Two- and three-dimensional inversions of magnetic anomalies in the MARK area (Mid-Atlantic Ridge 23° N)

Magnetic data collected in conjunction with a Sea Beam bathymetric survey of the Mid-Atlantic Ridge south of the Kane Fracture Zone are used to constrain the spreading history of this area over the past 3 Ma. Two-dimensional forward modeling and inversion techniques are carried out, as well as a full three-dimensional inversion of the anomaly field along a 90-km-long section of the rift valley. Our results indicate that this portion of the Mid-Atlantic Ridge, known as the MARK area, consists of two distinct spreading cells separated by a small, zero-offset transform or discordant zone near 23°10′ N, The youngest crust in the median valley is characterized by a series of distinct magnetization highs which coalesce to form two NNE-trending bands of high magnetization, one on the northern ridge segment which coincides with a large constructional volcanic ridge, and one along the southern ridge segment that is associated with a string of small axial volcanos. These two magnetization highs overlap between 23° N and 23°10° N forming a non-transform offset that may be a slow spreading ridge analogue of the small ridge axis discontinuities found on the East Pacific Rise. The crustal magnetizations in this overlap zone are generally low, although an anomalous, ESE-trending magnetization high of unknown origin is also present in this area. The present-day segmentation of spreading in the MARK area was inherited from an earlier ridge-transform-ridge geometry through a series of small (∼ 10 km) eastward ridge jumps. These small ridge jumps were caused by a relocation of the neovolcanic zone within the median valley and have resulted in an overall pattern of asymmetric spreading with faster rates to the west (14 mm yr⁻¹) than to the east (11 mm yr⁻¹). Although the detailed magnetic survey described in this paper extends out to only 3 Ma old crust, a regional compilation of magnetic data from this area by Schoutenet al. (1985) indicates that the relative positions and dimensions of the spreading cells, and the pattern of asymmetric spreading seen in the MARK area during the past 3 Ma, have characterized this part of the Mid-Atlantic Ridge for at least the past 36 Ma.     

Geologic controls of hydrothermal activity in the Mid-Atlantic Ridge rift valley: Tectonics and volcanics

The rift valley at three widely separated sites along the Mid-Atlantic Ridge is characterized using geological and geophysical data. An analysis of bottom photographs and fine-scale bathymetry indicates that each study area has a unique detailed geology and structure. Spreading rates are apparently asymmetric at each site. Relationships between tectonic and volcanic structure and hydrothermal activity show that various stages in the evolution of the rift valley are most favorable for seafloor expression of hydrothermal activity. In a stage found at 26°08 N, site 1 (TAG), the rift valley is narrow, consisting of both a narrow volcanically active valley floor and inner walls with small overall slopes. High-temperature hydrothermal venting occurs along the faster spreading eastern inner wall of this U-shaped rift valley. Site 2 (16°46 N) has a narrow valley floor and wide block faulted walls and is at a stage where the rift valley is characterized by a V-shape. No neovolcanic zone is observed within the marginally faulted, predominantly sedimented floor and hydrothermal activity is not observed. The rift valley at site 3 (14°54 N), with postulated extrusive volcanic activity and a stage in valley evolution tending toward a U-shape, shows evidence of hydrothermal activity within the slightly faster spreading eastern inner wall. Evidence for tectonic activity (inward- and outward-facing faults and pervasive fissuring) exists throughout the wide inner wall. Hydrothermal activity appears to be favored within a U-shaped rift valley characterized by a narrow neovolcanic zone and secondarily faulted inner walls.     

