The late Pleistocene pyroclastic deposits of the Campanian Plain: New insights into the explosive activity of Neapolitan volcanoes

The lithological and compositional characteristics of eighteen different pyroclastic deposits of Campanian origin, dated between 125 cal ky BP and 22 cal ky BP, were described. The pyroclastic deposits were correlated among different outcrops mainly located on the Apennine slopes that border the southern Campanian Plain. They were grouped in two main stratigraphic and chronologic intervals of regional significance: a) between Pomici di Base (22.03 cal ky BP; Somma–Vesuvius) and Campanian Ignimbrite (39 cal ky BP; Campi Flegrei) eruptions; and b) older than Campanian Ignimbrite eruption. Three new ¹⁴C AMS datings support the proposed correlations. Six eruptions were attributed to the Pomici di Base-Campanian Ignimbrite stratigraphic interval, while twelve eruptions are older than Campanian Ignimbrite. Of the studied deposits two originated from Ischia island, five are related to Campi Flegrei, and three to Somma–Vesuvius. Two eruptions have an uncertain correlation with Somma–Vesuvius or Campi Flegrei, while six eruptions remain of uncertain source. Minimum volumes of five eruptions were assessed, ranging between 0.5 km³ and 4 km³. Two of the studied deposits were correlated with Y-3 and X-5 tephra layers, which are widely dispersed in the central Mediterranean area. The new stratigraphic and chronologic data provide an upgraded chrono-stratigraphy for the explosive activity of Neapolitan volcanoes in the period between 125 and 22 cal ky BP.     

The structure of the Campanian Plain and the activity of the Neapolitan volcanoes (Italy)

The central Campanian Plain is dominated by the structural depression of Acerra whose origin is tectonic, but may have been enlarged and further depressed after the eruption of the Campanian Ignimbrite (42-25 ka). The deposits of the Campanian Ignimbrite are possibly the results of multiple eruptions with huge pyroclastic deposits that covered all the Campanian Plain.The more recent activity of Vesuvius, Campi Flegrei and Procida occurred on the borders of Acerra depression and resulted from a reactivation of regional faults after the Campanian Ignimbrite cycle. The activity of Vesuvius produced the building of a stratovolcano mostly by effusive and plinian explosive eruptions. The Campi Flegrei area, on the contrary, was dominated by the eruption of the Neapolitan Yellow Tuff at 12 ka that produced a caldera collapse of the Gulf of Pozzuoli. The caldera formation controlled the emplacement of the recent activity of Campi Flegrei and the new volcanoes were formed only within the caldera or along its rim.     

C age of the “Museum Breccia” (Campi Flegrei) and its relevance for the origin of the Campanian Ignimbrite

Field stratigraphic investigations and AMS ¹⁴C dating of carbon particles in paleosols has resulted in a framework of the sequence and age of the pyroclastic products in the Campi Flegrei area of Southern Italy. The Museum Breccia cannot be the early phase of the Campanian Ignimbrite, as was previously believed, but is from a smaller and later eruption with an age of approximately 17,900 y B.P. This date also precludes its correlation with the Neapolitan Yellow Tuff (12,000 y B.P.)     

Isotopic evidence for open system processes within the Campanian Ignimbrite (Campi Flegrei–Italy) magma chamber

