共查询到20条相似文献,搜索用时 31 毫秒
1.
Numerical Simulation of Local Scour Around A Large Circular Cylinder Under Wave Action 总被引:1,自引:0,他引:1
A horizontal two- dimensional numerical model is developed for estimation of sediment transport and sea bed change around a large circular cylinder under wave action. The wave model is based on an elliptic mild slope equation. The wave-induced current by the gradient of radiation stress is considered and a depth integrated shallow water equation is applied to the calculation of the current. The mass transport velocity and the bed shear stress due to streaming are considered, which are important factors affecting the sediment transport around a structure due to waves, especially in reflective areas. Wave-current interaction is taken into account in the model for computing the bed shear stress. The model is implemented by a finite element method. The results of this model are compared with those from other methods and agree well with experimental data. 相似文献
2.
渤海海峡沉积物输运的参数化计算 总被引:1,自引:1,他引:0
本文以2018年冬季渤海海峡两个站位的定点连续观测数据为基础,使用一维参数化方案,计算了观测站位底边界层内的水平悬浮物输运通量以及推移质输运量。在参数化方案中,简化的一维对流扩散方程被用于计算底边界层内的垂向悬浮物浓度。为了验证参数化方案的可靠性,本文基于观测数据对比了两种底剪切应力计算模型、四种临界起动剪切应力计算方法和两种一维对流扩散方程解法。对比结果表明:(1)不同模型计算的底剪切应力结果相近;(2)临界起动剪切应力受到颗粒间黏性作用的影响;(3)一维对流扩散方程的求解过程需要考虑沉积物浓度的分层效应和不同粒级颗粒临界起动剪切应力的差异。基于上述对比结果确定的最优参数化方案,进一步计算了观测站位的沉积物输运量:(1)在有再悬浮的时段,距底5 m内的水平悬浮物通量占全水深悬浮物通量的比例(T01站约为21%,T02站约为17%)显著高于相同层位水通量的占比;(2)依据参数化方案估算的冬季平均的悬浮物通量比忽略底边界层悬浮物浓度垂向变化的传统方法结果高约16%;(3)推移质输运量比悬移质输运量约低两个数量级。 相似文献
3.
对Li&Cheng的势流模型在数值方法、床面平衡条件及冲刷床面调整技术做出了3方面的改进。采用边界元法代替差分法求解Laplace方程,前者可以准确地拟合地形与管道边界,因而可以准确反映固壁边界对流态的影响,此外,还具有数据准备简单,降低计算维数,计算速度快等优点。Li&Cheng模型以床面水流切应力等于泥沙起动切应力,τb=τc,作为床面平衡条件,这只适用于清水冲刷。以沿程输沙相同作为平衡剖面条件,理论上,将模型推广到了动床冲刷。此外,为了提高模型的收敛性,提出了最速下降法与牛顿迭代法相结合的床面调整技术。采用实验资料对模型进行了检验,计算的冲刷深度与实验结果符合良好。 相似文献
4.
A new model for the boundary layer development and associated skin friction coefficients and shear stress within the swash zone is presented. The model is developed within a Lagrangian reference frame, following fluid trajectories, and can be applied to both laminar flow and smooth turbulent flow. The model is based on the momentum integral approach for steady, flat-plate boundary layers, with appropriate modifications to account for the unsteady flow regime and flow history. The model results are consistent with previous measurements of bed shear stress and skin friction coefficients within the swash zone. These indicate strong temporal and spatial variation throughout the swash cycle, and a clear distinction between the uprush and backwash phase. This variation has been previously attributed the unsteady flow regime and flow history effects, both of which are accounted for in the new model. Fluid particle trajectories and velocity are computed using the non-linear shallow water wave equations and the boundary layer growth across the entire swash zone is estimated. Predictions of the bed shear stress and skin friction coefficients agree reasonably well with direct bed shear stress measurements reported by Barnes et al. (Barnes, M.P., O’Donaghue, T., Alsina, J.M., Baldock, T.E., 2009. Direct bed shear stress measurements in bore-driven swash. Coastal Engineering 56 (8), 853–867) and, for a given flow velocity, give stresses which are consistent with the bias toward uprush sediment transport which has consistently been observed in measurements. The data and modelling suggest that the backwash boundary layer is initially laminar, which results in the late development of significant bed shear during the backwash, with a transition to a turbulent boundary layer later in the backwash. A new conceptual model for the boundary layer structure at the leading edge of the swash is proposed, which accounts for both the no-slip condition at the bed and the moving wet–dry interface. However, further development of the Lagrangian Boundary Layer Model is required in order to include bore-generated turbulence and to account for variable roughness and mobile beds. 相似文献
5.