Geologic setting of the Snake Pit hydrothermal site: An active vent field on the Mid-Atlantic Ridge

TheSnake Pit Hydrothermal Site lies on the axis of the Mid-Atlantic Ridge at 23°22′ N latitude, about 30 km south of the Kane Transform Intersection. Active ‘black smoker’ vents and a surrounding field of hydrothermal sediment occur at the crest of a laterally extensive neovolcanic ridge. It is one of the first active hydrothermal vent fields to be found on a slow-spreading ridge axis and despite significant differences in its geologic setting from those of the East Pacific Rise, has many similarities to its fast-spreading counterparts. Although preliminary reports have documented many interesting aspects of these vents and their surroundings, new data collected from the manned submersible ALVIN and the deep-towed ANGUS camera system define the regional tectonic setting as well as the local geologic environment of this fascinating area. The Snake Pit vents are located on a local peak of a volcanic constructional ridge at a depth of 3450 m, 700–800 m deeper than vents known from the East Pacific Rise, Galapagos, or Juan de Fuca spreading centers. The vent field is at least 600 m long and up to 200 m wide and is covered by a thick blanket of greenish to yellow-orange hydrothermal sediment. Both active and extinct vents are perched along the crests of steep-sided sulfide mounds that reach heights of over 40 m. High-temperature (350° C) fluids are vented from black smoker chimneys and low-temperature (226° C) fluids seep from sulphide domes and subordinate anhydrite constructions. Water temperatures, flow rates, fluid chemistries, and mineralization are strikingly similar to vents of faster spreading ridge crests; however, a somewhat distinct fauna inhabit the area.     

The morphology and tectonics of the Mark area from Sea Beam and Sea MARC I observations (Mid-Atlantic Ridge 23° N)

High-resolution Sea Beam bathymetry and Sea MARC I side scan sonar data have been obtained in the MARK area, a 100-km-long portion of the Mid-Atlantic Ridge rift valley south of the Kane Fracture Zone. These data reveal a surprisingly complex rift valley structure that is composed of two distinct spreading cells which overlap to create a small, zero-offset transform or discordant zone. The northern spreading cell consists of a magmatically robust, active ridge segment 40–50 km in length that extends from the eastern Kane ridge-transform intersection south to about 23°12′ N. The rift valley in this area is dominated by a large constructional volcanic ridge that creates 200–500 m of relief and is associated with high-temperature hydrothermal activity. The southern spreading cell is characterized by a NNE-trending band of small (50–200 m high), conical volcanos that are built upon relatively old, fissured and sediment-covered lavas, and which in some cases are themselves fissured and faulted. This cell appears to be in a predominantly extensional phase with only small, isolated eruptions. These two spreading cells overlap in an anomalous zone between 23°05′ N and 23°17′ N that lacks a well-developed rift valley or neovolcanic zone, and may represent a slow-spreading ridge analogue to the overlapping spreading centers found at the East Pacific Rise. Despite the complexity of the MARK area, volcanic and tectonic activity appears to be confined to the 10–17 km wide rift valley floor. Block faulting along near-vertical, small-offset normal faults, accompanied by minor amounts of back-tilting (generally less than 5°), begins within a few km of the ridge axis and is largely completed by the time the crust is transported up into the rift valley walls. Features that appear to be constructional volcanic ridges formed in the median valley are preserved largely intact in the rift mountains. Mass-wasting and gullying of scarp faces, and sedimentation which buries low-relief seafloor features, are the major geological processes occurring outside of the rift valley. The morphological and structural heterogeneity within the MARK rift valley and in the flanking rift mountains documented in this study are largely the product of two spreading cells that evolve independently to the interplay between extensional tectonism and episodic variations in magma production rates.     

南大西洋洋中脊附近沉积物中烃类分布和组成研究

我们利用气相色谱-质谱联用仪(GC-MS)测试了南大西洋洋中脊附近采集的沉积物样品中烃类的分布和组成。通过分析发现,样品中烃类表现出明显的双峰分布,同时明显的富集3-甲基烷烃、8-甲基烷烃以及2,4,(n-1)-三甲基烷烃,这可能是海底微生物代谢作用的结果。样品中也富集萜烷、藿烷和甾烷等生物标志物,这也支持样品中烃类主要为微生物来源的观点。样品中沥青和烃类显示出距离热液区近的2V-TVG10和26V-TVG05站位含量高,而距离热液区远的22IV-TVG01、22V-TVG11和22V-TVG14站位含量低的趋势,暗示出样品中沥青以及烃类的分布和组成可能受到海底热液活动的影响。     

