Deeply buried ancient volcanoes control hydrocarbon migration in the South China Sea

Seismic reflection data image now-buried and inactive volcanoes, both onshore and along the submarine portions of continental margins. However, the impact that these volcanoes have on later, post-eruption fluid flow events (e.g., hydrocarbon migration and accumulation) is poorly understood. Determining how buried volcanoes and their underlying plumbing systems influence subsurface fluid or gas flow, or form traps for hydrocarbon accumulations, is critical to de-risk hydrocarbon exploration and production. Here, we focus on evaluating how buried volcanoes affect the bulk permeability of hydrocarbon seals, and channel and focus hydrocarbons. We use high-resolution 3D seismic reflection and borehole data from the northern South China Sea to show how ca. <10 km wide, ca. <590 m high Miocene volcanoes, buried several kilometres (ca. 1.9 km) below the seabed and fed by a sub-volcanic plumbing system that exploited rift-related faults: (i) acted as long-lived migration pathways, and perhaps reservoirs, for hydrocarbons generated from even more deeply buried (ca. 8–10 km) source rocks; and (ii) instigated differential compaction and doming of the overburden during subsequent burial, producing extensional faults that breached regional seal rocks. Considering that volcanism and related deformation are both common on many magma-rich passive margins, the interplay between the magmatic products and hydrocarbon migration documented here may be more common than currently thought. Our results demonstrate that now-buried and inactive volcanoes can locally degrade hydrocarbon reservoir seals and control the migration of hydrocarbon-rich fluids and gas. These fluids and gases can migrate into and be stored in shallower reservoirs, where they may then represent geohazards to drilling and impact slope stability.     

Detection of fluid migration pathways in seismic data: implications for fault seal analysis

A new and efficient method for fault seal analysis using seismic data is presented. It uses multiple seismic attributes and neural networks to enhance fluid migration pathways, including subtle features that are not detectable using single attributes only. The method may be used as a first estimate of fault seal or to calibrate results from other techniques. The results provide information about which faults and fault segments are sealing or leaking. Fluid flow along individual faults appears to be focused along zones of weakness, and fault seal research should thus be focused on finding such weak locations within fault zones, a task that is best done using three‐dimensional (3D) seismic data. Under certain conditions, it is suggested that fluids migrate along fault planes by a diapiric fluid flow mechanism. The results assist in calibrating the bulk hydraulic properties of faults and rock formations and can be used in basin modelling.     

Geological structure and kinematics of normal faults in the Otway Basin,Australia, based on quantitative analysis of 3‐D seismic reflection data

The Otway Basin in the south of Victoria, Australia underwent three phases of deformation during breakup of the southern Australian margin. We assess the geometry and kinematics of faulting in the basin by analysing a 3‐D reflection seismic volume. Eight stratigraphic horizons and 24 SW‐dipping normal faults as well as subordinate antithetic faults were interpreted. This resulted in a high‐resolution geological 3‐D model (ca. 8 km × 7 km × 4 km depth) that we present as a supplementary 3‐D PDF (Data S1). We identified hard‐ and soft‐linking fault connections over the entire area, such as antithetic faults and relay ramps, respectively. Most major faults were continuously active from Early to Late Cretaceous, with two faults in the northern part of the study area active until at least the Oligocene. Allan maps of faults show tectonic activity continuously waned over this time period. Isopach maps of stratigraphic volumes quantify the amount of syn‐sedimentary movement that is characteristic of passive margins, such as the Otway Basin. We show that the faults possess strong corrugations (with amplitudes above the seismic resolution), which we illustrated by novel techniques, such as cylindricity and curvature. We argue that the corrugations are produced by sutures between sub‐vertical fault segments and this morphology was maintained during fault growth. Thus, they can be used to indicate the kinematics vector of the fault movement. This evidences, together with left‐stepping relay ramps, that 40% of the faults had a small component (up to 25°) of dextral oblique slip as well as normal (dip‐slip) movement.     

