Stratigraphic and provenance evolution of the Southern Apennines foreland basin system during the Middle Miocene to Pliocene (Irpinia-Sannio successions,Italy)

The paper deals with original stratigraphic, petrographic and structural data concerning the evolution of the southern Apennines chain (Italy). The main Langhian to Pliocene deposits cropping out in the northern sector of the southern Apennines foreland basin system (Sannio-Irpinia area) have been studied and correlated in order to document the effects of tectonic changes on the evolution of sandstone detrital modes and stratigraphic architecture. The studied sandstone units can be grouped in five key intervals: a) Numidian Flysch, mostly formed by Langhian mature quartzarenitic deposits and conformable Serravallian post-Numidian successions, formed by arkosic and calciclastic arenaceous-pelitic beds (foreland depozones); b) Langhian to Tortonian San Giorgio Fm., mostly composed of quartzofeldspatic sandstones (foredeep depozone); c) Tortonian to Early Messinian, quartz-feldspatic and partly sedimentary-carbonatoclastic petrofacies, thrust-top successions (Vallone Ponticello, Villanova del Battista and San Bartolomeo fms.); d) Late Messinian quartzolithic to quartzofeldspatic sandstones (Torrente Fiumarella, Anzano Molasse and Tufo-Altavilla unit), which can be referred to infilled thrust-top basins; e) unconformity-bounded Pliocene quartzofeldspatic sandstone strata (wedge-top depozones), characterized by synsedimentary tectonic activity.Detrital modes of the Serravallian through Middle Pliocene sandstones of the southern Apennines foreland basin system testify clear provenance relations from the accreted terranes forming the southern Apennine thrust-belt. The studied clastics show almost the same blended (quartz-feldspatic) composition; this condition could be related to the tectonic transport over thrust ramp of source rocks, as suggested by the tectonic evolutionary model. This study, dealing with sedimentary provenance analysis and tectonostratigraphic evolution, provides an example of the close relations between clastic compositions and foreland basin system development in southern Apennines.     

Evolution of deep-water stratigraphic architecture, Magallanes Basin, Chile

The ˜4000 m thick and ∼20 Myr deep-water sedimentary fill of the Upper Cretaceous Magallanes Basin was deposited in three major phases, each with contrasting stratigraphic architecture: (1) the oldest deep-water formation (Punta Barrosa Formation) comprises tabular to slightly lenticular packages of interbedded sandy turbidites, slurry-flow deposits, and siltstone that are interpreted to record lobe deposition in an unconfined to weakly ponded setting; (2) the overlying, 2500 m thick and shale-dominated Cerro Toro Formation includes a succession of stacked conglomeratic and sandstone channel-fill deposits with associated finer-grained overbank deposits interpreted to record deposition in a foredeep-axial channel-levee system; (3) the final phase of deep-water sedimentation is characterized by sandstone-rich successions of highly variable thickness and cross-sectional geometry and mudstone-rich mass transport deposits (MTDs) that are interpreted to record deposition at the base-of-slope and lower slope segments of a prograding delta-fed slope system. The deep-water formations are capped by shallow-marine and deltaic deposits of the Dorotea Formation.These architectural changes are associated with the combined influences of tectonically driven changes and intrinsic evolution, including: (1) the variability of amount and type of source material, (2) variations in basin shape through time, and (3) evolution of the fill as a function of prograding systems filling the deep-water accommodation. While the expression of these controls in the stratigraphic architecture of other deep-water successions might differ in detail, the controls themselves are common to all deep-water basins. Information about source material and basin shape is contained within the detrital record and, when integrated and analyzed within the context of stratigraphic patterns, attains a more robust linkage of processes to products than stratigraphic characterization alone.     

The Monagas Fold-Thrust belt of Eastern Venezuela. Part II: Structural and palaeo-geographic controls on the turbidite reservoir potential of the middle Miocene foreland sequence

This paper presents a new structural-stratigraphic approach to constrain the reservoir potential of the middle Miocene turbidite systems within the Monagas Fold-Thrust Belt (MFTB) and Maturín Sub-Basin (MSB) of eastern Venezuela. In the frontal anticline structures of the MFTB (Amarilis Area) light hydrocarbons have been produced from these turbidite systems which were deposited in a foreland basin with a complex tectonostratigraphic evolution.In order to predict the location of other analogous reservoirs we used the structural model presented in Part I (Parra et al., 2010) to developed a palaeo-topographic reconstruction at early-middle Miocene. We have then used this reconstruction to constrain the palaeogeography of the middle Miocene foredeep where the turbidites were deposited. The area considered has 5000 km².By middle Miocene four regions are identified: 1) The southern basin margin dipped 1.5-2.5° north; 2) The foredeep axis had a southwest-northeast orientation. Within the foredeep the proto-structures of the MFTB created submerged highs that control the distribution of sediments; 3) The northern basin margin dipped 3-4° south; the coastline was controlled by the Pirital thrust sheet; 4) The main source of sediments was located towards the northwest on the Pirital thrust sheet and Serranía del Interior.Variations in shortening across the strike of the Pirital thrust were accommodated by a lateral ramp which controlled the location of a valley that acted as the main sediment pathway for the sediments that fed the turbidite system. This relationship between the thrust belt geomorphology and the location of turbidite sediment within the foredeep must be considered in order to assess the distribution of the Miocene turbidite reservoirs.     

