Post-wildfire sediment cascades: A modeling framework linking debris flow generation and network-scale sediment routing

Wildfires represent one of the largest disturbances in watersheds of the Intermountain West. Yet, we lack models capable of predicting post-wildfire impacts on downstream ecosystems and infrastructure. Here we present a novel modeling framework that links new and existing models to simulate the post-wildfire sediment cascade, including spatially explicit predictions of debris flows, storage of debris flow sediment within valleys, delivery of debris flow sediment to active channels, and the downstream routing of sediment through river networks. We apply the model to sediment dynamics in Clear Creek watershed following the 2010 Twitchell Canyon Fire in the Tushar Mountains of southern Utah. The debris flow generation model performed well, correctly predicting 19 out of 20 debris flows from the largest catchments, with only four false positives and two false negatives at observed rainfall intensities. In total, the model predicts the occurrence of 160 post-wildfire debris flows across the Clear Creek watershed, generating more than 650 000 m³ of sediment. Our new storage and delivery model predicts the vast majority of this sediment is stored within valleys, and only 13% is delivered to the river network. The sediment routing model identifies numerous sediment bottlenecks within the network, which alter transport dynamics and may be hotspots for aggradation and aquatic habitat alteration. The volume of sediment exported from the watershed after seven years of simulation totals 17% of that delivered, or 2% of the total generated debris flow sediment. In the case of the Twitchell Canyon Fire, this highlights that significant post-wildfire sediment volumes can be stored in valleys (87%) and within the stream network (11%). Finally, we discuss useful insights that can be gleaned from the model framework, as well as the limitations and need for more monitoring and theory development in order to better constrain essential inputs, process rates, and morphodynamics. © 2019 John Wiley & Sons, Ltd.     

Bed scour by debris flows: experimental investigation of effects of debris‐flow composition

Debris flows can grow greatly in size by entrainment of bed material, enhancing their runout and hazardous impact. Here, we experimentally investigate the effects of debris‐flow composition on the amount and spatial patterns of bed scour and erosion downstream of a fixed to erodible bed transition. The experimental debris flows were observed to entrain bed particles both grain by grain and en masse, and the majority of entrainment was observed to occur during passage of the flow front. The spatial bed scour patterns are highly variable, but large‐scale patterns are largely similar over 22.5–35° channel slopes for debris flows of similar composition. Scour depth is generally largest slightly downstream of the fixed to erodible bed transition, except for clay‐rich debris flows, which cause a relatively uniform scour pattern. The spatial variability in the scour depth decreases with increasing water, gravel (= grain size) and clay fraction. Basal scour depth increases with channel slope, flow velocity, flow depth, discharge and shear stress in our experiments, whereas there is no correlation with grain collisional stress. The strongest correlation is between basal scour and shear stress and discharge. There are substantial differences in the scour caused by different types of debris flows. In general, mean and maximum scour depths become larger with increasing water fraction and grain size, and decrease with increasing clay content. However, the erodibility of coarse‐grained experimental debris flows (gravel fraction = 0.64) is similar on a wide range of channel slopes, flow depths, flow velocities, discharges and shear stresses. This probably relates to the relatively large influence of grain‐collisional stress to the total bed stress in these flows (30–50%). The relative effect of grain‐collisional stress is low in the other experimental debris flows (<5%), causing erosion to be largely controlled by basal shear stress. Copyright © 2016 John Wiley & Sons, Ltd.     