南大西洋洋中脊调查区小型底栖生物丰度和生物量研究

“大洋一号”调查船于2011年5—6月在南大西洋中脊14°S附近进行了7个站位的小型底栖生物采样。共鉴定出小型底栖生物10个类群。小型底栖生物平均丰度为(60.63±54.77) ind/10 cm²,平均干重生物量为(9.42±8.92) μg/10 cm²。线虫是其中的优势类群,丰度为(47.42±47.99)ind/10 cm²,占总丰度的78.21%,另外,肉鞭动物和桡足类分别占总丰度的16.63%和3.91%。生物量前3位的类群依次为桡足类、线虫和肉鞭动物。小型底栖生物密度随沉积物深度增加而减少,约73.55%的生物丰度分布在0～2 cm层内。个体大小方面,有75.32%的小型底栖生物粒径处于32～125 μm范围内。     

Extensional faulting and segmentation of the Mid-Atlantic Ridge north of the Kane Fracture Zone (24° 00′ N to 24° 40′ N)

The combination of multi-beam echo-sounder swath bathymetry and high-resolution deep-towed sidescan sonar provides a powerful database from which to examine mid-ocean ridge processes. We have used such a database, gathered from the Mid-Atlantic Ridge north of the Kane Fracture Zone (the MARNOK area), to examine the relationship between tectonic, volcanic, and bathymetric segmentation. We have identified structural domains, with different fault distributions, and neovolcanic segments that are distinct from the 2nd or 3rd order bathymetric segmentation.From their mutual relationships, a model is proposed for the magmatic accretion of oceanic crust at slow spreading ridges that relates the local melt supply to the tectonic style. We suggest that these are mutually interactive, and determine whether volcanic extrusion along the ridge is continuous and slow, or episodic and rapid.     

南大西洋沉积物中多环芳香化合物的组成特征研究

10 samples of sediments obtained from the South Mid-Atlantic Ridge were measured for the abundances and distributions of polycyclic aromatic compounds(PAHs). The total concentrations of PAHs(∑PAHs) ranged from 2.768 to 9.826 μg/g dry sediment. The ∑PAHs was higher in sample 22V-TVG10 and sample 26V-TVG05 which were close to hydrothermal fields, with the lowest value in sample 22V-TVG14 which was farthest from hydrothermal fields, suggesting a probable hydrothermal origin of ∑PAHs of samples. Approximately nine kinds of PAHs were identified, and low molecular mass tricyclic and tetracyclic aromatic compounds were predominant in the samples. The concentrations of fluoranthene which were typical as hydrothermal alteration compounds were the highest among PAHs with dry weight between 0.913–3.157 μg/g. The phenanthrene homologue was most abundant in the samples, and the ratios between parent phenanthrene and methylphenanthrene which probably reflected the degree of hydrothermal alteration ranged from 0.097 to 1.602. The sample 22V-TVG10 possessing a maximum ratio value showed the intense influence of the hydrothermal alteration on this sample, which might further imply that PAHs in sediments were mainly derived from the hydrothermal alteration.     

Structure and Stability of Non-Transform Discontinuities on the Mid-Atlantic Ridge between 24° N and 30° N

