Modes of orogen-parallel stretching and extensional exhumation in response to microplate indentation and roll-back subduction (Tauern Window, Eastern Alps)

The Tauern Window exposes a Paleogene nappe stack consisting of highly metamorphosed oceanic (Alpine Tethys) and continental (distal European margin) thrust sheets. In the eastern part of this window, this nappe stack (Eastern Tauern Subdome, ETD) is bounded by a Neogene system of shear (the Katschberg Shear Zone System, KSZS) that accommodated orogen-parallel stretching, orogen-normal shortening, and exhumation with respect to the structurally overlying Austroalpine units (Adriatic margin). The KSZS comprises a ≤5-km-thick belt of retrograde mylonite, the central segment of which is a southeast-dipping, low-angle extensional shear zone with a brittle overprint (Katschberg Normal Fault, KNF). At the northern and southern ends of this central segment, the KSZS loses its brittle overprint and swings around both corners of the ETD to become subvertical, dextral, and sinistral strike-slip faults. The latter represent stretching faults whose displacements decrease westward to near zero. The kinematic continuity of top-east to top-southeast ductile shearing along the central, low-angle extensional part of the KSZS with strike-slip shearing along its steep ends, combined with maximum tectonic omission of nappes of the ETD in the footwall of the KNF, indicates that north–south shortening, orogen-parallel stretching, and normal faulting were coeval. Stratigraphic and radiometric ages constrain exhumation of the folded nappe complex in the footwall of the KSZS to have begun at 23–21 Ma, leading to rapid cooling between 21 and 16 Ma. This exhumation involved a combination of tectonic unroofing by extensional shearing, upright folding, and erosional denudation. The contribution of tectonic unroofing is greatest along the central segment of the KSZS and decreases westward to the central part of the Tauern Window. The KSZS formed in response to the indentation of wedge-shaped blocks of semi-rigid Austroalpine basement located in front of the South-Alpine indenter that was part of the Adriatic microplate. Northward motion of this indenter along the sinistral Giudicarie Belt offsets the Periadriatic Fault and triggered rapid exhumation of orogenic crust within the entire Tauern Window. Exhumation involved strike-slip and normal faulting that accommodated about 100 km of orogen-parallel extension and was contemporaneous with about 30 km of orogen-perpendicular, north–south shortening of the ETD. Extension of the Pannonian Basin related to roll-back subduction in the Carpathians began at 20 Ma, but did not affect the Eastern Alps before about 17 Ma. The effect of this extension was to reduce the lateral resistance to eastward crustal flow away from the zone of greatest thickening in the Tauern Window area. Therefore, we propose that roll-back subduction temporarily enhanced rather than triggered exhumation and orogen-parallel motion in the Eastern Alps. Lateral extrusion and orogen-parallel extension in the Eastern Alps have continued from 12 to 10 Ma to the present and are driven by northward push of Adria.     

The Pfitsch-Mörchner Basin,an example of the post-Variscan sedimentary evolution in the Tauern Window (Eastern Alps)

A review of post-Variscan metasedimentary and metavolcanic successions in the western Tauern Window is presented. U/Pb – datations of zircons in metavolcanic rocks reveal ages between 309 and 280 Ma. Deposition of grey conglomerates and black pelites started before 309 Ma in the northernmost basin of the Tauern, the Riffler-Schönach basin. In the more central Pfitsch-Mörchner basin, the onset of conglomerate sedimentation can be dated into the time span between 293 and 280 Ma. The Pfitsch and Windtal Formations are newly defined. The basins were filled with up to 1 km of mainly continental clastics until Early Triassic. Short marine ingressions in Middle- and Late Triassic times flooded only basinal parts of the area where we suppose a more or less continuous sedimentation until the Late Jurassic. Only the Hochstegen Marble documents a nearly complete submergence in the area of the Tauern Window. In spite of the metamorphic overprint, the tentative interpretations of the sedimentary facies give a reasonable picture and allow correlations to nonmetamorphic areas in South Germany or the External Massifs of Eastern Switzerland.     

