Sedimentological and deformational criteria for discriminating subglaciofluvial deposits from subaqueous ice‐contact fan deposits: A Pleistocene example (Ireland)

A pit located near Ballyhorsey, 28 km south of Dublin (eastern Ireland), displays subglacially deposited glaciofluvial sediments passing upwards into proglacial subaqueous ice‐contact fan deposits. The coexistence of these two different depositional environments at the same location will help with differentiation between two very similar and easily confused glacial lithofacies. The lowermost sediments show aggrading subglacial deposits indicating a constrained accommodation space, mainly controlled by the position of an overlying ice roof during ice‐bed decoupling. These sediments are characterized by vertically stacked tills with large lenses of tabular to channelized sorted sediments. The sorted sediments consist of fine‐grained laminated facies, cross‐laminated sand and channelized gravels, and are interpreted as subglaciofluvial sediments deposited within a subglacial de‐coupled space. The subglaciofluvial sequence is characterized by glaciotectonic deformation structures within discrete beds, triggered by fluid overpressure and shear stress during episodes of ice/bed recoupling (clastic dykes and folds). The upper deposits correspond to the deposition of successive hyperpycnal flows in a proximal proglacial lake, forming a thick sedimentary wedge erosively overlying the subglacial deposits. Gravel facies and large‐scale trough bedding sand are observed within this proximal wedge, while normally graded sand beds with developed bedforms are observed further downflow. The building of the prograding ice‐contact subaqueous fan implies an unrestricted accommodation space and is associated with deformation structures related to gravity destabilization during fan spreading (normal faults). This study facilitates the recognition of subglacial/submarginal depositional environments formed, in part, during localized ice/bed coupling episodes in the sedimentary record. The sedimentary sequence exposed in Ballyhorsey permits characterization of the temporal framework of meltwater production during deglaciation, the impact on the subglacial drainage system and the consequences on the Irish Sea Ice Stream flow mechanisms.     

Fluid-pressure controlled soft-bed deformation sequence beneath the surging Breiðamerkurjökull (Iceland, Little Ice Age)

The general subject of this paper is subglacial deformation beneath Breiðamerkurjökull, a surging Icelandic glacier. More specifically it discusses the evolution and the role of fluid pressure on the behaviour of subglacial sediments during deformation. During Little Ice Age maximum, the two outcrops studied, North Jökulsarlon (N-Jk) and Brennhola-Alda (BA), were located at 2550 m and 550 m respectively from the front of the Breiðamerkurjökull. Sedimentological analysis at the forefield of the glacier shows thick, coarse glaciofluvial deposits interbedded with thin, fine-grained shallow lacustrine/swamp deposits, overlain by a deformed till unit at N-Jk. BA outcrop shows fine-grained shallow lacustrine/swamp deposits overlain by a deformed till unit. The sequence of deformation events from one outcrop to the other is similar. First, major thrust planes, which were rooted in shallow lacustrine/swamp deposits developed by glacially induced simple shear. Next, the thrusts were folded, indicating the deformation of hydroplastic sediment assisted by moderate fluid pressure. Then clastic dyke swarms crosscut the sedimentary succession, proving that fluid overpressure caused hydrofracturing associated with fluidisation. Finally, as water escaped from the glacier bed, fluid pressure dropped, and normal faulting occurred in brittle-state subglacial sediments. Fluid-pressure variations are related to glacier dynamics. They control the deformation sequence by modifying subglacial rheological behaviour and the nature of the subglacial tectonism.     

