<Emphasis Type="Italic">Lg</Emphasis> Body-Wave Magnitude Scaling for the Continental Margin around Korea and Japan

Regional body-wave magnitude scalings are essential for quantification of small and moderate-size earthquakes that are observed only up to regional distances. Crustally-guided shear waves, Lg, develop stably at regional distances in continental crusts and are minimally influenced by the source radiation patterns. Lg body-wave magnitude scalings, m_b(Lg),m_b(Lg), are widely used for assessment of sizes of regional crustal events. The m_b(Lg)m_b(Lg) scaling has rarely been tested in continental margins where Lg waves are significantly attenuated due to abrupt lateral variation of crustal structures. We test the applicability of m_b(Lg)m_b(Lg) scaling to the eastern margin of the Eurasian plate around the Korean Peninsula and Japanese islands. Both third-peak and root-mean-square (rms) amplitudes of Lg vary significantly according to the crustal structures along raypaths, causing apparent underestimation of m_b(Lg).m_b(Lg). Implementation of raypath-dependent quality factors (Q) allows accurate estimation of m_b(Lg),m_b(Lg), retaining the transportability of m_b(Lg)m_b(Lg) in the continental margin around Korea and Japan. The calibration constants for an rms-amplitude-based m_b(Lg)m_b(Lg) scaling are not determined to vary by region in the continental margin due to complicated crustal structures. The calibration constants are determined to be distance-dependent. Both the third-peak-amplitude-based and rms-amplitude-based m_b(Lg)m_b(Lg) scalings yield accurate magnitude estimates when raypath-dependent quality factors are implemented.     

Attenuation of High Frequency P and S Waves in the Gujarat Region,India

The local earthquake waveforms recorded on broadband seismograph network of Institute of Seismological Research in Gujarat, India have been analyzed to understand the attenuation of high frequency (2–25 Hz) P and S waves in the region. The frequency dependent relationships for quality factors for P (Q _P) and S (Q _S) waves have been obtained using the spectral ratio method for three regions namely, Kachchh, Saurashtra and Mainland Gujarat. The earthquakes recorded at nine stations of Kachchh, five stations of Saurashtra and one station in mainland Gujarat have been used for this analysis. The estimated relations for average Q _P and Q _S are: Q _P = (105 ± 2) f ^{0.82 ± 0.01}, Q _S = (74 ± 2) f ^{1.06 ± 0.01} for Kachchh region; Q _P = (148 ± 2) f ^{0.92 ± 0.01}, Q _S = (149 ± 14) f ^{1.43 ± 0.05} for Saurashtra region and Q _P = (163 ± 7) f ^{0.77 ± 0.03}, Q _S = (118 ± 34) f ^{0.65 ± 0.14} for mainland Gujarat region. The low Q (<200) and high exponent of f (>0.5) as obtained from present analysis indicate the predominant seismic activities in the region. The lowest Q values obtained for the Kachchh region implies that the area is relatively more attenuative and heterogeneous than other two regions. A comparison between Q _S estimated in this study and coda Q (Qc) previously reported by others for Kachchh region shows that Q _C > Q _S for the frequency range of interest showing the enrichment of coda waves and the importance of scattering attenuation to the attenuation of S waves in the Kachchh region infested with faults and fractures. The Q _S/Q _P ratio is found to be less than 1 for Kachchh and Mainland Gujarat regions and close to unity for Saurashtra region. This reflects the difference in the geological composition of rocks in the regions. The frequency dependent relations developed in this study could be used for the estimation of earthquake source parameters as well as for simulating the strong earthquake ground motions in the region.     