A depth‐averaged two‐phase model for debris flows over erodible beds

Mass exchange between debris flow and the bed plays a vital role in debris flow dynamics. Here a depth‐averaged two‐phase model is proposed for debris flows over erodible beds. Compared to previous depth‐averaged two‐phase models, the present model features a physical step forward by explicitly incorporating the mass exchange between the flow and the bed. A widely used closure model in fluvial hydraulics is employed to estimate the mass exchange between the debris flow and the bed, and an existing relationship for bed entrainment rate is introduced for comparison. Also, two distinct closure models for the bed shear stresses are evaluated. One uses the Coulomb friction law and Manning's equation to determine the solid and fluid resistances respectively, while the other employs an analytically derived formula for the solid phase and the mixing length approach for the fluid phase. A well‐balanced numerical algorithm is applied to solve the governing equations of the model. The present model is first shown to reproduce average sediment concentrations in steady and uniform debris flows over saturated bed as compared to an existing formula underpinned by experimental datasets. Then, it is demonstrated to perform rather well as compared to the full set of USGS large‐scale experimental debris flows over erodible beds, in producing debris flow depth, front location and bed deformation. The effects of initial conditions on debris flow mass and momentum gain are resolved by the present model, which explicitly demonstrates the roles of the wetness, porosity and volume of bed sediments in affecting the flow. By virtue of extended modeling cases, the present model produces debris flow efficiency that, as revealed by existing observations and empirical relations, increases with initial volume, which is enhanced by mass gain from the bed. Copyright © 2017 John Wiley & Sons, Ltd.     

Controls on debris-flow initiation on burned and unburned hillslopes during an exceptional rainstorm in southern New Mexico,USA

AbstractUsing observations from 688 debris flows, we analyse the hydrologic and landscape characteristics that influenced debris-flow initiation mechanisms and locations in a watershed that had been partially burned by the 2012 Whitewater-Baldy Complex Fire in the Gila Mountains, southern New Mexico. Debris flows can initiate due to different processes. Slopes can fail as discrete landslides and then become fluidized and move downstream as debris flows (landslide initiated) or progressive bulking of sediment from a distributed area can become channelized and concentrated as it moves downslope (runoff generated). In this study, we have an unusual opportunity to investigate both types of debris-flow initiation mechanisms in our observations of debris flows, triggered by an exceptional rainstorm in the autumn of 2013. Additionally, we compare our observations with those of a dataset of 1138 debris flows in the Colorado Front Range, triggered during the same weather system. We found that runoff-generated debris flows dominated in burn areas, and runoff required to start these flows could be well characterized by the Shields stress. Landslide-initiated debris flows were dominant in unburned areas. Debris-flow densities were tied to total rainfall and precipitation intensities. Like the observations in the Colorado Front Range, debris-flow initiation locations were found primarily in areas of relatively sparse vegetation on south-facing slopes between 25 and 40°, and with upslope contributing areas less than 1000 m². In terms of preferential locations for debris-flow initiations, 2013 vegetation coverage, approximated by Green–Red Vegetation Index metrics, proved to be more influential than the 2012 burn-severity designation. The uniformity of observations between our study area and those in the Colorado Front Range indicate that the underlying hydrologic and landscape patterns of the debris-flow initiation locations documented in these studies could be applicable to the wider southwest and Rocky Mountain regions. © 2019 John Wiley & Sons, Ltd.     

Debris avalanches and debris flows transformed from collapses in the Trans-Mexican Volcanic Belt, Mexico – behavior, and implications for hazard assessment

Volcanoes of the Trans-Mexican Volcanic Belt (TMVB) have yielded numerous sector and flank collapses during Pleistocene and Holocene times. Sector collapses associated with magmatic activity have yielded debris avalanches with generally limited runout extent (e.g. Popocatépetl, Jocotitlán, and Colima volcanoes). In contrast, flank collapses (smaller failures not involving the volcano summit), both associated and unassociated with magmatic activity and correlating with intense hydrothermal alteration in ice-capped volcanoes, commonly have yielded highly mobile cohesive debris flows (e.g. Pico de Orizaba and Nevado de Toluca volcanoes). Collapse orientation in the TMVB is preferentially to the south and northeast, probably reflecting the tectonic regime of active E–W and NNW faults. The differing mobilities of the flows transformed from collapses have important implications for hazard assessment. Both sector and flank collapse can yield highly mobile debris flows, but this transformation is more common in the cases of the smaller failures. High mobility is related to factors such as water content and clay content of the failed material, the paleotopography, and the extent of entrainment of sediment during flow (bulking). The ratio of fall height to runout distance commonly used for hazard zonation of debris avalanches is not valid for debris flows, which are more effectively modeled with the relation inundated area to failure or flow volume coupled with the topography of the inundated area.     

