University environmental education: The role of international programmes

In universities throughout Europe, environmental education is characterized by expansion and change. The increased emphasis on the environment is requiring universities to consider the most appropriate means of meeting the wide-ranging needs of students, employers and society. International programmes do have a key role in enhancing the quality of teaching, learning and research in universities. This is especially so in the case of the environment, where problems are multinational or global, and they can only be solved by determined international collaboration. This paper considers some of the benefits (and difficulties) for universities arising from involvement in international programmes, with reference to specific examples in European environmental education and training.     

Lateral variation in upper mantle viscosity: role of water

Differences in the viscosity of the earth's upper mantle beneath the western US (∼10¹⁸-10¹⁹ Pa s) and global average values based on glacial isostatic adjustment and other data (∼10²⁰-10²¹ Pa s) are generally ascribed to differences in temperature. We compile geochemical data on the water contents of western US lavas and mantle xenoliths, compare these data to water solubility in olivine, and calculate the corresponding effective viscosity of olivine, the major constituent of the upper mantle, using a power law creep rheological model. These data and calculations suggest that the low viscosities of the western US upper mantle reflect the combined effect of high water concentration and elevated temperature. The high water content of the western US upper mantle may reflect the long history of Farallon plate subduction, including flat slab subduction, which effectively advected water as far inland as the Colorado Plateau, hydrating and weakening the upper mantle.     

Horizontal stresses in the mantle and in the moving continent for the model of two-dimensional convection with varying viscosity

Numerical experiments on studying the spatial fields and evolution of viscous overlithostatic horizontal stresses and pressure in the mantle and in the moving continent are carried out. The continent moves consistently with time-dependent forces, which act from the viscous mantle. By introducing the varying viscosity, we gain the possibility for taking into account the oceanic lithosphere and the difference between the viscosity of the upper and the lower mantle in the context of a purely viscous model. The typical overlithostatic horizontal stresses in the main part of the mantle are ±(7–9) MPa (70–90 bar); in the highly viscous regions and, particularly, in the subduction zones they are at least three times larger. The descending mantle flows in the depth interval from approximately 50 km to about 300 km are more sharply pronounced in the pressure field than in the field of horizontal stresses. At the considered stages of motion and in different parts, the continent is characterized by the following typical values of stresses: the overlithostatic pressure ranges from ?5 to +15 MPa; the horizontal overlithostatic tensile stress amounts up to ?4MPa (?40 bar); and the compressive stress in case of the overriding of the subduction zone attains +35 MPa (350 bar).     

Computer simulation of flow through a lattice flow-cell model

For single-phase flow through a network model of a porous medium, we report (1) solutions of the Navier–Stokes equation for the flow, (2) micro-particle imaging velocimetry (PIV) measurements of local flow velocity vectors in the “pores throats” and “pore bodies,” and (3) comparisons of the computed and measured velocity vectors. A “two-dimensional” network of cylindrical pores and parallelepiped connecting throats was constructed and used for the measurements. All pore bodies had the same dimensions, but three-different (square cross-section) pore-throat sizes were randomly distributed throughout the network. An unstructured computational grid for flow through an identical network was developed and used to compute the local pressure gradients and flow vectors for several different (macroscopic) flow rates. Numerical solution results were compared with the experimental data, and good agreement was found. Cross-over from Darcy flow to inertial flow was observed in the computational results, and the permeability and inertia coefficients of the network were estimated. The development of inertial flow was seen as a “two-step” process: (1) recirculation zones appeared in more and more pore bodies as the flow rate was increased, and (2) the strengths of individual recirculation zones increased with flow rate. Because each pore-throat and pore-body dimension is known, in this approach an experimental (and/or computed) local Reynolds number is known for every location in the porous medium at which the velocity has been measured (and/or computed).     