Paleo‐fluid expulsion and contouritic drift formation on the Chatham Rise,New Zealand

The Chatham Rise is located offshore of New Zealand's South Island. Vast areas of the Chatham Rise are covered in circular to elliptical seafloor depressions that appear to be forming through a bathymetrically controlled mechanism, as seafloor depressions 2–5 km in diameter are found in water depths of 800–1100 m. High‐resolution P‐Cable 3D seismic data were acquired in 2013 across one of these depressions. The seafloor depression is interpreted as a mounded contourite. Our data reveal several smaller buried depressions (<20–650 m diameter) beneath the mounded contourite that we interpret as paleo‐pockmarks. These pockmarks are underlain by a complex polygonal fault system that deforms the strata and an unusual conical feature results. We interpret the conical feature as a sediment remobilization structure based on the presence of stratified reflections within the feature, RMS amplitude values and lack of velocity anomaly that would indicate a nonsedimentary origin. The sediment remobilization structure, polygonal faults and paleo‐depressions are the indicators of the past subsurface fluid flow. We hypothesize that the pockmarks provided the necessary topographic roughness for the formation of the mounded contourites thus linking fluid expulsion and the deposition of contouritic drifts.     

Tectonic compaction shortening in toe region of isolated listric normal fault,North Taranaki Basin,New Zealand

Industry 2D and 3D seismic data across the North Taranaki Basin displays two listric normal faults that formed during Pliocene shelf edge clinoform progradation. The faults die out in the down‐transport direction with no evidence for contractional structures, except for two small thrust faults in one narrow zone. When active, the detachments lay at depths of about 1000 m below the seafloor. The overlying section had high initial porosities (30–60%). It is estimated that loss of about 17–20% pore volume by lateral compaction, and fluid expulsion over a distance of about 4–6 km in the transport direction occurred in place of folding and thrusting. Seismic and well evidence for abnormally highly compacted shales suggests there is about 6% less porosity than expected for in the prekinematic section, which possibly represents a residual of the porosity anomaly caused by lateral compaction. The observations indicate significant shortening (~20%) by lateral compaction and probably some layer parallel thickening are important deformation mechanisms in near‐surface deepwater sediments that needs to be incorporated into shortening estimates and ‘balanced’ cross‐sections. A key factor in listric fault initiation near the base of slope is inferred to be transient, increased pore fluid pressure due to lateral expulsion of fluids from beneath the prograding Giant Foresets Formation.     

Three-dimensional-seismic coherency signature of Niger Delta growth faults: integrating sedimentology and tectonics

This case study of growth faults and associated deltaic sedimentation in the shallow‐offshore Niger Delta uses an integrated analysis of three‐dimensional (3D)‐seismic coherence facies and wireline data that supports an evaluation of the sedimentary response to delta tectonics. The study area comprises four fault blocks bounded by a set of kilometre‐scale, basinward‐dipping, synsedimentary normal faults. Correlation of highly variable growth stratigraphy across faults was achieved by a systematic visualization and interpretation of series of coherence horizon‐slices: the detection and matching of erosive and depositional patterns (e.g. channels) across faults allowed the establishment of sedimentology‐controlled links between diverse footwall and hanging‐wall growth successions. At the same time, this interpretation approach helped to visualize seismic‐sedimentological and seismic‐geomorphological features survey‐wide at all depth levels. The integration of this extensive 3D database with lithology information from wireline logs provides a powerful tool for subsurface sedimentology interpretation. Synoptic analysis of the 3D‐seismic sedimentology interpretation with stratigraphy based fault‐kinematic analysis using throw vs. depth plots (Th–Z plots) enabled a discussion of the relation between delta tectonics and sedimentary‐system development, and the evaluation of the Th–Z method for subsurface‐lithology prediction. The interpretation results document that both motion analysis of synsedimentary deltaic faults and Th–Z‐based lithology prediction are only feasible when supported by detailed 3D information on palaeoenvironment and palaeotopography at and around studied fault systems. We therefore recommend the use of fast‐track fault‐kinematic and subsurface‐lithology predictions based on Th–Z plots only when supported by comprehensive 3D seismic‐sedimentological interpretations.     

