Sedimentary facies and landform genesis at a temperate outlet glacier: Soler Glacier, North Patagonian Icefield

This paper focuses on the structural glaciology, dynamics, debris transport paths and sedimentology of the forefield of Soler Glacier, a temperate outlet glacier of the North Patagonian Icefield in southern Chile. The glacier is fed by an icefall from the icefield and by snow and ice avalanches from surrounding mountain slopes. The dominant structures in the glacier are ogives, crevasses and crevasse traces. Thrusts and recumbent folds are developed where the glacier encounters a reverse slope, elevating basal and englacial material to the ice surface. Other debris sources for the glacier include avalanche and rockfall material, some of which is ingested in marginal crevasses. Debris incorporated in the ice and on its surface controls both the distribution of sedimentary facies on the forefield and moraine ridge morphology. Lithofacies in moraine ridges on the glacier forefield include large isolated boulders, diamictons, gravel, sand and fine-grained facies. In relative abundance terms, the dominant lithofacies and their interpretation are sandy boulder gravel (ice-marginal), sandy gravel (glaciofluvial), angular gravel (supraglacial) and diamicton (basal glacial). Proglacial water bodies are currently developing between the receding glacier and its frontal and lateral moraines. The presence of folded sand and laminites in moraine ridges in front of the glacier suggests that, during a previous advance, Soler Glacier over-rode a former proglacial lake, reworking lacustrine deposits. Post-depositional modification of the landform/sediment assemblage includes melting of the ice-core beneath the sediment cover, redistribution of finer material across the proglacial area by aeolian processes and fluvial reworking. Overall, the preservation potential of this landform/sediment assemblage is high on the centennial to millennial timescale.     

Common origin for De Geer moraines of variable composition in Raudvassdalen,northern Norway

The study of De Geer moraines in Raudvassdalen shows that most De Geer moraines are likely to have a common origin at the grounding line of glaciers despite variability in composition of the ridges. Pebble fabric, grain‐size analysis and structures within exposures of De Geer moraines in the Raudvassdalen area, with compositions ranging from mostly till to mostly sorted sediment, indicate that the ridges all formed at the grounding line of a tidewater glacier by common processes: deposition of sorted sediments beyond the grounding line followed by deformation of pre‐existing sediments and deposition of till as the glacier overrode the ridges. The compositional variation of the ridges is probably related to the position of the section studied relative to the location of the outlet of subglacial streams. Ridges composed entirely of till form at locations remote from the outlet of subglacial streams, and ridges with a component of sorted sediments form in closer proximity to these streams. This unifying theory of De Geer moraine formation, along with theoretical and geological evidence showing that there are limited physical conditions where basal crevasses can form, suggests that the number of De Geer moraines interpreted to have formed in basal crevasses is probably unrealistic. Copyright © 2000 John Wiley & Sons, Ltd.     

Glaciodynamically upthrusted bands of englacially transported debris in the Pleistocene of central Poland

Two kinds of buried structures are described from Dzirżenin, north-east of Warsaw, where they occur within a glaciofluvial landform: (1) narrow till ridges, showing vertically oriented structures, excavated from stratified gravel and sands; and (2) a narrow vertical zone of massive gravelly/sandy material, involving vertically oriented lens-like layers composed of massive sand with pebbles, or of diamicton. The gravelly/sandy zone is also closely surrounded by stratified glaciofluvial sediments. In spite of their vertical position and internal deformation, the till ridges and gravelly/sandy zone show non-tectonic contacts with the surrounding, stratified, undisturbed sediments. The glaciofluvial sediments that occur immediately next to the structures under discussion are characterized by the occurrence of comparatively coarse material and interbeddings of diamicton, which wedge out away from these structures. The gravelly/sandy zone separates different kinds of water-laid deposits. The buried structures are interpreted as former debris-laden bands, thrust upwards within the frontal part of the ice sheet and then transformed into still-frozen debris ridges projecting over the already dead ice. Further melting of the decaying ice resulted in abundant glaciofluvial sedimentation, and the debris ridges also supplied material for the deposition of the neighbouring stratified deposits. One of the ridges separated different glaciofluvial environments. The glaciofluvial sediments completely buried the ice-cemented ridges, which were finally transformed by a melting-out process into the till ridges and the gravelly/sandy zone. The former are interpreted as having been transformed from upturned debris-laden bands with a high concentration of debris or from the bands composed of frozen-up sediment slabs. The gravelly/sandy zone is interpreted as having (most probably) been deposited from upturned bands characterized by a lesser concentration of debris.     