Nonlinear free thermal convection in a spherical shell:A variable viscosity model

Introduction The velocity field of surface plate motion can be split into a poloidal and a toroidal parts.At the Earth′s surface,the toroidal component is manifested by the existence of transform faults,and the poloidal component by the presence of convergence and divergence,i.e.spreading and subduc-tion zones.They have coupled each other and completely depicted the characteristics of plate tec-tonic motions.The mechanism of poloidal field has been studied fairly clearly which is related to …     

A lattice Boltzmann model coupled with a Large Eddy Simulation model for flows around a groyne

This present paper proposes a two-dimensional lattice Boltzmann model coupled with a Large Eddy Simulation (LES) model and applies it to flows around a non-submerged groyne in a channel. The LES of shallow water equations is efficiently performed using the Lattice Boltzmann Method (LBM) and the turbulence can be taken into account in conjunction with the Smagorinsky Sub-Grid Stress (SGS) model. The bounce-back scheme of the non-equilibrium part of the distribution function is used to determine the unknown distribution functions at inflow boundary, the zero gradient of the distribution function is set normal to outflow boundary to obtain the unknown distribution functions here and the bounce-back scheme, which states that an incoming particle towards the boundary is bounced back into fluid, is applied to the solid wall to ensure non-slip boundary conditions. The initial flow field is defined firstly and then is used to calculate the local equilibrium distributions as initial conditions of the distribution functions. These coupled models successfully predict the flow characteristics, such as circulating flow, velocity and water depth distributions. The comparisons between the simulated results and the experimental data show that the model scheme has the capacity to solve the complex flows in shallow water with reasonable accuracy and reliability.     

The changing role of ecohydrological science in guiding environmental flows

Abstract

The term “environmental flows” is now widely used to reflect the hydrological regime required to sustain freshwater and estuarine ecosystems, and the human livelihoods and well-being that depend on them. The definition suggests a central role for ecohydrological science to help determine a required flow regime for a target ecosystem condition. Indeed, many countries have established laws and policies to implement environmental flows with the expectation that science can deliver the answers. This article provides an overview of recent developments and applications of environmental flows on six continents to explore the changing role of ecohydrological sciences, recognizing its limitations and the emerging needs of society, water resource managers and policy makers. Science has responded with new methods to link hydrology to ecosystem status, but these have also raised fundamental questions that go beyond ecohydrology, such as who decides on the target condition of the ecosystem? Some environmental flow methods are based on the natural flow paradigm, which assumes the desired regime is the natural “unmodified” condition. However, this may be unrealistic where flow regimes have been altered for many centuries and are likely to change with future climate change. Ecosystems are dynamic, so the adoption of environmental flows needs to have a similar dynamic basis. Furthermore, methodological developments have been made in two directions: first, broad-scale hydrological analysis of flow regimes (assuming ecological relevance of hydrograph components) and, second, analysis of ecological impacts of more than one stressor (e.g. flow, morphology, water quality). All methods retain a degree of uncertainty, which translates into risks, and raises questions regarding trust between scientists and the public. Communication between scientists, social scientists, practitioners, policy makers and the public is thus becoming as important as the quality of the science.

Editor Z.W. Kundzewicz

Citation Acreman, M.C., Overton, I.C., King, J., Wood, P., Cowx, I.G., Dunbar, M.J., Kendy, E., and Young, W., 2014. The changing role of ecohydrological science in guiding environmental flows. Hydrological Sciences Journal, 59 (3–4), 433–450     