New Sr and Nd isotope data for whole rocks, glasses and minerals are combined to reconstruct the nature and origin of mixing end-members of the 200 km³ trachytic to phonolitic Campanian Ignimbrite (Campi Flegrei, Italy) magmatic system. The least-evolved magmatic end-member shows equilibrium between host glass and the majority of the phenocrysts and is less radiogenic in Sr and Nd than the most-evolved magma. On the contrary, only the Fe-rich pyroxene from the most-evolved erupted magma is in equilibrium with the matrix glass, while all other minerals are in isotopic disequilibrium. These magmas mixed prior to and during the Campanian Ignimbrite eruption and minerals were freely exchanged between the magma batches. Combining the results of the geochemical investigations on magma end-members with geophysical and geological data, we develop the following scenario. In stage 1, a parental, less differentiated magma rose into the middle crust, and evolved through combined crustal assimilation and crystal fractionation. In stage 2, the differentiated magma rose to shallower depth, fed the pre-Campanian Ignimbrite activity and evolved by further open-system processes into the most-evolved and most-radiogenic Campanian Ignimbrite end-member magma. In stage 3, new trachytic magma, isotopically distinct from the pre-Campanian Ignimbrite magmas, rose from ca. 6 km to shallower depth, recharged the most-evolved pre-Campanian Ignimbrite magma chamber, and formed the large and stratified Campanian Ignimbrite magmatic system. During the course of the Campanian Ignimbrite eruption, the two layers were tapped separately and/or simultaneously, and gave rise to the range of chemical and isotopic values displayed by the Campanian Ignimbrite pumices, glasses and minerals.     

Magma chamber evolution prior to the Campanian Ignimbrite and Neapolitan Yellow Tuff eruptions (Campi Flegrei,Italy)

The Campi Flegrei (Campanian Region, Italy) experienced two cataclysmic caldera-forming eruptions which produced the Campanian Ignimbrite (39 ka, CI) and the Neapolitan Yellow Tuff (15 ka, NYT). We studied the minor eruptions before both these large events to understand magma chamber evolution leading towards such catastrophic eruptions. Major, trace element, and Sr and Nd isotope compositions of pre-Campanian Ignimbrite and pre-Neapolitan Yellow Tuff products define distinct geochemical groups, which are here interpreted as distinct magma batches. These batches do not show any transitional trend towards the CI and NYT eruptions. The CI and NYT systems are decoupled geochemically and isotopically. At least one of the pre-CI and one of the pre-NYT erupted magma batches qualifies as mixing endmembers for the large CI and NYT eruptions, and thus, must have been stored in reservoirs for some time to remain available for the CI and NYT eruptions. The least evolved, isotopically distinct magma compositions that are typical of the last phases of the NYT and CI eruptions did not occur before caldera-forming events. Based on the new data, we propose the following scenario: Multiple magma chambers with distinct compositions existed below the Campi Flegrei before the CI and NYT eruptions and remained generally separated for some time unless new magma was recharged. In each case, one of the residing magma reservoirs was recharged by a new large-volume magma input of intermediate composition from a deeper differentiating magma reservoir. This may have triggered the coalescence of the previously separated reservoirs into one large chamber which fed the cataclysmic caldera-forming eruption. Large magma chambers in the Campi Flegrei may therefore be ephemeral features, interrupted by periods of evolution in individual, separated magma reservoirs.     

The flow dynamics of an extremely large volume pyroclastic flow,the 2.08-Ma Cerro Galán Ignimbrite,NW Argentina,and comparison with other flow types

