Seal rock deformation by polygonal faulting,offshore Uruguay

Due to a lack of borehole data, reservoir and seal rock presence in frontier basins is typically inferred from seismic reflection data. However, analysis of the geometry and kinematic development of polygonal fault systems (PFS), which almost exclusively form within very fine-grained strata, provides another, largely untested method to infer reservoir and seal rock presence. We here use very high-quality 3D seismic reflection data from offshore Uruguay and a range of quantitative GIS-based techniques to document the planform and cross-sectional characteristics of a basin-scale (>6400 km²) PFS, and to investigate the role that stratigraphic variations in the Tertiary deep-water host-rock have on its geometrical variability and kinematic development. We demonstrate that a series of likely sandstone-rich deep-water deposits occur at the base of and within the main PFS tier. The geometric characteristics and throw distribution on individual polygonal faults suggest these sandstone-rich deep-water deposits represent a mechanical barrier to fault propagation, thus influencing fault height and areal density and, in some cases, strike. We argue that in largely unexplored, deep-to ultra-deep water basins, such as those characterizing offshore Uruguay, the distribution and geometric attributes of PFS can be used to delineate sandstone-rich reservoir bodies. Furthermore, these characteristics may help exploration geoscientists better understand seal heterogeneity and quality in data-poor basins.     

Characteristics and genesis of the polygonal fault system in southern slope of the Qiongdongnan Basin,South China Sea

Based on 3D seismic data, the polygonal fault system (PFS) discovered in the southern slope of the Qiongdongnan (QDN) Basin was studied through fine seismic interpretation and coherent cube analysis. The results show that: ① the PFS is mostly composed of small plate-type faults, with fault length of 1–3 km, maximum fault throw of 20–40 m and dip angle of 25°–45°; ② the PFS is mainly observed in the Huangliu Formation, deposited in the early stage of fast slope depression; ③ the PFS is layer-bound and can be separated into two tiers by T31′ interface with obvious channel incision features; ④ the PF of tier2 exhibit “y” structural style, including two parallel faults, master fault and associated fault, dipping in opposite directions. Their intersection relationship can be divided into three classes, and 14 sub-classes based on the fault intersection relationship of master fault and its associated fault; ⑤ the PFS is dominated by two strikes: NE60° and NW150°, indicating that it was controlled by tensile stress produced by differential settlement between the Xisha uplift and QDN basin; and ⑥ its genesis was jointly controlled by the syneresis of clay minerals and overpressure cyclical dehydration.     

The development of polygonal fault systems by syneresis of colloidal sediments

Polygonal fault systems occur in numerous sedimentary basins worldwide, are generally located on passive margins in onlap fill units and tend to comprise the finest grained sediments in this geological setting. These fault systems have been most thoroughly described in the central North Sea basin and the detailed structure shows a significant correlation with lithological variations, both vertically and laterally. Extension measured in stacked decoupled tiers of polygonal faults correlates positively with both clay fraction and smectite content. Lateral facies variations are also observed and indicate that time-equivalent sequences upslope from the smectite-rich polygonally faulted sediments are coarse-grained, clay-poor and undeformed. This leads us to believe that the structure and geometry of the fault system are controlled by the colloidal nature of the sediments, and that the volumetric contraction measured on seismic sections can be accounted for by syneresis of colloidal smectitic gels during early compaction. Syneresis results from the spontaneous contraction of a sedimentary gel without evaporation of the constituent pore fluid. This process occurs due to the domination of interparticle attractive forces in marine clays, dependent on environment, and is governed by the change of gel permeability and viscosity with progressive compaction. The process of syneresis can account for a number of structural features observed within the fault systems, such as tiers of faults, the location of maximum fault throw and growth components at upper fault tips. As such, this paper represents the first attempt to correlate microscale properties of clay-rich sediments to their macroscale seismic character.     