Lower crustal attenuation in northeastern Tibetan Plateau from ML amplitude

This study investigated the crustal attenuation structures of Sg and Lg waves of the northeastern Tibetan Plateau. We collected M_L amplitude data recorded at 168 permanent stations between 1985 and 2016 and 11 temporary broadband stations between 2014 and 2016. Detailed Q₀ variation maps of Sg and Lg waves were obtained by applying M_L amplitude tomography. The average Q₀ values of the Sg and Lg wave were 440 and 220, respectively. Relatively high attenuation anomalies of both waves appeared in the central and eastern regions of the Bayan Har Block and the east edge of the Qiangtang Block, which may be related to partial melting, high geotemperature, and strong tectonic processes. High attenuation anomalies were also found in the Qilian Orogenic Belt and Hetao Graben, which may be related to their active tectonic behavior and densely distributed faults. The relatively low attenuation anomalies of both waves were revealed in the Alax and Ordos blocks, Qaidam, Tarim, Qinghai Lake, and Gonghe basins, which can be explained by the tectonically stable properties and ancient composition of geological elements. These results indicate that the path between the highly attenuated lower crust of the Bayan Har Block and the Qilian Orogenic Belt is obstructed by three adjacent low attenuated areas (i.e., the Qilian, Qinghai Lake, and Gonghe basins); thus, it appears unlikely that a crustal flow channel from the interior of the Tibetan Plateau to the Qilian Orogenic Belt will form.     

Estimating seismic moments and Lg Q using Lg spectra

A multi-event and multi-station inverse method is presented in the paper to simultaneously estimate the seismic moments (M ₀) and source corner frequencies (f _c) of several Jiashi (Xinjiang, China) earthquakes, as well as the apparent Lg Q models for the paths from Jiashi to eight seismic stations (WMQ, AAK, TLG, MAKZ, KUR, VOS, ZRN and CHK) in Central Asia. The resultant seismic moments correlate well with the M ₀ values obtained by Harvard University using the centroid moment tensor (CMT) inversion and the surface-wave magnitudes as well. After the correction by a typical value of average radiation coefficient for regional SV waves, the M ₀ values from Lg spectral inversion are still close to the corresponding values obtained from CMT inversion. The obtained apparent Q _0Lg values (Lg Q at 1 Hz) are consistent with the tectonic features of corresponding propagation paths. The Q _0Lg values are 351±87, 349±86 and 300±27 for the paths from Jiashi to AAK, TLG and MAKZ, respectively. They are smaller than Q _0Lg values for the paths to KUR, VOS, ZRN and CHK, which are 553±72, 569±58, 550±57 and 603±65, respectively. These results agree with the condition that the paths to AAK, TLG and MAKZ mainly propagate through the mountainous Tianshan area where relatively strong seismic activities and large variations of topography are exhibited, while the paths to KUR, VOS, ZRN and CHK mainly propagate through the stable area of Kazak platform. The Q _0Lg value for the path to WMQ is 462±56. This is also in agreement with the condition that the path to WMQ is basically along the border area between Tianshan Mountain and Tarim Basin, and along this path the variations of topography and crustal thickness are moderate in comparison with that along the path to MAKZ. Foundation item: Foundation of Verification Researches for Army Control Technology (413290102).     

Mapping Crustal Heterogeneity Using Lg Propagation Efficiency Throughout the Middle East, Mediterranean, Southern Europe and Northern Africa

