The importance of being cratered: The new role of meteorite impact as a normal geological process

Abstract— This paper is a personal (and, in many ways, incomplete) view of the past development of impact geology and of the newly recognized importance of impact events in terrestrial geological history. It also identifies some exciting scientific challenges for future investigators: to determine the full range of impact effects preserved on the Earth, to apply the knowledge obtained from impact phenomena to more general geological problems, and to continue the merger of the once exotic field of impact geology with mainstream geosciences. Since the recognition of an impact event at the Cretaceous‐Tertiary (K‐T) boundary, much current activity in impact geology has been promoted by traditionally trained geoscientists who have unexpectedly encountered impact effects in the course of their work. Their studies have involved: 1) the recognition of additional major impact effects in the geological record (the Chesapeake Bay crater, the Alamo breccia, and multiple layers of impact spherules in Precambrian rocks); and 2) the use of impact structures as laboratories to study general geological processes (e.g., igneous petrogenesis at Sudbury, Canada and Archean crustal evolution at Vredefort, South Africa). Other research areas, in which impact studies could contribute to major geoscience problems in the future, include: 1) comparative studies between low‐level (≤7 GPa) shock deformation of quartz, and the production of quartz cleavage, in both impact and tectonic environments; and 2) the nature, origin, and significance of bulk organic carbon (“kerogen”) and other carbon species in some impact structures (Gardnos, Norway, and Sudbury, Canada).     

Structural characteristics of the Sudbury impact structure,Canada: Impact‐induced versus orogenic deformation—A review

Abstract— Orogenic deformation, both preceding and following the impact event at Sudbury, strongly hinders a straightforward assessment of impact‐induced geological processes that generated the Sudbury impact structure. Central to understanding these processes is the state of strain of the Sudbury Igneous Complex, the solidified impact melt sheet, its underlying target rocks, overlying impact breccias and post‐impact sedimentary rocks. This review addresses (1) major structural, metamorphic and magmatic characteristics of the impact melt sheet and associated dikes, (2) attempts that have been made to constrain the primary geometry of the igneous complex, (3) modes of impact‐induced deformation as well as (4) mechanisms of pre‐ and post‐impact orogenic deformation. The latter have important consequences for estimating parameters such as magnitude of structural uplift, tilting of pre‐impact (Huronian) strata and displacement on major discontinuities which, collectively, have not yet been considered in impact models. In this regard, a mechanism for the emplacement of Offset Dikes is suggested, that accounts for the geometry of the dikes and magmatic characteristics, as well as the occurrence of sulfides in the dikes. Moreover, re‐interpretation of published paleomagnetic data suggests that orogenic folding of the solidified melt sheet commenced shortly after the impact. Uncertainties still exist as to whether the Sudbury impact structure was a peak‐ring or a multi‐ring basin and the deformation mechanisms of rock flow during transient cavity formation and crater modification.     

Revisiting the Gow Lake impact structure,Saskatchewan, Canada

The ~5 km diameter Gow Lake impact structure formed in the Canadian Shield of northern Saskatchewan approximately 197 Myr ago. This structure has not been studied in detail since its discovery during a regional gravity survey in the early 1970s. We report here on field observations from a 2011 expedition that, when combined with subsequent laboratory studies, have revealed a wealth of new information about this poorly studied Canadian impact structure. Initially considered to be a prototypical central peak (i.e., a complex) impact structure, our observations demonstrate that Gow Lake is actually a transitional impact structure, making it one of only two identified on Earth. Despite its age, a well-preserved sequence of crater-fill impactites is preserved on Calder Island in the middle of Gow Lake. From the base upward, this stratigraphy is parautochthonous target rock, lithic impact breccia, clast-rich impact melt rock, red clast-poor impact melt rock, and green clast-poor impact melt rocks. Discontinuous lenses of impact melt-bearing breccia also occur near the top of the red impact melt rocks and in the uppermost green impact melt rocks. The vitric particles in these breccias display irregular and contorted outlines. This, together with their setting within crater-fill melt rocks, is indicative of an origin as flows within the transient cavity and not an airborne mode of origin. Following impact, a hydrothermal system was initiated, which resulted in alteration of the crater-fill impactites. Major alteration phases are nontronite clay, K-feldspar, and quartz.     

