Polarization of radiation from a strongly magnetized accretion disk: The asymptotic spectral distribution

We calculate the polarization of the radiation from an optically thick accretion disk with a vertical averaged magnetic field. The polarization arises from the scattering of light by free electrons in a magnetized disk plasma. The Faraday rotation of the polarization plane during the propagation of a photon in a medium with a magnetic field is considered as the main effect. We discuss various models of optically thick accretion disks with a vertical averaged magnetic field. Our main goal is to derive simple asymptotic formulas for the polarization of radiation in the case where the Faraday rotation angle Ψ ≫ 1 at the Thomson optical depth τ = 1. The results of our calculations allow the magnetic field strength in the region of the marginally stable orbit near a black hole to be estimated from polarimetric observations, including X-ray observations expected in the future. Since the polarization spectrum of the radiation strongly depends on the accretion disk model, a realistic physical model of the accretion disk can be determined from data on the polarization of its radiation.     

Topology of magnetic field and polarization in accretion discs of AGN

In this paper we demonstrate that the wavelength dependence of polarization degree and position angle allows us to derive the distribution of magnetic field in accretion disc. The polarized radiation arises due to scattering of emission light by electrons in a magnetized optically thick accretion disc. Faraday rotation of polarization plane is taken into consideration. Through wavelength dependence of polarization it is possible to derive the value of the magnetic Prandtl number in the accretion disc plasma. The power law index of the polarization wavelength dependence is related with the radial distribution of magnetic field in an accretion disc. This allows us to test the various models of an accretion disc around the central black hole.     

Constraints on black hole spins with a general relativistic accretion disk corona model

The peaks in the spectra of the accretion disks surrounding massive black holes in quasars are in the far-UV or soft X-ray band, which are usually not observed. However, in the disk corona model, soft photons from the disk are Comptonized to high energy in the hot corona, and the hard X-ray spectra(luminosity and spectral shape) contain information on the incident spectra from the disk. The values of black hole spin parameter a*are inferred from the spectral fitting, which are spread over a large range, ~-0.94 to 0.998. We find that the inclination angles and mass accretion rates are well determined by the spectral fitting, but the results are sensitive to the accuracy of black hole mass estimates. No tight constraints on the black hole spins are achieved, if the uncertainties in black hole mass measurements are a factor of four,which are typical for the single-epoch reverberation mapping method. Recently, the accuracy of black hole mass measurement has been significantly improved to 0.2- 0.4 dex with the velocity resolved reverberation mapping method. The black hole spin can be well constrained if the mass measurement accuracy is50%. In the accretion disk corona scenario, a fraction of power dissipated in the disk is transported into the corona, and therefore the accretion disk is thinner than a bare disk for the same mass accretion rate,because the radiation pressure in the disk is reduced. We find that the thin disk approximation, H/R0.1,is still valid if 0.3 m 0.5, provided half of the dissipated power is radiated in the corona above the disk.     

Physics of the primitive solar accretion disk

The theory of viscous accretion disks developed by Lynden-Bell and Pringle has been applied to the evolution of the primitive solar nebula. The additional physical input needed to determine the structure of the disk is described. A series of calculations was carried out using a steady flow approximation to explore the effects on the disk properties of variations in such parameters as the angular momentum and accretion rate of the infalling material from a collapsing interstellar cloud fragment. The more detailed evolutionary calculations involved five cases with various combinations of parameters. It was concluded that the late stages of evolution of the disks would be dominated by the effects of mass loss from the expansion of a hot disk corona into space, and the effects of this were included in the evolutionary calculations. A new theory of comet formation is formulated upon these results. The most important result is the conclusion, which appears to be inescapable, that the primitive solar accretion disk was repeatedly unstable against axisymmetric perturbations, in which rings would form and collapse upon themselves, with the subsequent formation of giant gaseous protoplanets.     

Spectropolarimetric observations of active galactic nuclei with the 6-m BTA telescope

We present the results of our spectropolarimetric observations for a number of active galactic nuclei (AGNs) carried out at the 6-m telescope with the SCORPIO focal reducer. The derived wavelength dependences of the polarization have been analyzed by taking into account the Faraday rotation of the polarization plane on the photon mean free path in a magnetized accretion disk. As a result, based on traditional accretion disk models, we have determined the magnetic field strength and distribution and a number of physical parameters of the accreting plasma in the region where the optical radiation is generated.     

On disk accretion

A simple but sufficiently accurate method for calculating an accretion disk structure is developed. The detailed analysis of the accretion disk is fulfilled by using this method. The effect of turbulent heat transfer on the disk structure is taken into account along with the effect of radiative transfer. The turbulent heat transfer is shown to play an important role, and may be even predominant in the inner disk region. The dependence of temperatureT and density on thez-coordinate is found. Simple analytic expressions are proposed for the run of the density in all the disk zones. It is shown that the inner disk region is convectively stable. The main parameters of all the zones are derived. The geometry of regular motions is studied; the regular hydrodynamical flows are found to appear directed both toward and outside the central object. A detailed comparison is made with the results of other authors.     

