The Herschel effect and solar photography

A method of photographing the solar image in the UV part of the solar spectrum is described. The resulting images show the bright photospheric network of Sheeley and Chapman; these have been recorded at the small central distance of 20°. During a flare of importance 1b near a spot group, no detectable changes in the spots, their relative positions or the bright photospheric network could be observed.     

The Herschel PACS photometer calibration

We present a flux calibration scheme for the PACS chopped point-source photometry observing mode based on the photometry of five stellar standard sources. This mode was used for science observations only early in the mission. Later, it was only used for pointing and flux calibration measurements. Its calibration turns this type of observation into fully validated data products in the Herschel Science Archive. Systematic differences in calibration with regard to the principal photometer observation mode, the scan map, are derived and amount to 5 ? 6 %. An empirical method to calibrate out an apparent response drift during the first 300 Operational Days is presented. The relative photometric calibration accuracy (repeatability) is as good as 1 % in the blue and green band and up to 5 % in the red band. Like for the scan map mode, inconsistencies among the stellar calibration models become visible and amount to 2 % for the five standard stars used. The absolute calibration accuracy is therefore mainly limited by the model uncertainty, which is 5 % for all three bands.     

The seeing at the William Herschel Telescope

We present results from a study of the seeing quality at the 4.2-m William Herschel telescope at La Palma. The median intrinsic seeing at the site is found to be excellent, and is comparable to that at the Paranal and Mauna Kea observatories. Contributions to the seeing from turbulence within the telescope dome are insignificant. Furthermore, the optical quality and tracking stability of the telescope are good, so that long-exposure image widths close to the limit imposed by the site seeing can be expected.     

The Footprint Database and Web Services of the Herschel Space Observatory

Data from the Herschel Space Observatory is freely available to the public but no uniformly processed catalogue of the observations has been published so far. To date, the Herschel Science Archive does not contain the exact sky coverage (footprint) of individual observations and supports search for measurements based on bounding circles only. Drawing on previous experience in implementing footprint databases, we built the Herschel Footprint Database and Web Services for the Herschel Space Observatory to provide efficient search capabilities for typical astronomical queries. The database was designed with the following main goals in mind: (a) provide a unified data model for meta-data of all instruments and observational modes, (b) quickly find observations covering a selected object and its neighbourhood, (c) quickly find every observation in a larger area of the sky, (d) allow for finding solar system objects crossing observation fields. As a first step, we developed a unified data model of observations of all three Herschel instruments for all pointing and instrument modes. Then, using telescope pointing information and observational meta-data, we compiled a database of footprints. As opposed to methods using pixellation of the sphere, we represent sky coverage in an exact geometric form allowing for precise area calculations. For easier handling of Herschel observation footprints with rather complex shapes, two algorithms were implemented to reduce the outline. Furthermore, a new visualisation tool to plot footprints with various spherical projections was developed. Indexing of the footprints using Hierarchical Triangular Mesh makes it possible to quickly find observations based on sky coverage, time and meta-data. The database is accessible via a web site http://herschel.vo.elte.hu and also as a set of REST web service functions, which makes it readily usable from programming environments such as Python or IDL. The web service allows downloading footprint data in various formats including Virtual Observatory standards.     

Investigating Clusters of Galaxies with Planck and Herschel

With the Planck and Herschel satellite missions of the European Space Agency, the far-infrared and submillimeter window will offer new investigation tools toward clusters of galaxies in the distant Universe. These are the Sunyaev Zel'dovich (SZ) effect of the cosmic microwave background and the thermal emission of dust grains. The power of the SZ effect is such that Planckis expected to discover thousands of new clusters at redshifts larger than 0.2, where only a few tens are known today. The dust can be present at large scale in the intracluster medium, and we show that even at very low abundances it is able to be a major cooling agent for the whole cluster. However the dominating dust emission will be that of the background infrared star forming galaxies. In all cases, the data processing of space borne sensitive submillimeter observations of clusters of galaxies such as the one that Planck and Herschel will provide, will require a very carefull combined analysis of the SZ effect and dust thermal emission.     

The effect of sideband ratio on line intensity for Herschel/HIFI

The Heterodyne Instrument for the Far Infrared (HIFI) on board the Herschel Space Observatory is composed of a set of fourteen double sideband mixers. We discuss the general problem of the sideband ratio (SBR) determination and the impact of an imbalanced sideband ratio on the line calibration in double sideband heterodyne receivers. The HIFI SBR is determined from a combination of data taken during pre-launch gas cell tests and in-flight. The results and some of the calibration artefacts discovered in the gas cell test data are presented here along with some examples of how these effects appear in science data taken in orbit.     