Impactites of the Haughton impact structure,Devon Island,Canadian High Arctic

Abstract— Contrary to the previous interpretation of a single allochthonous impactite lithology, combined field, optical, and analytical scanning electron microscopy (SEM) studies have revealed the presence of a series of impactites at the Haughton impact structure. In the crater interior, there is a consistent upward sequence from parautochthonous target rocks overlain by parautochthonous lithic (monomict) breccias, through allochthonous lithic (polymict) breccia, into pale grey allochthonous impact melt breccias. The groundmass of the pale grey impact melt breccias consists of microcrystalline calcite, silicate impact melt glass, and anhydrite. Analytical data and microtextures indicate that these phases represent a series of impact‐generated melts that were molten at the time of, and following, deposition. Impact melt glass clasts are present in approximately half of the samples studied. Consideration of the groundmass phases and impact glass clasts reveal that impactites of the crater interior contain shock‐melted sedimentary material from depths of >920 to <1880 m in the pre‐impact target sequence. Two principal impactites have been recognized in the near‐surface crater rim region of Haughton. Pale yellow‐brown allochthonous impact melt breccias and megablocks are overlain by pale grey allochthonous impact melt breccias. The former are derived from depths of >200 to <760 m and are interpreted as remnants of the continuous ejecta blanket. The pale grey impact melt breccias, although similar to the impact melt breccias of the crater interior, are more carbonate‐rich and do not appear to have incorporated clasts from the crystalline basement. Thus, the spatial distribution of the crater‐fill impactites at Haughton, the stratigraphic succession from target rocks to allochthonous impactites, the recognition of large volumes of impact melt breccias, and their probable original volume are all analogous to characteristics of coherent impact melt layers in comparatively sized structures formed in crystalline targets.     

Formation of uranium‐thorium‐rich bitumen nodules in the Lockne impact structure,Sweden: A mechanism for carbon concentration at impact sites

Abstract— The Ordovician Lockne impact structure is located in central Sweden. The target lithology consisted of limestone and black unconsolidated shale overlaying a Precambrian crystalline basement. The Precambrian basement is uranium‐rich, and the black shale is both uranium‐ and organic‐rich. This circumstance makes Lockne a good candidate for testing the occurrence of U‐Th‐rich bitumen nodules in an impact structure setting. U‐Th‐rich bitumen nodules are formed through irradiation; hence the increase in the complexity of organic matter by a radioactive (uranium‐ and thorium‐rich) mineral phase. U‐Th‐rich bitumen nodules were detected in crystalline impact breccia and resurge deposits from the impact structure, but samples of non‐impact‐affected rocks from outside the impact structure do not contain any U‐Th‐rich bitumen nodules. This implies that in the Lockne impact structure, the nodules are associated with impact‐related processes. U‐Th‐rich bitumen nodules occur throughout the geological record and are not restricted to an impact structure setting, but our studies at Lockne show that this process of irradiation can readily occur in impact structures where fracturing of rocks and a post‐impact hydrothermal system enhances fluid circulation. The irradiation of organic matter by radioactive minerals has previously been proposed as a process for concentration of carbon on the early Earth. Impact structures are suggested as sites for prebiotic chemistry and primitive evolution, and irradiation by radioactive minerals could be an important mechanism for carbon concentration at impact sites.     

Impact megadomes and the origin of the martian crustal dichotomy

We show that a sufficiently energetic impact can generate a melt volume which, after isostatic adjustment and differentiation, forms a spherical cap of crust with underlying depleted mantle. Depending on impact energy and initial crustal thickness, a basin may be retained or impact induced crust may be topographically elevated. Retention of a martian lowland scale impact basin at impact energies ∼3 × 10²⁸-3 × 10²⁹ J requires an initial crustal thickness greater than 10 km. Formation of impact induced crust with size comparable to the martian highlands requires a larger impact energy, ∼1-3 × 10³⁰ J, and initial crustal thickness <20 km. Furthermore, we show that the boundary of impact induced crust can be elliptical due to a spatially asymmetric impact melt volume caused by an oblique impact. We suggest the term “impact megadome” for topographically elevated, impact induced crust and propose that processes involved in megadome formation may play an important role in the origin of the martian crustal dichotomy.     

