共查询到20条相似文献,搜索用时 15 毫秒
1.
The technique of linear digital filtering as developed for the direct interpretation of Schlumberger and Wenner soundings (Ghosh 1971) has been applied here for the derivation of the resistivity transform function from the field dipole measurements as the first step in directly interpreting dipole data. Filter coefficients for this transformation have been worked out for the radial-polar, perpendicular and parallel (30°) arrays of dipole sounding. The procedure combines speed with accuracy. 相似文献
2.
D. P. GHOSH 《Geophysical Prospecting》1971,19(4):769-775
In this paper a fast method is developed for computing apparent resistivity curves for known layer configurations. The method is based on the application of a linear filter to determine the apparent resistivity curve from, the kernel function. 相似文献
3.
A simple extension of our previous work in which digital filters were developed to transform dipole resistivity measurements over layered earth to Schlumberger ones leads us to the development of filters for transforming the latter to the former. As in the previous work we use a sampling interval of 1/6 In 10 in designing the filters that are both accurate and fast in operation. 相似文献
4.
In this paper a technique for computing type curves for the two-electrode resistivity soundings is presented. It is shown that the apparent resistivity due to the system can be represented by a convolution integral. Thus, it is possible to apply the principle of digital linear filtering and compute the desired type-curves. The filter function required for the purpose is found to be identical with that used to compute the EM sounding curves for the two coplanar horizontal loop system. It is further shown that from the two-electrode apparent-resistivity expression one can easily derive the apparent resistivities for other configurations. A comparison of depths of investigation for various systems reveals that the two-electrode system has greater depth of investigation than other conventional systems. This is also supported by the field example presented in the end, which illustrates the relative performance of the two-electrode system vis-a-vis the Wenner system. 相似文献
5.
Dipole sounding resistivity measurements over layered earth can be interpreted directly by adapting the procedure given by Koefoed (1968) for Schlumberger system. To carry out the first step of the interpretation leading to the determination of the raised kernel function, partial resistivity functions for the dipole method are derived and given in the form of standard curves. The second step involving the derivation of layering parameters from the kernel being independent of the electrode configurations remains unaltered. The applicability and limitations of the method are discussed. 相似文献
6.
Linear relationship between dipole and Schlumberger sounding resistivities leads to the use of digital filters to transform the former to the latter. This transformation is of importance from the viewpoint that Schlumberger interpretational techniques and know-how could then be applied to the pseudo-Schlumberger field curve. Filters for this transformation are presented for the radial, perpendicular, and parallel (30°) dipole method. The characteristics of these filters are similar to the ones for transforming dipole data to the kernel and are favourable in that they do not amplify noise. A sampling interval of (In 10) /6 has been used in determining the filter yielding good accuracy. Like previous filters the present one is handy and fast in operation. 相似文献
7.
The computation method described in this paper is based on the existence of a linear relationship between the mutual coupling ratio and the kernel function in the integral expression for it. Accordingly, the mutual coupling ratio can be determined by first computing sample values of the kernel function and then subjecting these to a digital linear filter. In the present paper the appropriate sampling distance is determined and the values of the digital filter coefficients are computed, both for electromagnetic sounding with horizontal coils and for electromagnetic sounding with perpendicular coils. 相似文献
8.
This paper presents a digital linear filter which maps composite resistivity transforms to apparent resistivities for any four—electrode array over a horizontally layered earth. A filter is provided for each of three sampling rates; the choice of filter will depend on resistivity contrasts and computational facilities. Two methods of filter design are compared. The Wiener-Hopf least-squares method is preferable for low sampling rate filters. The Fourier transform method is more successful in producing a filter with a high sampling rate which can handle resistivity contrasts of 100 000: 1. 相似文献
9.