Using white mica 40Ar/39Ar data as a tracer for fluid flow and permeability under high‐P conditions: Tauern Window,Eastern Alps

New single‐grain‐fusion muscovite and paragonite ⁴⁰Ar/³⁹Ar data from eclogite and blueschist units exposed in the Tauern Window, Eastern Alps yield a range of apparent ages from 90 to 23 Ma. These apparent ages are generally older than expected for ⁴⁰Ar/³⁹Ar cooling ages, given constraints from other geochronological systems such as Rb–Sr and U–Pb. Numerical Ar‐in‐muscovite diffusion models for Tauern Window nappe P–T paths in an open system suggest that ⁴⁰Ar/³⁹Ar ages should lie between 29 and 24 Ma, and that they should constrain cooling and decompression following the post‐high pressure Barrovian overprint. The measured ranges of apparent ⁴⁰Ar/³⁹Ar dates suggest that the assumption of open system behaviour is not valid for this region. The local and/or regional generation of fluid during exhumation promoted pervasive recrystallization of high pressure lithologies throughout the Tauern Window to greenschist and amphibolite facies assemblages. The old apparent ⁴⁰Ar/³⁹Ar white mica dates in all lithologies are therefore interpreted as being due to inefficient removal of grain boundary Ar by the grain boundary fluids during the Barrovian overprint, due to high Ar concentrations or limited connectivity or both. This caused spatially (mm‐scale) and temporally variable fluxes of Ar out of, and probably into, white mica in both metasedimentary and metabasic lithologies.     

Eoalpine tectonics of the Eastern Alps: implications from the evolution of monometamorphic Austroalpine units (Schneeberg and Radenthein Complex)

Monometamorphic metasediments of Paleozoic or Mesozoic age constituting Schneeberg and Radenthein Complex experienced coherent deformation and metamorphism during Late Cretaceous times. Both complexes are part of the Eoalpine high-pressure wedge that formed an intracontinental suture and occur between the polymetamorphosed Ötztal–Bundschuh nappe system on top and the Texel–Millstatt Complex below. During Eoalpine orogeny Schneeberg and Radenthein Complexes were south-dipping and they experienced a common tectonometamorphic history from ca. 115 Ma onwards until unroofing of the Tauern Window in Miocene times. This evolution is subdivided into four distinct tectonometamorphic phases. Deformation stage D1 is characterized by WNW-directed shearing at high temperature conditions (550–600°C) and related to the initial exhumation of the high-pressure wedge. D2 and D3 are largely coaxial and evolved during high- to medium-temperature conditions (ca. 450 to ≥550°C). These stages are related to advanced exhumation and associated with large-scale folding of the high-pressure wedge including the Ötztal-Bundschuh nappe system above and the Texel–Millstatt Complex below. For the area west of the Tauern Window, F2/F3 fold interference results in the formation of large-scale sheath-folds in the frontal part of the nappe stack (formerly called “Schlingentektonik” by previous authors). Earlier thrusts were reactivated during Late Cretaceous normal faulting at the base of the Ötztal–Bundschuh nappe system and its cover. Deformation stage D4 is of Oligo-Miocene age and accounted for tilting of individual basement blocks along large-scale strike-slip shear zones. This tilting phase resulted from indentation of the Southern Alps accompanied by the formation of the Tauern Window.     

Peak‐temperature patterns of polyphase metamorphism resulting from accretion,subduction and collision (eastern Tauern Window,European Alps) – a study with Raman microspectroscopy on carbonaceous material (RSCM)

Raman microspectroscopy on carbonaceous material (RSCM) from the eastern Tauern Window indicates contrasting peak‐temperature patterns in three different fabric domains, each of which underwent a poly‐metamorphic orogenic evolution: Domain 1 in the northeastern Tauern Window preserves oceanic units (Glockner Nappe System, Matrei Zone) that attained peak temperatures (T_p) of 350–480 °C following Late Cretaceous to Palaeogene nappe stacking in an accretionary wedge. Domain 2 in the central Tauern Window experienced T_p of 500–535 °C that was attained either within an exhumed Palaeogene subduction channel or during Oligocene Barrovian‐type thermal overprinting within the Alpine collisional orogen. Domain 3 in the Eastern Tauern Subdome has a peak‐temperature pattern that resulted from Eo‐Oligocene nappe stacking of continental units derived from the distal European margin. This pattern acquired its presently concentric pattern in Miocene time due to post‐nappe doming and extensional shearing along the Katschberg Shear Zone System (KSZS). T_p values in the largest (Hochalm) dome range from 612 °C in its core to 440 °C at its rim. The maximum peak‐temperature gradient (≤70 °C km^?1) occurs along the eastern margin of this dome where mylonitic shearing of the Katschberg Normal Fault (KNF) significantly thinned the Subpenninic‐ and Penninic nappe pile, including the pre‐existing peak‐temperature gradient.     

