Periglacial and Fluvial Factors Controlling the Sedimentation of Pleistocene Breccia in NW Poland

Breccias were investigated on the terrace of the Toruń‐Eberswalde ice‐marginal valley at Rozwarzyn (NW Poland). Breccia layers include soft‐sediment clasts with diameters between 2 and 256 mm and soft‐sediment megaclasts with diameters from 256 mm to 7 m. The shape of the soft‐sediment clasts and megaclasts (derived from frozen sediments) in the breccia is diverse: from angular and irregular in the case of debris‐flow breccias to slightly rounded and tabular in fluvial breccias. These two types of breccias were developed during the Late Weichselian when the periglacial climate favored extensive lateral erosion by currents of frozen braided channels in the ice‐marginal valley. The dual presence of breccias of fluvial and debris‐flow origin in channel deposits is unique for Quaternary sediments. Zones of breccias existed in the channels where scours and obstacle marks related to megaclasts developed. The study of breccias shed new light on the fluvial processes in ice‐marginal valleys during the Pleistocene and can be considered as diagnostic for fluvio‐periglacial conditions.     

Downstream trends in sediment size and composition of channel-bed, bar, and bank deposits related to hydrologic and lithologic controls in the Llano River watershed, central Texas, USA

The downstream fining of fluvial sediments is a fundamental tenet of drainage systems and, for decades, has been the subject of considerable research. Most of this research has focused on variability in channel-bed material. Other sedimentological components such as channel bars and banks, however, represent distinctively different processes occurring at various flow magnitudes and durations and thus provide an opportunity to examine a more comprehensive set of controls on the larger fluvial system. This study analyses downstream patterns of sediment size and composition for channel-bed material, bars, and banks in the Llano River watershed (11,568 km²) in central Texas, USA.Fluvial deposits in the study area were characterized through field, laboratory, and statistical analyses and standard sedimentary indices (d₁₆, d₅₀, d₈₄, sorting) were computed. Two hundred thirty-eight sediment samples were collected at 15 sites along the main-stem channel with sampling occurring at the low-flow channel (thalweg), lateral bars, banks, and overbank locations. Channel-bar deposits are characterized by a downstream reduction in particle size, but low-flow-channel deposits have a substantially weaker trend, a discrepancy possibly attributed to uniformity and continuity of hydraulic sorting mechanisms during moderate and high flows. Channel-bar deposits reveal an abrupt downstream reduction in gravel size in the upper watershed, which is attributed to an increase in drainage area. Further, an abrupt gravel-to-sand transition occurs immediately downstream of a distinct lithologic change from mostly carbonate rocks to igneous and metamorphic rocks. The downstream decrease in channel-bar particle size occurs despite an increasingly constricted alluvial valley, commonly associated with greater unit stream power and relatively coarse sediment. Contrasting with channel-bed material, particle size of channel banks increases downstream, which is attributed to the addition of sand-sized sediment from igneous and metamorphic rocks. The consideration of distinctive sedimentological components of a dynamic fluvial system represents a more comprehensive and nuanced study of the topic of downstream sediment trends than prior studies, which is important to a range of engineering, biological, and planning issues at the watershed scale.     

CHANNEL CHANGES IN ARID BADLANDS,BORREGO SPRINGS,CALIFORNIA

Geometric, hydraulic, and sediment characteristics in arid badlands near Borrego Springs, California, are examined in relation to precipitation events of varying magnitude and frequency. The longitudinal and cross profiles of five ephemeral channels occupying a 2.5 km² catchment were surveyed under pre-and post-storm conditions during the February 1976-December 1978 period. Such arid region channels offer the opportunity to observe and explain rates and methods of profile change under different flow types in a short period of time. Catchment responses to light winter events include substantial lags between initial precipitation and channel runoff, the limited downstream movement of small slugs of sediment, high losses of discharge into channel alluvium, and prolonged mass movement of debris from adjacent hillslopes into the channels following the storm events thus promoting aggradation along certain channel reaches. Responses to intense summer storms include explosive channel and hillslope runoff and localized scour and fill, both during and following such events, thereby promoting substantial aggradation and erosion along portions of the channels. Although ephemeral flow conditions may produce channel profiles which are distinct from those in perennial streams, the evaluation of the methods of sediment transport and the storage of debris in arid catchments offer useful explanation for other environments.     

