Geomorphic evidence of ancient catastrophic flow type landslides in the mid-mountain ridges of the Western Flysch Carpathian Mountains （Czech Republic）

Ancient flow type landslides are relatively frequent fossil forms of the relief in mid-mountain conditions of the Czech Carpathian Mountains. Sixty rather distinctive displays of debris flows, rock avalanches, and debris avalanches have been mapped in the uppermost part of the territory. Unlike contemporary sporadic and low volume debris flows, ancient （Pleistocene and Lower Holocene） accumulations are a few orders of magnitude more extensive and were of considerable geomorphologic significance in forming the steep sections of mountain valleys and slopes. This geomorphic pattern does not hold for flow type slides, the source of which is material released as a consequence of numerous deep-seated landslides. Due to deep disruption of slopes, a few high-magnitude flow type landslides （e.g., rock avalanches）, quite rare in flysch mid-mountain conditions, also occurred in the Late Holocene.     

Slope dynamics of Lake Albano (Rome,Italy): insights from high resolution bathymetry

New detailed data about the morphology of the submerged slopes of Lake Albano (Rome, Italy) have been collected by a sonar multibeam survey financed by the Italian Department of Civil Protection. These data allow for investigation of the subaqueous slope dynamics of the lake, which partially fills a volcanic depression, and the elucidation of the relationships between subaqueous and subaerial slope processes. Subaerial, submerged and combined subaerial/submerged landslide‐related morphologies were detected around the inner slopes of the lake. In the submerged slopes, several gravity‐induced landforms were recognized: landslide scar areas, landslide accumulations, erosional chutes and channels, block fields, isolated blocks, scarps and slope breaks. An attempt to evaluate the state of activity of the submerged slopes was carried out by taking into consideration the relative freshness of some selected landforms. Interpretation of bathymetric data, as well as direct surveys of the subaerial slopes, was used to assess the morphometric features and interpret the type of movement of the landslides. We propose a comprehensive classification based on the landslide's size and type of movement. We recognized rock fall/topples, debris flows, rock slides and slump, complex rock slides/channelled flows and debris slide and slump. The volume of the main landslides ranged between 10¹ and 10³ m³, while a few rock and debris slides have volumes ranging between 10³ and 10⁵ m³. Two large palaeo‐landslides with volumes on the order of 10⁶ m³ were identified in the southern and northern part of the lake, respectively. Velocities of the recognized landslides range from rapid to extremely rapid. Two main landslide hazard scenarios have been depicted from the results of the integrated analysis of both subaerial and submerged gravity‐induced landforms. The most hazardous scenario involves extremely rapid large volume events (>10⁶ m³) that could, if they interacted with water, induce catastrophic tsunamis. Copyright © 2009 John Wiley & Sons, Ltd.     

A PANORAMA OF LANDSLIDES TRIGGERED BY THE 8 AUGUST 2017 JIUZHAIGOU,SICHUAN MS7.0 EARTHQUAKE

The M_S7.0 Jiuzhaigou earthquake in Sichuan Province of 8 August 2017 triggered a large number of landslides. A comprehensive and objective panorama of these landslides is of great significance for understanding the mechanism, intensity, spatial pattern and law of these coseismic landslides, recovery and reconstruction of earthquake affected area, as well as prevention and mitigation of landslide hazard. In this paper, we use the trinity method of space, sky and earth to create a panorama of the landslides triggered by this event. There are 4 roads in the distribution area of the coseismic landslides. The Jinglinghai-Xiamo and Jiudaoguai-Jiuzhaitiantang road sections register the most serious coseismic landslides. The landslides are mainly of moderate-and small-scales, and also with a few large landslides and avalanches. A detailed visual interpretation of the coseismic landslides is performed in two areas of Wuhuahai(11.84km²) and Zharusi-Shangsizhai village(47.07km²), respectively. The results show the overall intensity of landsliding(1088 landslides, a total area 1.514km²) in the Wuhuahai area is much higher than those in the Zharusi-Shangsizhai village area(528 landslides, a total area 0.415km²). On the basis of a scene of post-earthquake Geoeye -1 satellite images, we delineate more than 4 800 coseismic landslides with a total occupation area 9.6km². The spatial pattern of these landslides is well related with the locations of the inferred seismogenic fault and aftershocks. Widely distributed earthquake-affected weakened slopes, residual loose materials staying at high-position slopes and in valleys have greater possibilities to fail again and generate new landslides or debris flows under the conditions of strong aftershocks or heavy rainfalls in the future. Geological hazard from these events will become one of the most serious problems in the recovery and reconstruction of the earthquake-affected area which should receive much attention.     

