A coarse grained turbidite system with morphotectonic control (Middle Albian, Ondarroa, northern Iberia)

The Middle Albian Ondarroa turbidite system is a coarse grained, deep water unit which outcrops in the north-eastern part of the Basque-Cantabrian region, west of the Pyrenees. It is about 18 km long and 7 km wide, and shows an unusual ‘L’shape resulting from both a direct morphotectonic confinement and the presence of nearby shallow water carbonate buildups. Eight main facies have been distinguished within this turbidite system: (1) clast-supported conglomerates; (2) mud-supported conglomerates; (3) slump deposits; (4) normally graded pebbly sandstones; (5) cross stratified sandstones; (6) interbedded graded sandstones and mudstones; (7) interbedded non-graded sandstones and mudstones: and (8) mudstones. Inner system, middle system, outer system and basin plain divisions have been distinguished. The inner turbidite system is characterized by stacked channel fill conglomerates and lesser sandy turbidites and mudstones. The middle system consists of sandy and conglomeratic fining upwards sequences, normally several metres thick. The outer system has alternating non-channellized sandstones and mudstones, without any predictable vertical arrangement. The basin plain is characterized by mudstone-siltstone laminations and lesser, randomly occurring thin bedded sandy turbidites. Three main channel fills make up the inner turbidite system. Although all of them can be compared with the valley channel fills of the modern Mississippi Fan, and thus their bases can be interpreted as sequence boundaries, only the lowermost and the uppermost channel bases are documented as allocyclic boundaries. The Ondarroa turbidite system was deposited in an immature passive margin subjected to transtensional movements. It filled a composite pull apart depression with coarse clastics derived from a narrow platform to the north of the present outcrops which was invaded by fan deltas. A major pattern of sinistral strike-slip faulting linked to the opening of the Bay of Biscay is invoked to explain the Ondarroa turbidite system appearance and its tectonic confinement.     

鄂尔多斯盆地西南部上三叠统长6油层组湖底扇特征

通过岩心观测、薄片观察和各种资料的综合分析，对鄂尔多斯盆地西南部上三叠统延长组长6油层组湖底扇的岩石类型、粒度特征、沉积构造等特征进行了详细研究。研究结果表明长6油层组浊积岩的岩石类型为长石岩屑砂岩、岩屑长石砂岩和长石砂岩；浊积砂岩的矿物成分成熟度低，结构成熟度较低，杂基含量高。粒度分析表明其具有典型的浊流特征。沉积构造可见递变粒序、底层面构造、滑塌角砾，且发育鲍马序列；反映了浊积岩具有明显的韵律性和旋回性。识别出薄层浊积岩、中层浊积岩、厚层浊积岩3种类型并分别描述其特征。在此基础上进行了亚相划分，详细描述了各亚相特征，确定了浊积岩分布在庆阳、合水、固城、安置农场地区。浊积岩的形成主要受外界的触发机制、充足的物源供给、古斜坡地形等因素控制。     

鄂尔多斯盆地西南部延长组长7段浊积岩沉积特征

根据野外露头、岩心观察及粒度分析,对鄂尔多斯盆地西南部延长组长7段浊积岩的沉积特征进行了研究。结果表明,浊积岩主要为岩屑长石砂岩,以次棱角状为主,成分成熟度及结构成熟度较低;粒度分布上具有典型的浊流沉积的特征,发育粒序层理、包卷层理、沟模、槽模、重荷模、滑塌变形等沉积构造;常见的鲍马序列层序组合有AB型、ABC型、ADE型、AE型。研究区浊积扇可分为上扇、中扇、下扇亚相及主沟道、辫状沟道等相应的沉积微相,上扇、中扇分布范围较广,是浊积扇的主体。在古地理演化过程中,长73浊积岩体规模较小,长72—长71湖侵作用减弱,深湖线收缩,浊积岩逐渐发育,在华池—庆城一带连片展布;湖盆地形、物源供给及构造运动是影响浊积岩发育及分布的重要原因。     