—?In this paper we describe a technique for mapping the lateral variation of Lg characteristics such as Lg blockage, efficient Lg propagation, and regions of very high attenuation in the Middle East, North Africa, Europe and the Mediterranean regions. Lg is used in a variety of seismological applications from magnitude estimation to identification of nuclear explosions for monitoring compliance with the Comprehensive Nuclear-Test-Ban Treaty (CTBT). These applications can give significantly biased results if the Lg phase is reduced or blocked by discontinuous structure or thin crust. Mapping these structures using quantitative techniques for determining Lg amplitude attenuation can break down when the phase is below background noise. In such cases Lg blockage and inefficient propagation zones are often mapped out by hand. With our approach, we attempt to visually simplify this information by imaging crustal structure anomalies that significantly diminish the amplitude of Lg. The visualization of such anomalies is achieved by defining a grid of cells that covers the entire region of interest. We trace Lg rays for each event/station pair, which is simply the great circle path, and attribute to each cell a value equal to the maximum value of the Lg/P-coda amplitude ratio for all paths traversing that particular cell. The resulting map, from this empirical approach, is easily interpreted in terms of crustal structure and can successfully image small blockage features often missed by analysis of raypaths alone. This map can then be used to screen out events with blocked Lg prior to performing Q tomography, and to avoid using Lg-based methods of event identification for the CTBT in regions where they cannot work.¶For this study we applied our technique to one of the most tectonically complex regions on the earth. Nearly 9000 earthquake/station raypaths, traversing the vast region comprised of the Middle East, Mediterranean, Southern Europe and Northern Africa, have been analyzed. We measured the amplitude of Lg relative to the P-coda and mapped the lateral variation of Lg propagation efficiency. With the relatively dense coverage provided by the numerous crossing paths we are able to map out the pattern of crustal heterogeneity that gives rise to the observed character of Lg propagation. We observe that the propagation characteristics of Lg within the region of interest are very complicated but are readily correlated with the different tectonic environments within the region. For example, clear strong Lg arrivals are observed for paths crossing the stable continental interiors of Northern Africa and the Arabian Shield. In contrast, weakened to absent Lg is observed for paths crossing much of the Middle East, and Lg is absent for paths traversing the Mediterranean. Regions that block Lg transmission within the Middle East are very localized and include the Caspian Sea, the Iranian Plateau and the Red Sea. Resolution is variable throughout the region and strongly depends on the distribution of seismicity and recording stations. Lg propagation is best resolved within the Middle East where regions of crustal heterogeneity on the order of 100?km are imaged (e.g., South Caspian Sea and Red Sea). Crustal heterogeneity is resolvable but is poorest in seismically quiescent Northern Africa.     

Lg Wave Attenuation in the Isparta Angle and Anatolian Plateau (Turkey)

We estimate Lg wave attenuation using local and regional seismic phases in the Isparta Angle and the Anatolian Plateau (Turkey). The Isparta Angle (IA) is a tectonically active zone forming the boundary between the African Plate and the Anatolian Plateau, and is currently undergoing N–S extensional deformation. The Anatolian Plateau contains many intra-continental faults including the North Anatolian Fault Zone and the East Anatolian Fault Zone as well as the Menderes Massif. A large waveform data set was compiled from a variety of local and regional seismic networks including 121 digital seismic stations (broad-band and short period) between 1999 and 2008 spanning the IA, the Anatolian Plateau and Azerbaijan. The data set was used to determine the nature of Lg wave propagation and characterize the nature of seismic attenuation within the crust of these regions. Lg waveforms were used to calculate the frequency-dependent Lg-Q _o and Lg- $ \eta $ . A wide range of Lg-Q _o values was obtained between ~52 ± 6 and 524 ± 227. Low Lg-Q _o values (~90–155) are calculated towards the north of IA, Iskenderun Gulf and its vicinity, Bingöl-Karl?ova, Izmit and its vicinity. Lg-Q _o values are especially low (<90) along the Menderes Massif and the Aksehir-Simav Fault Zones. This may be due to intrinsic attenuation of Lg associated with the partially molten crust and young volcanism. The high Lg-Q _o values (~350) are probably caused by the crust not being subject to large amounts of extensional deformation like the Antalya Gulf and apparently being thick enough to support Lg propagation. Relatively higher values along the border of this subduction zone and plate boundary might be related to the Taurus Mountain belts and Bitlis-Zagros Suture Zone. The lateral frequency dependency Lg- $ \eta $ is also consistent with high tectonic activity in this region.     

Estimating seismic moments and Lg <Emphasis Type="Italic">Q</Emphasis> using Lg spectra