The linkage between fault throw and footwall scarp erosion patterns: an example from the Bremstein Fault Complex,offshore Mid‐Norway

Studies of normal fault systems in modern extensional regimes (e.g. Basin and Range), and in exhumed, ancient rift basins (e.g. Gulf of Suez Rift) have shown a link between the evolution of fault‐related footwall topography and associated erosional drainage systems. In this study, we use 3D seismic reflection data to image the footwall crest of a gravity‐driven fault system developed during late Middle Jurassic to Early Cretaceous rifting on the Halten Terrace, offshore Mid‐Norway. This 22‐km‐long fault system lacks significant footwall uplift, with hangingwall subsidence accommodating throw accumulation on the fault system. Significant erosion has occurred along the length of the footwall crest and is defined by 96 catchments characterized by erosional channels. These erosional channels consist of small, linear systems up to 750 m long located along the front of the fault footwall. Larger, dendritic channel systems extend further back (up to 3 km normal to fault strike) into the footwall. These channels are up to 7 km long, up to 50 m deep and up to 1 km wide. Fault throw varies along strike, with greatest throw in the centre of the fault decreasing towards the fault tips; localized throw minima are interpreted to represent segment linkage points, which were breached as the fault grew. Comparison of the catchment location to the throw distribution shows that the largest catchments are in the centre of the fault and decrease in size to the fault tips. There is no link between the location of the breached segment linkage points and the location and size of the footwall catchments, suggesting that the first‐order control on footwall erosion patterns is the overall fault‐throw distribution.     

The architecture of submarine monogenetic volcanoes – insights from 3D seismic data

Many prospective sedimentary basins contain a variety of extrusive volcanic products that are ultimately sourced from volcanoes. However, seismic reflection‐based studies of magmatic rift basins have tended to focus on the underlying magma plumbing system, meaning that the seismic characteristics of volcanoes are not well understood. Additionally, volcanoes have similar morphologies to hydrothermal vents, which are also linked to underlying magmatic intrusions. In this study, we use high resolution 3D seismic and well data from the Bass Basin, offshore southern Australia, to document 34 cone‐ and crater‐type vents of Miocene age. The vents overlie magmatic intrusions and have seismic properties indicative of a volcanic origin: their moderate–high amplitude upper reflections and zones of “wash‐out” and velocity pull‐up beneath. The internal reflections of the vents are similar to those found in lava deltas, suggesting they are composed of volcaniclastic material. This interpretation is corroborated by data from exploration wells which penetrated the flanks of several vents. We infer that the vents we describe are composed of hyaloclastite and pyroclasts produced during submarine volcanic eruptions. The morphology of the vents is typical of monogenetic volcanoes, consistent with the onshore record of volcanism on the southern Australian margin. Based on temporal, spatial and volumetric relationships, we propose that submarine volcanoes can evolve from maars to tuff cones as a result of varying magma‐water interaction efficiency. The morphologies of the volcanoes and their links to the underlying feeder systems are superficially similar to hydrothermal vents. This highlights the need for careful seismic interpretation and characterization of vent structures linked to magmatic intrusions within sedimentary basins.     

Structure of the footwall of a listric fault system revealed by 3D seismic data from the Niger Delta

We use three‐dimensional (3D) seismic reflection data to analyse the architecture of the footwall of a listric fault, in a gravitationally driven extensional system, in the north‐western Niger Delta. In contrast to conventional listric normal fault models with a single master listric fault plane the level of detachment switches from a deeper to shallower level. The footwall evolves through the generation of new master detachment faults and detachments, which transfers hanging wall rocks into the footwall. New detachments form by branching off pre‐existing detachment levels, cutting‐up through stratigraphy to the next mechanical weakness, separating discrete sections of extended strata. As a consequence a deeper, older array of seaward‐dipping, tilted extensional fault blocks is now located in the footwall beneath the master listric detachment fault. The structural complexity located below the master detachment fault highlights extensional episodes on separate detachment faults that are not captured in conventional listric models. We speculate that changes in the level of the detachment are caused by mechanical weaknesses controlled by lithology, pore pressure and episodes of sediment loading related to deltaic progradation.     