Observations of the median valley within the 24–30° N area ofthe Mid-Atlantic Ridge (MAR), using the IOSDL high resolutionside-scan sonar instrument TOBI, image four separate areas of themedian valley, containing part or all of nine spreading segments, and fivenon-transform discontinuities between spreading segments (NTDs).These high resolution side scan images were interpreted in parallel withmultibeam bathymetry (Purdy et al., 1990), giving a greater degree ofstructural precision than is possible with the multibeam data alone. Threedistinct types of NTD were identified, corresponding in part to typespreviously identified from the multibeam bathymetric survey of the area.Type 1 NTDs are termed septal offsets, and are marked by a topographic ridgeseparating the two spreading segments. The offset between the spreadingsegments ranges from 9 to 14 km. These can be further subdivided into Type1A in which the septa run parallel to the overall trend of the MAR and Type1B in which the septa lie at a high angle to the bulk ridge trend. Type 1ANTDs are characterised by overlap of the neovolcanic zones of the segmentson each side, and strong offaxis traces, while Type 1B NTDs show no overlapof neovolcanic zones, and weak offaxis traces. Type 2 NTDs arebrittle/ductile extensional shear zones, marked by oblique extensionalfractures, and associated with rotation of tectonic and volcanic structuresaway from the overall trend of the MAR. Type 3 NTDs are associated withoffsets of less than 5 km, and show no sign of any accommodating structure.In this type of NTD, the offset zone is covered with undeformed volcanics.The type of NTD developed at any locality along the ridge axis appears todepend on the amount of segment offset and segment overlap, the overalltrend of the mid-ocean ridge, the width of the zone of discontinuity, themedian valley offset and the longevity of the offset. These factorsinfluence the mechanical properties of the lithosphere across thediscontinuity, and ultimately the tectonic style of the NTD that can besupported. Thus brittle/ductile extensional shear zones are long-livedstructures favoured by large segment offsets, and small or negative segmentoverlaps. Septa can be short or long lived, and are associated with largesegment offsets. Segment overlaps vary from negative (an along axis gap) tozero, for Type 1B septal offsets, or positive to zero for Type 1A septaloffsets. Non-tectonised NTDs are generally short lived structures,characterised by small segment offsets and zero or positive overlaps.     

Spreading-rate dependence of hydroacoustic and teleseismic seismicity of ridge-transform systems: East Pacific Rise,Galapagos Ridge,and Mid-Atlantic Ridge

Seismicity in ocean ridge-transform systems reveals fundamental processes of mid-ocean ridges, while comparisons of seismicity in different oceans remain rare due to a lack of detection of small events. From 1996 to2003, the Pacific Marine Environmental Laboratory of the National Oceanic and Atmospheric Administration(NOAA/PMEL) deployed several hydrophones in the eastern Pacific Ocean and the northern Atlantic Ocean.These hydrophones recorded earthquakes with small magnitudes, providing us with...     

Fault scarp identification in side-scan sonar and bathymetry images from the Mid-Atlantic Ridge using wavelet-based digital filters

Digital filters designed using wavelet theory are applied to high resolution deep-towed side-scan sonar data from the median valley walls, crestal mountains, and flanks of the Mid-Atlantic Ridge at 29°10 N. With proper tuning, the digital filters are able to identify the location, orientation, length, and width of highly reflective linear features in sonar images. These features are presumed to represent the acoustic backscatter from axis-facing normal faults. The fault locations obtained from the digital filters are well correlated with visual geologic interpretation of the images. The side-scan sonar images are also compared with swath bathymetry from the same area. The digitally filtered bathymetry images contain nine of the eleven faults identified by eye in the detailed geologic interpretation of the side-scan data. Faults with widths (measured perpendicular to their strike) of less than about 150 m are missed in the bathymetry analysis due to the coarser resolution of these data. This digital image processing technique demonstrates the potential of wavelet-based analysis to reduce subjectivity and labor involved in mapping and analyzing topographic features in side-scan sonar and bathymetric image data.     

Spatial and temporal variability of crustal magnetization of a slowly spreading ridge: Mid-Atlantic Ridge (20°–24° N)

The results of the two- and three-dimensional magnetic inversions performed on data located between 20°–24° N on the Mid-Atlantic Ridge indicate the crustal magnetization has decayed exponentially for the last 10 Ma, and that this decay has been fairly symmetric about the ridge axis. After removal of the mean temporal decay, the residual field is characterized by more positive magnetizations at the second-order discontinuities, regardless of initial magnetization direction. A model that involves the preferential emplacement of serpentinized lithologies near the discontinuities is proposed to explain this correlation. The temporal detrending method also indicates that several ridge-parallel depressions located on the flanks of the ridge axis are regions of more positive magnetizations. These bathymetric depressions may mark the locations of detachment faulting that occurred during amagmatic periods of extension. The general symmetry of the crustal magnetization about the ridge axis does not support the occurrence of continuous detachment faulting proposed to correspond to the inner and outer corners of ridge axis discontinuities.     

