Late Cenozoic geological development of the south Vøring margin,mid-Norway

Late Cenozoic seismic stratigraphy of the Vøring continental margin has been studied in detail, with emphasis on the geological development of the Naust Formation deposited during the last 3 million years. The Kai Formation (15–3 Ma) comprises mainly biogenic ooze deposited in the Møre and Vøring Basins. In Naust time, there was a marked increase in supply of sediments from the inner shelf areas and the western part of the Scandinavian mountain range, and glaciers expanded to the shelf and reached the shelf edge several times during the last 1.5–2 million years. During early to mid Naust time the shelf was widened by westerly prograding sediment units, but for a long period the shallowest part of the Helland-Hansen Arch (HHA) formed a barrier preventing glacially derived debris from being distributed farther west. West of the HHA, mainly stratified marine and glacimarine sediments were deposited. A substantial part of these sediments were transported by the north-flowing Norwegian Atlantic Current, which redistributed suspended particles from ice streams, rivers, coastal erosion and seabed winnowing. After burial of the crest of the HHA at c. 0.5 Ma, glacial debris and slide deposits were also deposited west of this high. In the north, massive units of glacial debris were distributed beyond the crest of the HHA, also in mid Naust time, thinning westwards and interfingering with fine-grained sediments on the lower slope. The Sklinnadjupet Slide, inferred to be c. 250,000 years old, corresponds in age with an earlier huge slide in the Storegga area. An elongated area of uneven seabed topography previously interpreted as diapirs (Vigrid diapirs) on the slope west of the HHA is shown to be formed by ooze eruption from the crest of the arch and submarine sliding.     

‘Bulls-eye’ pockmarks and polygonal faulting in the Lower Congo Basin: Relative timing and implications for fluid expulsion during shallow burial

This study describes a new type of pockmark association from the Lower Congo Basin offshore West Africa, consisting of up to 8 stacked paleopockmarks separated by intervals of drape and onlap fill. The stacked paleopockmarks occur within the depocentres of polygonally-faulted Plio-Pleistocene sediments and are distributed evenly in the downslope parts of two salt mini-basins. The majority of the stacked pockmarks initiated synchronously in the late Pliocene (~ 3 Ma) with a subordinate initiation phase in the mid Pliocene (~ 4 Ma). The primary agents in pockmark formation are interpreted to be pore water expelled during early-stage compaction together with biogenic methane. Bottom simulating reflections (BSRs) associated with free gas overlain by gas hydrates are currently found in the area. It is speculated that biogenic methane accumulated within and below a clathrate cap, which was repeatedly breached, forming pockmarks at discrete horizons separated by intervals of draping sedimentation. The mid and late Pliocene pockmark initiations appear to coincide with sea-level falls following periods of relatively stable highstand conditions. Several subsequent pockmark horizons may similarly correlate with subsequent sea-level falls during the late Pliocene and early Pleistocene. The stacked paleopockmarks are completely surrounded by polygonal faults and consistently occur within polygonal fault cells that crosscut the succession containing the stacked pockmarks. Early-stage compaction and dewatering of the Pliocene sediments thus preceded polygonal faulting, providing a constraint on the conditions leading to polygonal faulting of the fine-grained host sediments. The relationship documented here is interpreted as due to the presence of a hydrate cap in the Plio-Pleistocene mini-basins which may have retarded the normal compaction processes and facilitated pockmark formation by allowing the build up of gas hydrate and free gas in the basin centres. The relative timing and spatial relationships implies that fluids expelled due to polygonal faulting were not implicated in pockmark formation in this area.     