Till‐forming processes beneath parts of the Cordilleran Ice Sheet,British Columbia,Canada: macroscale and microscale evidence and a new statistical technique for analysing microstructure data

This paper presents the first integrated macroscale and microscale examination of subglacial till associated with the last‐glacial (Fraser Glaciation) Cordilleran Ice Sheet (CIS). A new statistical approach to quantifying till micromorphology (multivariate hierarchical cluster analysis for compositional data) is also described and implemented. Till macrostructures, macrofabrics and microstructures support previous assertions that primary till in this region formed through a combination of lodgement and deformation processes in a temperate subglacial environment. Macroscale observations suggest that subglacial environments below the CIS were probably influenced by topography, whereby poor drainage of the substrate in topographically constricted areas, or on slopes adverse to the ice‐flow direction at glacial maximum, facilitated ductile deformation of the glacier bed. Microscale observations suggest that subglacial till below the CIS experienced both ductile and brittle deformation, including grain rotation and squeeze flow of sediment between grains under moist conditions, and microshearing, grain stacking and grain fracturing under well‐drained conditions. Macroscale observations suggest that ductile deformation events were probably followed by brittle deformation events as the substrate subsequently drained. The prevalence of ductile‐type microstructures in most till exposures investigated in this study suggests that ductile deformation signatures can be preserved at the microscale after brittle deformation events that result in larger‐scale fractures and shear structures. It is likely that microscale ductile deformation can also occur within distributed shear zones during lodgement processes. Cluster analysis of microstructure data and qualitative observations made from thin sections suggest that the relative frequency of countable microstructures in this till is influenced by topography in relation to ice‐flow direction (bed drainage conditions) as well as by the frequency and distribution of voids in the till matrix and skeletal grain shapes.     

Insights into subglacial processes inferred from the micromorphological analyses of complex diamicton stratigraphy near Illmensee‐Lichtenegg,Höchsten,Germany

Menzies, J. & Ellwanger, D. 2010: Insights into subglacial processes inferred from the micromorphological analyses of complex diamicton stratigraphy near Illmensee‐Lichtenegg, Höchsten, Germany. Boreas, 10.1111/j.1502‐3885.2010.00194.x. ISSN 0300‐9483. Investigations of a 30‐m‐high section of Pleistocene sediments at Illmensee‐Lichtenegg, Höchsten in Baden‐Württemberg provide detailed information on subglacial conditions beneath the Rhine Glacier outlet of the Alpine ice sheet in southern Germany. The sediment exposure extends from an upper cemented sand and gravel (Deckenschotter) into diamictic units that extend down to weathered Molasse bedrock. The exposure reveals sediments symptomatic of active syndepositional stress/strain processes ongoing beneath the ice sheet. Macrosedimentology reveals diamicton subfacies units and a strong uni‐direction of ice motion based on clast fabric analyses. At the microscale level, thin‐section analyses provide a substantially clearer picture of the dynamics of subglacial sediment deformation and till emplacement. Evidence based on detailed micromorphological analyses reveals microstructural strain and depositional markers that indicate a subglacial environment of ongoing soft bed deformation in which the diamictons can be readily identified as subglacial tills. Within this subglacial environment, distinct changes in pore‐water pressure and sediment rheology can be detected. These changes reveal fluctuating conditions of progressive, non‐pervasive deformation associated with rapid changes in effective stress and shear strain leading to till emplacement. This site, through the application of micromorphology, increases our understanding of localized subglacial conditions and till formation.     

Subglacial deformation at sub-freezing temperatures? Evidence from Hagafellsjökull-Eystri,Iceland

We report evidence of deformation at sub-freezing temperatures beneath Hagafellsjökull-Eystri, an Icelandic surge-type glacier. The bed of a piedmont lobe that advanced during the 1999 surge comprises deformed blocks of glacier ice set within frozen sediment. This material has also been injected through overlying ice to form a network of crevasse-squeeze ridges. This layer contains evidence for two phases of deformation under contrasting rheological conditions: (1) deformation under relatively warm conditions, when the blocks of glacier ice acted as competent clasts within an unfrozen deforming matrix and (2) subsequent deformation at sub-freezing temperatures when the ice blocks were attenuated into the surrounding frozen matrix along fractures and planar shears enriched with excess ice. This suggests that the basal thermal regime of the advancing ice margin changed from warm-based to cold-based during the surge event. The persistence and potential prevalence of subglacial sediment deformation at sub-freezing temperatures has fundamental implications for our understanding of the dynamic behaviour, sediment flux and geomorphic ability of cold-based glaciers.     

