High-resolution structures of the Landers fault zone inferred from aftershock waveform data

High-frequency body waves recorded by a temporary seismic array across the surface rupture trace of the 1992 Landers, California, earthquake were used to determine fault-zone structures down to the seismogenic depth. We first developed a technique to use generalized ray theory to compute synthetic seismograms for arbitrarily oriented tabular low-velocity fault-zone models. We then generated synthetic waveform record sections of a linear array across a vertical fault zone. They show that both arrival times and waveforms of P and S waves vary systematically across the fault due to transmissions and reflections from boundaries of the low-velocity fault zone. The waveform characteristics and arrival-time patterns in the record sections allow us to locate the boundaries of the fault zone and to determine its P - and S -wave velocities independently as well as its depth extent. Therefore, the trade-off between the fault-zone width and velocities can be avoided. Applying the method to the Landers waveform data reveals a low-velocity zone with a width of 270–360 m and a 35–60 per cent reduction in P and S velocities relative to the host rock. The analysis suggests that the low-velocity zone extends to a depth of ∼7 km. The western boundary of the low-velocity zone coincides with the observed main surface rupture trace.     

Slip rate on the Dead Sea transform fault in northern Araba valley (Jordan)

The Araba valley lies between the southern tip of the Dead Sea and the Gulf of Aqaba. This depression, blanketed with alluvial and lacustrine deposits, is cut along its entire length by the Dead Sea fault. In many places the fault is well defined by scarps, and evidence for left-lateral strike-slip faulting is abundant. The slip rate on the fault can be constrained from dated geomorphic features displaced by the fault. A large fan at the mouth of Wadi Dahal has been displaced by about 500 m since the bulk of the fanglomerates were deposited 77–140 kyr ago, as dated from cosmogenic isotope analysis (¹⁰Be in chert) of pebbles collected on the fan surface and from the age of transgressive lacustrine sediments capping the fan. Holocene alluvial surfaces are also clearly offset. By correlation with similar surfaces along the Dead Sea lake margin, we propose a chronology for their emplacement. Taken together, our observations suggest an average slip rate over the Late Pleistocene of between 2 and 6 mm yr⁻¹, with a preferred value of 4 mm yr⁻¹. This slip rate is shown to be consistent with other constraints on the kinematics of the Arabian plate, assuming a rotation rate of about 0.396° Myr⁻¹ around a pole at 31.1°N, 26.7°E relative to Africa.     

Late Quaternary kinematics of the Pallatanga strike-slip fault (Central Ecuador) from topographic measurements of displaced morphological features

The northeast-trending Pallatanga right-lateral strike-slip fault runs across the Western Cordillera connecting N50E-N70E trending normal faults in the Gulf of Guayaquil with N-S reverse faults in the Interandean Depression. Over most of its length, the fault trace has been partly obscured by erosional processes and can be inferred in the topography only at the large scale. Only the northern fault segment, which follows the upper Rio Pangor valley at elevations above 3600 m, is prominent in the morphology. Valleys and ridges cut and offset by the fault provide an outstanding record of right-lateral cumulative fault displacement. The fault geometry and kinematics of this particular fault segment can be determined from detailed topographic levellings. The fault strikes N30E and dips 75 to the NW. Depending on their size and nature, transverse morphological features such as tributaries of the Rio Pangor and intervening ridges, reveal right-lateral offsets which cluster around 27 ± 11m, 41.5 ± 4 m, 590 ± 65 m and 960 ± 70 m. The slip vector deduced from the short-term offsets shows a slight reverse component with a pitch of about 11.5 SW. The 41.5 ± 4 m displacements are assumed to be coeval with the last glacial termination, yielding a mean Holocene slip-rate of 2.9- 4.6 mm yr⁻¹. Assuming a uniform slip rate on the fault in the long term, the 27 m offset appears to correlate with an identified middle Holocene morphoclimatic event, and the long term offsets of 590 m and 960 m coincide with the glacial terminations at the beginning of the last two interglacial periods.     

Mechanics of normal fault networks subject to slip-weakening friction

We seek to understand how the stress interactions and the slip-weakening process combine within a non-coplanar, normal fault network to allow a slip instability to develop, and shape the final slip distribution on the system. In a first part, we perform a non-linear spectral analysis to investigate the conditions of stability and the process of slip initiation in an antiplane non-coplanar fault system subject to a slip-dependent friction law. That numerical model allows determining the zones that are able to slip within a fault network, as well as the location of the stress singularities. The resulting slip profiles on the faults show only a few different shapes, some of them with long, linear sections. This leads to formulate a general classification of slip profiles that can be used to infer the degree of fault interaction within any non-coplanar system. In a second part of work, we use our modelling to try reproducing the cumulative slip profiles measured on three real normal interacting faults forming a large-scale en echelon system. For that, we assume that cumulative slip profiles can be compared to the first static modal solution of our conceptual model. We succeed reproducing the profiles quite well using a variable weakening along the faults. Overall, the weakening rate decreases in the direction of propagation of the fault system. Yet, modelling the slip along the propagating, isolated termination segment of the system requires an unlikely distribution of weakening. This suggests that factors not considered in our analysis may contribute to slip profile shaping on isolated, propagating faults.     

Dynamic nucleation process of shallow earthquake faulting in a fault zone

Two distinct phases are commonly observed at the initial part of seismograms of large shallow earthquakes: low-frequency and low-amplitude waves following the onset of a P wave ( P ₁) are interrupted by the arrival of the second impulsive phase P₂ enriched with high-frequency components. This observation suggests that a large shallow earthquake involves two qualitatively different stages of rupture at its nucleation.
We propose a theoretical model that can naturally explain the above nucleation behaviour. The model is 2-D and the deformation is assumed to be anti-plane. A key clement in our model is the assumption of a zone in which numbers of pre-existing cracks are densely distributed; this cracked zone is a model for the fault zone. Dynamic crack growth nucleated in such a zone is intensely affected by the crack interactions, which exert two conflicting effects: one tends to accelerate the crack growth, and the other tends to decelerate it. The accelerating and decelerating effects are generally ascribable to coplanar and non-coplanar crack interactions, respectively. We rigorously treat the multiple interactions among the cracks, using the boundary integral equation method (BIEM), and assume the critical stress fracture criterion for the analysis of spontaneous crack propagation.
Our analysis shows that a dynamic rupture nucleated in the cracked zone begins to grow slowly due to the relative predominance of non-coplanar interactions. This process radiates the P₁ phase. If the crack continues to grow, coalescence with adjacent coplanar cracks occurs after a short time. Then, coplanar interactions suddenly begin to prevail and crack growth is accelerated; the P₂ phase is emitted in this process. It is interpreted that the two distinct phases appear in the process of the transition from non-coplanar to coplanar interaction predominance.