Mapping the spatial and temporal distributions of woody debris in streams of the Greater Yellowstone Ecosystem, USA

The objectives of this study were: (1) to document spatial and temporal distributions of large woody debris (LWD) at watershed scales and investigate some of the controlling processes; and (2) to judge the potential for mapping LWD accumulations with airborne multispectral imagery. Field surveys were conducted on the Snake River, Soda Butte Creek, and Cache Creek in the Greater Yellowstone Ecosystem, USA. The amount of woody debris per kilometer is highest in 2nd order streams, widely variable in 3rd and 4th order streams, and relatively low in the 6th order system. Floods led to increases in woody debris in 2nd order streams. Floods redistributed the wood in 3rd and 4th order streams, removing it from the channel and stranding it on bars, but appeared to generate little change in the total amount of wood throughout the channel system. The movement of woody debris suggests a system that is the reverse of most sediment transport systems in mountains. In 1st and 2nd order tributaries, the wood is too large to be moved and the system is transport-limited, with floods introducing new material through undercutting, but not removing wood through downstream transport. In the intermediate 3rd and 4th order channels, the system displays characteristics of dynamic equilibrium, where the channel is able remove the debris at approximately the same rate that it is introduced. The spatial distribution and quantity of wood in 3rd and 4th order reaches varies widely, however, as wood is alternatively stranded on gravel bars or moved downstream during periods of bar mobilization. In the 6th order and larger channels, the system becomes supply-limited, where almost all material in the main stream can be transported out of the central channel by normal stream flows and deposition occurs primarily on banks or in eddy pool environments. Attempts to map woody debris with 1-m resolution digital four-band imagery were generally unsuccessful, primarily because the imagery could not distinguish the narrow logs within a pixel from the surrounding sand and gravel background and due to problems in precisely coregistering imagery and field maps.     

Relief-rejuvenation and topographic length scales in a fluvial drainage basin, Napf area, Central Switzerland

This paper explores how, and to what extent, a phase of relief-rejuvenation modifies the mode of surface erosion in an approximately 63 km² drainage basin located at the northern border of the Swiss Alps (Luzern area). In the study area, the retreat of the Alpine glaciers at the end of the Last Glacial Maximum (LGM) caused base level to lower by approximately 80 m. The fluvial system adapted to the lowered base level by headward erosion. This is indicated by knickzones in the longitudinal stream profiles and by the continuous upstream narrowing of the width of the valley floor towards these knickzones. In the headwaters above these knickzones, processes are still to a significant extent controlled by the higher base level of the LGM. There, frequent exposure of bedrock in channels and especially on hillslopes implies that sediment flux is to a large extent limited by weathering rates. In the knickzones, however, exposure of bedrock in channels implies that sediment flux is supply-limited, and that erosion rates are controlled by stream power.The morphometric analysis reveals the existence of length scales in the topography that result from distinct geomorphic processes. Along the tributaries where the upstream sizes of the drainage basins exceed 100,000–200,000 m², the mode of sediment transport and erosion changes from predominantly hillslope processes (i.e., landsliding, creep of regolith, rock avalanches and to some extent debris flows) to processes in channels (fluvial processes and debris flows). This length scale reflects the minimum size of the contributing area for channelized processes to take over in the geomorphic development (i.e., threshold size of drainage basin). This threshold size depends on the ratio between production rates of sediment on hillslopes, and export rates of sediment by processes in channels. Consequently, in the headwaters, erosion rates and sediment flux, and hence landscape evolution rates, are to a large extent limited by weathering processes. In contrast, in the lower portion of the drainage basin that adjusts to the lowered base-level, rates of channelized erosion and relief formation are controlled mainly by stream power. Hence, this paper shows that base-level lowering, headward erosion and establishment of knickzones separate drainage basins in two segments with different controls on rates of surface erosion, sediment flux and relief formation.     

