首都圈断层活动及地震关系探讨

In this paper, we made a systematic study on more than 40 years of observational data of ten temporary fault-crossing measurement sites in the capital circle region of China. We calculated horizontal and vertica1 components of fault slip, and horizontal extension or compression components. Considering the tectonic characteristics of the capital circle region and regional seismicity, we analyzed the present fault activity of the capital circle region and the relationship with earthquakes. The results show the complexity of fault activity in the region: the level of activity of all faults is low, most faults are left-lateral strike-slip faults; there is less vertical activity than horizontal activity and crustal movement is controlled by horizontal movement; fault activity and earthquake activity have a certain relationship, regional fault activity increases before an earthquake, and fault activity has certain abnormal features before strong earthquakes.     

Characteristics of Energy Accumulation and Release of Seismogenic Tectonics and Seismic Risk Analysis in Some Areas in the Tianshan Mountains, Xinjiang

Comparative analysis between the quantitative data of active faults and seismicity reveals that a complete earthquake recurrence cycle includes the characteristic earthquake and the submaxima earthquakes in-between. The magnitude of the sub-maxima events is correlated with the elapsed time of the characteristic earthquake and the slip rate of the fault. The fault displacement includes the major stick-slip generated by the characteristic earthquakes and the minor stick-slip by the sub-maxima ones. The magnitude-frequency relationship still works in the complete recurrence cycle. The energy accumulation in the cycle is divided approximately into four phases, and the seismicity differs at each phase. The relation of the maximum displacement with the average displacement of the characteristic earthquake suggests the partitioning of deformation between the characteristic and the sub-maxima earthquakes. Based on the above analysis, relevant mathematical equations are put forward for the quantitative assessment of the potential magnitude and earthquake risk of seismogenic tectonics. Tentative study has been carried out in this aspect in some areas of Tianshan.     

Research on the Characteristics of Deep and Shallow Structures in Shenyang City and Their Relationship with Seismic Activities

Deep and shallow tectonic data in Shenyang and its relationship with seismic activity shows that the NE trending faults developed on the surface control the formation and development of the fault-uplift and fault-depression.The uplift and depression of the bedrock at a depth of 7km underground are consistent with the surface structure.12 planar listric normal faults have developed above a depth of 18km ～ 20km and two deep faults have developed in the lower crust.Because of the deep incision and new activities,the surface Wanggangpu-Xinchengzi fault and Yongle-Qingshuitai fault,which correspond to the deep F3 fault and F6 fault,might be related to seismic activity in Shenyang.     

Seismotectonic Study on the West Part of the Interaction Zone Between Southern Tianshan and Northern Tarim

The interaction zone between southern Tianshan and northern Tarim is located at the northeast side of Pamir. It is a region with high seismicity. We constructed a seismotectonic model for the west part of this zone from geological profiles, deep crust seismic detection and earthquake focal mechanisms data. Based on the synthesized geological features, deep crust structure, and earthquake focal mechanisms, we think that the main regional tectonic feature is that the Tianshan tecto-lithostratigraphic unit overthrusts on the Tarim block. The Tianshan tectonic system includes the Maidan fault and thrust sheets in front of the fault; The Tarim tectonic system includes the underground northern Tarim margin fault, conjugate faults in basement and overthrust fault in shallow. The northern Tarim margin fault is a high angle fault deep in the Tarim crust, adjusting different trending deformation between Tianshan and Tarim. It is a major active fault that can generate large earthquakes. The other faults, such as the Tianshan overthrust system and the Tarim basement faults in this area may generate moderately strong earthquakes with different styles.     

新疆南部构造区带与地震活动状态研究

Based on the studies of earthquake activity, tectonic movement, crustal shortening rate, fault activity, local stress field and historical characteristics of strong earthquake activities in Xinjiang, we divide the south part of Xinjiang into 4 seismotectonic zones, namely, the eastern segment of south Tianshan seismic belt, the Kalpin block, the Kashi-Wuqia junction zone, and the west Kunlun Mountains seismic belt. Using earthquake catalogues from Xinjiang since 1900, and on the basis of integrity analysis of earthquake records in different magnitude ranges, the seismicity state of different seismotectonic zones is analyzed quantificationally by calculating the mean value of annual strain energy release, annual rate of earthquakes with different lower limits of magnitude, b-value, and the parameter m of accelerating strain release model. The characteristic indexes of seismicity state for each of the seismic tectonic zones are then determined, which provide a quantitative basis for earthquake tendency analysis and judgment.     

