Delineation of saltwater intrusion zones using the time domain electromagnetic method: the Nabeul–Hammamet coastal aquifer case study (NE Tunisia)

The time domain electromagnetic method (TDEM) is applied to monitor, to delineate and to map the saltwater intrusion zones in the Mediterranean Plio‐Quaternary aquifer. Forty‐two TDEM soundings were carried out in the coastal plain of Nabeul–Hammamet region (NE Tunisia). TDEM resistivity data were correlated with the existing borehole logging data to assign them to a particular lithology and to provide information about the position of the freshwater–seawater transition zone. The geoelectric sections showing the vertical configuration of seawater intrusion, with the brackish‐salty‐saturated zones, have a resistivity ranging from ~0.1 to 5 Ω?m and are detected at a depth lower than 1.5 m. The salinized zones are located at Nabeul (Sidi Moussa, Sidi El Mahrsi, Al Gasba and Mrazgua) and at Hammamet (Touristic zone of Hammamet north and south, Baraket Essahel) and reached a distance of 4 km from the coastline, indicating a severe state for the aquifer in these zones. These TDEM results are confirmed by the increase of chloride concentration content in the analysed water samples of monitoring wells. Moreover, in the northeastern part, the presence of a saltwater front located far from the coast and along the NW–SE major surface fault can be explained by two hypothesis: (i) this fault seems to provide a conduit for seawater to move readily towards the water wells and (ii) the clay and gypsum infiltration of marine Messinian deposits through the fault plane leads to low resistivities. Finally, it comes out from this study that TDEM survey has successfully depicted salinized zones of this coastal aquifer. Copyright © 2012 John Wiley & Sons, Ltd.     

Delineation of Shallow Subsurface Structure by Azimuthal Resistivity Sounding and Joint Inversion of VES-TEM Data: Case Study near Lake Qaroun, El Fayoum, Egypt

An azimuthal resistivity survey was conducted at the transition zone between the desert area and the cultivated land near Lake Qaroun, Egypt. This area has been affected by an east-west trending fault system as indicated from the surface geology. Apparent resistivity values were plotted along azimuth on a polar diagram. Resistivity anomalies, for most of the AB/2 values with long axes strike in a direction parallel to the contact between the desert and cultivated lands, indicate the presence of electrical macro-anisotropy, mainly due to the faulting effect, at this area. Vertical electrical soundings (VES) and transient electromagnetic (TEM) measurements were conducted at eight stations along a line that crosses the boundary between the desert and cultivated land. Joint inversion of VES-TEM data was successfully used for identification of the subsurface lithostratigraphic succession and demonstrated the effect of the fault zone on the investigated subsurface medium. Apparent anisotropy coefficients at all current electrode spacings were calculated, plotted against AB/2 values and compared with the geoelectrical cross section. The effect of the fault zone was detected at AB/2 spacings equal to 100 m and extended downward and is largely related to the depth of the fault, as indicated in the constructed cross section.     

2.5-D Gravity/Magnetic Model Studies in Sahl El Qaa Area, Southwestern Sinai, Egypt

The 2.5-D gravity-magnetic models of the upper crustal structures of Sahl El Qaa Area, Southwestern Sinai were constructed along seven profiles, focusing on the uppermost crustal layers to a depth of 4–5 km. In addition separation filtering process; spectral analysis and trend analysis were used to investigate the Bouguer and total intensity aeromagnetic field maps qualitatively and quantitatively. The study showed that the regional structures consist of tilted blocks in the form of a major NW-synclinal feature with an axis dipping northward. This feature is dissected by the NE trending cross faults forming horsts, grabens and step-fault structures. The tilted blocks are controlled by a major normal fault system and are greatly modified in the dip regime from north to south. They show a regional NW dip regime in northern and southern parts, where the depth to the basement reaches about 2–3 km in the down dip. In the central portion, the basin is dipping steeply to the east, with maximum depths attaining about 4–5 km.     