A probabilistic model for sediment entrainment:The role of bed irregularity

A generalized probabilistic model is developed in this study to predict sediment entrainment under the incipient motion, rolling, and pickup modes. A novelty of the proposed model is that it incorporates in its formulation the probability density function of the bed shear stress, instead of the near-bed velocity fluctuations, to account for the effects of both flow turbulence and bed surface irregularity on sediment entrainment. The proposed model incorporates in its formulation the collective effects of three para-meters describing bed surface irregularity, namely the relative roughness, the volumetric fraction and relative position of sediment particles within the active layer. Another key feature of the model is that it provides a criterion for estimating the lift and drag coefficients jointly based on the recognition that lift and drag forces acting on sediment particles are interdependent and vary with particle protrusion and packing density. The model was validated using laboratory data of both fine and coarse sediment and was compared with previously published models. The study results show that all the examined models perform adequately for the fine sediment data, where the sediment particles have more uniform gra-dation and relative roughness is not a factor. The proposed model was particularly suited for the coarse sediment data, where the increased bed irregularity was captured by the new parameters introduced in the model formulation. As a result, the proposed model yielded smaller prediction errors and physically acceptable values for the lift coefficient compared to the other models in case of the coarse sediment data.     

The science and practice of environmental flows and the role of hydrogeologists

Conflicts between ecosystems and human needs for fresh water are increasing. The purpose of this paper is to raise awareness in the hydrogeologic community of environmental flows (EFs) and to address the major challenges involved in their protection. Ground water is a key component of EFs, and therefore hydrogeologists are called upon to get involved in the ongoing debates about maintaining healthy riverine ecosystems. Promising opportunities for achieving EFs in both underallocated and overallocated basins as well as new methods for protecting fresh water ecosystems developed in different countries are outlined. EF protection measures include private water trusts, "upside-down instream flow water rights," the "public trust" doctrine, and water markets, among other measures. A number of knowledge gaps are identified, to which hydrogeologists could contribute, such as our rudimentary knowledge about ground water-dependent ecosystems, aspects of stream-aquifer interactions, and the impacts of land-use changes. The values that society places on the different uses of water ultimately determine where the water is allocated. EF requirements can be legitimately recognized and addressed by basing the environmental needs of hydrologic systems on robust science, focusing on increasing the productivity of water use, engaging society in understanding the benefits and costs of decisions that affect ecosystems, and taking advantage of various opportunities for achieving EF goals.     

Full-scale model testing on a ballastless high-speed railway under simulated train moving loads

Model testing in laboratory, as an effective alternative to field measurement, provides valuable data to understand railway׳s dynamic behaviors under train moving loads. This paper presents comprehensive experimental results on track vibration and soil response of a ballastless high-speed railway from a full-scale model testing with simulated train moving loads at various speeds. A portion of a realistic ballastless railway comprising slab track, roadbed, subgrade, and subsoil was constructed in a larger steel box. A computer-controlled sequential loading system was developed to generate equivalent vertical loadings at the track structure for simulating the dynamic excitations due to train׳s movements. Comparisons with the field measurements show that the proposed model testing can accurately reproduce dynamic behaviors of the track structure and underlying soils under train moving loads. The attenuation characteristics of dynamic soil stresses in a ballastless slab track is found to have distinct differences from that in a ballasted track. The model testing results provide better understanding of the influence of dynamic soil–structure interaction and train speed on the response of track structure and soils.     

The role of playas in pedogenic gypsum crust formation in the Central Namib Desert: a theoretical model

The formation of Namibia's extensive pedogenic gypsum crusts (CaSO₄·2H₂O) is interpreted in a new light. It is suggested that gypsum primarily precipitates at isolated points of evaporitic concentration, such as inland playas, and that deflation of evaporitic‐rich gypsum dust from these playas contributes to the formation of pedogenic gypsum duricrusts on the coastal gravel plains of the Namib Desert surrounding these playas. This study establishes the nature, extent and distribution of playas in the Central Namib Desert and provides evidence for playa gypsum deflation and gravel plain deposition. Remote sensing shows the distribution of playas, captures ongoing deflation and provides evidence of gypsum deflation. It is proposed that, following primary marine aerosol deposition, both inland playas and coastal sabkhas generate gypsum which through the process of playa deflation and gravel plain redeposition contributes to the extensive pedogenic crusts found in the Namib Desert region. Copyright © 2001 John Wiley & Sons, Ltd.     

