Anatomy of ancient passive margin slope systems: Aptian gravity-driven deposition on the Vocontian palaeomargin, western Alps, south-east France

The Aptian succession on the Vocontian palaeomargin (south-east France) consists of marl and marly calcareous pelagic slope facies together with a range of gravity-driven deposits (slumps, debris-flow deposits, turbidite packages and massive sandstones). The massive sandstones were emplaced by high-density turbidity currents and are associated with extensive clastic sills and dykes. The sedimentology is constrained by a high-resolution bio- and lithostratigraphic framework and permits a detailed analysis of the slope succession including: (1) a sequence stratigraphical analysis of the slope deposits; and (2) lateral tracing of individual sedimentary packages downslope. The resulting model for the Vocontian slope represents an alternative to the ‘classic’ Exxon delta-fed, mud-rich model. Key elements of the Vocontian model are: (1) an emphasis on lowstand slope erosion and complex slope morphology controlled by contemporary tectonism and salt diapirism; (2) slope deposition in confined erosional and structurally controlled conduits rather than the buildout of slope fans/channel-levee complexes; (3) a dominance of large-volume muddy slump and transitional debris-flow deposits, with subordinate sandy turbidites, including significant massive sandstone facies; (4) common sand injections (sills and dykes) associated with the massive sandstone facies; and (5) minimal downslope evolution of the flows, with the nature of the source sediment being the over-riding factor determining flow behaviour and deposit character. The Vocontian system is a rare instance in which large sections of a ‘fossil’ passive margin slope are preserved in the geological record. The slope deposits differ from the classic models of turbidite systems that have mainly been built from peripheral foreland basins, and the new insight makes it possible to compare ancient and present-day passive margin slope systems.     

Transition from storm wave‐dominated outer shelf to gullied upper slope: The mid‐Pliocene Orinoco shelf margin,South Trinidad

Shelf‐edge deltas are a key depositional environment for accreting sediment onto shelf‐margin clinoforms. The Moruga Formation, part of the palaeo‐Orinoco shelf‐margin sedimentary prism of south‐east Trinidad, provides new insight into the incremental growth of a Pliocene, storm wave‐dominated shelf margin. Relatively little is known about the mechanisms of sand bypass from the shelf‐break area of margins, and in particular from storm wave‐dominated margins which are generally characterized by drifting of sand along strike until meeting a canyon or channel. The studied St. Hilaire Siltstone and Trinity Hill Sandstone succession is 260 m thick and demonstrates a continuous transition from gullied (with turbidites) uppermost slope upward to storm wave‐dominated delta front on the outermost shelf. The basal upper‐slope deposits are dominantly mass‐transport deposited blocks, as well as associated turbidites and debrites with common soft‐sediment‐deformed strata. The overlying uppermost slope succession exhibits a spectacular set of gullies, which are separated by abundant slump‐scar unconformities (tops of rotational slides), then filled with debris‐flow conglomerates and sandy turbidite beds with interbedded mudstones. The top of the study succession, on the outer‐shelf area, contains repeated upward‐coarsening, sandstone‐rich parasequences (2 to 15 m thick) with abundant hummocky and swaley cross‐stratification, clear evidence of storm‐swell and storm wave‐dominated conditions. The observations suggest reconstruction of the unstable shelf margin as follows: (i) the aggradational storm wave‐dominated, shelf‐edge delta front became unstable and collapsed down the slope; (ii) the excavated scars of the shelf margin became gullied, but gradually healed (aggraded) by repeated infilling by debris flows and turbidites, and then new gullying and further infilling; and (iii) a renewed storm wave‐dominated delta‐front prograded out across the healed outer shelf, re‐establishing the newly stabilized shelf margin. The Moruga Formation study, along with only a few others in the literature, confirms the sediment bypass ability of storm wave‐dominated reaches of shelf edges, despite river‐dominated deltas being, by far, the most efficient shelf‐edge regime for sediment bypass at the shelf break.     