Gas hydrate formation in compressional,extensional and un-faulted structural settings – Examples from New Zealand's Hikurangi margin

We investigate gas hydrate formation processes in compressional, extensional and un-faulted settings on New Zealand's Hikurangi margin using seismic reflection data. The compressional setting is characterized by a prominent subduction wedge thrust fault that terminates beneath the base of gas hydrate stability, as determined from a bottom-simulating reflection (BSR). The thrust is surrounded by steeply dipping strata that cross the BSR at a high angle. Above the BSR, these strata are associated with a high velocity anomaly that is likely indicative of relatively concentrated, and broadly distributed, gas hydrates. The un-faulted setting—sedimentary infill of a slope basin on the landward side of a prominent thrust ridge—is characterized by a strong BSR, a thick underlying free gas zone, and short positive polarity reflection segments that extend upward from the BSR. We interpret the short reflection segments as the manifestation of gas hydrates within relatively coarse-grained sediments. The extensional setting is a localized, shallow response to flexural bending of strata within an anticline. Gas has accumulated beneath the BSR in the apex of folding. A high-velocity zone directly above the BSR is probably mostly lithologically-derived, and only partly related to gas hydrates. Although each setting shows evidence for focused gas migration into the gas hydrate stability zone, we interpret that the compressional tectonic setting is most likely to contain concentrated gas hydrates over a broad region. Indeed, it is the only setting associated with a deep-reaching fault, meaning it is the most likely of the three settings to have thermogenic gas contributing to hydrate formation. Our results highlight the importance of anisotropic permeability in layered sediments and the role this plays in directing sub-surface fluid flow, and ultimately in the distribution of gas hydrate. Each of the three settings we describe would warrant further investigation in any future consideration of gas hydrates as an energy resource on the Hikurangi margin.     

Seismic Insights into Bottom Simulating Reflection (BSR) in the Krishna-Godavari Basin,Eastern Margin of India

The multichannel seismic data along one long-offset survey line from Krishna-Godavari (K-G) basin in the eastern margin of India were analyzed to define the seismic character of the gas hydrate/free gas bearing sediments. The discontinuous nature of bottom simulating reflection (BSR) was carefully examined. The presence of active faults and possible upward fluid circulation explain the discontinuous nature and low amplitude of the BSR. The study reveals free gas below gas hydrates, which is also indicated by enhancement of seismic amplitudes with offsets from BSR. These findings were characterized by computing seismic attributes such as the reflection strength and instantaneous frequency along the line. Geothermal gradients were computed for 18°C and 20°C temperature at the depth of BSR to understand the geothermal anomaly that can explain the dispersed nature of BSR. The estimated geothermal gradient shows an increase from 32°C/km in the slope region to 41°C/km in the deeper part, where free gas is present. The ray-based travel time inversion of identifiable reflected phases was also carried out along the line. The result of velocity tomography delineates the high-velocity (1.85–2.0 km/s) gas hydrate bearing sediments and low-velocity (1.45–1.5 km/s) free gas bearing sediments across the BSR.     

Structural controls on the formation of BSR over a diapiric anticline from a dense MCS survey offshore southwestern Taiwan

A dense seismic reflection survey with up to 250-m line-spacing has been conducted in a 15 × 15 km wide area offshore southwestern Taiwan where Bottom Simulating Reflector is highly concentrated and geochemical signals for the presence of gas hydrate are strong. A complex interplay between north–south trending thrust faults and northwest–southeast oblique ramps exists in this region, leading to the formation of 3 plunging anticlines arranged in a relay pattern. Landward in the slope basin, a north–south trending diapiric fold, accompanied by bright reflections and numerous diffractions on the seismic profiles, extends across the entire survey area. This fold is bounded to the west by a minor east-verging back-thrust and assumes a symmetric shape, except at the northern and southern edges of this area, where it actively overrides the anticlines along a west-verging thrust, forming a duplex structure. A clear BSR is observed along 67% of the acquired profiles. The BSR is almost continuous in the slope basin but poorly imaged near the crest of the anticlines. Local geothermal gradient values estimated from BSR sub-bottom depths are low along the western limb and crest of the anticlines ranging from 40 to 50 °C/km, increase toward 50–60 °C/km in the slope basin and 55–65 °C/km along the diapiric fold, and reach maximum values of 70 °C/km at the southern tip of the Good Weather Ridge. Furthermore, the local dips of BSR and sedimentary strata that crosscut the BSR at intersections of any 2 seismic profiles have been computed. The stratigraphic dips indicated a dominant east–west shortening in the study area, but strata near the crest of the plunging anticlines generally strike to southwest almost perpendicular to the direction of plate convergence. The intensity of the estimated bedding-guided fluid and gas flux into the hydrate stability zone is weaker than 2 in the slope basin and the south-central half of the diapiric fold, increases to 7 in the northern half of the diapiric fold and plunging anticlines, and reaches a maximum of 16 at the western frontal thrust system. Rapid sedimentation, active tectonics and fluid migration paths with significant dissolved gas content impact on the mechanism for BSR formation and gas hydrate accumulation. As we begin to integrate the results from these studies, we are able to outline the regional variations, and discuss the importance of structural controls in the mechanisms leading to the gas hydrate emplacements.     

