Response of active tectonics on the alluvial Baghmati River, Himalayan foreland basin, eastern India

Active tectonics in a basin plays an important role in controlling a fluvial system through the change in channel slope. The Baghmati, an anabranching, foothills-fed river system, draining the plains of north Bihar in eastern India has responded to ongoing tectonic deformation in the basin. The relatively flat alluvial plains are traversed by several active subsurface faults, which divide the area in four tectonic blocks. Each tectonic block is characterized by association of fluvial anomalies viz. compressed meanders, knick point in longitudinal profiles, channel incision, anomalous sinuosity variations, sudden change in river flow direction, river flow against the local gradient and distribution of overbank flooding, lakes, and waterlogged area. Such fluvial anomalies have been identified on the repetitive satellite images and maps and interpreted through DEM and field observations to understand the nature of vertical movements in the area. The sub-surface faults in the Baghmati plains cut across the river channel and also run parallel which have allowed us to observe the effects of longitudinal and lateral tilting manifested in avulsions and morphological changes.     

Basement controls upon basin development in the Caledonian foreland, NW Scotland

Abstract The Hebridean basins are part of a compartmentalized half-graben developed in the hanging wall of the partially reactivated Outer Isles Fault. The importance of geological inheritance in the development of these basins can be demonstrated clearly using the widespread exposure of metamorphic basement around the basin margins. The basement structures have been analysed using thematically mapped Landsat images in conjunction with selective field studies. Results of such studies have been integrated with maps generated from the interpretation of offshore multichannel seismic reflection profiles to produce an architectural framework for basin development.
It can be demonstrated that the principal basement faults originated in the early Proterozoic as mid-crustal shear zones and that they have subsequently been partially reactivated during post-Caledonian basin development beginning in the Carboniferous and probably also during an earlier period of basin development in the late Proterozoic (the Torridonian). It is the geometry of the pre-existing basement structures that has controlled the three-dimensional shape of the sedimentary basins and the spatial and temporal distribution of the basin fill.     

Evolution of the late Cenozoic Chaco foreland basin, Southern Bolivia

Eastward Andean orogenic growth since the late Oligocene led to variable crustal loading, flexural subsidence and foreland basin sedimentation in the Chaco basin. To understand the interaction between Andean tectonics and contemporaneous foreland development, we analyse stratigraphic, sedimentologic and seismic data from the Subandean Belt and the Chaco Basin. The structural features provide a mechanism for transferring zones of deposition, subsidence and uplift. These can be reconstructed based on regional distribution of clastic sequences. Isopach maps, combined with sedimentary architecture analysis, establish systematic thickness variations, facies changes and depositional styles. The foreland basin consists of five stratigraphic successions controlled by Andean orogenic episodes and climate: (1) the foreland basin sequence commences between ～27 and 14 Ma with the regionally unconformable, thin, easterly sourced fluvial Petaca strata. It represents a significant time interval of low sediment accumulation in a forebulge‐backbulge depocentre. (2) The overlying ～14–7 Ma‐old Yecua Formation, deposited in marine, fluvial and lacustrine settings, represents increased subsidence rates from thrust‐belt loading outpacing sedimentation rates. It marks the onset of active deformation and the underfilled stage of the foreland basin in a distal foredeep. (3) The overlying ～7–6 Ma‐old, westerly sourced Tariquia Formation indicates a relatively high accommodation and sediment supply concomitant with the onset of deposition of Andean‐derived sediment in the medial‐foredeep depocentre on a distal fluvial megafan. Progradation of syntectonic, wedge‐shaped, westerly sourced, thickening‐ and coarsening‐upward clastics of the (4) ～6–2.1 Ma‐old Guandacay and (5) ～2.1 Ma‐to‐Recent Emborozú Formations represent the propagation of the deformation front in the present Subandean Zone, thereby indicating selective trapping of coarse sediments in the proximal foredeep and wedge‐top depocentres, respectively. Overall, the late Cenozoic stratigraphic intervals record the easterly propagation of the deformation front and foreland depocentre in response to loading and flexure by the growing Intra‐ and Subandean fold‐and‐thrust belt.     