Geomorphological characteristics of small debris flows on Junior's Kop,Marion Island,maritime sub ‐ Antarctic

The geomorphological characteristics of small debris flows in a maritime sub‐Antarctic environment are described. The morphological and sedimentological characteristics of the debris flows are comparable to debris flows documented for other parts of the world; their initiation appears closely linked to the unusual environment in which they are found. Sediment supply is generated by diurnal frost heave of loamy sediment associated with Azorella selago. The debris flows are triggered by sediment mobilization upon saturation of the frost‐heaved surface gravel and overland flow over the low‐permeability and frost‐susceptible slope materials. Morphological effects of the flows are short‐lived due to obliteration by subsequent frost heave activity. Copyright © 2000 John Wiley & Sons, Ltd.     

Infiltration and runoff generation processes in fire‐affected soils

Post‐wildfire runoff was investigated by combining field measurements and modelling of infiltration into fire‐affected soils to predict time‐to‐start of runoff and peak runoff rate at the plot scale (1 m²). Time series of soil‐water content, rainfall and runoff were measured on a hillslope burned by the 2010 Fourmile Canyon Fire west of Boulder, Colorado during cyclonic and convective rainstorms in the spring and summer of 2011. Some of the field measurements and measured soil physical properties were used to calibrate a one‐dimensional post‐wildfire numerical model, which was then used as a ‘virtual instrument’ to provide estimates of the saturated hydraulic conductivity and high‐resolution (1 mm) estimates of the soil‐water profile and water fluxes within the unsaturated zone. Field and model estimates of the wetting‐front depth indicated that post‐wildfire infiltration was on average confined to shallow depths less than 30 mm. Model estimates of the effective saturated hydraulic conductivity, K_s, near the soil surface ranged from 0.1 to 5.2 mm h^?1. Because of the relatively small values of K_s, the time‐to‐start of runoff (measured from the start of rainfall), t_p, was found to depend only on the initial soil‐water saturation deficit (predicted by the model) and a measured characteristic of the rainfall profile (referred to as the average rainfall acceleration, equal to the initial rate of change in rainfall intensity). An analytical model was developed from the combined results and explained 92–97% of the variance of t_p, and the numerical infiltration model explained 74–91% of the variance of the peak runoff rates. These results are from one burned site, but they strongly suggest that t_p in fire‐affected soils (which often have low values of K_s) is probably controlled more by the storm profile and the initial soil‐water saturation deficit than by soil hydraulic properties. Published 2013. This article is a U.S. Government work and is in the public domain in the USA.     

Impacts of successive wildfire on soil hydraulic properties: Implications for debris flow hazards and system resilience

Climate and land use changes have led to recent increases in fire size, severity, and/or frequency in many different geographic regions and ecozones. Most post-wildfire geomorphology studies focus on the impact of a single wildfire but changing wildfire regimes underscore the need to quantify the effects of repeated disturbance by wildfire and the subsequent impacts on system resilience. Here, we examine the impact of two successive wildfires on soil hydraulic properties and debris flow hazards. The 2004 Nuttall-Gibson Complex and the 2017 Frye Fire affected large portions of the Pinaleño Mountains in southern Arizona, creating a mosaic of burn severity patterns that allowed us to quantify differences in wildfire-induced hydrologic changes as a function of burn severity and recent fire history (i.e. burned in only the Frye Fire or burned in both fires). Field observations after the 2017 Frye Fire indicated debris flow activity in areas burned predominantly at low severity. Many of these areas, however, were also affected by the 2004 Nuttall-Gibson Complex, suggesting that the relatively short recovery time between the two wildfires may have played a role in the geomorphic response to the most recent wildfire. Field measurements of soil hydraulic properties suggest that soils burned at moderate severity in 2004 and low severity in 2017 have a lower infiltration capacity relative to those that remained unburned in 2004 and burned at low severity in 2017. Simulations of runoff demonstrate that measured differences in infiltration capacity between once- and twice-burned soils are sufficient in some cases to influence the rainfall intensities needed to initiate runoff generated debris flows. Results quantify the impact of wildfire history and burn severity on runoff and debris flow activity in a landscape affected by successive wildfires and provide insight into how the resilience of geomorphic systems may be affected by successive wildfires. © 2019 John Wiley & Sons, Ltd.     