A multi-event and multi-station inverse method is presented in the paper to simultaneously estimate the seismic moments (M ₀) and source corner frequencies (f _c) of several Jiashi (Xinjiang, China) earthquakes, as well as the apparent Lg Q models for the paths from Jiashi to eight seismic stations (WMQ, AAK, TLG, MAKZ, KUR, VOS, ZRN and CHK) in Central Asia. The resultant seismic moments correlate well with the M ₀ values obtained by Harvard University using the centroid moment tensor (CMT) inversion and the surface-wave magnitudes as well. After the correction by a typical value of average radiation coefficient for regional SV waves, the M ₀ values from Lg spectral inversion are still close to the corresponding values obtained from CMT inversion. The obtained apparent Q _0Lg values (Lg Q at 1 Hz) are consistent with the tectonic features of corresponding propagation paths. The Q _0Lg values are 351±87, 349±86 and 300±27 for the paths from Jiashi to AAK, TLG and MAKZ, respectively. They are smaller than Q _0Lg values for the paths to KUR, VOS, ZRN and CHK, which are 553±72, 569±58, 550±57 and 603±65, respectively. These results agree with the condition that the paths to AAK, TLG and MAKZ mainly propagate through the mountainous Tianshan area where relatively strong seismic activities and large variations of topography are exhibited, while the paths to KUR, VOS, ZRN and CHK mainly propagate through the stable area of Kazak platform. The Q _0Lg value for the path to WMQ is 462±56. This is also in agreement with the condition that the path to WMQ is basically along the border area between Tianshan Mountain and Tarim Basin, and along this path the variations of topography and crustal thickness are moderate in comparison with that along the path to MAKZ.     

The revisedm Lg scale in six eastern provinces of China

The influence of the four different methods of measuring Lg amplitude, and the selection of different geometrical attenuation coefficient ζ-values (=5/6 or 1) on the determination ofγ value of Lg wave are discussed.γ=0.0034±0.0001km^?1 (when ζ=5/6) for six eastern provinces is redetermined. The revised magnitude calibration function ofm _Lg (mxh),q _E (Δ)=(5/6)logΔ+0.00147Δ+1.81 is deduced.     

Regional Variation of Lg Coda Q in the Continental United States and its Relation to Crustal Structure and Evolution

—Records from broadband digital stations have allowed us to map regional variations of Lg coda Q across almost the entire United States. Using a stacked ratio method we obtained estimates of Q ₀ (Lg coda Q at 1 Hz) and its frequency dependence, <eta>, for 218 event-station pairs. Those sets of estimates were inverted using a back-projection method to obtain tomographic images showing regional variations of Q ₀ and <eta>. Q ₀ is lowest (250–300) in the California coastal regions and the western part of the Basin and Range province, and highest (650–750) in the northern Appalachians and a portion of the Central Lowlands. Intermediate values occur in the Colorado Plateau (300–500), the Columbia Plateau (300–400), the Rocky Mountains (450–550), the Great Plains (500–650), the Gulf Coastal Plain and the southern portion of Atlantic Coastal Plain (400–500), and the portions of the Central Lowlands surrounding the high-Q region (500–550). The pattern of Q ₀ variations suggests that the United States can be divided into two large Q provinces. One province spans the area from the Rocky Mountains to the Atlantic coast, is tectonically stable, and exhibits relatively high Q ₀?. The other extends westward from the approximate western margin of the Rocky Mountains to the Pacific coast, is tectonically active, and exhibits low Q ₀?. The transition from high to low Lg coda Q in the western United States lies further to the west than does an upper mantle transition for Q and electrical resistivity found in earlier studies. The difference in Q ₀ between the western and eastern United States can be attributed to a greater amount of interstitial crustal fluids in the west. Regions of moderately reduced Q within the stable platform often occur where there are accumulations of Mesozoic and younger sediments. Reduced Q ₀ in the southeastern United States may not be due to anelasticity but may rather be explained by a gradational velocity increase at the crust-mantle boundary that causes shear energy to leak into the mantle.     

Moment tensors,state of stress and their relation to faulting processes in Gujarat,western India