Lithofacies and origin of the Late Triassic muddy gravity-flow deposits in the Ordos Basin,central China

Fine-grained sediments from the Late Triassic Yanchang Fm. in the Ordos Basin (central China) were studied by core analysis and geophysical logging. Part of the mudstones in this formation are stratified, part of them are unstratified; the various mudstones can be subdivided into eight types on the basis of their structures and textures. They represent a variety of environments, ranging from delta fronts and subaqueous fans to deep-water environments. Part of the sediments were reworked and became eventually deposited from subaqueous gravity flows, such as mud flows, turbidity currents and hyperpycnal flows that easily developed on the clay-rich deltaic slopes. The sediments deposited by such gravity flows show abundant soft-sediment deformation structures. Understanding of such structures and recognition of fine-grained sediments as gravity-flow deposits is significant for the exploration of potential hydrocarbon occurrences. Because fine-grained deposits become increasingly important for hydrocarbon exploration, and because the sediments in the lacustrine Yanchang Formation were deposited by exactly the same processes that play a role in the accumulation of deltaic and prodeltaic fine-grained sediments, the sedimentological analysis provided here is not only important for the understanding of deep lacustrine sediments like the Yanchang Formation, but also for a better insight into the accumulation of fine-grained prodeltaic deep-marine sediments and their potential as hydrocarbon source rocks and reservoir rocks.     

Estuarine sediment transport by gravity-driven movement of the nepheloid layer, Long Island Sound

Interpretation of sidescan-sonar imagery provides evidence that down-slope gravity-driven movement of the nepheloid layer constitutes an important mode of transporting sediment into the basins of north-central Long Island Sound, a major US East Coast estuary. In the Western Basin, this transport mechanism has formed dendritic drainage systems characterized by branching patterns of low backscatter on the seafloor that exceed 7.4 km in length and progressively widen down-slope, reaching widths of over 0.6 km at their southern distal ends. Although much smaller, dendritic patterns of similar morphology are also present in the northwestern part of the Central Basin. Because many contaminants display affinities for adsorption onto fine-grained sediments, and because the Sound is affected by seasonal hypoxia, mechanisms and dispersal pathways by which inorganic and organic sediments are remobilized and transported impact the eventual fate of the contaminants and environmental health of the estuary.     

关于南海北部深水重力流沉积问题的讨论

深水沉积主要泛指陆架以外的沉积,尤以沉积物重力流成因的沉积受到深水油气勘探界的关注,它的沉积成因、过程和相组成均与河流、三角洲、浅海等牵引流沉积有很大的差异。当前南海北部大规模深水勘探已经全面展开,正确认识深水重力流沉积具有重要意义,但由于我国油气勘探对深水重力流沉积缺乏勘探实践,目前对深水重力流沉积有不同的理解,如深水重力流沉积一定要在多深的水下沉积,深水重力流沉积的判识一定要有深水环境的标志,深水重力流沉积作用保留在地层中的沉积层理构造特征一定是重力流流态的等。通过南海北部深水实钻资料和沉积体系的研究,认为深水重力流沉积具有偶发而动、沿坡搬运、择低而积、有限分布的特点。陆架坡折带以外的粗陆源碎屑沉积以重力流沉积成因为主,低位体系域的重力流更易于发育砂岩储层。陆坡区深水重力流沉积的特点表明储层识别是深水勘探的关键工作。     

Present day sedimentary processes on the northern Iberian shelf

The Galicia-Minho Shelf features two large mud patches, the Douro and the Galicia Mud patches. These are recent sediment bodies that have accumulated under a combination of conditions including: (1) abundant supplies of sediment; (2) morphological barriers that act as sediment traps; and (3) hydrographic conditions that favour the accumulation of fine sediment in these sinks. This paper describes the mechanisms controlling the deposition of the fine-grained sediment depositions and the processes that result in resuspension processes on the Galicia-Minho Shelf.Fine-grained sediments are provided from discharges from the river basins on the southern sector of the shelf, mainly the Douro and Minho rivers. Sediments are exported from river estuaries onto the shelf during episodic flood events. In contrast, most of the sediments originating from the Galician hinterland fail to contribute significantly to sedimentation on the shelf, because they are retained in the Galician Rías, which function as sediment traps.Sediments deposited on the shelf are frequently remobilized, particularly during southwesterly storms that coincide with downwelling conditions. Once in suspension the fine-grained sediments are transported northwards by the poleward flowing bottom currents and are eventually deposited on the Douro and Galicia Mud patches after a series of resuspension events. The locations of the two mud patches are strongly influenced by the shelf morphology.Fines already deposited on the mud patches are occasionally reintroduced into the system by large storm events. Some material from the Douro Mud patch and adjacent areas is re-deposited in the Galicia Mud patch. It is probable that sediments re-suspended from the Galicia Mud patch are carried off the shelf when storm events coincide with downwelling conditions.     