The Mid-atlantic Ridge (31°S–34°30′S): Temporal and spatial variations of accretionary processes

The ridge located between 31° S and 34°30′S is spreading at a rate of 35 mm yr⁻¹, a transitional velocity between the very slow (≤20 mm yr⁻¹) opening rates of the North Atlantic and Southwest Indian Oceans, and the intermediate rates (60 mm yr⁻¹) of the northern limb of the East Pacific Rise, and the Galapagos and Juan de Fuca Ridges. A synthesis of multi-narrow beam, magnetics and gravity data document that in this area the ridge represents a dynamically evolving system. Here the ridge is partitioned into an ensemble of six distinct segments of variable lengths (12 to 100 km) by two transform faults (first-order discontinuities) and three small offset (< 30 km) discontinuities (second-order discontinuities) that behave non-rigidly creating complex and heterogeneous morphotectonic patterns that are not parallel to flow lines. The offset magnitudes of both the first and second-order discontinuities change in response to differential asymmetric spreading. In addition, along the fossil trace of second-order discontinuities, the lengths of abyssal hills located to either side of a discordant zone are observed to lengthen and shorten creating a saw-toothed pattern. Although the spreading rate remains the same along the length of the ridge studied, the morphology of the spreading segments varies from a deep median valley with characteristics analogous to the rift segments of the North Atlantic to a gently rifted axial bulge that is indistinguishable from the shape and relief of the intermediate rate spreading centers of the East Pacific Rise (i.e., 21°N). Like other carefully surveyed ridge segments at slow and fast rates of accretion, the along-axis profiles of each ridge segment are distinctly convex upwards, and exhibit along-strike changes in relief of 500m to 1500 between the shallowest portion of the segment (approximate center) and the segment ends. Such spatial variations create marked along-axis changes in the morphology and relief of each segment. A relatively low mantle Bouguer anomaly is known to be associated with the ridge segment characterized by a gently rifted axial bulge and is interpreted to indicate the presence of focused mantle upwelling (Kuo and Forsyth, 1988). Moreover, the terrain at the ends of each segment are known to be highly magnetized compared to the centers of each segment (Carbotte et al, 1990). Taken together, these data clearly establish that these profound spatial variations in ridge segment properties between adjoining segments, and along and across each segment, indicate that the upper mantle processes responsible for the formation of this contrasting architecture are not solely related to passive upwelling of the asthenosphere beneath the ridge axis. Rather, there must be differences in the thermal and mechanical structure of the crust and upper mantle between and along the ridge segments to explain these spatial variations in axial topography, crustal structure and magnetization. These results are consistent with the results of investigations from other parts of the ridge and suggest that the emplacement of magma is highly focused along segments and positioned beneath the depth minimum of a given segment. The profound differences between segments indicate that the processes governing the behavior of upwelling mantle are decoupled and the variations in the patterns of axis flanking morphology and rate of accretion indicate that processes controlling upwelling and melt production vary markedly in time as well. At this spreading rate and in this area, the accretionary processes are clearly three-dimensional. In addition, the morphology of a ridge segment is not governed so much by opening rate as by the thermal structure of the mantle which underlies the segment.     