With the aim of studying the behaviour of geoelectric axial dipole vertical soundings over complex geology, a systematic theoretical approach is presented for a class of earth structures characterized by horizontal and vertical parallel boundary planes. The two-dimensional cylindrical bodies of infinite length and rectangular cross-section are constrained to have resistivities satisfying Alfano's condition at every intersection line of the graticule, in order to adopt the image-point theory. A detailed analysis is performed for models with any number of horizontal boundaries and two vertical discontinuities. The apparent resistivity formulas are obtained and selected apparent resistivity curves are drawn for different parameter combinations and various directions of the sounding expansion axis. The class under consideration contains as a particular case the HVC model elaborated in Alpin's monograph, where only a small collection of master curves is available for the axial array. The reconstruction of those curves by the present formulation shows the existence of large discrepancies. A test based on the transformation to equivalent half-Schlumberger sounding curves supports the conclusion that an unidentified error must exist in some part of the theoretical approach of the Russian researchers. Finally, some field sounding curves based on geothermal and volcanological surveys are presented and interpreted by complete curve matching, essentially to show the applicability of the theoretical solutions. 相似文献
10.
A. T. BASOKUR 《Geophysical Prospecting》1983,31(4):649-663
The technique of digital linear filtering is used for transformation of apparent resistivity data from one electrode configuration into another. Usually filter spectra are determined via the discrete Fourier transforms of input and output functions: the filter characteristic is the quotient of the spectra of the output function and input function. In this paper, the transformation of the apparent resistivities is presented for four electrode configurations (Wenner, the two-electrode, Schlumberger, and dipole configurations). In our method, there is no need to use the discrete Fourier transform of the input and output functions in order to determine the filter spectrum for converting apparent resistivity in one electrode configuration to any other configuration. Sine responses for determination of the derivative of apparent resistivities are given in analytical form. If the filter spectrum for converting the apparent resistivity to the resistivity transform for one electrode configuration is known, the filter spectra for transforming the apparent resistivity to the resistivity transform for any electrode configurations can be calculated by using newly derived expressions. 相似文献
11.
O. KOEFOED 《Geophysical Prospecting》1972,20(2):403-405
In the linear filter method of interpreting resistivity sounding data, as developed by Ghosh (1971), it appears that the filter function in the x-domain approaches an oscillating function for both large positive and large negative abscissa values. In the present note the reason for this oscillating behaviour is derived, and a possible practical application is indicated. 相似文献
12.
The values of the filter coefficients used for the computation of electromagnetic sounding curves are studied in conjunction with the values of the input function to the filter, or the range of values which the input function may assume, and the filters are broken off at such a place that the error in the sum of the products of filter coefficient and input function does not exceed a prescribed value. This analysis is carried out for the horizontal coils system, the perpendicular coils system, and the vertical coplanar coils system. The lengths of the filters so derived depend on the layer parameters, the frequency and the coil spacing. Even in the most unfavourable cases the filters are shorter than the filters published by Koefoed, Ghosh, and Polman (1972). 相似文献
13.
It has been found that the Wiener-Hopf least-squares method is a very successful tool for the determination of resistivity sounding filters. The values of the individual filter coefficients differ quite appreciably from those obtained by the Ghosh procedure. These differences in the filter coefficients, however, have only a negligible effect on the output of the filter. It seems that these differences in the coefficients correspond to a filter function of a rather narrow frequency band around the Nyquist frequency, which is only very weakly present in the input and output functions. 相似文献
14.
D. P. GHOSH 《Geophysical Prospecting》1971,19(2):192-217
Koefoed has given practical procedures of obtaining the layer parameters directly from the apparent resistivity sounding measurements by using the raised kernel function H(λ) as the intermediate step. However, it is felt that the first step of his method—namely the derivation of the H curve from the apparent resistivity curve—is relatively lengthy. In this paper a method is proposed of determining the resistivity transform T(λ), a function directly related to H(λ), from the resistivity field curve. It is shown that the apparent resistivity and the resistivity transform functions are linearily related to each other such that the principle of linear electric filter theory could be applied to obtain the latter from the former. Separate sets of filter coefficients have been worked out for the Schlumberger and the Wenner form of field procedures. The practical process of deriving the T curve simply amounts to running a weighted average of the sampled apparent resistivity field data with the pre-determined coefficients. The whole process could be graphically performed within an quarter of an hour with an accuracy of about 2%. 相似文献
15.