Growth fold controls on carbonate distribution in mixed foreland basins: insights from the Amiran foreland basin (NW Zagros,Iran) and stratigraphic numerical modelling

The evolution from Late Cretaceous to early Eocene of the well dated Amiran foreland basin in the NW Iranian Zagros Mountains is studied based on the reconstruction of successive thickness, palaeobathymetry and subsidence maps. These maps show the progressive forelandwards migration of the mixed carbonate‐siliciclastic system associated with a decrease in creation of accommodation. Carbonate facies variations across the basin suggest a structural control on the carbonate distribution in the Amiran foreland basin, which has been used as initial constraint to study the control exerted by syndepositional folding in basin architecture and evolution by means of stratigraphic numerical modelling. Modelled results show that shallow bathymetries on top of growing folds enhance carbonate production and basin compartmentalization. As a consequence, coarse clastics become restricted to the internal parts of the basin and only the fine sediments can by‐pass the bathymetric highs generated by folding. Additionally, the development of extensive carbonate platforms on top of the anticlines favours the basinwards migration of the depositional system, which progrades farther with higher fold uplift rates. In this scenario, build‐ups on top of anticlines record its growth and can be used as a dating method. Extrapolation of presented modelling results into the Amiran foreland basin is in agreement with an early folding stage in the SE Lurestan area, between the Khorramabad and Kabir Kuh anticlines. This folding stage would enhance the development of carbonate platforms on top of the anticlines, the south‐westward migration of the system and eventually, the complete filling of the basin north of the Chenareh anticline at the end of the Cuisian. Incremental thickness maps are consistent with a thin (0.4–2 km) ophiolite complex in the source area of the Amiran basin.     

The Acre Basin basement (NW Brazil) and the transition from the intracratonic to retroarc foreland basin system

The understanding of the crustal transition between orogenic zones and cratonic portions in distal regions of foreland basins has received increasing attention, but the analysis is often hampered by the sedimentary cover. Despite the peculiar location of the Acre Basin, specifically between the Amazonian Craton and the sub-Andean zone, local basement studies are still scarce due to lacking seismic data and exploratory wells. Therefore, this work aims to map basement depths, estimate crustal compositions and identify the main depocenters, structures and limits of Acre Basin using an integrated analysis to understand better the region lithospheric evolution, its relationship with the Amazonian Craton and its positioning within the Andean orogeny. For that, we used well, 2D seismic reflection, airborne and ground gravity and magnetic data as well as the EMG2008. Tilt Depth estimates indicate basement depths between 500 and 7800 m and larger sedimentary thicknesses in the northern portion. Additionally, we modelled groups of potential sources between 0.1 and 22 km and Moho depths between 26 and 37 km. Compositionally, the upper crust consists dominantly of meta-sedimentary and low-grade metamorphic rocks and granites, indicating that the sub-Andean and Acre Basins share a similar basement. Thus, there are indications that the basement of the Acre Basin is essentially formed by the Sunsás province in the Amazonian Craton. However, local differences in basement depth, magnetic susceptibility and exploratory potential led to the subdivision into Divisor and Xapuri sub-basins, north and south of the Fitzcarrald Arch, respectively. Finally, it was possible to establish the limits of the Andean orogeny influence in the Acre Basin and delimit the area of the Western Amazon Foredeep installed during the Neogene.     