Marginal formation of De Geer moraines and their implications to the dynamics of grounding‐line recession

De Geer moraine ridges occur in abundance in the coastal zone of northern Sweden, preferentially in areas with proglacial water depths in excess of 150 m at deglaciation. From detailed sedimentological and structural investigations in machine‐dug trenches across De Geer ridges it is concluded that the moraines formed due to subglacial sediment advection to the ice margin during temporary halts in grounding‐line retreat, forming gradually thickening sediment wedges. The proximal part of the moraines were built up in submarginal position as stacked sequences of deforming bed diamictons, intercalated with glaciofluvial canal‐infill sediments, whereas the distal parts were built up from the grounding line by prograding sediment gravity‐flow deposits, distally interfingering with glaciolacustrine sediments. The rapid grounding‐line retreat (ca. 400 m yr^?1) was driven by rapid calving, in turn enhanced by fast iceflow and marginal thinning of ice due to deforming bed conditions. The spatial distribution of the moraine ridges indicates stepwise retreat of the grounding line. It is suggested that this is due to slab and flake calving of the ice cliff above the waterline, forming a gradually widening subaqueous ice ledge which eventually breaks off to a new grounding line, followed by regained sediment delivery and ridge build‐up. Copyright © 2005 John Wiley & Sons, Ltd.     

Deglaciation and glacial lake development in the Kaamasjoki river basin, Finnish Lapland

The glacial hydrology of the meltwaters of the ice sheet during deglaciation in a large river basin has been reconstructed on the basis of heights of thresholds and saddles of bedrock topography, glaciofluvial accumulation forms (eskers, deltas and plains of sorted material) and erosional landforms (drainage channels and shorelines) as well as a few terminal moraines. The water level of glacial lake dropped in several stages. The lake existed and deglaciation took place before 9740±280 years B.P. The deglaciation took place at a much faster rate in the studied region than later in western Lapland.     

Genesis of transverse kame trains in eastern Poland

Transverse kames, forming trains perpendicular to the direction of ice-sheet advance, are rare morphological elements in previously glaciated areas. The genesis of an example from the ice-contact zone of the Wartanian glaciation in eastern Poland is discussed. The transverse kames there form two main, distinctly separated, sub-parallel trains. Their sedimentary successions fill erosional troughs incised in the pre-Wartanian deposits on northern slopes. They consist of thick glaciofluvial sand and glaciofluvial/glaciolacustrine sandy/silty units that are covered with a thin, usually discontinuous, glacial till succession. The genesis of this kame type has been modelled. It is concluded that transverse kames developed in two phases: (1) erosion of the substratum in subglacial channels during initial deglaciation, and (2) glaciofluvial deposition in crevasses during advanced deglaciation (in the form of low-energy fans periodically submerged under stagnant water), followed locally by a cover of flowtills. Both the ablation of the ice and the accumulation of the kame deposits were controlled by the co-occurrence of ice zones either enriched or impoverished with sediment. Zonal enrichment of ice with debris was determined by the development of shear zones over substratum elevations that were inclined up-ice. The formation and subsequent infilling of crevasses both took place in zones of relatively clean ice, so that the resulting kames form a train perpendicular to the direction of ice movement.     