Aquifer modelling of the Ganga–Mahawa sub‐basin,a part of the Central Ganga Plain,Uttar Pradesh,India

The Ganga–Mahawa sub‐basin, which has an area of 1280 km² forms the western part of the Central Ganga Plain in the Moradabad and Badaun districts of western Uttar Pradesh, India. The Bundelkhand granite forms the basement complex, overlain unconformably by the upper Vindhyan sequence, which is further overlain by the Neogene (Middle and Upper) Siwaliks and finally by Quaternary alluvium. Four geomorphological units, the Varanasi older alluvial plain, Aligarh older alluvial plain, terrace zones and the Ganga recent floodplain, abandoned channels, channel scars and meander scars represent various landforms. The hydrogeological cross‐sections indicate the occurrence of a single aquifer down to 120 m. Some influent seepage from the River Ganga could be seen around Gangeswari, but the rest of the River Ganga is effluent. Groundwater‐flow modelling was carried out to assess the degree of Ganga river and aquifer interaction. The River Ganga marks the western boundary; boundaries to the northeast and southeast are set as fixed heads to simulate lateral inflow into and outflow from the sub‐basin respectively. The eastern boundary is simulated as a no‐flow condition. The Mahawa and Badmar rivers are considered to be effluent. The area modelled is covered by a grid of 34 rows×46 columns with three layers, viz., an unconfined aquifer, an aquitard which is underlain by a semi‐confined to confined aquifer. The permeability distribution was inferred from morphometric analysis and pumping tests. Natural recharge due to monsoon rainfall forms the main input. The River Ganga stage data at Ahar, Naora and Ramghat has been used for assigning surface water levels and river bed elevations in the model. Abstraction from all existing deep and shallow tube wells has been assigned as output at various cells. A steady state flow simulation was carried out and calibrated against the June 1986 water level; subsequent transient conditions were calibrated up to May 1995. The computed groundwater balance was comparable to that estimated from field investigations. The aquifer modelling study has attempted to integrate all available information and provided a tool that could be used for predictive simulation. Copyright © 2000 John Wiley & Sons, Ltd.     

Geophysical Constraints on the Hydrogeologic and Structural Settings of the Gulf of Suez Rift-Related Basins: Case Study from the El Qaa Plain,Sinai, Egypt

Groundwater has been identified as one of the major freshwater sources that can potentially meet the growing demands of Egypt’s population. Gravity data (from 381 ground gravity stations) were collected, processed, and analyzed together with the available aeromagnetic (800 line-km) data to investigate the hydrogeologic and structural settings, areal distribution, geometry, and water storage of the aquifers in El Qaa coastal plain in the southwest Sinai Peninsula, and to assess their longevity given projected extraction rates. Findings include (1) complete Bouguer anomaly and total magnetic intensity maps show two connected sub-basins separated by a narrow saddle with an average basin length of 43 km and an average width of 12 km; (2) two-dimensional modeling of both gravity and magnetic data indicates basin fill with a maximum thickness of 3.5 km; (3) using anomalous residual gravity, the volume of water in storage was estimated at 40–56 km³; and (4) progressive increases in extraction rates over time will deplete up to 40 % of the aquifers’ volume in 200–230 years and will cause the water quality to deteriorate due to seawater intrusion in 45 years. Similar geophysical exploration campaigns, if conducted over the entire coastal plains of the Red Sea and the Gulfs of Suez and Aqaba, could assist in the development of sound and sustainable management schemes for the freshwater resources in these areas. The adopted techniques could pave the way toward the establishment of sustainable utilization schemes for a much larger suite of similar aquifers worldwide.     

Interpretation case study of the Sahl El Qaa area, southern Sinai Peninsula, Egypt

The study area is located in the Sinai Peninsula, which is considered one of the most promising regions for oil resources. Three different tectonic forces affect the area in the triple junction structures associated with the opening of the Gulf of Suez and the strike slip movement along the Gulf of Aqaba. The main goal of this work is to model the structure of the basement rocks in the study area using magnetic methods. To achieve this, a high-resolution land magnetic survey was acquired and the results were combined with existing seismic reflection data. The magnetic interpretation was carried out using the analytical signal, horizontal gradient, Euler and Werner deconvolution and 3D magnetic modelling methods. We concluded that most of the deduced structures are trending in N–S, N35°–N45° west and E–W directions. The Aqaba trend (N15°–N25° east) is barely noticeable. The depth to the basement rocks ranges from 1 km to more than 2 km below sea level and these results are in agreement with the available well log data. In addition, interpretation of seismic reflection sections was carried out and compared with overlapping magnetic profiles interpreted using Euler deconvolution. They show that the sedimentary section was affected by the basement tectonics, with faults extending from the basement upwards through the sedimentary cover. These faults constitute good potential structural traps for oil accumulation.     