Evaluating foreland basin partitioning in the northern Andes using Cenozoic fill of the Floresta basin,Eastern Cordillera,Colombia

This paper addresses foreland basin fragmentation through integrated detrital zircon U–Pb geochronology, sandstone petrography, facies analysis and palaeocurrent measurements from a Mesozoic–Cenozoic clastic succession preserved in the northern Andean retroarc fold‐thrust belt. Situated along the axis of the Eastern Cordillera of Colombia, the Floresta basin first received sediment from the eastern craton (Guyana shield) in the Cretaceous–early Palaeocene and then from the western magmatic arc (Central Cordillera) starting in the mid‐Palaeocene. The upper‐crustal magmatic arc was replaced by a metamorphic basement source in the middle Eocene. This, in turn, was replaced by an upper‐crustal fold‐thrust belt source in the late Eocene which persisted until Oligocene truncation of the Cenozoic section by the eastward advancing thrust front. Sedimentary facies analysis indicates minimal changes in depositional environments from shallow marine to low‐gradient fluvial and estuarine deposits. These same environments are recorded in coeval strata across the Eastern Cordillera. Throughout the Palaeogene, palaeocurrent and sediment provenance data point to a uniform western or southwestern sediment source. These data show that the Floresta basin existed as part of a laterally extensive, unbroken foreland basin connected with the proximal western (Magdalena Valley) basin from mid‐Paleocene to late Eocene time when it was isolated by uplift of the western flank of the Eastern Cordillera. The Floresta basin was also connected with the distal eastern (Llanos) basin from the Cretaceous until its late Oligocene truncation by the advancing thrust front.     

Pennsylvanian carbonate platforms adjacent to deltaic systems in an active marine foreland basin (Escalada Fm., Cantabrian Zone,NW Spain)

The Pennsylvanian marine foreland basin of the Cantabrian Zone (NW Spain) is characterized by the unique development of kilometre‐size and hundred‐metre‐thick carbonate platforms adjacent to deltaic systems. During Moscovian time, progradational clastic wedges fed by the orogen comprised proximal alluvial conglomerates and coal‐bearing deltaic sequences to distal shelfal marine deposits associated with carbonate platforms (Escalada Fm.) and distal clay‐rich submarine slopes. A first phase of carbonate platform development (Escalada I, upper Kashirian‐lower Podolskian) reached a thickness of 400 m, nearly 50 km in width and developed a distal high‐relief margin facing a starved basin, nearly 1000‐m deep. Carbonate slope clinoforms dipped up to 30° and consisted of in situ microbial boundstone, pinching out downslope into calciturbidites, argillaceous spiculites and breccias. The second carbonate platform (Escalada II, upper Podolskian‐lower Myachkovian) developed beyond the previous platform margin, following the basinward progradation of siliciclastic deposits. Both carbonate platforms include: (1) a lower part composed of siliciclastic‐carbonate cyclothems characterized by coated‐grain and ooid grainstones; and (2) a carbonate‐dominated upper part, composed of tabular and mound‐shaped wackestone and algal‐microbial boundstone strata alternating at the decametre scale with skeletal and coated‐grain grainstone beds. Carbonate platforms initiated in distal sectors of the foreland marine shelf during transgressions, when terrigenous sediments were stored in the proximal part, and developed further during highstands of 3rd‐order sequences in a high‐subsidence context. During the falling stage and lowstand systems tracts, deltaic systems prograded across the shelf burying the carbonate platforms. Key factors involved in the development of these unique carbonate platforms in an active foreland basin are: (1) the large size of the marine shelf (approaching 200 km in width); (2) the subsidence distribution pattern across the marine shelf, decreasing from proximal shoreline to distal sectors; (3) Pennsylvanian glacio‐eustacy affecting carbonate lithofacies architecture; and (4) the environmental conditions optimal for fostering microbial and algal carbonate factories.     

Late Quaternary sedimentation and palaeohydrology in the Acre foreland basin, SW Amazonia