Utilization of high resolution satellite gravity over the Carlsberg Ridge

The Carlsberg Ridge lies between the equator and the Owen fracture zone. It is the most prominent mid-ocean ridge segment of the western Indian Ocean, which contains a number of earthquake epicenters. Satellite altimetry can be used to infer subsurface geological structures analogous to gravity anomaly maps generated through ship-borne survey. In this study, free-air gravity and its 3D image have been generated over the Carlsberg Ridge using a very high resolution data base, as obtained from Geosat GM, ERS-1, Seasat and TOPEX/POSEIDON altimeter data. As observed in this study, the Carlsberg Ridge shows a slow spreading characteristic with a deep and wide graben (average width ∼15 km). The transform fault spacing confirms variable slow to intermediate characteristics with first and second order discontinuities. The isostatically compensated region of the Carlsberg Ridge could be demarcated with near zero contour values in the free-air gravity anomaly images over and along the Carlsberg Ridge axes and over most of the fracture zone patterns. Few profiles have been generated across the Carlsberg Ridge and the characteristics of slow/intermediate spreading ridge of various orders of discontinuity could be identified. It has also been observed in zero contour image as well as in the characteristics of valley patterns along the ridge from NW to SE that different spreading rates, from slow to intermediate, are occurring in different parts of the Carlsberg ridge. It maintains the morphology of a slow spreading ridge in the NW, where the wide and deep axial valley (∼1.5–3 km) also implies the pattern of a slow spreading ridge. However, a change in the morphology/depth of the axial valley from NW to SE indicates the nature of the Carlsberg Ridge as a slow to intermediate spreading ridge. For the prevailing security restrictions, lat./lon. coordinates have been omitted in few images.     

Lecithotrophic nauplius of the family Dirivultidae (Copepoda; Siphonostomatoida) hatched on board over the Mid-Atlantic Ridge (5°S)

Abstract A copepod nauplius of the family Dirivultidae Humes & Dojiri 1980 is described for the first time. The lecithotrophic nauplius of the widespread symbiotic copepod Stygiopontius pectinatus Humes 1987 was released from females bearing paired egg sacs that included only one yolky embryo each. The ovigerous females of S. pectinatus were washed from the branchial chamber of alvinocaridid shrimps ( Rimicaris exoculata Williams & Rona 1986 ) collected at a deep-sea hydrothermal field on the Mid-Atlantic Ridge at 5° S (Red Lion site, chimney 'Shrimps Farm', depth 3,048 m) by ROV Quest 4000 and maintained in a laboratory on the R/V METEOR (cruise M64/1, 2005). The nauplius of S. pectinatus , appears to be a stage I nauplius because it bears only one pair of caudal setae and the setose bud of maxilla 1 is absent. Like nauplii of other copepods of the order Siphonostomatoida, this nauplius of S. pectinatus possesses a reduced labrum and the body is filled with yolky granules; it also lacks a masticatory process on the antennal coxa. The presence of two inner setae (instead of one seta) on the mandibular endopod is hypothesized to be a primitive character of dirivultids that distinguishes them from the remaining siphonostomatoid genera. The Dirivultidae is a widespread and diverse family of copepods endemic to the deep-sea hydrothermal vents of the Pacific and Atlantic Oceans. Morphological features of the planktonic nauplius of S. pectinatus suggest nutritional independence during their dispersal.     

Mineralogical characteristics of polymetallic sulfides from the Deyin-1 hydrothermal field near 15°S,southern Mid-Atlantic Ridge

A seafloor hydrothermal field, named Deyin-1 later, near 15°S southern Mid-Atlantic Ridge(SMAR) was newly found during the 22 nd cruise carried out by the China Ocean Mineral Resources Research Development Association(COMRA). Sulfide samples were collected at three stations from the hydrothermal field during the26 th cruise in 2012. In this paper, mineralogical characteristics of the sulfides were analyzed with optical microscope, X-ray diffractometer, scanning electron microscope and electron microprobe to study the crystallization sequence of minerals and the process of hydrothermal mineralization. According to the difference of the ore-forming metal elements, the sulfide samples can be divided into three types:(1) the Ferich sulfide, which contains mainly pyrite and chalcopyrite;(2) the Fe-Cu-rich sulfide consisting predominantly of pyrite, chalcopyrite and isocubanite, with lesser amount of sphalerite, marmatite and pyrrhotine; and(3) the Fe-Zn-rich sulfide dominated by pyrite, sphalerite and marmatite, with variable amounts of chalcopyrite, isocubanite, pyrrhotine, marcasite, galena and gratonite. Mineral precipitations in these sulfides are in the sequence of chalcopyrite(isocubanite and possible coarse pyrite), fine pyrite,sphalerite(marmatite), galena, gratonite and then the minerals out of the dissolution. Two morphologically distinct generations(Py-I and Py-II) of pyrite are identified in each of the samples; inclusions of marmatite tend to exist in the coarse pyrite crystals(Py-I). Sphalerite in the Fe-Zn-rich sulfide is characterized by a"chalcopyrite disease" phenomenon. Mineral paragenetic relationships and a wide range of chemical compositions suggest that the environment of hydrothermal mineralization was largely changing. By comparison, the Fe-rich sulfide was formed in a relatively stable environment with a high temperature, but the conditions for the formation of the Fe-Cu-rich sulfide were variable. The Fe-Zn-rich sulfide was precipitated during the hydrothermal venting at relatively low temperature.     