On the torque exerted by a warped,magnetically threaded accretion disk

Most astrophysical accretion disks are likely to be warped.In X-ray binaries,the spin evolution of an accreting neutron star is critically dependent on the interaction between the neutron star magnetic field and the accretion disk.There have been extensive investigations on the accretion torque exerted by a coplanar disk that is magnetically threaded by the magnetic field lines from the neutron stars,but relevant works on warped/tilted accretion disks are still lacking.In this paper we develop a simplified twocomponent model,in which the disk is comprised of an inner coplanar part and an outer,tilted part.Based on standard assumption on the formation and evolution of the toroidal magnetic field component,we derive the dimensionless torque and show that a warped/titled disk is more likely to spin up the neutron star compared with a coplanar disk.We also discuss the possible influence of various initial parameters on the torque.     

Mapping the shape of the accretion disk of Hercules X‐1

Hercules X‐1 is an x‐ray binary with a 1.7 day orbit and which exhibits a regular 35‐day intensity cycle, which comes in two types: 0.2 orbital phase turn‐on and 0.7 phase turn‐on. The cycle is well measured by the RXTE/ASM and is caused by a sequence of occultations by the inner and outer edges of the accretion disk. In addition to the 35‐day x‐ray cycle, the accretion disk shadows the companion star HZ Her to give the regular and well known optical modulation, and gives a modulation of the EUV emission from the system. The x‐ray modulation is most precisely measured and best for determination of the disk shape. Here disk and emission region models are used to derived the disk shape from the 0.2 turn‐on cycles and compared to a previous derivation based on 0.7 turn‐on cycles. (© 2004 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Numerical simulations of dissipationless disk accretion

Our goal is to study the regime of disk accretion in which almost all of the angular momentum and energy is carried away by the wind outflowing from the disk in numerical experiments. For this type of accretion the kinetic energy flux in the outflowing wind can exceed considerably the bolometric luminosity of the accretion disk, what is observed in the plasma flow from galactic nuclei in a number of cases. In this paper we consider the nonrelativistic case of an outflow from a cold Keplerian disk. All of the conclusions derived previously for such a system in the self-similar approximation are shown to be correct. The numerical results agree well with the analytical predictions. The inclination angle of the magnetic field lines in the disk is less than 60°, which ensures a free wind outflow from the disk, while the energy flux per wind particle is greater than the particle rotation energy in its Keplerian orbit by several orders of magnitude, provided that the ratio r _A/r ? 1, where r _A is the Alfvénic radius and r is the radius of the Keplerian orbit. In this case, the particle kinetic energy reaches half the maximum possible energy in the simulation region. The magnetic field collimates the outflowing wind near the rotation axis and decollimates appreciably the wind outflowing from the outer disk periphery.     

A supercritical accretion disk model for SS 433

We describe a model for SS 433 based on an accretion disk around a black hole. Due to the very high mass transfer rate in the system, the disk must be geometrically thick. Two narrow funnels are formed around the rotation axis and radiation pressure in the funnels accelerates matter to relativistic velocities in the form of two opposite jets. TheX and optical luminosities are evaluated and they agree well with the experimental data.     

Structure of the satellitary accretion disk of Saturn

A detailed computation on the equilibrium structure of an accretion disk around Saturn from which the regular satellites presumably originated is reported. Such a disk is the predecessor of the self-dissipating disk that is formed when the mass infall stops (Cassen and Moosman, 1981, Icarus48, 353–376). When determining the disk structure local energy balance was assumed. Convention was taken into account by introducing local energy dissipation and, in an approximate manner, sonic convection. Changes in the disk structure were investigated by varying the free parameters, i.e., the external flux from both the protosun and the protoplanet, the abundance of dust and the strength of turbulence. It has been verified that the external energy flux does not play an important role in the evolution of the disk structure. Models characterized by either longer times (?3 10³ year) or a noticeable depletion of condensable elements (10^?2 times less than the solar value) have a total mass of the order of 0.34?0.1 times the mass of the regular satellites increased by the mass of the light elements. Low turbulence models (Reynolds critical number $\text{Re}{}^1\text{= 150}$) are characterized approximately by a total mass twice as large the mass of the regular satellites. All the studied models present a temperature distribution that allows the condensation of iron, silicate, and, in the outer regions, ice grains. All models but the one with 10^?2 of the solar value of condensable elements are characterized by a wide convective region that contains the formation zone of the regular satellites.     

