共查询到20条相似文献,搜索用时 31 毫秒
1.
研究建立渤海海域三维斜压场的湍流能量模型。对计算网格无法分辩的湍流运动,引入湍流能量求得垂向动量、质量及能量交换系统,从而形成封闭的湍流运动方程组。定量地计算了湍流能量、湍流速度及有风、无风状况下湍流能量的垂直分布等,探讨了湍流运动对潮波运动的影响。 相似文献
2.
A modified three-parameter model of turbulence for a thermally stratified atmospheric boundary layer (ABL) is presented. The model is based on tensor-invariant parametrizations for the pressure-strain and pressure-temperature correlations that are more complete than the parametrizations used in the Mellor-Yamada model of level 3.0. The turbulent momentum and heat fluxes are calculated with explicit algebraic models obtained with the aid of symbol algebra from the transport equations for momentum and heat fluxes in the approximation of weakly equilibrium turbulence. The turbulent transport of heat and momentum fluxes is assumed to be negligibly small in this approximation. The three-parameter E ? ε ? 2> model of thermally stratified turbulence is employed to obtain closed-form algebraic expressions for the fluxes. A computational test of a 24-h ABL evolution is implemented for an idealized two-dimensional region. Comparison of the computed results with the available observational data and other numerical models shows that the proposed model is able to reproduce both the most important structural features of the turbulence in an urban canopy layer near the urbanized ABL surface and the effect of urban roughness on a global structure of the fields of wind and temperature over a city. The results of the computational test for the new model indicate that the motion of air in the urban canopy layer is strongly influenced by mechanical factors (buildings) and thermal stratification. 相似文献
3.
《Coastal Engineering》2004,51(10):1021-1049
A numerical process-based model to forecast beach profile morphodynamics has been developed. In the present paper, an analysis of various modelling approaches and key parametrizations involved in the estimation of the wave-driven current and the suspended sediment concentration is carried out.Several resolution techniques for the 1DV horizontal (i.e., in the x-direction perpendicular to coastline) momentum equation governing the Mean Horizontal Velocity (MHV) are analysed. In the first kind of techniques, the mean horizontal velocity is computed from the momentum equation, whereas the Mean Water Level (MWL) is computed using a parametrization of the depth-averaged momentum equation. Two boundary or integral conditions are thus needed. In the second kind, both mean horizontal velocity and mean water level gradient in the x-direction are the unknowns of the momentum equation, thus, three boundary or integral conditions are needed. Various additional conditions are discussed. We show that using a technique of the first kind is equivalent to imposing the difference between the surface and the bottom shear stresses in the 1D vertical equation. Both techniques lead to results that are in good agreement with the Delta Flume experimental data, provided the Stokes drift flow discharge is imposed as an additional condition. The influence of the breaking roller model and of the turbulent viscosity parametrization are also analysed.Suspended sediment transport by the mean current and wave-induced bedload transport are taken into account in the sediment flux. Three turbulent diffusivity parametrizations are compared for suspended sediment concentration estimations. A linear profile for the turbulent diffusivity taking into account the wave bottom shear stress and the surface wave breaking turbulence production is shown to give the best results. Using experimental data, we put forward the poor estimation of the bottom sediment concentration given by the three implemented parametrizations. We thus propose a new parametrization relying on a Shields parameter based on the breaking roller induced surface shear stress. Using this new parametrization, the bottom profile used in the tests keeps its two bars which disappear otherwise. However, the morphodynamical model still overestimates the bars offshore motion, a bias already observed in other models. 相似文献
4.
海浪破碎对海洋上混合层中湍能量收支的影响 总被引:2,自引:1,他引:2
海浪破碎产生一向下输入的湍动能通量,在近海表处形成一湍流生成明显增加的次层,加强了海洋上混合层中的湍流垂向混合。为了研究海浪破碎对混合层中湍能量收支的影响,文中分析了海浪破碎对海洋上混合层中湍流生成的影响机制,采用垂向一维湍封闭混合模式,通过改变湍动能方程的上边界条件,引入了海浪破碎产生的湍动能通量,并分别对不同风速下海浪破碎的影响进行了数值研究,分析了混合层中湍能量收支的变化。当考虑海浪破碎影响时,近海表次层中的垂直扩散项和耗散项都有显著的增加,该次层中被耗散的湍动能占整个混合层中耗散的总的湍能量的92.0%,比无海浪破碎影响的结果增加了近1倍;由于平均流场切变减小,混合层中的湍流剪切生成减小了3.5%,形成一种存在于湍动能的耗散和垂直扩散之间的局部平衡关系。在该次层以下,局部平衡关系与壁层定律的结论一致,即湍动能的剪切生成与耗散相平衡。研究结果表明,海浪破碎在海表产生的湍动能通量影响了海洋上混合层中的各项湍能量收支间的局部平衡关系。 相似文献
5.