Understanding of sea bottom boundary layer characteristics, especially bottom shear stress acting on the sea bed, is an important step needed in sediment transport modeling for practical application purposes. In the present study, a new generation system for bottom boundary layer under solitary wave is proposed. Applicability of this system is examined by comparing measured and numerical solution velocities. Moreover, transitional behavior from laminar to turbulence was investigated. It is concluded that the critical Reynolds number in the experiments shows good agreement with DNS result of Vittori and Blondeaux (2008) and laboratory data of Sumer et al. (2010), indicating validity of the generation system. Since the present generation system enables continuous measurement to obtain ensemble averaged quantities, it can be effectively utilized for future experimental studies on solitary wave boundary layers, including sediment transport experiments with movable bed. 相似文献
6.
This paper presents an investigation of the roughness effects in the turbulent boundary layer for asymmetric waves by using the baseline (BSL) k–ω model. This model is validated by a set of the experimental data with different wave non-linearity index, Ni (namely, Ni = 0.67, Ni = 0.60 and Ni = 0.58). It is further used to simulate asymmetric wave velocity flows with several values of the roughness parameter (am/ks) which increase gradually, namely from am/ks = 35 to am/ks = 963. The effect of the roughness tends to increase the turbulent kinetic energy and to decrease the mean velocity distribution in the inner boundary layer, whereas in the outer boundary layer, the roughness alters the turbulent kinetic energy and the mean velocity distribution is relatively unaffected. A new simple calculation method of bottom shear stress based on incorporating velocity and acceleration terms is proposed and applied into the calculation of the rate of bed-load transport induced by asymmetric waves. And further, the effect of bed roughness on the bottom shear stress and bed-load sediment transport under asymmetric waves is examined with the turbulent model, the newly proposed method, and the existing calculation method. It is found that the higher roughness elements increase the magnitude of bottom shear stress along a wave cycle and consequently, the potential net sediment transport rate. Moreover, the wave non-linearity also shows a big impact on the bottom shear stress and the net sediment transport. 相似文献
7.
Characteristics of turbulent boundary layers over a rough bed under saw-tooth waves and its application to sediment transport 总被引:1,自引:0,他引:1
A large number of studies have been done dealing with sinusoidal wave boundary layers in the past. However, ocean waves often have a strong asymmetric shape especially in shallow water, and net of sediment movement occurs. It is envisaged that bottom shear stress and sediment transport behaviors influenced by the effect of asymmetry are different from those in sinusoidal waves. Characteristics of the turbulent boundary layer under breaking waves (saw-tooth) are investigated and described through both laboratory and numerical experiments. A new calculation method for bottom shear stress based on velocity and acceleration terms, theoretical phase difference, φ and the acceleration coefficient, ac expressing the wave skew-ness effect for saw-tooth waves is proposed. The acceleration coefficient was determined empirically from both experimental and baseline k–ω model results. The new calculation has shown better agreement with the experimental data along a wave cycle for all saw-tooth wave cases compared by other existing methods. It was further applied into sediment transport rate calculation induced by skew waves. Sediment transport rate was formulated by using the existing sheet flow sediment transport rate data under skew waves by Watanabe and Sato [Watanabe, A. and Sato, S., 2004. A sheet-flow transport rate formula for asymmetric, forward-leaning waves and currents. Proc. of 29th ICCE, ASCE, pp. 1703–1714.]. Moreover, the characteristics of the net sediment transport were also examined and a good agreement between the proposed method and experimental data has been found. 相似文献
8.
本文用了一个可考虑相位差作用和波浪边界层非对称性的瞬态理论模型和一个两相紊流模型共同研究非对称歪斜波引起的片流输沙现象。为了解速度偏度和加速度偏度对输沙通量和输沙率的贡献,两相流模型为理论模型提供了必要的相位超前、瞬时侵蚀深度和边界层的发展过程。理论模型研究显示了由速度偏度和加速度偏度引起的向岸阶段和离岸阶段的泥沙运动非对称性,解释了净输沙的产生原因。在以往的非对称歪斜波片流输沙研究中,净输沙的产生主要被归结于相位差作用。本文的研究则表明了非对称的边界层发展所产生的净流量和动床面效应在净输沙产生过程中的比相位差作用更为重要。 相似文献
9.