天津滨海地区浅层剪切波速与基底构造关系研究

Shear wave velocity is one of the important dynamic characteristics of soil layers and applied widely in aseismic engineering. In this paper, 500 drill logging data are used to make a linear interpolation based on 0.01°×0.01°×1m grid. A shallow 3-D shear wave velocity structure of Tianjin coastal area is obtained. According to the data and geological background, we selected two typical velocity profiles to try to introduce and explain its relationship to basement structure. The results show that the shear wave velocity structure clearly presents the characteristic of stratification and lateral inhomogeneity. Furthermore, the difference of the shear wave structure between tectonic elements is clear and the velocity structure between the two sides of the local or border fault in the Quaternary is disturbed or affected significantly. It intuitively shows that the basement structure and fault activity of this region had good control of sedimentation development and strata formation in the Quaternary period which would have an important effect on engineering seismic and geological condition evaluation.     

Shallow velocity structure and hidden faults of Kunming city region

In order to image the 3-D velocity structure of its shallow crust in Kunming region,China,finite-difference seis-mic tomography is used to invert the seismic data selected carefully from six-shot data. The result lays a founda-tion for the discussion of the relationship between the obtained velocity structure and the hidden faults,and for the illumination of the depth extents of main active faults surrounding Kunming city. Puduhe-Xishan fault lies on the western margin of the Kunming basin and is just situated on the west edge of the low velocity anomaly zone found at all depth levels. This indicates that this fault is a borderline fault of the Kunming basin. It can be concluded that the fault dips eastwards with a steep angle and its depth extent is large. Puji-Hanjiacun fault and Heilong-tan-Guandu fault play a role in controlling the low velocity anomaly zone in middle basin. The depth extents of the two faults are comparatively small,without traversing the interface of basin floor.     

Seismic Intensity Zoning Map of China (1990) and Its Explanation

The Seismic Intensity Zoning Map of China(1990)was based on the probabilistic method of seismic hazard analysis.In compiling the map,the characteristics of inhomogeneity of earthquake distribution both in space and time in China are considered sufficiently,and some necessary modifications in the model of seismic hazard analysis are carried out.Based on the analysis of the seismic activity and seismotectonic environment,26 seismic provinces are divided first as the statistical elements of the seismicity analysis; the seismic potential source areas are then divided in the seismic provinces.The 733 potential source areas with various upper limit magnitudes have been divided in the country.According to the reliable time domain of earthquake data with various magnitude intervals,the b values in magnitude-frequency relationship are calculated in the seismic provinces.According to the analysis of the inhomogeneity of seismicity distribution both in space and time,the annual average occurrence rates of the eart     

Analyzing the Relation Between Earthquakes and Active Faults Based on the Parameter Optimization Model

The gestation and occurrence of strong earthquakes are closely related to fault activity, which is not only revealed by abundant experimentation and seismism but also proved by modern seismology. On the Chinese mainland, the relation between earthquake activity and active faults is one of the bases for partitioning potential seismic sources, analyzing the seismotectonics and estimating location of strong earthquakes.Due to the nonuniformity of earth media, instability of observation systems and disturbance of the environment, etc, the variety of observational data is complicated, that is, there is no absolutely "normal" or "abnormal", and seismic anomalies can be divided into many mutually exclusive "abnormal states". In different conditions of combined time-space-strength, determining seismic anomalies by different monomial forecast methods and its efficiency could be different due to the uncertainty of a precursor itself or complexity of the relationship between a precursor and earthquake gestation. It is very difficult to discover and dispose of this difference in actual application in a "two-state" model. But in a "multi-state" model, the difference can be easily reflected and the optimal combination of forecasting parameters for a forecast method can also be determined easily.Based on the "multi-state" precursory model and the optimization method for parameters of earthquake forecast model under the condition of optimal forecast efficiency, the relationship of the spatial location of earthquake with M≥6.0 and active faults in three seismic belts are analyzed. The results demonstrate that in the Hetao Seismic Belt, seismicity is mostly concentrated in the range of 20 km along the fault, the optimization model can forecast the location of potential earthquakes of M≥6.0 near the faults with a relatively high accuracy and the reliability is 0.5; while in the Qilian Mt. Seismic Belt, the reliability only reaches 0.14 when we use the model to estimate earthquakes within 30 km range along the faults. The "multi-state" precursory model, the efficiency-evaluating model and the parameter selection of individual earthquake forecast model based on optimal efficiency are of certain revelatory and practicable meanings for developing knowledge about precursors, investigating the laws of earthquake preparation and searching for optimal forecasting methods.     