Neoglacial (<3000 years) till and flutes at Saskatchewan Glacier,Canadian Rocky Mountains,formed by subglacial deformation of a soft bed

Understanding the processes that deposit till below modern glaciers provides fundamental information for interpreting ancient subglacial deposits. A process‐deposit‐landform model is developed for the till bed of Saskatchewan Glacier in the Canadian Rocky Mountains. The glacier is predominantly hard bedded in its upper reaches and flows through a deep valley carved into resistant Palaeozoic carbonates but the ice margin rests on a thick (<6 m) soft bed of silt‐rich deformation till that has been exposed as the glacier retreats from its Little Ice Age limit reached in 1854. In situ tree stumps rooted in a palaeosol under the till are dated between ca 2900 and 2700 yr bp and record initial glacier expansion during the Neoglacial. Sedimentological and stratigraphic observations underscore the importance of subglacial deformation of glaciofluvial outwash deposited in front of the advancing glacier and mixing with glaciolacustrine carbonate‐rich silt to form a soft bed. The exposed till plain has a rolling drumlinoid topography inherited from overridden end moraines and is corrugated by more than 400 longitudinal flute ridges which record deformation of the soft bed and fall into three genetically related types: those developed in propagating incipient cavities in the lee of large subglacial boulders embedded in deformation till, and those lacking any originating boulder and formed by pressing of wet till up into radial crevasses under stagnant ice. A third type consists of U‐shaped flutes akin to barchan dunes; these wrap around large boulders at the downglacier ends of longitudinal scours formed by the bulldozing of boulders by the ice front during brief winter readvances across soft till. Pervasive subglacial deformation during glacier expansion was probably facilitated by large boulders rotating within the soft bed (‘glacioturbation’).     

Deforming bed conditions on the Dánischer Wohld Peninsula, northern Germany

At the Dänischer Wohld Peninsula coastal sections (North West Germany), subglacial deformation was found at three scales. At the smallest scale, features typical of deforming bed tills were found, i.e. small boudins, tectonic laminations and low fabric strength till. At an intermediate scale, large lenses of glaciolacustrine sediments were found within subglacially deformed till. At the largest scale, there were large (over 5 m high) subglacial folds. We suggest that these styles of sedimentation/deformation were associated with a series of readvances during overall glacial retreat: subglacial deformation occurred during each advance and glaciolacus trine sedimentation occurred during each retreat. This led to glaciolacustrine sediments and deforming bed tills being folded together during subsequent readvances. Where the rheology was relatively weak, the lacustrine sediments were totally incorporated into the diamicton and lost their previous identity. However, where the glaciolacustrine sediments were relatively strong, they survived. We suggest that this style of deformation is typical of the conditions just upglacier from the ice margin and is associated with a relatively thick deforming layer and a high input of subglacial sediment. We conclude that the evidence found at this site provides further indications that the southern margins of the Fenno-Scandinavian ice sheet were coupled with the glacier bed and underwent deforming bed conditions.     

Subglacial drainage by groundwater-channel coupling,and the origin of esker systems: Part 1—glaciological observations