Sequence stratigraphy of the Miocene section,southern Gulf of Mexico

This study focuses on the interpretation of stratigraphic sequences through the integration of biostratigraphic, well log and 3D seismic data. Sequence analysis is used to identify significant surfaces, systems tracts, and sequences for the Miocene succession.The depositional systems in this area are dominantly represented by submarine fans deposited on the slope and the basin floor. The main depositional elements that characterize these depositional settings are channel systems (channel-fills, channel-levee systems), frontal splays, frontal splay complexes, lobes of debrites and mass-transport complexes.Five genetic sequences were identified and eleven stratigraphic surfaces interpreted and correlated through the study area. The Oligocene-lower Miocene, lower Miocene and middle Miocene sequences were deposited in bathyal water depths, whereas the upper Miocene sequences (Tortonian and Messinian) were deposited in bathyal and outer neritic water depths. The bulk of the Miocene succession, from the older to younger deposits consists of mass-transport deposits (Oligocene-lower Miocene); mass transport deposits and turbidite deposits (lower Miocene); debrite deposits and turbidite deposits (middle Miocene); and debrite deposits, turbidite deposits and pelagic and hemipelagic sediments (upper Miocene). Cycles of sedimentation are delineated by regionally extensive maximum flooding surfaces within condensed sections of hemipelagic mudstone which represent starved basin floors. These condensed sections are markers for regional correlation, and the maximum flooding surfaces, which they include, are the key surfaces for the construction of the Miocene stratigraphic framework. The falling-stage system tract forms the bulk of the Miocene sequences. Individual sequence geometry and thickness were controlled largely by salt evacuation and large-scale sedimentation patterns. For the upper Miocene, the older sequence (Tortonian) includes sandy deposits, whereas the overlying younger sequence (Messinian) includes sandy facies at the base and muddy facies at the top; this trend reflects the change from slope to shelf settings.     

Multi-sourced depositional sequences in the Neogene to Quaternary succession of the Venice area (northern Italy)

The Plio-Pleistocene succession of the Venice area represents part of the infill of a foreland region located between three mountain chains: the Northern Apennines, the Southern Alps and the Dinarides. This structural setting favored the development of a complex stratigraphic architecture of the succession, mostly due to the conveying of sediments from the Southern Alps to the north and the Northern Apennines to the south, in particular since the activation of strong subsidence related to the NE-ward migration of the Apennine foredeep in the early Pleistocene. Accordingly, the studied succession is composed of five third-order sequences mostly controlled by tectonics, the most recent of which display complex patterns due to the interfingering of sedimentary bodies showing contrasting directions of progradation and pinch-out. Despite this, the sequence stratigraphic method still can be applied in the present context, allowing to recognize diagnostic stratal architectures and reconstruct the relative sea-level history of the region. Moreover, the recognized peculiar stratigraphic architecture of the basin fill may serve as an analogue that needs to be taken into account to predict the distribution of porous coarse-grained sedimentary units in similar contexts, aiding for a profitable exploration and production of reservoirs and source/sealing rocks.     

Annot Sandstone in the Peïra Cava basin: An example of an asymmetric facies distribution in a confined turbidite system (SE France)

High-resolution physical stratigraphy and detailed facies analysis have been carried out in the foredeep turbidites of Annot Sandstone in the Peïra Cava basin (French Maritime Alps) in order to characterize the relationship between facies and basin morphology. Detailed correlation patterns are evidence of a distinction between a southern bypass-dominated region, coincident with a channel-lobe transition and a north-eastern depositional zone, represented by sheet-like basin plain. These depositional elements are characterized by three main groups of beds related to the downcurrent evolution of bipartite flows. These facies groups are: 1) pebbly coarse-grained massive sandstones with rip-up mudstone clasts and impact mudstone breccias (Type I and II beds) deposited by basal dense flows, 2) coarse-grained massive sandstone overlain by tractive structures (Type III and IV beds) indicating the bypass of overlying turbulent flows and 3) massive medium-grained and fine-grained laminated sandstones related to the deposition of high and low density turbidity currents (Type V and VI beds). Ponding and reflection processes, affecting the upper turbulent flows, can characterize all type beds, but especially the beds of the third group. As described in other confined basins of the northern Apennines (Italy), the lateral and vertical distribution of these type of beds, together with other important sedimentary characteristics, - such as the sandstone/mudstone ratio, bed thicknesses, amalgamation surfaces and paleocurrents - reveal that the deposition of the Annot Sandstone in the Peïra Cava basin was controlled by an asymmetric basin with a steep western margin. This margin favored, on the one hand, basal dense flow decelerations and impacts, as well as bypass and deflection of the upper turbulent flows towards the north east.     