Structural style and evolution of a salt‐influenced rift basin margin; the impact of variations in salt composition and the role of polyphase extension

Because salt can decouple sub‐ and supra‐salt deformation, the structural style and evolution of salt‐influenced rifts differs from those developed in megoscopically homogenous and brittle crust. Our understanding of the structural style and evolution of salt‐influenced rifts comes from scaled physical models, or subsurface‐based studies that have utilised moderate‐quality 2D seismic reflection data. Relatively few studies have used high‐quality 3D seismic reflection data, constrained by borehole data, to explicitly focus on the role that along‐strike displacement variations on sub‐salt fault systems, or changes in salt composition and thickness, play in controlling the four‐dimensional evolution of supra‐salt structural styles. In this study, we use 3D seismic reflection and borehole data from the Sele High Fault System (SHFS), offshore Norway to determine how rift‐related relief controlled the thickness and lithology of an Upper Permian salt‐bearing layer (Zechstein Supergroup), and how the associated variations in the mechanical properties of this unit influenced the degree of coupling between sub‐ and supra‐salt deformation during subsequent extension. Seismic and borehole data indicate that the Zechstein Supergroup is thin, carbonate‐dominated and immobile at the footwall apex, but thick, halite‐dominated and relatively mobile in high accommodation areas, such as near the lateral fault tips and in the immediate hangingwall of the fault system. We infer that these variations reflect bathymetric changes related to either syn‐depositional (i.e. Late Permian) growth of the SHFS or underfilled, fault scarp‐related relief inherited from a preceding (i.e. Early Permian) rift phase. After a period of tectonic quiescence in the Early Triassic, regional extension during the Late Triassic triggered halokinesis and growth of a fault‐parallel salt wall, which was followed by mild extension in the Jurassic and forced folding of Triassic overburden above the fault systems upper tip. During the Early Cretaceous, basement‐involved extension resulted in noncoaxial tilting of the footwall, and the development of an supra‐salt normal fault array, which was restricted to footwall areas underlain by relatively thick mobile salt; in contrast, at the footwall apex, no deformation occurred because salt was thin and immobile. The results of our study demonstrate close coupling between tectonics, salt deposition and the style of overburden deformation for >180 Myr of the rift history. Furthermore, we show that rift basin tectono‐stratigraphic models based on relatively megascopically homogeneous and brittle crust do not appropriately describe the range of structural styles that occur in salt‐influenced rifts.     

Normal fault array evolution above a reactivated rift fabric; a subsurface example from the northern Horda Platform,Norwegian North Sea

The impact of a pre‐existing rift fabric on normal fault array evolution during a subsequent phase of lithospheric extension is investigated using 2‐D and 3‐D seismic reflection, and borehole data from the northern Horda Platform, Norwegian North Sea. Two fault populations are developed: (i) a population comprising relatively tall (>2 km), N‐S‐striking faults, which have >1.5 km of throw. These faults are up to 60 km long, penetrate down into crystalline basement and bound the eastern margins of 6–15 km wide half‐graben, which contain >3 km of pre‐Jurassic, likely Permo–Triassic, but possibly Devonian syn‐rift strata; and (ii) a population comprising vertically restricted (<1 km), NW‐SE‐striking faults, which are more closely spaced (0.5–5 km), have lower displacements (30–100 m) and not as long (2–10 km) as those in the N–S‐striking population. The NW‐SE‐striking population typically occurs between the N‐S‐striking population, and may terminate against or cross‐cut the larger structures. NW–SE‐striking faults do not bound pre‐Jurassic half‐graben and are largely restricted to the Jurassic‐to‐Cretaceous succession. Seismic‐stratigraphic observations, and the stratigraphic position of the fault tips in both fault populations, allow us to reconstruct the Late Jurassic‐to‐Early Cretaceous growth history of the northern Horda Platform fault array. We suggest the large, N‐S‐striking population was active during the Permo–Triassic and possibly earlier (Devonian?), before becoming inactive and buried during the Early and Middle Jurassic. After a period of relative tectonic quiescence, the N‐S‐striking, pre‐Jurassic fault population propagated through the Early‐Middle Jurassic cover and individual fault systems rapidly (within <10 Ma) established their maximum length in response to Late Jurassic extension. These fault systems became the dominant structures in the newly formed fault array and defined the locations of the main, Late Jurassic‐to‐Early Cretaceous, syn‐rift depocentres. Late Jurassic extension was also accommodated by broadly synchronous growth of the NW‐SE‐striking fault population; the eventual death of this population occurred in response to the localization of strain onto the N–S‐striking fault population. Our study demonstrates that the inheritance of a pre‐existing rift fabric can influence the geometry and growth of individual fault systems and the fault array as a whole. On the basis of observations made in this study, we present a conceptual model that highlights the influence of a pre‐existing rift fabric on fault array evolution in polyphase rifts.     

