Sea transport of animal and vegetable oils and its environmental consequences

The increasing production––and therefore sea traffic––of vegetable oils has regularly led to spillages during the past 40 years. The accident of Allegra, on October,1st, 1997, in the English Channel gave rise to a spillage of 900 tonnes of palm nut oil. The drift of this solid vegetable oil was followed by aerial observations. Samples of oil were collected in order to analyse its chemical evolution. This study, associated with several bibliographic cases of pollution by non-petroleum oils, shows that drifting oils can mix with floating material to sink or form a crust. They can also be oxidized or disperse and/or be degraded by bacteria. They may also polymerise. The coating properties of vegetable oils act as crude oils to affect sea life, tourism and yachting. As a result, it is necessary to quickly collect the oil after a spillage, using usual equipment (booms and pumps).     

A biological oil adsorption filter

A new oil adsorption method called adsorption filtration (AF) has been developed. It is a technology where by oil residues can be cleaned from water by running it through a simple filter made from freeze treated, dried, milled and then fragmented plant material. By choosing suitable plants and fragmentation sizes it is possible to produce filters, which pass water but adsorb oil. The aim of this study was to investigate the possibilities of manufacturing oil adsorbing filter materials from reed canary grass (Phalaris arundinacea), flax (Linum usitatissimum L.) or hemp fibre (Cannabis sativa L.). The oil (80 ml) was mixed with de-ionised water (200 ml) and this mixture was filtered through 10 or 20 g adsorption filters. Fine spring harvested hemp fibre (diameter less than 1 mm) and reed canary grass fragments adsorb 2-4 g of oil per gram of adsorption material compared to 1-3 g of water. Adsorption filtration is thus a novel way of gathering spilled oil in shallow coastal waters before the oil reaches the shore.     

Batch and Continuous Design of a Full‐Scale Treatment Facility for Removing Dissolved Natural Organic Matter

Batch and continuous flow adsorption experiments are carried out and the design of a full‐scale facility for removing dissolved natural organic matter (DNOM) from Catalan Lakewater is demonstrated. The adsorption efficiency is proportional to the temperature and the amount of adsorbent unlike pH increase. The highest DNOM removal rate is obtained at 35 °C, pH 4, and an adsorbent amount of 0.8 g L^?1. Optimum contact time for batch studies is 60 min at equilibrium. Correlation constants (r) of Langmuir and Freundlich isotherms are 0.8905 and 0.9739, respectively. Based on the Freundlich isotherm, the highest adsorption capacity (q_max) obtained is 2.44 and 6.01 mg DNOM/g granulated activated carbon (GAC) for raw and enriched water, respectively. Consequently, the effects of adsorbent amount, bed depth, empty bed contact time, and organic loading on removal performance are investigated in the rapid small‐scale column test (RSSCT) columns. The targeted effluent concentration of 1 mg DNOM/L can easily be achieved in the columns. At the design capacity of the facility, 15 adsorption columns with dimensions of 7 m height, 4.33 m diameter, and 22 days of operation cycle are required to remove DNOM from raw water.     

Adsorption of cobalt by using inorganic components of sediment samples from water bodies

The adsorption of cobalt ions was evaluated using sediment samples from water bodies to investigate the adsorption properties of sediment and the behavior of these natural materials in the presence of nuclear and industrial waste.The two sediments(S1 and S2)were treated to eliminate humic and fulvic acids and then they were characterized by several techniques.The minerals found in both the sediments(X-ray diffraction)were quartz and albite;plus,goethite and muscovite in S1,and kaolinite and montmorillonite in S2.Point of zero charge(PZC)of S1 and S2 was 6.00 and 5.22,respectively.The specific area of S1(63.3 m²/g)is higher than S2(1.5 m²/g).Adsorption kinetics data for S1 and S2 were best fitted to the pseudo second-order model.The removal efficiency of S1 for cobalt was 96%with an adsorption capacity(qe)of 0.93 mg/g,and for S2 was 45%with a qeof 0.40 mg/g.The experimental data of the adsorption isotherms were adjusted to Langmuir and Freundlich models for S1 and S2,respectively.The thermodynamic parameters(enthalpy,entropy,and Gibb’s free energy)indicated that the adsorption processes were endothermic,spontaneous,and chemisorption mechanism.The results show that the adsorption capacities of the sediments depend on their composition.These water sediments have important adsorption properties for cobalt,and they can be used in the treatment of nuclear and industrial aqueous wastes.     

