安徽铜陵朝山金矿床稳定同位素、稀土元素地球化学研究

朝山金矿床位于安徽铜陵狮子山矿田，属于矽卡岩型金矿床，侵入岩体为白芒山辉石二长闪长岩体。成矿过程包括矽卡岩阶段、石英-硫化物阶段和碳酸盐阶段3个主要成矿阶段。文章通过对朝山金矿床的氢、氧、碳、硫、硅同位素组成和稀土元素地球化学特征的研究，探讨成矿溶液中水、碳、硅和硫的来源以及成矿溶液的演化问题。研究表明，成矿热液早期以岩浆热液为主，随着成矿过程的进行，加入的大气降水比重越来越大，到晚期可能主要以大气降水为主。该矿床矿石中方解石的碳、氧同位素组成与矿区大理岩的碳、氧同位素组成明显不同，其δ^13 Cv-PDB、δ^18OV-SMOW值分别为-4．5～-5．3‰、13．9～14．0‰，与岩浆作用形成的CO2的碳、氧同位素组成一致，表明矿石中方解石的碳、氧来源于岩浆作用。硅和硫具深部岩浆或岩浆热液来源的特点。     

滇西北羊拉铜矿床稳定同位素特征及其地质意义

云南羊拉铜矿床位于金沙江构造带中部,是中-晚三叠世金沙江洋盆向西俯冲闭合-碰撞造山过程中形成的一个大型铜矿床.矿体多呈层状、似层状产出,与酸性岩体关系密切,矿体受岩体、围岩和构造“三位一体”共同控制,具明显的夕卡岩型矿床特征.通过对矿区大理岩以及不同成矿阶段形成的典型矿物的稳定同位素地球化学研究,发现夕卡岩中最主要的矿物石榴石的δ18OSMOW为6.7‰,暗示了夕卡岩可能直接继承了酸性岩体的氧同位素组成;主成矿期石英的δD值变化范围为-112‰～-77‰,δ18OH2o值变化范围为-2.42‰～4.85‰,反映了成矿流体可能主要为岩浆水,并有大气降水的加入;方解石的δ13CPDB值变化范围为-5.2‰～-1.7‰,δ18 OSMOW值变化范围为12.7‰～ 20.1‰,表明其碳、氧可能主要来源于岩浆,部分可能来自于大理岩;围岩大理岩的δ13CPDB值为3.6‰～5.0‰,δ18 OSMOW值为21.2‰～ 25.4‰,说明大理岩是由海相碳酸盐岩经重结晶作用形成,随着大理岩与矿体距离的减小,其δ13C、δ18O值都有不断降低的趋势,说明在成矿流体交代大理岩围岩的过程中,低δ13C、δ18O值的流体不断与大理岩发生同位素交换,使大理岩的δ13C、δ18O值降低,且距离矿体越近,同位素交换越强烈;矿石硫化物的δ34S值为-6.9‰～2.5‰,集中于-2‰～1‰,说明矿石硫主要为岩浆硫.综上所述并结合矿床的地质特征,认为羊拉铜矿床为一个典型的夕卡岩型铜矿床.     