南海北部神狐海域天然气水合物分布的主控因素

针对天然气水合物沉积成矿因素不明确等问题,通过利用南海北部神狐海域的高分辨率三维地震、测井和岩心等资料,对晚中新世以来的地层进行了高分辨率层序划分和精细的沉积解释。从温压、沉积、构造等方面探讨了神狐海域天然气水合物分布的主控因素,认为：BSR上部附近处于水合物稳定温压范围内;粗粒沉积物有利于天然气水合物的富集;在含水合物层段内,孔隙度与天然气水合物饱合度成正比关系;滑塌体是天然气水合物赋存的有利相带;气烟囱形成过程中产生的断裂系统可为富含甲烷流体向上运移提供通道,并在其上部滑塌体富集成矿。因此,神狐海域具备天然气水合物成藏的优越条件,是天然气水合物勘探开发的有利区块。     

Structural controls on the formation of BSR over a diapiric anticline from a dense MCS survey offshore southwestern Taiwan

A dense seismic reflection survey with up to 250-m line-spacing has been conducted in a 15 × 15 km wide area offshore southwestern Taiwan where Bottom Simulating Reflector is highly concentrated and geochemical signals for the presence of gas hydrate are strong. A complex interplay between north–south trending thrust faults and northwest–southeast oblique ramps exists in this region, leading to the formation of 3 plunging anticlines arranged in a relay pattern. Landward in the slope basin, a north–south trending diapiric fold, accompanied by bright reflections and numerous diffractions on the seismic profiles, extends across the entire survey area. This fold is bounded to the west by a minor east-verging back-thrust and assumes a symmetric shape, except at the northern and southern edges of this area, where it actively overrides the anticlines along a west-verging thrust, forming a duplex structure. A clear BSR is observed along 67% of the acquired profiles. The BSR is almost continuous in the slope basin but poorly imaged near the crest of the anticlines. Local geothermal gradient values estimated from BSR sub-bottom depths are low along the western limb and crest of the anticlines ranging from 40 to 50 °C/km, increase toward 50–60 °C/km in the slope basin and 55–65 °C/km along the diapiric fold, and reach maximum values of 70 °C/km at the southern tip of the Good Weather Ridge. Furthermore, the local dips of BSR and sedimentary strata that crosscut the BSR at intersections of any 2 seismic profiles have been computed. The stratigraphic dips indicated a dominant east–west shortening in the study area, but strata near the crest of the plunging anticlines generally strike to southwest almost perpendicular to the direction of plate convergence. The intensity of the estimated bedding-guided fluid and gas flux into the hydrate stability zone is weaker than 2 in the slope basin and the south-central half of the diapiric fold, increases to 7 in the northern half of the diapiric fold and plunging anticlines, and reaches a maximum of 16 at the western frontal thrust system. Rapid sedimentation, active tectonics and fluid migration paths with significant dissolved gas content impact on the mechanism for BSR formation and gas hydrate accumulation. As we begin to integrate the results from these studies, we are able to outline the regional variations, and discuss the importance of structural controls in the mechanisms leading to the gas hydrate emplacements.     