Nanoporous polystyrene fibers for oil spill cleanup

The development of oil sorbents with high sorption capacity, low cost, scalable fabrication, and high selectivity is of great significance for water environmental protection, especially for oil spillage on seawater. In this work, we report nanoporous polystyrene (PS) fibers prepared via a one-step electrospinning process used as oil sorbents for oil spill cleanup. The oleophilic-hydrophobic PS oil sorbent with highly porous structures shows a motor oil sorption capacity of 113.87 g/g, approximately 3-4 times that of natural sorbents and nonwoven polypropylene fibrous mats. Additionally, the sorbents also exhibit a relatively high sorption capacity for edible oils, such as bean oil (111.80 g/g) and sunflower seed oil (96.89 g/g). The oil sorption mechanism of the PS sorbent and the sorption kinetics were investigated. Our nanoporous material has great potential for use in wastewater treatment, oil accident remediation and environmental protection.     

Ground Water Contamination in Kuwait Resulting from the 1991 Gulf War: A Preliminary Assessment

A large number of oil wells in Kuwait were damaged and ignited by the retreating Iraqi troops during the 1991 Gulf War. The resulting spillage of huge volumes of crude oil on the surface gave rise to oil lakes and crude oil–impregnated soil. Moreover, products of crude oil combustion had spread over a large tract of the ground surface, causing widespread contamination of soil. Hydrocarbon contamination of ground water by the infiltrating runoff water carrying the contaminants from the surface soil to the water table and/or through direct contact with the crude oil leaking through the damaged casing in the subsurface was feared. This preliminary study was carried out to investigate the extent and nature of this possible contamination of ground water. The results indicate that the shallow fresh water lenses present under the Umm Al-Aish water field and in the southeastern parts of the Raudhatain water field in North Kuwait were affected by hydrocarbon pollution. Standard methods like the determination of the contents of the total petroleum hydrocarbon by the Fourier transform infrared method and 16 polyaromatic hydrocarbons using the gas chromatography-mass spectrometry method did not work well, possibly due to the environmental degradation of the crude oil over time. The fluorescence methods and the total organic carbon and total organic matter gave better indications of the intensity and the extent of ground water pollution. The brackish water fields of South and Central Kuwait were, however, free of any indications of hydrocarbon contamination.     

Effect of particle density and inflow concentration of suspended sediment on bedload transport in rill flow

Laboratory flume experiments were carried out to evaluate the effect of particle density on bedload transport of sand‐sized particles and the effect of a suspended load of clay particles (kaolinite) on bedload transport of sand‐sized particles in rill flow conditions. Three materials in the range 400–600 µm were selected to simulate bedload transport of primary particles and aggregates: sand (2650 kg/m³), crushed brick (2450 kg/m³) and anthracite (1300–1700 kg/m³). In the two first experiments, two different methods were applied to determine bedload transport capacity of coarse particles for various conditions of flow discharge (from 2 to 15 L/min) and slope (2.2, 3 and 4%). In the third experiment, clear water was replaced with kaolinite–water mixture and bedload transport capacity of crushed brick particles was determined for a 4% slope and different concentrations of kaolinite (0, 7, 41 and 84 g/L). The results showed that bedload transport increased significantly with the decrease in particle density but the effect of particle density on transport rates was much less important than flow discharge. Velocity measurements of clear flow, flow mixed with coarse particles and coarse particles confirmed the existence of a differentiation between suspended load and bedload. In these experimental conditions, suspended load of kaolinite did not affect bedload rates of crushed brick particles. Three transport capacity formulae were tested against observed bedload rates. A calibration of the Foster formula revealed that the shear stress exponent should be greater than 1.5. The Low and the Govers unit stream power (USP) equations were then evaluated. The Low equation was preferred for the prediction of bedload rates of primary particles but it was not recommended in the case of aggregates of low density because of the limited experimental conditions applied to derive this equation. Copyright © 2008 John Wiley & Sons, Ltd.     

Protein Digestibility by Khosti Fish Colisa fasciatus (Pisces,Anabantidae) under the Influence of Certain Factors

Protein digestibility was determined via two feeding trials in glass aquaria by the indicator (Chromium oxide) method using a mixture of shrimp powder with oil cake and wheat bran respectively (1: 1 W/W) as food. Analyses of feed were made to calculate the crude protein, carbohydrate, lipid and ash contents. Feces were analysed to determine their total nitrogen and chromium oxide. Protein digestibility was studied in relation to salinity of the medium size and weight of the fish body. The apparent digestibility of crude protein of a corresponding die has shown that 1st: Younger fish do possess a lower capability of protein digestion than fish having a medium weight and medium size; 2nd: Older fish with a high weight and large size exhibit no improvement in efficiency to digest the food protein, though their weight and size are significantly greater than those of middle weight and medium size fish; 3rd: The replacement of oil cake by wheat bran decreases the protein digestibility of shrimp powder mixture with them; 4th: A salinity (NaCl) of the aquatic medium at or above 3 g/l depletes the protein digestibility when fish of the same size were experimented with; but a salinity up to 2 g/l does not result in a significant decrease in the protein digestion rate.     

