Incursion of a large-volume,spatter-bearing pyroclastic density current into a caldera lake: Pavey Ark ignimbrite,Scafell caldera,England

The Scafell caldera-lake volcaniclastic succession is exceptionally well exposed. At the eastern margin of the caldera, a large andesitic explosive eruption (>5 km³) generated a high-mass-flux pyroclastic density current that flowed into the caldera lake for several hours and deposited the extensive Pavey Ark ignimbrite. The ignimbrite comprises a thick (≤125 m), proximal, spatter- and scoria-rich breccia that grades laterally and upwards into massive lapilli-tuff, which, in turn, is gradationally overlain by massive and normal-graded tuff showing evidence of soft-state disruption. The subaqueous pyroclastic current carried juvenile clasts ranging from fine ash to metre-scale blocks and from dense andesite through variably vesicular scoria to pumice (<10³ kg m⁻³). Extreme ignimbrite lithofacies diversity resulted via particle segregation and selective deposition from the current. The lacustrine proximal ignimbrite breccia mainly comprises clast- to matrix-supported blocks and lapilli of vesicular andesite, but includes several layers rich in spatter (≤1.7 m diameter) that was emplaced in a ductile, hot state. In proximal locations, rapid deposition of the large and dense clasts caused displacement of interstitial fluid with elutriation of low-density lapilli and ash upwards, so that these particles were retained in the current and thus overpassed to medial and distal reaches. Medially, the lithofacies architecture records partial blocking, channelling and reflection of the depletive current by substantial basin-floor topography that included a lava dome and developing fault scarps. Diffuse layers reflect surging of the sustained current, and the overall normal grading reflects gradually waning flow with, finally, a transition to suspension sedimentation from an ash-choked water column. Fine to extremely fine tuff overlying the ignimbrite forms ∼25% of the whole and is the water-settled equivalent of co-ignimbrite ash; its great thickness (≤55 m) formed because the suspended ash was trapped within an enclosed basin and could not drift away. The ignimbrite architecture records widespread caldera subsidence during the eruption, involving volcanotectonic faulting of the lake floor. The eruption was partly driven by explosive disruption of a groundwater-hydrothermal system adjacent to the magma reservoir.     

Evolution of an englacial volcanic ridge: Pillow Ridge tindar, Mount Edziza volcanic complex, NCVP, British Columbia, Canada

Glaciovolcanic deposits are critical for documenting the presence and thickness of terrestrial ice-sheets, and for testing hypotheses about inferred terrestrial ice volumes based on the marine record. Deposits formed by the coincidence of volcanism and ice at the Mount Edziza volcanic complex (MEVC) in northern British Columbia, Canada, preserve an important record for documenting local and possibly regional ice dynamics. Pillow Ridge, located at the northwestern end of the MEVC, formed by ice-confined, fissure-fed eruptions. It comprises predominantly pillow lavas and volcanic breccias of alkaline basalt composition, with subordinate finer-grained volcaniclastic deposits and dykes. The ridge is presently  4 km long,  1000 m in maximum width, and  600 m high. Fifteen syn- and post-eruptive lithofacies are recognized in excellent exposures along the glacially dissected western side of the ridge. We recognize five lithofacies associations: (1) poorly sorted tuff breccia and dykes, (2) proximal pillow lava, dykes and tuff breccia, (3) distal pillow lava, poorly sorted conglomerate and well-sorted volcanic sandstone, (4) interbedded tuff, lapilli tuff, and tuff breccia units, and (5) heterolithic volcanogenic conglomerate and sandstone. Given the abundance of pillow lavas and the lack of surrounding topographic barriers capable of impounding water, we agree with Souther [Souther, J.G., 1992. The late Cenozoic Mount Edziza volcanic complex. Geol. Soc. Can. Mem., vol. 420. 320 pp] that the bulk of the edifice formed while confined by ice, but have found evidence for a more complex and variable eruption history than that which he proposed. Preliminary estimates of water-ice depths derived from FTIR analyses of H₂O give ranges of 300 to 680 m assuming 0 ppm CO₂, and 857 to 1297 m assuming 25 ppm CO₂. Variations in depth estimates among samples may indicate that water/ice depths changed during the evolution of the ridge, which is consistent with our interpretations for the origins of different lithofacies associations. Given that the age of the units are likely to be ca. 0.9 Ma [Souther, J.G., 1992. The late Cenozoic Mount Edziza volcanic complex. Geol. Soc. Can. Mem., vol. 420. 320 pp], Pillow Ridge may be the best documentation of a regional high stand of the Cordilleran Ice Sheet (CIS) in the middle Pleistocene, and an excellent example of the lithofacies and stratigraphic complexities produced by variations in water levels during a prolonged glaciovolcanic eruption.     