Fault linkage patterns and their control on the formation of the petroleum systems of the Erlian Basin, Eastern China

Fault linkage patterns in rift basins are very common. While the process of fault linkage may be very short, it changes sedimentation patterns before and after linkage and controls the development of half-grabens. The propagation and growth of boundary faults can be divided into a simple fault propagation pattern and a fault growth-linkage pattern. Based on structural style, sedimentation patterns and oil-source correlations in the Erlian Basin, three types of grabens and petroleum systems can be identified. The Abei graben is controlled by a single boundary fault and forms an independent petroleum system. The Saihantala graben is controlled by several linked faults, which also has an independent petroleum system. The Wuliyasitai Depression controlled by two boundary fault segments which results in two petroleum systems. As not all half-grabens develop one petroleum system; they may, therefore, have two or more systems. The relay ramps between fault segments before linkage are the locations of deposition of sands and conglomerates, and consequently, are the focus areas for stratigraphic–lithologic trap exploration.     

Geochemical tracers of northern Portuguese estuarine sediments on the shelf

The northern Portuguese coastal zone is drained by large Iberian rivers, along which there is intensive industrial, agricultural and urban activity. Offshore of the two main river basins of the Douro and Minho, two fine-grained sedimentary formations can be characterised. A geochemical study of this sediment cover has been performed focussing in particular on the fine deposits and the adjacent estuaries. The chemical composition of superficial sediments collected from the northern Portuguese shelf and from the river basins of the Minho and Douro rivers was determined for major, minor and trace elements; the rare earth elements (REE) composition was also determined in selected samples. Statistical analyses of these data for the shelf sediments allow us to identify elements with similar behaviours and the different sediment types along the shelf, and to evaluate of their origins. Downcore profiles of the chemical composition of the fine sediments reveal no evidence for changes induced by recent human activities. To assess the influence of the rivers on the fine sedimentary formations, the elemental distribution patterns of selected sediments have been compared with the estuarine sediments. Lithogenic elements composition normalised to Al and the shale normalised REE distributions showed there are similarities between the Douro River sediments and the sediment composition of the Douro and Galicia mud patches. However, the Galicia mud field showed no relationship in its chemical composition to sediments derived from the Minho River. Nor was any evidence for heavy metal contamination originating from the Douro estuary detected in anthropogenic element/Al ratios in the shelf sediments. This may be because of processes associated with resuspension, complexation and bioturbation that occur during sediment transport and deposition. Nevertheless, the Douro River seems to be the main continental source of fine sediments being deposited on the northern Portuguese shelf.     