Bed load transport in an obstruction-formed pool in a forest, gravelbed stream

This paper examines channel dynamics and bed load transport relations through an obstruction-forced pool in a forest, gravel-bed stream by comparing flow conditions, sediment mobility, and bed morphology among transects at the pool head, centre, and tail. Variable sediment supply from within and outside of the channel led to a complex pattern of scour and fill hysteresis. Despite the large flood magnitude, large portions of the bed did not scour. Scour was observed at three distinct locations: two of these were adjacent to large woody debris (LWD), and the third was along the flow path deflected by a major LWD obstruction. Bed material texture showed little change in size distribution of either surface or subsurface material, suggesting lack of disruption of the pre-flood bed. Fractions larger than the median size of the bed surface material were rarely mobile. Sediment rating relations were similar, although temporal variation within and among stations was relatively high. Relations between bed load size distribution and discharge were complex, showing coarsening with increasing discharge followed by fining as more sand was mobilized at high flow. Lack of local scour in the pool combined with bed load fining and net fill by relatively fine material implied that the dominant sources of mobile sediment were upstream storage sites and local bank collapse. Patterns of flow, channel dynamics, and sediment mobility were strongly affected by a LWD flow obstruction in the pool centre that created turbulent effects, thereby enhancing entrainment and transport in a manner similar to scour at bridge piers.     

Holocene Brahmaputra River path selection and variable sediment bypass as indicators of fluctuating hydrologic and climate conditions in Sylhet Basin,Bangladesh

The Holocene stratigraphy of Sylhet basin, a tectonically influenced sub‐basin within the Ganges‐Brahmaputra‐Meghna delta (GMBD), provides evidence for autogenic and allogenic controls on fluvial system behaviour. Using Holocene lithology and stratigraphic architecture from a dense borehole network, patterns of bypass‐dominated and extraction‐enhanced modes of sediment transport and deposition have been reconstructed. During a ~3‐kyr mid‐Holocene occupation of Sylhet basin by the Brahmaputra River, water and sediment were initially (~7.5–6.0 ka) routed along the basin's western margin, where limited downstream facies changes reflect minimal mass extraction and bypass‐dominated transport to the basin outlet. Sediment‐dispersal patterns became increasingly depositional ~6.0–5.5 ka with the activation of a large (~2250 km²) splay that prograded towards the basin centre while maintaining continued bypass along the western pathway. Beginning ~5.0 ka, a second splay system constructed an even larger (~3800 km²) lobe into the most distal portions of the basin along the Shillong foredeep. This evolution from a bypass‐dominated system to one of enhanced mass extraction is well reflected in (i) the rapid downstream fining of deposited sand and (ii) a change in facies from amalgamated channel deposits to mixed sands and muds within discrete depositional lobes. The persistence of sediment bypass suggests that seasonal flooding of the basin by local runoff exerts a hydrologic barrier to overbank flow and is thus a principal control on river path selection. This control is evidenced by (i) repeated, long‐term preference for occupying a course along the basin margin rather than a steeper path to the basin centre and (ii) the persistence of an under‐filled, topographically low basin despite sediment load sufficient to fill the basin within a few hundred years. The progradation of two 10–20‐m thick, sandy mega‐splays into the basin interior reflects an alternative mode of sediment dispersal that appears to have operated only in the mid‐Holocene (~6.0–4.0 ka) during a regional weakening of the summer monsoon. The reduced water budget at that time would have lowered seasonal water levels in the basin, temporarily lessening the hydrologic barrier effect and facilitating splay development into the basin interior. Overall, these results place basin hydrology as a first‐order control on fluvial system behaviour, strongly modifying the perceived dominance of tectonic subsidence. Such coupling of subsidence, fluvial dynamics and local hydrology have been explored through tank experiments and modelling; this field study demonstrates that complex, emergent behaviours can also scale to the world's largest fluvial system.     