Links among Slope Morphology, Canyon Types and Tectonics on Passive and Active Margins in the Northernmost South China Sea

We examine slope profile types and variations in slope gradient and slope relief with depth for both passive and active margins in the northern most South China Sea.The passive South China margin is characterized by an exponential slope profile,mainly assodated with clustered slope-confined canyons.The active Taiwan margin shows a linear-like shape with great variations along the lower slope.Fewer eanyom occur on the Taiwau margin,and hence the influence of canyon incision on slope morphology is relatively less significant.Quantitative analyses of slope curvature,slope gradleut and square root of relief variance are useful statistical parameters to explain characteristics and variability of morphology of the slope of the South China margin,but not for the Kaoping slope on the Talwan side.On the active Taiwan margin,tectonic activities are dominant over sediment deposition and surface erosion,producing a slope profile quite different from those of passive margins of the Middle Atlantic,KwaZulu-Natal,South Africa where failure on slope and accompanying canyon incision are the dominant processes shaping the slope morphology.     

Recognition of strong seasonality and climatic cyclicity in an ancient,fluvially dominated,tidally influenced point bar: Middle McMurray Formation,Lower Steepbank River,north‐eastern Alberta,Canada

Inclined heterolithic stratification in the Lower Cretaceous McMurray Formation, exposed along the Steepbank River in north‐eastern Alberta, Canada, accumulated on point bars of a 30 to 40 m deep continental‐scale river in the fluvial–marine transition. This inclined heterolithic stratification consists of two alternating lithologies, sand and fine‐grained beds. Sand beds were deposited rapidly by unidirectional currents and contain little or no bioturbation. Fine‐grained beds contain rare tidal structures, and are intensely bioturbated by low‐diversity ichnofossil assemblages. The alternations between the sand and fine‐grained beds are probably caused by strong variations in fluvial discharge; that are believed to be seasonal (probably annual) in duration. The sand beds accumulated during river floods, under fluvially dominated conditions when the water was fresh, whereas the fine‐grained beds accumulated during the late stages of the river flood and deposition continued under tidally influenced brackish‐water conditions during times of low‐river flow (i.e. the interflood periods). These changes reflect the annual migration in the positions of the tidal and salinity limits within the fluvial–marine transition that result from changes in river discharge. Sand and fine‐grained beds are cyclically organized in the studied outcrops forming metre‐scale cycles. A single metre‐scale cycle is defined by a sharp base, an upward decrease in sand‐bed thickness and upward increases in the preservation of fine‐grained beds and the intensity of bioturbation. Metre‐scale cycles are interpreted to be the product of a longer term (decadal) cyclicity in fluvial discharge, probably caused by fluctuations in ocean or solar dynamics. The volumetric dominance of river‐flood deposits within the succession suggests that accumulation occurred in a relatively landward position within the fluvial–marine transition. This study shows that careful observation can reveal much about the interplay of processes within the fluvial–marine transition, which in turn provides a powerful tool for determining the palaeo‐environmental location of a deposit within the fluvial–marine transition.     

Peatland development at the arctic tree line (Québec, Canada) influenced by flooding and permafrost

In this study, we documented the Holocene history of a peat plateau at the arctic tree line in northern Québec using stratigraphic and macrofossil analyses to highlight the effects of geomorphic setting in peatland development. Paludification of the site began about 6800 cal yr BP. From 6390 to 4120 cal yr BP, the peatland experienced a series of flooding events. The location of the peatland in a depression bounded by two small lakes likely explains its sensitivity to runoff. The proximity of a large hill bordering the peatland to the south possibly favored the inflow of mineral-laden water. The onset of permafrost aggradation in several parts of the peatland occurred after 3670 cal yr BP. Uplifting of the peatland surface caused by permafrost stopped the flooding. According to radiocarbon dating of the uppermost peat layers, permafrost distribution progressed from the east to the west of the peatland, indicating differential timing for the initiation of permafrost throughout the peatland. Most of the peatland was affected by permafrost growth during the Little Ice Age. Picea mariana macroremains at 6450 cal yr BP indicate that the species was present during the early stages of peatland development, which occurred soon after the sea regression.     