Depositional systems in multiphase rifts: seismic case study from the Lofoten margin,Norway

The evolution of depositional systems in multiphase rifts is influenced by the selective reactivation of faults between subsequent rift phases. The Middle Jurassic to Palaeocene tectonic history of the Lofoten margin, a segment of the North Atlantic rift system, is characterised by three distinct rift phases separated by long (>20 Myr) inter‐rift periods. The initial rift phase comprised a distinct fault initiation and linkage stage, whereas the later rift phases were characterised by selective reactivation of previously linked through‐going faults which resulted in immediate rift climax. Using 2‐D and 3‐D seismic reflection data in conjunction with shallow core data we present a 100 Myr record of shallow to deep marine depositional environments that includes deltaic clinoform packages, slope aprons and turbidite fans. The rapid re‐establishment of major faults during the later rift phases impacts on drainage systems and sediment supply. Firstly, the immediate localisation of strain and accumulation of displacement on few faults results in pronounced footwall uplift and possible fault block rotation along those faults, which makes it more likely for any antecedent fault‐transverse depositional systems to become reversed. Secondly, any antecedent axially‐sourced depositional systems that are inherited from the foregoing rift phase(s) are likely to be sustained after reactivation because such axial systems have already been directed around fault tips. Hence, the immediate localisation of strain through selective reactivation in the later rift phases restricts fault‐transverse sediment supply more than axial sediment supply, which is likely to be a key aspect of the tectono‐sedimentary evolution of multiphase rifts.     

Spatial distribution of micrometre‐scale porosity and permeability across the damage zone of a reverse‐reactivated normal fault in a tight sandstone: Insights from the Otway Basin,SE Australia

Knowledge of the permeability structure of fault‐bearing reservoir rocks is fundamental for developing robust hydrocarbon exploration and fluid monitoring strategies. Studies often describe the permeability structure of low porosity host rocks that have experienced simple tectonic histories, while investigations of the influence of faults with multiple‐slip histories on the permeability structure of porous clastic rocks are limited. We present results from an integrated petrophysical, microstructural, and mineralogical investigation of the Eumeralla Formation (a tight volcanogenic sandstone) within the hanging wall of the Castle Cove Fault which strikes 30 km NE–SW in the Otway Basin, southeast Australia. This late Jurassic to Cenozoic‐age basin has experienced multiple phases of extension and compression. Core plugs and thin sections oriented relative to the fault plane were sampled from the hanging wall at distances of up to 225 m from the Castle Cove Fault plane. As the fault plane is approached, connected porosities increase by ca. 10% (17% at 225 m to 24% at 0.5 m) and permeabilities increase by two orders of magnitude (from 0.04 mD at 225 m to 1.26 mD at 0.5 m). Backscattered Scanning Electron Microscope analysis shows that microstructural changes due to faulting have enhanced the micrometre‐scale permeability structure of the Eumeralla Formation. These microstructural changes have been attributed to the formation of microfractures and destruction of original pore‐lining chlorite morphology as a result of fault deformation. Complex deformation, that is, formation of macrofractures, variably oriented microfractures, and a hanging wall anticline, associated with normal faulting and subsequent reverse faulting, has significantly influenced the off‐fault fluid flow properties of the protolith. However, despite enhancement of the host rock permeability structure, the Eumeralla Formation at Castle Cove is still considered a tight sandstone. Our study shows that high‐resolution integrated analyses of the host rock are critical for describing the micrometre‐scale permeability structure of reservoir rocks with high porosities, low permeabilities, and abundant clays that have experienced complex deformation.     