ASYNCHRONOUS TERRACE DEVELOPMENT IN DEGRADING BRAIDED CHANNELS

Terrace remnants are commonly used to reconstruct longitudinal profiles of rivers and floodplains, and to establish temporal correlations of events in fluvial systems. In most cases, it is assumed that the terrace remnants represent time-equivalent surfaces. Our observations of terrace formation in flume experiments and in a degrading braided river, Ash Creek, Arizona, suggest that this assumption is not always valid. Degradation resulted from a reduction in upstream sediment delivery to braided channels. In both the flume and Ash Creek, degradation in the upstream reach produced a number of inset terraces, while the production of sediment in the degrading reach simultaneously caused further aggradation downstream. Thus, stratigraphically lower surfaces in the upstream reaches are temporally equivalent to higher surfaces in downstream reaches. The downstream progression of the wave of incision produced more terraces upstream than downstream, and terrace surfaces could not be correlated on the basis of relative position or elevation above the channel bed. Furthermore, a physically continuous terrace tread was produced by longitudinal accretion of temporally non-equivalent depositional segments, as the locus of deposition progressed downstream. Therefore, in some instances, physically continuous terrace treads may not be time-equivalent surfaces that represent former channel bed or floodplain profiles. [Key words: terrace development, degradation, braided channels, channel pattern change.]     

Sink‐to‐source: Influence of offshore dynamics on upstream processes

When we model fluvial sedimentation and the resultant alluvial stratigraphy, we typically focus on the effects of local parameters (e.g., sediment flux, water discharge, grain size) and the effects of regional changes in boundary conditions applied in the source region (i.e., climate, tectonics) and at the shoreline (i.e., sea level). In recent years this viewpoint has been codified into the “source‐to‐sink” paradigm, wherein major shifts in sediment flux, grain‐size fining trends, channel‐stacking patterns, floodplain deposition and larger stratigraphic systems tracts are interpreted in terms of (1) tectonic and climatic signals originating in the hinterland that propagate downstream; and (2) eustatic fluctuation, which affects the position of the shoreline and dictates the generation of accommodation. Within this paradigm, eustasy represents the sole means by which downstream processes may affect terrestrial depositional systems. Here, we detail three experimental cases in which coastal rivers are strongly influenced by offshore and slope transport systems via the clinoform geometries typical of prograding sedimentary bodies. These examples illustrate an underdeveloped, but potentially important “sink‐to‐source” influence on the evolution of fluvial‐deltaic systems. The experiments illustrate the effects of (1) submarine hyperpycnal flows, (2) submarine delta front failure events, and (3) deformable substrates within prodelta and offshore settings. These submarine processes generate (1) erosional knickpoints in coastal rivers, (2) increased river channel occupancy times, (3) rapid rates of shoreline movement, and (4) localized zones of significant offshore sediment accumulation. Ramifications for coastal plain and deltaic stratigraphic patterns include changes in the hierarchy of scour surfaces, fluvial sand‐body geometries, reconstruction of sea‐level variability and large‐scale stratal geometries, all of which are linked to the identification and interpretation of sequences and systems tracts.     

Modern and ancient fluvial megafans in the foreland basin system of the central Andes, southern Bolivia: implications for drainage network evolution in fold-thrust belts

ABSTRACT Fluvial megafans chronicle the evolution of large mountainous drainage networks, providing a record of erosional denudation in adjacent mountain belts. An actualistic investigation of the development of fluvial megafans is presented here by comparing active fluvial megafans in the proximal foreland basin of the central Andes to Tertiary foreland‐basin deposits exposed in the interior of the mountain belt. Modern fluvial megafans of the Chaco Plain of southern Bolivia are large (5800–22 600 km²), fan‐shaped masses of dominantly sand and mud deposited by major transverse rivers (Rio Grande, Rio Parapeti, and Rio Pilcomayo) emanating from the central Andes. The rivers exit the mountain belt and debouch onto the low‐relief Chaco Plain at fixed points along the mountain front. On each fluvial megafan, the presently active channel is straight in plan view and dominated by deposition of mid‐channel and bank‐attached sand bars. Overbank areas are characterized by crevasse‐splay and paludal deposition with minor soil development. However, overbank areas also contain numerous relicts of recently abandoned divergent channels, suggesting a long‐term distributary drainage pattern and frequent channel avulsions. The position of the primary channel on each megafan is highly unstable over short time scales. Fluvial megafans of the Chaco Plain provide a modern analogue for a coarsening‐upward, > 2‐km‐thick succession of Tertiary strata exposed along the Camargo syncline in the Eastern Cordillera of the central Andean fold‐thrust belt, about 200 km west of the modern megafans. Lithofacies of the mid‐Tertiary Camargo Formation include: (1) large channel and small channel deposits interpreted, respectively, as the main river stem on the proximal megafan and distributary channels on the distal megafan; and (2) crevasse‐splay, paludal and palaeosol deposits attributed to sedimentation in overbank areas. A reversal in palaeocurrents in the lowermost Camargo succession and an overall upward coarsening and thickening trend are best explained by progradation of a fluvial megafan during eastward advance of the fold‐thrust belt. In addition, the present‐day drainage network in this area of the Eastern Cordillera is focused into a single outlet point that coincides with the location of the coarsest and thickest strata of the Camargo succession. Thus, the modern drainage network may be inherited from an ancestral mid‐Tertiary drainage network. Persistence and expansion of Andean drainage networks provides the basis for a geometric model of the evolution of drainage networks in advancing fold‐thrust belts and the origin and development of fluvial megafans. The model suggests that fluvial megafans may only develop once a drainage network has reached a particular size, roughly 10⁴ km²– a value based on a review of active fluvial megafans that would be affected by the tectonic, climatic and geomorphologic processes operating in a given mountain belt. Furthermore, once a drainage network has achieved this critical size, the river may have sufficient stream power to prove relatively insensitive to possible geometric changes imparted by growing frontal structures in the fold‐thrust belt.     