湖泊相浊积岩的主要特征及其地质意义

引言1855年,Forel首先在瑞士康士坦司湖和日内瓦湖中发现由悬浮物引起的高密度流。1939年,Johnson引入浊流的概念,随后,在许多天然湖泊和人工水库中,都观察到了与高密度流有关的沉积现象。不仅混浊河流可以引起高密度流,滑坡作用也是重要的触发机制(Lawson 1919;Daly 1936;Grover and Howard 1938;Johnson1939;Bell 1947;Gould 1953,1960).但是，自从五十年代经过Kuenen等人(1950)的研究，将巨厚复理石的成因与深海浊流联系起来以来，湖泊浊流沉积作用反而被忽视了。     

Lithologic transition and bed thickness periodicities in turbidite successions of the Antola Formation, Northern Apennines, Italy

The Antola Formation of Upper Cretaceous age crops out extensively in the Northern Apennines and consists of graded units of calcareous sandstones, sandstones, marlstones, and shales. It can be subdivided into the Cerreto, Antola Marlstone, Bruggi, and S. Donato Members on the basis of bed thicknesses and percentage of shales. Although the whole formation is interpreted as a deep-sea basin plain deposit, the members constitute lateral facies subdivisions which range from proximal, thick-bedded turbidities that show a prevalence of thinning upward cycles in bed thicknesses to distal turbidites that show predominantly thickening upward cycles and have a high percentage of shale. Repetitive patterns in the lithological sequence of the turbidite association are generally distinctive and are satisfactorily described as first order Markov chains. Only the Antola Marlstone Member has an additional second order Markov property. Imaginary eigenvalues of the transition probability matrices of all but the Bruggi Member demonstrate a strong cyclic character in the lithologic ordering within the formation. The behaviour of the Antola Marlstone and of the Bruggi may reflect the influence of a secondary ophiolitic intra-basinal source of clastics that contributed sandy turbidites and olistostromes. Systematic long-term variations in the sequence of bed thickness development in some sections of the Antola Formation are often subtle and equivocal, and pose special problems in interpretation. Fourier analysis was applied to the task of partitioning fundamental wavelengths from “background noise” introduced by essentially random depositional processes. In all members there is (1) strong short-term wavelength of two to three beds indicative of alternating thin and thick beds and judged to be typical of turbidite sequences; (2) an intermediate wavelength ranging from about five beds (proximal facies), eight beds (distal) to nine beds (very distal), which have both thinning and thickening upward trends, interpreted respectively as valley fill due to shifting talwegs of low density turbidity currents, and to progradational, flat turbidite lobes; (3) a poorly defined long-term wave-length of from thirty to greater than sixty beds that may be related to an unspecified trend in the evolution of the sedimentary basin. Phase angles associated with the coniputed power spectra give indications as to the asymmetry (thickening or thinning upward) or symmetry of the representative units.     

Anatomy of ancient passive margin slope systems: Aptian gravity-driven deposition on the Vocontian palaeomargin, western Alps, south-east France