Subglacial to emergent basaltic volcanism at Hlöðufell, south-west Iceland: A history of ice-confinement

Hlöðufell is a familiar 1186 m high landmark, located about 80 km northeast of Reykjavík, and 9 km south of the Langkjökull ice-cap in south-west Iceland. This is the first detailed study of this well-exposed and easily accessible subglacial to emergent basaltic volcano. Eight coherent and eleven volcaniclastic lithofacies are described and interpreted, and its evolution subdivided into four growth stages (I–IV) on the basis of facies architecture. Vents for stages I, II, and IV lie along the same fissure zone, which trends parallel to the dominant NNE–SSW volcano-tectonic axis of the Western Volcanic Zone in this part of Iceland, but the stage III vent lies to the north, and is probably responsible for the present N–S elongation of the volcano. The basal stage (I) is dominated by subglacially erupted lava mounds and ridges, which are of 240 m maximum thickness, were fed from short fissures and locally display lava tubes. Some of the stage I lavas preserve laterally extensive flat to bulbous, steep, glassy surfaces that are interpreted to have formed by direct contact with surrounding ice, and are termed ice-contact lava confinement surfaces. These surfaces preserve several distinctive structures, such as lava shelves, pillows that have one flat surface and mini-pillow (< 10 cm across) breakouts, which are interpreted to have formed by the interplay of lava chilling and confinement against ice, ice melting and ice fracture. The ice-contact lava confinement surfaces are also associated with zones of distinctive open cavities in the lavas that range from about 1 m to several metres across. The cavities are interpreted as having arisen by lava engulfing blocks of ice, that had become trapped in a narrow zone of meltwater between the lava and the surrounding ice, and are termed ice-block meltout cavities. The same areas of the lavas also display included and sometimes clearly rotated blocks of massive to planar to cross-stratified hyaloclastite lapilli tuffs and tuff–breccias, termed hyaloclastite inclusions, which are interpreted as engulfed blocks of hyaloclastite/pillow breccia carapace and talus, or their equivalents reworked by meltwater. Some of the stage I lavas are mantled at the southern end of the mountain by up to 35 m thickness of well-bedded vitric lapilli tuffs (stage II), of phreatomagmatic origin, which were erupted from a now dissected cone, preserved in this area. The tephra was deposited dominantly by subaqueous sediment gravity flows (density currents) in an ice-bound lake (or less likely a sub-ice water vault), and was also transported to the south by sub-ice meltwater traction currents. This cone is onlapped by a subaerial pahoehoe lava-fed delta sequence, formed during stage III, and which was most likely fed from a now buried vent(s), located somewhere in the north-central part of the mountain. A 150 m rise in lake level submerged the capping lavas, and was associated with progradation of a new pahoehoe lava-fed delta sequence, produced during stage IV, and which was fed from the present summit cone vent. The water level rise and onset of stage IV eruptions were not associated with any obviously exposed phreatomagmatic deposits, but they are most likely buried beneath stage IV delta deposits. Stage IV lava-fed deltas display steep benches, which do not appear to be due to syn- or post-depositional mass wasting, but were probably generated during later erosion by ice. The possibility that they are due to shorter progradation distances than the underlying stage III deltas, due to ice-confinement or lower volumes of supplied lava is also considered.     

Large phreatomagmatic vent complex at Coombs Hills, Antarctica: Wet, explosive initiation of flood basalt volcanism in the Ferrar-Karoo LIP

The Mawson Formation and correlatives in the Transantarctic Mountains and South Africa record an early eruption episode related to the onset of Ferrar-Karoo flood basalt volcanism. Mawson Formation rocks at Coombs Hills comprise mainly (≥80% vol) structureless tuff breccia and coarse lapilli tuff cut by irregular dikes and sills, within a large vent complex (>30 km²). Quenched juvenile fragments of generally low but variable vesicularity, accretionary lapilli and country rock clasts within vent-fill, and pyroclastic density current deposits point to explosive interaction of basalt with groundwater in porous country rock and wet vent filling debris. Metre-scale dikes and pods of coherent basalt in places merge imperceptibly into peperite and then into surrounding breccia. Steeply dipping to sub-vertical depositional contacts juxtapose volcaniclastic rocks of contrasting componentry and grainsize. These sub-vertical tuff breccia zones are inferred to have formed when jets of debris + steam + water passed through unconsolidated vent-filling deposits. These jets of debris may have sometimes breached the surface to form subaerial tephra jets which fed subaerial pyroclastic density currents and fall deposits. Others, however, probably died out within vent fill before reaching the surface, allowing mixing and recycling of clasts which never reached the atmosphere. Most of the ejecta that did escape the debris-filled vents was rapidly recycled as vents broadened via lateral quarrying of country rock and bedded pyroclastic vent-rim deposits, which collapsed along the margins into individual vents. The unstratified, poorly sorted deposits comprising most of the complex are capped by tuff, lapilli tuff and tuff breccia beds inferred to have been deposited on the floor of the vent complex by pyroclastic density currents. Development of the extensive Coombs Hills vent-complex involved interaction of large volumes of magma and water. We infer that recycling of water, as well as recycling of pyroclasts, was important in maintaining water supply for phreatomagmatic interactions even when aquifer rock in the vent walls lay far from eruption sites as a consequence of vent-complex widening. The proportion of recycled water increased with vent-complex size in the same way that the proportion of recycled tephra did. Though water recycling leaves no direct rock record, the volcaniclastic deposits within the vent complex show through their lithofacies/structural architecture, lithofacies characteristics, and particle properties clear evidence for extensive and varied recycling of material as the complex evolved. Editorial responsibility: J. Donnelly-Nolan     