Variability of the bottom-simulating reflector (BSR) and its association with tectonic structures in the Chilean margin between Arauco Gulf (37°S) and Valdivia (40°S)

Multichannel seismic reflection data recorded between Arauco Gulf (37°S) and Valdivia (40°S), on the Chilean continental margin, were processed and modeled to obtain seismic images and sub-surface models, in order to characterize the variability of the bottom-simulating reflector (BSR), which is a geophysical marker for the presence of gas hydrates. The BSR is discontinuous and interrupted by submarine valleys, canyons, as well as by faults or fractures. The BSR occurrence is more common south of Mocha Island due to moderate slopes and greater organic matter contribution by rivers in that area. Tectonic uplift and structural instability change the stability gas hydrate zone and consequently the BSR position, creating in some cases missing or double BSRs. Our modeling supports the presence of gas hydrate above the BSR and free gas below it. Higher BSR amplitudes support higher hydrate or free gas concentrations. In the study area, gas hydrate concentration is low (an average of 3.5%) suggesting disseminated gas hydrate distribution within the sediments. Also higher BSR amplitudes are associated with thrust faults in the accretionary prism, which serve as conduits for gas flow from deeper levels. This extra gas supply produces a wider thickness of gas hydrates or free gas.     

Fluid migration directions inferred from gradient of time surfaces of the sub seabed

The role of sub seabed topographically controlled fluid migration is assessed to improve our understanding of distributions of acoustic chimneys at the Nyegga pockmark field on the mid-Norwegian continental margin. 3D seismic data interpretations resulted in topographic gradients of seismic time surfaces and RMS amplitude maps. Topographical gradient maps and flow tracing allowed identifying migration pathways and trapping locations for free gas within the shallow sub seabed. The occurrence of acoustic chimneys, pockmarks and mounds correlate with identified fluid migration pathways and gas trapping locations. An important factor that controls the trapping locations and the lateral distribution of seeps on the seabed at Nyegga is the variation through time of the depth of the base of the gas hydrate stability zone (BGHSZ). Fluids can derive from gas hydrate systems that are suspected of being a biogenic source and/or Tertiary domes that are considered to show leakage of thermogenic fluids to the shallow geosphere.     

Fossilisation of a silica diagenesis reaction front on the mid-Norwegian margin

The diagenetic transformation of biogenic silica from opal-A to opal-CT was recognised on seismic reflection data over an area of 78 × 10³ km² on the mid-Norwegian margin. The opal-A/CT diagenetic boundary appears as a positive, high amplitude reflection that generally cross-cuts the hosting stratigraphy. We demonstrate that it is not a sea bottom simulating reflection (BSR) and also that is not in thermal equilibrium with the present day isotherms. We present arguments that three styles of deformation associated with the opal-A/CT reflection – polygonal faulting, regional anticlines and synclines and differential compaction folding – indicate that the silica diagenesis reaction front is fossilised at a regional scale. Isochore maps demonstrate the degree of conformity between the opal-A/CT reflection and three seismic horizons of Late Miocene to Early Pliocene age that potentially represent the paleo-seabed when ‘fossilisation’ of the reaction front took place. The seismic interpretational criteria for recognition of a fossilised diagenetic front are evaluated and the results of our study are integrated with previous studies from other basins of the NE Atlantic in order to determine if the arrest of silica diagenesis was diachronous along this continental margin.     

Seismic facies and specific character of the bottom simulating reflector on the western margin of Paramushir Island,Sea of Okhotsk

Seismic profiles from a venting area on the western margin of Paramushir Island (Sea of Okhotsk) reveal a local complex structure and an interesting, unusual pattern of the bottom simulating reflector (BSR). The BSR is gradual rising towards the venting area. The geothermal gradient and the bottom temperature confirmed the methane hydrate. The temperature appears to be the most important factor controlling the hydrate stability. A locally higher heat flow caused the upward migration of the hydrate stability field and the subsequent degradation of the hydrated sediments, causing gas vent formation and the flux of methane gas into the water column.     