Superhydrophobic and superoleophillic surface of porous beaded electrospun polystrene and polysytrene-zeolite fiber for crude oil-water separation

This research presents a cheap route procedure for the preparation of a potential adsorbent with superhydrophobic/superoleophillic properties for selective removal of crude oil from water. In this study, expanded polystyrene (EPS) was electrospun to produce beaded fibers in which zeolite was introduced to the polymer matrix in order to impart rough surface to non-beaded fiber. Films of the EPS and EPS/Zeolite solutions were also made for comparative study. The electrospun fibers EPS, EPS/Zeolite and resultant films were characterized using SEM, BET, FTIR and optical contact angle. The fibers exhibited superhydrophobic and superoleophillic wetting properties with water (>150⁰) and crude oil (0⁰). The selective removal of crude oil presents new opportunity for the re-use of EPS as adsorbent in petroleum/petrochemical industry.     

How important is the selection of computational analysis method to the accuracy of rainwater tank behaviour modelling?

As the concept of sustainable urban water management is incorporated into the practice of urban water resource managers, actions, such as the utilization of roof runoff via rainwater tanks, which have multiple benefits, are increasingly being built into urban water systems. Modelling tools are frequently used to predict the yield from rainwater tanks and to estimate the storage capacity required to achieve a given potable supply reduction level, with these estimates used in both urban water resources policy development and engineering design. Therefore, it is important that the accuracy of commonly used models is understood. This paper investigates the impact of computational time step, computational operating rule, initial storage level, and the length of simulation period on the accuracy of the storage–yield–reliability relationship calculated using a simple rainwater tank behaviour model. Four time steps (ranging from 6 min to 24 h), two operational rules (supply before spillage and supply after spillage), two initial storage level states (empty and full), and three simulation periods (50 years, 10 years and 1 year) were applied to a wide range of rainwater tank system configurations and three different locations in Australia. It was found that the supply‐after‐spillage computational operating rule is preferable, while the ratio of the average demand volume in a single computational time step divided by the storage capacity (ΔD/S) can be used to assess whether a given combination of demand, storage, inflow, and computational time step will provide long‐term yield estimates that are within ± 5% of the values produced by a simulation that used a 50‐year time series of climate, 6‐min time step, and a supply‐after‐spillage operational rule (50‐6‐YAS). Copyright © 2007 John Wiley & Sons, Ltd.     

Polycyclic aromatic hydrocarbon (PAHs) and hopanes in stranded tar-balls on the coasts of Peninsular Malaysia: applications of biomarkers for identifying sources of oil pollution

Malaysian coasts are subjected to various threats of petroleum pollution including routine and accidental oil spill from tankers, spillage of crude oils from inland and offshore oil fields, and run-off from land-based human activities. Due to its strategic location, the Straits of Malacca serves as a major shipping lane. This paper expands the utility of biomarker compounds, hopanes, in identifying the source of tar-balls stranded on Malaysian coasts. 20 tar-ball samples collected from the east and west coast were analyzed for hopanes and polycyclic aromatic hydrocarbons (PAHs). Four of the 13 tar-ball samples collected from the west coast of Peninsular Malaysia were identified as the Middle East crude oil (MECO) based on their biomarker signatures, suggesting tanker-derived sources significantly contributing the petroleum pollution in the Straits of Malacca. The tar-balls found on the east coast seem to originate from the offshore oil platforms in the South China Sea. The presence of South East Asian crude oil (SEACO) tar-balls on the west coast carry several plausible explanations. Some of the tar-balls could have been transported via sea currents from the east coast. The tankers carrying SEACO to other countries could have accidentally spilt the oil as well. Furthermore, discharge of tank washings and ballast water from the tankers were suggested based on the abundance in higher molecular weight n-alkanes and the absence of unresolved complex mixture (UCM) in the tar-ball samples. The other possibilities are that the tar-balls may have been originated from the Sumatran oil fields and spillage of domestic oil from oil refineries in Port Dickson and Malacca. The results of PAHs analysis suggest that all the tar-ball samples have undergone various extent of weathering through evaporation, dissolution and photo-oxidation.     