Debris avalanches and debris flows transformed from collapses in the Trans-Mexican Volcanic Belt, Mexico – behavior, and implications for hazard assessment

Volcanoes of the Trans-Mexican Volcanic Belt (TMVB) have yielded numerous sector and flank collapses during Pleistocene and Holocene times. Sector collapses associated with magmatic activity have yielded debris avalanches with generally limited runout extent (e.g. Popocatépetl, Jocotitlán, and Colima volcanoes). In contrast, flank collapses (smaller failures not involving the volcano summit), both associated and unassociated with magmatic activity and correlating with intense hydrothermal alteration in ice-capped volcanoes, commonly have yielded highly mobile cohesive debris flows (e.g. Pico de Orizaba and Nevado de Toluca volcanoes). Collapse orientation in the TMVB is preferentially to the south and northeast, probably reflecting the tectonic regime of active E–W and NNW faults. The differing mobilities of the flows transformed from collapses have important implications for hazard assessment. Both sector and flank collapse can yield highly mobile debris flows, but this transformation is more common in the cases of the smaller failures. High mobility is related to factors such as water content and clay content of the failed material, the paleotopography, and the extent of entrainment of sediment during flow (bulking). The ratio of fall height to runout distance commonly used for hazard zonation of debris avalanches is not valid for debris flows, which are more effectively modeled with the relation inundated area to failure or flow volume coupled with the topography of the inundated area.     

Volcanic hazards from Bezymianny- and Bandai-type eruptions

Major slope failures are a significant degradational process at volcanoes. Slope failures and associated explosive eruptions have resulted in more than 20 000 fatalities in the past 400 years; the historic record provides evidence for at least six of these events in the past century. Several historic debris avalanches exceed 1 km³ in volume. Holocene avalanches an order of magnitude larger have traveled 50–100 km from the source volcano and affected areas of 500–1500 km². Historic eruptions associated with major slope failures include those with a magmatic component (Bezymianny type) and those solely phreatic (Bandai type). The associated gravitational failures remove major segments of the volcanoes, creating massive horseshoe-shaped depressions commonly of caldera size. The paroxysmal phase of a Bezymianny-type eruption may include powerful lateral explosions and pumiceous pyroclastic flows; it is often followed by construction of lava dome or pyroclastic cone in the new crater. Bandai-type eruptions begin and end with the paroxysmal phase, during which slope failure removes a portion of the edifice. Massive volcanic landslides can also occur without related explosive eruptions, as at the Unzen volcano in 1792.The main potential hazards from these events derive from lateral blasts, the debris avalanche itself, and avalanche-induced tsunamis. Lateral blasts produced by sudden decompression of hydrothermal and/or magmatic systems can devastate areas in excess of 500km² at velocities exceeding 100 m s^–1. The ratio of area covered to distance traveled for the Mount St. Helens and Bezymianny lateral blasts exceeds that of many pyroclastic flows or surges of comparable volume. The potential for large-scale lateral blasts is likely related to the location of magma at the time of slope failure and appears highest when magma has intruded into the upper edifice, as at Mount St. Helens and Bezymianny.Debris avalanches can move faster than 100 ms^–1 and travel tens of kilometers. When not confined by valley walls, avalanches can affect wide areas beyond the volcano's flanks. Tsunamis from debris avalanches at coastal volcanoes have caused more fatalities than have the landslides themselves or associated eruptions. The probable travel distance (L) of avalanches can be estimated by considering the potential vertical drop (H). Data from a catalog of around 200 debris avalanches indicates that the H/L rations for avalanches with volumes of 0.1–1 km³ average 0.13 and range 0.09–0.18; for avalanches exceeding 1 km³, H/L ratios average 0.09 and range 0.5–0.13.Large-scale deformation of the volcanic edefice and intense local seismicity precede many slope failures and can indicate the likely failure direction and orientation of potential lateral blasts. The nature and duration of precursory activity vary widely, and the timing of slope faliure greatly affects the type of associated eruption. Bandai-type eruptions are particularly difficult to anticipate because they typically climax suddenly without precursory eruptions and may be preceded by only short periods of seismicity.     