海雾是近海面层大气的水汽凝结现象.这种现象的发生是大气与海洋及大气内部热量和水汽交换的结果.Rodhe,B.[1]曾用湍流扩散方程讨论过湍流对雾形成的作用.Fisher,E.F.和Caplan[1]首次对雾和层云的形成进行数值试验. 相似文献
6.
P. C. Sinha Y. R. Rao S. K. Dube C. R. Murthy A. K. Chatterjee 《Estuarine, Coastal and Shelf Science》1999,48(6):649
This paper has two purposes. The first is to study the circulation and salinity in Hooghly Estuary, along the east coast of India and the second is to compare the performance of two turbulence closure schemes by modelling it. A breadth averaged numerical model using a sigma co-ordinate system in the vertical is briefly described. Vertical diffusion of momentum and salt are parameterized by a simple first-order turbulent closure or by a one equation model for turbulent kinetic energy (TKE) which uses a specified mixing length. The results are compared with the available neap and spring tide observations along the estuary for both low and high discharge periods.The computed elevations and currents are in reasonable agreement with the observations showing no major differences in vertical current profiles by both the turbulent schemes. However, there is a slight under-prediction of bottom currents. The salinity profiles predicted by TKE model show better matching with observations. Statistical tests are also conducted to study the comparative performance of the turbulent closure schemes. The maintenance of two layer structure in residual currents and salt variability are also studied by using the model. 相似文献
7.
Numerical study on the characteristics of flow field and wave propagation near submerged breakwater on slope 总被引:2,自引:1,他引:1
In this study,characteristics of flow field and wave propagation near submerged breakwater on a sloping bed are investigated with numerical model. The governing equations of the vertical twodimensional model are Reynolds Averaged Navier Stokes equations. The Reynolds stress terms are closed by a nonlinear k ε turbulence transportation model. The free surface is traced through the PILC-VOF method. The proposed numerical model is verified with experimental results. The numerical result shows that the wave profile may become more asymmetrical when wave propa-gates over breakwater. When wave crest propagates over breakwater,the anticlockwise vortex may generate. On the contrary,when wave hollow propagates over breakwater,the clockwise vortex may generate. Meanwhile,the influenced zone of vortex created by wave crest is larger than that created by wave hollow. All the maximum values of the turbulent kinetic energy,turbulent dissi-pation and eddy viscosity occur on the top of breakwater. Both the turbulent dissipation and eddy viscosity increase as the turbulent kinetic energy increases. Wave energy may rapidly decrease near the breakwater because turbulent dissipation increases and energy in lower harmonics is transferred into higher harmonics. 相似文献
8.
O. F. Vasil’ev O. F. Voropaeva A. F. Kurbatskii 《Izvestiya Atmospheric and Oceanic Physics》2011,47(3):265-280
Specific features of the turbulent transfer of the momentum and heat in stably stratified geophysical flows, as well as possibilities for including them into RANS turbulence models, are analyzed. The momentum (but not heat) transfer by internal gravity waves under conditions of strong stability is, for example, one such feature. Laboratory data and measurements in the atmosphere fix a clear dropping trend of the inverse turbulent Prandtl number with an increasing gradient Richardson number, which must be reproduced by turbulence models. Ignoring this feature can cause a false diffusion of heat under conditions of strong stability and lead, in particular, to noticeable errors in calculations of the temperature in the atmospheric boundary layer. Therefore, models of turbulent transfer must include the effect of the action of buoyancy and internal gravity waves on turbulent flows of the momentum. Such a strategy of modeling the stratified turbulence is presented in the review by a concrete RANS model and original results obtained during the modeling of stratified flows in the environment. Semiempirical turbulence models used for calculations of complex turbulent flows in deep stratified bodies of water are also analyzed. This part of the review is based on the data of investigations within the framework of the large international scientific Comparative Analysis and Rationalization of Second-Moment Turbulence Models (CARTUM) project and other publications of leading specialists. The most economical and effective approach associated with modified two-parameter turbulence models is a real alternative to classical variants of these models. A class of test problems and laboratory and full-scale experiments used by the participants of the CARTUM project for the approbation of numerical models are considered. 相似文献
9.