The Aptian succession on the Vocontian palaeomargin (south-east France) consists of marl and marly calcareous pelagic slope facies together with a range of gravity-driven deposits (slumps, debris-flow deposits, turbidite packages and massive sandstones). The massive sandstones were emplaced by high-density turbidity currents and are associated with extensive clastic sills and dykes. The sedimentology is constrained by a high-resolution bio- and lithostratigraphic framework and permits a detailed analysis of the slope succession including: (1) a sequence stratigraphical analysis of the slope deposits; and (2) lateral tracing of individual sedimentary packages downslope. The resulting model for the Vocontian slope represents an alternative to the ‘classic’ Exxon delta-fed, mud-rich model. Key elements of the Vocontian model are: (1) an emphasis on lowstand slope erosion and complex slope morphology controlled by contemporary tectonism and salt diapirism; (2) slope deposition in confined erosional and structurally controlled conduits rather than the buildout of slope fans/channel-levee complexes; (3) a dominance of large-volume muddy slump and transitional debris-flow deposits, with subordinate sandy turbidites, including significant massive sandstone facies; (4) common sand injections (sills and dykes) associated with the massive sandstone facies; and (5) minimal downslope evolution of the flows, with the nature of the source sediment being the over-riding factor determining flow behaviour and deposit character. The Vocontian system is a rare instance in which large sections of a ‘fossil’ passive margin slope are preserved in the geological record. The slope deposits differ from the classic models of turbidite systems that have mainly been built from peripheral foreland basins, and the new insight makes it possible to compare ancient and present-day passive margin slope systems.     

Glacially-influenced deep-marine sedimentation of the Late Precambrian Gaskiers Formation, Newfoundland, Canada

The Late Proterozoic Conception Group, exposed on the Avalon Peninsula in Newfoundland, Canada, is a 4 km thick turbidite succession containing a conformable 300 m thick sequence of diamictites (the Gaskiers Formation) near the base. Massive and crudely-stratified diamictites form beds up to 25 m thick which have a tabular geometry with slightly erosive basal contacts and are interbedded with mudstones and fine-grained, thin-bedded turbidites. These diamictites are interpreted as submarine debris flow deposits. Disrupted diamictites form strongly deformed units that contain large, complexly folded rafts of mudstone and turbidite facies. These diamictite units are interpreted as submarine slumps. Diamictites contain glacially-striated and faceted clasts; clasts and matrix are predominantly of volcanic provenance. One outcrop shows interbedded volcanic agglomerate and diamictite, and volcanic bombs can also be identified. The interbedding of diamictites with turbidites and the stratigraphic context provided by the thick sequences of turbidites below (Mall Bay Formation) and above (Drook Formation) indicate a deep marine slope setting of diamictite deposition. Diamictite facies record remobilization and downslope transfer of large volumes of unstable volcanic and glacial debris initially deposited in a shallower water marginal marine zone. The regional tectonic framework suggests the Conception Group accumulated in a deep, southward-opening ensialic rift basin with active but waning volcanic centres to the north. The Gaskiers Formation may be representative of other Late Precambrian glacially-influenced diamictite sequences that were deposited around the North Atlantic region and in Europe. These deep marine diamictite sequences characterized by debris flows, turbidites, and slump deposits, can be contrasted with more extensive shallow marine shelf diamictite sequences found in association with dolomites and tidally influenced shallow water facies in other basinal settings.     

Sustained turbidity currents and their interaction with debrite-related topography; Labuan Island, offshore NW Borneo, Malaysia

The Temburong Fm (Early Miocene), Labuan Island, offshore NW Borneo, was deposited in a lower-slope to proximal basin-floor setting, and provides an opportunity to study the deposits of sustained turbidity currents and their interaction with debrite-related topography. Two main gravity-flow facies are identified; (i) slump-derived debris-flow deposits (debrites) — characterised by ungraded silty mudstones in beds 1.5 to > 60 m thick which are rich in large (> 5 m) lithic clasts; and (ii) turbidity current deposits (turbidites) — characterised by medium-grained sandstone in beds up to 2 m thick, which contain structureless (T_a) intervals alternating with planar-parallel (T_b) and current-ripple (T_c) laminated intervals. Laterally discontinuous, cobble-mantled scours are also locally developed within turbidite beds. Based on these characteristics, these sandstones are interpreted to have been deposited by sustained turbidity currents. The cobble-mantled scours indicate either periods of intense turbidity current waxing or individual flow events. The sustained turbidity currents are interpreted to have been derived from retrogressive collapse of sand-rich mouth bars (breaching) or directly from river effluent (hyperpycnal flow). Analysis of the stratal architecture of the two facies indicates that routing of the turbidity currents was influenced by topographic relief developed at the top of the underlying debrite. In addition, turbidite beds are locally eroded at the base of an overlying debrite, possibly due to clast-related substrate ‘ploughing’ during the latter flow event. This study highlights the difficulty in constraining the origin of sustained turbidity currents in ancient sedimentary sequences. In addition, this study documents the importance large debrites may have in generating topography on submarine slopes and influencing routing of subsequent turbidity currents and the geometry of their associated deposits.     