Predicting post-fire debris flow grain sizes and depositional volumes in the Intermountain West,United States

Post-fire debris flows represent one of the most erosive consequences associated with increasing wildfire severity and investigations into their downstream impacts have been limited. Recent advances have linked existing hydrogeomorphic models to predict potential impacts of post-fire erosion at watershed scales on downstream water resources. Here we address two key limitations in current models: (1) accurate predictions of post-fire debris flow volumes in the absence of triggering storm rainfall intensities and (2) understanding controls on grain sizes produced by post-fire debris flows. We compiled and analysed a novel dataset of depositional volumes and grain size distributions (GSDs) for 59 post-fire debris flows across the Intermountain West (IMW) collected via fieldwork and from the literature. We first evaluated the utility of existing models for post-fire debris flow volume prediction, which were largely developed for Southern California. We then constructed a new post-fire debris flow volume prediction model for the IMW using a combination of Random Forest modelling and regression analysis. We found topography and burn severity to be important variables, and that the percentage of pre-fire soil organic matter was an essential predictor variable. Our model was also capable of predicting debris flow volumes without data for the triggering storm, suggesting that rainfall may be more important as a presence/absence predictor, rather than a scaling variable. We also constructed the first models that predict the median, 16th percentile, and 84th percentile grain sizes, as well as boulder size, produced by post-fire debris flows. These models demonstrate consistent landscape controls on debris flow GSDs that are related to land cover, physical and chemical weathering, and hillslope sediment transport processes. This work advances our ability to predict how post-fire sediment pulses are transported through watersheds. Our models allow for improved pre- and post-fire risk assessments across diverse ranges of watersheds in the IMW.     

Post‐wildfire changes in suspended sediment rating curves: Sabino Canyon,Arizona

Wildfire has been shown to increase erosion by several orders of magnitude, but knowledge regarding short‐term variations in post‐fire sediment transport processes has been lacking. We present a detailed analysis of the immediate post‐fire sediment dynamics in a semi‐arid basin in the southwestern USA based on suspended sediment rating curves. During June and July 2003, the Aspen Fire in the Coronado National Forest of southern Arizona burned an area of 343 km². Surface water samples were collected in an affected watershed using an event‐based sampling strategy. Sediment rating parameters were determined for individual storm events during the first 18 months after the fire. The highest sediment concentrations were observed immediately after the fire. Through the two subsequent monsoon seasons there was a progressive change in rating parameters related to the preferential removal of fine to coarse sediment. During the corresponding winter seasons, there was a lower supply of sediment from the hillslopes, resulting in a time‐invariant set of sediment rating parameters. A sediment mass‐balance model corroborated the physical interpretations. The temporal variability in the sediment rating parameters demonstrates the importance of storm‐based sampling in areas with intense monsoon activity to characterize post‐fire sediment transport accurately. In particular, recovery of rating parameters depends on the number of high‐intensity rainstorms. These findings can be used to constrain rapid assessment fire‐response models for planning mitigation activities. Copyright © 2006 John Wiley & Sons, Ltd.     