Mapping of the post-collisional cooling history of the Eastern Alps

We present a database of geochronological data documenting the post-collisional cooling history of the Eastern Alps. This data is presented as (a) georeferenced isochrone maps based on Rb/Sr, K/Ar (biotite) and fission track (apatite, zircon) dating portraying cooling from upper greenschist/amphibolite facies metamorphism (500–600 °C) to 110 °C, and (b) as temperature maps documenting key times (25, 20, 15, 10 Ma) in the cooling history of the Eastern Alps. These cooling maps facilitate detecting of cooling patterns and cooling rates which give insight into the underlying processes governing rock exhumation and cooling on a regional scale.The compilation of available cooling-age data shows that the bulk of the Austroalpine units already cooled below 230 °C before the Paleocene. The onset of cooling of the Tauern Window (TW) was in the Oligocene-Early Miocene and was confined to the Penninic units, while in the Middle- to Late Miocene the surrounding Austroalpine units cooled together with the TW towards near surface conditions.High cooling rates (50 °C/Ma) within the TW are recorded for the temperature interval of 375–230 °C and occurred from Early Miocene in the east to Middle Miocene in the west. Fast cooling post-dates rapid, isothermal exhumation of the TW but was coeval with the climax of lateral extrusion tectonics. The cooling maps also portray the diachronous character of cooling within the TW (earlier in the east by ca. 5 Ma), which is recognized within all isotope systems considered in this study.Cooling in the western TW was controlled by activity along the Brenner normal fault as shown by gradually decreasing ages towards the Brenner Line. Cooling ages also decrease towards the E–W striking structural axis of the TW, indicating a thermal dome geometry. Both cooling trends and the timing of the highest cooling rates reveal a strong interplay between E–W extension and N–S orientated shortening during exhumation of the TW.     

Late stage differential exhumation of crustal blocks in the central Eastern Alps: evidence from fission track and (U–Th)/He thermochronology

Thermal history modelling based on zircon‐ and apatite fission track and apatite (U–Th)/He data constrain and refine the near‐surface exhumation of the south‐eastern Tauern Window (Penninic units) and neighbouring Austroalpine basement units in the Eastern Alps. Fast exhumation on both sides of the Penninic/Austroalpine boundary coincides with a period of lateral extrusion and tectonic denudation of the Penninic units in Miocene time (22–12 Ma). The jump to older ages occurs within the Austroalpine unit along the Polinik fault, which therefore defines the boundary between the tectonically denuded units and the hangingwall at that time. According to the different (U–Th)/He ages between the Penninic Hochalm‐ and Sonnblick Domes we demonstrate a differential cooling history of these two domes in the latest Miocene and early Pliocene.     

Tracing the exhumation of the Eclogite Zone (Tauern Window,Eastern Alps) by <Superscript>40</Superscript>Ar/<Superscript>39</Superscript>Ar dating of white mica in eclogites

New radiometric ages from the Subpenninic nappes (Eclogite Zone and Rote Wand – Modereck Nappe, Tauern Window) show that phengites formed under eclogite-facies metamorphic conditions retain their initial isotopic signature, even when associated lithologies were overprinted by greenschist- to amphibolite-facies metamorphism. Different stages of the eclogite-facies evolution can be dated provided ⁴⁰Ar/³⁹Ar dating is combined with micro-structural analyses. An age of 39 Ma from the Rote Wand – Modereck Nappe is interpreted to be close to the burial age of this unit. Eclogite deformation within the Eclogite Zone started at the pressure peak along distinct shear zones, and prevailed along the exhumation path. An age of ca. 38 Ma is only observed for eclogites not affected by subsequent deformation and is interpreted as maximum age due to the possible influence of homogenously distributed excess argon. During exhumation deformation was localised along distinct mylonitic shear zones. This stage is mainly characterised by the formation of dynamically recrystallized omphacite2 and phengite. Deformation resulted in the resetting of the Ar isotopic system within the recrystallized white mica. Flat argon release spectra showing ages of 32 Ma within mylonites record the timing of cooling along the exhumation path, and the emplacement onto the Venediger Nappe. Ar-release patterns and ³⁶Ar/⁴⁰Ar vs.³⁹Ar/⁴⁰Ar isotope correlation analyses indicate no significant ⁴⁰Ar-loss after initial closure, and only a negligible incorporation of excess argon. From the pressure peak onwards, eclogitic conditions prevailed for almost 8–10 Ma.     