Time domain moment tensor analysis of 145 earthquakes (M_w 3.2 to 5.1), occurring during the period 2006–2014 in Gujarat region, has been performed. The events are mainly confined in the Kachchh area demarcated by the Island belt and Kachchh Mainland faults to its north and south, and two transverse faults to its east and west. Libraries of Green's functions were established using the 1D velocity model of Kachchh, Saurashtra and Mainland Gujarat. Green's functions and broadband displacement waveforms filtered at low frequency (0.5–0.8 Hz) were inverted to determine the moment tensor solutions. The estimated solutions were rigorously tested through number of iterations at different source depths for finding reliable source locations. The identified heterogeneous nature of the stress fields in the Kachchh area allowed us to divide this into four Zones 1–4. The stress inversion results indicate that the Zone 1 is dominated with radial compression, Zone 2 with strike-slip compression, and Zones 3 and 4 with strike-slip extensions. The analysis further shows that the epicentral region of 2001 M_W 7.7 Bhuj mainshock, located at the junction of Zones 2, 3 and 4, was associated with predominant compressional stress and strike-slip motion along ∼ NNE-SSW striking fault on the western margin of the Wagad uplift. Other tectonically active parts of Gujarat (e.g. Jamnagar, Talala and Mainland) show earthquake activities are dominantly associated with strike-slip extension/compression faulting. Stress inversion analysis shows that the maximum compressive stress axes (σ₁) are vertical for both the Jamnagar and Talala regions and horizontal for the Mainland Gujarat. These stress regimes are distinctly different from those of the Kachchh region.     

The revised m Lg scale in six eastern provinces of China

The influence of the four different methods of measuring Lg amplitude, and the selection of different geometrical attenuation coefficient ζ-values (=5/6 or 1) on the determination ofγ value of Lg wave are discussed.γ=0.0034±0.0001km⁻¹ (when ζ=5/6) for six eastern provinces is redetermined. The revised magnitude calibration function ofm _Lg (mxh),q _E (Δ)=(5/6)logΔ+0.00147Δ+1.81 is deduced. The Chinese version of this paper appeared in the Chinese edition ofActa Seismologica Sinica,13, 171–178, 1991. Projects sponsored by the Chinese Joint Seismological Science Foundation.     

Attenuation,source parameters and site effects in the Irpinia–Basilicata region (southern Apennines,Italy)

We derive S-wave attenuation characteristics, earthquake source parameters and site amplification functions at seismic stations used for earthquake early warning in the Irpinia–Basilicata region, using non-parametric spectral inversion of seismograms from 49 local events with M _L = 1.5–3.1. We obtain relatively low Q values (Q ₀ = 28 at a frequency of 1 Hz) in conjunction with a strong frequency-dependence (close to linear). The source spectra can be satisfactorily modeled using the omega-square model, with stress drops ranging between 0.01–2 MPa, and in the narrow magnitude range available for analysis, the source spectra seem to scale self-similarly. The local magnitude M _L shows a linear correlation with moment magnitude M _W, however with a systematic underestimation by about 0.5-magnitude units. The results obtained in this work provide important insights into the ground-motion characteristics that are required for appropriate seismic hazard assessment and are of practical relevance for a suite of applications, such as the calibration of ground-motion prediction equations or the correction for site amplification in earthquake early warning and rapid calculation of shake-maps for seismic emergency management.     

An inversion of site response and Lg attenuation using Lg waveform

Based on spectral ratio method, a joint inversion method was used to obtain parameters of Lg wave attenuation and site response. The inversion method allows simple and direct (two-parameter) determination of Lg wave attenua- tion and site response from sparse spectral data, which are not affected by radiation pattern factor and different response of same instrument after geometrical spreading. The method was used successfully for estimating site re- sponse of stations of Zhejiang Seismic Network and measuring Lg wave attenuation. The study is based on 20 earth- quakes occurred in northeast of Taiwan with magnitude MS5.0~6.7 and 960 seismic wave records from 16 stations in Zhejiang area from 2002 to 2005. The parameters of site response and Lg attenuation were calculated with a fre- quency interval of 0.2 Hz in the range of 0.5 Hz to 10 Hz. Lg wave attenuation coefficient corresponding to U-D, E-W and N-S components are γ ( f )=0.00175 f 0.43485, γ ( f )=0.00145f 0.48467 and γ ( f )=0.0021f 0.41241, respectively. It is found that the site response is component-independent. It is also found that the site response of QIY station is significant above the frequency of 1.5 Hz, and that the site response of NIB station is low for most frequency     