The 2.08-Ma Cerro Galán Ignimbrite (CGI) represents a >630-km³ dense rock equivalent (VEI 8) eruption from the long-lived Cerro Galán magma system (∼6 Ma). It is a crystal-rich (35–60%), pumice (<10% generally) and lithic-poor (<5% generally) rhyodacitic ignimbrite, lacking a preceding plinian fallout deposit. The CGI is preserved up to 80 km from the structural margins of the caldera, but almost certainly was deposited up to 100 km from the caldera in some places. Only one emplacement unit is preserved in proximal to medial settings and in most distal settings, suggesting constant flow conditions, but where the pyroclastic flow moved into a palaeotopography of substantial valleys and ridges, it interacted with valley walls, resulting in flow instabilities that generated multiple depositional units, often separated by pyroclastic surge deposits. The CGI preserves a widespread sub-horizontal fabric, defined by aligned elongate pumice and lithic clasts, and minerals (e.g. biotite). A sub-horizontal anisotropy of magnetic susceptibility fabric is defined by minute magnetic minerals in all localities where it has been analysed. The CGI is poor in both vent-derived (‘accessory’) lithics and locally derived lithics from the ground surface (‘accidental’) lithics. Locally derived lithics are small (<20 cm) and were not transported far from source points. All data suggest that the pyroclastic flow system producing the CGI was characterised throughout by high sedimentation rates, resulting from high particle concentration and suppressed turbulence at the depositional boundary layer, despite being a low aspect ratio ignimbrite. Based on these features, we question whether high velocity and momentum are necessary to account for extensive flow mobility. It is proposed that the CGI was deposited by a pyroclastic flow system that developed a substantial, high particle concentration granular under-flow, which flowed with suppressed turbulence. High particle concentration and fine-ash content hindered gas loss and maintained flow mobility. In order to explain the contemporaneous maintenance of high particle concentration, high sedimentation rate at the depositional boundary layer and a high level of mobility, it is also proposed that the flow(s) was continuously supplied at a high mass feeding rate. It is also proposed that internal gas pressure within the flow, directed downwards onto the substrate over which the flow was passing, reduced the friction between the flow and the substrate and also enhanced its mobility. The pervasive sub-horizontal fabric of aligned pumice, lithic and even biotite crystals indicates a consistent horizontal shear force existed during transport and deposition in the basal granular flow, consistent with the existence of a laminar, shearing, granular flow regime during the final stages of transport and deposition.     

Stress pattern at Campi Flegrei from focal mechanisms of the 1982–1984 earthquakes (southern Italy)

Campi Flegrei is a Holocene volcanic area in the Campanian Plain (Southern Italy) within the Apennine Chain, a neogenic thrust belt built up since the Middle Miocene. The volcanic complex consists of a c. 12-km-diameter caldera containing several monogenetic volcanoes, the youngest of which (Monte Nuovo) erupted in 1538. Since at least Roman times, the area has also been affected by slow vertical movements (bradiseismic activity). Between 1982 and 1985, this slow motion was interrupted by a period of more rapid displacement which caused a maximum uplift of 180 cm in the town of Pozzuoli. To model the local stress field associated with the uplift, the Angelier inversion technique has been applied using the focal mechanisms of forty-nine earthquakes which occurred between April 1982 and December 1984. The results show that doming coupled with a regional extensional strain can account for the seismic phenomena that affected the area.     

Vent area and depositional mechanisms of the Upper Member of the Neapolitan Yellow Tuff (Campi Flegrei, Italy): new insights from directional fabric through image analysis

In order to provide new information about the source area and depositional mechanisms of the Upper Member of the Neapolitan Yellow Tuff (NYT), a prominent pyroclastic deposit of the Campi Flegrei Volcanic District (southern Italy), statistics on directional fabric, by means of computer-assisted image analysis on 32 rock samples, were compiled. Seventeen samples were collected along vertical direction on two selected exposures and fifteen were taken from outcrops widely distributed all around the Campi Flegrei Volcanic District. Fabric measurements within the investigated successions reveal a vertically homogeneous direction of the mean particle iso-orientation, with considerable variability in the strength of particle iso-orientation even at cm-scale. The existence of particle iso-orientation can be related to continuous sedimentation from a concentrated bedload region beneath suspension currents, producing massive or inversely graded beds by traction carpet sedimentation. The considerable vertical variability in the strength of iso-orientation is the result of very unstable flow regimes, up to the extreme condition of discrete depositional events, with a variable combination of traction carpet and/or direct suspension sedimentation. The vertical homogeneity in the mean orientation values, found in the investigated sections, may derive from the sequential deposition of laminae to thin beds, whose relatively flat upper surfaces were unable to significantly deflect the depositional system of the following currents. According to the observed homogeneous mean particle orientation values along the investigated vertical profiles, samples collected through areal distribution are considered representative of the local paleo-flow directions of the whole deposit. The mean directions of the samples collected areally show two different coherent patterns which point to the existence of two different source areas. The first, which includes all samples from the northern outcrops, appears to converge in a narrow area about 2 km NE of the town of Pozzuoli, largely in coincidence with the inferred area on the basis of the pumice fall distribution. The second, which includes samples from Capo Miseno and Posillipo areas, points to the central part of the Pozzuoli Bay, about 4 km offshore the town of Pozzuoli.     