Multistage Variscan magmatism in the central Tauern Window (Austria) unveiled by U/Pb SHRIMP zircon data

U/Pb SHRIMP ages of nine Variscan leucocratic orthogneisses from the central Tauern Window (Austria) reveal three distinct pulses of magmatism in Early Carboniferous (Visean), Late Carboniferous (Stephanian) and Early Permian, each involving granitoid intrusions and a contemporaneous opening of volcano-sedimentary basins. A similar relationship has been reported for the Carboniferous parts of the basement of the Alps further to the west, e.g. the “External massifs” in Switzerland. After the intrusion of subduction-related, volcanic-arc granitoids (374?±?10?Ma; Zwölferkogel gneiss), collisional intrusive-granitic, anatectic and extrusive-rhyolitic/dacitic rocks were produced over a short interval at ca. 340?Ma (Augengneiss of Felbertauern: 340?±?4?Ma, Hochweißenfeld gneiss: 342?± 5?Ma, Falkenbachlappen gneiss: 343?±?6?Ma). This Early Carboniferous magmatism, which produced relatively small volumes of melt, can be attributed to the amalgamation of the Gondwana-derived “Tauern Window” terrane with Laurussia–Avalonia. Probably due to the oblique nature of the collision, transtensional phenomena (i.e. volcano-sedimentary troughs and high-level intrusives) and transpressional regimes (i.e. regional metamorphism and stacked nappes with anatexis next to thrust planes) evolved contemporaneously. The magmas are mainly of the high-K I-type and may have been generated during a short phase of decompressional melting of lithospheric mantle and lower crustal sources. In the Late Carboniferous, a second pulse of magmatism occurred, producing batholiths of calc-alkaline I-type granitoids (e.g. Venediger tonalite: 296?±?4?Ma) and minor coeval bodies of felsic and intermediate volcanics (Heuschartenkopf gneiss: 299?±?4?Ma, Peitingalm gneiss: 300?±?5?Ma). Prior to this magmatism, several kilometres of upper crust must have been eroded, because volcano-sedimentary sequences hosting the Heu- schartenkopf and Peitingalm gneisses rest unconformably on 340-Ma-old granitoids. The youngest (Permian) period of magma generation contains the intrusion of the S-type Granatspitz Central Gneiss at 271?±?4?Ma and the extrusion of the rhyolitic Schönbachwald gneiss protolith at 279?±?9?Ma. These magmatic rocks may have been associated with local extension along continental wrench zones through the Variscan orogenic crust or with a Permian rifting event. The Permian and the above-mentioned Late Carboniferous volcano-sedimentary sequences were probably deposited in intra-continental graben structures, which survived post-Variscan uplift and Alpine compressional tectonics.     

Fault slip analysis in the Koralm Massif (Eastern Alps) and consequences for the final uplift of “cold spots” in Miocene times

The Paleogene and Neogene evolution of Austroalpine basement units east of the Tauern Window is characterised by the formation of two major sets of faults: (1) ESE–WNW- to E–W-trending faults, associated with ENE- and NNW-trending conjugate structures and (2) N–S to NNE-SSW striking structures, mainly acting as high-angle normal faults, often associated with E-dipping low-angle normal faults along the western margin of the Styrian Basin.Together with the stratigraphic evolution of the Styrian and Lavanttal Basins and the related subsidence histories a tectonic evolution may be reconstructed for this part of the Eastern Alps. In the southern part of the Koralm Massif, WNW-trending fractures were activated as dextral strike-slip faults, associated with the evolution of WNW-trending troughs filled up with coarse block debris. W- to WNW-trending fractures were reactivated as normal faults, indicating N–S extension. It is assumed that these phases resulted in subsidence and block debris sedimentation in Karpatian and Badenian times (ca. 17–13 Ma).In the Western Styrian Basin no Sarmatian (13–11.5 Ma) sediments are observed; Pannonian (11.5 to 7.1 Ma) sediments are restricted to the Eastern Styrian Basin. This indicates, that the Koralm basement and the Western Styrian Basin were affected by post-Sarmatian uplift, coinciding with a re-activation of N-trending normal faults along the eastern margin of the Koralm Massif. Therefore, we suggest that the final uplift of the Koralm Complex, partly together with the Western Styrian Basin, occurred during the early Pannonian (at approximately 10 Ma). The elevation of clastic deposits indicates that the Koralm Complex was elevated by approximately 800 m during this phase, associated with an additional phase of E–W-directed extension accommodated by N–S striking normal faults.     