Geoelectrical structure and hydrogeological investigations of the southern Rif Cordillera (Morocco)

An electrical prospecting survey is conducted in the Rharb basin, a semi‐arid region in the southern part of the Rifean Cordillera (Morocco) to delineate characteristics of the aquifer and the groundwater affected by the marine intrusion related to Atlantic Ocean. Analysis and interpretations of electrical soundings, bi‐logarithmic diagrams and the geoelectrical sections highlight a monolayer aquifer in the southern part, a multilayer system in the northern part of the Rharb basin and lenticular semi‐permeable formations. Several electrical layers have been deduced from the analysis of bi‐logarithmic diagrams: resistant superficial level (R₀), conducting superficial level (C₀), resistant level (R), intermediary resistant level (R′), conducting level (Cp) and intermediary layer of resistivity (AT). Spatial distribution of the resistivity deduced from the interpretation of apparent resistivity maps (AB = 400 and 1000 m) and the decreasing of resistivity values (35–10 Ωm), in particular in the coastal zone show that this heterogeneity is related to several anomalies identified in the coastal area, which result from hydraulic and geological processes: (i) heterogeneous hydraulic conductivity in particular in the southern part of the Rharb; (ii) lateral facies and synsedimentary faulting and (iii) the relationship between the electrical conductivity and chloride concentration of groundwater shows that salinity is the most important factor controlling resistivity. The distribution of fresh/salt‐water zones and their variations in space along geoelectrical sections are established through converting subsurface depth‐resistivity models. Copyright © 2010 John Wiley & Sons, Ltd.     

Saltwater intrusion modelling in Jorf coastal aquifer,South‐eastern Tunisia: geochemical,geoelectrical and geostatistical application

Marine intrusion is the most serious problem facing the coastal Jorf shallow aquifer, located in south‐eastern Tunisia on the Mediterranean Sea. Jorf Aquifer is intensively exploited to supply the growing needs of agriculture and domestic sectors. This work proposes a multidisciplinary investigation, involving hydro‐geochemical, geoelectrical survey and geostatistical techniques for modelling the saltwater intrusion. For this purpose, 36 water samples were conducted and analysed. Electric conductivity, pH, total dissolved solids and major ions were measured and analysed. Pie and Durov Diagrams, Q‐mode hierarchical cluster and geostatistical analysis were considered to identify the main groundwater mineralization processes. Results revealed that the Na‐Cl‐Ca‐SO₄ is the dominant water type suggesting that dissolution of halite and gypsum was the main mineralization source of groundwater in the central and southern part of study area. However, saltwater intrusion was shown to control groundwater quality essentially in coastal areas. Variographic analyses were used to select the variographic model that best fits the spatial development of apparent resistivity. Kriged apparent resistivity profiles showed an abnormal decrease of resistivity values in the coastal zone, implying highly saline water because of seawater intrusion. Apparent resistivity values also decrease considerably in the faulted areas, suggesting a contribution of faults to seawater intrusion. Finally, saltwater mixing ratio was computed for each sample, and a refined seawater intrusion map was developed. Copyright © 2012 John Wiley & Sons, Ltd.     