The Breccia Museo formation, Campi Flegrei, southern Italy: geochronology, chemostratigraphy and relationship with the Campanian Ignimbrite eruption

The Breccia Museo is one of the most debated volcanic formations of the Campi Flegrei volcanic district. The deposit, made up of six distinctive stratigraphic units, has been interpreted by some as the proximal facies of the major caldera-forming Campanian Ignimbrite eruption, and by others as the product of several, more recent, independent and localized events. New geochemical and chemostratigraphical data and Ar–Ar age determinations for several units of the Breccia Museo deposits (~39 ka), correlate well with the Campanian Ignimbrite-forming eruption. The chemical zoning of the Breccia Museo deposits is interpreted here to be a consequence of a three-stage event that tapped a vertically zoned trachytic magma chamber. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

The campanian ignimbrite: a major prehistoric eruption in the Neapolitan area (Italy)

A geological, chemical and petrographical study of the Campanian ignimbrite, a pyroclastic flow deposit erupted about 30,000 years ago on the Neapolitan area (Italy), is reported. The ignimbrite covered an area of at least 7,000 km²; it consists of a single flow unit, and the lateral variations in both pumice and lithic fragments indicate that the source was located in the Phlegraean Fields area. Textural features, areal distribution and its morphological constraints suggests that the eruption was of the type of highly expanded low-temperature pyroclastic cloud. The original composition was strongly modified by post-depositional chemical changes involving most of the major and trace elements. No primary differences in the composition of the magma have been recognized. The Campanian ignimbrite is a nearly saturated potassic trachyte, similar to many other trachytes of the Quaternary volcanic province of Campania. Its chemistry indicates an affinity with the so-called «low-K association» of the Roman volcanic province.     

Instantaneous dynamic pressure effects on the behaviour of lithic boulders in pyroclastic flows: the Abrigo Ignimbrite,Tenerife, Canary Islands

A method for estimating the instantaneous dynamic pressure near the base of ancient pyroclastic flows, using large lithic boulders from the late Pleistocene Abrigo Ignimbrite, is proposed here. The minimum instantaneous dynamic pressure is obtained by determining the minimum aerodynamic drag force exerted by a pyroclastic flow onto a stationary boulder that will allow the boulder to overcome static friction with the underlying substrate, and move within the flow. Consideration is given to the properties of the boulder (shape, roughness, size, density and orientation relative to the flow), substrate (type and hill slope angle), boulder-substrate interface (looseness of boulder, coefficient of static friction) and flow (coefficient of aerodynamic drag). Nineteen boulders from massive, lithic-rich ignimbrite deposits at two localities on Tenerife were assessed in this study. Minimum dynamic pressures required for Abrigo pyroclastic flows to move these boulders ranged from 5 to 38 kPa, which are comparable to dynamic pressures previously calculated from observations of the damage caused by recent pyroclastic flows. Considering the maximum possible range in flow density, the derived minimum velocity range for the Abrigo pyroclastic flows is 1.3 to 87 m s⁻¹.     

Mamaku Ignimbrite: a caldera-forming ignimbrite erupted from a compositionally zoned magma chamber in Taupo Volcanic Zone, New Zealand