Seismic velocities on the Nova Scotian margin to estimate gas hydrate and free gas concentrations

This article provides new constraints on gas hydrate and free gas concentrations in the sediments at the margin off Nova Scotia. Two-dimensional (2-D) velocity models were constructed through simultaneous travel-time inversion of ocean-bottom seismometer (OBS) data and 2-D single-channel seismic (SCS) data acquired in two surveys, in 2004 and 2006. The surveys, separated by ∼5 km, were carried out in regions where the bottom-simulating reflection (BSR) was identified in seismic reflection datasets from earlier studies and address the question of whether the BSR is a good indicator of significant gas hydrate on the Scotian margin. For both datasets, velocity increases by 200–300 m/s at a depth of approximately 220 m below seafloor (mbsf), but the results of the 2006 survey show a smaller velocity decrease (50–80 m/s) at the base of this high-velocity layer (310–330 mbsf) than the results of the 2004 survey (130 m/s). When converted to gas hydrate concentrations using effective medium theory, the 2-D velocity models for both datasets show a gas hydrate layer of ∼100 m thickness above the identified BSR. Gas hydrate concentrations are estimated at approximately 2–10% for the 2006 data and 8–18% for the 2004 survey. The reduction in gas hydrate concentration relative to the distance from the Mohican Channel structure is most likely related to the low porosity within the mud-dominant sediment at the depth of the BSR. Free gas concentrations were calculated to be 1–2% of the sediment pore space for both datasets.     

Lower crustal seismic velocity-anomalies; magmatic underplating or serpentinized peridotite? Evidence from the Vøring Margin,NE Atlantic

On the Vøring volcanic passive margin offshore mid-Norway, NE Atlantic, a lower crustal body with P-wave velocities in the range of 7.1–7.7 km/s has been mapped by twenty two-dimensional Ocean Bottom Seismograph (OBS) profiles. The main aim of the present paper is to evaluate to what extent the lower crust is consistent with magmatic intrusions or serpentinized peridotite. The relatively low V _p/V _s ratios of 1.75–1.78 modelled for the lower crust under the continental part of the Vøring Plateau are consistent with mafic intrusions mixed with blocks of stretched continental crust, but not with the presence of partially serpentinized peridotites. The lower crustal high-velocity body is restricted to the area of the Late Cretaceous/Early Tertiary rift that lead to continental break-up in Early Eocene. The same model can explain the observations in the northern Vøring Basin, but in the central and southern Vøring Basin the seismic velocities do not preclude a model involving serpentinized peridotite in addition to intrusions and continental remnants. On the west Iberia non-volcanic margin a similar layer is interpreted as serpentinized peridotite. The existence of Moho reflections, the observation of S-wave anisotropy but absence of P-wave anisotropy, uncertainties regarding supply of water to allow for significant serpentinization and very low stretching factors compared with the west Iberia Margin, are among factors that argue against the presence of serpentinized peridotite in the Vøring Basin.     

海底天然气水合物的地震资料处理与分析

介绍了利用多道反射地震资料，采用反射振幅随炮检距变化AVO（Ampltude versus Offset)技术和其他地震正、反演方法，通过研究地震剖面上的拟海底反射层（BSR）分布、地震弹性参数特征，来探讨BSR上、下方含天然气水合物沉积层和含游离气沉积层的内部结构和某些主要物理性质，如沉积物的空隙率、天然气水合物的饱和度等，由此来评估海底天然气水合物的资源前景并研究其成矿机制。     