Tectonics and Seismicity of the Yarlung Tsangpo Grand Canyon Region

The Yarlung Tsangpo Grand Canyon region is located in the frontal zone of the eastern Himalayan syntaxis, where neo-tectonics and seismicity are intensive and closely related to each other. In the region, two sets of fault structures have developed, striking NNE-NE and NWW-NW, respectively. Investigation shows that they differ markedly in terms of scope, property, active times and intensity. The NWW-NW trending faults are large in size, and most are thrust and thrust strike-slip faults, formed in earlier times. The NEE-NE-strike faults are relatively small in size individually, with concentrated distribution, constituting the NNE-trending shear extensional fault zone, which is relatively younger with evident late Quaternary activities. Strong earthquakes occur mainly in the areas or zones of intensive differential movement of the Himalayas, e.g. along the deep and large fault zones around the crustal blocks. Most earthquakes of M≥7.0 are closely related to tectonics, where large-scale Holocene active faults are distributed with complicated fault geometry, or the faults of multiple directions intersect. Among them, earthquakes of M≥7.5 have occurred on the NW and NE-trending faults with a greater strike-slip component in the fault tectonic zones.     

断层活动协调比计算方法的改进及震例分析

According to the concept of the fault motion coordination ratio （FCR） , this paper discusses the effect of the starting point on the result of FCR calculation and puts forward the calculation method for FCR using the sliding window and the index for evaluating the dispersion. Earthquake cases analysis shows that at the Lijiang site across the fault： the FCR value varied greatly and its distribution was dispersive before the Ms7.0 Lijiang earthquake, while the value was stable and less dispersive after the earthquake, which reflects the strain accumulation of the fault during the seismogenic process and the poor movement coordination between the motion of the three components. After the earthquake, the fault was in a free activity state, the accumulated strain energy released, and the movement of the three components was coordinated mutually. At present, FCR dispersion of Lijiang is at a low value, and fault strain accumulation is at a low level.     

Failure time variation derived from R-S relation： the role of the static stress perturbation

In general, earthquake cycle related to earthquake faulting could include four major processes which could be described by(1) fault locking,(2) self-acceleration or nucleation(possible foreshocks),(3) coseismic slip, and(4) post-stress relaxation and afterslip. A sudden static stress change/perturbation in the surrounding crust can advance/ delay the fault instability or failure time and modify earthquake rates. Based on a simple one-dimensional spring-slider block model with the combination of rate-and-statedependent friction relation, in this study, we have approximately derived the simple analytical solutions of clock advance/delay of fault failures caused by a sudden static Coulomb stress change applied in the different temporal evolution periods during an earthquake faulting. The results have been used in the physics-based explanation of delayed characteristic earthquake in Parkfield region, California, in which the next characteristic earthquake of M 6.0 after 1966 occurred in 2004 instead of around 1988 according to its characteristic return period of 22 years. At the same time, the analytical solutions also indicate that the time advance/ delay in Coulomb stress change derived by the dislocation model has a certain limitation and fundamental flaw. Furthermore, we discussed the essential difference between rate- and state-variable constitutive(R–S) model and Coulomb stress model used commonly in current earthquake triggering study, and demonstrated that, in fact, the Coulomb stress model could be involved in the R–S model. The results, we have obtained in this study, could be used in the development of time-dependent fault interaction model and the probability calculation related to the time-dependent and renewal earthquake prediction model.     