Mamaku Ignimbrite was deposited during the formation of Rotorua Caldera, Taupo Volcanic Zone, New Zealand, 220–230 ka. Its outflow sheet forms a fan north, northwest and southwest of Rotorua, capping the Mamaku–Kaimai Plateau. Mamaku Ignimbrite can be divided into a partly phreatomagmatic basal sequence, and a main sequence which comprises lower, middle, and upper ignimbrite. The internal stratigraphy indicates that it was emplaced progressively from a pyroclastic density current of varying energy that became less particulate away from source. Gradational contacts between lower, middle, and upper ignimbrite are consistent with it being deposited during one eruptive event from the same source. Variations in lithic clast content and coexistence of different pumice types through the ignimbrite sequence indicate that caldera collapse occurred throughout the eruption, but particularly when middle Mamaku Ignimbrite was deposited and in the final stages of deposition of upper Mamaku Ignimbrite. Maximum lithic data and the location of lithic lag breccias in upper Mamaku Ignimbrite confirm Rotorua Caldera as the source. At least 120 m of geothermally altered intra-caldera Mamaku Ignimbrite occurs inside Rotorua Caldera. Pumice clasts in the Mamaku Ignimbrite are dacite to high-silica rhyolite and can be chemically divided into three types: high–silica rhyolite (type 1), rhyolite (type 2), and dacite (type 3). All are petrogenetically related and types 1 and 2 may be derived by up to 20% crystal fractionation from the type 3 dacite. All three types probably resided in a single, gradationally zoned magma chamber. Andesitic juvenile fragments are found only in upper Mamaku Ignimbrite and inferred to represent a discrete magma that was injected into the silicic chamber and is considered to have accumulated as a sill at the base of the magma chamber. The contrast in density between the andesitic and silicic magmas did not allow eruption of the andesitic fragments during the deposition of lower and middle Mamaku Ignimbrite. The advanced stage of caldera collapse, late in the main eruptive phase, created withdrawal dynamics that allowed andesitic magma to reach the surface as fragments within upper Mamaku Ignimbrite.     

The Neapolitan Yellow Tuff — A large volume multiphase eruption from Campi Flegrei,Southern Italy

the Neapolitan Yellow Tuff (NYT) (12 ka BP) is considered to be the product of a single eruption. Two different members (A and B) have been identified and can be correlated around the whole of Campi Flegrei. Member A is made up of at least 6 fall units including both ash and lapilli horizons. The basal stratified ash unit (A1) is interpreted to be a phreatoplinian fall deposit, since it shows a widespread dispersal (>1000 km²) and a constant thickness over considerable topography. The absence of many lapilli fall units in proximal and medial areas testifies to the erosive power of the intervening pyroclastic surges. The overlying member B was formed by many pyroclastic flows, radially distributed around Campi Flegrei, that varied widely in their eruptive and emplacement mechanisms. In some of the most proximal exposures coarse scoria and lithic-rich deposits, sometimes welded, have been identified at the base of member B. Isopach and isopleth maps of fall-units, combined with the distribution of the coarse proximal facies, indicate that the eruptive vent was located in the NE area of Campi Flegrei. It is considered that the NYT eruption produced collapse of a caldera approximately 10 km diameter within Campi Flegrei. The caldera rim, located by geological and borehole evidence, is now largely buried by the products of more recent eruptions. Initiation of caldera collapse may have been contemporaneous with the start of the second phase (member B). It is suggested that there was a single vent throughout the eruption rather than the development of multiple or ring vents. Chemical data indicate that different levels of a zoned trachyte-phonolite magma chamber were tapped during the eruption. The minimum volume of the NYT is calculated to be about 50 km³ (DRE), of which 35 km³ (70%) occurs within the caldera.     

Hazard assessment at volcanic fields: the Campi Flegrei case history

Volcanological analysis of the 10 000 yr –1538 explosive activity at Campi Flegrei shows that the most common explosive eruptions are characterized by the emplacement of flow or surge deposits, originating from the interaction between magma and shallow and/or sea water. The minimum volumes of pyroclastic products range between 0.04 and 0.7 km³; the proximal areas covered by these products range from 3–4 to 40–50 km². The pyroclastic flow and surge deposits occurring inside the caldera have been strongly controlled by pre-existent morphology; because of this, the area of present Napoli city was blanketed by approximately 5 m of pyroclastic deposits, during the last 5000 yr.Previous analysis suggests that the presence of even very low topographic obstacles may influence pyroclastic density current run out such that future eruptive deposits would mainly be confined inside the caldera rim. We suggest that a future eruption at Campi Flegrei would not seriously involve the urbanized area of Napoli city located on the hills. On the contrary, the plains located on the eastern side of the caldera (Fuorigrotta, Bagnoli) would be the most damaged area.     