湖南祁东清水塘铅锌矿床成矿物质来源同位素示踪

清水塘铅锌矿床位于湖南省祁东县北东部,是一个中型矿床。在详细的野外地质调查基础上,本文通过矿石硫、铅同位素,含矿石英氢、氧同位素和含矿方解石碳、氧同位素等综合研究,探讨清水塘铅锌矿床成矿物质来源和成因。硫同位素研究结果表明,清水塘铅锌矿床中黄铁矿、方铅矿和闪锌矿的硫同位素δ~(34)S介于-7.41‰~2.91‰之间,重晶石的硫同位素δ~(34)S介于11.49‰~12.34‰之间,表明矿石中的硫主要来源于深源岩浆,并受到上部地壳物质的混染。黄铁矿、方铅矿和闪锌矿的Pb同位素~(206)Pb/~(204)Pb介于17.810~18.710之间,~(207)Pb/~(204)Pb介于15.497~15.726之间,~(208)Pb/~(204)Pb介于37.858~38.834之间;其中闪锌矿变化范围略偏大,表明矿石中的铅主要来源于地壳,可能混有少量地幔物质。含矿石英的氢、氧同位素δD_(SMOW)介于-87.4‰~-79.3‰之间,δ~(18)O_(H_2O)介于-8.10‰~0.63‰之间,表明成矿流体以岩浆水为主,晚期有大气降水的混入。含矿方解石的碳、氧同位素δ~(13)C_(VPDB)介于-5.3‰~-4.6‰之间,δ~(18)O_(SMOW)介于12.30‰~13.48‰之间;与地层灰岩的δ~(13)C_(VPDB)(0.9‰~2.6‰),δ~(18)O_(SMOW)(21.86‰~23.39‰)不一致;说明成矿流体中的碳主要来自深源岩浆。以上研究表明,清水塘铅锌矿床的成矿物质主要来自地壳熔融形成的岩浆,混合作用是成矿的主要机制。     

滇西北衙金矿方解石的碳氧同位素特征及其成因

北衙金矿床是金沙江-哀牢山富碱侵入岩带上迄今发现的与富碱侵入岩有关的最重要的金矿床.方解石是北衙金矿体中的主要脉石矿物,其形成与金矿化关系密切.本文在划分方解石期次基础上,定量模拟了北衙金矿方解石的碳、氧同位素成因模式.该模式暗示:北衙金矿方解石为碳酸盐蚀变(重结晶)成因,与Ⅱ期方解石形成有关的主成矿期流体的C、O同位素组成分别为δ13C=-5.5‰,δ18 O=10.5‰,具典型的岩浆流体特征;而与Ⅲ期方解石形成有关的晚期流体的C、O同位素组成相对较低,分别为δ13C=-12‰,δ18 O=7‰,说明部分地加入了大气降水.     

湖南常宁康家湾铅锌矿床同位素地球化学研究

在详细的野外地质工作基础上,本文通过矿石硫、铅同位素,含矿石英的氢、氧同位素,以及含矿方解石的碳、氧同位素组成等综合研究,探讨康家湾铅锌矿床成矿物质来源和形成机制。结果显示矿石的δ34SVCDT介于-2.71‰~-0.90‰之间,均值为-1.42‰,表明矿石中的硫主要来自深部岩浆,可能受到地壳物质混染。矿石铅同位素206Pb/204Pb介于18.227~18.573之间,均值为18.485;207Pb/204Pb介于15.661~15.695之间,均值为15.682;208Pb/204Pb介于38.673~38.964之间,均值为38.820;铅同位素组成比较均一,具有放射铅的特征,表明成矿物质主要来源地壳,混有少量地幔物质。含矿石英中的δDSMOW介于-68.00‰~﹣60.00‰之间,均值为-64.00‰;δ18OH2O介于-7.25‰~-5.17‰之间,均值为-6.23‰;氢、氧同位素组成研究显示,成矿流体早期以岩浆水为主,后期混有大气降水。含矿方解石中的δC VPDB介于-0.50‰~0.30‰之间,均值为0‰;δ18OSMOW介于14.10‰~16.80‰之间,均值为14.40‰;含矿方解石中的碳、氧同位素与地层灰岩中的碳、氧同位素值大致相近,表明矿石中碳主要来源于晚古生代地层中的灰岩。以上研究表明,康家湾铅锌矿床的成矿物质主要来自地壳,混有少量地幔物质,混合作用可能是矿床形成的主要机制。     