D. PATELLA 《Geophysical Prospecting》1974,22(2):315-329
A method is described to transform a dipole sounding curve, obtained with any one of the common dipole arrays over a horizontally layered earth, to the form of a Schlumberger sounding curve. Starting from the general expression which relates the dipole apparent resistivity to the Schlumberger apparent resistivity and its derivative with respect to the spacing, it is possible with some approximations to derive an easy numerical computation procedure in order to perform the transformation. The applicability of the method is discussed briefly. 相似文献
16.
A. T. BAOKUR 《Geophysical Prospecting》1984,32(1):132-138
Different sets of filter coefficients for the linear filter technique for the computations of resistivity and EM sounding curves are evaluated for several electrode and coil configurations. Instead of this procedure, the two-electrode filter can be used for computations of Wenner, Schlumberger, and dipole—dipole apparent resistivity model curves by defining convolutional expressions which contain the new input functions in terms of the resistivity transform function. Similarly, the Schlumberger filter performs the computations of dipole—dipole apparent resistivity model curves. The Wenner, Schlumberger, and dipole—dipole filter functions are defined in terms of the two-electrode filter using the new convolutional expressions. A relationship between the Schlumberger and dipole—dipole filter functions is given. The above arguments are adopted for the computations of EM sounding curves. It is shown that the EM filter for the horizontal coplanar loop system (which is identical to the two-electrode filter) performs the computations of the mutual coupling ratios for perpendicular, vertical coplanar, and vertical coaxial loop systems. In the same way, the Schlumberger filter can be used to compute vertical coaxial sounding curves. The corresponding input functions are defined in terms of the EM kernel for all convolutional expressions presented. After these considerations, integral expressions of the mutual coupling ratios involving zero-order Bessel function are derived. The mutual coupling ratio for the vertical coaxial loop system is given in the same form as the mutual coupling ratio for the vertical coplanar loop system. 相似文献
17.
O. KOEFOED 《Geophysical Prospecting》1979,27(4):862-868
Mallick and Roy solved the problem of determining the apparent resistivity function for a three-layer stratification in which the central layer is a transition layer with linear change of the conductivity with depth. In the present paper the problem is solved for a transition layer with linear change of the resistivity with depth, a type of change that seems to be more common in nature than the type considered by Mallick and Roy. The solution is extended to layer stratifications involving an arbitrary number of transition layers and of homogeneous layers. The solution is given in the form of a modification of the recurrence relation that was derived by Pekeris for homogeneous layers. 相似文献
18.
A theory for the bipole-dipole method of resistivity sounding is developed. Bipole-dipole apparent resistivities are related to Schlumberger apparent resistivities at two spacings. The theory can also be used to compute exact dipole-dipole apparent resistivity curves providing an improvement over the existing techniques which involve far field approximations. A comparison of bipole-dipole and dipole-dipole systems reveals the similarity between the two. However, the resolution of the bipole-dipole system depends on the azimuth angle. The flexibility of the theoretical expressions lead to a generalized field scheme independent of the bipolar or dipolar nature of the current source. 相似文献
19.
20.
C. H. STOYER 《Geophysical Prospecting》1990,38(1):87-99
Calculations of emf induced in a vertical axis coil by a current step in a straight wire segment of finite length were carried out using an equivalent dipole placed along the source wire. An approximation is valid for homogeneous and layered earth models. The location of the equivalent dipole is calculated by forcing the early- and late-time asymptotes of the transient sounding curve of the equivalent dipole to match those of the finite wire. This approximation works because the early-time asymptote of the emf depends on the component of the receiver position which is parallel to the wire while the late-time asymptote does not. Analytical integration of the early-time asymptote yields an expression for the equivalent dipole location in closed form. The coil can be placed anywhere in the vicinity of the finite wire. Square or rectangular loop sources can be simulated by one or more finite wire segments depending on the source-receiver geometry. The equivalent radius calculated for central loop soundings agrees well with the value derived using a circular loop with the same area as the square loop. Results show that acceptable sounding curves can be generated by the equivalent dipole for coils placed as close as 0.5 source lengths from the finite wire segment. Higher accuracy can be obtained by splitting the finite wire into two or more subsegments. Results for layered models are slightly better than homogeneous earth models when the resistivity increases with depth and slightly worse for models with resistivity decreasing with depth. Approximate calculations are about 10 times less expensive than exact calculations depending on the method used for the numerical integration. 相似文献