Our study explores the geohydraulic history of the Acre retroarc foreland basin by gathering both spatial and temporal information from the upper 400 m of sediments. We also inquire into controls on sediment accommodation space as well as on stream vs. lacustrine domination. The Acre basin is located in south-west Amazonia, proximal to the Serra do Divisor which demarcates the eastern edge of the Andean fold–thrust belt. Radiocarbon ages from a range of materials indicate that the upper 50–250 m of the Solimôes Formation accumulated during the past 50 000 years. Both surficial and drill-core sediment records show lacustrine–fluvial transitions throughout the Late Quaternary. These shifts in depositional environments are in response to episodic changes in hydrological conditions as well as to geodynamic activity, such as subsidence. Juxtaposition of lacustrine and fluvial systems in the vertical Acre basin record mimics the regional-scale trends in the modern, upper and middle Solimôes–Amazon floodplains. In the Acre basin record lacustrine successions are characterized by increasing calcium contents up-section. This is also manifested, in the upper portions of lacustrine sequences outcropping at the surface, as alternating clastic and calcareous layers. The up-section increase in carbonate content is related to increasing salinities brought about by drier hydrodynamic conditions. Desiccation cracks are typically infilled with gypsum as are cavities of fossils in bone-beds. The latter represent isolated ponds in which the original fauna died as aridity intensified and waters became increasingly saline. Modern trunk river systems in the Acre basin flow from south-west to north-east with tributaries entering from the south-west, suggesting the influence of a domino-style, basement, fault regime. Fault or, at least, fracture control on stream channels is also suggested throughout the greater Amazon basin in the orthogonal dispositions and asymmetric terrace systems of trunk rivers as well as of major tributaries.     

Magnetic polarity stratigraphy of the Neogene foreland basin deposits of Nepal

The early Miocene Dumri Formation and middle Miocene–Pliocene Siwalik Group were deposited in the Himalayan foreland basin in response to uplift and erosion in the Himalayan fold‐thrust belt. We report magnetostratigraphic data from four sections of these rocks in Nepal. Three of these sections are in the Siwalik Group in the hanging wall of the Main Frontal thrust, and one section is from the Dumri Formation in the hanging wall of the Main Boundary thrust (MBT). Thermal demagnetization experiments demonstrate that laminated siltstones yield palaeomagnetic data useful for tectonic and magnetostratigraphic studies whereas other lithofacies yield data of questionable reliability. Magnetostratigraphic data have been acquired from 297 sites within a 4200‐m‐thick section of Siwalik deposits at Surai Khola. The observed sequence of polarity zones correlates with the geomagnetic polarity time scale (GPTS) from chron C5Ar.1n to chron C2r.2n, spanning the time frame ca. 12.5–2.0 Ma. At Muksar Khola (eastern Nepal), 111 palaeomagnetic sites from a 2600‐m‐thick section of the Siwalik Group define a polarity zonation that correlates with the GPTS from chron C4Ar.2n to chron C2Br.1r, indicating an age range of ca. 10.0–3.5 Ma. At Tinau Khola, 121 sites from a 1824‐m‐thick section of the Siwalik Group are correlated to chrons C5An.1n through C4r.1n, equivalent to the time span ca. 11.8–8.1 Ma. At Swat Khola, 68 sites within a 1200‐m‐thick section of lower Miocene Dumri Formation are correlated with chrons C6n through C5Bn.2n, covering the time span ca. 19.9–15.1 Ma. Together with previous results from Khutia Khola and Bakiya Khola, these data provide the first magnetostratigraphic correlation along nearly the entire NW–SE length of Nepal. The correlation demonstrates that major lithostratigraphic boundaries in the Siwalik Group are highly diachronous, with roughly 2 Myr of variability. In turn, this suggests that the major sedimentological changes commonly inferred to reflect strengthening of the Asian monsoon are not isochronous. Sediment accumulation curves exhibit a 30–50% increase in accumulation rate in four of the five sections of the Siwalik Group, but the timing of this increase ranges systematically from ～11.1 Ma in western Nepal to ～5.3 Ma in eastern Nepal. If this increase in sediment accumulation rate is interpreted as a result of more rapid subsidence owing to thrust loading in the Himalaya, then the diachroneity of this increase suggests lateral propagation of a major thrust system, perhaps the MBT, at a rate of ca. 103 mm year^?1 across the length of Nepal.     