Impacts onto H2O ice: Scaling laws for melting, vaporization, excavation, and final crater size

Shock-induced melting and vaporization of H₂O ice during planetary impact events are widespread phenomena. Here, we investigate the mass of shock-produced liquid water remaining within impact craters for the wide range of impact conditions and target properties encountered in the Solar System. Using the CTH shock physics code and the new 5-phase model equation of state for H₂O, we calculate the shock pressure field generated by an impact and fit scaling laws for melting and vaporization as a function of projectile mass, impact velocity, impact angle, initial temperature, and porosity. Melt production nearly scales with impact energy, and natural variations in impact parameters result in only a factor of two change in the predicted mass of melt. A fit to the π-scaling law for the transient cavity and transient-to-final crater diameter scaling are determined from recent simulations of the entire cratering process in ice. Combining melt production with π-scaling and the modified Maxwell Z-model for excavation, less than half of the melt is ejected during formation of the transient crater. For impact energies less than about 2 × 10²⁰ J and impact velocities less than about 5 km s⁻¹, the remaining melt lines the final crater floor. However, for larger impact energies and higher impact velocities, the phenomenon of discontinuous excavation in H₂O ice concentrates the impact melt into a small plug in the center of the crater floor.     

Comparison of petrophysical properties of impactites for four meteoritic impact structures

We reanalyzed and compared unique data sets, which we obtained in the frame of combined petrophysical and geothermal investigations within scientific drilling projects on four impact structures: the Puchezh–Katunki impact structure (Vorotilovo borehole, Russia), the Ries impact structure (Noerdlingen‐73 borehole, Germany), the Chicxulub impact structure (ICDP Yaxcopoil‐1 borehole, Mexico), and the Chesapeake impact structure (ICDP‐USGS‐Eyreville borehole, USA). For a joined interpretation, we used the following previously published data: thermal properties, using the optical scanning technique, and porosities, both measured on densely sampled halfcores of the boreholes. For the two ICDP boreholes, we also used our previously published P‐wave velocities measured on a subset of cores. We show that thermal conductivity, thermal anisotropy, porosity, and velocity can be correlated with shock metamorphism (target rocks of the Puchezh–Katunki and Ries impact structures), and confirm the absence of shock metamorphism in the samples taken from megablocks (Chicxulub and Chesapeake impact structure). The physical properties of the lithic impact breccias and suevites are influenced mainly by their impact‐related porosity. Physical properties of lower porosity lithic impact breccias and suevites are also influenced by their chemical composition. These data allow for a distinction between different types of breccias due to differences concerning the texture and chemistry and the different amounts of melt and rock clasts.     

Evolution of the Deep Impact flash: Implications for the nucleus surface based on laboratory experiments

The Deep Impact flyby spacecraft obtained high-speed images of the evolving impact event. Multiple exposures captured a self-luminous impact flash, caused by the heating and vaporization of the cometary surface. Laboratory investigations show that target conditions affect the photometric and spatial evolutions of the impact flash; thus, the flash can be used to constrain the state of the target if the other initial impact conditions are known. Through comparisons of DI flash observations to laboratory impact experiments, the impact flash evolution can be used to determine the type of impact that occurred and to interpret the nature of the impacted Tempel 1 surface. The Deep Impact flash was of relatively long duration, though its luminous efficiency was an order of magnitude lower than expectations. Both uprange and downrange self-luminous plumes were observed. Comparisons of the DI observations with the results of laboratory experiments suggest that the surface of Tempel 1 contains silicates, volatiles, and carbon compounds, and is a highly-porous substrate.     

Campo del Cielo modeling and comparison with observations: II. Funnels and craters

The Campo del Cielo impact structure exhibits several penetration funnels and impact craters. Here, we model the formation of these funnels with pre-impact conditions consistent with the results of meteoroid entry models. We study vertical impacts to find the dependence of funnel geometry (depth, diameter) on impact velocity and target porosity. At velocities above 1 km s⁻¹, we observe strong deformation of the projectile and transformation of funnels into regular impact craters. We also use 3-D impact models to study oblique impacts and find that in the case of impact angles <25° to the horizon, the projectile bounces off the target. Instead of a funnel, an elongated groove forms, while the fragmented projectile escapes and moves farther downrange. At steeper impact angles, funnels form with the projectile at its tip. Early interpretations of the Campo del Cielo impact angle at 9–10° were based on (i) an oversimplified atmospheric model allowing “correct” strewn field elongation and (ii) the results of excavation in which the sloping boundary between breccia-like materials and infilling loess was interpreted as a true crater floor and its slope was equated to the impact angle. As our models show, the projectile trajectory within the target is not a straight line, and the angle to horizon changes from a steep one at the impact point to zero and then to a negative value (the projectile is moving upward). We also model two impact craters (Hoyo de la Cañada and Laguna Negra) created by high-velocity fragments to demonstrate the projectile remnants ricochet in the downrange direction.     