An Early Paleozoic Inter‐Platform Shelf in the Southwest of Tarim Basin,NW China and its Significance for Petroleum Exploration

An early Paleozoic inter‐platform, platform, slope and shelf succession comprised of five Cambrian to mid‐Ordovician seismic sequences, has been identified in the southwestern part of the Tarim Basin. A previously unknown, elongate shelf succession that extends from east to west transects the Taxinan area of the southwestern Tarim Basin. It was flanked by carbonate platforms and platform margins, and by peri‐platform margin slopes on its north and south sides. The Markit platform margin and slope, located along the northern side of the shelf, extended nearly linearly west to east with some headlands and embayments towards the east. The Tangnan platform margin and slope, located along the southern side of the shelf, extended southwest to northeast and was more sinuous with pronounced northwest‐directed headlands flanked by embayments. Differentiation of these settings began in earliest Cambrian time during continental breakup. Initially, broad gentle slopes flanked an open shelf seaway in Cambrian time. In Early Ordovician time, the Markit and Tangnan platform margins became more distinct and rimmed, and were flanked by slightly steeper, but still very gentle slopes. During their deposition, these platform margins and their adjoining slopes exhibited some lateral migration, with a slight overall widening of the open shelf seaway between them from Cambrian to Ordovician time. The presence of these platform margin and slope successions in the southwestern area of the Tarim basin provides another focus for petroleum exploration and discovery of additional carbonate reef‐shoal reservoirs in the Markit and Tangnan areas. The adjoining deep‐water shelf shale and mudstone shelf succession itself is an additional prospective petroleum source rock in close proximity to these potential reef‐shoal reservoirs.     

Active synsedimentary tectonism on a mixed carbonate–siliciclastic continental margin: third‐order sequence stratigraphy of a ramp to basin transition,lower Sekwi Formation,Selwyn Basin,Northwest Territories,Canada

The lower part of the Early Cambrian Sekwi Formation in the Selwyn Basin of the Northwest Territories, Canada, is composed of two regional, unconformity‐bounded sequences, S0 and S1, which record the first widespread carbonate deposition during the initial Palaeozoic transgression onto the western margin of Laurentia. These Early Cambrian sequences are unique to the western North American Cordillera, representing the only record of primarily deep‐water deposition on a tectonically active, mixed carbonate–siliciclastic ramp during this period. More specifically, the geometry of the Sekwi ramp changed during deposition of S0 and S1, from a shallowly dipping homoclinal ramp during the S0 transgressive systems tract to a steeply dipping tectonically modified ramp during the early highstand systems tract of S0. The steeply dipping ramp profile of S0 was preserved into the early transgressive systems tract of S1. The Sekwi ramp returned to a gently sloping ramp during the late highstand systems tract of S1 and remained so throughout the remainder of Sekwi deposition. The evolving shape of the Sekwi ramp is attributed to syndepositional ‘down to the basin’ faulting during deposition of both S0 and S1 and is recorded by: (i) the westward thickening, irregular geometries of S0 and S1; (ii) geographical restriction of deep‐water facies (including sediment gravity flow deposits); (iii) the presence of large allochthonous blocks; and (iv) the clast composition of sediment gravity flow deposits. Sediment gravity flow deposits play an unusually important role in the sequence stratigraphic interpretation of the lower Sekwi Formation, as they delineate depositional packages, including the maximum flooding zone, the transitions between portions of systems tracts, and the inferred locations of syntectonic extensional faults. Syntectonic faults increased accommodation basinward of an extensive ooid‐shoal complex that developed along the Sekwi ramp crest, greatly influencing sequence geometry and initiating the downslope motion of sediment gravity flows. The syndepositional faulting probably was a continuation of extension that began during the latest Neoproterozoic rifting of western Laurentia. The composition of sediment gravity flow deposits track changing accommodation space on the lower Sekwi ramp and can be used to differentiate systems tracts that probably were related more to tectonism than eustasy.     