Large debris avalanches and associated eruptions in the Holocene eruptive history of Shiveluch Volcano, Kamchatka, Russia

 Shiveluch Volcano, located in the Central Kamchatka Depression, has experienced multiple flank failures during its lifetime, most recently in 1964. The overlapping deposits of at least 13 large Holocene debris avalanches cover an area of approximately 200 km² of the southern sector of the volcano. Deposits of two debris avalanches associated with flank extrusive domes are, in addition, located on its western slope. The maximum travel distance of individual Holocene avalanches exceeds 20 km, and their volumes reach ∼3 km³. The deposits of most avalanches typically have a hummocky surface, are poorly sorted and graded, and contain angular heterogeneous rock fragments of various sizes surrounded by coarse to fine matrix. The deposits differ in color, indicating different sources on the edifice. Tephrochronological and radiocarbon dating of the avalanches shows that the first large Holocene avalanches were emplaced approximately 4530–4350 BC. From ∼2490 BC at least 13 avalanches occurred after intervals of 30–900 years. Six large avalanches were emplaced between 120 and 970 AD, with recurrence intervals of 30–340 years. All the debris avalanches were followed by eruptions that produced various types of pyroclastic deposits. Features of some surge deposits suggest that they might have originated as a result of directed blasts triggered by rockslides. Most avalanche deposits are composed of fresh andesitic rocks of extrusive domes, so the avalanches might have resulted from the high magma supply rate and the repetitive formation of the domes. No trace of the 1854 summit failure mentioned in historical records has been found beyond 8 km from the crater; perhaps witnesses exaggerated or misinterpreted the events. Received: 18 August 1997 / Accepted: 19 December 1997     

Basaltic pyroclastic flows of Fuji volcano, Japan: characteristics of the deposits and their origin

Fuji volcano is the largest active volcano in Japan, and consists of Ko-Fuji and Shin-Fuji volcanoes. Although basaltic in composition, small-volume pyroclastic flows have been repeatedly generated during the Younger stage of Shin-Fuji volcano. Deposits of those pyroclastic flows have been identified along multiple drainage valleys on the western flanks between 1,300 and 2,000 m a.s.l., and have been stratigraphically divided into the Shin-Fuji Younger pyroclastic flows (SYP) 1 to 4. Downstream debris flow deposits are found which contain abundant material derived from the pyroclastic flow deposits. The new¹⁴C ages for SYP1 to SYP4 are 3.2, 3.0, 2.9, and 2.5 ka, respectively, and correspond to a period where explosive summit eruptions generated many scoria fall deposits mostly toward the east. The SYP1 to SYP4 deposits consist of two facies: the massive facies is about 2 m thick and contains basaltic bombs of less than 50 cm in size, scoria lapilli, and fresh lithic basalt fragments supported in an ash matrix; the surge facies is represented by beds 1 to 15 cm thick, consisting mainly of ash with minor amount of fine lapilli. The bombs and scoria are 15 to 30% in volume within the massive facies. The ashes within the SYP deposits consist largely of comminuted basalt lithics and crystals that are derived from the Middle-stage lava flows exposed at the western flanks. SYP1 to SYP4 were only dispersed down the western flanks. The reason for this one-sided distribution is the asymmetric topography of the edifice; the western slopes of the volcano are the steepest (over 34 degrees). Most pyroclastic materials cannot rest stably on the slopes steeper than 33 degrees. Therefore, ejecta from the explosive summit eruptions that fell on the steep slopes tumbled down the slopes and were remobilized as high-temperature granular flows. These flows consisted of large pyroclastics and moved as granular avalanches along the valley bottom. Furthermore, the avalanching flows increased in volume by abrasion from the edifice and generated abundant ashes by the collision of clasts. The large amount of the fine material was presumably available within the transport system as the basal avalanches propagated below the angle of repose. Taking the typical kinetic friction coefficient of small pyroclastic flows, such flows could descend the western flanks where scattered houses are below 1,000 m a.s.l. A similar type of pyroclastic flow could result if explosive summit eruptions occur in the future.Editorial responsibility: R Cioni     