Morphology,structure and flow phases in soil pipes developing in forested hillslopes underlain by a Quaternary sand–gravel formation,Hokkaido, northern main island in Japan

Preferential flow pathways, such as soil pipes, are usually present in the soil of slopes. Subsurface flow through the soil pipes affects the subsurface drainage system and is responsible for sediment removal from slopes. However, a record of the inner structure of soil pipes has rarely been reported for slopes. A fibrescope examination of the morphology and flow phases in soil pipes in hillslopes underlain by a Quaternary sand–gravel formation provided the following information: the main pores of the soil pipes ran mostly parallel with the slope gradient; the cross‐sections of the soil pipes were approximately circular; and occurred on a few occasions; with some triple junctions being present. In addition, both full flow and partly full‐depth conditions occurred simultaneously in the soil pipe. The full flow condition has long been used in hydrological studies to model the pipe flow mechanism. Both the full flow condition and the partly full‐depth condition, however, must be examined closely in order to evaluate the subsurface hydrology in heterogeneous soil and the hydrogeomorphological processes of subsurface hydraulic erosion. Copyright © 2000 John Wiley & Sons, Ltd.     

A Coastal Aquifer Study Using Magnetotelluric and Gravity Methods in Abo Zenema, Egypt

Magnetotelluric (MT) soundings and gravity methods were employed to study the deep freshwater aquifer in the area north of Abo Zenema city on the eastern side of the Gulf of Suez, Egypt. Seven MT sites and 48 gravity stations were surveyed along northeast–southwest profiles as close as possible to a line perpendicular to the coast of the Gulf of Suez. The MT survey was conducted using high and low frequencies to investigate shallow and deep areas, respectively. One-dimensional inversion was conducted using a heuristic inversion scheme of the Bostick algorithm. The MT data were also inverted with a 2-D smooth model inversion routine using the nonlinear conjugate gradient method to infer variation in vertical and lateral resistivity inside the Earth. A 100-Ohm-m homogeneous half-space initial model was used to invert the TE mode data only. Then, the inverted model obtained from the TE mode data was used as an initial model for inversion of the TM mode data. The inverted model thus obtained from the TM mode data inversion was used as an initial model for the inversion of the joint TE and TM responses. Two-dimensional (2-D) forward modeling of the gravity data was conducted using the 2-D polygon method of Talwani’s algorithm for an arbitrarily shaped body and was based on the subsurface information from the MT survey and the available information about the geological structure of the study area. This method enabled us to obtain the basement structure of the coastal aquifer in the study area. The results from the analysis and the interpretation of MT and gravity data were used to detect and delineate the groundwater coastal aquifer in the study area.     

Research on the Seismotectonic Setting in Beibu Gulf Waters

In this paper we discuss the seismogenic structures of the two earthquakes occurring in the Beibu Gulf waters,based on the investigation of geological structure,faults,geophysical fields,seismicity and earthquake focal mechanism.The results show that the NEE trending faults along the boundary of the Wushi depression are the dominating seismogenic structures,and the NW trending faults are the key factors of stress concentration.The results also show that high seismicity has a significant relationship with the late Cenozoic deposition center in the Beibu Gulf,and their NE-NEE trending boundary faults are important to the identification of seismogenic structures.The special arcuate fault segment or the intersection point of the NW trending faults and NE-NEE trending boundary faults is a possible location of future earthquakes.     

北京平原区隐伏断裂晚第四纪活动特征的联合剖面研究

通过地形地质、化探、浅层物探、钻探和槽探等多手段的联合剖面探测研究，首次查明了夏垫隐伏断裂和南口－孙河隐伏断裂的准确位置及其活动性，发现上述隐伏断裂同时具有缓慢同生断裂运动和间隙性突发位错两种运动型式。夏垫隐伏断裂在距今５０００年以来有过两次与７级以上地震相当的突发性断层位错；南口－孙河隐伏断裂在最近的１．２万年以来仅发生一次约相当７级地震的突发性断裂位错。这表明，北京平原区的各个隐伏断裂自晚第四     

Geophysical surveys for identifying saline groundwater in the semi‐arid region of the central Altiplano,Bolivia