Interaction between caldera collapse and eruptive dynamics during the Campanian Ignimbrite eruption,Phlegraean Fields,Italy

The Campanian Ignimbrite (36000 years B.P.) was produced by the explosive eruption of at least 80 km³ DRE of trachytic ash and pumice which covered most of the southern Italian peninsula and the eastern Mediterranean region. The eruption has been related to the 12-x15-km-diameter caldera located in the Phlegraean Fields, west of Naples. Proximal deposits on the periphery of the Phlegraean Fields comprise the following pyroclastic sequence from base to top: densely welded ignimbrite and lithic-rich breccias (unit A); sintered ignimbrite, low-grade ignimbrite and lithic-rich breccia (unit B); lithic-rich breccia and spatter agglutinate (unit C); and low-grade ignimbrite (unit D). Stratigraphic and componentry data, as well as distribution of accidental lithic types and the composition of pumice clasts of different units, indicate that coarse, lithic-rich breccias were emplaced at different stages during the eruption. Lower breccias are associated with fines-rich ignimbrites and are interpreted as co-ignimbrite lag breccia deposits. The main breccia unit (C) does not grade into a fines-rich ignimbrite, and therefore is interpreted as formed from a distinct lithic-rich flow. Units A and B exhibit a similar pattern of accidental lithic types, indicating that they were erupted from the same area, probably in the E of the caldera. Units C and D display a distinct pattern of lithics indicating expulsion from vent(s) that cut different areas. We suggest that unit C was ejected from several vents during the main stage of caldera collapse. Field relationships between spatter agglutinate and the breccia support the possibility that these deposits were erupted contemporaneously from vents with different eruptive style. The breccia may have resulted from a combination of magmatic and hydrothermal explosive activity that accompanied extensive fracturing and subsidence of the magma-chamber roof. The spatter rags probably derived from sustained and vigorous pyroclastic fountains. We propose that the association lithic-rich breccia and spatter agglutinate records the occurrence of catastrophic piecemeal collapse.     

An ignimbrite veneer deposit: The trail-marker of a pyroclastic flow

The term “ignimbrite veneer deposit” (IVD) is proposed for a new kind of pyroclastic deposit which is found associated with, and passes laterally into, Taupo ignimbrite of valley pond type in New Zealand. It forms a thin layer mantling the landscape over 15,000 km², and is regarded as the deposit from the trailing “tail” of a pyroclastic flow, where a relaxation of shear stress favoured the deposition of the basal part of the flow. The IVD differs little in grain-size from the associated ignimbrite, but it shows a crude internal stratification attributed to the deposition of a succession of layers, one after the passage of each pulse of the pyroclastic flow. It locally contains laterally-discontinuous lenses of coarse pumice (“lee-side lenses”) on the far-vent side of topographic obstacles. In nearvent exposures the Taupo IVD shows lensoid and cross-stratified bed-forms even where it stands on a planar surface, attributed to deposition from a flow travelling at an exceedingly high velocity.An IVD can be distinguished from a poorly sorted pyroclastic fall deposit because the beds in it show more rapid lateral variations in thickness, it may show a low-angle cross-stratification, and it contains carbonised wood from trees not in the position of growth; from the deposit of a wet base surge because it lacks vesicles and strong antidune-like structures and contains carbonised vegetation, and from a hot and dry pyroclastic surge deposit because it possesses a high content of pumice and “fines”.The significance of an IVD is that it records the passage of a pyroclastic flow, where the flow itself has moved farther on.     