Pyroclastic flows from the 1991 eruption of Unzen volcano,Japan

Pyroclastic flows from Unzen were generated by gravitational collapse of the growing lava dome. As soon as the parental lobe failed at the edge of the dome, spontaneous shattering of lava occurred and induced a gravity flow of blocks and finer debris. The flows had a overhanging, tongue-like head and cone- or rollershaped vortices expanding outward and upward. Most of the flows traveled from 1 to 3 km, but some flows reached more than 4 km, burning houses and killing people in the evacuated zone of Kita-kamikoba on the eastern foot of the volcano. The velocities of the flows ranged from 15 to 25 m/s on the gentle middle flank. Observations of the flows and their deposits suggest that they consisted of a dense basal avalanche and an overlying turbulent ash cloud. The basal avalanche swept down a topographic low and formed to tongue-like lobe having well-defined levees; it is presumed to have moved as a non-Newtonian fluid. The measured velocities and runout distances of the flows can be matched to a Bingham model for the basal avalanche by the addition of turbulent resistance. The rheologic model parameters for the 29 May flow are as follows: the density is 1300 kg/m³, the yield strength is 850 Pa, the viscosity is 90 Pa s, and the thickness of the avalanche is 2 m. The ash cloud is interpreted as a turbulent mixing layer above the basal avalanche. The buoyant portions of the cloud produced ash-fall deposits, whereas the dense portions moved as a surge separated from the parental avalanche. The ash-cloud surges formed a wide devastated zone covered by very thin debris. The initial velocities of the 3 June surges, when they detached from avalanches, are determined by the runout distance and the angle of the energy-line slope. A comparison between the estimated velocities of the 3 June avalanches and the surges indicates that the surges that extended steep slopes along the avalanche path, detached directly from the turbulent heads of the avalanches. The over-running surge that reached Kita-Kamikoba had an estimated velocity higher than that of the avalanche; this farther-travelled surge is presumed to have been generated by collapse of a rising ash-cloud plume.     

The role of the sediment budget in understanding debris flow susceptibility

This study proposes a sediment‐budget model to predict the temporal variation of debris volume stored in a debris‐flow prone watershed. The sediment‐budget is dominated by shallow landslides and debris outflow. The basin topography and the debris volume stored in the source area of the debris‐flow prone watershed help evaluating its debris‐flow susceptibility. The susceptibility model is applied to the Tungshih area of central western Taiwan. The importance of the debris volume in predicting debris‐flow susceptibility is reflected in the standardized coefficients of the proposed statistical discriminant model. The high prediction rate (0·874) for the occurrence of debris flows justifies the capability of the proposed susceptibility models to predict the occurrence of debris flows. This model is then used to evaluate the temporal evolution of the debris‐flow susceptibility index. The analysis results show that the numbers of watershed which are classified as a debris‐flow group correspond well to storage of sediment at different time periods. These numbers are 10 before the occurrence of Chi‐Chi earthquake, 13 after the occurrence of Chi‐Chi earthquake, 16 after the occurrence of landslides induced by Typhoon Mindulle (Typhoon M), and 14 after the occurrence of debris flows induced by Typhoon M. It indicates that the occurrence of 7·6 Chi‐Chi earthquake had significant impact on the debris flow occurrence during subsequent typhoons. Copyright © 2009 John Wiley & Sons, Ltd.     

Volcaniclastic debris-flow occurrences in the Campania region (Southern Italy) and their relation to Holocene–Late Pleistocene pyroclastic fall deposits: implications for large-scale hazard mapping

The Campania Region (southern Italy) is characterized by the frequent occurrence of volcaniclastic debris flows that damage property and loss of life (more than 170 deaths between 1996 and 1999). Historical investigation allowed the identification of more than 500 events during the last four centuries; in particular, more than half of these occurred in the last 100 years, causing hundreds of deaths. The aim of this paper is to quantify debris-flow hazard potential in the Campania Region. To this end, we compared several elements such as the thickness distribution of pyroclastic fall deposits from the last 18 ka of the Vesuvius and Phlegrean Fields volcanoes, the slopes of relieves, and the historical record of volcaniclastic debris flows from A.D. 1500 to the present. Results show that flow occurrence is not only a function of the cumulative thickness of past pyroclastic fall deposits but also depends on the age of emplacement. Deposits younger than 10 ka (Holocene eruptions) apparently increase the risk of debris flows, while those older than 10 ka (Late Pleistocene eruptions) seem to play a less prominent role, which is probably due to different climatic conditions, and therefore different rates of erosion of pyroclastic falls between the Holocene and the Late Pleistocene. Based on the above considerations, we compiled a large-scale debris-flow hazard map of the study area in which five main hazard zones are identified: very low, low, moderate, high, and very high.     