Felsic fire-fountaining beneath Archean seas: pyroclastic deposits of the 2730 Ma Hunter Mine Group, Quebec, Canada

The lapilli tuff breccias (LTB-1 and LTB-2) of the Archean Hunter Mine Group in the south-central part of the Abitibi greenstone belt are inferred to be the product of subaqueous lava fountaining. Intercalated sub-wave base iron-formations, interstratified turbiditic tuffs, the absence of wave-induced sedimentary structures, and the stratigraphic position of lapilli tuff breccias beneath basaltic komatiites, support this contention. A complete eruptive sequence shows a tripartite division into (a) massive breccia, (b) stratified lapilli tuff, and (c) turbiditic tuff-lapilli tuff division. The massive breccia division is characterized by clusters of isolated and compressed irregular-shaped clasts inferred to be deposited directly from the hot magmatic lava fountain. Abundant vesicular pyroclasts with a vesicle content of up to 60% exhibit locally coalescing vesicles indicating bubble nucleation prior to eruption. The prevalence of irregular to amoeboid clast shapes suggests transport from the vent in a steamy-rich, high-density current to the site under a self-generated steam cupola. Ubiquitous subequant lapilli-size pyroclasts of the stratified lapilli tuff division suggest that significant ingress of water into the fountain changed the prevalent fragmentation process from magmatic to hydrovolcanic. The turbiditic tuff-lapilli tuff division composed of pumice, lithic fragments and vitric ash is envisaged to have formed by gravitational collapse of a subaqueous turbulent eruptive plume. This type of eruptive mechanism constituted a minor but important process of volcanic construction on the ocean floor during the Archean, and possibly during incipient arc and backarc formation in modern day settings.     

Products and processes in Pliocene–Recent, subaqueous to emergent volcanism in the Antarctic Peninsula: examples of englacial Surtseyan volcano construction

 Pliocene–Recent volcanic outcrops at Seal Nunataks and Beethoven Peninsula (Antarctic Peninsula) are remnants of several monogenetic volcanoes formed by eruption of vesiculating basaltic magma into shallow water, in an englacial environment. The diversity of sedimentary and volcanic lithofacies present in the Antarctic Peninsula outcrops provides a clear illustration of the wide range of eruptive, transportational and depositional processes which are associated with englacial Surtseyan volcanism. Early-formed pillow lava and glassy breccia, representing a pillow volcano stage of construction, are draped by tephra erupted explosively during a tuff cone stage. The tephra was resedimented around the volcano flanks, mainly by coarse-grained sediment gravity flows. Fine-grained lithofacies are rare, and fine material probably bypassed the main volcanic edifice, accumulating in the surrounding englacial basin. The pattern of sedimentation records variations in eruption dynamics. Products of continuous-uprush eruptions are thought to be represented by stacks of poorly bedded gravelly sandstone, whereas better bedded, lithologically more diverse sequences accumulated during periods of quiescence or effusive activity. Evidence for volcano flank failure is common. In Seal Nunataks, subaerial lithofacies (mainly lavas and cinder cone deposits) are volumetrically minor and occur at a similar stratigraphical position to pillow lava, suggesting that glacial lake drainage may have occurred prior to or during deposition of the subaerial lithofacies. By contrast, voluminous subaerial effusion in Beethoven Peninsula led to the development of laterally extensive stratified glassy breccias representing progradation of hyaloclastite deltas. Received: 5 February 1996 / Accepted: 17 January 1997     

Block‐and‐ash flow deposit of the Narcondam Volcano: Product of dacite–andesite dome collapse in the Burma–Java subduction complex

Narcondam Island in the Andaman Sea represents a dacite–andesite dome volcano in the volcanic chain of the Burma–Java subduction complex. The pyroclasts of andesitic composition are restricted to the periphery of the dome predominantly in the form of block‐and‐ash deposits and minor base surge deposits. Besides pyroclastic deposits, andesitic lava occurs dominantly at the basal part of the dome whereas dacitic lava occupies the central part of the dome. The pyroclasts are represented by non‐vesiculated to poorly vesiculated blocks of andesite, lapilli, and ash. The hot debris derived from dome collapse was deposited initially as massive to reversely‐graded beds with the grain support at the lower part and matrix support at the upper part. This sequence is overlain by repetitive beds of lapilli breccia to tuff breccia. These deposits are recognized as a basal avalanche rather than lahar deposit. This basal avalanche was punctuated by an ash‐cloud surge deposit representing a sequence of thinly bedded units of normal graded unit to parallel laminated beds.     