Processes of the displacement field change of the 2009 April 6 M_W6.3 L’Aquila earthquake using persistent scatterer and small baseline methods

Using a time series method that combines both the persistent scatterer and small baseline approaches, we analyzed 9 scenes Envisat ASAR data over the L＇Aquila earthquake, and obtained a Shocke＇s displacement field and its evolution processes. The results show that： （1） Envisat ASAR clearly detected the whole processes of displacement field of the L＇Aquila earthquake, and distinct variations at different stages of the displacement field. （2） Preseismic creep displacement → displacement mutation when faulting → constantly slowed down after the earthquake. （3） The area of the strongest deformation and ground rupture was a low-lying oval depression region to the southeast. Surface faulting within a zone of about 22 km× 14 km, with an orientation of 135°, occurred along the NW-striking and SW-dipping Paganica-S. Demetrio normal fault. （4） In analyzing an area of about 54 km x 59 km, bounded by north-south axis to the epicenter, the displacement field has significant characteristics of a watershed： westward of the epicenter shows uplift with maximum of 130 mm in line-of-sight （LOS）, and east of the epicenter was a region with 220 mm of maximum subsidence in the LOS, concentrating on the rupture zone, the majority of which formed in the course of faulting and subsequence.     

Advances in research on earthquake fluids hydrogeology in China:a review

Monitoring of subsurface fluid （underground fluid） is an important part of efforts for earthquake prediction in China. The nationwide network, which monitors groundwater level, water temperature, and radon and mercury in groundwater, has been constructed in the last decades. Large amounts of abnormal fluid changes before and after major earthquakes have been recorded, providing precious data for research in earthquake sciences. Many studies have been done in earthquake fluid hydrogeology in order to probe the nature of the earthquake. Much progress in earthquake fluid hydrogeology has been made in the last decades. The paper provides a review of the advances in research on earthquake fluid hydrogeology over the last 40 years in China. It deals with the following five aspects： （1） an introduction to the development history of monitoring networks construction; （2） cases of different subsurface fluid changes recorded before some major earthquakes which occurred in the last decades; （3） characteristics of subsurface fluid changes following major earthquakes; （4） mechanism of subsurface fluid changes before and following earthquakes; （5） application of earthquake fluids in the hydrogeology field.     

斜入射平面SH波在层状半空间中沉积谷地周围的三维散射

The indirect boundary element method （IBEM） is used to study three-dimensional scattering of obliquely incident plane SH waves by an alluvial valley embedded in a layered half-space. The free-field response of the layered half-space is calculated by the direct stiffness method, and dynamic Green＇s functions of moving distributed loads acting on inclined lines in a layered half-space are calculated to simulate the scattering wave field. The presented method yields very accurate results since the three-dimensional dynamic stiffness matrix is exact and the moving distributed loads can act directly on the valley boundary without singularity. Numerical results and analyses are performed for amplification of obliquely incident plane SH waves around an alluvial valley in a uniform half-space and in single layer over half-space. The results show that the three-dimensional responses are distinctly different from the two-dimensional responses, and the displacement amplitudes around alluvial valleys in a uniform haft-space are obviously different from those in a layered half-space.     

新搜集到的《嘉陵江日报》关于叠溪地震的报道(根据原件电子扫描稿校对)

民国期间的《嘉陵江日报》对1933年发生在四川省茂县叠溪的地震进行过系列报道,其中根据地质学家常隆庆先生的信函对于该地震考察情况的报道尤为详尽。过去,这些资料从未被地震历史资料的文献收录,鲜为地震工作者所知,具有较高的史料价值。整理转载这6000余字的资料,并作了注释和说明,相信能够为今后的地震史料研究提供参考。     