Natural sediment at a dam and its inorganic materials as adsorbents of praseodymium(Pr(Ⅲ))

The sediment deposited behind a dam(DS) and its inorganic materials(IM-DS) were characterized and used for the removal of praseodymium(Pr) from aqueous solutions. Quartz, albite, and kaolinite were found in the sediment by X-ray diffraction. Kinetic data fit well to a pseudo second-order model, the equilibrium time for DS and IM-DS was 2 h and 3 min, respectively, and the adsorption capacity was higher for Pr/DS(q_e= 4.91 mg/g) than for Pr/IM-DS(q_e= 3.01 mg/g) in these condi...     

Removal of heavy metals from contaminated water using ethylenediamine-modified green seaweed (Caulerpa serrulata)

The demand for clean water is on the increase as the population increases. One of the ways to address the water shortage is to treat the polluted water through removal of the contaminants. The use of adsorbents for pollutant removal is one of the promising methods. Seaweed is an aquatic plant and its sorption ability for selected metals in water was investigated in this study. We report the performance of the seaweed (Caulerpa serrulata) before and after modification with ethylenediamine (EDA), on adsorption of copper, lead and cadmium in aqueous solution. The adsorption capacities for Cu, Cd and Pb were 5.27 mg g⁻¹, 2.12 mg g⁻¹ and 2.16 mg g⁻¹, respectively, with the EDA-modified seaweed, and 3.29 mg g⁻¹, 4.57 mg g⁻¹ and 1.06 mg g⁻¹, with the unmodified weed, respectively. The pH for maximum adsorption was found to be within the range of pH 4–pH 6. In a separate investigation, it was found that 0.1 g of dried seaweed leached 20 mg of dissolved organic carbon (DOC) using 100 ml of distilled-deionised water. The resulting solution was green. The leaching phenomenon contributes to secondary pollution. Modification of the seaweed with EDA reduced the DOC content by half (50%) and also removed the green colouration. Kinetic studies showed that the adsorbent was able to take up to 95% of the metals (in synthetic standard solutions) in less than 10 min. The adsorbed metals were then stripped using a solution of 0.5 M HNO₃ indicating that the adsorbent can be regenerated. In addition, the study revealed that modification improved the thermal stability of the adsorbent such that even when the temperature was raised to 1000 °C, more than 80% (compared to <50% for unmodified weed) of the modified adsorbent was not degraded, indicating that modification had a significant influence on the thermal stability of seaweed. The modified seaweed has been shown to have great potential for the removal of metals and DOC in polluted water. The modified adsorbent can therefore be applied for the removal of metals in polluted waters hence suitable for treatment of water for domestic consumption at a point of use.     

The Dona Marika oil spill

Last August, 3,000 tons of petrol (gasolene) was spilled in Milford Haven when the tanker, Dona Marika, ran aground. Since most documented oil spills in British waters have been of crude oil, there is considerable interest in knowing the damage caused by this spillage of a refined oil product.     

Can recently-hatched crayfish cling to moving ducks and be transported during flight?

The red swamp crayfish (Procambarus clarkii) is a freshwater invasive species which has become a worldwide problem. Recent work on ectozoochory of freshwater macrocrustacean species indicated that there might be a possibility of transport of recently-hatched crayfish by birds. In this context, we applied a new set of methods to quantify the probability of transport of recently-hatched crayfish, namely with moving animal vectors. First, we tested the desiccation resistance of crayfish and the capacity of crayfish to cling to mallard's feet, depending on the standing time of the feet. We also determined the ability of recently-hatched crayfish to cling to an artificially moving freshly dead mallard (Anas platyrhynchos) and finally, we determined the time required for the death of 50% and 90% of the individuals of recently-hatched crayfish under conditions similar to those of mallard flight.Recently-hatched crayfish were able to survive up to 225 min out of water, withstanding longer at a lower temperature and therefore transport does not seem to be limited by desiccation survival. The duration of the standing period of duck's feet positively affected the probability of transport of crayfish. Recently-hatched crayfish were able to cling to a moving duck and the probability of clinging was significantly affected by the water depth, being lower at greater depths. Moreover, when transported on a freshly dead duck under flight simulation conditions the time required for the death of 50% and 90% of the individuals were 2 min 14 s and 4 min 53 s, respectively. These flight durations correspond to transport distances of 2.8 km and 6.1 km, respectively, which is enough for transport to another aquatic system. The results demonstrate that passive transport of recently hatched P. clarkii by actively moving waterbirds is possible, and therefore it will likely enhance the local process of invasion.     