Re-interpretation of ‘hummocky moraine’ in the Gaick,Scotland, as erosional remnants: Implications for palaeoglacier dynamics

Many glaciated valleys in Scotland contain distinctive, closely spaced ridges and mounds, which have been termed ‘hummocky moraine’. The ridges and mounds are widely interpreted as ice-marginal moraines, constructed during active retreat of mainly temperate glaciers. However, hummocky terrain can form by various processes in glacial environments, and it may relate to a range of contrasting glaciodynamic regimes. Thus, detailed geomorphological and sedimentological studies of hummocky surfaces in Scottish glaciated valleys are important for robust interpretations of former depositional environments and glacier dynamics. In this contribution, we examine irregularly shaped ridges and mounds that occur outside the limits of former Loch Lomond Readvance (≈ Younger Dryas; ~ 12.9–11.7 ka) glaciers in the Gaick, Central Scotland. These ridges and mounds are intimately associated with series of sinuous channels, and their planform shape mimics the form of the adjacent channels. Available exposures through ridges in one valley reveal that those particular ridges contain lacustrine, subglacial, and glaciofluvial sediments. The internal sedimentary architecture is not related to the surface morphology; thus, we interpret the irregularly shaped ridges and mounds as erosional remnants (or interfluves). Based on the forms and spatial arrangement of the associated channels, we suggest that the ridges and mounds were generated by a combination of ice-marginal and proglacial glaciofluvial incision of glaciogenic sediments. The evidence for glaciofluvial incision, rather than ice-marginal moraine formation, at pre-Loch Lomond Readvance glacier margins in the Gaick may reflect differences in glaciodynamic regimes and/or efficient debris delivery from the glacier margins to the glaciofluvial systems.     

Glaciotectonics of the ltterbeck - Uelsen push moraines,Germany

The two Saalian push moraines of ltterbeck - Uelsen, formed during the Older Saalian glaciation, consist of Tertiary and Quaternary deposits. Locally, glaciofluvial deposits are prominent as a result of reworking of older deposits by meltwater. The push moraines are built up from a number of imbricated and folded structural units, which have moved laterally and, in part, frontally from two glacial basins. Dominant structures are large, shallow and flat-lying glaciotectonic nappes that have been displaced over distances of at lest 1 km in the direction of tectonic transport. Overprinting relations of two deformation phases give a relative age difference between the two push morianes.     

Ice marginal dynamics during surge activity,Kuannersuit Glacier,Disko Island,West Greenland

The Kuannersuit Glacier surged 11 km between 1995 and 1998. The surge resulted in the formation of an ice cored thrust moraine complex constructed by subglacial and proglacial glaciotectonic processes. Four main thrust zones are evident in the glacier snout area with phases of compressional folding and thrusting followed by hydrofracture in response to the build-up of compressional stresses and the aquicludal nature of submarginal permafrost and naled. Various types of stratified debris-rich ice facies occur within the marginal zone: The first (Facies I) comprises laterally continuous strata of ice with sorted sediment accumulations, and is reworked and thrust naled ice. The second is laterally discontinuous stratified debris-rich ice with distinct tectonic structures, and is derived through subglacial extensional deformation and localised regelation (Facies II), whilst the third type is characterised by reworked and brecciated ice associated with the reworking and entrainment of meteoric ice (Facies III). Hydrofracture dykes and sills (Facies IV) cross-cut the marginal ice cored thrust moraines, with their sub-vertically frozen internal contact boundaries and sedimentary structures, suggesting supercooling operated as high-pressure evacuation of water occurred during thrusting, but this is not related to the formation of basal stratified debris-rich ice. Linear distributions of sorted fines transverse to ice flow, and small stratified sediment ridges that vertically cross-cut the ice surface up-ice of the thrust zone relate to sediment migration along crevasse traces and fluvial infilling of crevasses. From a palaeoglaciological viewpoint, marginal glacier tectonics, ice sediment content and sediment delivery mechanisms combine to control the development of this polythermal surge valley landsystem. The bulldozing of proglacial sediments and the folding and thrusting of naled leads to the initial development of the outer zone of the moraine complex. This becomes buried in bulldozed outwash sediment and well-sorted fines through surface ablation of naled. Up-ice of this, the heavily thrust margin becomes buried in sediment melted out from basal debris-rich ice and subglacial diamicts routed along thrusts. These mechanisms combine to deliver sediment to supraglacial localities, and promote the initial preservation of structurally controlled moraines through insulation, and the later development of kettled dead ice terrain.     