The local stability of accretion disk models with considering the role of various viscosity and cooling mechanisms

The standard thin accretion disk model can explain the soft X-ray spectra of Galactic black hole systems and AGN successfully. However, there are still a few observational documents for Radiation pressure theory in X-ray novae in black hole binary systems and AGN. The luminosity in accretion onto black holes is corresponds to L>0.01L _E . According to standard thin disk model, when the accretion rate is over a small fraction of the Eddington rate, L>0.01L _E , the inner region of the disk is radiation-pressure-dominated and thermally unstable. However, observations of the high/soft state of black hole X-ray binaries with luminosity within (0.01L _E <L<0.5L _E ) show that the disk is quite stable. Thus, this contradiction shows the objection of this model and maybe it is essential to change the standard viscosity law or one of the other basic assumptions in order to get a stable disk models. In this paper, we revisit and recalculate the thermal instability with a different models of viscosity and cooling functions and show that the choosing of an arbitrary cooling and viscosity functions can affect on the stability of a general disk model and hence maybe answer to a this problem in accretion disk theory. We choose an arbitrary functions of surface density Σ and half thickness of disk H for cooling and viscosity. Also, we discuss a general disk with thermal conduction, radial force and advection. Then, we solve the equations numerically. We obtain a fourth degree dispersions relation and discuss solutions and instability modes. This analysis shows the great sensitivity of stability of disk to the form of viscosity, so there are various effective factors to stabilize the disk. For example the exist of advection and thermal conduction can effect to stability of disks also.     

The relative orientation of the accretion disk and host galaxy disk in Seyferts

We present the results of the study of the orientation of the accretion disk relative to the host galaxy disk in Seyfert galaxies. We used a sample selected by a mostly isotropic property, the flux at 60 μm, with radio and optical data homogeneously observed and analyzed, to avoid selection effects. We found that the observed i and δ values, galaxy inclination and difference between the position angle of the jet and the galaxy major axis, respectively, are consistent with a random β-distribution, the angle between the jet and the galaxy plane axis. We also found that the previously suggested Zone of Avoidance disappears and was probably due to a selection effect. We suggest several explanations for the misalignment of the accretion disk relative to the galaxy disk.     

Linkage between accretion disks and blazars

The magnetic field in an accretion disk is estimated assuming that all of the angular momentum within prescribed accretion disk radii is removed by a jet. The magnetic field estimated at the base of the jet is extrapolated to the blazar emission region using a model for a relativistic axisymmetric jet combined with some simplifying assumptions based on the relativistic nature of the flow. The extrapolated magnetic field is compared with estimates based upon the synchrotron and inverse Compton emission from three blazars, MKN 501, MKN 421 and PKS 2155-304. The magnetic fields evaluated from pure synchrotron self-Compton models are inconsistent with the magnetic fields extrapolated in this way. However, in two cases inverse Compton models in which a substantial part of the soft photon field is generated locally agree well, mainly because these models imply magnetic field strengths consistent with an important Poynting Flux component. This comparison is based on estimating the mass accretion rate from the jet energy flux. Further comparisons along these lines will be facilitated by independent estimates of the mass accretion rate in blazars and by more detailed models for jet propagation near the black hole.     

Unipolar induction of a magnetized accretion disk around a black hole

The structure and magnitude of the electromagnetic field produced by a rotating accretion disk around a black hole were determined. The disk matter is assumed to be a magnetized plasma with a frozenin poloidal magnetic field. The vacuum approximation is used outside the disk.     

Formation of the prelunar accretion disk

According to the single-impact hypothesis for forming the Moon, the angular momentum needed for the present Earth-Moon system can be imparted to the proto-Earth by a collision with a body having one-tenth of the mass or more. The collision must vaporize a large amount of rock which must stay in the form of vapor after expanding in density by a factor of several, so that pressure gradients can accelerate significant amounts of the matter into orbital motion about the proto-Earth. A successful theory must put considerably more than a lunar mass into orbit, having considerably more angular momentum than is needed to assemble a lunar mass in orbit at 3 Earth radii. Such a collision has been simulated by a particular form of a particle-in-cell representation of hydrodynamics and 78 cases have been run representing variations in a variety of parameters. A significant fraction of the cases were successful in creating a satisfactory prelunar accretion disk. A fairly common characteristic of these cases was the presence of an excess velocity in the collision (above that of a parabolic orbit), implying that the projectile involved in the collision existed in an Earth-crossing orbit of significant ellipticity. A majority of the mass of the prelunar accretion disk is contributed by the projectile.     

The connection of standard thin disk with advection-dominated accretion flow

Using the standard Runge-Kutta method, a global solution of the basic equations describing black hole accretion flows is derived. It is proved that transition from a standard thin disk to an advection-dominated accretion flow is realizable in case of high viscosity, without introducing any additional mechanism of energy transfer or specifying any ad hoc outer boundary condition.