OverallThis work is presented in two parts. Part I presents observations on the coupling between subglacial channel flow and groundwater flow in determining subglacial hydraulic regime and creating eskers from an Icelandic glacier that is suggested as an analogue for many parts of Pleistocene ice sheets. Part II develops a theory of perennial subglacial stream flow and the origin of esker systems, and models the evolution of the subglacial stream system and associated groundwater flow in a glacier of the type described in Part I. It is suggested that groundwater flow may be the predominant mechanism whereby meltwater at the glacier bed finds its way to the major subglacial streams that discharge water to glacier margins.Part IBoreholes drilled through an Icelandic glacier into an underlying till and aquifer system have been used to measure variations in head in the vicinity of a perennial subglacial stream tunnel during late summer and early winter. They reveal a subglacial groundwater catchment that is drained by a subglacial stream along its axis. The stream tunnel is characterised by low water pressures, and acts as a drain for the groundwater catchment, so that groundwater flow is predominantly transverse to ice flow, towards the channel.These perennial streams flow both in summer and winter. Their portals have lain along the same axes for the 5 km of retreat that has occurred since the end of the Little Ice Age, 100 years ago, suggesting that the groundwater catchments have been relatively stable for at least this period. In the winter season, stream discharges are largely derived from basal melting, but during summer, water derived from the glacier surface finds its way, via fractures and moulins, to the glacier bed, where it dominates the meltwater flux. Additional subglacial streams are created in summer to help drain this greater flux from beneath the glacier, through poorly integrated and unstable networks. Summer streams cease to flow during winter and tend not to form in the same places in the following summer. Perennial streams are the stable component of the system and are the main sources of extensive esker systems.Strong flow of groundwater towards low-pressure areas along channels and the ice margin is a source of major upwelling that can produce sediment liquefaction and instability. A theory is developed to show how this could have a major effect on subglacial sedimentary processes.     

Microsedimentology of ice stream tills from the Eastern Alps,Austria – a new perspective on till microstructures

This study of tills from the Eastern Alps, Austria, illustrates the insights obtained using microsedimentology on subglacial tills in the context of palaeogeographical reconstructions of glacier advances. Investigations of several sites with tills derived from both local glaciers and the ice‐sheet streaming of the Inn Glacier during the Last Glacial Maximum and its termination reveal a detailed picture of subglacial sedimentology that provides evidence of soft sediment subglacial deformation under polythermal conditions. All the tills exhibit microstructures that are proxy evidence of significant changes in till rheology. The tills originate from multiple sources, incorporating older tills and other deposits picked up by the subglacial deformation within a polythermal but dominantly warm temperate subglacial thermal regime. The analyses of till microstructures reveal a direct relationship between basal ice strain conditions and their development. A hypothesis is derived, from the various microstructures observed in these Austrian tills formed under soft sediment deforming basal ice conditions, that suggests that with basal thermal changes and fluctuations in clay content, pore‐water content and pressure, microstructures form in a non‐random manner. It is postulated that in clay‐deficient sediments, edge‐to‐edge events are most likely to occur first; and where clay content increases, grain stacks, rotation structures, deformation bands and, finally, shear zones are likely to evolve in an approximate sequential manner. After repeated transport, emplacement, reworking and, probably, further shearing and deformation events, an emplaced ‘till’, as observed in these Austrian tills, will form that carries most, if not all of these microstructures, in varying percentages. Finally, the impact of the Inn Glacier Ice Stream on these tills is not easily detected and/or differentiated, but indications of high pore water and probable dilatant events leading to reductions in the number of edge‐to‐edge events point to the impact of fast or thick ice upon these subglacial tills.     

Rotating micro-structures in Antarctic cold basal ice: implications for glacier flow and its interpretation

Structural analyses were conducted in the basal zone of an Antarctic glacier. The studied basal ice sequence was retrieved from a 20-m-long subglacial tunnel dug at the margin of the glacier and is at the temperature of −17°C. For the first time, rotating clast systems embedded within debris-rich ice were thin-sectioned using specially designed cutting techniques. The observed structures reflect the occurrence of pervasive shearing at the base of the glacier, and can be used as shear sense indicators. In addition, some of these structures provide evidence for the presence of thin liquid films at the time of formation despite the marked freezing temperature of the ice. It is showed here that cautious analysis of deformation structures present in debris-bearing ice may bring insights not only into the flow dynamics of the embedding matrix, but also into the behaviour of the interstitial fluid network at the base of cold glaciers and ice sheets.     