Accretion rates on some debris slopes in the Mt. Rae area,Canadian Rocky Mountains

Accretion of debris was monitored on six slopes in the Mt. Rae area of the Canadian Rocky Mountains for the period 1975–1982. Monitoring was accomplished by measuring annually the accumulated debris on fabric mats which were placed on the long profile of the slopes. Annual rates of accretion were extremely variable between points on the same slope, between slopes, and between years. The data do not show a systematic decrease in accretion downslope but indicate that an absence of accretion is more likely on the lower half of the slopes. In general, annual rates are comparable to previously published values from the Rockies and the maximum rates of 30 to 40 mm per year are comparable to those from Karkevagge in Scandinavia. Extremely high rates of accretion were all related to extreme events such as debris flows or full depth snow avalanches. The variation in accretion rates is not explained by single environmental factors such as lithology and slope exposure.     

Slope instability induced by volcano-tectonics as an additional source of hazard in active volcanic areas: the case of Ischia island (Italy)

Ischia is an active volcanic island in the Gulf of Naples whose history has been dominated by a caldera-forming eruption (ca. 55 ka) and resurgence phenomena that have affected the caldera floor and generated a net uplift of about 900 m since 33 ka. The results of new geomorphological, stratigraphical and textural investigations of the products of gravitational movements triggered by volcano-tectonic events have been combined with the information arising from a reinterpretation of historical chronicles on natural phenomena such as earthquakes, ground deformation, gravitational movements and volcanic eruptions. The combined interpretation of all these data shows that gravitational movements, coeval to volcanic activity and uplift events related to the long-lasting resurgence, have affected the highly fractured marginal portions of the most uplifted Mt. Epomeo blocks. Such movements, mostly occurring since 3 ka, include debris avalanches; large debris flows (lahars); smaller mass movements (rock falls, slumps, debris and rock slides, and small debris flows); and deep-seated gravitational slope deformation. The occurrence of submarine deposits linked with subaerial deposits of the most voluminous mass movements clearly shows that the debris avalanches impacted on the sea. The obtained results corroborate the hypothesis that the behaviour of the Ischia volcano is based on an intimate interplay among magmatism, resurgence dynamics, fault generation, seismicity, slope oversteepening and instability, and eruptions. They also highlight that volcano-tectonically triggered mass movements are a potentially hazardous phenomena that have to be taken into account in any attempt to assess volcanic and related hazards at Ischia. Furthermore, the largest mass movements could also flow into the sea, generating tsunami waves that could impact on the island’s coast as well as on the neighbouring and densely inhabited coast of the Neapolitan area.     

Mass flows and river response in rapid uplifting regions – A case of lower Yarlung Tsangpo basin,southeast Tibet,China

The fluvial geomorphology in tectonically active (particularly rapid uplift) regions often undergoes continuous change. The rapid uplift is coincident with high erosion rates; consequently, incised valleys are formed. Mass flows (for example, avalanches, landslides, and debris flows) in incised valleys can markedly influence fluvial processes and even reshape valley geomorphology. However, these processes and long-term evolution corresponding to mass flows require further clarification. Field campaigns were carried out in the region near the Yigong Tsangpo and Palong Tsangpo Rivers (hereafter the Yigong and Palong Rivers), the two largest tributaries of the lower Yarlung Tsangpo River, to examine the feedback between fluvial processes and mass flows. Remote sensing images from recent decades were used to compare the channel morphology before and after typical mass flows (particularly catastrophic ones). The morphology of the lower Yigong River has evidently been impacted by landslides, while that of the Palong River has mainly been shaped by glacial processes and debris flows. At present, the morphology of the latter consists of alternating sections of gorges and wide valleys, with a staircase-like longitudinal profile. The gorge sections exhibit single and deeply incised channels with a high-gradient channel bed and terraces. In contrast, the wide valley sections consist of lakes, braided or anabranching channels, gentle bed gradients, and thick alluvial deposits. Debris flows occur more frequently in gullies in the reaches of the gorge sections and rarely in gullies along the wide valley sections. The occurrence of mass flow events has resulted in an imbalance of the previous (quasi-)equilibrium in the river morphology; however, this has triggered negative feedback that is driving the transient river morphology to a new state of (quasi-)equilibrium.     