Sediment distribution patterns on the Galicia-Minho continental shelf

A sedimentological and bathymetric study of the Minho-Galicia Shelf shows a strong contrast between a southern shelf region with a thin partially relict cover of sands and gravel, and a northern region where fine-grained sediments predominate. This contrast is explained through differences in the sediment supply, the oceanographic environment (storms and ocean currents) and the morphology of the shelf which results from its underlying tectonic framework.Most sediment is supplied to the Galicia-Minho Shelf by river discharges onto the Minho Shelf, particularly that from the Douro River. In the northern part of the shelf the Galician Rías act as sediment traps rather than sediment suppliers. The bulk of the sediment washes out of the rivers during episodic storm events. While most of the coarse sediments remain deposited close to the coast, the fine-grained material is exported to the outer areas of the shelf. Subsequently, coarse sediments close to the coast are transported southwards by the littoral drift. Whereas the fine-grained material is frequently resuspended through the action of the large swells who influence reaches deep into the water. This frequent resuspension has a long-term sorting effect on the sediments. Furthermore, resuspended sediments on the middle and outer regions of the shelf are transported northwards by a poleward flowing bottom current.As a consequence of the differential transport of coarse sediments to the south, and of the fine-grained sediments to the north, the outer reaches of the Minho Shelf are relatively poor in recent sediments. In many areas relict sediments as well as features associated with ancient coastlines and river mouths, still appear as seabed features. In contrast, the northern regions of the shelf are covered by a thin veneer of fine-grained material that smooth other most of these fossil features.The fine-grained sediment fractions (mostly very fine sands to coarse silts) are deposited in two large mud patches, the Douro and the Galicia Mud Patches, which are situated at water depths of around 100–120 m. These two mud patches are both controlled by the local hydrodynamics and morphology. The Beiral de Viana, to the west of the Douro Mud Patch is a plateau, up to 20 m high lying parallel to the shelf-break and is a morphological expression of an underlying horst system. This plateau acts as a barrier that prevents the drift of some of the fine-grained material to the west, out over the shelf-break and the continental slope. The Galicia Mud Patch is situated on the eastern part of the Galician Shelf to the north of the Douro Mud Patch. It is situated near the extension of the Porto–Tomar fault, which results in the shelf being usually steep in this region, down to a depth of about 100 m. West of this area the slope is much more gentle. Northward transport of the sediment is strongly reduced by the E–W trending outcrops of plutonic and metamorphic rocks.     

Stress state in the Cuu Long and Nam Con Son basins, offshore Vietnam

The results presented in this paper are the first published estimates of the complete stress tensor in the Cuu Long and Nam Con Son basins, offshore Vietnam. We analysed in situ stress and pore pressure fields in the sedimentary formations using data from petroleum exploration and production wells to evaluate the stress state in these basins. The data were obtained from the seafloor to 4300 m burial depth and include both hydrostatic and overpressured sections. Minimum horizontal stresses were obtained from extended leak-off tests and mini-fracture tests. Maximum horizontal stresses were estimated from drilling-induced fracture parameters and borehole breakout widths in twelve wells using rock properties measured in the laboratory or estimated empirically from wireline logs. Seven data points are located in sediments, and seventeen data points in igneous basement rocks at depths greater than 3000 m.The estimated magnitudes of σ_H are 70-110% of the σ_v magnitudes. Considering the errors in the stress magnitude estimates, their relative magnitudes suggest that a borderline normal/strike-slip stress regime presently exists in normally pressured sequences of the Nam Con Son and Cuu Long basins. Of the twenty-four data points, twenty have effective stress ratios at a critical stress state for faulting on the assumption that there are faults present that are optimally oriented for failure with friction coefficients of ∼0.5. The results suggest that the stress state in these basins is generally critical.     

Relating petroleum system and play development to basin evolution: West African South Atlantic basins

Sedimentary basins can be classified according to their structural genesis and evolutionary history and the latter can be linked to petroleum system and play development. We propose an approach in which we use the established concepts in a new way: breaking basins down into their natural basin cycle division, then defining the characteristics of each basin cycle (including the type of petroleum systems and plays they may contain) and comparing them with similar basin cycles in other basins, thereby providing a means to learn through a greater population of (perhaps not immediately obvious) analogues. Furthermore, we introduce the use of the trajectory plot as a new tool in such an analysis. This methodology has been applied to the West African South Atlantic marginal basins between Cameroon and Angola, and we demonstrate that the similar tectonostratigraphic evolution of the individual basins along this margin has led to the development of similar types of petroleum systems and play (level)s. Consequently, we can make analogue comparisons among these basins in order to evaluate and predict the presence of potential, yet undiscovered, hydrocarbon accumulations in less well explored parts of the margin.     