A Pliocene shoaling basaltic seamount: Ba Volcanic Group at Rakiraki, Fiji

At Rakiraki in northeastern Viti Levu, the Pliocene Ba Volcanic Group comprises gently dipping, pyroxene-phyric basaltic lavas, including pillow lava, and texturally diverse volcanic breccia interbedded with conglomerate and sandstone. Three main facies associations have been identified: (1) The primary volcanic facies association includes massive basalt (flows and sills), pillow lava and related in-situ breccia (pillow-fragment breccia, autobreccia, in-situ hyaloclastite, peperite). (2) The resedimented volcaniclastic facies association consists of bedded, monomict volcanic breccia and scoria lapilli-rich breccia. (3) The volcanogenic sedimentary facies association is composed of bedded, polymict conglomerate and breccia, together with volcanic sandstone and siltstone-mudstone facies. Pillow lava and coarse hyaloclastite breccia indicate a submarine depositional setting for most of the sequence. Thick, massive to graded beds of polymict breccia and conglomerate are interpreted as volcaniclastic mass-flow deposits emplaced below wave base. Well-rounded clasts in conglomerate were reworked during subaerial transport and/or temporary storage in shoreline or shallow water environments prior to redeposition. Red, oxidised lava and scoria clasts in bedded breccia and conglomerate also imply that the source was partly subaerial. The facies assemblage is consistent with a setting on the submerged flanks of a shoaling basaltic seamount. The coarse grade and large volume of conglomerate and breccia reflect the high supply rate of clasts, and the propensity for collapse and redeposition on steep palaeoslopes. The clast supply may have been boosted by vigorous fragmentation processes accompanying transition of lava from subaerial to submarine settings. The greater proportion of primary volcanic facies compared with resedimented volcaniclastic and volcanogenic sedimentary facies in central and northwestern exposures (near Rakiraki) indicates they are more proximal than those in the southeast (towards Viti Levu Bay). The proximal area coincides with one of two zones where NW-SE-trending mafic dykes are especially abundant, and it is close to several, small, dome-like intrusions of intermediate and felsic igneous rocks. The original surface morphology of the volcano is no longer preserved, though the partial fan of bedding dip azimuths in the south and east and the wide diameter (exceeding 20 km) are consistent with a broad shield.     

Vitriclastic lithofacies from Macquarie Island (Southern Ocean): compositional influence on abyssal eruption explosivity in a dying Miocene spreading ridge

Macquarie Island is composed of a complete section of oceanic crust that formed in a slow-spreading mid-ocean ridge 2.0 to 3.5 km below sea level. Vitriclastic facies preserved on the island have both pyroclastic and hyaloclastic characteristics. Monomict hyaloclastic breccia facies are widespread across the island and are predominantly composed of near-primitive (~7.9 wt% MgO) subalkaline/transitional (~0.7 wt% K₂O) sideromelane shards and crystalline basalt clasts with low vesicularity (LV, < 15% vesicles). Breccias are thick bedded and structureless with matrix-supported angular pillow fragments, bomb-sized fluidal mini-pillows, and globular glass lapilli. Clasts are lithologically similar to interbedded pillow basalts and laterally grade into fine-grained sandstone facies. These sandstones are normal-graded, well-laminated, thin bedded, and interstratified with red pelagic mudstone. Lithofacies associations indicate that the hyaloclastic breccias were formed proximal to a source vent via quench-fragmentation, and subsequently reworked by ocean-bottom currents into distal epiclastic sandstone facies. During eruption, co-genetic pillow lava and hypabyssal intrusions mingled with the breccia, forming fluidal peperite. Rare polymict pyroclastic facies only occur in the highest stratigraphic levels and are mostly composed of highly vesicular (HV, 15–50% vesicles) sideromelane shards and crystalline basalt clasts with alkaline (~1.0 wt% K₂O) fractionated (~6.8% MgO) compositions. Minor lithic grains are composed of subalkaline (~0.7 wt% K₂O) to very highly alkaline (~1.7 wt% K₂O) LV sideromelane shards, and amphibole-bearing diabase. The pyroclastic facies contains medium to thick beds of lapilli-tuff that exhibit both reverse and normal grading, diffuse lamination, and planar-grain fabric. These beds are locally overlain by thin fine-grained tuff beds entirely composed of cuspate to very thin elongate bubble-wall shards. These characteristics indicate that explosive deep-marine eruptions produced high-density coarse-grained gravity flows that were covered by slower suspension settle-out of delicate bubble-wall shards. Stratigraphic relationships suggest that explosive eruptions started during the waning stages of more alkaline volcanism along the proto-Macquarie spreading center.     