A simple conceptual formulation to compute seabed shear stress due to asymmetric and skewed waves is presented. This formulation generalizes the sinusoidal wave case and uses a variable friction factor to describe the physics of the boundary layer and to parameterize the effects of wave shape. Predictions of bed shear stresses agree with numerical computations using a standard boundary layer model with a k–ε turbulence closure. The bed shear stress formulation is combined with a Meyer-Peter and Müller-type formula to predict sheet flow bedload transport under asymmetric and skewed waves for a horizontal or sloping bed. The predictions agree with oscillatory water tunnel measurements from the literature. 相似文献
10.
Empirical formulas have been developed to calculate the fractional bed-load and suspended-load transport rates and near-bed suspended-load concentration under non-breaking waves and currents for coastal applications. The formulas relate the bed-load transport rate to the grain shear stress, the suspended-load transport rate to the energy of the flow system, and the near-bed suspended-load concentration to the bed-load transport rate, velocity and layer thickness. Adequate methods are adopted to determine the bed shear stress due to coexisted waves and currents. The hiding and exposure mechanism in nonuniform bed material is considered through a correction factor that is related to the hiding and exposure probabilities and in turn the size composition of bed material. The developed formulas have been tested using a large database of single-sized sediment transport and several sets of multiple-sized sediment transport data collected from literature, and compared with several existing formulas. The developed formulas can provide reasonably good predictions for the test cases. 相似文献
11.
Mechanism of local scour around submarine pipelines based on numerical simulation of turbulence model 总被引:2,自引:2,他引:0
1 IntroductionSubmarine pipelines are important ocean engi-neeringequipm ents, especiallyfortheoiland gasin-dustries. M anyresearchershavebeendedicatedtotheproblem of local scour around the submarinepipelines, butmostoftheirwork arelaboratory testsand foc… 相似文献
12.
根据河口海岸水沙输移的特点,建立了一个新的二维分组数学模型,用来预测该区域的水沙输移过程。该模型耦合了水动力模块、泥沙输移模块和床面演变模块。其中水动力模块基于浅水方程组,综合考虑了柯氏力、床面切应力以及表面风应力的影响,引入干湿判断法处理动边界。泥沙输移模块首先将泥沙按照粒径分组,针对不同泥砂性质,对各组泥沙分别进行建模求解。床面演变模块基于质量守恒方程,实时更新床面高程以及床沙级配变化,并传递给水动力模块,更新底部边界。该模型被应用在了英国塞汶(Severn)河口,其预测的泥沙浓度和实测数据以及不分组的模型的预测结果进行了比较,结果显示,文中建立的分组模型预测的结果要明显好于不分组模型。 相似文献
13.
This paper presents a wave-resolving sediment transport model, which is capable of simulating sediment suspension in the field-scale surf zone. The surf zone hydrodynamics is modeled by the non-hydrostatic model NHWAVE (Ma et al., 2012). The turbulent flow and suspended sediment are simulated in a coupled manner. Three effects of suspended sediment on turbulent flow field are considered: (1) baroclinic forcing effect; (2) turbulence damping effect and (3) bottom boundary layer effect. Through the validation with the laboratory measurements of suspended sediment under nonbreaking skewed waves and surfzone breaking waves, we demonstrate that the model can reasonably predict wave-averaged sediment profiles. The model is then utilized to simulate a rip current field experiment (RCEX) and nearshore suspended sediment transport. The offshore sediment transport by rip currents is captured by the model. The effects of suspended sediment on self-suspension are also investigated. The turbulence damping and bottom boundary layer effects are significant on sediment suspension. The suspended sediment creates a stably stratified water column, damping fluid turbulence and reducing turbulent diffusivity. The suspension of sediment also produces a stably stratified bottom boundary layer. Thus, the drag coefficient and bottom shear stress are reduced, causing less sediment pickup from the bottom. The cross-shore suspended sediment flux is analyzed as well. The mean Eulerian suspended sediment flux is shoreward outside the surf zone, while it is seaward in the surf zone. 相似文献
14.