辽河盆地大凌河油层湖底扇沉积特征

辽河盆地位于辽宁省南部,渤海湾盆地东北角,是继中生代发育起来的第三纪断陷盆地。分东部凹陷,西部凹陷和大民屯凹陷等二级构造单元(图1)。     

Glaciation and deglaciation of the Libyan Desert: The Late Ordovician record

Detailed outcrop studies at the flanks of Al Kufrah Basin, Libya, reveal the nature of glacially-related sedimentation and post-depositional deformation styles produced in association with the Late Ordovician glaciation, during which ice sheets expanded northward over North Africa to deposit the Mamuniyat Formation. At the SE basin flank (Jabal Azbah), the Mamuniyat Formation is sand-dominated, and incises interfingering braidplain and shallow marine deposits of the Hawaz Formation. The glacially-related sediments include intercalations of mud-chip bearing tabular sandstones and intraformational conglomerates, which are interpreted as turbidite and debrite facies respectively. These record aggradation of an extensive sediment wedge in front of a stable former ice margin. An increase in mudstone content northward is accompanied by the occurrence of more evolved turbidites. A widespread surface, bearing streamlined NW–SE striking ridges and grooves, punctuates this succession. The structures on the surface are interpreted to have formed during a regional north-westward ice advance. Above, siltstones bearing Arthrophycus burrows, and Orthocone-bearing sandstones beneath tidal bars testify to glaciomarine conditions for deposition of the underflow deposits beneath. By contrast, the northern basin margin (Jabal az-Zalmah) is appreciably different in recording shallower water/paralic sedimentation styles and major glaciotectonic deformation features, although facies analysis also reveals northward deepening. Here, a siltstone wedging from 8 to 50 m toward the north was deposited (lower delta plain), succeeded by climbing ripple cross-laminated sandstones up to 60 m in thickness (distal through proximal delta mouth bar deposits) with occasional diamictite interbeds. These rocks are deformed by thrusts and > 50 m amplitude fault-propagation folds, the deformation locally sealed by a diamictite then overlain by conglomeratic lag during ultimate deglaciation. Integrating observations from both basin margins, a model of fluvial-dominated delta systems feeding a pulsed debrite and turbidite fan system in a shallow proglacial shelf is proposed.     

Distinctive erosional and depositional structures formed at a canyon mouth: A lower Pleistocene deep‐water succession in the Kazusa forearc basin on the Boso Peninsula,Japan

The canyon mouth is an important component of submarine‐fan systems and is thought to play a significant role in the transformation of turbidity currents. However, the depositional and erosional structures that characterize canyon mouths have received less attention than other components of submarine‐fan systems. This study investigates the facies organization and geometry of turbidites that are interpreted to have developed at a canyon mouth in the early Pleistocene Kazusa forearc basin on the Boso Peninsula, Japan. The canyon‐mouth deposits have the following distinctive features: (i) The turbidite succession is thinner than both the canyon‐fill and submarine‐fan successions and is represented by amalgamation of sandstones and pebbly sandstones as a result of bypassing of turbidity currents. (ii) Sandstone beds and bedsets show an overall lenticular geometry and are commonly overlain by mud drapes, which are massive and contain fewer bioturbation structures than do the hemipelagic muddy deposits. (iii) The mud drapes have a microstructure characterized by aggregates of clay particles, which show features similar to those of fluid‐mud deposits, and are interpreted to represent deposition from fluid mud developed from turbidity current clouds. (iv) Large‐scale erosional surfaces are infilled with thick‐bedded to very thick‐bedded turbidites, which show lithofacies quite similar to those of the surrounding deposits, and are considered to be equivalent to scours. (v) Concave‐up erosional surfaces, some of which face in the upslope direction, are overlain by backset bedding, which is associated with many mud clasts. (vi) Tractional structures, some of which are equivalent to coarse‐grained sediment waves, were also developed, and were overlain locally by mud drapes, in association with mud drape‐filled scours, cut and fill structures and backset bedding. The combination of these outcrop‐scale erosional and depositional structures, together with the microstructure of the mud drapes, can be used to identify canyon‐mouth deposits in ancient deep‐water successions.     