A Miocene coarse volcaniclastic mass-flow deposit in the Shimane Peninsula,SW Japan: product of a deep submarine eruption?

 A subaqueous volcaniclastic mass-flow deposit in the Miocene Josoji Formation, Shimane Peninsula, is 15–16 m thick, and comprises mainly blocks and lapilli of rhyolite and andesite pumices and non- to poorly vesiculated rhyolite. It can be divided into four layers in ascending order. Layer 1 is an inversely to normally graded and poorly sorted lithic breccia 0.3–6 m thick. Layer 2 is an inversely to normally graded tuff breccia to lapilli tuff 6–11 m thick. This layer bifurcates laterally into minor depositional units individually composed of a massive, lithic-rich lower part and a diffusely stratified, pumice-rich upper part with inverse to normal grading of both lithic and pumice clasts. Layer 3 is 2.5–3 m thick, and consists of interbedded fines-depleted pumice-rich and pumice-poor layers a few centimeters thick. Layer 4 is a well-stratified and well-sorted coarse ash bed 1.5–2 m thick. The volcaniclastic deposit shows internal features of high-density turbidites and contains no evidence for emplacement at a high temperature. The mass-flow deposit is extremely coarse-grained, dominated by traction structures, and is interpreted as the product of a deep submarine, explosive eruption of vesicular magma or explosive collapse of lava. Received: 10 January 1996 / Accepted: 23 February 1996     

Nature and origin of cone-forming volcanic breccias in the Te Herenga Formation, Ruapehu, New Zealand

 Volcanic breccias form large parts of composite volcanoes and are commonly viewed as containing pyroclastic fragments emplaced by pyroclastic processes or redistributed as laharic deposits. Field study of cone-forming breccias of the andesitic middle Pleistocene Te Herenga Formation on Ruapehu volcano, New Zealand, was complemented by paleomagnetic laboratory investigation permitting estimation of emplacement temperatures of constituent breccia clasts. The observations and data collected suggest that most breccias are autoclastic deposits. Five breccia types and subordinate, coherent lava-flow cores constitute nine, unconformity-bounded constructional units. Two types of breccia are gradational with lava-flow cores. Red breccias gradational with irregularly shaped lava-flow cores were emplaced at temperatures in excess of 580  °C and are interpreted as aa flow breccias. Clasts in gray breccia gradational with tabular lava-flow cores, and in some places forming down-slope-dipping avalanche bedding beneath flows, were emplaced at varying temperatures between 200 and 550  °C and are interpreted as forming part of block lava flows. Three textural types of breccia are found in less intimate association with lava-flow cores. Matrix-poor, well-sorted breccia can be traced upslope to lava-flow cores encased in autoclastic breccia. Unsorted boulder breccia comprises constructional units lacking significant exposed lava-flow cores. Clasts in both of these breccia types have paleomagnetic properties generally similar to those of the gray breccias gradational with lava-flow cores; they indicate reorientation after acquisition of some, or all, magnetization and ultimate emplacement over a range of temperatures between 100 and 550  °C. These breccias are interpreted as autoclastic breccias associated with block lava flows. Matrix-poor, well-sorted breccia formed by disintegration of lava flows on steep slopes and unsorted boulder breccia is interpreted to represent channel-floor and levee breccias for block lava flows that continued down slope. Less common, matrix-rich, stratified tuff breccias consisting of angular blocks, minor scoria, and a conspicuously well-sorted ash matrix were generally emplaced at ambient temperature, although some deposits contain clasts possibly emplaced at temperatures as high as 525  °C. These breccias are interpreted as debris-flow and sheetwash deposits with a dominant pyroclastic matrix and containing clasts likely of mixed autoclastic and pyroclastic origin. Pyroclastic deposits have limited preservation potential on the steep, proximal slopes of composite volcanoes. Likewise, these steep slopes are more likely sites of erosion and transport by channeled or unconfined runoff rather than depositional sites for reworked volcaniclastic debris. Autoclastic breccias need not be intimately associated with coherent lava flows in single outcrops, and fine matrix can be of autoclastic rather than pyroclastic origin. In these cases, and likely many other cases, the alternation of coherent lava flows and fragmental deposits defining composite volcanoes is better described as interlayered lava-flow cores and cogenetic autoclastic breccias, rather than as interlayered lava flows and pyroclastic beds. Reworked deposits are probably insignificant components of most proximal cone-forming sequences. Received: 1 October 1998 / Accepted: 28 December 1998     

The emplacement of an obsidian dyke through thin ice: Hrafntinnuhryggur, Krafla Iceland