Topographic controls on glacier sediment–landform associations around the temperate North Patagonian Icefield

Glacier sediment–landform associations are commonly used as interpretive and predictive tools to reconstruct the nature of past glacial events. Here we provide a regional-scale study of the sediments and landforms around the temperate North Patagonian Icefield, an area with outlet glaciers that terminate in the full range of environments possible in a temperate glacier setting (land-terminating, lake-terminating and tidewater-terminating). We present a regional-scale geomorphological map and sedimentological data collected at 11 outlet glaciers of the icefield. Key sediments and landforms include large tracts of ice-scoured bedrock, extensive sandar, terminal moraines, ice-contact glaciofluvial landforms and evidence of paraglacial slope adjustment following glacier recession. The sediments and landforms developed around the North Patagonian Icefield contrast with those previously identified at other temperate outlet glaciers in Iceland and Alaska, and we argue that this is largely a result of topographic controls on glacier terminal environment (e.g. local relief, topography and geomorphological setting).     

冰川沉积释光测年： 采样策略与测试选择

释光测年是可对冰川地貌进行直接定年的一种测年技术,已被广泛应用于冰川沉积测年中,推动了第四纪冰川研究的深入发展。但冰川沉积释光测年还没有达到标准化的程度,实际应用中仍有不少问题需要探究,其中最受关注的是冰川沉积物释光信号晒退不完全的问题,即样品在埋藏前因曝光机会有限导致信号没有归零或仅部分归零。冰川沉积释光信号晒退程度与地貌部位和沉积环境密切相关。冰川沉积释光采样需注意几个方面：（1）详细的地貌学和沉积学调查及对采样点的选择;（2）较适合释光测年的冰水沉积和冰缘风成沉积采集及其与冰川作用期次的联系;（3）冰碛夹层中的冰水砂透镜体的选取;（4）冰碛垄采样时垂直与水平方向上的考量;（5）岩石释光测年的发展使砾石成为当前第四纪冰川释光测年采样的一种选择。室内进行释光等效剂量测试时,也有几个关键的选择：（1）粗颗粒石英光释光测年是末次冰期以来冰川作用的首选方法;（2）如果样品年代老于石英测年上限,或者石英不适合测试,则可考虑钾长石后红外高温释光测年方法;（3）单颗粒、小测片和岩石释光埋藏测年技术可以鉴别样品的晒退情况,是目前最适合冰川沉积释光测年的几种选择;（4）如有条件,尝试用不同矿物、不同粒径、不同方法进行测试对比和交叉检验。要获得第四纪冰川释光测年的最佳年代学结果,地貌学、沉积学和年代学的结合是非常必要的。     

Basal Moraines: Communication 1. Essential Lithological Features

The facies complex of basal moraines with glaciodynamic structures (common basal moraines) dominates among deposits of the given genetic type. These moraines represent glacial diamictons of diverse structure and lithology. Some of their features are also typical of sediments of other genetic types. Therefore, a comprehensive study of glacial diamictons and their occurrence mode on the glacial bed (unconsolidated or consolidated) within large outcrops is methodically correct. Only such studies can unravel the wide range of specific features typical of common basal moraines.     

青藏高原古里雅冰帽冰碛和冰水沉积物粒度特征及其意义

冰冻圈演化不仅与青藏高原水塔变化、地表侵蚀风化及荒漠化密切相关,还深刻影响着亚洲季风系统和全球气候,冰碛物的粒度组成可以为冰冻圈演化提供重要信息,但高原冰碛物的特征粒度组成及其形成机理仍不清楚,高原冰碛物与高原冷黄土及河湖沉积物的关系也不明确。为此,选择青藏高原最大的冰帽——古里雅冰帽的冰碛物及系列冰水沉积物,开展系统粒度组成研究。研究发现:自终碛到冰川前端冰水扇及下游河流冰水沉积均表现出特征的双峰模态,即1～3φ(500～125μm)的中细砂峰和6～8φ(16～4μm)的细粉砂峰,前者可能由冰川压碎、寒冻风化崩裂作用造成,后者由冰川研磨作用形成,并受到源区基岩岩性软弱和组成颗粒大小的影响。冰川磨蚀的细粉砂组分含量,从冰碛物经冰水扇、河流到湖滩沉积物整体呈现减小趋势,粗粉砂在湖滩沉积中几乎完全被风吹走,粗粉砂直接成为下游黄土的物源并富集其中成为黄土特征组分,水流分选在开口湖泊中产生粗、细粉砂的明显富集,这些证据揭示出,无论是与冰川发育相关的尾闾湖沉积还是近源、远源的青藏高原及周边黄土沉积,其粉砂组成和来源,均可为高原冰冻圈的形成演化提供重要信息。     