Body-wave Attenuation in the Region of Garda, Italy

We analyzed the spectral amplitude decay with hypocentral distance of P and S waves generated by 76 small magnitude earthquakes (M_L 0.9–3.8) located in the Garda region, Central-Eastern Alps, Italy. These events were recorded by 18 stations with velocity sensors, in a distance range between 8 and 120 km. We calculated nonparametric attenuation functions (NAF) and estimated the quality factor Q of both body waves at 17 different frequencies between 2 and 25 Hz. Assuming a homogeneous model we found that the Q frequency dependence of P and S can be approximated with the functions Q _P = 65 f ^0.9 and Q _S = 160 f ^0.6 , respectively. At 2 Hz the Q _S /Q _P ratio reaches the highest value of 2.8. At higher frequencies Q _S /Q _P varies between 0.7 and 1.7, suggesting that for this frequency band scattering may be an important attenuation mechanism in the region of Garda. To explore the variation of Q in depth, we estimated Q at short (r ≤ 30 km) and intermediate (35–90 km) distance paths. We found that in the shallow crust P waves attenuate more than S (1.3 < Q _S /Q _P < 2.5). Moreover, P waves traveling along paths in the lower crust (depths approximately greater than 30 km) attenuate more than S waves. To quantify the observed variability of Q in depth we considered a three-layer model and inverted the NAF to estimate Q in each layer. We found that in the crust Q increases with depth. However, in the upper mantle (~40–50 km depth) Q decreases and in particular the high frequency Q _S (f > 9 Hz) has values similar to those estimated for the shallow layer of the crust.     

利用ML振幅研究地壳横波Q值Ⅱ:Q横向变化特征

利用中国地震年报(1984～2004年)测定M_L所用的54000余条区域地震最大振幅数据,采用二维层析成像方法反演中国大陆地壳介质品质因子Q₀结构.反演结果表明,中国大陆地壳介质品质因子Q₀平均为370,Q₀横向变化量可达±200.在整个研究区解的分辨率能够达到3°×3°,大部分地区能够达到2°×2°.Q₀的变化显示出与地质构造分区相关的特征：低衰减 (高Q₀值) 异常区主要分布在塔里木盆地、四川盆地、鄂尔多斯高原及华南地区,鄂尔多斯高原北部Q₀值最高;高衰减异常区(低Q₀值)主要分布在青藏高原以东的川滇地区、华北平原、渤海湾,最低Q₀值在渤海湾地区,天山、祁连山和汾渭地堑Q₀也呈较低异常变化.总体看来,构造上稳定的克拉通地台的介质品质因子Q₀较高,而构造上活动的地区往往Q₀较低,显现出区域的衰减变化特征与地壳结构和区域构造之间的密切关系.     

Ground-motion Attenuation Relation from Strong-motion Records of the 2001 Mw 7.7 Bhuj Earthquake Sequence (2001–2006), Gujarat, India

Predictive relations are developed for peak ground acceleration (PGA) from the engineering seismoscope (SRR) records of the 2001 M_w 7.7 Bhuj earthquake and 239 strong-motion records of 32 significant aftershocks of 3.1 ≤ M_w ≤ 5.6 at epicentral distances of 1 ≤ R ≤ 288 km. We have taken advantage of the recent increase in strong-motion data at close distances to derive new attenuation relation for peak horizontal acceleration in the Kachchh seismic zone, Gujarat. This new analysis uses the Joyner-Boore’s method for a magnitude-independent shape, based on geometrical spreading and anelastic attenuation, for the attenuation curve. The resulting attenuation equation is,

Attenuation of high-frequency earthquake waves in South America

Earlier attenuation studies for the South American continent indicate that for Sn and Lg waves there is low attenuation in the shield region east of the Andes, whereas in the west of South America, with some exceptions, there is high attenuation. Those studies, however, were nonquantitative. In this study theQ ₀ (1-Hz values) for Lg waves for South America are presented, based on a scattering model ofAki (1969) as extended byHerrmann (1980) for the coda waves of shallow local and near-regional earthquakes. The results of the codaQ method are compared with those obtained byNuttli's method (1973). TheseQ ₀ values are in good agreement with the apparentQ ₀ of Lg waves obtained by the latter method. The data were obtained from over 100 local and regional earthquakes recorded by 12 WWSSN stations throughout continental South America. They provided a range of frequencies from 0.4 to 1.4 Hz, for which the frequency dependence ofQ was investigated by assumingQ=Q ₀(f/f ₀). The observed data indicate that the tectonic region of western South America is characterized by lowQ ₀ and a large frequency-dependent factor , the values ranging from 150 to 350 and 0.4 to 0.7, respectively. TheQ ₀ values increase in the shield region east of the Andes, but frequency dependence decreases. The average crustalQ ₀ for north and central Argentina ranges from 420 to 580, and ranges from 0.2 to 0.3. TheQ ₀ is larger in the Brazil region, ranging from 580 to 980, and varies from 0.0 to 0.2. In the lower-attenuation region of eastern South America higher values of attenuation correlate with greater thickness of the sedimentary layers.     