云南澜沧老厂大型银多金属矿床碳、氧同位素组成及其意义

文章系统研究了老厂矿床的碳酸盐围岩和成矿方解石的碳、氧同位素组成.研究表明,相对于区域地层,矿区碳酸盐岩围岩普遍亏损18O;成矿方解石的碳氧同位素总体上具有明显的正相关性,这些特征表明成矿流体与围岩发生了大规模的水岩反应.文章初步建立了水岩反应的理想模式,根据该模式进一步将成矿方解石划分为矿体中心相和边缘相2组.水岩反应理论模拟表明:总体上成矿流体中的可溶性碳以H2CO3为主,中心相成矿流体的δ13C、δ18O值分别为-5.5‰和+4‰,具有典型深部岩浆流体的特征;边缘相成矿流体的δ13C、δ18O值分别为-1.5‰和+4‰,代表了深部岩浆流体与下渗天水共同交代碳酸盐岩围岩后的碳、氧同位素特征.     

白云鄂博富稀土元素碳酸岩墙的 碳和氧同位素特征

重点解剖了一条距白云鄂博超大型REE-Nb-Fe矿床东矿北东方向2 k m、切割白云鄂 博群H1及H3岩性段的细粒方解石碳酸岩岩墙的碳和氧同位素地球化学特征。结果表明,碳酸 岩的碳同位素组成变化范围较小(δ13C值为－6.6‰ ～ －4.6‰),与正常地幔碳δ 13C值－5±2‰一致;而氧同位素组成变化范围较大(δ18O值为11.9‰～17.7‰ ),显著高于地幔的δ18O值5.7±1.0‰,表明碳酸岩浆在结晶过程中或之后曾与 低 温热液流体发生了同位素交换。碳酸岩墙中白云石与方解石之间的碳和氧同位素分馏均小于 0‰,处于不平衡状态,说明该碳酸岩墙中的白云石与方解石并非同成因矿物,白云石可能 为次生成因的。     

湖南柿竹园矿田柴山铅锌矿床的C、O同位素组成及其研究意义

研究了柿竹园矿田柴山铅锌矿床早、晚期方解石的C、O同位素组成,并对C、O同位素组成之间明显的正相关关系进行了CO2去气、流体混合与水．岩反应的理论模拟。结果表明,该矿床方解石的形成主要是由成矿流体与围岩发生水-岩反应及温度降低造成的,另外大气降水的加入也起到一定的作用。成矿流体中的可溶性碳以H2CO3为主,早期成矿流体的δ^13C、δ^18O值分别为-2．5‰＋4‰,晚期成矿流体的δ^13C、δ^18O值分别为-1‰和＋6‰,并且在成矿过程中一直有中生代大气降水的加入。     

湘中锡矿山超大型锑矿床的碳、氧同位素体系

本文系统地研究了锡矿山锑矿床的围岩、蚀变围岩和热液成因方解石的碳、氧同位素组成。研究表明，相对于区域地层，矿区灰岩明显亏损^18O；围岩蚀变过程中，围岩的δ^18O值趋于减小并有明显的空间变化趋势。不同期次方解石的碳、氧同位素特征明显不同：成矿早期显示出深特征；成矿晚期方解石的碳、氧同位素组成呈正相关，为水－岩反应和温度降低耦合作用所致；成矿期后方解石的碳、氧同位素组成呈明显的负相关，这种方解石的沉淀介质成成矿流体明显不同。水－岩反应的理论模拟显示，成矿流体不可能为未经深部循环的大气降水；成矿流体中的可溶性碳以H2CO3为主；早期成矿流体的δ^13C、δ^18O分别为－6‰、＋10‰，晚期成矿流体的δ^13C、δ^18O分别为0‰、4‰。     