Inundation and flow properties of a runoff-generated debris flow following successive high-severity wildfires in northern Arizona,USA

Burned slopes are susceptible to runoff-generated debris flows in the years following wildfire due to reductions in vegetation cover and soil infiltration capacity. Debris flows can pose serious threats to downstream communities, so quantifying variations in flow properties along debris-flow runout paths is needed to improve both conceptual and quantitative models of debris-flow behaviour to help anticipate and mitigate the risk associated with these events. Changes in flow properties along the runout paths of the runoff-generated debris flows that follow fire may be particularly dramatic, since they initiate when a water-dominated flow rapidly entrains sediment and later transition back to a water-dominated flow once they reach greater drainage areas and lower slopes. Here, we study the properties of a debris flow that initiated 1 month following the 2022 Pipeline Fire in northern Arizona, USA. We categorized flow type into two classes, granular debris flow and muddy debris flow, along the 7-km runout path and examined how flow properties varied between the phases. Changes in channel gradient and confinement likely facilitated the transition between the flow phases, which were characterized by significant differences in maximum clast size, but similar clay content and fine fractions. We also found that the volume and runout distance of the debris flow were 28 and six times greater, respectively, than that of a debris flow that initiated in the same watershed following a fire 12 years earlier. We attribute these differences to the combined effects of two high-severity fires, suggesting that consideration of recent fire history could improve post-fire debris-flow hazard assessments. Results of this study provide quantitative constraints on changes in post-fire debris-flow properties along a runout path. Data collected in this study add to a small number of debris-flow inundation datasets that can be used to test runout models in post-fire settings.     

Erosion and deposition by debris flows at Mt Thomas,North Canterbury,New Zealand

The grass-covered slopes on the southern flank of Mt Thomas, an upfaulted block of highly sheared sandstone and argillite 40 km NW of Christchurch, New Zealand, are presently undergoing severe erosion by a combination of mass-wasting processes. Gully erosion, soil slips, and debris flows have carved out a number of steep, deeply incised ravines, from which coarse debris is transported (primarily by debris flows) to alluvial fans below. Geologic and historical evidence indicates that debris flows have been episodically active here for at least the last 20,000 years and have been the dominant process in fan building. This demonstrates that catastrophic geomorphic processes, rather than processes acting at relatively uniform rates, can be dominant in humid-temperate areas as well as in arid and semi-arid regions. In April 1978, debris flows were triggered in one of two unstable ravines in the Bullock Creek catchment by a moderate intensity, long duration rainstorm with a return period in excess of 20 years. Surges of fluid debris, moving at velocities up to 5 m/s, transported a dense slurry of gravel, sand, and mud up to 3·5 km over a vertical fall of 600 m. Deposition on the alluvial fan occurred when the flows left the confines of an entrenched fan-head channel and spread out as a 0·16 km² sheet averaging 1·2 m thick. In all, 195,000 m³ were deposited, roughly a third of that being reworked sediments from the head of the fan. Sediment yield from this one event would be equivalent to several thousand years worth of erosion at average sediment discharge rates for small South Island mountain catchments. Samples of viscous fluid debris during surges contained up to 84 per cent solids, composed of 70 per cent gravel, 20 per cent silt, and 4 per cent clay. Fluid density of the material ranged between 1·95 and 2·13 g/cm³, and it was extremely poorly sorted. Between surges the fluid was less viscous, less dense, and unable to carry gravel in suspension. Severe fan-head entrenchment of the stream channel (approximately 10 m in less than 24 hours) was accomplished by the erosive action of the surges. Tectonic uplift of the Mt Thomas block and the weak, crushed condition of the bedrock appear to be ultimately responsible for the catastropic erosion of slopes in the Bullock Creek catchment. However, forest clearing within the last few centuries appears to have greatly increased the rate of mass wasting and gully erosion on these slopes.     