A depositional model for a wave‐dominated open‐coast tidal flat,based on analyses of the Cambrian–Ordovician Lagarto and Palmares formations,north‐eastern Brazil

Open‐coast tidal flats are hybrid depositional systems resulting from the interaction of waves and tides. Modern examples have been recognized, but few cases have been described in ancient rock successions. An example of an ancient open‐coast tidal flat, the depositional architecture of the Lagarto and Palmares formations (Cambrian–Ordovician of the Sergipano Belt, north‐eastern Brazil) is presented here. Detailed field analyses of outcrops allowed the development of a conceptual architectural model for a coastal depositional environment that is substantially different from classical wave‐dominated or tide‐dominated coastal models. This architectural model is dominated by storm wave, low orbital velocity wave and tidal current beds, which vary in their characteristics and distribution. In a landward direction, the storm deposits decrease in abundance, dimension (thickness and spacing) and grain size, and vary from accretionary through scour and drape to anisotropic hummocky cross‐stratification beds. Low orbital wave deposits are more common in the medium and upper portion of the tidal flat. Tidal deposits, which are characterized by mudstone interbedded with sandstone strata, are dominant in the landward portion of the tidal flat. Hummocky cross‐stratification beds in the rock record are believed, in general, to represent storm deposits in palaeoenvironments below the fair‐weather wave base. However, in this model of an open‐coast tidal flat, hummocky cross‐stratification beds were found in very shallow waters above the fair‐weather wave base. Indeed, this depositional environment was characterized by: (i) fair‐weather waves and tides that lacked sufficient energy to rework the storm deposits; (ii) an absence of biological communities that could disrupt the storm deposits; and (iii) high aggradation rates linked to an active foreland basin, which contributed definitively to the rapid burial and preservation of these hummocky cross‐stratification deposits.     

Hydrothermal Mineralization on the Mesoproterozoic Passive Continental Margins of China： A Case Study of the Langshan-Zha＇ertaishan Belt, Inner Mongolia, China