Outcrop and seismic expression of stratigraphic patterns driven by accommodation and sediment supply turnarounds: Implications on the meaning and variability of unconformities in syn-orogenic basins

Tectonically-complex settings present accommodation and sediment supply changes with patterns and rates for which the current sequence stratigraphy paradigms are not designed. In the Tertiary Piedmont Basin (TPB) and Peri-Adriatic Basin (PAB), outcrop and seismic examples demonstrate that the observed stratal and stacking patterns cannot be entirely explained using conventional sequence-stratigraphic models. Therefore, it is of paramount importance to use a model-independent more comprehensive approach encompassing advanced sequence-stratigraphic concepts combined with process changes, while being able to consider the morphostructural complexity that characterizes these margins and their changes induced by basin reshaping.Abrupt relative sea level falls generated by uplift or basin inversion may exceed several hundreds of meters, resulting in wedge-margin progressive unconformities characterized by subaerial and subaqueous erosional truncation. A progressive increase in sediment supply occurs, expressed by increasing volume and size of mass-transport complexes overlain by forced-regressive deltas, as the maximum sediment supply is delayed until after the main uplift. Different accommodation/sediment supply ratios may also occur at the same time along different margins of the same basin, generating a diachronism in the T-R or R-T cycles, adding further complexity to the variability produced by autogenesis.On clastic shelf margins characterized by an increasing rate of relative sea level rise, such as in case of increasing rollback velocities and related flexural tilting, or following an orogenic collapse, sediment supply may not keep pace with increasing accommodation so that initially retrogradation and basinward condensation occur, marked by omission surfaces. However, when the rate of subsidence increases, the succession is punctuated by multiple subaqueous erosional unconformities marking phases of basinward tilting leading to the oversteepening of basin margins and abrupt deepening. The downwarping usually produces large-scale subaqueous erosional surfaces passing laterally into paraconformities, so hinged-margin drowning unconformities affecting clastic shelves occur, associated with regional stratigraphic gaps.The re-establishment of the slope equilibrium profile implies high volume of sediments eroded from drowned deltas and shelves, feeding turbidites deposited at the toe of above-grade slopes. These turbidites can be therefore considered as high accommodation-high sediment supply systems. This suggests that turbidites are delivered basinward not only due to bypass at sequence boundaries or during the highstand progradation of supply-driven deltas, but also due to abrupt accommodation creation on hinged-shelf margin wedges.The great variability of tectonically-driven unconformities generated under either decreasing or increasing accommodation suggests that the features described in the TPB and the PAB are probably not uncommon, controlled by linked dynamic turnarounds of accommodation, sediment supply and stratigraphy taking place throughout the development of basin reorganizations.     

Facies and sequential organisation of a mudstone-dominated slope and basin floor succession: the Gull Island Formation,Shannon Basin,Western Ireland

The lower part of the Carboniferous Shannon Basin of Western Ireland contains a deep-water succession which exceeds 1200 m in thickness that comprises five lithologically different units deposited within a confined, relatively narrow basin: (i) a calciclastic debris-flow and turbidite unit formed by resedimentation from nearby carbonate platforms, (ii) a siliciclastic black shale succession with former source potential which onlaps basin margins (Clare Shales), (iii) a sandstone-dominated turbidite formation, controlled by ponded accommodation and deposited axially in the basin (Ross Formation), (iv) a mudstone-rich turbidite-bearing succession, which onlaps basin margins (lower Gull Island Formation), and (v) a mudstone-dominated prograding slope succession (upper Gull Island Formation and lower Tullig Cyclothem), which grades transitionally upwards into deltaic deposits. The top unit records progradation at a time when basin differential subsidence had diminished significantly and local basin topography did not control deposition. The two upper mudstone-dominated units are different in terms of both sandstone content and their genetic significance within the overall basin-fill, and their potential relevance as reservoir analogues.The lower part of the Gull Island Formation contains three principal facies associations: (a) shallow turbidite channels and sheets representing channel margin and levee deposits, (b) mud-rich slumps, and (c) less than 1 m thick, rare, hemipelagic shales. More than 75% is deformed by soft-sediment deformation, but only to a smaller degree affecting sandstone units. The turbidites record transport to the ENE, along the axis of the basin, while the slumps were derived from an unstable northern slope and transported transversely into the basin towards the southeast. The distribution of turbidite sandstone and slumps is inversely proportional. Sandstones decrease in importance away from the basin axis as slumps increase in number and thickness. The lower part of the Gull Island Formation is interpreted to record progressive fill of a deep basin controlled by local, healed slope accommodation with onlap/sidelap of the basin margins. The instability resulted from a combination of fault-controlled differential subsidence between basin margin and basin axis, and high rates of sedimentation.The upper part of the Gull Island Formation is entirely dominated by mudstones, which grade upwards into siltstones. It contains rare, up to 15 m thick, isolated channels filled by turbidites, showing transport towards the east. The upper part records easterly progradation of a deep-water slope genetically tied to overlying deltaic deposits, and controlled by regional accommodation.The contrasts between the lower and upper parts of the Gull Island Formation show that onlapping/sidelapping turbidite successions have reservoir potential near basin axes, but that prograding deep-water slopes are less likely to have reservoir potential of significance. A suggested regional downlap surface between the two parts is a significant break and marker in terms of reservoir potential.     