In the central part of the Bolivian Altiplano, the shallow groundwater presents electrical conductivities ranging from 0·1 to 20 mS/cm. In order to study the origin of this salinity pattern, a good knowledge is required of the geometry of the aquifer at depth. In this study, geophysics has been used to complement the sparse data available from drill holes. One hundred time‐domain electromagnetic (TDEM) soundings were carried out over an area of 1750 km². About 20 geological logs were available close to some of the TDEM soundings. Three intermediate results were obtained from the combined data: (i) the relationship between the electrical conductivity of the groundwater and the formation resistivity, (ii) geoelectrical cross‐sections and (iii) geoelectrical maps at various depths. The limited data set shows a relationship between resistivity and the nature of the rock. From the cross‐sections, a conductive substratum with a resistivity of less than 1 Ω·m was identified at most of the sites at depths ranging from 50 to 350 m. This substratum could be a clay‐rich formation containing brines. Using derived relationships, maps of the nature of the formation (sandy, intermediate and clayey sediments) were established at depths of 10 and 50 m. Discrimination between sand and clays was impossible where groundwater conductivity is high (>3 mS/cm). In the central part of the area, where the groundwater conductivity is low, sandy sediments are likely to be present from the surface to a depth of more than 200 m. Clayey sediments are more likely to be present in the south‐east and probably constitute a hydraulic barrier to groundwater flow. In conclusion, the study demonstrates the efficiency of the TDEM sounding method to map conductive zones. Copyright © 2001 John Wiley & Sons, Ltd.     

Illuminating and optimising a three‐dimensional model of an oil shale seam and its volume distribution using the transient electromagnetic induction method,central part of Jordan

The oil shale exploration program in Jordan is undertaking great activity in the domain of applied geophysical methods to evaluate bitumen‐bearing rock. In the study area, the bituminous marl or oil shale exhibits a rock type dominated by lithofacies layers composed of chalky limestone, marls, clayey marls, and phosphatic marls. The study aims to present enhancements for oil shale seam detection using progressive interpretation from a one‐dimensional inversion to a three‐dimensional modelling and inversion of ground‐based transient electromagnetic data at an area of stressed geological layers. The geophysical survey combined 58 transient electromagnetic sites to produce geoelectrical structures at different depth slices, and cross sections were used to characterise the horizon of the most likely sites for mining oil shale. The results show valuable information on the thickness of the oil shale seam at 3.7 Ωm, which is correlated to the geoelectrical layer between 2‐ and 4 ms transient time delays, and at depths ranging between 85 and 105 m. The 300 m penetrated depth of the transient electromagnetic soundings allows the resolution of the main geological units at narrow resistivity contrast and the distinction of the main geological structures that constrain the detection of the oil shale seam. This geoelectrical layer at different depth slices illustrates a localised oil shale setting and can be spatially correlated with an area bounded by fold and fault systems. Also, three‐dimensional modelling and inversion for synthetic and experimental data are introduced at the faulted area. The results show the limitations of oil shale imaging at a depth exceeding 130 m, which depends on the near‐surface resistivity layer, the low resistivity contrast of the main lithological units, and the degree of geological detail achieved at a suitable model's misfit value.     

Cenozoic structural deformation and expression of the “Tan-Lu Fault Zone” in the West Sag of Liaohe Depression, Bohaiwan basin province, China

Based on the interpretation of 3D seismic data and structural mapping we analyzed the geometry and kinematics of the fault system and validated the expression of the “Tan-Lu Fracture Zone” in the West Sag of Liaohe Depression, Bohaiwan basin province. The Cenozoic structural deformation within the West Sag of Liaohe Depression can be divided into extensional structure system and dextral structure system. The extensional system is constituted by numerous NNE-NE trending Paleogene normal faults, where the Taian-Dawa fault (F1) is the master boundary fault (MBF) dominating the deposition during Paleogene so that the sag shows a complex half-graben with “boundary fault in the east and overlap in the west”. The dextral system is constituted by 2–3 dextral basement faults in NNE-NE trending (F2, F3, F4) and associated structure, and the time of structural action started in Oligocene and continued to Quarternary so that some associated secondary faults of the dextral system cut off the Neogene and Quaternary. Under the influence of the position and attitude of NNE-NE trending basement strike-slip faults, the central north part and the south part of the West Sag show obviously different structural features. The former appears to be a complex “graben” structure limited by the reversed strike-slip fault in the west and bounded by the inverted normal fault in the east, the latter remains the complex half-graben structure with “boundary fault in the east and overlap in the west”, and the graben was mildly reconstructed by one or two normal strike-slip faults. The dextral system within the West Sag is the element of the west branch fault of the Tan-Lu Fracture Zone, which is a deep fracture zone extending along the east of the Liaodongwan Gulf. The deep fracture zone branches off into two separate faults within the Liaohe Depression. The east branch goes through from northern part of the Liaodongwan Gulf to the East Sag of Liaohe Depression and links with the Denghua-Mishan Fault near Shenyang, and the west branch passes from northern part of the Liaodongwan Gulf to the West Sag and Damintun Sag of Liaohe Depression and links with the Yilan-Yitong Fault. The principal displacement zone of the west branch of the Tan-Lu Fracture Zone cuts off the master extensional fault (F1) within the West Sag of Liaohe Depression and induces many cover faults in EW trending within the Neogene and Quaternary.     