Impact of hillslope-derived sediment supply on drainage basin development in small watersheds at the northern border of the central Alps of Switzerland

This paper explores the effects of hillslope mobility on the evolution of a 10-km² drainage basin located at the northern border of the Swiss Alps. It uses geomorphologic maps and the results of numerical models that are based on the shear stress formulation for fluvial erosion and linear diffusion for hillslope processes. The geomorphic data suggest the presence of landscapes with specific cross-sectional geometries reflecting variations in the relationships between processes in channels and on hillslopes. In the headwaters, the landscape displays parabolic cross-sectional geometries indicating that mass delivered to channels by hillslope processes is efficiently removed. In the trunk stream portion, the landscape is (i) V-shaped if the downslope flux of mass is balanced by erosion in channels (i.e. if mass delivered to channels by hillslope processes is efficiently removed) and (ii) U-shaped if in-channel accumulation of hillslope-derived material occurs. This latter situation indicates a non-balanced mass flux between processes in channels and on hillslopes.Information about the spatial pattern of the postglacial depth of erosion allows comparative estimates to be made about the erosional efficiency for the various landscapes that were mapped in the study area. The data suggest that the erosional potential and sediment discharge are reduced for the situation of a non-balanced mass flux between processes in channels and on hillslopes. These findings are also supported by the numerical model. Indeed, the model results show that high hillslope mobility tends to reduce the hillslope relief and to inhibit dissection and formation of channels. In contrast, stable hillslopes tend to promote fluvial incision, and the hillslope relief increases. The model results also show that very low erosional resistance of bedrock promotes backward erosion and steepening of channel profiles in headwaters. Beyond that, the model reveals that sediment discharge generally increases with decreasing erosional resistance of bedrock, but that this increase decays exponentially with increasing magnitudes of fluvial and hillslope mobilities. Very high hillslope diffusivities even tend to reduce the erosional potential of the whole watershed. It appears that besides rates of base-level lowering, factors limiting sediment discharge might be the nonlinear relationships between processes in channels and on hillslopes.     