Scaling of oblique impacts in frictional targets: Implications for crater size and formation mechanisms

Almost every meteorite impact occurs at an oblique angle of incidence, yet the effect of impact angle on crater size or formation mechanism is only poorly understood. This is, in large part, due to the difficulty of inferring impactor properties, such as size, velocity and trajectory, from observations of natural craters, and the expense and complexity of simulating oblique impacts using numerical models. Laboratory oblique impact experiments and previous numerical models have shown that the portion of the projectile’s kinetic energy that is involved in crater excavation decreases significantly with impact angle. However, a thorough quantification of planetary-scale oblique impact cratering does not exist and the effect of impact angle on crater size is not considered by current scaling laws. To address this gap in understanding, we developed iSALE-3D, a three-dimensional multi-rheology hydrocode, which is efficient enough to perform a large number of well-resolved oblique impact simulations within a reasonable time. Here we present the results of a comprehensive numerical study containing more than 200 three-dimensional hydrocode-simulations covering a broad range of projectile sizes, impact angles and friction coefficients. We show that existing scaling laws in principle describe oblique planetary-scale impact events at angles greater than 30° measured from horizontal. The displaced mass of a crater decreases with impact angle in a sinusoidal manner. However, our results indicate that the assumption that crater size scales with the vertical component of the impact velocity does not hold for materials with a friction coefficient significantly lower than 0.7 (sand). We found that increasing coefficients of friction result in smaller craters and a formation process more controlled by impactor momentum than by energy.     

Azimuthal impact directions from oblique impact crater morphology

Planetary impact craters have a high degree of radial symmetry. This hampers efforts to identify the azimuthal impact direction for most craters – the radially symmetric component of an impact crater swamps any asymmetries that may be present. We demonstrate how the asymmetric component can be isolated and the direction of the asymmetries quantified using a two-dimensional eigenfunction expansion over a circular domain. The complex coefficients of expansion describe the magnitude and phase (angular alignment) of each term. From the analysis of hypervelocity impact craters formed in the laboratory, with impact angles ranging from 0° to 50° from the surface normal, we show that asymmetries which reveal the impact direction are still present at just 10° from the surface normal, and that the phase of one complex coefficient of expansion, c ₁₁, indicates the impact direction. Analysis of the lunar crater Hadley shows bilateral symmetry in the radially asymmetric component, which may be due to oblique impact. The 31-km lunar ray crater Kepler has morphological features that indicate the azimuthal impact direction. Coefficient c ₁₁ gives an azimuthal impact direction similar to that expected from the morphology, although post-impact gravitational collapse and slumping obscure the result to some degree. Ray craters may provide a means of testing the method for smaller 'simple' craters when data are available.     

Population vulnerability models for asteroid impact risk assessment

An asteroid impact is a low probability event with potentially devastating consequences. The Asteroid Risk Mitigation Optimization and Research (ARMOR) software tool calculates whether a colliding asteroid experiences an airburst or surface impact and calculates effect severity as well as reach on the global map. To calculate the consequences of an impact in terms of loss of human life, new vulnerability models are derived that connect the severity of seven impact effects (strong winds, overpressure shockwave, thermal radiation, seismic shaking, ejecta deposition, cratering, and tsunamis) with lethality to human populations. With the new vulnerability models, ARMOR estimates casualties of an impact under consideration of the local population and geography. The presented algorithms and models are employed in two case studies to estimate total casualties as well as the damage contribution of each impact effect. The case studies highlight that aerothermal effects are most harmful except for deep water impacts, where tsunamis are the dominant hazard. Continental shelves serve a protective function against the tsunami hazard caused by impactors on the shelf. Furthermore, the calculation of impact consequences facilitates asteroid risk estimation to better characterize a given threat, and the concept of risk as well as its applicability to the asteroid impact scenario are presented.     

The Dhala structure,Bundelkhand craton,Central India—Eroded remnant of a large Paleoproterozoic impact structure