Direct bed shear stress measurements in bore-driven swash 总被引:1,自引:0,他引:1
Direct measurements of bed shear in the swash zone are presented. The data were obtained using a shear plate in medium and large-scale laboratory bore-driven swash and cover a wide range of bed roughness. Data were obtained across the full width of the swash zone and are contrasted with data from the inner surf zone. Estimates of the flow velocities through the full swash cycle were obtained through numerical modelling and calibrated against measured velocity data. The measured stresses and calculated flow velocities were subsequently used to back-calculate instantaneous local skin friction coefficients using the quadratic drag law. The data show rapid temporal variation of the bed shear stress through the leading edge of the uprush, which is typically two–four times greater than the backwash shear stresses at corresponding flow velocity. The measurements indicate strong temporal variation in the skin friction coefficient, particularly in the backwash. The general behaviour of the skin friction coefficient with Reynolds number is consistent with classical theory for certain stages of the swash cycle. A spatial variation in skin friction coefficient is also identified, which is greatest across the surf-swash boundary and likely related to variations in local turbulent intensities. Skin friction coefficients during the uprush are approximately twice those in the backwash at corresponding Reynolds number and cross-shore location. It is suggested that this is a result of the no-slip condition at the tip leading to a continually developing leading edge and boundary layer, into which high velocity fluid and momentum are constantly injected from the flow behind and above the tip region. Finally, the measured stress data are used to determine the asymmetry and cross-shore variation in potential sediment transport predicted by three forms of sediment transport formulae. 相似文献
15.
《Marine Geology》2005,216(3):169-189
Simultaneous high frequency field measurements of water depth, flow velocity and suspended sediment concentration were made at three fixed locations across the high tide swash and inner surf zones of a dissipative beach. The dominant period of the swash motion was 30–50 s and the results are representative of infragravity swash motion. Suspended sediment concentrations, loads and transport rates in the swash zone were almost one order of magnitude greater than in the inner surf zone. The vertical velocity gradient near the bed and the resulting bed shear stress at the start of the uprush was significantly larger than that at the end of the backwash, despite similar flow velocities. This suggests that the bed friction during the uprush was approximately twice that during the backwash.The suspended sediment profile in the swash zone can be described reasonably well by an exponential shape with a mixing length scale of 0.02–0.03 m. The suspended sediment transport flux measured in the swash zone was related to the bed shear stress through the Shields parameter. If the bed shear stress is derived from the vertical velocity gradient, the proportionality coefficient between shear stress and sediment transport rate is similar for the uprush and the backwash. If the bed shear stress is estimated using the free-stream flow velocity and a constant friction factor, the proportionality factor for the uprush is approximately twice that of the backwash. It is suggested that the uprush is a more efficient transporter of sediment than the backwash, because the larger friction factor during the uprush causes larger bed shear stresses for a given free-stream velocity. This increased transport competency of the uprush is necessary for maintaining the beach, otherwise the comparable strength and greater duration of the backwash would progressively remove sediment from the beach. 相似文献
16.
《Coastal Engineering》2006,53(11):897-913
For the general purposes of morphodynamic computations in coastal zones, simple formula-based models are usually employed to evaluate sediment transport. Sediment transport rates are computed as a function of the bottom shear stress or the near bed flow velocity and it is generally assumed that the sediment particles react immediately to changes in flow conditions. It has been recognized, through recent laboratory experiments in both rippled and plane bed sheet flow conditions that sediment reacts to the flow in a complex manner, involving non-steady processes resulting from memory and settling/entrainment delay effects. These processes may be important in the cross-shore direction, where sediment transport is mainly caused by the oscillatory motions induced by surface short gravity waves.The aim of the present work is to develop a semi-unsteady, practical model, to predict the total (bed load and suspended load) sediment transport rates in wave or combined wave-current flow conditions that are characteristic of the coastal zone. The unsteady effects are reproduced indirectly by taking into account the delayed settling of sediment particles. The net sediment transport rates are computed from the total bottom shear stress and the model takes into account the velocity and acceleration asymmetries of the waves as they propagate towards the shore.A comparison has been carried out between the computed net sediment transport rates with a large data set of experimental results for different flow conditions (wave-current flows, purely oscillatory flow, skewed waves and steady currents) in different regimes (plane bed and rippled bed) with fine, medium and coarse uniform sand. The numerical results obtained are reasonably accurate within a factor of 2. Based on this analysis, the limits and validity of the present formulation are discussed. 相似文献
17.
1 .IntroductionWiththedevelopmentofexploitationofmarineresources ,theconstructionofoffshorestructuresdevelopsrapidly ,suchasmarineoilplatforms ,deep waterbreakwaters ,marinebridges ,largehar bors,etc .Thesestructureswillchangesurroundingwaveandcurrentconditionsandleadtolocalscourofseabed ,resultinginstructuraldamage .Therefore ,localscouraroundmarinestructuresaswellastheirprotectionhasdrawnmuchattentionfromrelativeengineeringfields .Manyscholarshaveconduct edtheoreticalanalysisandexperimentals… 相似文献
18.