An eruption along a 2.5 km-long rhyolitic dyke at Krafla volcano, northern Iceland during the last glacial period formed a ridge of obsidian (Hrafntinnuhryggur). The ridge rises up to 80 m above the surrounding land and is composed of a number of small-volume lava bodies with minor fragmental material. The total volume is < 0.05 km³. The lava bodies are flow- or dome-like in morphology and many display columnar-jointed sides typical of magma–ice interaction, quench-fragmented lower margins indicative of interaction with meltwater and pumiceous upper surfaces typical of subaerial obsidian flows. The fragmental material compromises poorly-sorted perlitic quench hyaloclastites and poorly-exposed pumiceous tuffs. Lava bodies on the western ridge flanks are columnar jointed and extensively hydrothermally altered. At the southern end of the ridge the feeder dyke is exposed at an elevation  95 m beneath the ridge crest and flares upwards into a lava body.Using the distribution of lithofacies, we interpret that the eruption melted through ice only 35–55 m thick, which is likely to have been dominated by firn. Hrafntinnuhryggur is therefore the first documented example of a rhyolitic fissure eruption beneath thin ice/firn. The eruption breached the ice, leading to subaerial but ice/firn-contact lava effusion, and only minor explosive activity occurred. The ridge appears to have been well-drained during the eruption, aided by the high permeability of the thin ice/firn, which appears not to have greatly affected the eruption mechanisms. We estimate that the eruption lasted between 2 and 20 months and would not have generated a significant jökulhlaup (< 70 m³ s^− 1).     

Eruptive conditions and depositional processes of Narbona Pass Maar volcano,Navajo volcanic field,Navajo Nation,New Mexico (USA)

Phreatomagmatic deposits at Narbona Pass, a mid-Tertiary maar in the Navajo volcanic field (NVF), New Mexico (USA), were characterized in order to reconstruct the evolution and dynamic conditions of the eruption. Our findings shed light on the temporal evolution of the eruption, dominant depositional mechanisms, influence of liquid water on deposit characteristics, geometry and evolution of the vent, efficiency of fragmentation, and the relative importance of magmatic and external volatiles. The basal deposits form a thick (5–20 m), massive lapilli tuff to tuff-breccia deposit. This is overlain by alternating bedded sequences of symmetrical to antidune cross-stratified tuff and lapilli tuff; and diffusely-stratified, clast-supported, reversely-graded lapilli tuffs that pinch and swell laterally. This sequence is interpreted to reflect an initial vent-clearing phase that produced concentrated pyroclastic density currents, followed by a pulsating eruption that produced multiple density currents with varying particle concentrations and flow conditions to yield the well-stratified deposits. Only minor localized soft-sediment deformation was observed, no accretionary lapilli were found, and grain accretion occurs on the lee side of dunes. This suggests that little to no liquid water existed in the density currents during deposition. Juvenile material is dominantly present as blocky fine ash and finely vesiculated fine to coarse lapilli pumice. This indicates that phreatomagmatic fragmentation was predominant, but also that the magma was volatile-rich and vesiculating at the time of eruption. This is the first study to document a significant magmatic volatile component in an NVF maar-diatreme eruption. The top of the phreatomagmatic sequence abruptly contacts the overlying minette lava flows, indicating no gradual drying-out period between the explosive and effusive phases. The lithology of the accidental clasts is consistent throughout the vertical pyroclastic stratigraphy, suggesting that the diatreme eruption did not penetrate below the base of the uppermost country rock unit, a sandstone aquifer ∼360 m thick. By comparison, other NVF diatremes several tens of kilometers away were excavated to depths of ∼1,000 m beneath the paleosurface (e.g., Delaney PT. Ship Rock, New Mexico: the vent of a violent volcanic eruption. In: Beus SS (ed) Geological society of America Centennial Field Guide, Rocky Mountain Section 2:411–415 (1987)). This can be accounted for by structurally controlled variations in aquifer thickness beneath different regions of the volcanic field. Variations in accidental clast composition and bedding style around the edifice are indicative of a laterally migrating or widening vent that encountered lateral variations in subsurface geology. We offer reasonable evidence that this subsurface lithology controlled the availability of external water to the magma, which in turn controlled characteristics of deposits and their distribution around the vent. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

A transition from strombolian to phreatomagmatic activity induced by a lava flow damming water in a valley