Abstract— The newly discovered Dhala structure, Madhya Pradesh State, India, is the eroded remnant of an impact structure with an estimated present‐day apparent diameter of about 11 km. It is located in the northwestern part of the Archean Bundelkhand craton. The pre‐impact country rocks are predominantly granitoids of ?2.5 Ga age, with minor 2.0–2.15 Ga mafic intrusive rocks, and they are overlain by post‐impact sediments of the presumably >1.7 Ga Vindhyan Supergroup. Thus, the age for this impact event is currently bracketed by these two sequences. The Dhala structure is asymmetrically disposed with respect to a central elevated area (CEA) of Vindhyan sediments. The CEA is surrounded by two prominent morphological rings comprising pre‐Vindhyan arenaceous‐argillaceous and partially rudaceous metasediments and monomict granitoid breccia, respectively. There are also scattered outcrops of impact melt breccia exposed towards the inner edge of the monomict breccia zone, occurring over a nearly 6 km long trend and with a maximum outcrop width of ?170 m. Many lithic and mineral clasts within the melt breccia exhibit diagnostic shock metamorphic features, including multiple sets of planar deformation features (PDFs) in quartz and feldspar, ballen‐textured quartz, occurrences of coesite, and feldspar with checkerboard texture. In addition, various thermal alteration textures have been found in clasts of initially superheated impact melt. The impact melt breccia also contains numerous fragments composed of partially devitrified impact melt that is mixed with unshocked as well as shock deformed quartz and feldspar clasts. The chemical compositions of the impact melt rock and the regionally occurring granitoids are similar. The Ir contents of various impact melt breccia samples are close to the detection limit (1–1.5 ppb) and do not provide evidence for the presence of a meteoritic component in the melt breccia. The presence of diagnostic shock features in mineral and lithic clasts in impact melt breccia confirm Dhala as an impact structure. At 11 km, Dhala is the largest impact structure currently known in the region between the Mediterranean and southeast Asia.     

Hydrocode modeling of oblique impacts: The fate of the projectile

Abstract— All impacts are oblique to some degree. Only rarely do projectiles strike a planetary surface (near) vertically. The effects of an oblique impact event on the target are well known, producing craters that appear circular even for low impact angles (>15° with respect to the surface). However, we still have much to learn about the fate of the projectile, especially in oblique impact events. This work investigates the effect of angle of impact on the projectile. Sandia National Laboratories' three‐dimensional hydrocode CTH was used for a series of high‐resolution simulations (50 cells per projectile radius) with varying angle of impact. Simulations were carried out for impacts at 90, 60, 45, 30, and 15° from the horizontal, while keeping projectile size (5 km in radius), type (dunite), and impact velocity (20 km/s) constant. The three‐dimensional hydrocode simulations presented here show that in oblique impacts the distribution of shock pressure inside the projectile (and in the target as well) is highly complex, possessing only bilateral symmetry, even for a spherical projectile. Available experimental data suggest that only the vertical component of the impact velocity plays a role in an impact. If this were correct, simple theoretical considerations indicate that shock pressure, temperature, and energy would depend on sin²θ, where θ is the angle of impact (measured from the horizontal). However, our numerical simulations show that the mean shock pressure in the projectile is better fit by a sin θ dependence, whereas shock temperature and energy depend on sin^3/2 θ. This demonstrates that in impact events the shock wave is the result of complex processes that cannot be described by simple empirical rules. The mass of shock melt or vapor in the projectile decreases drastically for low impact angles as a result of the weakening of the shock for decreasing impact angles. In particular, for asteroidal impacts the amount of projectile vaporized is always limited to a small fraction of the projectile mass. In cometary impacts, however, most of the projectile is vaporized even at low impact angles. In the oblique impact simulations a large fraction of the projectile material retains a net downrange motion. In agreement with experimental work, the simulations show that for low impact angles (30 and 15°), a downrange focusing of projectile material occurs, and a significant amount of it travels at velocities larger than the escape velocity of Earth.     

The Gao‐Guenie impact melt breccia—Sampling a rapidly cooled impact melt dike on an H chondrite asteroid?

The Gao‐Guenie H5 chondrite that fell on Burkina Faso (March 1960) has portions that were impact‐melted on an H chondrite asteroid at ~300 Ma and, through later impact events in space, sent into an Earth‐crossing orbit. This article presents a petrographic and electron microprobe analysis of a representative sample of the Gao‐Guenie impact melt breccia consisting of a chondritic clast domain, quenched melt in contact with chondritic clasts, and an igneous‐textured impact melt domain. Olivine is predominantly Fo_80–82. The clast domain contains low‐Ca pyroxene. Impact melt‐grown pyroxene is commonly zoned from low‐Ca pyroxene in cores to pigeonite and augite in rims. Metal–troilite orbs in the impact melt domain measure up to ~2 mm across. The cores of metal orbs in the impact melt domain contain ~7.9 wt% of Ni and are typically surrounded by taenite and Ni‐rich troilite. The metallography of metal–troilite droplets suggest a stage I cooling rate of order 10 °C s^?1 for the superheated impact melt. The subsolidus stage II cooling rate for the impact melt breccia could not be determined directly, but was presumably fast. An analogy between the Ni rim gradients in metal of the Gao‐Guenie impact melt breccia and the impact‐melted H6 chondrite Orvinio suggests similar cooling rates, probably on the order of ~5000–40,000 °C yr^?1. A simple model of conductive heat transfer shows that the Gao‐Guenie impact melt breccia may have formed in a melt injection dike ~0.5–5 m in width, generated during a sizeable impact event on the H chondrite parent asteroid.     