The flexural margin,the foredeep,and the orogenic margin of a northern Cordilleran foreland basin: Cretaceous tectonostratigraphy and detrital zircon provenance,northwestern Canada

Reconstructions of the Albian to Campanian foreland basin adjacent to the northern Canadian Cordillera are based on outcrop and well log correlations, seismic interpretation, and reconnaissance-level detrital zircon analysis. The succession is subdivided into two tectonostratigraphic units. First is an Albian tectonostratigraphic unit that was deposited on the flexural margin of a foreland basin. At the base is a shallow marine sandstone interval that was deposited during transgressive reworking of sediment from cratonic sources east of the basin that resulted in a dominant 2000–1800 Ma detrital zircon age fraction. Subsequent deposition in a west-facing muddy ramp setting was followed by east-to-west shoreface progradation into the basin.Near the Albian–Cenomanian boundary, regional uplift and exhumation resulted in an angular unconformity at the base of the Cenomanian–Campanian tectonostratigraphic unit. Renewed subsidence in the Cenomanian resulted in deposition of organic-rich, radioactive, black mudstone of the Slater River Formation in a foredeep setting. Cenomanian–Turonian time saw west-to-east progradation of a shoreface-shelf system from the orogenic margin of the foreland basin over the foredeep deposits. Detrital zircon age peaks of approximately 1300 Ma, 1000 Ma, and 400 Ma from a Turonian sample are consistent with recycling of Mississippian and older strata from the Cordillera west of the study area, and show that the orogen-attached depositional system delivered sediment from the orogen to the foreland basin. A near syndepositional detrital zircon age of ca. 93 Ma overlaps with known granitoid ages from the Cordillera. After the shelf system prograded across the study area, subsequent pulses of subsidence and uplift resulted in dramatic thickness variations across an older structural belt, the Keele Tectonic Zone, from the Turonian to the Campanian.The succession of depositional systems in the study area from flexural margin to foredeep to orogenic margin is attributed to coupled foreland propagation of the front of the Cordilleran orogen and the foreland basin. Propagation of crustal thickening and deformation toward the foreland is a typical feature of orogens and so the distal to proximal evolution of the foreland basin should also be considered as typical.     

Seismic stratigraphy of the western South Korea Plateau,East Sea: implications for tectonic history and sequence development during back-arc evolution

The western South Korea Plateau in the East Sea (Sea of Japan) is occupied by rifted continental fragments formed in association with the early phase of back-arc opening. The present study focuses on the seismic stratigraphy of the sedimentary succession and the underlying acoustic basement in this region, based on closely spaced multichannel seismic reflection profiles. The sedimentary succession occurs mainly within a series of subparallel basement troughs (grabens or half grabens) bounded by faulted continental blocks (horsts) or volcanic ridges, and commonly floored by extrusive volcanic rocks showing hyperbolic reflectors. These features are strongly suggestive of continental rifting accompanied by normal faulting, volcanic activity and high rates of basin subsidence. The sedimentary succession can be subdivided into four seismic units. Unit 1 is characterized by short and irregular high-amplitude reflectors and interpreted as a syn-rift deposit consisting of a non-marine volcanics/sediment complex in topographic lows. Units 2 and 3 formed in an open marine environment during the Middle Miocene to Early Pliocene, characterized by an onlap-fill and later draping marine sedimentary succession dominantly composed of hemipelagic sediments and turbidites with frequent intercalation of mass-flow deposits. Along the western margin of the plateau, these units were deformed under a compressional regime in the Early Pliocene, associated with the back-arc closing phase. Unit 4 (deposited since the Early Pliocene) comprises hemipelagic sediments and turbidites with evidence of sporadic slides/slumps.     