Chronology and tectonic controls of Late Tertiary deposition in the southwestern Tian Shan foreland, NW China

Magnetostratigraphy from the Kashi foreland basin along the southern margin of the Tian Shan in Western China defines the chronology of both sedimentation and the structural evolution of this collisional mountain belt. Eleven magnetostratigraphic sections representing ～13 km of basin strata provide a two‐ and three‐dimensional record of continuous deposition since ～18 Ma. The distinctive Xiyu conglomerate makes up the uppermost strata in eight of 11 magnetostratigraphic sections within the foreland and forms a wedge that thins southward. The basal age of the conglomerate varies from 15.5±0.5 Ma at the northernmost part of the foreland, to 8.6±0.1 Ma in the central (medial) part of the foreland and to 1.9±0.2, ～1.04 and 0.7±0.1 Ma along the southern deformation front of the foreland basin. These data indicate the Xiyu conglomerate is highly time‐transgressive and has prograded south since just after the initial uplift of the Kashi Basin Thrust (KBT) at 18.9±3.3 Ma. Southward progradation occurred at an average rate of ～3 mm year^?1 between 15.5 and 2 Ma, before accelerating to ～10 mm year^?1. Abrupt changes in sediment‐accumulation rates are observed at 16.3 and 13.5 Ma in the northern part of the foreland and are interpreted to correspond to southward stepping deformation. A subtle decrease in the sedimentation rate above the Keketamu anticline is determined at ～4.0 Ma and was synchronous with an increase in sedimentation rate further south above the Atushi Anticline. Magnetostratigraphy also dates growth strata at <4.0, 1.4±0.1 and 1.4±0.2 Ma on the southern flanks the Keketamu, Atushi and Kashi anticlines, respectively. Together, sedimentation rate changes and growth strata indicate stepped migration of deformation into the Kashi foreland at least at 16.3, 13.5, 4.0 and 1.4 Ma. Progressive reconstruction of a seismically controlled cross‐section through the foreland produces total shortening of 13–21 km and migration of the deformation front at 2.1–3.4 mm year^?1 between 19 and 13.5 Ma, 1.4–1.6 mm year^?1 between 13.5 and 4.0 Ma and 10 mm year^?1 since 4.0 Ma. Migration of deformation into the foreland generally causes (1) uplift and reworking of basin‐capping conglomerate, (2) a local decrease of accommodation space above any active structure where uplift occurs, and hence a decrease in sedimentation rate and (3) an increase in accumulation on the margins of the structure due to increased subsidence and/or ponding of sediment behind the growing folds. Since 5–6 Ma, increased sediment‐accumulation (～0.8 mm year^?1) and gravel progradation (～10 mm year^?1) rates appear linked to higher deformation rates on the Keketamu, Atushi and Kashi anticlines and increased subsidence due to loading from both the Tian Shan and Pamir ranges, and possibly a change in climate causing accelerated erosion. Whereas the rapid (～10 mm year^?1) progradation of the Xiyu conglomerate after 4.0 Ma may be promoted by global climate change, its overall progradation since 15.5 Ma is due to the progressive encroachment of deformation into the foreland.     

Characteristics of the wedge-top depozone of the southern Taiwan foreland basin system

The wedge‐top depozone in the southern Taiwan foreland basin system is confined by the topographic front of the Chaochou Fault to the east and by a submarine deformation front to the west. The Pingtung Plain, Kaoping Shelf and Kaoping Slope constitute the main body of the wedge‐top depozone. In a subaerial setting, the alluvial and fluvial sediments accumulate on top of the frontal parts of the Taiwan orogenic wedge to form the Pingtung Plain proximal to high topographic relief. In a submarine setting, fine‐grained sediments accumulate on the Kaoping Shelf and dominant mass‐wasting sediment forms the Kaoping Slope. Wedge‐top sediments are deformed into a series of west‐vergent imbricated thrusts and folds and associated piggyback basins. A major piggyback basin occurs in the Pingtung Plain. Four smaller piggyback basins appear in the shelf–slope region. Many small‐sized piggyback basins developed over ramp folds in the lower slope region. Pliocene–Quaternary deep marine to fluvial sediments about 5000 m thick have been deposited on top of the frontal orogenic wedge in southern Taiwan. Sedimentary facies shows lateral variations from extremely coarse fluvial conglomerates proximal to the topographic front (Chaochou Fault) to fine‐grained deep marine mud close to the deformation front near the base of the slope. The stratigraphic column indicates that offshore deep‐water mud is gradationally overlain by shallow marine sands and then fluvial deposits. The transverse cross‐section of the wedge‐top depozone in the southern Taiwan is a doubly tapered prism. The northern boundary of the wedge‐top depozone in southern Taiwan is placed along the southern limit of the Western Foothills where the frontal orogenic wedge progressively changes southward to a wedge‐top depozone (Pingtung Plain), reflecting ongoing southward oblique collision between the Luzon Arc and the Chinese margin. The wedge‐top depozone is bounded to the south by the continent–ocean crust boundary. The deep slope west of the Hengchun Ridge can be viewed as an infant wedge‐top depozone, showing initial mountain building and the beginning of wedge‐top depozone.     