Timing of Late Quaternary glaciations in the Himalayas of northern Pakistan

Optically stimulated luminescence dating of Late Quaternary glaciogenic sediments was undertaken in critical areas of the Himalayas of northern Pakistan in order to examine the timing of glaciation. The dates demonstrate that several glaciations occurred during the last glacial cycle. In Swat, the Grabral 2 Stade and the Kalam I Stade were dated at ca. 77 ka and ca. 38 ka, respectively. The error on the former date is large and it is conceivable that the moraines may have formed during the early part of Oxygen Isotope Stage 3 rather than during Oxygen Isotope Stage 4. The Kalam I Stade, however, clearly represents a glaciation during Oxygen Isotope Stage 3. The oldest moraines and those at the lowest altitude in the Indus valley at Shatial have an age of ca. 60 ka. These also relate to a major glacial advance during Oxygen Isotope Stage 3. A younger series of moraines, the Jalipur Tillite, and glaciofluvial sands at Liachar in the Indus valley, and moraines at Rampur–Tarshing have ages of ca. 27 ka, ca. 21–23 ka and ca. 15 ka, respectively. These dates show that glaciers also occupied parts of the Indus valley during Oxygen Isotope Stage 2. These dates and the morphostratigraphy show that glaciation in the Pakistani Himalaya was more extensive during the early part of the last glacial cycle and that the local last glacial maximum in Pakistan was asynchronous with the maximum extent of Northern Hemisphere ice sheets. Copyright © 2000 John Wiley & Sons, Ltd.     

Cosmogenic nuclide exposure ages for moraines in the Lago San Martin Valley, Argentina

At several times during the Quaternary, a major eastward-flowing outlet glacier of the former Patagonian Ice Sheet occupied the Lago San Martin Valley in Argentina (49°S, 72°W). We present a glacial chronology for the valley based on geomorphological mapping and cosmogenic nuclide (¹⁰Be) exposure ages (n = 10) of boulders on moraines and lake shorelines. There are five prominent moraine belts in the Lago San Martin Valley, associated with extensive sandar (glaciofluvial outwash plains) and former lake shorelines. Cosmogenic nuclide exposure ages for boulders on these moraines indicate that they formed at 14.3 ± 1.7 ka, 22.4 ± 2.3 ka, 34.4 ± 3.4 ka to 37.6 ± 3.4 ka (and possibly 60 ± 3.5 ka), and 99 ± 11 ka (1σ). These dated glacier advances differ from published chronologies from the Lago San Martin Valley based on ¹⁴C age determinations from organic sediments and molluscs in meltwater channels directly in front of moraines or in kettleholes within end moraine ridges. The moraine boulder ages also point to possible pre-LGM glacial advances during the last glacial cycle and a key observation from our data is that the LGM glaciers were probably less extensive in the Lago San Martin Valley than previously thought.     