Late Cretaceous-Paleocene extension on the Vøring Volcanic Margin

High-quality seismic data document a Maastrichtian-Paleocene rift episode on the Vøring margin lasting for 20 m.y. prior to continental breakup. The rift structures are well imaged in the Fenris Graben and Gjallar Ridge region in the western Vøring Basin, and are characterized by low-angle detachment faults with variable fault geometries from south to north. The structural restoration has facilitated the division of pre- and syn-rift sediments across the extensional terrain, which is subsequently used to evaluate mode and mechanism for the lithospheric deformation. Extension estimates based on the structural restoration, subsidence analysis and crustal thickness evaluations yield stretching factors ranging between 1.5 to 2.3 across the main fault zone just landward of the early Tertiary flood basalts. The structural restoration also shows that a middle crustal dome structure, observed beneath the low-angle faults, can be explained by extensional unroofing. Thus, the dome structure may represent a possible metamorphic core complex. Calculations of the effects on vertical motion, assuming uniform and two-layer differential stretching models combined with the arrival of the Iceland mantle plume during rifting, indicate that the uniform extension model may account for both observed early rift subsidence and subsequent late rift uplift and erosion. Although the differential model can not be excluded, it implies early rift uplift which is not compatible with our seismic interpretation. The direct and indirect effects of the Iceland mantle plume may have caused as much as 1.2 km of late rift uplift. Comparison of the volcanic Vøring margin and the non-volcanic West Iberian margin shows similarities in terms of structural style as well as in mode and distribution of extension.     

Analysis of shallow gas and fluid migration within the Plio-Pleistocene sedimentary succession of the SW Barents Sea continental margin using 3D seismic data

Three-dimensional (3D) seismic data acquired for hydrocarbon exploration reveal that gas accumulations are common within the 2–3 km thick Plio-Pleistocene stratigraphic column of the south-western Barents Sea continental margin. The 3D seismic data have relatively low-frequency content (<40 Hz) but, due to dense spatial sampling, long source-receiver offsets, 3D migration and advanced interpretation techniques, they provide surprisingly detailed images of inferred gas accumulations and the sedimentary environments in which they occur. The presence of gas is inferred from seismic reflection segments with anomalously high amplitude and reversed phase, compared with the seafloor reflection, so-called bright spots. Fluid migration is inferred from vertical zones of acoustic masking and acoustic pipes. The 3D seismic volume allows a spatial analysis of amplitude anomalies inferred to reflect the presence of gas and fluids. At several locations, seismic attribute maps reveal detailed images of flat spots, inferred to represent gas–water interfaces. The data indicate a focused fluid migration system, where sub-vertical faults and zones of highly fractured sediments are conduits for the migration of gas-bearing fluids in Plio-Pleistocene sediments. Gas is interpreted to appear in high-porosity fan-shaped sediment lobes, channel and delta deposits, glacigenic debris flows and sediment blocks, probably sealed by low-permeability, clayey till and/or (glacio)marine sediments. Gas and fluid flow are here attributed mainly to rapid Plio-Pleistocene sedimentation that loaded large amounts of sedimentary material over lower-density, fine-grained Eocene oozes. This probably caused pore-fluid dewatering of the high-fluid content oozes through a network of polygonal faults. The study area is suggested to have experienced cycles of fluid expulsion and hydrocarbon migration associated with glacial–interglacial cycles.     

Amplitude-versus-offset modeling of the bottom simulating reflection associated with submarine gas hydrates

Velocity analysis of multi-channel seismic (MCS) data and amplitude-versus-offset (AVO) modeling provides an efficient way of identifying gas hydrate and free gas, and therefore the nature of the bottom-simulating reflector (BSR). Additionally, AVO modeling also yields estimates of the hydrate concentration and free gas saturation across the BSR in terms of velocity distribution. In the present study, we apply directivity correction in order to accentuate the AVO behavior. Modeling for AVO pattern of the observed BSR over the Kerala–Konkan Offshore Basin may provide the probable velocity distribution across the BSR and thereby infer whether hydrate or hydrate/free gas model governs the AVO observations. Initial results indicate the possible presence of free gas underlying the gas hydrates-saturated sediments in this region.     