Syn‐metamorphic folding in the Tauern Window,Austria dated by Th–Pb ages from individual allanite porphyroblasts

High‐precision ²³²Th–²⁰⁸Pb dates have been obtained from allanite porphyroblasts that show unambiguous microstructural relationships to fabrics in a major syn‐metamorphic fold in the SE Tauern Window, Austria. Three porphyroblasts were analysed from a single garnet mica schist from the Peripheral Schieferhülle in the core of the Ankogel Synform, one of a series of folds which developed shortly before the thermal peak of Alpine epidote–amphibolite facies metamorphism: allanite grain 1 provided two analyses with a combined age of 27.7 ± 0.7 Ma; grain 2, which was slightly bent and fractured during crenulation, provided two analyses with a combined age of 27.7 ± 0.4 Ma; a single analysis from grain 3, which overgrew an already crenulated fabric, gave an age of 28.0 ± 1.4 Ma. The five ²³²Th–²⁰⁸Pb ages agree within error and define an isochron with an age of 27.71 ± 0.36 Ma (95% confidence level; MSWD = 0.46). The results imply that the crenulation event was in progress in a short interval (<1 Ma) c. 28 Ma, and that the Ankogel Synform was forming at this time. The thermal peak of regional metamorphism in the SE Tauern Window was probably attained shortly after 28 Ma, only c. 5 Ma after eclogite facies metamorphism in the central Tauern Window. Metasediment may contain allanite porphyroblasts with clear‐cut microstructural relationships to fabric development and metamorphic crystallization; for such rocks, ²³²Th–²⁰⁸Pb dating on microsamples offers a powerful geochronological tool.     

Formation, subduction, and exhumation of Penninic oceanic crust in the Eastern Alps: time constraints from Ar/Ar geochronology

New ⁴⁰Ar/³⁹Ar geochronology places time constraints on several stages of the evolution of the Penninic realm in the Eastern Alps. A 186±2 Ma age for seafloor hydrothermal metamorphic biotite from the Reckner Ophiolite Complex of the Pennine–Austroalpine transition suggests that Penninic ocean spreading occurred in the Eastern Alps as early as the Toarcian (late Early Jurassic). A 57±3 Ma amphibole from the Penninic subduction–accretion Rechnitz Complex dates high-pressure metamorphism and records a snapshot in the evolution of the Penninic accretionary wedge. High-pressure amphibole, phengite, and phengite+paragonite mixtures from the Penninic Eclogite Zone of the Tauern Window document exhumation through ≤15 kbar and >500 °C at 42 Ma to 10 kbar and 400 °C at 39 Ma. The Tauern Eclogite Zone pressure–temperature path shows isothermal decompression at mantle depths and rapid cooling in the crust, suggesting rapid exhumation. Assuming exhumation rates slower or equal to high-pressure–ultrahigh-pressure terrains in the Western Alps, Tauern Eclogite Zone peak pressures were reached not long before our high-pressure amphibole age, probably at ≤45 Ma, in accordance with dates from the Western Alps. A late-stage thermal overprint, common to the entire Penninic thrust system, occurred within the Tauern Eclogite Zone rocks at 35 Ma. The high-pressure peak and switch from burial to exhumation of the Tauern Eclogite Zone is likely to date slab breakoff in the Alpine orogen. This is in contrast to the long-lasting and foreland-propagating Franciscan-style subduction–accretion processes that are recorded in the Rechnitz Complex.     

Evolution of quartz microstructures and textures during polyphase deformation within the Tauern Window (Eastern Alps)

The interior of the Tauern Window exposes underplated Penninic continental lithosphere and the overlying obducted Penninic oceanic crust within a large antiformal dome in the internal zone of the Eastern Alps. These units have been affected by a polyphase deformation history. Generally, three deformation events are distinguished. D₁ is related to underplating of, and top-to-the-N nappe stacking within, the Penninic continental units of the Tauern Window. Deformation stage D₂ is interpreted to reflect the subsequent continent collision between the Penninic continental units and the European foreland, D₃ is related to the formation of the dome structure within the Tauern Window. During thickening of continental lithosphere and nappe stacking (D₁), and subsequent intracontinental shortening (D₂), these tectonic units have been ductilely deformed close to a plane strain geometry. Conditions for the plastic deformation of the main rock-forming mineral phases (quartz, feldspar, dolomite, calcite) have prevailed during all three phases of crustal deformation. Generally, two types of quartz microstructures that are related to D₁ are distinguished within the Tauern Window: (a) Equilibrated and annealed fabrics without crystallographic preferred orientations (CPO) have only been observed in the central part of the southeastern Tauern Window, corresponding with amphibolite-grade metamorphic conditions. (b) In the northeastern and central part of the Tauern Window microstructures are characterized by quartz grains that show equilibrated shape fabrics, but well preserved CPO with type-I cross girdle distributions, indicating a deformation geometry close to plane strain. During D₂, two types of quartz microstructures are distinguished, too: (a) Quartz grains that show equilibrated shape fabrics, but well-preserved CPO. The c-axes distributions generally are characterized by type-I cross girdles, locally by type-II cross girdles, and in places, oblique single girdle distributions. (b) A second type of quartz microstructure is characterized by highly elongated grains and fabrics typical for dislocation creep and grain-boundary migration, and strong CPO. This type is restricted to the southern sections of the western and eastern Tauern Window. The c-axis distributions show type-I cross girdles in the western part of the Tauern Window and single girdles in the southeastern part. In the western part of the Tauern Window, a continuous transition from type (b) microstructures in the south to type (a) microstructures in the north is documented. The microstructural evolution also documents that the dome formation in the southeastern and western Tauern Window has already started during D₂ and has continued subsequent to the equilibration during amphibolite to greenschist facies metamorphism. D₃ is restricted to distinct zones of localized deformation. D₃-related quartz fabrics are characterized by the formation of ribbon grains; the c-axes show small-circle distributions around the Z-axis of the finite-strain ellipsoid. During exhumation and doming (D₃), deformation occurred under continuously decreasing temperatures.     