The Golan Heights is a Plio-Pleistocene volcanic plateau. Cinder cones of Late Pleistocene age are very common in the eastern and northern Golan, while phreatomagmatic deposits are relatively rare and occur just in two structures — the maar of Birket Ram and the tuff ring of Mt. Avital. The complex of Mt. Avital includes two large cinder cones, a tuff ring with an elongated central depression and several basaltic flows, some of them breach the cinder cones. The (exposed) eruptive history of the complex includes (1) an early stage of basaltic lava flows, (2) strombolian activity and the buildup of the southern cinder cone, (3) a second stage of basaltic flows and the buildup of the northern cinder cone, and then a transition to (4) phreatomagmatic explosions. The phreatomagmatic deposits include surges, lapilli fallout deposits and coarse-grained lithic tuff breccias, which were found up to 200 m above the central depression. Basaltic and scoriaceous clasts are the main component of all deposits, while juvenile material is usually a minor component, almost absent in the lapilli deposits.It is suggested that the phreatomagmatic events in Mt. Avital were induced by the infiltration of water from a lake that existed in a nearby topographic low (Quneitra Valley). The lake was formed or significantly expanded at about 300 ka due to a lava flow that blocked the drainage of the valley to the west. The interlayering of tuff and scoria at the top of the northern cinder cone and the good preservation of a lava flow top breccia under the surges imply that the phreatomagmatic activity immediately followed and even coincided with the last stages of strombolian activity. It is suggested that the dry–wet transition was triggered by the effusion of the second stage lavas and the buildup of the northern cinder cone, which probably caused a reduction of pressure in the magmatic system and allowed the lake water an access to the magmatic system. The minimum age of the phreatomagmatic events is determined by a 54 ka Musterian site which lies directly on top of the tuff in the Quneitra Valley.     

Snow-contact volcanic facies and their use in determining past eruptive environments at Nevados de Chillán volcano, Chile

Studies of the eruptive products from volcanoes with variable ice and snow cover and a long history of activity enable reconstruction of erupted palaeoenvironments, as well as highlighting the hazards associated with meltwater production, such as jökulhlaups and magma-water interaction. Existing difficulties include estimation of ice/snow thicknesses and discrimination between ice- and snow-contact lithofacies. We present field evidence from the Cerro Blanco subcomplex of Nevados de Chillán stratovolcano, central Chile, which has erupted numerous times in glacial and non-glacial periods and most recently produced andesitic lava flows in the 1861–1865 eruption from the Santa Gertrudis cone on the northwest flank of the volcano. The main period of lava effusion occurred during the winter of 1861 when the upper flanks of the volcano were reportedly covered in snow and ice. The bases and margins of the first lava flows produced are cut by arcuate fractures, which are interpreted as snow-contact features formed when steam generated from the melting of snow entered tensional fractures at the flow base. In contrast, the interiors and upper parts of these flows, as well as the overlying flow units, have autobrecciated and blocky textures typical of subaerial conditions, due to insulation by the underlying lava. Similar textures found in a lava flow dated at 90.0±0.6 ka that was emplaced on the northwest flank of Cerro Blanco, are also inferred to be ice and snow-contact features. These textures have been used to infer that a small valley glacier, overlain by snow, existed in the Santa Gertrudis Valley at the time of the eruption. Such reconstructions are important for determining the long-term evolution of the volcano as well as assessing future hazards at seasonally snow-covered volcanoes.     

Mafic alkalic magmatism in central Kachchh,India: a monogenetic volcanic field in the northwestern Deccan Traps

Magmatism in Kachchh, in the northwestern Deccan continental flood basalt province, is represented not only by typical tholeiitic flows and dikes, but also plug-like bodies, in Mesozoic sandstone, of alkali basalt, basanite, melanephelinite and nephelinite, containing mantle nodules. They form the base of the local Deccan stratigraphy and their volcanological context was poorly understood. Based on new and published field, petrographic and geochemical data, we identify this suite as an eroded monogenetic volcanic field. The plugs are shallow-level intrusions (necks, sills, dikes, sheets, laccoliths); one of them is known to have fed a lava flow. We have found local peperites reflecting mingling between magmas and soft sediment, and the remains of a pyroclastic vent composed of non-bedded lapilli tuff breccia, injected by mafic alkalic dikes. The lapilli tuff matrix contains basaltic fragments, glass shards, and detrital quartz and microcline, with secondary zeolites, and there are abundant lithic blocks of mafic alkalic rocks. We interpret this deposit as a maar-diatreme, formed due to phreatomagmatic explosions and associated wall rock fragmentation and collapse. This is one of few known hydrovolcanic vents in the Deccan Traps. The central Kachchh monogenetic volcanic field has >30 individual structures exposed over an area of ∼1,800 km² and possibly many more if compositionally identical igneous intrusions in northern Kachchh are proven by future dating work to be contemporaneous. The central Kachchh monogenetic volcanic field implies low-degree mantle melting and limited, periodic magma supply. Regional directed extension was absent or at best insignificant during its formation, in contrast to the contemporaneous significant directed extension and vigorous mantle melting under the main area of the Deccan flood basalts. The central Kachchh field demonstrates regional-scale volcanological, compositional, and tectonic variability within flood basalt provinces, and adds the Deccan Traps to the list of such provinces containing monogenetic- and/or hydrovolcanism, namely the Karoo-Ferrar and Emeishan flood basalts, and plateau basalts in Saudi Arabia, Libya, and Patagonia.     