Sequence stratigraphy of an argillaceous,deepwater basin-plain succession: Vischkuil Formation (Permian), Karoo Basin,South Africa

The 380 m thick fine-grained Vischkuil Formation comprises laterally extensive hemipelagic mudstones, separated by packages of graded sandstone and siltstone turbidites, and volcanic ash beds, and is an argillaceous precursor to a 1 km thick sand-prone basin floor fan to shelf succession. The Vischkuil Formation provides an insight into the process by which regional sand supply is initiated and for testing sequence stratigraphic principles in a basin plain setting. Regionally mapped 1–2 m thick hemipelagic mudstone units are interpreted as condensed drapes that represent the starved basin plain equivalents of transgressive systems tracts and maximum flooding surface on the coeval shelf (now removed during later uplift). The section above each mudstone drape comprises siltstone turbidites interpreted as highstand systems tract deposits and a surface of regional extent, marked by an abrupt grain size shift to fine sandstone. These surfaces are interpreted as sequence boundaries, related to abrupt increases in flow volume and delivery of sand grade material to the basin-plain. The interpreted lowstand systems tract comprises sandstone-dominated turbidites and is overlain by another hemipelagic mudstone drape. The upper Vischkuil Formation is marked by three 20–45 m thick debrites, with intraformational sandstone clasts up to 20 cm in diameter that can be mapped over 3000 km². In each case, debrite emplacement resulted in widespread deformation of the immediately underlying 3–10 m of silty turbidites. A sequence boundary is interpreted at the base of each deformation/debrite package. Six depositional sequences are recognised and the interfered energy shift across each successive sequence boundary and LSTs include a larger volume of sandstone increases up section. The lower two sequences thin to the NW and show NW-directed palaeocurrents. The four overlying sequences show a polarity switch in palaeocurrent directions and thinning, to the E and SE. Sequence 6 is overlain sharply by the 300 m thick sandstone dominated Fan A of the Laingsburg Formation. The LST debrites may indicate gradual development of major routing conduits that subsequently fed Fan A. The polarity shift from westward flowing turbidity currents to an eastward prograding deepwater to shelf system represents establishment of a long term feeder system from the west. Sand supply to the Karoo basin floor was established in an incremental, stepwise manner. Given the early post-glacial setting in an icehouse climate, glacio-eustatic sea-level changes are considered to have been the main control on sequence development.     

Tectonostratigraphic evolution of the Morichito piggyback basin, Eastern Venezuelan Basin

The Morichito piggyback basin (MPB) is a SW-NE-oriented depocenter in the Eastern Venezuelan Foreland Basin (EVFB). This piggyback basin formed by overlying the Pirital thrust during the middle to late Miocene as a result of oblique collision between the Caribbean and South-American Plates. The MPB covers an area encompassing approximately 1000 km² between the Serrania del Interior range and the Pirital high, which is a hanging wall uplift along the Pirital thrust that acts as a confining barrier on the southern boundary of the MPB. Previous studies have tried to address the tectonostratigraphic significance of the MPB, but new biostratigraphic information and recently acquired 3D seismic data have allowed us to expand the understanding of this basin. The MPB occupies a relatively small area of the EVFB; however, the MPB contains a valuable stratigraphic record that can be used to unveil the timing of the main deformational events that took place in the EVFB.This work presents the tectonostratigraphic evolution of the MPB by defining four tectonostratigraphic sequences (T1-T4). Each sequence was defined on the basis of integration of well logs, biostratigraphy, and seismic geomorphological interpretations. T1 (24-16 Ma) (late Oligocene to middle Miocene), which was deposited in shallow-marine environments, extends to the south of the Pirital high beyond the boundaries of the MPB. T1 is equivalent to the early foredeep stage of the EVFB, having been formed when structural deformation and uplifting were already occurring to the north on the proto-Serrania del Interior range (∼24-16 Ma) and the Pirital thrust was active (∼22 Ma). T2 (16-11 Ma) (middle to late Miocene) is composed of alluvial-fan deposits derived from the proto-Serrania del Interior range. The geometry and internal configuration of T2 indicate that during this time the basin was transitioning from an open-foreland basin to a confined piggyback basin. During deposition of T2, the Pirital fault was active as an out-of-sequence thrusting event (16-∼11 ma). T3 (late Miocene) and T4 (early Pliocene to Recent), composed of shallow-marine and fluvial deposits, were deposited in an already restricted piggyback basin. The Pirital high was already in place during deposition of T3 (∼11-9.3 ma). T3 and T4 represent the final phases of MPB infilling, when tectonic activity and subsidence were at their lowest rates. MPB sedimentary infilling dates the activity of thrusting events in the proto-Serrania del Interior (∼24-16 Ma), timing of maximum deformation associated with the Pirital out-of-sequence thrusting event (16-∼11 Ma), timing of final emplacement of the Pirital high (∼11-9.3 Ma), and the beginning of tectonic quiescence (<5.2 Ma).     