Till mélange at Amsdorf, central Germany: sediment erosion, transport and deposition in a complex, soft-bedded subglacial system

Glacial mélange in the open-cast mine at Amsdorf, central Germany, consists of several square meters of large, sorted sediment blocks embedded in till. The blocks are composed of largely intact to slightly deformed glaciofluvial and glaciolacustrine sand, silt and clay, initially deposited in a proglacial lake (2–3 km up-ice) and subsequently overridden by a glacier. The blocks typically have cuboid to subrounded outlines, are randomly distributed in the till, and the contacts with the surrounding till are distinctly sharp. Underneath the mélange are varved clays which exhibit strong deformations occasionally intervening with entirely undisturbed areas. It is suggested that the blocks were entrained into debris-rich basal-ice by bulk freeze-on when the glacier sole was lowered onto the bottom of an overridden lake. After entrainment the blocks were transported englacially and re-deposited (with far-traveled till matrix) as a melt-out till from stagnant ice. The glacier moved mainly by sliding enhanced by low-permeability varved clays in the substratum. The glacier is believed to have been of a polythermal type. These results show that bulk freeze-on can lead to entrainment of soft sediment blocks at least 20 m² in size, and that these blocks can be englacially transported with little or no deformation for several kilometers and more. The occurrence of deformed and undeformed clays under the till mélange indicates a possible mosaic of coupled and decoupled ice, the latter caused by a thin, transient subglacial water film separating the bed from the glacier.     

Formation of subglacial till under transient bed conditions: deposition, deformation, and basal decoupling under a Weichselian ice sheet lobe, central Poland

A multi-proxy approach involving a study of sediment architecture, grain size, grain roundness and crushing index, petrographic and clay mineral composition, till fabric and till micromorphology was applied to infer processes of till formation and deformation under a Weichselian ice sheet at Kurzetnik, Poland. The succession consists of three superposed till units overlying outwash sediments deformed at the top. The textural characteristics of tills vary little throughout the till thickness, whereas structural appearance is diversified including massive and bedded regions. Indicators of intergranular bed deformation include overturned, attenuated folds, boudinage structures, a sediment-mixing zone, grain crushing, microstructural lineations, grain stacking and high fabric strength. Lodgement proxies are grooved intra-till surfaces, ploughing marks and consistently striated clast surfaces. Basal decoupling by pressurized meltwater is indicated by undisturbed sand stringers, sand-filled meltwater scours under pebbles and partly armoured till pellets. It is suggested that the till experienced multiple transitions between lodgement, deformation and basal decoupling. Cumulative strain was high, but the depth of (time-transgressive) deformation much lower (centimetre range) than the entire till thickness ( ca 2 m) at any point in time, consistent with the deforming bed mosaic model. Throughout most of ice overriding, porewater pressure was high, in the vicinity of glacier floatation pressure indicating that the substratum, consisting of 11 m thick sand, was unable to drain subglacial meltwater sufficiently.     

Micromorphological evidence for subglacial multiphase sedimentation and deformation during overpressurized fluid flow associated with hydrofracturing

Hydrofracture systems are being increasingly recognized within subglacial to ice‐marginal settings and represent a visible expression of the passage of pressurized meltwater through these glacial environments. Such structures provide a clear record of the fluctuating hydrostatic pressure and of the resulting brittle fracturing of the host sediment/bedrock and the pene‐contemporaneous liquefaction and introduction of sediment‐fill. A detailed macro‐ and microstructural study of a hydrofracture system cutting Devonian sandstone bedrock exposed at the Meads of St John, near Inverness (NE Scotland), has revealed that this complex multiphase system was active over a prolonged period and accommodated several phases of fluid flow. The main conduits that fed the hydrofracture system are located along bedding within the sandstone, with the site of the wider, steeply inclined to subvertical, transgressive linking sections being controlled by the contemporaneous development of high‐angle fractures and normal faults, the latter occurring in response to localized extension within the bedrock. A comparison with published engineering hydraulic fracturing data indicates that the various stages of sediment‐fill deposited during a flow event can be directly related to the fluctuation in overpressure during hydrofracturing. A model is proposed linking the evolution of this hydrofracture system to the retreat of the overlying Findhorn glacier. The results of this study also indicate that the development and repeated reactivation of subglacial hydrofracture systems can have a dramatic effect on the permeability of the bed, influencing the potential for overpressure build‐up within the subglacial hydrogeological system, and facilitating the migration of meltwater beneath glaciers and ice sheets.     