Asymmetric,multiple-block collapse at Rotorua Caldera,Taupo Volcanic Zone,New Zealand

Calderas worldwide have been classified according to their dominant collapse styles, although there is a good deal of speculation about the processes involved. Recent laboratory experiments have tried to constrain these processes by modelling magma withdrawal and observing the effects on overlying materials. However, many other factors also contribute to final caldera morphology. Rotorua Caldera formed during the eruption of the Mamaku Ignimbrite. Collapse structure and evolution of Rotorua Caldera is interpreted based its geophysical response, geology and geomorphology, and the stratigraphy of the Mamaku Ignimbrite. Rotorua Caldera is situated at the edge of the extensional Taupo Volcanic Zone, in which major faults strike NE-SW. A second, less dominant fault set strikes NW-SE. These two fault sets have a strong influence on the morphology of Rotorua Caldera. No one style of collapse can be applied to Rotorua Caldera; it was formed during a single eruption, but subsided as many blocks and shows features of trapdoor, piecemeal and downsag types of collapse. Here Rotorua Caldera is described, according to its composition, activity and geometry, as a rhyolitic, single event, asymmetric, multiple-block, single locus collapse structure. The Mamaku Ignimbrite is the only ignimbrite to have erupted from Rotorua Caldera. Extracaldera thickness of the Mamaku Ignimbrite is up to 145 m, whereas inside the caldera it may be greater than 1 km thick. The Mamaku Ignimbrite can be separated into a basal tephra sequence and main ignimbrite sequence. The main ignimbrite sequence contains no observable flow unit boundaries but can be split into lower, middle and upper parts (LMI, mMI, uMI respectively) based on crystal content, welding, jointing, devitrification and vapour phase alteration. Juvenile clasts within the ignimbrite comprise three consanguineous silicic pumice types and andesitic fragments. Only the most evolved pumice type occurs in the basal tephra sequence. All three pumice types occur together throughout the main ignimbrite sequence, whereas the andesitic fragments are only present in uMI. Lithic lag breccias in uMI indicate a late stage of caldera collapse. Concentration of lithic fragments increases towards the middle of the ignimbrite, and may also reflect increased subsidence rate during an earlier stage. Collapse of Rotorua Caldera is thought to have occurred throughout the eruption of the main ignimbrite sequence of the Mamaku Ignimbrite, allowing simultaneous eruption of all the different pumice types and causing the abrupt transition from deposition of the basal tephra sequence to the main ignimbrite sequence.     

Magnetic fabric, welding texture and strain fabric in the Nuraxi Tuff, Sardinia, Italy

Anisotropy of magnetic susceptibility (AMS) has been used to interpret flow directions in ignimbrites, but no study has demonstrated that the AMS fabric corresponds to the flow fabric. In this paper, we show that the AMS and strain fabric coincide in a high-grade ignimbrite, the Nuraxi Tuff, a Miocene rhyolitic ignimbrite displaying a wide variability of rheomorphic features and a well-defined magnetic fabric. Natural remanent magnetization (NRM) data indicate that the magnetization of the tuff is homogeneous and was acquired at high temperatures by Ti-magnetite crystals. Comparison between the magnetic fabric and the deformation features along a representative section shows that AMS and anisotropy of isothermal remanent magnetization (AIRM) fabric are coaxial with and reproduce the shape of the strain ellipsoid. Magnetic tests and scanning electron microscopy observations indicate that the fabric is due to trails of micrometer-size, pseudo-single domain, magnetically interacting magnetite crystals. Microlites formed along discontinuities such as shard rims and vesicle walls mimicking the petrofabric of the tuff. The fabric was thus acquired after deposition, before late rheomorphic processes, and accurately mimics homogeneous deformation features of the shards during welding processes and mass flow.     