Most ore-forming characteristics of the Langshan-Zha‘ertaishan hydrothermal exhalation belt, which consists of the Dongshengmiao, Huogeqi, Tanyaokou and Jiashengpan large-superlarge Zn-Pb-Cu-Fe sulfide deposits, are most similar to those of Mesoproterozoic SEDEX-type provinces of the world. The characteristics include: (1) All deposits of this type in the belt occur in third-order fault-basins in the Langshan-Zha‘ertaishan aulacogen along the northern margin of the North China Platform; (2) these deposits with all their orebodies hosted in the Mesoproterozoic impure dolomite-marble and carbonaceous phyllite (or schists) have an apparent stratabound nature; ores display laminated and banded structures, showing clear depositional features; (3) there is some evidence of syn-sedimentary faulting, which to a certain extent accounts for the temporal and spatial distribution and the size of the orebodies in all deposits and the formation of intrabed conglomerates and breccias; (4) they show lateral and vertical zonation of sulfides; (5) The Cu/(Pb Zn Cu) ratio of the large and thick Pb Zn Cu orebodies gradually decreases from bottom to top; and (6) barite is interbedded with pyrites and sometimes with sphalerite. However, some characteristics such as the Co/Ni radio of the pyrites, the volcanism, for example, of the Langshan-Zha‘ertalshan metallogenic belt, are different from those of the typical SEDEX deposits of the world. The meta-basic volcanic rock in Huogeqi, the sodic bimodal volcanic rocks in the Dongshengmiao and potassic bimodal-volcanic rocks with blastoporphyfitic and blasto-glomeroporphyritic texture as well as blasto-amygdaloidal structure in the Tanyaokou deposits have been discovered in the only ore-bearing second formation of the Langshan Group in the past 10 years. The metallogeny of some deposits hosted in the Langshan Group is closely related to syn-sedimentary volcanism based on the following facts: most of the lead isotopes in sphalerite, galena, pyrite, pyrrhotite and chalcopyrite plot on both sides of the line for the mantle or between the lines for the mantle and lower crust in the lead isotope composition diagram; cobalt content of some pyrites samples is much higher than the nickel content (Co/Ni= 11.91-12.19). Some volcanic blocks and debris have been picked out from some pyritic and pyrrhotitic ores. All Zn-Pb-Cu-Fe sulfide orebodies in these deposits occur in the strata overlying metamorphic volcanic rocks in the only ore-bearing second formation. In the Jiashengpan deposit that lacks syn-sedimentary volcanic rocks in the host succession only Pb and Zn ores occur without Cu ore, but in the Dongshengmiao, Tanyaokou and Huogeqi deposits with syn-sedimentary volcanic rocks in the host succession Cu ores occur. This indicates a relatively higher ore-forming temperature. The process of synsedimentary volcanic eruption directly supplied some ore-forming elements, and resulted in secular geothermal anomaly favorable for the circulation of a submarine convective hydrothermal system, which accounts for the precipitation of deep mineralizing fluids exhaling into anoxidic basins along the syn-sedimentary fault system in the Langshan-Zha‘ertai rift. The Dongshengmiao, Tanyaokou, and Huogeqi deposits hosted in the Langshan Group appear to be a transitional type of mineral deposit between SEDEX and VMS-types but with a bias towards SEDEX, while the Jiashengpan deposit hosted in the Zha‘ertai Group is of a characteristic SEDEX type. This evidence, together with other new discoveries of Mesoproterozoic volcanic rocks and the features of lithogeny and metallogeny of the Bayun Obo deposit in the neighborhood emphasize the diversity, complexity and uniqueness of the Mesoproterozoic Langshan-Zha‘ertal-Bayun Obo ore belt.     

Geochronology and fluid source constraints of the Songligou gold‐telluride deposit,western Henan Province,China: Analysis of genetic implications

The Songligou gold‐telluride deposit, located in Songxian County, western Henan Province, China, is one of many gold‐telluride deposits in the Xiaoqinling‐Xiong'ershan district. Gold orebodies occur within the Taihua Supergroup and are controlled by the WNW F101 Fault, and the fault was cut across by a granite porphyry dike. Common minerals in gold orebodies include quartz, chlorite, epidote, K‐feldspar, calcite, fluorite, sericite, phlogopite, bastnasite, pyrite, galena, chalcopyrite, sphalerite, tellurides, gold, bismuthinite, magnetite, and hematite, and pyrite is the dominant sulfide. Four mineralization stages are recognized, including pyrite‐quartz stage (I), quartz‐pyrite stage (II), gold‐telluride stage (III), and quartz‐calcite stage (IV). This work reports the Rb–Sr age of gold‐telluride‐bearing pyrite and zircon U–Pb age of granite porphyry, as well as S isotope data of pyrite and galena. The pyrite Rb–Sr isochron age is 126.6 ± 2.3 Ma (MSWD = 1.8), and the average zircon U–Pb age of granite porphyry is 166.8 ± 4.1 Ma (MSWD = 4.9). (⁸⁷Sr/⁸⁶Sr) _i values of pyrite and δ³⁴S values of sulfides vary from 0.7104 to 0.7105 and ?11.84 to 0.28‰, respectively. The obtained Rb–Sr isochron age represents the ore formation age of the Songligou gold‐telluride deposit, which is much younger than the zircon U–Pb age of the granite porphyry. Strontium and S isotopes, together with the presence of bastnaesite, suggest that the ore‐forming fluid was derived from felsic magmas with input of a mantle component and subsequently interacted with the Taihua Supergroup. Tellurium was derived from metasomatized mantle and was related to the subduction of the Shangdan oceanic crust and Izanagi plate beneath the North China Craton (NCC). This deposit is a part of the Early Cretaceous large‐scale gold mineralization in east NCC and formed in an extensional tectonic setting.     