Postglacial to Holocene landscape evolution and process rates in steep alpine catchments

Climate change and high magnitude mass wasting events pose adverse societal effects and hazards, especially in alpine regions. Quantification of such geomorphic processes and their rates is therefore critical but is often hampered by the lack of appropriate techniques and the various spatiotemporal scales involved in these studies. Here we exploit both in situ cosmogenic beryllium-10 (¹⁰Be) and carbon-14 (¹⁴C) nuclide concentrations for deducing exposure ages and tracing of sediment through small alpine debris flow catchments in central Switzerland. The sediment cascade and modern processes we track from the source areas, through debris flow torrents to their final export out into sink regions with cosmogenic nuclides over an unprecedented five-year time series with seasonal resolution. Data from a seismic survey and a 90 m core revealed a glacially overdeepened basin, filled with glacial and paraglacial sediments. Surface exposure dating of fan boulders and radiocarbon ages constrain the valley fill from the last deglaciation until the Holocene and show that most of the fan existed in early Holocene times already. Current fan processes are controlled by episodic debris flow activity, snow (firn) and rock avalanches. Field investigations, digital elevation models (DEMs) of difference and geomorphic analysis agree with sediment fingerprinting with cosmogenic nuclides, highlighting that the bulk of material exported today at the outlet of the subcatchments derives from the lower fans. Cosmogenic nuclide concentrations steadily decrease from headwater sources to distal fan channels due to the incorporation of material with lower nuclide concentrations. Further downstream the admixture of sediment from catchments with less frequent debris flow activity can dilute the cosmogenic nuclide signals from debris flow dominated catchments but may also reach thresholds where buffering is limited. Consequently, careful assessment of boundary conditions and driving forces is required when apparent denudation rates derived from cosmogenic nuclide analysis are upscaled to larger regions. © 2018 John Wiley & Sons, Ltd.     

Transport and emplacement mechanisms of channelised long-runout debris avalanches,Ruapehu volcano,New Zealand

The steep flanks of composite volcanoes are prone to collapse, producing debris avalanches that completely reshape the landscape. This study describes new insights into the runout of large debris avalanches enhanced by topography, using the example of six debris avalanche deposits from Mount Ruapehu, New Zealand. Individual large flank collapses (>1 km³) produced all of these units, with four not previously recognised. Five major valleys within the highly dissected landscape surrounding Mount Ruapehu channelled the debris avalanches into deep gorges (≥15 m) and resulted in extremely long debris avalanche runouts of up to 80 km from source. Classical sedimentary features of debris avalanche deposits preserved in these units include the following: very poor sorting with a clay-sand matrix hosting large subrounded boulders up to 5 m in diameter, jigsaw-fractured clasts, deformed clasts and numerous rip-up clasts of late-Pliocene marine sediments. The unusually long runouts led to unique features in distal deposits, including a pervasive and consolidated interclast matrix, and common rip-up clasts of Tertiary mudstone, as well as fluvial gravels and boulders. The great travel distances can be explained by the debris avalanches entering deep confined channels (≥15 m), where friction was minimised by a reduced basal contact area along with loading of water-saturated substrates which formed a basal lubrication zone for the overlying flowing mass. Extremely long-runout debris avalanches are most likely to occur in settings where initially partly saturated collapsing masses move down deep valleys and become thoroughly liquified at their base. This happens when pore water is available within the base of the flowing mass or in the sediments immediately below it. Based on their H/L ratio, confined volcanic debris avalanches are two to three times longer than unconfined, spreading flows of similar volume. The hybrid qualities of the deposits, which have some similarities to those of debris flows, are important to recognise when evaluating mass flow hazards at stratovolcanoes.     