北京白家疃台站重力非潮汐量变化及水储量影响的初步研究

The non-tidal variation gained from continuous gravity observations in stations usually reflects the regional continuous gravity changes. In this paper we focus on studying the non-tidal variation of Baijiatuan station, Beijing where there are two different gravimeters （namely, L＆R-804 and PET-031）. Based on the original raw tidal records of two gravimeters from 2008 to 2011, we first remove various interference from raw data by the standard procedure software-Tsoft; then we model the solid earth tides, ocean tidal loading and pole tide through related parameters; after that we adopt a new segmented polynomial fitting method based on Tsoft to fit the complex drift of spring gravimeter; and finally we calculate the atmospheric loading effects by a linear regression model. After a series of processing we gain the non-tidal variation of the two gravimeters at Baijiatuan site, Beijing. Furthermore, to analyze the non-tidal variation preliminarily, we study the main component of related tidal data by power spectral density. Comparing the non-tidal variation of two different gravimeters, we find seasonal fluctuations in non-tidal results, which are in accordance with the water storage change. Therefore, we take into account the relevance of gravity changes and water storage based on the gravity data of GRACE and water data of the CMAP model from 2003 to 2011 at different sites in the Chinese mainland （Beijing, Chengdu, Shenyang and Shiquanhe） , and make a preliminary analysis on the relationship between gravity changes and water storage.     

fmax and fault zone property of Lushan earthquake of 20 April 2013, Sichuan,China

In this study, we determined fnax from near- field accelerograms of the Lushan earthquake of April 20, 2013 through spectra analysis. The result shows that the values of fmax derived from five different seismography stations are very close though these stations roughly span about 100 km along the strike. This implies that the cause offmax is mainly the seismic source process rather than the site effect. Moreover, according to the source-cause model of Papageorgiou and Aki （Bull Seism Soc Am 73：693-722, 1983）, we infer that the cohesive zone width of the rupture of the Lushan earthquake is about 204 with an uncertainty of 13 m. We also find that there is a significant bulge between 30 and 45 Hz in the amplitude spectra of accel- erograms of stations 51YAL and 51QLY, and we confirm that it is due to seismic waves＇ reverberation of the sedi- mentary soil layer beneath these stations.     

Gravity change observed in a local gravity network and its implication to seasonal precipitation in Dali county,Yunnan province,China

This study investigates data-processing methods and examines the precipitation effect on gravity measurements at the Dali gravity network, established in 2005. High-quality gravity data were collected during four measurement campaigns. To use the gravity data validly, some geophysical corrections must be considered carefully. We first discuss data-processing methods using weighted leastsquares adjustment with the constraint of the absolute gravity datum. Results indicate that the gravity precision can be improved if all absolute gravity data are used as constraints and if calibration functions of relative gravimeters are modeled within the observation function. Using this data-processing scheme, the mean point gravity precision is better than 12 lgal. After determining the best data-processing scheme, we then process the gravity data obtained in the four measurement campaigns, and obtain gravity changes in three time periods. Results show that the gravity has a remarkable change of more than 50 lgal in the first time period from Apr–May of 2005 to Aug–Sept of 2007. To interpret the large gravity change, a mean water mass change(0.6 m in height) is assumed in the ETOPO1 topographic model. Calculations of the precipitation effect on gravity show that it can reach the same order of the observed gravity change. It is regarded as a main source of the remarkable gravity change in the Dali gravity network, suggesting that the precipitation effect on gravity measurements must be considered carefully.     

“霍山窗”地区现代构造应力场研究

The focal mechanisms of 62 moderate-small earthquakes since 1980 in the ＂ Huoshan seismic window＂ region are calculated with the method developed recently by Snoke, combining the use of the first motion of P, SV and SH waves with their amplitude ratios. Based on these abundant focal mechanisms, the mean tectonic stress field in the ＂Huoshan seismic window＂ region is inverted with the average stress tensor method, and the result shows that the ＂Huoshan seismic window＂ region is horizontally compressed in the near EW direction and horizontally dilated in the near NS direction, which is in accord with statistical results of focal mechanism parameters. We estimate the difference （also referred to as consistency parameter 0） between the force axis direction of the focal mechanism solution and the mean stress tensor, then further analyze the variation characteristics of 0 versus time, and the relationship with moderately strong earthquakes in the east China region. The result indicates that 0 in the ＂ Huoshan seismic window＂ region is in good correspondence with moderately strong earthquakes in the East China region. When 0 is lower than the mean value, corresponding moderately strong earthquakes may occur in the East China region.