Human‐induced hazardous debris flows in Carrara marble basins (Tuscany,Italy)

In Carrara marble basins, the long and intensive quarrying activities (which began in the first century BC ) have produced extensive dump deposits, locally known as ravaneti. Ravaneti are of such large dimensions and diffusion as to make them a widespread landform of the Apuane Alps (Tuscany). In recent years these quarry dump deposits have been affected by frequent debris flows, more than 50 in 1996/97. This phenomenon is the most significant currently active geomorphological process in this landscape. The evolution of quarrying techniques produced a variety of sedimentological compositions of ravaneti. The debris flows analysed involve only the surface layers where debris is mixed with fine material with a lower permeability (active ravaneti) than the coarser underlying debris (older ravaneti). The presence of different permeability layers causes a wetting front to move downwards. Source area observations indicate a soil slip movement in the initial phases of the failure. The transformation of landslides into debris flow occurs by means of both soil contractive failure and an increase of granular temperature. The morphological and sedimentological analyses of depositional lobes resulted in a classification of three types of lobe, based on fabric–morphometry relationships allowing the identification of different flow dynamics: (1) type A lobe (platy form), matrix‐supported and well developed fabric with general tendency of ab clast plane strikes to lie generally parallel to flow direction as a consequence of laminar flow; (2) type B lobe (elongated form), clast‐supported and random fabric as a consequence of both turbulent flow and coarser composition of starting material; (3) type C lobe, intermediate type A–B morphometry, tendency for ab clast plane to lie in a semi‐circle around the main flow direction determined by the presence of secondary flow lines divergent from it in the stopping phase. In Carrara marble basins, the anomalous frequency with which debris flows tend to be triggered by medium‐intensity rainstorms (about 30 mm h⁻¹ rainfall) is due to the recent increases in silt dump produced by modern quarrying techniques. This represents a significant example of debris flows as an environmental problem in major anthromorphized landscapes. Copyright © 2000 John Wiley & Sons, Ltd.     

Incorporating spatially heterogeneous infiltration capacity into hydrologic models with applications for simulating post‐wildfire debris flow initiation

Soils in post‐wildfire environments are often characterized by a low infiltration capacity with a high degree of spatial heterogeneity relative to unburned areas. Debris flows are frequently initiated by run‐off in recently burned steeplands, making it critical to develop and test methods for incorporating spatial variability in infiltration capacity into hydrologic models. We use Monte Carlo simulations of run‐off generation over a soil with a spatially heterogenous saturated hydraulic conductivity (K_s) to derive an expression for an aerially averaged saturated hydraulic conductivity ( ) that depends on the rainfall rate, the statistical properties of K_s, and the spatial correlation length scale associated with K_s. The proposed method for determining is tested by simulating run‐off on synthetic topography over a wide range of spatial scales. Results provide a simplified expression for an effective saturated hydraulic conductivity that can be used to relate a distribution of small‐scale K_s measurements to infiltration and run‐off generation over larger spatial scales. Finally, we use a hydrologic model based on to simulate run‐off and debris flow initiation at a recently burned catchment in the Santa Ana Mountains, CA, USA, and compare results to those obtained using an infiltration model based on the Soil Conservation Service Curve Number.     

Modelling a cohesive‐frictional debris flow: an experimental,theoretical, and field‐based study

The rheology of debris flows is difficult to characterize owing to the varied composition and to the uneven distribution of the components that may range from clay to large boulders, in addition to water. Few studies have addressed debris flow rheology from observational, experimental, and theoretical viewpoints in conjunction. We present a coupled rheological‐numerical model to characterize the debris flows in which cohesive and frictional materials are both present. As a first step, we consider small‐scale artificial debris flows in a flume with variable percentages of clay versus sand, and measure separately the rheological properties of sand–clay mixtures. A comparison with the predictions of a modified version of the numerical model BING shows a reasonable agreement between measurements and simulations. As application to a field case, we analyse a recent debris flow that occurred in Fjærland (Western Norway) for which much information is now available. The event was caused by a glacial lake outburst flood (GLOF) originating from the failure of a moraine ridge. In a previous contribution (Breien et al., Landslides, 2008 , 5: 271–280) we focused on the hydrological and geomorphological aspects. In particular we documented the marked erosion and reported the change in sediment transport during the event. In contrast to the laboratory debris flows, the presence of large boulders and the higher normal pressure inside the natural debris flow requires the introduction of a novel rheological model that distinguishes between mud‐to–clast supported material. We present simulations with a modified BING model with the new cohesive‐frictional rheology. To account for the severe erosion operated by the debris flow on the colluvial deposits of Fjærland, we also suggest a simple model for erosion and bulking along the slope path. Numerical simulations suggest that a self‐sustaining mechanism could partly explain the extreme growth of debris flows running on a soft terrain.     