Variability in eruptive dynamics associated with caldera collapse: an example from two successive eruptions at Batur volcanic field,Bali, Indonesia

Batur volcanic field (BVF) in Bali, Indonesia, underwent two successive caldera-forming eruptions, CI and CII (29,300 and 20,150 years b.p., respectively) that resulted in the deposition of dacitic ignimbrites. The respective ignimbrites show contrasted stratigraphies, exemplify the variability of dynamics associated with caldera-forming eruptions and provide insights into the possible controls exerted by caldera collapse mechanisms. The Ubud Ignimbrite is widespread and covers most of southern Bali. The deposits consist dominantly of pyroclastic flow with minor pumice fall deposits. The intra-caldera succession comprises three distinct, partially to densely welded cooling units separated by non-welded pyroclastic flow and fall deposits. The three cooling units consist of pyroclastic flow deposits only and together represent up to 16 distinct flow units, each including a thin, basal, lithic-rich breccia. This eruption was related to a 13.5×10 km caldera (CI) with a minimum collapsed volume of 62 km³. The floor of caldera CI is inferred to have a piecemeal geometry. The Ubud Ignimbrite is interpreted as the product of a relatively long-lasting, pulsating, collapsing fountain that underwent at least two time breaks. A stable column developed during the second time break. Discharge rate was high overall, but oscillatory, and increased toward the end of the eruption. These dynamics are thought to reflect sequential collapse of the CI structure. The Gunungkawi Ignimbrite is of more limited extent outside the source caldera and occurs only in central southern Bali. The Gunungkawi Ignimbrite proximal deposits consist of interbedded accretionary lapilli-bearing ash surge, ash fall, pumice lapilli fall and thin pyroclastic flow deposits, overlain by a thick and massive pyroclastic flow deposit with a thick basal lag breccia. The caldera (CII) is 7.5×6 km in size, with a minimum collapsed volume of 9 km³. The CII eruption included two distinct phases. During the first, eruption intensity was low to moderate and an unstable, essentially phreatomagmatic column developed. During the second phase, the onset of caldera collapse drastically increased the eruption intensity, resulting in column collapse. The caldera floor is believed to have subsided rapidly, producing a single, short-lived burst of high eruption intensity that resulted in the deposition of the uppermost massive pyroclastic flow.Editorial responsibility: T. Druitt     

Geomorphic response to late Quaternary tectonics in the axial portion of the Southern Apennines (Italy): A case study from the Calore River valley

The present study focuses on the morphotectonic evolution of the axial portion of the Southern Apennine chain between the lower Calore River valley and the northern Camposauro mountain front (Campania Region). A multidisciplinary approach was used, including geomorphological, field‐geology, stratigraphical, morphotectonic, structural, ⁴⁰Ar/³⁹Ar and tephrostratigraphical data. Results indicate that, from the Lower Pleistocene onwards, this sector of the chain was affected by extensional tectonics responsible for the onset of the sedimentation of Quaternary fluvial, alluvial fan and slope deposits. Fault systems are mainly composed of NW‐SE, NE–SW and W‐E trending strike‐slip and normal faults, associated to NW‐SE and NE–SW oriented extensions. Fault scarps, stratigraphical and structural data and morphotectonic indicators suggest that these faults affected the wide piedmont area of the northern Camposauro mountain front in the Lower Pleistocene–Upper Pleistocene time span. Faults affected both the oldest Quaternary slope deposits (Laiano Synthem, Lower Pleistocene) and the overlying alluvial fan system deposits constrained between the late Middle Pleistocene and the Holocene. The latter are geomorphologically and chrono‐stratigraphically grouped into four generations, I generation: late Middle Pleistocene–early Upper Pleistocene, with tephra layers ⁴⁰Ar/³⁹Ar dated to 158±6 and 113±7 ka; II generation: Upper Pleistocene, with tephra layers correlated with the Campanian Ignimbrite (39 ka) and with the slightly older Campi Flegrei activity (⁴⁰Ar/³⁹Ar age 48±7 ka); III generation: late Upper Pleistocene–Lower Holocene, with tephra layers correlated with the Neapolitan Yellow Tuff (~15 ka); IV generation: Holocene in age. The evolution of the first three generations was controlled by Middle Pleistocene extensional tectonics, while Holocene fans do not show evidence of tectonic activity. Nevertheless, considering the moderate to high magnitude historical seismicity of the study area, we cannot rule out that some of the recognized faults may still be active. Copyright © 2018 John Wiley & Sons, Ltd.