than did pure iron even though the Coya Norte meteorite contains 5.5% nickel.     

Trace Element Partitioning between Taenite and Kamacite; Relationship to the Cooling Rates of Iron Meteorites

Abstract— Instrumental neutron activation analysis (INAA) was used to determine Ni, Co, Cu, Ga, As, Au, W, Re and Ir in taenite lamellae isolated by acid dissolution from eight iron meteorites from groups IA, IIIAB and IVA. Taenite is enriched in Ni, Cu, Ga, As, Au, W, Re and Ir relative to kamacite, whereas taenite is depleted in Co. Taenite/kamacite partition ratios in slowly cooled IAB meteorites are farther from unity than those in rapidly cooled IVA meteorites. Taenite/kamacite partition ratios for Cu, Ir, Au and Co may be sensitive cooling rate indicators.     

Atom‐probe tomography and transmission electron microscopy of the kamacite–taenite interface in the fast‐cooled Bristol IVA iron meteorite

We report the first combined atom‐probe tomography (APT) and transmission electron microscopy (TEM) study of a kamacite–tetrataenite (K–T) interface region within an iron meteorite, Bristol (IVA). Ten APT nanotips were prepared from the K–T interface with focused ion beam scanning electron microscopy (FIB‐SEM) and then studied using TEM followed by APT. Near the K‐T interface, we found 3.8 ± 0.5 wt% Ni in kamacite and 53.4 ± 0.5 wt% Ni in tetrataenite. High‐Ni precipitate regions of the cloudy zone (CZ) have 50.4 ± 0.8 wt% Ni. A region near the CZ and martensite interface has <10 nm sized Ni‐rich precipitates with 38.4 ± 0.7 wt% Ni present within a low‐Ni matrix having 25.5 ± 0.6 wt% Ni. We found that Cu is predominantly concentrated in tetrataenite, whereas Co, P, and Cr are concentrated in kamacite. Phosphorus is preferentially concentrated along the K‐T interface. This study is the first precise measurement of the phase composition at high spatial resolution and in 3‐D of the K‐T interface region in a IVA iron meteorite and furthers our knowledge of the phase composition changes in a fast‐cooled iron meteorite below 400 °C. We demonstrate that APT in conjunction with TEM is a useful approach to study the major, minor, and trace elemental composition of nanoscale features within fast‐cooled iron meteorites.     

Thermal and impact histories of reheated group IVA,IVB, and ungrouped iron meteorites and their parent asteroids

Abstract– The microstructures of six reheated iron meteorites—two IVA irons, Maria Elena (1935), Fuzzy Creek; one IVB iron, Ternera; and three ungrouped irons, Hammond, Babb’s Mill (Blake’s Iron), and Babb’s Mill (Troost’s Iron)—were characterized using scanning and transmission electron microscopy, electron‐probe microanalysis, and electron backscatter diffraction techniques to determine their thermal and shock history and that of their parent asteroids. Maria Elena and Hammond were heated below approximately 700–750 °C, so that kamacite was recrystallized and taenite was exsolved in kamacite and was spheroidized in plessite. Both meteorites retained a record of the original Widmanstätten pattern. The other four, which show no trace of their original microstructure, were heated above 600–700 °C and recrystallized to form 10–20 μm wide homogeneous taenite grains. On cooling, kamacite formed on taenite grain boundaries with their close‐packed planes aligned. Formation of homogeneous 20 μm wide taenite grains with diverse orientations would have required as long as approximately 800 yr at 600 °C or approximately 1 h at 1300 °C. All six irons contain approximately 5–10 μm wide taenite grains with internal microprecipitates of kamacite and nanometer‐scale M‐shaped Ni profiles that reach approximately 40% Ni indicating cooling over 100–10,000 yr. Un‐decomposed high‐Ni martensite (α₂) in taenite—the first occurrence in irons—appears to be a characteristic of strongly reheated irons. From our studies and published work, we identified four progressive stages of shock and reheating in IVA irons using these criteria: cloudy taenite, M‐shaped Ni profiles in taenite, Neumann twin lamellae, martensite, shock‐hatched kamacite, recrystallization, microprecipitates of taenite, and shock‐melted troilite. Maria Elena and Fuzzy Creek represent stages 3 and 4, respectively. Although not all reheated irons contain evidence for shock, it was probably the main cause of reheating. Cooling over years rather than hours precludes shock during the impacts that exposed the irons to cosmic rays. If the reheated irons that we studied are representative, the IVA irons may have been shocked soon after they cooled below 200 °C at 4.5 Gyr in an impact that created a rubblepile asteroid with fragments from diverse depths. The primary cooling rates of the IVA irons and the proposed early history are remarkably consistent with the Pb‐Pb ages of troilite inclusions in two IVA irons including the oldest known differentiated meteorite ( Blichert‐Toft et al. 2010 ).     

Unmelted cosmic metal particles in the Indian Ocean

Fe‐Ni metal is a common constituent of most meteorites and is an indicator of the thermal history of the respective meteorites, it is a diagnostic tool to distinguish between groups/subgroups of meteorites. In spite of over a million micrometeorites collected from various domains, reports of pure metallic particles among micrometeorites have been extremely rare. We report here the finding of a variety of cosmic metal particles such as kamacite, plessite, taenite, and Fe‐Ni beads from deep‐sea sediments of the Indian Ocean, a majority of which have entered the Earth unaffected by frictional heating during atmospheric entry. Such particles are known as components of meteorites but have never been found as individual entities. Their compositions suggest precursors from a variety of meteorite groups, thus providing an insight into the metal fluxes on the Earth. Some particles have undergone heating and oxidation to different levels during entry developing features similar to I‐type cosmic spherules, suggesting atmospheric processing of individual kamacites/taenite grains as another hitherto unknown source for the I‐type spherules. The particles have undergone postdepositional aqueous alteration transforming finally into the serpentine mineral cronstedtite. Aqueous alteration products of kamacite reflect the local microenvironment, therefore they have the potential to provide information on the composition of water in the solar nebula, on the parent bodies or on surfaces of planetary bodies. Our observations suggest it would take sustained burial in water for tens of thousands of years under cold conditions for kamacites to alter to cronstedtite.