Subaqueous, basaltic lava dome and carapace breccia on King George Island, South Shetland Islands, Antarctica

 On King George Island during latest Oligocene/earliest Miocene time, submarine eruptions resulted in the emplacement of a small (ca. 500 m estimated original diameter) basalt lava dome at Low Head. The dome contains a central mass of columnar rock enveloped by fractured basalt and basalt breccia. The breccia is crystalline and is a joint-block deposit (lithic orthobreccia) interpreted as an unusually thick dome carapace breccia cogenetic with the columnar rock. It was formed in situ by a combination of intense dilation, fracturing and shattering caused by natural hydrofracturing during initial dome effusion and subsequent endogenous emplacement of further basalt melt, now preserved as the columnar rock. Muddy matrix with dispersed hyaloclastite and microfossils fills fractures and diffuse patches in part of the fractured basalt and breccia lithofacies. The sparse glass-rich clasts formed by cooling-contraction granulation during interaction between chilled basalt crust and surrounding water. Together with muddy sediment, they were injected into the dome by hydrofracturing, local steam fluidisation and likely explosive bulk interaction. The basalt lava was highly crystallised and degassed prior to extrusion. Together with a low effusion temperature and rapid convective heat loss in a submarine setting, these properties significantly affected the magma rheology (increased the viscosity and shear strength) and influenced the final dome-like form of the extrusion. Conversely, high heat retention was favoured by the degassed state of the magma (minimal undercooling), a thick breccia carapace and viscous shear heating, which helped to sustain magmatic (eruption) temperatures and enhanced the mobility of the flow. Received: 1 August 1996 / Accepted: 15 September 1997     

The Miocene Costa Giardini diatreme,Iblean Mountains,southern Italy: model for maar-diatreme formation on a submerged carbonate platform

In this paper we present a model for the growth of a maar-diatreme complex in a shallow marine environment. The Miocene-age Costa Giardini diatreme near Sortino, in the region of the Iblei Mountains of southern Sicily, has an outer tuff ring formed by the accumulation of debris flows and surge deposits during hydromagmatic eruptions. Vesicular lava clasts, accretionary lapilli and bombs in the older ejecta indicate that initial eruptions were of gas-rich magma. Abundant xenoliths in the upper, late-deposited beds of the ring suggest rapid magma ascent, and deepening of the eruptive vent is shown by the change in slope of the country rock. The interior of the diatreme contains nonbedded breccia composed of both volcanic and country rock clasts of variable size and amount. The occurrence of bedded hyaloclastite breccia in an isolated outcrop in the middle-lower part of the diatreme suggests subaqueous effusion at a low rate following the end of explosive activity. Intrusions of nonvesicular magma, forming plugs and dikes, occur on the western side of the diatreme, and at the margins, close to the contact between breccia deposits and country rock; they indicate involvement of volatile-poor magma, possibly during late stages of activity. We propose that initial hydromagmatic explosive activity occurred in a shallow marine environment and the ejecta created a rampart that isolated for a short time the inner crater from the surrounding marine environment. This allowed explosive activity to draw down the water table in the vicinity of the vent and caused deepening of the explosive center. A subsequent decrease in the effusion rate and cessation of explosive eruptions allowed the crater to refill with water, at which time the hyaloclastite was deposited. Emplacement of dikes and plugs occurred nonexplosively while the breccia sediment was mostly still soft and unconsolidated, locally forming peperites. The sheltered, low-energy lagoon filled with marine limestones mixed with volcaniclastic material eroded from the surrounding ramparts. Ultimately, lagoonal sediments accumulated in the crater until subsidence or erosion of the tuff ring caused a return to normal shallow marine conditions.     

Early Proterozoic,basaltic andesite tuff-breaccia: downslope,subaqueous mass transport of phreatomagmatically-generated tephra

At Bear Lake, in the Flin Flon-Snow Lake greenstone belt of Manitoba, 400⁺ m of thick-to very thick-bedded, generally ungraded, basaltic andesite tuff-breccia, breccia, and lapilli-tuff are intercalated with pillowed lava flows in the upper part of an early Proterozoic submarine basaltic andesite shield volcano. The fragmental rocks comprise angular, amygdaloidal blocks and lapilli, many with partial chilled selvages, in a matrix of blocky, non-amygdaloidal to highly amygdaloidal vitric basaltic andesite ash and small lapilli. Minor thin-to medium-bedded, commonly normally graded tuff occurs in the upper part of the sequence. Clasts in fragmental beds consistently have higher amygdule contents than intercalated lava flows. Although similar to pillow-fragment breccias, the Bear Lake fragmental rocks were produced by extended surtseyan-type, phreatomagmatic eruptions, with associated fire fountain activity, at a progressively subsiding, shallow water vent. Periodic tephra slumping generated debris flows that transported particles down the uppe, gentle slope of the volcano to a depositional site at a water depth of less than 1 km. Turbidity currents probably carried much fine tephra to deeper water; tuff was deposited in the preserved section only after explosive volcanism ceased.