Overprinting porphyry‐type veinlets on the intrusive rocks and phreatomagmatic breccias in the Southwest prospect,southwestern Sto. Tomas II (Philex), Baguio District,Philippines

The Southwest prospect is located at the southwestern periphery of the Sto. Tomas II porphyry copper–gold deposit in the Baguio District, northwestern Luzon, Philippines. The Southwest prospect hosts a copper‐gold mineralization related to a complex of porphyry intrusions, breccia facies, and overlapping porphyry‐type veinlets emplaced within the basement Pugo metavolcanics rocks and conglomerates of the Zigzag Formation. The occurrences of porphyry‐type veinlets and potassic alteration hosted in the complex are thought to be indications of the presence of blind porphyry deposits within the Sto. Tomas II vicinity. The complex is composed of at least four broadly mineralogically similar dioritic intrusive rocks that vary in texture and alteration type and intensity. These intrusions were accompanied with at least five breccia facies that were formed by the explosive brecciation, induced by the magmatic–hydrothermal processes and phreatomagmatic activities during the emplacement of the various intrusions. Hydrothermal alteration assemblages consisting of potassic, chlorite–magnetite, propylitic and sericite–chlorite alteration, and contemporaneous veinlet types were developed on the host rocks. Elevated copper and gold grades correspond to (a) chalcopyrite–bornite assemblage in the potassic alteration in the syn‐mineralization early‐mineralization diorite (EMD) and contemporaneous veinlets and (b) chalcopyrite‐rich mineralization associated with the chalcopyrite–magnetite–chlorite–actinolite±sericite veinlets contemporaneous with the chlorite–magnetite alteration. Erratic remarkable concentrations of gold were also present in the late‐mineralization Late Diorite (LD). High X_Mg of calcic amphiboles (>0.60) in the intrusive rocks indicate that the magmas have been oxidizing since the early stages of crystallization, while a gap in the composition of Al between the rim and the cores of the calcic amphiboles in the EMD and LD indicate decompression at some point during the crystallization of these intrusive rocks. Fluid inclusion microthermometry suggests the trapping of immiscible fluids that formed the potassic alteration, associated ore mineralization, and sheeted quartz veinlets. The corresponding formation conditions of the shallower and deeper quartz veinlets were estimated at pressures of 50 and 30 MPa and temperatures of 554 and 436°C at depths of 1.9 and 1.1 km. Temperature data from the chlorite indicate that the chalcopyrite‐rich mineralization associated with the chlorite–magnetite alteration was formed at a much lower temperature (ca. 290°C) than the potassic alteration. Evidence from the vein offsetting matrix suggests multiple intrusions within the EMD, despite the K‐Ar ages of the potassic alteration in EMD and hornblende in the LD of about the same age at 3.5 ± 0.3 Ma. The K‐Ar age of the potassic alteration was likely to be thermally reset as a result of the overprinting hydrothermal alteration. The constrained K‐Ar ages also indicate earlier formed intrusive rocks in the Southwest prospect, possibly coeval to the earliest “dark diorite” intrusion in the Sto. Tomas II deposit. In addition, the range of δ³⁴S of sulfide minerals from +1.8‰ to +5.1‰ in the Southwest prospect closely overlaps with the rest of the porphyry copper and epithermal deposits in the Sto. Tomas II deposit and its vicinity. This indicates that the sulfides may have formed from a homogeneous source of the porphyry copper deposits and epithermal deposits in the Sto. Tomas II orebody and its vicinity. The evidence presented in this work proves that the porphyry copper‐type veinlets and the adjacent potassic alteration in the Southwest prospect are formed earlier and at a shallower level in contrast with the other porphyry deposits in the Baguio District.