Trends of grain sizes on gravel bars in the Rio Chagres, Panama

We examined the trends of grain sizes along the upper 414 km² of the mountainous Rio Chagres drainage basin in Panama. Gravel bars were sampled along 40 km of the Rio Chagres and five major tributary streams using a transect pebble count of median diameter, lithology, and clast rounding. Although previous investigators have found that downstream fining can be obscured by inputs of colluvial sediment and other local controls in mountain drainages, we decided to examine the trends of grain sizes along a tropical mountain river where rapid weathering and high capability of transport might be capable of overriding the input effects of colluvium. Specifically, we tested the hypotheses that downstream fining would be present as a result of selective sorting, and that weak felsic particles would decrease in size preferentially to strong mafic particles because of abrasion. Statistical analyses reveal a weak downstream decrease of sediment size on gravel bars along the study reach of the Rio Chagres, with a Sternberg diminution coefficient (α) for felsic and mafic grains of − 0.013 and − 0.017, respectively. Felsic clasts have thicker weathering rinds and become rounded downstream faster than mafic particles, but tumbling-mill tests of abrasion show no significant differences in rate of mass loss in relation to lithology, and downstream decreases in grain size are similar between lithologies. Dividing the study reach into six sub-reaches bounded by major tributary junctions, we further tested the hypothesis that downstream trends in fining might be obscured at the basin scale by sediment input from tributaries, but that trends in grain sizes might be more visible at the reach scale between tributaries. We did not find any consistent trends in grain size between tributaries. Stream width appears to assert a local control on grain size; coarse particles are associated with narrow channel reaches, whereas smaller particles are associated with wide channel reaches.     

Lithologic control of debris torrent occurrence

A field-based investigation into the frequency and magnitude of debris torrent systems reveals that lithology controls the spatial and temporal occurrence of debris torrents in the Tsitika Watershed, Vancouver Island, British Columbia. We identified 125 debris torrent systems in the watershed; for half these basins we used dendrochronology, historical air photographs, and field surveys to estimate debris torrent frequency and magnitude for a 30 year period. We find that the volcaniclastic half of the watershed contains more than twice as many debris torrent systems, in which debris torrents occur over seven times more frequently, and the deposits have a higher rate of delivery of sediment to the mainstem river than the intrusive half. Lithologic differences in weathering rates, weathering product grain size, and rock texture can explain the observed differences in debris torrent behaviour. Because debris torrents are the main sediment transport path from hilltop to valley bottom in the region, these results confirm an important lithologic control on regional sediment transport. While the exact numbers are uncertain, we estimate that the sediment flux of volcaniclastic debris torrents in the watershed is five times higher than that of the intrusive debris torrents.     

Profile convexities in bedrock and alluvial streams

Longitudinal profiles of bedrock streams in central Kentucky, and of coastal plain streams in southeast Texas, were analyzed to determine the extent to which they exhibit smoothly concave profiles and to relate profile convexities to environmental controls. None of the Kentucky streams have smoothly concave profiles. Because all observed knickpoints are associated with vertical joints, if they are migrating it either occurs rapidly between vertical joints, or migrating knickpoints become stalled at structural features. These streams have been adjusting to downcutting of the Kentucky River for at least 1.3 Ma, suggesting that the time required to produce a concave profile is long compared to the typical timescale of environmental change. A graded concave longitudinal profile is not a reasonable prediction or benchmark condition for these streams. The characteristic profile forms of the Kentucky River gorge area are contingent on a particular combination of lithology, structure, hydrologic regime, and geomorphic history, and therefore do not represent any general type of equilibrium state. Few stream profiles in SE Texas conform to the ideal of the smoothly, strongly concave profile. Major convexities are caused by inherited topography, geologic controls, recent and contemporary geomorphic processes, and anthropic effects. Both the legacy of Quaternary environmental change and ongoing changes make it unlikely that consistent boundary conditions will exist for long. Further, the few exceptions within the study area–i.e., strongly and smoothly concave longitudinal profiles–suggest that ample time has occurred for strongly concave profiles to develop and that such profiles do not necessarily represent any mutual adjustments between slope, transport capacity, and sediment supply. The simplest explanation of any tendency toward concavity is related to basic constraints on channel steepness associated with geomechanical stability and minimum slopes necessary to convey flow. This constrained gradient concept (CGC) can explain the general tendency toward concavity in channels of sufficient size, with minimal lithological constraints and with sufficient time for adjustment. Unlike grade- or equilibrium-based theories, the CGC results in interpretations of convex or low-concavity profiles or reaches in terms of local environmental constraints and geomorphic histories rather than as “disequilibrium” features.     