Geomorphic effects of large debris flows on channel morphology at North Fork Mountain,eastern West Virginia,USA

Extreme rainfall in June 1949 and November 1985 triggered numerous large debris flows on the steep slopes of North Fork Mountain, eastern West Virginia. Detailed mapping at four sites and field observations of several others indicate that the debris flows began in steep hillslope hollows, propagated downslope through the channel system, eroded channel sediment, produced complex distributions of deposits in lower gradient channels, and delivered sediment to floodwaters beyond the debris-flow termini. Based on the distribution of deposits and eroded surfaces, up to four zones were identified with each debris flow: an upper failure zone, a middle transport/erosion zone, a lower deposition zone, and a sediment-laden floodwater zone immediately downstream from the debris-flow terminus. Geomorphic effects of the debris flows in these zones are spatially variable. The initiation of debris flows in the failure zones and passage through the transport/erosion zones are characterized by degradation; 2300 to 17 000 m³ of sediment was eroded from these zones. The total volume of channel erosion in the transport/erosion zones was 1·3 to 1·5 times greater than the total volume of sediment that initially failed, indicating that the debris flows were effective erosion agents as they travelled through the transport/erosion zones. The overall response in the deposition zones was aggradation. However, up to 43 per cent of the sediment delivered to these zones was eroded by floodwaters from joining tributaries immediately after debris-flow deposition. This sediment was incorporated into floodwaters downstream from the debris-flow termini causing considerable erosion and deposition in these channels. © 1998 John Wiley & Sons, Ltd.     

Post‐fire thin debris flows: sediment transport and numerical modelling

The creation of a hydrophobic layer in the soil during ?res in semi‐arid environments inhibits the in?ltration of rainfall. This leads to increased rates of runoff and associated sediment transport. When the hydrophobic layer is deposited beneath the soil surface, a perched water table develops which may cause thin (1–2 cm) hillslope failures that are distinguishable from features caused by rilling and sheet?ow. Evidence for these failures was observed after a ?re near Santa Barbara, California. The amount of sediment eroded from some hillslopes was substantial, with 290 kg of sediment per metre width of hillslope delivered to the valley ?oor. The mechanics of these failures are examined with a numerical model that incorporates a stability analysis with subsurface ?ow routing along a typical hillslope pro?le. The model correctly predicts the location of the failures as well as the rainfall amount necessary to trigger them. Copyright © 2003 John Wiley & Sons, Ltd.     

Geomorphic influences on the distribution and accumulation of pyrogenic carbon (PyC) following a low severity wildfire in northern New Mexico