Hydrodynamic Effects in the Adsorption of Organic Pollutants from Water

An effective filter for water purification from oil products and hydrocarbons under different dynamic conditions is suggested. The structural parameters of the filter have been optimized in accordance with the hydrodynamic and adsorption properties of the filtering system. Dependence of the filter adsorption capacity on its structural parameters, physicochemical properties of the sorbent, and the chemical nature of the hydrocarbon is examined.     

Rapid Cleanup of a Perchlorate Plume from Fireworks

Perchlorate was detected in a municipal wellfield in Evart, Michigan in April 2015. Perchlorate concentrations were detected initially in six of the City's wells at concentrations ranging up to 20 μg/L. An investigation to identify the source determined that the perchlorate was from fireworks launched during the annual 4th of July show held at the fairgrounds located upgradient from the wellfield. The use of approximately 600 kg of fireworks during the annual display resulted in an annual loading of approximately 4 kg of perchlorate to groundwater. An aggressive groundwater extraction system began operation in June 2016 to restore water quality in the affected aquifer, and the 2016 fireworks display was relocated to a location outside the capture zone of the water supply wells. Within 18 months average perchlorate concentrations in the water supply wells had been reduced to about 0.6 μg/L. The extraction system continued to operate through the end of 2019, by which time the average perchlorate concentrations in the water supply wells were reduced to 0.2 μg/L. In 2019, approximately 0.4 kg of perchlorate were removed from the aquifer, about one-half of the amount removed in 2018, reflecting the slow leaching of perchlorate of fireworks residuals from vadose zone soils.     

Chemical evolution of Macondo crude oil during laboratory degradation as characterized by fluorescence EEMs and hydrocarbon composition

The fluorescence EEM technique, PARAFAC modeling, and hydrocarbon composition were used to characterize oil components and to examine the chemical evolution and degradation pathways of Macondo crude oil under controlled laboratory conditions. Three major fluorescent oil components were identified, with Ex/Em maxima at 226/328, 262/315, and 244/366 nm, respectively. An average degradation half-life of ～20 d was determined for the oil components based on fluorescence EEM and hydrocarbon composition measurements, showing a dynamic chemical evolution and transformation of the oil during degradation. Dispersants appeared to change the chemical characteristics of oil, to shift the fluorescence EEM spectra, and to enhance the degradation of low-molecular-weight hydrocarbons. Photochemical degradation played a dominant role in the transformation of oil components, likely an effective degradation pathway of oil in the water column. Results from laboratory experiments should facilitate the interpretation of field-data and provide insights for understanding the fate and transport of oil components in the Gulf of Mexico.     

The partitioning of Triclosan between aqueous and particulate bound phases in the Hudson River Estuary

The distribution of Triclosan within the Hudson River Estuary can be explained by a balance among the overall effluent inputs from municipal sewage treatment facilities, dilution of Triclosan concentrations in the water column with freshwater and seawater inputs, removal of Triclosan from the water column by adsorption to particles, and loss to photodegradation. This study shows that an average water column concentration of 3 ± 2 ng/l (in the lower Hudson River Estuary) is consistent with an estimate for dilution of average wastewater concentrations with seawater and calculated rates of adsorption of Triclosan to particles. An average Triclosan sediment concentration of 26 ± 11 ng/g would be in equilibrium with the overlying water column if Triclosan has a particle-to-water partitioning coefficient of k_d  10⁴, consistent with laboratory estimates.     

Removal of Fluoride from Aqueous Solutions by Adsorption Using a Siliceous Mineral of a Kenyan Origin

The problem of high fluoride in water sources in Africa and the rest of the developing world has exacerbated in the latest past due to increasing shortage of water. More people are being exposed to high water fluoride resulting in elevated levels of fluorosis in the societies. Fluoride (F) adsorption from solutions using a siliceous mineral from Kenya (M1) was studied on batch basis and results verified on high fluoride water using fixed‐bed column experiments. About 100% batch F adsorption was achieved at 200 mg/L F concentration, 0.5 g/mL adsorbent dosage, 303–333 K, and pH 3.4 ± 0.2. Based on Giles classifications, F adsorption isotherm was found to be an H3 type isotherm. The equilibrium data was correlated to Freundlich and Langmuir models and the maximum Langmuir adsorption capacity was found to be 12.4 mg/g. Column experiments were conducted for different fluoride concentrations, bed depths, and flow rates. The F breakthrough curves were analyzed using the Thomas model and efficient F adsorption was found to occur at low flow rates and low influent concentrations. The Thomas F adsorption capacity (11.7 mg/g) was consistent with the Langmuir isotherm capacity showing that M1 could be applied as an inexpensive medium for water defluoridation.