Alpine geodynamic evolution of passive and active continental margin sequences in the Tauern Window (eastern Alps, Austria, Italy): a review

The Penninic oceanic sequence of the Glockner nappe and the foot-wall Penninic continental margin sequences exposed within the Tauern Window (eastern Alps) have been investigated in detail. Field data as well as structural and petrological data have been combined with data from the literature in order to constrain the geodynamic evolution of these units. Volcanic and sedimentary sequences document the evolution from a stable continent that was formed subsequent to the Variscan orogeny, to its disintegration associated with subsidence and rifting in the Triassic and Jurassic, the formation of the Glockner oceanic basin and its consumption during the Upper Cretaceous and the Paleogene. These units are incorporated into a nappe stack that was formed during the collision between a Penninic Zentralgneis block in the north and a southern Austroalpine block. The Venediger nappe and the Storz nappe are characterized by metamorphic Jurassic shelf deposits (Hochstegen group) and Cretaceous flysch sediments (Kaserer and Murtörl groups), the Eclogite Zone and the Rote Wand–Modereck nappe comprise Permian to Triassic clastic sequences (Wustkogel quartzite) and remnants of platform carbonates (Seidlwinkl group) as well as Jurassic volcanoclastic material and rift sediments (Brennkogel facies), covered by Cretaceous flyschoid sequences. Nappe stacking was contemporaneous to and postdated subduction-related (high-pressure) eclogite and blueschist facies metamorphism. Emplacement of the eclogite-bearing units of the Eclogite zone and the Glockner nappe onto Penninic continental units (Zentralgneis block) occurred subsequent to eclogite facies metamorphism. The Eclogite zone, a former extended continental margin, was subsequently overridden by a pile of basement-cover nappes (Rote Wand–Modereck nappe) along a ductile out-of-sequence thrust. Low-angle normal faults that have developed during the Jurassic extensional phase might have been inverted during nappe emplacement.     

Isotopic disequilibrium in ultrahigh-pressure and retrograde metamorphism of eclogite and gneiss from the Chinese Continental Scientific Drilling in the Sulu orogen, China: evidence from mineral Nd–Sr–O isotopic composition

Diffusion rates of Sr and O in minerals are often comparable while Nd has a lower diffusion rate during thermal overprint(s); thus, the O isotope systems between metamorphic minerals can serve as an indicator to evaluate whether equilibrium of Rb–Sr and Sm–Nd systems has been preserved in the metamorphic minerals that experienced retrograde metamorphism. This study presents a combination of investigation on Sm–Nd, Rb–Sr, and O isotopic compositions of minerals separated from ultrahigh-pressure eclogite and gneiss that were collected from the main hole of the Chinese Continental Scientific Drilling project located in the Sulu orogen, eastern China. Oxygen isotopic compositions of minerals from gneiss and eclogite yield two temperature groups of 620–740 and 460–590°C, representing diffusion cessation of isotopic exchange during the eclogite-facies recrystallization and later amphibolite-facies retrograde overprint. Rb–Sr mineral regressions of two eclogite samples give consistent Triassic ages of 244 Ma, corresponding to eclogite-facies metamorphism, while the same minerals do not yield meaningful Sm–Nd isochron ages. This phenomenon likely suggests that Rb–Sr isotopic equilibrium was achieved during eclogite-facies metamorphism and preserved during late amphibolite-facies retrogression. In contrast, Sm–Nd isotopic equilibrium between the minerals of eclogite was not achieved under UHP metamorphic conditions. Regressions of epidote and biotite of one gneiss sample give a Triassic Sm–Nd age of 243 ± 34 Ma, corresponding to the time of the eclogite-facies metamorphism, and a Jurassic mineral Rb–Sr age of 187.5 ± 1.8 Ma. These results imply that fluids have played an important role to achievement of the Sm–Nd isotopic equilibrium during eclogite-facies metamorphism and re-equilibration of the Rb–Sr isotopic system during later retrograde overprint.     