The nonlinear effects of the eddy viscosity and the bottom friction on the Lagrangian residual velocity in a narrow model bay

The nonlinear effects of the eddy viscosity and the bottom friction on the Lagrangian residual velocity (LRV) are studied numerically in a narrow model bay. Three groups of the experiments with different eddy viscosity and different forms of the bottom friction are designed and are carried out in the three kinds of the topography. When the eddy viscosity is obtained from a two-equation turbulence closure model, the pattern of the LRV is more complex than that of the time invariant eddy viscosity case and the intensity is from more than 1.3 times to one order smaller than that of the linear eddy viscosity condition. The LRV are also acquired when the eddy viscosity varies from the flood-averaged one to the ebb-averaged one. It is found that when the flood-averaged eddy viscosity is bigger than the ebb-averaged eddy viscosity (flood-dominated asymmetry), the direction of the breadth-averaged LRV and the 3D LRV is nearly opposite to that when the eddy viscosity asymmetry is reverse (ebb-dominated asymmetry). However, the intensity of the LRV for the ebb-dominated case decreases toward the flood-dominated case as the ratio of the maximum depth in the deep channel and the minimum depth on the shoal increases. The different forms of the bottom friction also play a role in the LRV. The structures of the 3D LRV and the depth-integrated LRV are simpler, and the intensity of the LRV is two times smaller when the linear bottom friction is used than those when the quadratic bottom friction is used.     

On the role of diffractions in velocity model building: a full-waveform inversion example

Studia Geophysica et Geodaetica - Imaging of small-scale heterogeneities is important for the geological exploration in complex environments. It requires a processing sequence tuned to...     

The environmental impact of marine fish culture: Towards a sustainable future

The environmental impact of marine fish-farming depends very much on species, culture method, stocking density, feed type, hydrography of the site and husbandry practices. In general, some 85% of phosphorus, 80–88% of carbon and 52–95% of nitrogen input into a marine fish culture system as feed may be lost into the environment through feed wastage, fish excretion, faeces production and respiration. Cleaning of fouled cages may also add an organic loading to the water, albeit periodically. Problems caused by high organic and nutrient loadings conflict with other uses of the coastal zone. The use of chemicals (therapeutants, vitamins and antifoulants) and the introduction of pathogens and new genetic strains have also raised environmental concerns.

Despite the high pollution loadings, results from various studies show that some 23% of C, 21% of N and 53% of P of feed input into the culture system is being accumulated in the bottom sediments and the significant impact is normally confined to within 1 km of the farm. The major impact is on the sea bottom, where high sediment oxygen demand, anoxic sediments, production of toxic gases and a decrease in benthic diversity may result. Decreases in dissolved oxygen and increases in nutrient levels in the water are also evident but are normally confined to the vicinity of the farm. Tributyltin (TBT) contamination and the development of antibiotic-resistant bacteria have been reported near fish farms. The stimulating effects of vitamins/fish wastes on growth of red tide species have been demonstrated in a number of laboratory studies. Nevertheless, there is no evidence to support the suggestion that the present use of therapeutants, vitamins and antibiotics and the introduction of pathogens and new genetic strains would pose a significant threat to the environment.

Marine fish culture can be a sustainable development, provided pollution loadings generated by fish farms are kept well below the carrying capacity of the water body. Effects can be significantly reduced by careful site selection, control of stock density, improved feed formulation and integrated culture (with macroalgae, filter-feeders and deposit-feeders). An example of the application of computer modelling in mariculture management is demonstrated. Environmental impact assessment and monitoring should also be carried out to ensure culture activities are environmentally sustainable.     

Dynamic stability of a lattice dome

A shallow lattice dome subjected to three independent sets of step or impulse loads is investigated. Symmetric and asymmetric loading distributions are considered. The dynamic response is determined by numerical integration, and critical loads are defined by the Budiansky-Roth criterion. Interaction curves for fixed maximum response and for snap-through instability are obtained, and a comparison is made with previous results for static loading.