Origin of fine-grained carbonate and siliciclastic sediments in an Early Palaeozoic slope sequence, Cow Head Group, western Newfoundland

The Cow Head Group is an Early Palaeozoic base-of-slope sediment apron composed of carbonate and shale. Whereas coarse-grained conglomerate and calcarenite are readily interpreted as debris-flow and turbidite deposits, calcilutite (lime mudstone), calcisiltite, and shale combine to form three distinct lithofacies whose present attributes are a function of both sedimentation and early diagenesis. Shale is the most common lithology. Black, green, and red shale colour variations reflect the abundance of organic matter in the source area and oxygenation conditions of the sea bottom. In black and green shale, millimetre- to centimetre-thick, alternating dark and light laminations represent terrigenous mud turbidites and hemipelagites, respectively. The calcisiltite/shale facies is uncommon and is composed of numerous graded carbonate-shale sequences (GCSS) deposited from waning carbonate turbidites and fall-out of terrigenous muds. Some of the characteristics of ribbon and parted lime mudstones in the calcilutite/shale facies can be explained by deposition of carbonate mud from dilute turbidity currents or hemipelagic settling. Other features are diagenetic in origin. The lack of micrite in GCSS and in the interbedded shales of the calcilutite/shale facies is interpreted to reflect early dissolution of the finer carbonate from these sediments. This remobilized carbonate was precipitated locally to: lithify lime mudstone turbidites or hemipelagites; form diagenetic lime mudstone beds and nodules; cement calcisiltites; and form dolomite. Many of the calcisiltites and calcilutites were, therefore, carbonate enriched at the expense of adjacent argillaceous sediments. These attributes characterize not only fine-grained sediments of the Cow Head Group but many other Early Palaeozoic slope carbonates as well, suggesting that the model proposed here for depositionl diagenesis has wider application.     

Facies and facies association of the siliciclastic Brak River and carbonate Gemsbok formations in the Lower Ugab River valley,Namibia, W. Africa

The Neoproterozoic Zerrissene Turbidite Complex of central-western Namibia comprises five turbiditic units. From the base to the top they are the Zebrapüts Formation (greywacke and pelite), Brandberg West Formation (marble and pelite), Brak River Formation (greywacke and pelite with dropstones), Gemsbok River Formation (marble and pelite) and Amis River Formation (greywacke and pelites with rare carbonates and quartz-wacke).In the Lower Ugab River valley, five siliciclastic facies were recognised in the Brak River Formation. These are massive and laminated sandstones, classical turbidites (thick- and thin-bedded), mudrock, rare conglomerate and breccia. For the carbonate Gemsbok River Formation four facies were identified including massive non-graded and graded calcarenite, fine grained evenly bedded blue marble and calcareous mudrock. Most of these facies are also present in the other siliciclastic units of the Zerrissene Turbidite Complex as observed in other areas.The vertical facies association of the siliciclastic Brak River Formation is interpreted as representing sheet sand lobe to lobe-fringe palaeoenvironment with the abandonment of siliciclastic deposition at the top of the succession. The vertical facies association of the carbonate Gemsbok Formation is interpreted as the slope apron succession overlain by periplatform facies, suggesting a carbonate slope sedimentation of a prograding depositional shelf margin.If the siliciclastic–carbonate paired succession would represent a lowstand relative sea-level and highstand relative sea-level, respectively, the entire turbidite succession of the Zerrissene Turbidite Complex can be interpreted as three depositional sequences including two paired siliciclastic–carbonate units (Zebrapüts-Brandberg West formations; Brak River–Gemsbok formations) and an incomplete succession without carbonate at the top (Amis River Formation).     