Development of transient carbonate ramps in an evolving foreland basin

This study of Eocene carbonate succession in the Dinaric Foreland Basin of northern Dalmatia, Croatia, integrates palaeontological and sedimentological data to document a range of carbonate ramps formed intermittently during the basin tectonic development. The end‐Cretaceous basal erosional unconformity records the coupling of Adria and Eurasia crustal plates, with an antiformal uplift along their suture zone. The overlying late Ypresian carbonate ramp, spanning biozones SBZ 11–12, developed on the forebulge flank of a shallow‐marine early synclinal basin. Basal grainstone/packstone facies, dominated by encrusting foraminifers with alveolinids and miliolids, pass upwards into packstones dominated by miliolids and rotaliids with bryozoan and echinoid fragments, indicating an increased bathymetry of the retreating forebulge flank. Deposition of grainstone facies preceded an end‐Ypresian (SBZ 12/13 transition) subaerial exposure due to post‐subductional isostatic uplift. The younger, middle to late Eocene carbonate ramps (SBZ 13–19) formed episodically as perched isolated features on blind‐thrust anticlines in a bathymetrically diversified wedge‐top basin, where phases of clastic and skeletal biogenic sedimentation alternated due to disharmonic thrusting and relative sea‐level changes. Clastic sedimentation reflects anticline crest erosion and a forced‐regressive progradation of gravelly foreshore and sandy shoreface facies over heterolithic offshore‐transition and muddy offshore facies on the anticline flank. Biogenic sedimentation represents inner‐ to middle‐ramp environments, with the latter terminating bluntly in muddy offshore environment. An outer‐ramp environment, known from classic ramp models, was lacking due to bathymetric threshold. Analysis of larger benthic foraminifers (LBF), as biostratigraphic age indicators and palaeobathymetric proxies, helped distinguish systems tracts and determine their time span. A comparison of local and global sea‐level changes allowed the interplay of tectonic and eustatic forcing to be deciphered for the study area.     

Tectonic controls on the deposits of a foreland basin: an example from the Eocene Corbières–Minervois basin, France

ABSTRACT During the Eocene in the Corbières–Minervois foreland basin, southern France, there was a transition from marine carbonate to fluvial–lacustrine sedimentation. This evolution took place in six depositional sequences, the first controlled by a eustatic rise or flexural downwarping, then following under compressive tectonic conditions. The second to the fourth sequences show marine to marshy, mainly carbonate sediments with a transgressive–regressive evolution, while the last two comprise terrigenous and carbonate continental sediments. The tectonic evolution is marked by blind fault-propagation folds which deformed the basin during the Ilerdian–Cuisian. A paroxysmal compressive tectonic phase occurred at the Bartonian when the ancient blind thrusts started to emerge. A model for the evolution of the basin is presented, involving the northward propagation of structural culminations, which focused shallow water or emergent conditions, and structural lows in which deeper water sedimentation took place. The diachronous migration of these structural zones can be constrained from the high biostratigraphic resolution of the foreland basin fill.     