A Fifty‐Year Record of Historical Sedimentation at Deer Lake,North Carolina*

Although many once‐deforested areas of the eastern United States are now revegetated, impacts of this disturbance on watershed processes may persist. In this study, lake sediment stratigraphy and magnetism were used to assess the recovery of a small watershed in the southern Blue Ridge Mountains following abrupt reduction of human impacts. Average sediment yields were found to be higher than those of less disturbed basins nearby, and lower than those reported from the early twentieth‐century Piedmont Province. Temporal trends in sediment yield appear to reflect both meteorological and land‐use histories. Although most of the lake sediment is magnetically similar to bottomland sources, two instances of local upland sediment input, possibly related to human activities, are evident in the record. Interpreting relationships between sediment yield and changing environmental influences is impeded by poor temporal control in the methodology as well as by the intrinsic dynamics of the fluvial system.     

Local- and watershed-scale controls on the spatial variability of natural levee deposits in a large fine-grained floodplain: Lower Pánuco Basin, Mexico

This study examines spatial variations in natural levee deposits within the lower reaches of a large coastal plain drainage system. The Pánuco basin (98,227 km²) drains east-central Mexico, and is an excellent setting to examine the influence of watershed and local controls on the morphology and sedimentology of natural levees. Although many fluvial systems in the U.S. Gulf Coastal Plain have been investigated, the rivers in the Mexican Gulf Coastal Plain have received comparatively little attention. Lateral and downstream characteristics of natural levee morphology and sediment texture are considered within the context of meandering river floodplain deposits. Data sources include total-stations surveying, sediment samples of surficial levee deposits, topographic maps (1:50,000), and aerial photographs (1:40,000). The slope of natural levees average 0.0049 m/m, whereas the texture (D₈₄) of levee deposits averages 0.12 mm. Natural levee characteristics vary due to local- and watershed-scale controls. The lateral reduction in levee height displays a curvilinear pattern that coincides with an abrupt change in sediment texture. The downstream pattern of natural levee texture exhibits the influence of local-scale perturbations superimposed upon a larger watershed-scale trend. Disruption to the fining trend, either by tributary inputs of sediment or reworking of Tertiary valley deposits, is retained for a limited distance. The influence of the channel planform geometry on levee morphology is examined by consideration of the radius of curvature (R_c) of meander bends, and is inversely related to natural levee width. This suggests that the planform geometry of river channels exerts a control on the dispersal of flood sediments, and is responsible for considerable local variability in the floodplain topography. The average width of natural levees increases with drainage area, from an average of 747 m in the Moctezuma to an average of 894 m in the Pánuco. However, in the lower reaches of the Pánuco valley the width of natural levees rapidly decreases, which is associated with fining of the suspended sediment load. Thus, the reduction in natural levee width signifies an abrupt change in the directionality of cause–effect relationships at the watershed-scale. Findings from this study elucidate linkages between meandering river channels and floodplains for a large lowland alluvial valley.     

Linking subaerial erosion with submarine geomorphology in the western Ionian Sea (south of the Messina Strait), Italy

Sediment supplied by continental sources is commonly suspected to have exerted a strong influence on the development of canyons and other morphological features on the continental slopes, but rarely is the sediment supply known sufficiently quantitatively to test this link. Here, we outline an area where offshore morphology, in the western Ionian Sea, may be linked to estimated sediment fluxes produced by subaerial erosion in NE Sicily and SW Calabria. Shelves in this area are narrow (<1 km), and the bathymetry shows that rivers and adjacent submarine channels are almost directly connected with each other. Integrated topographic analyses were performed on a merged digital elevation model (DEM) of ASTER data for subaerial topography and multibeam sonar data for submarine bathymetry. Spatial variations in sediment fluxes from onshore erosion were assessed using a variety of methods, namely: long‐term sediment flux from Pleistocene uplift rates, decadal sediment flux from landslide occurrences and published long‐term exhumation rates from ¹⁰Be cosmogenic nuclide concentrations. Submarine channels associated with rivers delivering larger sediment fluxes have broad channels, high relief and smooth concave‐upward longitudinal profiles. Conversely, submarine channels that lie offshore small‐flux rivers have straight longitudinal profiles, low relief and steep gradients. Where river catchments supply a greater sediment flux offshore, shelves tend to be wider (ca. 400 m) and submarine channels have gentler gradients. In contrast, where catchments supply less sediment flux, shelves are narrow (250–300 m) and offshore channel gradients are steeper. The variation of submarine morphology with tectonic uplift rate was also studied, but we find that, unlike onshore terrains where tectonics is commonly an important factor influencing channel morphology, in the submarine landscapes, sediment flux appears to dominate here.     