The distribution, transport, and accumulation of wildfire‐generated pyrogenic carbon (PyC) has important consequences for contaminant transport and carbon cycling, but a conceptual model for PyC accumulation and loss that includes geomorphic processes is lacking. In this study we quantified PyC concentration in soil samples collected from the Jemez Mountains of New Mexico before and after the 2013 Thompson Ridge (TR) fire, and developed a conceptual model describing PyC redistribution. Pre‐fire samples were fortuitously collected 4 years before the TR burn and post‐fire samples were collected at the same locations 15 months following the TR fire. Samples were collected from the O and A horizon, with sites representing a range of slope angle, aspect, burn severity, and geomorphic setting. PyC was determined by a modified chemo‐thermal oxidation method to compare PyC to total organic carbon (TOC). The mean PyC/TOC ratio was significantly higher post‐fire than pre‐fire (0.14 vs 0.12), indicating increased PyC sequestration. O horizon PyC concentrations were more variable and more responsive to fire than the A horizon. Soil horizon, watershed, and geomorphic setting proved to be the most influential factors in predicting PyC concentration changes. PyC concentrations increased most on hillslopes and in low‐severity burn areas, suggesting higher rates of PyC production or post‐fire accumulation. Burn patchiness appears to facilitate PyC accumulation, with lower severity patches trapping PyC mobilized from high severity patches. While PyC content had greater point scale variance following the fire, the fire also homogenized pre‐fire PyC differences between soil horizons and among watersheds within the burn perimeter, differences that appear to develop over time between fires. The O horizon is a larger sink for PyC in the short term following fire, but based on pre‐fire concentrations the A horizon appears to be a more stable sink for PyC. Copyright © 2018 John Wiley & Sons, Ltd.     

Velocity profiles and basal stresses in natural debris flows

The internal deformation within debris flows holds essential information on dynamics and flow resistance of such mass-wasting processes. Systematic measurements of velocity profiles in real-scale debris flows are not yet available. Additionally, data on basal stresses of the solid and the fluid phase are rare. Here, we present and analyse measurements of vertical velocity profiles in two debris flows naturally occurring in the Gadria Creek, Italy. The method is based on cross-correlation of paired conductivity signals from an array of sensors installed on a fin-shaped wall located in the middle of the channel. Additionally, we measure normal stress and pore fluid pressure by two force plates with integrated pressure transducers. We find internal deformation throughout the flows. Only at the very front was some en-bloc movement observed. Velocity profiles varied from front to tail and between flows. For one debris flow, pore fluid pressure close to normal stress was measured, whereas the other flow was less liquefied. The median shear rates were mostly less than 5 s⁻¹ and Savage numbers at the basal layer ranged from 0.01 to 1. Our results highlight the variable nature of debris flows and provide quantitative data on shear rate and basal stress distribution to help guide model development for hazard assessment and landscape evolution. © 2020 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd.     

Magnetic enhancement in wildfire‐affected soil and its potential for sediment‐source ascription

Intense rainfall following wildfire can cause substantial soil and sediment redistribution. With concern for the increasing magnitude and frequency of wildfire events, research needs to focus on hydrogeomorphological impacts of fire, particularly downstream fluxes of sediment and nutrients. Here, we investigate variation in magnetic enhancement of soil by fire in burnt eucalypt forest slopes to explore its potential as a post‐fire sediment tracer. Low‐frequency magnetic susceptibility values (χ_lf) of <10 µm material sourced from burnt slopes (c. 8·0–10·4 × 10^?6 m³ kg^?1) are an order of magnitude greater than those of <10 µm material derived from long‐unburnt areas (0·8 × 10^?6 m³ kg^?1). Susceptibility of anhysteretic remanent magnetization (χARM) and saturation isothermal remanent magnetization (SIRM) values are similarly enhanced. Signatures are strongly influenced by soil and sediment particle size and storage of previously burnt material in footslope areas. Whilst observations indicate that signatures based on magnetic enhancement show promise for post‐fire sediment tracing, problems arise with the lack of dimensionality in such data. Magnetic grain size indicators χ_fd%, χARM/SIRM and χ_fd/χARM offer further discrimination of source material but cannot be included in numerical unmixing models owing to non‐linear additivity. This leads to complications in quantitatively ascribing downstream sediment to source areas of contrasting burn severity since sources represent numerical multiples of each other, indicating the need to involve additional indicators, such as geochemical evidence, to allow a more robust discrimination. Copyright © 2005 John Wiley & Sons, Ltd.