10.
E. V. Ezhova S. S. Zilitinkevitch G. V. Rybushkina I. A. Soustova Yu. I. Troitskaya 《Izvestiya Atmospheric and Oceanic Physics》2016,52(3):294-300
The self-similar turbulent density jump evolution has been studied in the scope of a turbulence closure modernized theory which takes into account the anisotropy and mutual transformation of the turbulent fluctuation kinetic and potential energy for a stably stratified fluid. The numerical calculation, performed using the equations for the average density and kinetic and potential energies of turbulent fluctuations, indicates that the vertical profiles of the buoyancy frequency, turbulence scale, and kinetic and potential energies drastically change when the turbulence anisotropy is strong. The vertical profiles of the corresponding energy and spatial discontinuity parameters, calculated at a weaker anisotropy, indicate that similar drastic changes are absent and a qualitative agreement exists with the known analytical solution, which describes the density jump evolution in a freshwater basin and was obtained previously [5, 8] in the scope of a turbulence local-similarity hypothesis applied in combination with the budget equation for the turbulent fluctuation kinetic energy. 相似文献
11.
A computational fluid dynamics (CFD) model was developed to simulate the turbulent flow and species transport of deep-sea high temperature hydrothermal plumes. The model solves numerically the density weighted unsteady Reynolds-averaged Navier–Stokes equations and energy equation and the species transport equation. Turbulent entrainment and mixing is modeled by a k–ε turbulence closure model. The CFD model explicitly considers realistic vent chimney geometry, vent exit fluid temperature and velocity, and background stratification. The model uses field measurements as model inputs and has been validated by field data. These measurements and data, including vent temperature and plume physical structure, were made in the ABE hydrothermal field of the Eastern Lau Spreading Center. A parametric sensitivity study based on this CFD model was conducted to determine the relative importance of vent exit velocity, background stratification, and chimney height on the mixing of vent fluid and seawater. The CFD model was also used to derive several important scalings that are relevant to understanding plume impact on the ocean. These scalings include maximum plume rise height, neutrally buoyant plume height, maximum plume induced turbulent diffusivity, and total plume vertically transported water mass flux. These scaling relationships can be used for constructing simplified 1-dimensional models of geochemistry and microbial activity in hydrothermal plumes. Simulation results show that the classical entrainment assumptions, typically invoked to describe hydrothermal plume transport, only apply up to the vertical level of ~0.6 times the maximum plume rise height. Below that level, the entrainment coefficient remains relatively constant (~0.15). Above that level, the plume flow consists of a pronounced lateral spreading flow, two branches of inward flow immediately above and below the lateral spreading, and recirculation flanking the plume cap region. Both turbulent kinetic energy and turbulence dissipation rate reach their maximum near the vent; however, turbulent viscosity attains its maximum near the plume top, indicating strong turbulent mixing in that region. The parametric study shows that near vent physical conditions, including chimney height and fluid exit velocity, influence plume mixing from the vent orifice to a distance of ~10 times the vent orifice diameter. Thus, physical parameters place a strong kinetic constraint on the chemical reactions occurring in the initial particle-forming zone of hydrothermal plumes. 相似文献
12.
《Coastal Engineering》2001,42(1):53-86
A numerical model is used to simulate wave breaking, the large scale water motions and turbulence induced by the breaking process. The model consists of a free surface model using the surface markers method combined with a three-dimensional model that solves the flow equations. The turbulence is described by large eddy simulation where the larger turbulent features are simulated by solving the flow equations, and the small scale turbulence that is not resolved by the flow model is represented by a sub-grid model. A simple Smagorinsky sub-grid model has been used for the present simulations. The incoming waves are specified by a flux boundary condition. The waves are approaching in the shore-normal direction and are breaking on a plane, constant slope beach. The first few wave periods are simulated by a two-dimensional model in the vertical plane normal to the beach line. The model describes the steepening and the overturning of the wave. At a given instant, the model domain is extended to three dimensions, and the two-dimensional flow field develops spontaneously three-dimensional flow features with turbulent eddies. After a few wave periods, stationary (periodic) conditions are achieved. The surface is still specified to be uniform in the transverse (alongshore) direction, and it is only the flow field that is three-dimensional.The turbulent structures are investigated under different breaker types, spilling, weak plungers and strong plungers. The model is able to reproduce complicated flow phenomena such as obliquely descending eddies. The turbulent kinetic energy is found by averaging over the transverse direction. In spilling breakers, the turbulence is generated in a series of eddies in the shear layer under the surface roller. After the passage of the roller the turbulence spreads downwards. In the strong plunging breaker, the turbulence originates to a large degree from the topologically generated vorticity. The turbulence generated at the plunge point is almost immediately distributed over the entire water depth by large organised vortices. Away from the bed, the length scale of the turbulence (the characteristic size of the eddies resolved by the model) is similar in the horizontal and the vertical direction. It is found to be of the order one half of the water depth. 相似文献
13.