鄂尔多斯盆地黄陵地区上三叠统延长组长7、长6油层组浊积岩沉积特征及地质意义*

利用岩心观察、薄片鉴定和粒度分析等方法,对鄂尔多斯盆地黄陵地区上三叠统延长组长7、长6油层组浊积岩沉积特征与油气地质意义进行了研究。研究结果表明,浊积岩主要为长石砂岩,以棱角状—次棱角状为主,粒度具有典型的浊流沉积特征。沉积构造可见泥底构造、同生变形构造、粒序递变层、鲍玛序列等。最常见的鲍玛序列有ABC型、AB型、ADE型、AE型、CDE型和A段叠置型,具备浊积岩的典型特点。识别出薄层浊积岩和中厚层浊积岩,其属于三角洲前缘滑塌成因,可分为中心微相和边缘微相。浊流砂体是半深湖—深湖区发育的良好储集体,其分布区可作为重要的油气勘探区。     

闽西南地区早三叠世溪口组浊流沉积

闽西南地区的早三叠世溪口组主要由深水浊流沉积组成，可以识别出５个相类型:砾岩相、砂岩相、砂岩－泥岩相、粉砂岩－泥岩相、具粒序的粉砂质泥岩相。它们可组成５个相组合，分别形成于浊积扇的上扇、中扇和下扇环境。相组合的空间展布、古水流以及遗迹化石的分布均一致表明，当时的大陆坡倾向南东。砂岩的地球化学成分反映其构造背景为被动大陆边缘.     

济阳坳陷牛庄洼陷沙三段三角洲前缘浊积岩特征

根据地质、测井、地震资料的综合分析,对济阳坳陷牛庄洼陷沙河街组三段三角洲前缘的浊积岩特征进行了研究。结果表明,该区存在砂质浊积岩体和细粒浊积岩体两种浊流沉积物。其中砂质浊积岩体粒度较细、结构成熟度和成分成熟度较低,结构和构造均反映了砂体具有滑塌再沉积的特点,可用Bouma序列来描述,常发育CDE,BCD,ABCD型浊流组合。砂质浊积岩体可进一步划为有根式和无根式两类。有根式砂体常呈扇形,可分为内扇槽道、中扇辫状水道、水道间、水道前缘和外扇无水道五种微相;无根式砂体常呈片状、舌状,可分为中心微相和边缘微相两个相带。细粒浊积岩属于低密度流的产物,不能用Bouma序列来解释,主要发育递变纹层泥岩和不均匀的块状泥岩两种细粒浊积岩。根据两类沉积物的沉积特征,建立了该区三角洲一浊积岩体综合沉积模式。论述了三角洲前缘浊积岩的成因及石油地质意义。     

贺兰奥拉槽早古生代深水重力流体系的沉积特征和充填样式

位于鄂尔多斯西缘的贺兰构造带为一中元古代一古生代的奥拉槽。在区内的中寒武和中奥陶统中识别了一套巨厚的深水重力流沉积,其中包括下斜坡滑塌泥石流复合体、浊积扇以及碳酸盐岩斜坡扇裙等沉积类型。主要的相单元包括充填沟道或进入扇面形成的泥石流钙质角砾岩和砾岩、充填辫状水道的多层叠置的砂岩和砂砾岩、上叠扇的砂、泥岩互层以及浊积砂屑或含砾砂屑灰岩等。在中奥陶世该奥拉槽发展成一深水一半深水海槽,沿盆地西侧发育有浊积扇,而东侧仅有碳酸盐岩滑塌扇裙。它们可能是沿深水盆地两侧深大断裂产生的陡坡或水下断崖分布的,代表了早古生代贺兰奥拉槽在强烈沉陷期特定的深水盆地充填。     