How do pre‐existing normal faults influence rift geometry? A comparison of adjacent basins with contrasting underlying structure on the Lofoten Margin,Norway

Recent studies of natural, multiphase rifts suggest that the presence of pre‐existing faults may strongly influence fault growth during later rift phases. These findings compare well with predictions from recent scaled analogue experiments that simulate multiphase, non‐coaxial extension. However, in natural rifts we only get to see the final result of multiphase rifting. We therefore do not get the chance to compare the effects of the same rift phase with and without pre‐existing structural heterogeneity, as we may in the controlled environment of a laboratory experiment. Here, we present a case study from the Lofoten Margin that provides a unique opportunity to compare normal fault growth with and without pre‐existing structural heterogeneity. Using seismic reflection and wellbore data, we demonstrate that the Ribban Basin formed during Late Jurassic to Early Cretaceous rifting. We also show that the rift fault network of the Ribban Basin lacks a pre‐existing (Permian‐Triassic) structural grain that underlies the neighbouring North Træna Basin that also formed during the Late Jurassic to Early Cretaceous. Being able to compare adjacent basins with similar histories but contrasting underlying structure allows us to study how pre‐existing normal faults influence rift geometry. We demonstrate that in Lofoten, the absence of pre‐existing normal faults produced collinear fault zones. Conversely, where pre‐existing faults are present, normal fault zones develop strong “zigzag” plan‐view geometries.     

Structural evolution of a gravitationally detached normal fault array: analysis of 3D seismic data from the Ceduna Sub‐Basin,Great Australian Bight

The growth, interaction and controls on normal fault systems developed within stacked delta systems at extensional delta‐top settings have not been extensively examined. We aim to analyse the kinematic, spatial and temporal growth of a Cretaceous aged, thin‐skinned, listric fault system in order to further the understanding of how gravity‐driven fault segments and fault systems develop and interact at an extensional delta‐top setting. Furthermore, we aim to explore the influence of a pre‐existing structural framework on the development of gravity‐driven normal faults through the examination of two overlapping, spatially and temporally distinct delta systems. To do this, we use three‐dimensional (3D) seismic reflection data from the central Ceduna Sub‐basin, offshore southern Australia. The seismic reflection data images a Cenomanian‐Santonian fault system, and a post‐Santonian fault system, which are dip‐linked through an intervening Turonian‐early Campanian section. Both of these fault systems contain four hard‐linked strike assemblages oriented NW–SE (127–307), each composed of 13 major fault segments. The Cenomanian‐Santonian fault system detaches at the base of a shale interval of late Albian age, and is characterised by kilometre‐scale growth faults in the Cenomanian‐Sanontian interval. The post‐Santonian fault system nucleated in vertical isolation from the Cenomanian‐Santonian fault system. This is evident through displacement minima observed at Turonian‐early Campanian levels, which is indicative of vertical segmentation and eventual hard dip‐linkage. Our analysis constrains fault growth into four major evolutionary stages: (1) early Cenomanian nucleation and growth of fault segments, resulting from gravitational instability, and with faults detaching on the lower Albian interval; (2) Santonian cessation of growth for the majority of faults; (3) erosional truncation of fault upper tips coincident with the continental breakup of Australia and Antarctica (ca. 83 Ma); (4) Campanian‐Maastrichtian reactivation of the underlying Cenomanian‐Santonian fault system, inducing the nucleation, growth and consequential dip‐linkage of the post‐Santonian fault system with the underlying fault system. Our results highlight the along‐strike linkage of fault segments and the interaction through dip‐linkage and fault reactivation, between two overlapping, spatially and temporally independent delta systems of Cenomanian and late Santonian‐Maastrichtian age in the frontier Ceduna Sub‐Basin. This study has implications regarding the growth of normal fault assemblages, through vertical and lateral segment linkage, for other stacked delta systems (such as the Gulf of Mexico) where upper delta systems develop over a pre‐existing structural framework.     

Response of unconfined turbidity current to relay‐ramp topography: insights from process‐based numerical modelling