Distribution and spatial variation of hydrothermal faunal assemblages at Lucky Strike (Mid-Atlantic Ridge) revealed by high-resolution video image analysis

Whilst the fauna inhabiting hydrothermal vent structures in the Atlantic Ocean is reasonably well known, less is understood about the spatial distributions of the fauna in relation to abiotic and biotic factors. In this study, a major active hydrothermal edifice (Eiffel Tower, at 1690 m depth) on the Lucky Strike vent field (Mid-Atlantic Ridge (MAR)) was investigated. Video transects were carried out by ROV Victor 6000 and complete image coverage was acquired. Four distinct assemblages, ranging from dense larger-sized Bathymodiolus mussel beds to smaller-sized mussel clumps and alvinocaridid shrimps, and two types of substrata were defined based on high definition photographs and video imagery. To evaluate spatial variation, faunal distribution was mapped in three dimensions. A high degree of patchiness characterizes this 11 m high sulfide structure. The differences observed in assemblage and substratum distribution were related to habitat characteristics (fluid exits, depth and structure orientation). Gradients in community structure were observed, which coincided with an increasing distance from the fluid exits. A biological zonation model for the Eiffel Tower edifice was created in which faunal composition and distribution can be visually explained by the presence/absence of fluid exits.     

Variations in deep-sea hydrothermal vent communities on the Mid-Atlantic Ridge near the Azores plateau

Near the Azores Triple Junction as the Azores Plateau is approached, the ridge axis becomes shallower; its depth decreases from ca. 2400 m in the Rainbow vent field (36°13′N) to ca. 850 m in the Menez Gwen vent field (37°35′N). In this area, extensive mussel beds of the mytilid Bathymodiolus azoricus dominate the hydrothermal vent fauna, along with populations of three shrimps (Rimicaris exoculata, Mirocaris fortunata and Chorocaris chacei). The main physical and chemical characteristics of the vent habitat were studied by discrete sampling, in situ analysis and sediment trap moorings. The vent fauna is distributed along a variable band where the vent fluids and seawater mix, with R. exoculata living in the most concentrated areas and Bathymodiolus azoricus in the most diluted zones. Various non-endemic species live at the border of the vent field. The variations observed in structure and composition of the communities along the depth gradient are most likely due to changes in vent fluid toxicity (metallic and sulphide content) and suspended mineral particles, which render the fluids harsher for species living there. The main faunal differences observed between Lucky Strike and Menez Gwen hydrothermal fields are due to an impoverishment in the hydrothermal endemic species and to the penetration of bathyal species. The comparison of the three studied vent fields suggests the existence of a succession of several biogeographic islands rather than a single province.     

Bathymetry of the mid-atlantic ridge, 24°-31°N: A map series

This paper presents a series of eleven maps of the bathymetry of a 900 km long section of the crestal region of the Mid-Atlantic Ridge. Along with a twelfth key map, this series defines the morphology of fifteen discrete spreading segments and shows convincingly that no transform faults exist between the Kane and Atlantis fracture zones. The publication of these multi beam bathymetry data with a contour interval of 50 m and at a scale of 30 inches per degree of longitude is intended to allow easy access by a broad community of marine earth scientists to this unique and powerful data set.