Turbiditic and non-turbiditic mudstone of Cretaceous flysch sections of the East Alps and other basins

Recognition of the occurrence and extent of hemipelagic and pelagic deposits in turbidite sequences is of considerable importance for environmental analysis (palaeodepth, circulation, distance from land, hemipelagic or pelagic versus turbidite sedimentation rates) of ancient basins. Differentiation between the finegrained parts (E-division) of turbidites and the (hemi-) pelagic layers (F-division of turbidite-pelagite alternations) is facilitated in basins where carbonate turbidites were deposited below the carbonate compensation depth (CCD) such as the Flysch Zone of the East Alps but may be difficult in other basins where less compositional contrast is developed between the fine-grained turbidites and hemipelagites. This difficulty pertains particularly in Palaeozoic and older basins. For Late Mesozoic-Cenozoic oceans with a relatively deep calcite compensation level three other types of turbidite basins may be distinguished for which differentiation becomes increasingly more difficult in the sequence from (1) to (3): (1) terrigenous turbidite basins above the CCD; (2) carbonate turbidite basins above the CCD; (3) terrigenous turbidite basins below the CCD. Criteria and methods useful for the differentiation between turbiditic and hemipelagic mudstone in the Upper Cretaceous of the Flysch Zone of the East Alps include calcium carbonate content, colour, sequential analysis, distribution of bioturbation, and microfaunal content. In modern turbidite basins clay mineral content, organic matter content, plant fragments, and grain-size (graded bedding, maximum grain diameter) have reportedly also been used as criteria (see Table 3). Deposition of muddy sediment by turbidity currents on weakly sloping sea bottoms such as the distal parts of deep-sea fans or abyssal plains is not only feasible but may lead to the accumulation of thick layers. Contrary to earlier speculation it can be explained by the hydrodynamic theory of turbidity currents, if temperature differences between the turbidity current and the ambient deep water as well as relatively high current velocities for the deposition of turbiditic muds (an order of magnitude higher on mud surfaces than commonly assumed) are taken into consideration. The former add to the capacity of turbidity currents to carry muddy sediment without creating a driving force on a low slope.     

广西来宾-合山一带晚二叠世海底扇浊积岩相

广西来宾蓬莱滩及合山马滩两地的晚二叠世地层中发育有典型的重力流沉积构造,如粒序层理、包卷层理、槽模、重荷模、碟状构造和滑塌褶皱等。通过对蓬莱滩合山组和大隆组以及马滩剖面的大隆组岩相特征的详细研究,提出来宾蓬莱滩晚二叠世合山组和大隆组以及合山马滩晚二叠世大隆组形成于海底扇环境,划分出具碟状构造的块状砂岩(B１)、块状砂岩(B2)、近基浊积岩(C)、远基浊积岩(D)、不规则互层的砂泥岩(E)、滑塌褶皱层(F)及含浮游生物化石的页岩、硅质岩(G)等岩相类型,同时归纳出外扇相组合、中扇舌状体相组合、中扇水道相组合、斜坡相组合及深切谷水道相组合等,还对这些海底扇浊积岩系的古地理意义做了讨论。桂中碳酸盐岩台地相区和云开古陆之间在晚二叠世为一发育海底扇浊积岩的深水盆地,其中来宾-合山一带在大隆组沉积期处于水深约300～1 000 m的深水盆地环境,合山一带火山活动提供的火山物质及来自东侧云开古陆的陆源物质构成该区浊积岩的主要物源。