Temporal changes in subglacial meltwater activity: field evidence from the late Devensian in the north of Ireland

Temporal changes in meltwater abundance, distribution and characteristics (controlling subglacial processes and ice sheet dynamics) can be inferred from subglacial sediment successions. Field evidence for changes in subglacial meltwater characteristics over time is presented from two sites (Doonan, Drummee) near a former late Weichselian (Devensian) ice centre in the north of Ireland. On a macroscale, both sites investigated show subglacial diamicton overlying glacially planated bedrock platforms. In more detail, primary sedimentary structures and facies variability show a complex relationship between depositional processes and meltwater characteristics at the ice/bed interface (IBI). Sedimentary evidence suggests sediment transport and deposition took place by low-viscosity subglacial slurries (mobile sediment–meltwater admixtures), which are part of a continuum between the processes of subglacial sediment deformation and subglacial meltwater flooding. Subtle changes in meltwater abundance and distribution at the IBI controlled slurry rheology, mechanisms of particle support and detailed sediment depositional processes.     

Glacial sedimentary processes and environmental reconstruction based on lithofacies

Glacigenic sediments exposed in pits around Villeneuve, near Edmonton, Alberta, are subdivided into facies based on grain size, sedimentary structure, glacially-induced deformation and faulting, and groove marks. Two diamicton facies are recognised, one of which is interpreted as a primary till, deposited directly from glacier ice, and the other as a product of mass-movement. The diamicton facies are closely associated with current bedded facies interpreted as fluvioglacial deposits. The stratigraphic sedimentological and tectonic aspects of these fluvial deposits suggest subglacial deposition in channels and cavities. At any one place the glacier appears to have alternated between being attached to the bed, causing thrusting and sole marking, and being separated from the bed by a cavity in which fluvial and mass-movement sediments accumulated. The net result is a highly complex and laterally variable stratigraphy produced by a single glacial advance. The correct interpretation of such sequences is essential if lithostratigraphy is to be used to establish glacial history. In addition, the interpretations presented here have implications regarding the formation of soft zones in ‘till’. They indicate that the soft zones are beds of sorted sediment redeposited by mass-movement.     

Ice marginal dynamics during surge activity,Kuannersuit Glacier,Disko Island,West Greenland

The Kuannersuit Glacier surged 11 km between 1995 and 1998. The surge resulted in the formation of an ice cored thrust moraine complex constructed by subglacial and proglacial glaciotectonic processes. Four main thrust zones are evident in the glacier snout area with phases of compressional folding and thrusting followed by hydrofracture in response to the build-up of compressional stresses and the aquicludal nature of submarginal permafrost and naled. Various types of stratified debris-rich ice facies occur within the marginal zone: The first (Facies I) comprises laterally continuous strata of ice with sorted sediment accumulations, and is reworked and thrust naled ice. The second is laterally discontinuous stratified debris-rich ice with distinct tectonic structures, and is derived through subglacial extensional deformation and localised regelation (Facies II), whilst the third type is characterised by reworked and brecciated ice associated with the reworking and entrainment of meteoric ice (Facies III). Hydrofracture dykes and sills (Facies IV) cross-cut the marginal ice cored thrust moraines, with their sub-vertically frozen internal contact boundaries and sedimentary structures, suggesting supercooling operated as high-pressure evacuation of water occurred during thrusting, but this is not related to the formation of basal stratified debris-rich ice. Linear distributions of sorted fines transverse to ice flow, and small stratified sediment ridges that vertically cross-cut the ice surface up-ice of the thrust zone relate to sediment migration along crevasse traces and fluvial infilling of crevasses. From a palaeoglaciological viewpoint, marginal glacier tectonics, ice sediment content and sediment delivery mechanisms combine to control the development of this polythermal surge valley landsystem. The bulldozing of proglacial sediments and the folding and thrusting of naled leads to the initial development of the outer zone of the moraine complex. This becomes buried in bulldozed outwash sediment and well-sorted fines through surface ablation of naled. Up-ice of this, the heavily thrust margin becomes buried in sediment melted out from basal debris-rich ice and subglacial diamicts routed along thrusts. These mechanisms combine to deliver sediment to supraglacial localities, and promote the initial preservation of structurally controlled moraines through insulation, and the later development of kettled dead ice terrain.     