Ribbed moraine formed by subglacial folding, thrust stacking and lee-side cavity infill

Transverse-to-iceflow ribbed moraine occurs in abundance in the coastal zone of northern Sweden, particularly in areas below the highest shoreline (200–230 m a.s.l.), but occasionally also slightly above. Based on detailed sedimentological and structural investigations of machine-dug sections across five ribbed moraine ridges, it is concluded that these vertically and distally prograding moraine ridges were formed as a result of subglacial folding/thrust stacking and lee-side cavity deposition. The proximal part of the moraines (Proximal Element) was formed by subglacial folding and thrust stacking of sequences of pre-existing sediments, whereas the distal part (Distal Element) was formed by glaciofluvial and gravity-flow deposition in lee-side cavities. The initial thrusting and folding is suggested to be a result of differences in bed rheology at the ice-marginal zone during the early or late melt season, and that generated a compressive zone transverse to ice flow as a result of a more mobile bed up-glacier compared to a less mobile bed down-glacier. It is considered that the lee-side cavities were formed as a result of ice-bed separation on the distal slope of the thrust/fold-created obstruction. The lee-side cavities formed an integral part of a subglacial linked-cavity drainage network regulated in their degree of interconnection, size and shape by fluctuations in basal meltwater pressure/discharge and basal iceflow velocity. The proximal and distal elements of the ribbed moraine ridges are erosively cut and/or draped with a consistently more homogeneous deforming bed till (Draping Element) marking the final phase of ribbed moraine formation considered to be contemporaneous with De Geer moraine formation further down-flow at the receding ice-sheet margin.     

Processes of annual moraine formation at a temperate alpine valley glacier: insights into glacier dynamics and climatic controls

This paper presents the first detailed sedimentological study of annual moraines formed by an alpine valley glacier. The moraines have been forming since at least AD 1980 by a subsidiary lobe of Gornergletscher, Switzerland that advances up a reverse bedrock slope. They reach heights of 0.5–1.5 m, widths of up to 6 m and lengths of up to several hundreds of metres. Sediments in these moraines are composed of proglacial outwash and debris flow units; subglacial traction till is absent entirely. Based on four representative sections, three genetic process combinations have been identified: (i) inefficient bulldozing of a gently sloping ice margin transfers proglacial sediments onto the ice, causing differential ablation and dead‐ice incorporation upon retreat; (ii) terrestrial ice‐contact fans are formed by the dumping of englacial and supraglacial material from point sources such as englacial conduit fills; debris flows and associated fluvial sediments are stacked against a temporarily stationary margin at the start, and deformed during glacier advance in the remainder, of the accumulation season; (iii) a steep ice margin without supraglacial input leads to efficient bulldozing and deformation of pre‐existing foreland sediments by wholesale folding. Ice‐surface slope appears to be a key control on the type of process responsible for moraine formation in any given place and year. The second and third modes result in stable and higher moraines that have a higher preservation potential than those containing dead ice. Analysis of the spacing and climatic records at Gornergletscher reveals that winter temperature controls marginal retreat and hence moraine formation. However, any climatic signal is complicated by other factors, most notably the presence of a reverse bedrock slope, so that the extraction of a clear climatic signal is not straightforward. This study highlights the complexity of annual moraine formation in high‐mountain environments and suggests avenues for further research.     

Landform and sediment imprints of fast glacier flow in the southwest Laurentide Ice Sheet

Evidence for former fast glacier flow (ice streaming) in the southwest Laurentide Ice Sheet is identified on the basis of regional glacial geomorphology and sedimentology, highlighting the depositional processes associated with the margin of a terrestrial terminating ice stream. Preliminary mapping from a digital elevation model of Alberta identifies corridors of smoothed topography and corridor‐parallel streamlined landforms (megaflutes to mega‐lineations) that display high levels of spatial coherency. Ridges that lie transverse to the dominant streamlining patterns are interpreted as: (a) series of minor recessional push moraines; (b) thrust block moraines or composite ridges/hill–hole pairs constructed during readvances/surges; and (c) overridden moraines (cupola hills), apparently of thrust origin. Together these landforms demarcate the beds and margins of former fast ice flow trunks or ice streams that terminated as lobate forms. Localised cross‐cutting and/or misalignment of flow sets indicates temporal separation and the overprinting of ice streams/lobes. The fast‐flow tracks are separated by areas of interlobate or inter‐stream terrain in which moraines have been constructed at the margins of neighbouring (competing) ice streams/outlet glaciers; this inter‐stream terrain was covered by more sluggish, non‐streaming ice during full glacial conditions. Thin tills at the centres of the fast‐flow corridors, in many places unconformably overlying stratified sediments, suggest that widespread till deformation may have been subordinate to basal sliding in driving fast ice flow but the general thickening of tills towards the lobate terminal margins of ice streams/outlet glaciers is consistent with subglacial deformation theory. In this area of relatively low relief we speculate that fast glacier flow or streaming was highly dynamic and transitory, sometimes with fast‐flowing trunks topographically fixed in their onset zones and with the terminus migrating laterally. The occurrence of minor push moraines and flutings and associated landforms, because of their similarity to modern active temperate glacial landsystems, are interpreted as indicative of ice lobe marginal oscillations, possibly in response to seasonal climatic forcing, in locations where meltwater was more effectively drained from the glacier bed. Further north, the occurrence of surging glacier landsystems suggests that persistent fast glacier flow gave way to more transitory surging, possibly in response to the decreasing size of ice reservoir areas in dispersal centres and also locally facilitated by ice‐bed decoupling and drawdown initiated by the development of ice‐dammed lakes. Copyright © 2008 John Wiley & Sons, Ltd.     