Observations of Low Frequency Solar Radio Bursts from the Rosse Solar-Terrestrial Observatory

The Rosse Solar-Terrestrial Observatory (RSTO; www.rosseobservatory.ie ) was established at Birr Castle, Co. Offaly, Ireland (53°05′38.9″, 7°55′12.7″) in 2010 to study solar radio bursts and the response of the Earth’s ionosphere and geomagnetic field. To date, three Compound Astronomical Low-cost Low-frequency Instrument for Spectroscopy in Transportable Observatory (CALLISTO) spectrometers have been installed, with the capability of observing in the frequency range of 10?–?870 MHz. The receivers are fed simultaneously by biconical and log-periodic antennas. Nominally, frequency spectra in the range of 10?–?400 MHz are obtained with four sweeps per second over 600 channels. Here, we describe the RSTO solar radio spectrometer set-up, and present dynamic spectra of samples of type II, III and IV radio bursts. In particular, we describe the fine-scale structure observed in type II bursts, including band splitting and rapidly varying herringbone features.     

The XMM‐Newton view of magnetars

Anomalous X‐ray Pulsars and Soft Gamma‐ray Repeaters are believed to be magnetars: isolated neutron stars powered by the decay of extremely high magnetic fields. We review some of the main results obtained with XMM‐Newton and discuss the prospects for future observations of this small but extremely interesting class of objects. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Herschel Investigation of Cores and Filamentary Structures in the Perseus Molecular Cloud

Cores and filamentary structures are the prime birthplaces of stars,and play key roles in the process of star formation.Latest advances in the methods of multi-scale source and filament extraction,and in making highresolution column density map from Herschel multi-wavelength observations enable us to detect the filamentary network structures in highly complex molecular cloud environments.The statistics for physical parameters shows that core mass strongly correlates with core dust temperature,an...     

XMM‐Newton: The next decade

Some key numbers about the XMM‐Newton users, usage of the mission and the scientific outcome are provided. The background for selecting the topic, the preparation work, the organization and the corresponding committees are briefly described. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

The Convergence of Newton–Raphson Iteration with Kepler's Equation

Conway (Celest. Mech. 39, 199–211, 1986) drew attention to the circumstance that when the Newton–Raphson algorithm is applied to Kepler's equation for very high eccentricities there are certain apparently capricious and random values of the eccentricity and mean anomaly for which convergence seems not to be easily reached when the starting guess for the eccentric anomaly is taken to be equal to the mean anomaly. We examine this chaotic behavior and show that rapid convergence is always reached if the first guess for the eccentric anomaly is π. We present graphs and an empirical formula for obtaining an even better first guess. We also examine an unstable situation where iterations oscillate between two in correct results until the instability results in sudden convergence to the unique correct solution. This revised version was published online in July 2006 with corrections to the Cover Date.     

Herschel SPIRE fourier transform spectrometer: calibration of its bright-source mode

The Fourier Transform Spectrometer (FTS) of the Spectral and Photometric Imaging REceiver (SPIRE) on board the ESA Herschel Space Observatory has two detector setting modes: (a) a nominal mode, which is optimized for observing moderately bright to faint astronomical targets, and (b) a bright-source mode recommended for sources significantly brighter than 500 Jy, within the SPIRE FTS bandwidth of 446.7–1544 GHz (or 194–671 microns in wavelength), which employs a reduced detector responsivity and out-of-phase analog signal amplifier/demodulator. We address in detail the calibration issues unique to the bright-source mode, describe the integration of the bright-mode data processing into the existing pipeline for the nominal mode, and show that the flux calibration accuracy of the bright-source mode is generally within 2 % of that of the nominal mode, and that the bright-source mode is 3 to 4 times less sensitive than the nominal mode.     

The local far-infrared galaxy colour–luminosity distribution: a reference for BLAST and Herschel/SPIRE submillimetre surveys

We measure the local galaxy far-infrared (FIR) 60 to 100 μm colour–luminosity distribution using an all-sky IRAS survey. This distribution is an important reference for the next generation of FIR–submillimetre surveys that have and will conduct deep extragalactic surveys at 250–500 μm. With the peak in dust-obscured star-forming activity leading to present-day giant ellipticals now believed to occur in submillimetre galaxies near   z ∼ 2.5  , these new FIR–submillimetre surveys will directly sample the spectral energy distributions of these distant objects at rest-frame FIR wavelengths similar to those at which local galaxies were observed by IRAS . We have taken care to correct for the temperature bias and the evolution effects in our IRAS 60-μm-selected sample. We verify that our colour–luminosity distribution is consistent with the measurements of the local FIR luminosity function, before applying it to the higher redshift Universe. We compare our colour–luminosity correlation with recent dust–temperature measurements of submillimetre galaxies and find evidence for pure luminosity evolution of the form  (1 + z )³  . This distribution will be useful for the development of evolutionary models for Balloon-borne Large Aperture Submillimeter Telescope (BLAST) and Spectral and Photometric Imaging Receiver (SPIRE) surveys as it provides a statistical distribution of the rest-frame dust temperatures for galaxies as a function of luminosity.