Large landslides and their effect on sediment flux in South Westland,New Zealand

Landslides and runoff are dominant erosional agents in the tectonically active alpine South Westland area of New Zealand, characterized by high uplift rates and extreme orographic precipitation. Despite a high density of shallow debris slides and flows, the geomorphic imprints of deep‐seated bedrock failures are dominant and persistent. Over 50 large (>1 km²) landslides comprising rock slide[sol ]avalanches, complex rotational and rock‐block slides, wedge failures, and deep‐seated gravitational slope deformation were detected on air photos and shaded‐relief images. Major long‐term impacts on alpine rivers include (1) forced alluviation upstream of landslide dams, (2) occlusion of gorges and triggering of secondary riparian landslides, and (3) diversion of channels around deposits to form incised meandering gorges. Remnants of large prehistoric (i.e. pre‐1840) landslide deposits possibly represent the low‐frequency (in terms of total area affected yet dominant) end of the spectrum of mass wasting in the western Southern Alps. This is at odds with high erosion rates in an active erosional landscape. Large landslides appear to have dual roles of supplying and retaining sediment. The implications of these roles are that (1) previous models of (shallow) landslide‐derived sediment flux need to be recalibrated, and (2) geomorphic effects of earthquake‐induced landsliding may persist for at least 10² years. Copyright © 2005 John Wiley & Sons, Ltd.     

Variability in rainfall threshold for debris flow after the Chi-Chi earthquake in central Taiwan, China

The purpose of this study is to analyze variability in rainfall threshold for debris flow （critical rainfall for debris flow triggering） after the ML 7.3 Chi-Chi earthquake in central Taiwan in 1999. Two study sites with different geological conditions were surveyed in the earthquake area. Streambed surveys were conducted to continuously monitor debris flows between 1999 and 2006. During the 7-year study period, every debris flow event was identified, and the streambed characterized. Results show that the rainfall threshold for debris flow was remarkably lower just after the Chi-Chi Earthquake, but gradually recovered. To date, this rainfall threshold is still lower than the original level prior to the earthquake. This variability in rainfall threshold is closely related to the mount of sediment material in the initiation area of debris flow, which increased rapidly due to landslides resulting from the earthquake. With the increase in sediment material, the rainfall threshold was lowered severely during the first year following the Chi-Chi earthquake. However, heavy rainfalls mobilized the sediment material, causing debris flows and transporting sediment downstream. With the decrease in sediment material, the rainfall threshold recovered gradually over time. Furthermore, debris flows occurred only in the subbasins that had sufficient sediment material to cause significant movement. Hence, these results confirm that the sediment material in the initiation area of debris flow is a crucial component of the rainfall threshold for debris flow.     

Debris flow during intense rainfall in Snowdonia,North Wales: A preliminary survey

Intense rainfall after the abnormally dry and warm summer of 1983 triggered debris flows in mountainous terrain in North Wales. This preliminary investigation concentrates on a flow which blocked the A5, requiring £56,000 of remedial work. An estimated 118·4 mm of rain fell over steep, rocky catchments in 5 hrs (peak intensity 39·9 mm hr^?1) and water emerging from a rock chute mobilized colluvium on lower slopes, in which pore water pressure was probably already rising fast and bulk properties and other geotechnical conditions, including low shearing resistance, were favourable. Debris flowed in a narrow concave track 585 m long, x slope 27·8°, descending 282 m. The scoured channel, levées and debris lobes typical of documented flows elsewhere suggest that flow was rapid, turbulent, and pulsing.     

Geology, failure conditions, and implications of seismogenic avalanches of the 1944 eruption at Vesuvius, Italy

Widespread avalanching occurred at Mt. Vesuvius during its 1944 eruption, the latest activity of this volcano. The 1944 avalanche deposits display many of the morphological and structural features shown by common slides of the slump-earth flow variety, including levees, transverse ridge-and-trough topography, and preserved stratigraphy. The longest avalanche travelled 1.3 km, with an estimated volume of slightly more than one million cubic meters. Avalanches came to rest on moderately-inclined slopes. Internal structure includes low- and high-angle shears and tensional fractures. Deposits are poorly consolidated. Two lithologic types are observed; avalanches composed of both blocks and ash, with blocky rubble forming a capping layer, and avalanches composed almost wholly of ash. Block-and-ash avalanches were triggered where slopes of loose tephra had been preloaded with lava flows. Ash avalanches formed where heavy accumulations of ash were deposited by prevailing winds. Seismic activity accompanying eruption served as a trigger for avalanching.