Glacitectonic sedimentary and hydraulic processes at an oscillating ice margin

An assemblage of subglacial, ice-terminal and proglacial landforms and sediments provides evidence for the relationship between ice-marginal glacitectonics, sedimentary processes and subglacial and proglacial hydraulic processes at a retreating late Devensian ice margin in north-central Ireland. Deltas were deposited in glacial lakes impounded between the retreating ice margin and the southern Sperrin Mountains, followed by outwash and end moraine formation as the ice margin retreated south. Sediments within the moraines show evidence for ice margin oscillation from two opposing ice margins, including subglacial bedrock rafts and breccias which are separated by glacitectonic shears with silty partings. In adjacent outwash, vertically-disturbed proglacial sands, gravels and silts located in front of moraine positions attest to high hydraulic pressure and subsurface water flow during ice oscillation. The relationship between sedimentary and hydraulic processes in the ice margin region is described by a depositional model which links glacitectonic thrusting and subsurface water flow during ice oscillation to formation of subglacial, ice-terminal and proglacial sediments. The evidence presented in this paper shows that subglacial and proglacial morphosedimentary processes and patterns of sediment deposition are mediated by the presence of proglacial permafrost, which helps direct processes and patterns of groundwater flow.     

Neoglacial (<3000 years) till and flutes at Saskatchewan Glacier,Canadian Rocky Mountains,formed by subglacial deformation of a soft bed

Understanding the processes that deposit till below modern glaciers provides fundamental information for interpreting ancient subglacial deposits. A process‐deposit‐landform model is developed for the till bed of Saskatchewan Glacier in the Canadian Rocky Mountains. The glacier is predominantly hard bedded in its upper reaches and flows through a deep valley carved into resistant Palaeozoic carbonates but the ice margin rests on a thick (<6 m) soft bed of silt‐rich deformation till that has been exposed as the glacier retreats from its Little Ice Age limit reached in 1854. In situ tree stumps rooted in a palaeosol under the till are dated between ca 2900 and 2700 yr bp and record initial glacier expansion during the Neoglacial. Sedimentological and stratigraphic observations underscore the importance of subglacial deformation of glaciofluvial outwash deposited in front of the advancing glacier and mixing with glaciolacustrine carbonate‐rich silt to form a soft bed. The exposed till plain has a rolling drumlinoid topography inherited from overridden end moraines and is corrugated by more than 400 longitudinal flute ridges which record deformation of the soft bed and fall into three genetically related types: those developed in propagating incipient cavities in the lee of large subglacial boulders embedded in deformation till, and those lacking any originating boulder and formed by pressing of wet till up into radial crevasses under stagnant ice. A third type consists of U‐shaped flutes akin to barchan dunes; these wrap around large boulders at the downglacier ends of longitudinal scours formed by the bulldozing of boulders by the ice front during brief winter readvances across soft till. Pervasive subglacial deformation during glacier expansion was probably facilitated by large boulders rotating within the soft bed (‘glacioturbation’).