This natural‐scale experimental study combines structural modelling of soft‐linked normal‐fault relays with a CFD (computational fluid dynamics) numerical simulation of a range of unconfined turbidity currents overrunning the relay‐system topography. The flow, released from an upslope inlet gate 2000‐m wide and 50‐m to 100‐m high, rapidly expands and adjusts its thickness, velocity and sediment load to the substrate slope of 1.5°. A lower initial sediment concentration or smaller thickness renders the quasi‐steady flow slower and its sediment‐transport capacity lower. A 3D pattern of large interfering Kelvin‐Helmholtz waves causes fluctuations of the local flow velocity magnitude and sediment concentration. Four zones of preferential sediment deposition are recognized: a near‐gate zone of abrupt flow expansion and self‐regulation; a flow‐transverse zone on the counter‐slope of fault footwall edges; a flow‐transverse zone at the fault‐scarp toes and a similar transverse zone near the crest of the hanging wall counter‐slopes. The sand deposited on the counter‐slope tends to be re‐entrained and fed back to the current by a secondary reverse underflow. The spatial extent and sediment accumulation capacity of depozones depend upon the released current volume. The impact of relay system on an overrunning current depends upon the fault separation distance and stage of tectonic evolution. An early‐stage relay system, with small vertical displacement and little overlap of faults, is bypassed by the current with minimum flow disturbance and no pronounced deposition. An advanced‐stage system, with greater fault displacement and overlap, gives a similar hydraulic effect as a single fault segment if the fault separation is small. If the separation is relatively large, the flow tends to be internally redirected sideways from the ramp into the hanging wall synclinal depressions. Since normal‐fault relays are common features in extensional basins, the study bears important implications for turbiditic slope‐fan models and for the spatial sand prediction in subsurface exploration of faulted submarine slopes.     

Regional magma plumbing and emplacement mechanisms of the Faroe‐Shetland Sill Complex: implications for magma transport and petroleum systems within sedimentary basins

The movement of magma through the shallow crust and the impact of subsurface sill complexes on the hydrocarbon systems of prospective sedimentary basins has long been an area of interest and debate. Based on 3D seismic reflection and well data, we present a regional analysis of the emplacement and magmatic plumbing system of the Palaeogene Faroe‐Shetland Sill Complex (FSSC), which is intruded into the Mesozoic and Cenozoic sequences of the Faroe‐Shetland Basin (FSB). Identification of magma flow directions through detailed seismic interpretation of approximately 100 sills indicates that the main magma input zones into the FSB were controlled primarily by the NE–SW basin structure that compartmentalise the FSB into its constituent sub‐basins. An analysis of well data shows that potentially up to 88% of sills in the FSSC are <40 m in thickness, and thus below the vertical resolution limit of seismic data at depths at which most sills occur. This resolution limitation suggests that caution needs to be exercised when interpreting magmatic systems from seismic data alone, as a large amount of intrusive material could potentially be missed. The interaction of the FSSC with the petroleum systems of the FSB is not well understood. Given the close association between the FSSC and potential petroleum migration routes into some of the oil/gas fields (e.g. Tormore), the role the intrusions may have played in compartmentalisation of basin fill needs to be taken fully into account to further unlock the future petroleum potential of the FSB.     

Across‐axis variations in petrophysical properties of the North Porcupine Basin,offshore Ireland: New insights from long‐streamer traveltime tomography

The Porcupine Basin is a Mesozoic failed rift located in the North Atlantic margin, SW of Ireland, in which a postrift phase of extensional faulting and reactivation of synrift faults occurred during the Mid–Late Eocene. Fault zones are known to act as either conduits or barriers for fluid flow and to contribute to overpressure. Yet, little is known about the distribution of fluids and their relation to the tectono‐stratigraphic architecture of the Porcupine Basin. One way to tackle this aspect is by assessing seismic (V_p) and petrophysical (e.g., porosity) properties of the basin stratigraphy. Here, we use for the first time in the Porcupine Basin 10‐km‐long‐streamer data to perform traveltime tomography of first arrivals and retrieve the 2D V_p structure of the postrift sequence along a ~130‐km‐long EW profile across the northern Porcupine Basin. A new V_p–density relationship is derived from the exploration wells tied to the seismic line to estimate density and bulk porosity of the Cenozoic postrift sequence from the tomographic result. The V_p model covers the shallowest 4 km of the basin and reveals a steeper vertical velocity gradient in the centre of the basin than in the flanks. This variation together with a relatively thick Neogene and Quaternary sediment accumulation in the centre of the basin suggests higher overburden pressure and compaction compared to the margins, implying fluid flow towards the edges of the basin driven by differential compaction. The V_p model also reveals two prominent subvertical low‐velocity bodies on the western margin of the basin. The tomographic model in combination with the time‐migrated seismic section shows that whereas the first anomaly spatially coincides with the western basin‐bounding fault, the second body occurs within the hangingwall of the fault, where no major faulting is observed. Porosity estimates suggest that this latter anomaly indicates pore overpressure of sandier Early–Mid Eocene units. Lithological well control together with fault displacement analysis suggests that the western basin‐bounding fault can act as a hydraulic barrier for fluids migrating from the centre of the basin towards its flanks, favouring fluid compartmentalization and overpressure of sandier units of its hangingwall.     