Late Miocene–early Pliocene planktonic foraminifer event-stratigraphy of the Bajo Segura basin: A complete record of the western Mediterranean

The Bajo Segura basin (eastern Betic Cordillera) has one of the most complete late Miocene–early Pliocene marine records of the western Mediterranean. An updated planktonic foraminifer zonal scheme based on recent astronomically tuned biozones is presented for this interval, documenting a complete succession of biostratigraphic markers, from biozone MMi9 (earliest Tortonian) to MPl3 (latest early Pliocene), of likely significance for regional-scale correlation throughout the Mediterranean. The findings reveal a series of intrazonal events (some unreported until now in the Mediterranean Neogene basin), including the particularly interesting two influxes of the Globorotalia miotumida group during the Tortonian. These biostratigraphic findings are the basis for a framework of the major allostratigraphic units in the basin based on planktonic foraminifer event-stratigraphy: synthems Tortonian I, Tortonian II, Tortonian-Messinian I, Messinian II, and Pliocene. In addition, the timing of the main tectono-sedimentary and palaeogeographic events throughout the basin's evolution has been further constrained. Our results suggest that, at least in the Bajo Segura basin, the late-Messinian barren interval (non-distinctive zone) can be considered an ecobiostratigraphic zone (cenozone) characterized by dwarf fauna of planktonic foraminifera. Consequently, the Bajo Segura composite section can be regarded as a biostratigraphic reference section for Neogene basins in the Betic Cordillera and hence also in the Western Mediterranean.     

Seal rock deformation by polygonal faulting,offshore Uruguay

Due to a lack of borehole data, reservoir and seal rock presence in frontier basins is typically inferred from seismic reflection data. However, analysis of the geometry and kinematic development of polygonal fault systems (PFS), which almost exclusively form within very fine-grained strata, provides another, largely untested method to infer reservoir and seal rock presence. We here use very high-quality 3D seismic reflection data from offshore Uruguay and a range of quantitative GIS-based techniques to document the planform and cross-sectional characteristics of a basin-scale (>6400 km²) PFS, and to investigate the role that stratigraphic variations in the Tertiary deep-water host-rock have on its geometrical variability and kinematic development. We demonstrate that a series of likely sandstone-rich deep-water deposits occur at the base of and within the main PFS tier. The geometric characteristics and throw distribution on individual polygonal faults suggest these sandstone-rich deep-water deposits represent a mechanical barrier to fault propagation, thus influencing fault height and areal density and, in some cases, strike. We argue that in largely unexplored, deep-to ultra-deep water basins, such as those characterizing offshore Uruguay, the distribution and geometric attributes of PFS can be used to delineate sandstone-rich reservoir bodies. Furthermore, these characteristics may help exploration geoscientists better understand seal heterogeneity and quality in data-poor basins.     

Cenozoic sequence stratigraphy of the Kachchh Basin,India

The Kachchh sedimentary basin in the western continental margin of India is a peri-cratonic rift basin which preserves a nearly complete rock record from Middle Jurassic to Recent, punctuated by several stratigraphic breaks. The Cenozoic sediments exposed in the western part of the Kachchh mainland extend offshore into the present-day continental shelf. The unique feature of the outcropping area is a nearly complete, richly fossiliferous and easily accessible Cenozoic succession. Detailed field mapping and litho-biostratigraphic studies have made it possible to identify the chronostratigraphic units, map them in the field and extend the correlation into the offshore, aided by the development of continuously recognizable key biostratigraphic horizons and time boundaries. Detailed field mapping of key sections integrated with the litho-biostratigraphic information has helped in working out a sequence stratigraphic framework for the Cenozoic succession in the basin. The succession comprises a first-order passive margin sequence. Excellent biostratigraphic control has enabled identification of unconformities of various magnitudes which in turn have helped in mapping 5 second-order and four third-order sequences. Each sequence is discussed with respect to its extent, nature of sequence boundaries, sedimentary fill, key sequence stratigraphic surfaces and depositional setup, to understand the Cenozoic sequence stratigraphic architecture of the basin.     