Tectonic controls on Cenozoic foreland basin development in the north‐eastern Andes,Colombia

In order to evaluate the relationship between thrust loading and sedimentary facies evolution, we analyse the progradation of fluvial coarse‐grained deposits in the retroarc foreland basin system of the northern Andes of Colombia. We compare the observed sedimentary facies distribution with the calculated one‐dimensional (1D) Eocene to Quaternary sediment‐accumulation rates in the Medina wedge‐top basin and with a three‐dimensional (3D) sedimentary budget based on the interpretation of ～1800 km of industry‐style seismic reflection profiles and borehole data. Age constraints are derived from a new chronostratigraphic framework based on extensive fossil palynological assemblages. The sedimentological data from the Medina Basin reveal rapid accumulation of fluvial and lacustrine sediments at rates of up to ～500 m my^?1 during the Miocene. Provenance data based on gravel petrography and paleocurrents reveal that these Miocene fluvial systems were sourced from Upper Cretaceous and Paleocene sedimentary units exposed to the west in the Eastern Cordillera. Peak sediment‐accumulation rates in the upper Carbonera Formation and the Guayabo Group occur during episodes of coarse‐grained facies progradation in the early and late Miocene proximal foredeep. We interpret this positive correlation between sediment accumulation and gravel deposition as the direct consequence of thrust activity along the Servitá–Lengupá faults. This contrasts with one class of models relating gravel progradation in more distal portions of foreland basin systems to episodes of tectonic quiescence.     

Compressional salt tectonics and synkinematic strata of the western Kuqa foreland basin,southern Tian Shan,China

The synkinematic strata of the Kuqa foreland basin record a rich history of Cenozoic reactivation of the Palaeozoic Tian Shan mountain belt. Here, we present new constraints on the history of deformation in the southern Tian Shan, based on an analysis of interactions between tectonics and sedimentation in the western Kuqa basin. We constructed six balanced cross‐sections of the basin, integrating surface geology, well data and a grid of seismic reflection profiles. These profiles show that the Qiulitage fold belt on the southern edge of the Kuqa basin developed by thin‐skinned compression salt tectonics. The structural styles have been influenced by two major factors: the nature of early‐formed diapirs and the basinward depositional limit of the Kumugeliemu salt. Several early diapirs developed in the western Kuqa basin, soon after salt deposition, which acted to localize the subsequent shortening. Where diapirs had low relief and a thick overburden they tended to tighten into salt domes 3000–7000 m in height. Conversely, where the original diapirs had higher relief and a thinner overburden they tended to evolve into salt nappes, with the northern flanks of the diapirs thrusting over their southern flanks. Salt was expelled forward, up dip along the mother salt layer, tended to accumulate at the distal pinch‐out of Kumugeliemu salt located at the Qiulitage fold belt. Furthermore, the synkinematic strata (6–8 km thick) of the Kuqa basin indicate that during the Cenozoic reactivation of the Tian Shan, shortening of the western Kuqa basin was mainly in the hinterland until the early Miocene. Then, compression spread simultaneously southwards to the Dawanqi anticline, the Qiulitage fold belt and the southernmost blind detachment fold at the end of Miocene. The western Kuqa basin has a shortening of ca. 23 km. We consider that ca. 9 km was consumed from the end of the Miocene (5.2/5.8 Ma) to the early Pleistocene (2.58 Ma) and another ca. 14 km have been absorbed since then. Thus, we obtain a ca. 3.4/2.8 mm year^?1 average shortening from 5.2/5.8 to 2.58 Ma, followed by a 60–90% increase in average shortening rate to ca. 5.4 mm year^?1 since 2.58 Ma. This suggests that the reactivation of the modern Tian Shan has been accelerating up to the present day.     