滇西北保山核桃坪铅锌矿床成矿流体来源的同位素地球化学证据

滇西北核桃坪铅锌矿是保山地块内沿澜沧江断裂带发育的一个大型铅锌多金属矿床,矿体严格受近SN向的断裂带及层间破碎带控制,赋存于上寒武统核桃坪组和沙河厂组大理岩化灰岩及矽卡岩中。文章在分析矿床地质特征的基础上,通过对V1矿体的氢、氧、碳、硫、硅和铅同位素地球化学的示踪研究,探讨了成矿溶液中水、碳、硅、硫和铅的来源以及成矿流体的演化问题。研究表明,V1矿体中矿石的石英δ18O水值变化范围为6·1‰~7·6‰,平均为6·7‰,其δDV-SMOW值变化范围为-100‰~-108‰,平均为-104‰,说明成矿流体主要来自深部岩浆分异水,并在后期成矿作用过程中有地层建造水和大气降水的加入;矿石中方解石的δ13CV-PDB和δ18O水值分别为-6·6‰~-5·9‰和5·0‰~5·2‰,反映成矿流体的碳、氧具有深部流体与围岩发生交代反应的特征。硅、硫和铅同位素具深部岩浆或地幔来源的特点,但遭受后期壳源物质的混染。据此提出该矿床是与深部岩浆热液或幔源流体贯入有关的构造热液脉型矿床,其成矿作用受控于深部过程的驱动和控制,可为指导地质找矿提供依据。     

Wavelength-dispersive X-ray fluorescence spectrometric determination of Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites

Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours.     

硅酸盐类样品中硅、铁、铝、钛、锰、钙、镁、钾、钠和磷的x射线荧光光谱测定

本文拟定了一种以熔融法制备样片,用X射线荧光光谱测定硅酸盐类样品中Si、Fe、Al、Tj、Mn、Ca、Mg、K、Na、P等元素的分析方法。在对不同靶材X光管和分光晶体实验对比的基础上,选择了最佳的测量条件。该法具有快速、准确,测量范围广,检测限低,价格便宜等优点。经过近百个各种类型标样或管理样品的分析对比表明,本法不仅适用于硅酸盐类岩石样品的分析,还适用于铁矿、铝土矿、碳酸盐类岩矿样品以及水泥、耐火材料等样品的分析。     

高压微波消解法测定醋酸纤维过滤器采集的微尘粒子中的砷镉钴铬铜铁锰镍铅钒锌

最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提     

Isotopic systematics of He,Ar, S,Cu, Ni,Re, Os,Pb, U,Sm, Nd,Rb, Sr,Lu, and Hf in the rocks and ores of the Norilsk deposits

This paper reports the first results of a study of 11 isotope systems (³He/⁴He, ⁴⁰Ar/³⁶Ar, ³⁴S/³²S, ⁶⁵Cu/⁶³Cu, ⁶²Ni/⁶⁰Ni, ⁸⁷Sr/⁸⁶Sr, ¹⁴³Nd/¹⁴⁴Nd, ^206–208Pb/²⁰⁴Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others.     

Viscous, cohesive, non-Newtonian, depositing, radial slurry flow

Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance.     

硅酸盐中铁、锰、钛、钙、钾、磷、硅、铝、镁、钠、锶、铷、钡的X-射线荧光光谱定量测定

本文介绍样品经四硼酸锂熔融制成玻璃小饼。采用Lachance模式和理论a系数来校正元素间的效应,由3080E型X-射线荧光谱仪和DF-350B数据处理系统完成硅酸盐中十三个项目的测定。     

岩石密度和超高压岩石折返速率

在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。     

Bellechester,Minnesota, USA,lagoon collapses

Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×10⁶ 1 of partially treated effluent and about 600 m³ of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes.     

滇东南花岗岩与锡、银、铜、铅、锌多金属矿床的成因关系

滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床.     

Mercury,arsenic, antimony,and selenium contents of sediment from the Kuskokwim River,Bethel, Alaska,USA

The Kuskokwim River at Bethel, Alaska, drains a major mercury-antimony metallogenic province in its upper reaches and tributaries. Bethel (population 4000) is situated on the Kuskokwim floodplain and also draws its water supply from wells located in river-deposited sediment. A boring through overbank and floodplain sediment has provided material to establish a baseline datum for sediment-hosted heavy metals. Mercury (total), arsenic, antimony, and selenium contents were determined; aluminum was also determined and used as normalizing factor. The contents of the heavy metals were relatively constant with depth and do not reflect any potential enrichment from upstream contaminant sources.