《Ocean Modelling》2011,39(3-4):267-279
Near-surface enhancement of turbulent mixing and vertical mixing coefficient for temperature owing to the effect of surface wave breaking is investigated using a two-dimensional (2-D) ocean circulation model with a tidal boundary condition in an idealized shelf sea. On the basis of the 2-D simulation, the effect of surface wave breaking on surface boundary layer deepening in the Yellow Sea in summer is studied utilizing a 3-D ocean circulation model. A well-mixed temperature surface layer in the Yellow Sea can be successfully reconstructed when the effect of surface wave breaking is considered. The diagnostic analysis of the turbulent kinetic energy equation shows that turbulent mixing is enhanced greatly in the Yellow Sea in summer by surface wave breaking. In addition, the diagnostic analysis of momentum budget and temperature budget also show that surface wave breaking has an evident contribution to the turbulent mixing in the surface boundary layer. We therefore conclude that surface wave breaking is an important factor in determining the depth of the surface boundary layer of temperature in the Yellow Sea in summer. 相似文献
14.
AnADItechniqueforsolvingthree-dimensionalcoastalcirculationYangLianwu1,*andJoseOzer2(ReceivedNovember27,1996;acceptedDecember... 相似文献
15.
A. F. Kurbatskiy 《Izvestiya Atmospheric and Oceanic Physics》2008,44(2):160-166
The nonlocality of the mechanism of turbulent heat transfer in the atmospheric boundary layer over a rough surface manifests itself in the form of bounded areas of countergradient heat transfer, which are diagnosed from analysis of balance items in the transport equation for the variance of temperature fluctuations and from calculation of the coefficients of turbulent momentum and heat transfer invoking the model of “gradient diffusion.” It is shown that countergradient heat transfer in local regions is caused by turbulent diffusion or by the term of the divergence of triple correlation in the balance equation for the temperature variance. 相似文献
16.
A. V. Glazunov 《Izvestiya Atmospheric and Oceanic Physics》2006,42(3):282-299
The neutrally stratified boundary layer over a smooth rough surface is consider. The turbulent flow is simulated using a finite-difference eddy-resolving model of the atmospheric boundary layer (ABL). The model includes different turbulence closure schemes and numerical approximations for advection components of the momentum balance equation. We investigate the quality of reproduction of spectral characteristics of the turbulent flow and the model’s capabilities to reproduce the observed profile of mean wind velocity near the rough surface. It is shown that the best result is obtained by coupling a numerical scheme of higher order of accuracy with a mixed closure scheme based on an adaptive estimation of the mixing length for subgrid-scale fluctuations. Here, we are able to reproduce the asymptotics of the fluctuation spectrum of the longitudinal component of wind velocity near the surface and within the boundary layer as well as the logarithmic profile of mean velocity near the surface. 相似文献
17.
This paper describes the formulation and validation of a nearshore wave model for tropical coastal environment. The governing Boussinesq-type equations include the conservative form of the nonlinear shallow-water equations for shock capturing. A Riemann solver supplies the inter-cell flux and bathymetry source term, while a Godunov-type scheme integrates the evolution variables in time. The model handles wave breaking through momentum conservation with energy dissipation based on an eddy viscosity concept. The computed results show very good agreement with laboratory data for wave propagation over a submerged bar, wave breaking and runup on plane beaches as well as wave transformation over fringing reefs. The model accurately describes transition between supercritical and subcritical flows as well as development of dispersive waves in the processes. 相似文献
18.
Effect of air-sea temperature difference on the momentum exchange between air and sea for fetch-limited casesChengZhanandWuSh... 相似文献
19.
20.
A nearshore wave breaking model 总被引:4,自引:0,他引:4
AnearshorewavebreakingmodelLiShaowu,WangShangyi,TomoyaShibayama(ReceiuedOctober8,1996;acceptedFebruary26,1997)Abstract-Awaveb... 相似文献