Depositional architecture and sequence stratigraphy of the Karoo basin floor to shelf edge succession, Laingsburg depocentre, South Africa

The Laingsburg depocentre of the SW Karoo Basin, South Africa preserves a well-exposed 1200 m thick succession of upper Permian strata that record the early filling of a basin during an icehouse climate. Uniformly fine-grained sandstones were derived from far-field granitic sources, possibly in Patagonia, although the coeval staging and delivery systems are not preserved. Early condensed shallow marine deposits are overlain by distal basin plain siltstone-prone turbidites and volcanic ashes. An order of magnitude increase in siliciclastic input to the basin plain is represented by up to 270 m of siltstone with thin sandstone turbidites (Vischkuil Formation). The upper Vischkuil Formation comprises three depositional sequences, each bounded by a regionally developed zone of soft sediment deformation and associated 20-45 m thick debrite that represent the initiation of a major sand delivery system. The overlying 300 m thick sandy basin-floor fan system (Unit A) is divisible into three composite sequences arranged in a progradational-aggradational-retrogradational stacking pattern, followed by up to 40 m of basin-wide hemipelagic claystone. This claystone contains Interfan A/B, a distributive lobe system that lies 10 m beneath Unit B, a sandstone-dominated succession that averages 150 m thickness and is interpreted to represent a toe of slope channelized lobe system. Unit B and the A/B interfan together comprise 4 depositional sequences in a composite sequence with an overall basinward-stepping stacking pattern, overlain by 30 m of hemipelagic claystone. The overlying 400 m thick submarine slope succession (Fort Brown Formation) is characterized by 10-120 m thick sand-prone to heterolithic packages separated by 30-70 m thick claystone units. On the largest scale the slope stratigraphy is defined by two major cycles interpreted as composite sequence sets. The lower cycle comprises lithostratigraphic Units B/C, C and D while the upper cycle includes lithostratigraphic Units D/E, E and F. In each case a sandy basal composite sequence is represented by an intraslope lobe (Units B/C and D/E respectively). The second composite sequence in each cycle (Units C and E respectively) is characterized by slope channel-levee systems with distributive lobes 20-30 km down dip. The uppermost composite sequence in each cycle (Units D and F respectively) are characterised by deeply entrenched slope valley systems. Most composite sequences comprise three sequences separated by thin (<5 m thick) claystones. Architectural style is similar at individual sequence scale for comparable positions within each composite sequence set and each composite sequence. The main control on stratigraphic development is interpreted as late icehouse glacio-eustasy but along-strike changes associated with changing shelf edge delivery systems and variable bathymetry due to differential substrate compaction complicate the resultant stratigraphy.     

MTD distribution on a ‘passive’ continental margin: The Espírito Santo Basin (SE Brazil) during the Palaeogene

Mass-wasting on the Brazilian margin during the Mid-Eocene/Oligocene resulted in the accumulation of recurrent Mass Transport Deposits (MTDs) offshore Espírito Santo, SE Brazil. In this paper, we use three-dimensional seismic data to characterize a succession with stacked MTDs (Abrolhos Formation), and to assess the distribution of undeformed stratigraphic packages (i.e. turbidites) with reservoir potential separating the interpreted MTDs. High-amplitude strata in less deformed areas of MTDs reflect their internal heterogeneity, as well as possible regions with a higher sand content. Separating MTDs, turbiditic intervals reach 100 ms Two-Way Travel Time (TWTT), with thicker areas coincident with the flanks of growing diapirs and areas of the basin where mass-wasting is less apparent. Turbiditic strata laterally grade into, or are eroded by MTDs, with transitional strata between MTDs and turbidites being also influenced by the presence of diapirs. MTDs show average thickness values ranging from 58 to 82 ms TWTT and constitute over 50% of Eocene-Oligocene strata along the basin slope. Low average accumulations of 58 ms TWTT in areas of high confinement imposed by diapirs suggest sediment accumulation upslope, and/or bypass into downslope areas. This character was induced by the high sediment input into the basin associated with coastal erosion and growth of the Abrolhos volcanic plateau. Our results suggest that significant amounts of sediment derive from the northwest, and were accumulated in the middle-slope region. Interpretations of (palaeo)-slope profiles led to the establishment of a model of margin progradation by deposition of MTDs, contrasting with the retrogressive erosional margins commonly associated with these settings.     