Polygonal faults-furrows system related to early stages of compaction – upper Miocene to recent sediments of the Lower Congo Basin

A new polygonal fault system has been identified in the Lower Congo Basin. This highly faulted interval (HFI), 700±50 m thick, is characterized by small extensional faults displaying a polygonal pattern in plan view. This kind of fracturing is attributed to volumetric contraction of sediments during early stages of compaction at shallow burial depth. 3‐D seismic data permitted the visualization of the progressive deformation of furrows during burial, leading to real fractures, visible on seismic sections at about 78 m below seafloor. We propose a new geometrical model for volumetrical contraction of mud‐dominated sediments. Compaction starts at the water–sediment interface by horizontal contraction, creating furrows perpendicular to the present day slope. During burial, continued shrinkage evolves to radial contraction, generating hexagonal cells of dewatering at 21 m below seafloor. With increasing contraction, several faults generations are progressively initiated from 78 to 700 m burial depth. Numerous faults of the HFI act as highly permeable pathways for deeper fluids. We point out that pockmarks, which represent the imprint of gas, oil or pore water escape on the seafloor, are consistently located at the triple‐junction of three neighbouring hexagonal cells. This is highly relevant for predictive models of the occurrence of seepage structures on the seafloor and for the sealing capacity of sedimentary cover over deeper petroleum reservoirs.     

Sediment routing evolution in the North Alpine Foreland Basin,Austria: interplay of transverse and longitudinal sediment dispersal

Integration of detrital zircon geochronology and three‐dimensional (3D) seismic‐reflection data from the Molasse basin of Austria yields new insight into Oligocene‐early Miocene palaeogeography and patterns of sediment routing within the Alpine foreland of central Europe. Three‐dimensional seismic‐reflection data show a network of deep‐water tributaries and a long‐lived (>8 Ma) foredeep‐axial channel belt that transported Alpine detritus greater than 100 km from west to east. We present 793 new detrital zircon ages from 10 sandstone samples collected from subsurface cores located within the seismically mapped network of deep‐water tributaries and the axial channel belt. Grain age populations correspond with major pre‐Alpine orogenic cycles: the Cadomian (750–530 Ma), the Caledonian (490–380 Ma) and the Variscan (350–250 Ma). Additional age populations correspond with Eocene‐Oligocene Periadriatic magmatism (40–30 Ma) and pre‐Alpine, Precambrian sources (>750 Ma). Although many samples share the same age populations, the abundances of these populations vary significantly. Sediment that entered the deep‐water axial channel belt from the west (Freshwater Molasse) and southwest (Inntal fault zone) is characterized by statistically indistinguishable age distributions that include populations of Variscan, Caledonian and Cadomian zircon at modest abundances (15–32% each). Sandstone from a shallow marine unit proximal to the northern basin margin consists of >75% Variscan (350–300 Ma) zircon, which originated from the adjacent Bohemian Massif. Mixing calculations based on the Kolmogorov–Smirnoff statistic suggest that the Alpine fold‐thrust belt south of the foreland was also an important source of detritus to the deep‐water Molasse basin. We interpret evolving detrital zircon age distributions within the axial foredeep to reflect a progressive increase in longitudinal sediment input from the west (Freshwater Molasse) and/or southwest (Inntal fault zone) relative to transverse sediment input from the fold‐thrust belt to the south. We infer that these changes reflect a major reorganization of catchment boundaries and denudation rates in the Alpine Orogen that resulted in the Alpine foreland evolving to dominantly longitudinal sediment dispersal. This change was most notably marked by the development of a submarine canyon during deposition of the Upper Puchkirchen Formation that promoted sediment bypass eastward from Freshwater Molasse depozones to the Molasse basin deep‐water axial channel belt. The integration of 3D seismic‐reflection data with detrital zircon geochronology illustrates sediment dispersal patterns within a continental‐scale orogen, with implications for the relative role of longitudinal vs. transverse sediment delivery in peripheral foreland basins.