Subglacial bed deformation and dynamics of the Apriķi glacial tongue,W Latvia

Saks, T., Kalvans, A. & Zel?s, V. 2012 (January): Subglacial bed deformation and dynamics of the Apri?i glacial tongue, W Latvia. Boreas, Vol. 41, pp. 124–140. 10.1111/j.1502‐3885.2011.00222.x. ISSN 0300‐9483. We evaluate the glacial dynamics and subglacial processes of the Apri?i glacial tongue in western Latvia during the Northern Lithuanian (Linkuva) oscillation of the last Scandinavian glaciation. The spatial arrangement of glacial bedforms and deformation structures are used to reconstruct the ice dynamics in the study area. The relationship between geological structures at the glacier bed and the spatial distribution of drumlins and glacigenic diapirs, on the one hand, and the permeability of sediment and bedrock, on the other, is ascertained. Drumlins are found in the upper part of the Apri?i glacial tongue area and are composed of soft deformable sediments overlying highly permeable Devonian dolomite. The soft deformable clayey silty bed with low hydraulic conductivity is conducive to the development of diapirs. The occurrence of diapirs and drumlins is controlled by the fluctuation of pore‐water pressure at the glacier bed and is considered to be an indicator of fast ice flow of the Apri?i glacial tongue during its reactivation at the end of the Oldest Dryas (18–15 ka BP).     

Late Ordovician glacial pavements revisited: a reappraisal of the origin of striated surfaces

The recognition of ice‐related unconformities is of prime importance when dealing with the sequential architecture of pre‐Pleistocene glacial successions. Late Ordovician striated surfaces strikingly preserved in North Gondwana were long considered as abrasion surfaces at the sole of a grounded glacier overriding unlithified sediments, or having resulted from the scouring action of drifting icebergs. Field observations from Mauritania and Libya show that these striated surfaces require an alternative interpretation, which can be applied to similar surfaces described elsewhere, such as in Permo‐Carboniferous or Neoproterozoic glacial sequences. A new model is proposed that involves superimposed concurrent décollement planes within a subglacial brittle shear zone in unlithified sand beds. Shear zones in subglacial sediments are well known in Quaternary deposits but, to date, it has not been demonstrated that they may form striated surfaces occurring at continent scale with orientations consistent with palaeo ice‐flow reconstructions based on larger‐scale indicators.     

青藏高原东南部贡嘎山海螺沟冰川冰下沉积物形成与变形

冰岩界面的冰川动力学是冰川系统的重要组成部分, 海螺沟冰川地处温暖湿润的海洋环境, 冰川运动速度较快, 冰川底部接近压融点, 是研究冰下过程的较理想地点. 在海螺沟冰川大型磨光面上浅显侵蚀坑内发现了碎屑物质. 对碎屑物质理化特征研究表明: 粒度特征、地球化学与石英砂SEM 分析表明沉积在冰岩界面上的物质来自于冰川底部的底碛层, 而不是冰上环境的产物. 偏光显微镜下观察到的冰下沉积物呈现出一系列塑性变形(微旋转、褶皱)和脆性变形(线性结构、支撑结构、断层)微观结构和构造. 两种变形结构的存在是碎屑物质在形成过程中其含水量波动情况的反映. 冰下碎屑物质是冰下融出、滞碛作用的共同产物. 在整个冰下碎屑物质形成与变形过程中, 由于冰下水系季节性变化带来的冰岩界面上冰川融水含量的波动起了决定性作用.