Numerical modelling of Quaternary terrace staircase formation in the Ebro foreland basin,southern Pyrenees,NE Iberia

The southern foreland basin of the Pyrenees (Ebro basin) is an exorheic drainage basin since Late Miocene times. Remnants of an early exorheic Ebro drainage system are not preserved, but morphology provides evidence for the Pliocene–Quaternary drainage development. The incision history of the Ebro system is denoted by (i) extensive, low gradient pedimentation surfaces which are associated with the denudation of the southern Pyrenean piedmont around the Pliocene–Quaternary transition and (ii) deeply entrenched Quaternary river valleys. Presumably since the Middle Pleistocene fluvial incision intensified involving the formation of extensive terrace staircase in the Ebro basin. Terrace exposure dating in major Ebro tributary rivers indicates climate‐triggered terrace formation in response to glacial–interglacial climate and glacier fluctuations in the Pyrenean headwaters. The overall (semi)parallel longitudinal terrace profiles argue for progressive base level lowering for the whole Ebro drainage network. The landscape evolution model, TISC, is used to evaluate climatic, tectonic and base level scenarios for terrace staircase formation in the Ebro drainage system. Model simulations are compared with morpho‐climatic, tectonic and chronologic data. Results show that climatic fluctuations cause terrace formation, but the incision magnitudes and convergent terrace profiles predicted by this climate model scenario are not consistent with the (semi)parallel terraces in the Ebro basin. A model including previous (late Pliocene) uplift of the lower Ebro basin results in rapid base‐level lowering and erosion along the drainage network, small late stage incision magnitudes and terrace convergence, which are not in agreement with observations. Instead, continuous Quaternary uplift of both the Pyrenees and the Ebro foreland basin triggers (semi)parallel terrace staircase formation in southern Pyrenean tributary rivers in consistency with the observed longitudinal terrace profiles and Middle–Late Pleistocene incision magnitudes. Forward model simulations indicate that the present Ebro drainage system is actively incising, providing further evidence for uplift.     

Sedimentation in a foreland basin within synorogenic orocline: Palaeogene of the Isparta Bend,Taurides, SW Turkey

The Palaeogene Isparta Basin of southwestern Anatolia formed between two convergent arms of the Isparta Bend orocline of the Tauride orogen. The origin of this tightening orocline is hypothetically explained in plate‐tectonic terms. Basin sedimentation commenced on a down‐warped Mesozoic carbonate platform of a crustal block accreted at the end of Cretaceous to the southern margin of the Anatolian plate. The basin earliest deposits are Palaeocene reddish mudstones with a fossil‐barren condensed basal part and increasingly interspersed with thin calcarenitic turbidites towards the top. The supply of turbiditic sediment to the basin plain subsequently increased, as the upper‐bathyal basin plain became surrounded from both sides by a narrow littoral shelf with an advancing turbiditic slope ramp. A major forced regression occurred at the end of Bartonian, causing incision of subaerial to submarine valleys up 600 m deep, filled in with gravelly to sandy turbidites and debrisflow deposits during the subsequent rise of relative sea level. The half‐filled valleys were re‐incised due to a Rupelian forced regression and were fully filled with fluvio‐deltaic bayhead deposits during a final marine transgression that re‐established the basin‐margin biocalcarenitic shelf. The littoral environment then expanded across the shallowing basin, as the basin axial zone was up‐domed and eroded to bedrock level at the end of Oligocene and the basin was tectonically inverted in Miocene. The pattern of intra‐orocline foreland sedimentation documented by this case study provides tentative criteria for the recognition of synorogenic oroclines and for their distinction from post‐orogenic oroclines.     

Evolution of a transfer-related basin: the Ardea basin (Latium, central Italy)

During the Messinian—Pleistocene, the Peninsular Tyrrhenian margin underwent a NE—SW orientated stretching regime, with the formation of a NW—SE normal fault system and basins which are linked by NE—SW transfer fault zones. These fault zones border narrow and deep asymmetric basins. This paper uses geological and geophysical analysis (structural and stratigraphical data, seismic lines and anisotropy of magnetic susceptibility (AMS) data) to look at the evolution of one of these transfer-related basins, located south of Rome (Ardea basin). Comparison with other similar features indicates that the common characteristics of these transfer structures are: (i) the slip vector along the transfer fault is mostly dip-slip, which means that the local extensional direction is orthogonal to the regional extensional direction; (ii) development of a narrow and deep half-graben basin.