Geothermobarometry in metasediments of the southern Grossvenediger area (Tauern Window, Austria)

Metasediments in the southern Grossvenediger area (Tauern Window, Austria) were studied along a cross-section through rocks of increasing metamorphic grade from the margin of the Tauern Window in the south to the base of the Upper Schieferhülle, including the Eclogite Zone, in the north. In the southern part of the cross-section there is no evidence for a pre-late Alpine metamorphic history in the form of high-pressure relics or pseudomorphs. Mineral assemblages are characterized by the stability of tremolite + calcite, biotite + calcite and biotite + chlorite + calcite. In the northern part a more complete Alpine metamorphic evolution is preserved. Primary high-pressure assemblages are dolomite + quartz, tremolite + zoisite, zoisite + dolomite + quartz + phengite I and probably tremolite + dolomite + phengite I. Secondary, post-kinematic assemblages [tremolite + calcite, talc + calcite, phengite II + chlorite + calcite (+ quartz), biotite + chlorite + calcite, biotite + zoisite + calcite] formed as a result of the dominant late Alpine metamorphic overprint. The occurrence of biotite + zoisite + calcite is confined to the northernmost area and defines a biotite–zoisite–calcite isograd. P–T estimates based on standard thermobarometric techniques and on stability relationships of tremolite + calcite + dolomite + quartz and zoisite give consistent results. P–T conditions of the main Tertiary metamorphic overprint were 525° C, P= 7.5 ± 1 kbar in the northern part of the cross-section. The southern part was metamorphosed at lower temperatures of 430–470° C. The Si-content of phengites from this area is almost as high as that of phengites from the Eclogite Zone (Si^max= 3.4 pfu). Pressures > 10 kbar at 420° C are suggested by phengite barometry according to Massone & Schreyer (1987). In the absence of high-pressure relics or pseudomorphs, these phengites, which lack late Alpine re-equilibration, are the only record that rocks of the southern part probably also experienced an early non-eclogitic high-pressure metamorphism.     

Kinematics of the Inntal shear zone–sub-Tauern ramp fault system and the interpretation of the TRANSALP seismic section, Eastern Alps, Austria

A new interpretation of the Inntal–Tauern sector of the TRANSALP seismic section is presented. One of the most prominent contrasts in reflectivity in the TRANSALP seismic section is the contact between the Bajuvaric unit in the footwall and the overlying Tirolic unit and its basement across a moderately south-dipping interface. We trace this contact from the surface at the southern margin of the Inn valley to a depth of 5 km. There, the contact is deformed or cut by the Tauern Window northern margin. We define the contact between Bajuvaric and Tirolic units as Brixlegg thrust, which is older than Miocene Tauern window exhumation and has a Paleogene age. The sub-Tauern ramp connects with the Inntal fault system at the surface and roots below the Tauern window. Oblique thrust movements across this fault system in the Miocene caused exhumation of the hanging wall, where the fault has a ramp geometry, which is in the area of the TRANSALP cross section and west of it. East of the TRANSALP cross section, the fault system merges with Alpine basal thrust, which is a flat. No Miocene exhumation occurred above the flat.     

Time calibration of a PT-path from the Western Tauern Window,Eastern Alps: the problem of closure temperatures