Alan M. Davies Jiuxing Xing John M. Huthnance Philip Hall Laurenz Thomsen 《Progress in Oceanography》2002,52(2-4)
A three dimensional time-dependent baroclinic hydrodynamic model, including sediment transport and incorporating a turbulence energy sub-model, is used in cross sectional form to examine sediment movement at the shelf edge off North West Iberia at 42°40.5’N where measurements were made as part of the OMEX-II programme. These calculations are complemented by a simpler, in essence time-independent model, which is used to examine the sensitivity of the sediment distribution over the slope (from a shelf-break source) to changes in the specified values of horizontal and vertical diffusion coefficients. The philosophy of the paper is to use idealized tidal, wind and wind wave forcing to examine changes in sediment distribution resulting from these processes. Calculations with the time-dependent and steady state models give insight into both the role of events and long-term effects. The steady state model focuses on the off-shelf region, whilst the time-dependent model considers on-shelf events.Tidal calculations showed that for the stratification used here the internal tide in the OMEX region was primarily confined to the shelf edge and ocean. A mean on-shelf sediment transport in the surface layer and off-shelf transport at the bed was found. Across-shelf circulations produced by up-welling/down-welling favourable winds gave rise to on-shelf/off-shelf currents in the bottom boundary layer with an opposite flow in the surface layer. In the case of an up-welling favourable wind, sediment suspension was at a maximum in the near coastal region, with sediment being advected off shore in the surface layer. With a down-welling favourable wind, surface sediment was advected towards the shore, but there was offshore transport at the bed. Near the shelf edge any upwelling flow had the tendency to return this sediment to the surface layer from whence it was transported on-shore. So in essence the sediment was trapped within an on-shelf circulation cell. Wind waves effects increased the total bed stress and hence the sediment concentration and its transport, although its pattern was determined by tidal and wind forcing.The time independent model with increased/decreased lateral diffusivity gave an enhanced/reduced horizontal sediment distribution for a given settling velocity. As the settling velocity increases, the down-slope movement of sediment is increased, with a reduction in the thickness of the near-bed sediment layer, but with little change in its horizontal extent. 相似文献
19.
风暴过程中潮滩悬沙浓度和悬沙输运的变化及其动力机制——以长江三角洲南汇潮滩为例 总被引:1,自引:1,他引:0
悬沙浓度是淤泥质海岸重要的环境指标。为探讨潮滩悬沙浓度和悬沙输运对风暴事件的响应过程及其动力机制,于2014年9月"凤凰"台风过境前、中、后在长江三角洲南汇潮滩进行了现场观测,获得同步高分辨率的水深、波高、近底流速和浊度剖面时间序列(9个潮周期)。结果表明,风暴中平均和最大波高、波-流联合底床剪切应力、悬沙浓度和悬沙输运率可比平静天气高数倍;风暴期间高潮位低流速阶段悬沙沉降导致近底发育数十厘米厚的浮泥层(悬沙浓度大于10 g/L)。研究认为风暴事件中淤泥质海岸悬沙浓度和悬沙输运的剧烈变化其根本动力机制是风暴把巨大能量传递给近岸水体,进而显著增大波-流联合底床剪切应力,导致细颗粒泥沙再悬浮。 相似文献
20.
Muk Chen Ong Torbjørn Utnes Lars Erik Holmedal Dag Myrhaug Bjørnar Pettersen 《Coastal Engineering》2010
High Reynolds number flows around a circular cylinder close to a flat seabed have been computed using a two-dimensional standard high Reynolds number k–ε turbulence model. The effects of gap to diameter ratio, Reynolds number and flat seabed roughness for a given boundary layer thickness of the inlet flow upstream of the cylinder have been investigated. Hydrodynamic quantities and the resulting bedload transport have been predicted, and the vortex shedding mechanisms have been investigated. Predictions of hydrodynamic quantities around a cylinder located far away from the bed (so that the effect of the bed is negligible) are in satisfactory agreement with published experimental data and numerical results obtained for the flow around an isolated cylinder. Results for lower Reynolds number flows have also been computed for comparison with the high Reynolds number flow results. Overall it appears that the present approach is suitable for design purposes at high Reynolds numbers which are present near the seabed in the real ocean. 相似文献