Material component to non-linear relation between sediment yield and drainage network development:an flume experimental study

1 IntroductionThe drainage network is one of the important components in a fluvial system, as Schumm[1] pointed out that three zones compose a typical fluvial system. As early as in the mid 20th century, Horton[2] made a significant quantitative explanation to hydro-geomorphology in a drainage network system. Since the 1960s, Leopold and Langbein have studied the network structure with random walk and entropy, and Shreve, Smart and Scheideger have topologically studied network structure[3-1…     

EFFECTS OF SNOW JAMS ON FLUVIAL ACTIVITIES IN THE HIGH ARCTIC

During break-up in the High Arctic, ice jams are insignificant, but large quantities of snow accumulated in the valleys strongly affect fluvial processes. Near Resolute, Cornwallis Island, many channels were first formed in valley snow drifts and their positions were unstable. Channels carved in the snow can easily accommodate changing discharge by a modification of their width, depth, and velocity. This causes considerable variation in the at-a-station hydraulic geometry relationships.

The availability of sediment is locally restricted by the snow lining along the channels, although some fluvial sediments deposited on the snow revealed that peak flows could entrain very large boulders. Several depositional features observed in the study area also indicated that fluvial activities can extend over a broad zone beyond the confines of the summer channels.

This study suggests that, by increasing discharge, snow jams enhance the erosional power of streams, but by interposing between streamflow and the valley floor, the snow can limit the supply of sediments. Whether the erosional or the protectional tendency dominates will depend upon the snow jam characteristics along various segments of the High Arctic streams.     

Three-dimensional analogue modelling of an alluvial basin margin affected by hydrological cycles: processes and resulting depositional sequences

The dynamics between sediment erosion and accumulation at an alluvial basin margin affected by changes in the surface hydrology are explored using scaled analogue models produced in a flume. The presented results differ from previous counterparts in that accumulation or erosion has not been forced at a spreading outlet, but occurred at a slope change produced by previously accumulated sediment. Cyclical upstream incision produced by increased stream discharge generated incised valleys, and these were subsequently filled by sediment carried by less efficient streams generated during the low discharge period. High resolution mapping using 2.5 mm contour maps allowed the study of sediment accumulation and terrain modelling. The results of three selected experiments are analysed. The only variable explored was discharge. The basin margin was simulated by a ramp inserted in a low sloping flume, consisting of two segments of different slopes selected to emulate high and low efficiency flume fans produced elsewhere. Water and fine‐medium sand entered the ramp along a narrow (0.1 m) channel and flow expanded but without occupying the complete 1.2 m flume width. Flows were highly concentrated and noncohesive. Fan‐like accumulation (slope: 0.11) began during low discharge (LD) periods at the ramp slope break, and proceeded upstream, onlapping quickly at first, but shifting to mostly progradation at the end of the period. High discharges (HD) usually generated two or three incised channels at the beginning of the period, but one of them prevailed and rapidly eroded parts of the LD fan and moved the sediment to a more distal low‐sloping fan (slope: 0.045). Both LD and HD fans passed downstream into a system of small parallel channels resembling a braided alluvial plain ending in sediment lobes. The mapping of the accumulated sediment during the various periods allowed calculation of sediment budgets for the entire flume. The stratal architecture of the deposits was investigated along five parallel trenches cut after experiment termination. The regression analysis of depositional profiles at fan‐like features (expanding flow) and at braided plains (parallel flow) indicated that these fan‐like systems are linear and dependent on applied discharge, while the latter showed an exponential decrease of slope downstream, with a starting value set up by the fan slope. Two main types of stratigraphic units were generated, the LDST and HDST (system tracts). The LDST has a nonerosive base over ‘bedrock’ and the previous HDST, filling proximal erosional topography and prograding as well, generating an onlap–downlap array. Its geometry is highly variable and dependent on pre‐existing topography. The HDST base is an important erosive surface comparable to sequence boundaries. However, there are places without erosion due to a marginal position with respect to the main stream. Indeed, the results suggest that the three‐dimensional variability of erosion and depositional processes might produce very different architectures along the same basin margin.