New Hornblende K-Ar and ³⁹Ar-⁴⁰Ar and mica Rb-Sr and K-Ar ages are used to place specific timemarks on a well-constrained pressure-temperature path for the late Alpine metamorphism in the Western Tauern Window. After identification of excess ⁴⁰Ar, the closure behavior of Ar in hornblende is compared with that of Sr and Ar in phengite and biotite. Samples were collected in three locations, whose maximum temperatures were 570° C (Zemmgrund), 550° C (Pfitscher Joch), and 500–540° C (Landshuter Hütte).The average undisturbed age sequence found is: Phengite Rb-Sr (20 Ma)>hornblende K-Ar (18 Ma)>phengite K-Ar (15 Ma)>biotite Rb-Sr, K-Ar (13.3 Ma)>apatite FT (7 Ma). Except for the phengite Rb-Sr age, the significance of which is debatable, all ages are cooling ages. No compositional effects are seen for closure in biotite. Additionally, Rb-Sr phengite ages from shearzones possibly indicate continuous shearing from 20 to 15 Ma, with reservations regarding the validity of the initial Sr correction and possible variations of the closure temperatures. The obviously lower closure temperature (T _c) for Ar in these hornblendes than for Sr in the unsheared phengites indicates that the T _c sequence in the Western Tauern Window is different from those observed in other terrains. In spite of this discrepancy, valuable geological conclusions can be drawn if the application of closure temperatures is limited to this restricted area with similar T, P and : (1) All ages of samples located on equal metamorphic isotherms decrease from east to west by about 1 Ma which is the result of a westward tilting of the Tauern Window during uplift. (2) In a PT-path, the undisturbed cooling ages yield constantly decreasing uplift rates from 3.6 mm/a to 0.1 mm/a. (3) Use of recently published diffusion data for Ar in hornblende (T _c=520° C) and biotite (T _c=320° C) suggests an extrapolated phengite closure temperature for Sr at 550° C. This suggests that the prograde thermal metamorphism at this tectonic level of the Tauern Window lasted until some 20 Ma ago.     

Zircon evidence for a ~200 k.y. supereruption-related thermal flare-up in the Miocene southern Black Mountains,western Arizona,USA

The Silver Creek caldera (southern Black Mountains, western Arizona) is the source of the 18.8 Ma, >700 km³ Peach Spring Tuff (PST) supereruption, the largest eruption generated in the Colorado River Extensional Corridor (CREC) of the southwestern United States. Within and immediately surrounding the caldera is a sequence of volcanics and intrusions ranging in age from ~19 to 17 Ma. These units offer a record of magmatic processes prior to, during, and immediately following the PST eruption. To investigate the thermal evolution of the magmatic center that produced the PST, we applied a combination of Ti-in-zircon thermometry, zircon saturation thermometry, and high-precision U–Pb CA–TIMS zircon dating to representative pre- and post-supereruption volcanic and intrusive units from the caldera and its environs. Similar to intracaldera PST zircons, zircons from a pre-PST trachytic lava (19 Ma) and a post-PST caldera intrusion (18.8 Ma) yield exceptionally high-Ti concentrations (most >20 ppm, some up to nearly 60 ppm), corresponding to calculated temperatures that exceed 900 °C. In these units, Ti-in-zircon temperatures typically surpass zircon saturation temperatures (ZSTs), suggesting the entrainment of zircon that had grown in hotter environments within the magmatic system. Titanium concentrations in younger volcanic and intrusive units (~18.7–17.5 Ma) decline through time, corresponding to an average cooling rate of 10^?3.5 °C/year. The ~200 k.y. thermal peak evident at Silver Creek caldera is spatially limited: elsewhere in the Miocene record of the northern CREC, Ti-in-zircon concentrations and ZSTs are much lower, suggesting that felsic magmas were generally substantially cooler.     

Cenozoic tectonic evolution of the central Wassuk Range,western Nevada,USA

The central Wassuk Range is ideally located to investigate the interplay of Basin and Range extension and Walker Lane dextral deformation along the western Nevada margin of the Basin and Range province. To elucidate the Cenozoic evolution of the range, the author conducted geologic mapping, structural data collection and analysis, geochemical analysis of igneous lithologies, and geochronology. This research delineates a three-stage deformational history for the range. A pulse of ENE–WSW-directed extension at high strain rates (～8.7 mm/yr) was initiated immediately after the eruption of ～15 Ma andesite flows; strain was accommodated by high-angle, closely spaced (1–2 km), east-dipping normal faults which rotated and remained active to low angles as extension continued. A post-12 Ma period of extension at low strain rates produced a second generation of normal faults and two prominent dextral strike–slip faults which strike NW, subparallel to the dextral faults of the Walker Lane at this latitude. A new pulse of ongoing extension began at ～4 Ma and has been accomodated primarily by the east-dipping range-bounding normal fault system. The increase in the rate of fault displacement has resulted in impressive topographic relief on the east flank of the range, and kinematic indicators support a shift in extension direction from ENE–WSW during the highest rates of Miocene extension to WNW–ESE today. The total extension accommodated across the central Wassuk Range since the middle Miocene is >200%, with only a brief period of dextral fault activity during the late Miocene. Data presented here suggest a local geologic evolution intimately connected to regional tectonics, from intra-arc extension in the middle Miocene, to late Miocene dextral deformation associated with the northward growth of the San Andreas Fault, to a Pliocene pulse of extension and magmatism likely influenced by both the northward passage of the Mendocino triple junction and possible delamination of the southern Sierra Nevada crustal root.