Study on the distribution characteristics of faults and their control over petroliferous basins in the China seas and its adjacent areas

As one of the main controlling factors of oil and gas accumulation, faults are closely related to the distribution of oil and gas reservoirs. Studying how faults control petroliferous basins is particularly important. In this work, we investigated the plane positions of major faults in the China seas and its adjacent areas using the normalized vertical derivative of the total horizontal derivative (NVDR-THDR) of the Bouguer gravity anomaly, the fusion results of gravity and magnetic anomalies, and the residual Bouguer gravity anomaly. The apparent depths of major faults in the China seas and its adjacent areas were inverted using the Tilt-Euler method based on the Bouguer gravity anomaly. The results show that the strikes of the faults in the China seas and its adjacent areas are mainly NE and NW, followed by EW, and near-SN. Among them, the lengths of most ultra-crustal faults are in the range of 1 000–3 000 km, and their apparent depths lie between 10 km and 40 km. The lengths of crustal faults lie between 300 km and 1 000 km, and their apparent depths are between 0 km and 20 km. According to the plane positions and apparent depths of the faults, we put forward the concept of fault influence factor for the first time. Based on this factor, the key areas for oil and gas exploration were found as follows: the east of South North China Basin in the intracontinental rift basins; the southeast region of East China Sea Shelf Basin, the Taixinan and Qiongdongnan basins in the continental margin rift basins; Zhongjiannan Basin in the strike-slip pull-apart basins; the Liyue, Beikang, and the Nanweixi basins in the rifted continental basins. This work provides valuable insights into oil and gas exploration, mineral resource exploration, and deep geological structure research in the China seas and its adjacent areas.     

Wrench-related folding: A case study of Bohai Sea basin,China

Wrench motion is relatively common in basins but often goes undetected because of its subtle structural imprint. Even so wrench-related folding is of significance in petroleum exploration and development. Based on the Riedel shear nomenclature, we apply the model of wrench-related folding to deformation in the Bohai sea basin. The folding related to R-shears, T-tensional structural systems (T-systems) and C-compressive structural systems (C-systems) in a Riedel shear model are discussed. The R-system related folding results from differential movements between the two sides of fault blocks, in map view the fold is oriented (90°-φ/2) (in the initial deformation stage) or more than (90°-φ/2) from the principle displacement zone (PDZ), where φ is the angle of internal friction. The T-system related folding is related to the rollover of the hanging wall, and in map view the fold is initiated at 45° from the PDZ in the initial deformation stage. The C-system related folding is resulted from the compression induced by a wrench action, in map view the fold was oriented 45° from initial deformation in the PDZ. Bohai Sea basin fold orientations fit our models, and the wrench-related folds play important roles in oil and gas accumulation.     

南海北部含油气构造上方化探异常研究

在南海北部利用地球化学方法作为油气勘探的一种辅助手段。在6个航次中采集了沉积物、底层海水及海面大气样品，测定了近50种化探指标，并采用稳健统计方法进行了数据处理和异常圈定。化探结果在油气藏上方发现了清晰的、具不同指标组合的综合化探异常，与邻近空构造形成鲜明的对照。圈闭顶部的块状异常和圈闭周绿的环状、半环状异常是下伏油气藏的良好指示，而剖面上呈锯齿状、平面上呈线状的异常则与断裂带有关。实践表明，建立已知油气藏上方的化探异常模式及解剖已知空构造上方的地球化学特征对于指导本区或邻区的化探异常评价是十分必要的。     

Pockmark-like depressions near the Goliat hydrocarbon field,Barents Sea: Morphology and genesis

Pockmarks are observed worldwide along the continental margins and are inferred to be indicators of fluid expulsion. In the present study, we have analysed multibeam bathymetry and 2D/3D seismic data from the south-western Barents Sea, in relation to gas hydrate stability field and sediment type, to examine pockmark genesis. Seismic attributes of the sediments at and beneath the seafloor have been analysed to study the factors related to pockmark formation. The seabed depths in the study area are just outside the methane hydrate stability field, but the presence of higher order hydrocarbon gases such as ethane and/or propane in the expelled fluids may cause localised gas hydrate formation. The selective occurrence of pockmarks in regions of specific seabed sediment types indicates that their formation is more closely related to the type of seabed sediment than the source path of fluid venting such as faults. The presence of high acoustic backscatter amplitudes at the centre of the pockmarks indicates harder/coarser sediments, likely linked to removal of soft material. The pockmarks show high seismic reflection amplitudes along their fringes indicating deposition of carbonates precipitated from upwelling fluids. High seismic amplitude gas anomalies underlying the region away from the pockmarks indicate active fluid flow from hydrocarbon source rocks beneath, which is blocked by overlying less permeable formations. In areas of consolidated sediments, the upward flow is limited to open fault locations, while soft sediment areas allow diffused flow of fluids and hence formation of pockmarks over a wider region, through removal of fine-grained material.     