Empirical model for estimating Fourier amplitude spectra of ground acceleration in Taiwan region

A collection of ground‐motion recordings (1070 acceleration records) of moderate (5.1⩽M_L⩽6.5) earthquakes obtained during the execution of the Taiwan Strong Motion Instrumentation Program (TSMIP) since 1991 was used to study source scaling model and attenuation relations for a wide range of earthquake magnitudes and distances and to verify the models developed recently for the Taiwan region. The results of the analysis reveal that the acceleration spectra of the most significant part of the records, starting from S‐wave arrival, can be modelled accurately using the Brune's ω‐squared source model with magnitude‐dependent stress parameter Δσ, that should be determined using the recently proposed regional relationships between magnitude (M_L) and seismic moment (M₀) and between M₀ and Δσ. The anelastic attenuation Q of spectral amplitudes with distance may be described as Q=225 ƒ^1.1 both for deep (depth more than 35 km) and shallow earthquakes. The source scaling and attenuation models allow a satisfactory prediction of the peak ground acceleration for magnitudes 5.1⩽M⩽6.5 and distances up to about 200 km in the Taiwan region, and may be useful for seismic hazard assessment. Copyright © 2000 John Wiley & Sons, Ltd.     

Estimation of Coda Wave Attenuation for the National Capital Region, Delhi, India Using Local Earthquakes

Attenuation of seismic waves is very essential for the study of earthquake source parameters and also for ground-motion simulations, and this is important for the seismic hazard estimation of a region. The digital data acquired by 16 short-period seismic stations of the Delhi Telemetric Network for 55 earthquakes of magnitude 1.5 to 4.2, which occurred within an epicentral distance of 100 km in an area around Delhi, have been used to estimate the coda attenuation Q_c. Using the Single Backscattering Model, the seismograms have been analyzed at 10 central frequencies. The frequency dependence average attenuation relationship Q_c = 142f ^1.04 has been attained. Four Lapse-Time windows from 20 to 50 seconds duration with a difference of 10 seconds have been analyzed to study the lapse time dependence of Q_c. The Q_c values show that frequency dependence (exponent n) remains similar at all the lapse time window lengths. While the change in Q₀ values is significant, change in Q₀ with larger lapsetime reflects the rate of homogeneity at the depth. The variation of Q_c indicates a definitive trend from west to east in accordance with the geology of the region.     

Propagation and attenuation characteristics of the crustal phaseLg

TheLg wave consists of the superposition ofS waves supercritically reflected, and thus trapped, in the crust. This mode of propagation explains the strong amplitude of this phase and the large distance range in which it is observed. The numerical simulation leads to successful comparison between observed seismograms in stable continental areas and synthetics computed for simple standard crustal models. In regions with strong lateral variations, the influence of large-scale heterogeneities on theLg amplitude is not yet clearly established in terms of the geometrical characteristics of the crustal structure.The analysis of the decay of amplitude ofLg with epicentral distance allows the evaluation of the quality factor ofS waves in the crust. The results obtained show the same trends as codaQ: a clear correlation with the tectonic activity of the region considered, both for the value ofQ at 1 Hz and for its frequency dependence, suggesting that scattering plays a prominent part among the processes that cause the attenuation.The coda ofLg is made up of scatteredS waves. The study of the spatial attenuation of the coda indicated that a large part of the arrivals that compose the coda propagate asLg. The relative amplitude of the coda is larger at sites located on sediments because, in these conditions, a part ofLg energy can be converted locally into lower order surface modes.