Geometry and architectural associations of co-genetic debrite–turbidite beds in basin-margin strata, Carboniferous Ross Sandstone (Ireland): Applications to reservoirs located on the margins of structurally confined submarine fans

Co-genetic debrite–turbidite beds are most commonly found in distal basin-plain settings and basin margins. This study documents the geometry, architectural association and paleogeographic occurrence of co-genetic debrite–turbidite beds in the Carboniferous Ross Sandstone with the goal of reducing uncertainty in the interpretation of subsurface data in similarly shaped basins where oil and gas is produced.The Ross Sandstone of western Ireland was deposited in a structurally confined submarine basin. Two outcrops contain co-genetic debrite–turbidite beds: Ballybunnion and Inishcorker. Both of the exposures contain strata deposited on the margin of the basin. An integrated dataset was used to characterize the stratigraphy of the Ballybunnion exposure. The exposure is divided into lower, middle, and upper units. The lower unit contains laminated shale with phosphate nodules, structureless siltstone, convolute bedding/slumps, locally contorted shale, and siltstone turbidites. The middle unit contains co-genetic debrite–turbidite beds, siltstone turbidites, and structureless siltstone. Each co-genetic debrite–turbidite bed contains evidence that fluid turbulence and matrix strength operated alternately and possibly simultaneously during deposition by a single sediment-gravity-flow event. The upper unit contains thin-bedded sandy turbidites, amalgamated sandy turbidites, siltstone turbidites, structureless siltstone, and laminated shale. A similar vertical facies pattern is found at Inishcorker.Co-genetic debrite–turbidite beds are only found at the basin-margin. We interpret these distinct beds to have originated as sand-rich, fully turbulent flows that eroded muddy strata on the slope as well as interbedded sandstone and mudstone in axial positions of the basin floor forming channels and associated megaflute erosional surfaces. This erosion caused the axially dispersing flows to laterally evolve to silt- and clay-rich flows suspended by both fluid turbulence and matrix strength due to a relative increase in clay proportions and associated turbulence suppression. The flows were efficient enough to bypass the basin center/floor, physically disconnecting their deposits from coeval lobes, resulting in deposition of co-genetic debrite–turbidite beds on the basin margin. The record of these bypassing flows in axial positions of the basin is erosional surfaces draped by thin siltstone beds with organic debris.A detailed cross-section through the Ross Sandstone reveals a wedge of low net-to-gross, poor reservoir-quality strata that physically separates sandy, basin-floor strata from the basin margin. The wedge of strata is referred to as the transition zone. The transition zone is composed of co-genetic debrite–turbidite beds, structureless siltstone, slumps, locally contorted shale, and laminated shale. Using data from the Ross Sandstone, two equations are defined that predict the size and shape of the transition zone. The equations use three variables (thickness of basin-margin strata, thickness of coeval strata on the basin floor, and angle of the basin margin) to solve for width (w) and trajectory of the basinward side of the low net-to-gross wedge (β). Beta is not a time line, but a facies boundary that separates sandy basin floor strata from silty basin-margin strata. The transition zone is interpreted to exist on lateral and distal margins of the structurally confined basin.Seismic examples from Gulf of Mexico minibasins reveal a wedge of low continuity, low amplitude seismic facies adjacent to the basin margin. Strata in this wedge are interpreted as transition-zone sediments, similar to those in the Ross Sandstone. Besides defining the size and shape of the transition zone, the variables “w” and “β” define two important drilling parameters. The variable “w” corresponds to the minimum distance a well bore should be positioned from the lateral basin margin to intersect sandy strata, and “β” corresponds to the deviation (from horizontal) of the well bore to follow the interface between sandy and low net-to-gross strata. Calculations reveal that “w” and “β” are related to the relative amount of draping, condensed strata on the margin and the angle of the basin margin. Basins with shallowly dipping margins and relatively high proportions of draping, clay-rich strata have wider transition zones compared to basins with steeply dipping margins with little draping strata. These concepts can reduce uncertainty when interpreting subsurface data in other structurally confined basins including those in Gulf of Mexico, offshore West Africa, and Brunei.     

Evolution of a Miocene carbonate shelf (northern Apennines,Italy) revealed through a quantitative compositional study

The evolution of the Miocene San Marino carbonate shelf (Torriana outcrop), developed on the accretionary prism of the northern Apennines, has been interpreted through a stratigraphic and compositional study. Modal analysis allowed to quantify the framework components and to identify four microfacies through which the main steps of the carbonate ecosystem were traced. The healthy phase of the carbonate shelf, dominated by bryozoans and echinoids, originated in a high-energy transgressive setting and evolved during a warm period characterized by a progressive increase of nutrients. The transitional stage is marked by a reduction of carbonate productivity and by terrigenous intermittent pulses associated with bioclast fragmentation. The drowning succession corresponds to deepening upward facies formed by fine-grained hybrid arenites to sandy marls with abundant planktonic foraminifera, glauconitic grains and clay matrix. The demise of the carbonate shelf might have resulted from a combination of regional and global factors that interplayed controlling the detrital input, the nutrient budget and the deepening of the basin. Synsedimentary tectonics triggered subsidence of the basin and enhanced terrigenous discharge. Moreover, the superposition of paleoclimatic and paleoceanographic events (Monterey and Middle Miocene Climate Optimum) could have contributed with the intense weathering and remarkable detrital and nutrients supply.