Fault-generated mountain fronts in the central apennines (Central Italy): Geomorphological features and seismotectonic implications

The morphotectonic framework of the Central Apennines is given by faulted blocks bounded by normal faults, mostly trending NW–SE, NNW–SSE and NE–SW, which cut previous compressive structures. Such a structural setting is consistent with the focal mechanisms of the earthquakes which often occur in this area. In this paper, three lithologically different normal fault-generated mountain fronts are analysed in order to assess the relations between their geomorphic features and active tectonics. They border the Norcia depression (Sibillini Mts, Umbria), the Amatrice–Campotosto plateau (Laga Mts, Lazio) and the Fucino basin (Marsica Mts, Abruzzi). The Norcia depression is bounded by a N20°W trending normal fault to the east and by a parallel antithetic fault to the west. The main fault has a 1000 m throw and gives rise to a wide fault escarpment, characterized by: (1) sharp slope breaks due to low angle gravity faults; (2) important paleolandslides; and (3) several fault scarplets on the piedmont belt affecting Quaternary deposits. The Amatrice–Campotosto plateau is delimited by the western slope of Mt Gorzano which runs along a N20°W trending normal fault having a 1500m throw. Minor parallel faults dislocate Quaternary landforms. Large-scale massmovements also occur here. The Fucino basin was struck by the 1915 Avezzano earthquake (I=XI MCS) which produced extensive surface faulting along two parallel NW trending normal fault escarpments on the eastern border of the basin. There is paleoseismic evidence including buried gravity graben in Late Glacial gravels and tectonic dip-slip striations on Holocene calcitic crusts covering bedrock normal fault planes. These data suggest that active extensional tectonics plays a major role in the slope morphogenesis of the Central Apennines and they indicate the importance of geomorphic analysis in seismic zonation of this area.     

The Quaternary development of tributary channels to the Nile River at Kom Ombo area,Eastern Desert of Egypt,and their implication for groundwater resources

The dry wadis ‘ephemeral channel’ constituting the main tributaries to the Nile River in Kom Ombo are structurally and tectonically controlled and exhibit complex drainage pattern. This complicated drainage pattern is inherited from the morpho‐tectonic evolution of the ancestral Nile River (‘Protonile’), which drained the Eastern Desert during the Middle Pleistocene. A digital elevation model derived from Shuttle Radar Topography Mission data is used to delineate the contemporary drainage networks and their catchments. Satellite images acquired during a flash flood event were used to validate the delineated watershed divides and flow pathways, particularly where the courses of dry wadis are interlocked. Currently, the westward flow of Wadi Abu‐Suberah is derived from a small area in the Eastern Desert, as the palaeo‐upper reaches of this wadi were captured due to tectonic movements along NW/SE and N/S faults by wadis in the Kharit and Elewa areas. The influence of these tectonic movements on groundwater distribution is also shown where the deep Nubian aquifer discharges its water into the Quaternary aquifer through fault planes. The northward flowing ‘Protonile’ main course has tectonically shifted from the Gallaba plain in the Western Desert, eastward to the current Nile River course. This shift has produced several cut‐off segments of the palaeo‐tributary drainage that was originally flowing westward towards the old ‘Protonile’ main course in the Gallaba plain. However, these segments have reversed their surface run‐off flow directions eastward towards the current Nile course; they could include potential groundwater resources, as their alluvium may be still recharged by the Nile River. Copyright © 2010 John Wiley & Sons, Ltd.     