Effect of volatiles and target lithology on the generation and emplacement of impact crater fill and ejecta deposits on Mars

Abstract— Impact cratering is an important geological process on Mars and the nature of Martian impact craters may provide important information as to the volatile content of the Martian crust. Terrestrial impact structures currently provide the only ground‐truth data as to the role of volatiles and an atmosphere on the impact‐cratering process. Recent advancements, based on studies of several well‐preserved terrestrial craters, have been made regarding the role and effect of volatiles on the impact‐cratering process. Combined field and laboratory studies reveal that impact melting is much more common in volatile‐rich targets than previously thought, so impact‐melt rocks, melt‐bearing breccias, and glasses should be common on Mars. Consideration of the terrestrial impact‐cratering record suggests that it is the presence or absence of subsurface volatiles and not the presence of an atmosphere that largely controls ejecta emplacement on Mars. Furthermore, recent studies at the Haughton and Ries impact structures reveal that there are two discrete episodes of ejecta deposition during the formation of complex impact craters that provide a mechanism for generating multiple layers of ejecta. It is apparent that the relative abundance of volatiles in the near‐surface region outside a transient cavity and in the target rocks within the transient cavity play a key role in controlling the amount of fluidization of Martian ejecta deposits. This study shows the value of using terrestrial analogues, in addition to observational data from robotic orbiters and landers, laboratory experiments, and numerical modeling to explore the Martian impact‐cratering record.     

A Middle‐Late Triassic 40Ar/39Ar age for the Paasselkä impact structure (SE Finland)

Abstract– ⁴⁰Ar/³⁹Ar dating of recrystallized feldspar glass particles separated from clast‐rich impact melt rocks from the approximately 10 km Paasselkä impact structure (SE Finland) yielded a Middle to Late Triassic (Ladinian‐Karnian) pseudo‐plateau age of 228.7 ± 3.0 (3.4) Ma (2σ). This new age makes Paasselkä the first known Triassic impact structure dated by isotopic methods on the Baltic Shield. The new Paasselkä impact age is, within uncertainty, coeval with isotopic ages recently obtained for the Lake Saint Martin impact structure in Canada, indicating a new Middle to Late Triassic impact crater population on Earth. The comparatively small crater size, however, suggests no relationship between the Paasselkä impact and a postulated extinction event at the Middle/Late Triassic boundary.     

What metal‐troilite textures can tell us about post‐impact metamorphism in chondrite meteorites

Abstract— Metal‐troilite textures are examined in metamorphosed and impact‐affected ordinary chondrites to examine the response of these phases to rapid changes in temperature. Complexly intergrown metal‐troilite textures are shown to form in response to three different impact‐related processes. (1) During impacts, immiscible melt emulsions form in response to spatially focused heating. (2) Immediately after impact events, re‐equilibration of heterogeneously distributed heat promotes metamorphism adjacent to zones of maximum impact heating. Where temperatures exceed ～850 ° C, this post‐impact metamorphism results in melting of conjoined metal‐troilite grains in chondrites that were previously equilibrated through radiogenic metamorphism. When the resulting Fe‐Ni‐S melt domains crystallize, a finely intergrown mixture of troilite and metal forms, which can be zoned with kamacite‐rich margins and taenite‐rich cores. (3) At lower temperatures, post‐impact metamorphism can also cause liberation of sulfur from troilite, which migrates into adjacent Fe‐Ni metal, allowing formation of troilite and occasionally copper within the metal during cooling. Because impact events cause heating within a small volume, post‐impact metamorphism is a short duration event (days to years) compared with radiogenic metamorphism (>10⁶ years). The fast kinetics of metal‐sulfide reactions allows widespread textural changes in conjoined metal‐troilite grains during post‐impact metamorphism, whereas the slow rate of silicate reactions causes these to be either unaffected or only partially annealed, except in the largest impact events. Utilizing this knowledge, information can be gleaned as to whether a given meteorite has suffered a post‐impact thermal overprint, and some constraints can be placed on the temperatures reached and duration of heating.