Reflectivity template,a quantitative intercept-gradient AVO analysis to study gas hydrate resources – A case study of Iranian deep sea sediments

Presence of gas hydrate and free gas in Iranian part of Makran accretionary prism changes the elastic properties of unconsolidated sediments and produces sharp bottom simulating reflectors (BSRs) which are observed on the 2-D seismic data. Different methods have been applied to estimate the gas hydrate and free gas saturations in marine sediments based on seismic measurements. Most of these methods are based on relating the elastic properties to the hydrate and free gas saturations and remotely estimating their concentration. In this regard, using the effective medium theory (EMT) which was developed for different modes of hydrate distribution is more considered among other rock physics theories. The main concern about saturation estimations based on EMT is that the velocities of the hydrate-bearing sediments primarily depend on how they are distributed within the pore space. Therefore, understanding the modes of hydrate distribution (at least cementing or non-cementing modes) is necessary to decrease the estimation uncertainties.The first intention of paper is to investigate amplitude variation versus offset (AVO) analysis of BSR to determine the hydrate distribution modes. The results from the probable saturation revealed that if the hydrate cements the sediment grains, BSR would show the AVO class IV and if hydrate does not cement the sediment grains, then BSR would show either the AVO class II or class III depending on the free gas saturation just beneath the BSR. The second intention of paper is to introduce some templates called reflectivity templates (RTs) for quantitative study of hydrate resources. These templates are provided based on the EMT to quantify the hydrate and free gas near the BSR. Validation of this approach by synthetic data showed that a reliable quantification could be achieved by intercept-gradient RTs, only if these attributes are determined with a high accuracy and good assumptions are made about the mineralogical composition and porosity of the unconsolidated host sediments. The results of this approach applied to a 2-D marine pre-stack time migrated seismic line showed that less than 10% of the gas hydrate accumulated near to the BSR in anticlinal-ridge type structure of Iranian deep sea sediments. The free gas saturation near to the BSR by assuming a homogeneous distribution was less than 3% and by assuming patchy distribution was about 3–10%.     

Seismic character of gas hydrates on the Southeastern U.S. continental margin

Gas hydrates are stable at relatively low temperature and high pressure conditions; thus large amounts of hydrates can exist in sediments within the upper several hundred meters below the sea floor. The existence of gas hydrates has been recognized and mapped mostly on the basis of high amplitude Bottom Simulating Reflections (BSRs) which indicate only that an acoustic contrast exists at the lower boundary of the region of gas hydrate stability. Other factors such as amplitude blanking and change in reflection characteristics in sediments where a BSR would be expected, which have not been investigated in detail, are also associated with hydrated sediments and potentially disclose more information about the nature of hydratecemented sediments and the amount of hydrate present.Our research effort has focused on a detailed analysis of multichannel seismic profiles in terms of reflection character, inferred distribution of free gas underneath the BSR, estimation of elastic parameters, and spatial variation of blanking. This study indicates that continuous-looking BSRs in seismic profiles are highly segmented in detail and that the free gas underneath the hydrated sediment probably occurs as patches of gas-filled sediment having variable thickness. We also present an elastic model for various types of sediments based on seismic inversion results. The BSR from sediments of high ratio of shear to compressional velocity, estimated as about 0.52, encased in sediments whose ratios are less than 0.35 is consistent with the interpretation of gasfilled sediments underneath hydrated sediments. This model contrasts with recent results in which the BSR is explained by increased concentrations of hydrate near the base of the hydrate stability field and no underlying free gas is required.     

Gas hydrate and free gas distribution from inversion of seismic data on the South Shetland margin (Antarctica)

Travel-time inversion is applied to seismic data to produce acoustic velocity images of the upper 800 m of the South Shetland margin (Antarctic Peninsula) in three different geological domains: (i) the continental shelf; (ii) the accretionary prism; (iii) the trench. The velocity in the continental shelf sediments is remarkably higher, up to 1000 m/s at 600–700 m below seafloor, than that of the other two geological domains, due to the sediment overcompaction and erosion induced by the wax and waning of a grounded ice sheet. Pre-stack depth migration was applied to the data in order to improve the seismic image and to test the quality of the velocity fields. Where the Bottom Simulating Reflector (BSR) is present, positive and negative velocity anomalies were found with respect to a reference empirical velocity profile. The 2D-velocity section was translated in gas hydrate and free gas distribution by using a theoretical approach. The analysis revealed that the BSR is mainly related to the presence of free gas below it. The free gas is distributed in the area with variable concentration and thickness, while the gas hydrate is quite uniformly distributed across the margin.