Fault zone hydrogeology in arid environments: The origin of cold springs in the Wadi Araba Basin,Egypt

The role of faults in controlling groundwater flow in the Sahara and most of the hyper-arid deserts is poorly understood due to scarcity of hydrological data. The Wadi Araba Basin (WAB), in the Eastern Sahara, is highly affected by folds and faults associated with Senonian tectonics and Paleogene rifting. Using the WAB as a test site, satellite imagery, aeromagnetic maps, field observations, isotopic and geochemical data were examined to unravel the structural control on groundwater flow dynamics in the Sahara. Analysis of satellite imagery indicated that springs occur along structurally controlled scarps. Isotopic data suggested that cold springs in the WAB showed a striking similarity with the Sinai Nubian aquifer system (NAS) water and the thermal springs along the Gulf of Suez (e.g., δ¹⁸O = −8.01‰ to −5.24‰ and δD = −53.09‰ to −31.12‰) demonstrating similar recharge sources. The findings advocated that cold springs in the WAB represent a natural discharge from a previously undefined aquifer in the Eastern Desert of Egypt rather than infiltrated precipitation over the plateaus surrounding the WAB or through hydrologic windows from deep crystalline basement flow. A complex role of the geological structures was inferred including: (1) channelling of the groundwater flow along low-angle faults, (2) compartmentalization of the groundwater flow upslope from high-angle faults, and (3) reduction of the depth to the main aquifer in a breached anticline setting, which resulted in cold spring discharge temperatures (13–22°C). Our findings emphasize on the complex role of faults and folds in controlling groundwater flow, which should be taken into consideration in future examination of aquifer response to climate variability in the Sahara and similar deserts worldwide.     

Marine and human activity influences on the groundwater quality of southern Korinthos area (Greece)

In this paper the groundwater quality of the southern part of Korinthos region (north‐east Peloponnese) is discussed. The geology is characterized by a thick sequence of Neogene marls alternating with sandstones, overlain by superficial Quaternary deposits. The latter consist of a mixture of loose materials such as conglomerates, marly sandstones, sands and clay to silty sands. The area is crossed by a fault system parallel to the coastline, and the Quaternary sediments have formed extended Tyrrhenian marine terraces. Two aquifers have been identified in the area. The first is unconfined and occurs within the Quaternary sediments whereas the other is a deep confined aquifer occurring within the underlying Neogene marl series. Analysis of hydrochemical evolution over the past 30 years has indicated significant deterioration of quality owing to seawater intrusion and nitrate pollution. The various sources of pollution have rendered, to a large extent, shallow groundwater unsuitable not only for potable water supply but also for irrigation purposes. However, this is not the case for the deeper confined aquifer. Statistical analysis was used to explore the evolution of salinization during the years 1968 and 1998. In view of the alarming conditions caused by the documented groundwater quality deterioration, the need for integrated water resources management is stressed to maintain the socio‐economic growth of the region studied. Copyright © 2003 John Wiley & Sons, Ltd.     

Preliminary Study on Cenozoic Group and Fault Activity in the Sea Area Near the Yangtze River Mouth

By shallow seismic prospecting, the Cenozoic Group in the sea area near the Yangtze Rver Mouth can be divided into five seismic sequences. They correspond to the Quaternary,Pliocene, Upper Miocene, Lower Miocene and Eocene respectively. The Quaternary System covers all the detecting area. The Tertiary System overlaps and thins out from NE to SW. The sedimentary basement mainly consists of volcanic rock (J3) and acidic rock (r35). Paleogene or Late Cretaceous basins are not found there. The faults that have been detected are all normal faults. They can be divided into three groups (NE, NW, near EW) by their trend. The NE and NW-trending faults are predominant, and agree with aeromagnetic anomaly. Their length and displacement are larger than that of the EW-trending faults. The activity of the NEtrending faults is different in different segments. The SW segment is a Quaternary fault, the middle segment is a Neogene fault, The NE is Paleogene. But the segment of the NW-trending fault is not obvious. The average vertical displacement rate is about 0.015mm/a.