Rare earth elements in bottom sediments of major rivers around the Yellow Sea: implications for sediment provenance

Rare earth elements (REEs) of 91 fine-grained bottom sediment samples from five major rivers in Korea (the Han, Keum, and Yeongsan) and China (the Changjiang and Huanghe) were studied to investigate their potential as source indicator for Yellow Sea shelf sediments, this being the first synthetic report on REE trends for bottom sediments of these rivers. The results show distinct differences in REE contents and their upper continental crust (UCC)-normalized patterns: compared to heavy rare earth elements (HREEs), light rare earth elements (LREEs) are highly enriched in Korean river sediments, in contrast to Chinese river sediments that have a characteristic positive Eu anomaly. This phenomenon is observed also in primary source rocks within the river catchments. This suggests that source rock composition is the primary control on the REE signatures of these river sediments, due largely to variations in the levels of chlorite and monazite, which are more abundant in Korean bottom river sediments. Systematic variations in ΣLREE/ΣHREE ratios, and in (La/Yb)–(Gd/Yb)_UCC but also (La/Lu)–(La/Y)_UCC and (La/Y)–(Gd/Lu)_UCC relations have the greatest discriminatory power. These findings are consistent with, but considerably expand on the limited datasets available to date for suspended sediments. Evidently, the REE fingerprints of these river sediments can serve as a useful diagnostic tool for tracing the provenance of sediments in the Yellow Sea, and for reconstructing their dispersal patterns and the circulation system of the modern shelf, as well as the paleoenvironmental record of this and adjoining marginal seas.     

Salt rollers: Structure and kinematics from analogue modelling

Salt rollers are low-amplitude deflections of the upper surface of a salt layer which occur below zones of normal faulting in the overlying sediments. They are widely recognised in association with tilted blocks or listric fault rollover systems. Laboratory experiments on brittle ductile models made of sand and silicone putty are used to study the modes of development, the external shape and the internal structures of these salt rollers. Firstly, flow and strain patterns within décollement zones are described. Finite strain combines layer-perpendicular shortening and layer-parallel shear. Additional flow cells within rollers perturb the laminar flow of the décollement, inducing a passive folding of planar markers. The same type of flow and strain patterns occur in all types of rollers, ranging from those occurring below tilted blocks to those associated with growth faults. Finally, an analysis of roller shapes through the measurement of aspect ratios and asymmetry ratios shows that the shapes of tilted blocks rollers and growth fault rollers—which differ at initiation tend to converge with increasing deformation.     

Changes in Geotechnical Properties of Sediments from the Central Indian Basin Induced by Disturbance Experiment

During the Indian Deep-sea Environment Experiment (INDEX) conducted in the Central Indian Basin to simulate nodule mining activity, the sediments were physically disturbed, lifted from the seafloor, and then redeposited to study the effects of sediment redistribution on geological, chemical and biological characteristics of benthic environment. The first monitoring cruise, 44 months after the experiment, was part of long-term observations for restoration of conditions. This study describes the effects of the experiment on geotechnical properties of sediments measured in predisturbance, postdisturbance and monitoring phases. To compare the effects, sediment cores were collected from the same locations during the three phases. Siliceous, fine-grained sediments from the study area showed change in geotechnical properties induced due to the disturbance. Marginal increase in natural water content and significant reduction in undrained shear strength at the 0–5 cm sediment layer of cores from the tow zone during postdisturbance was observed. However, during the monitoring phase, an increase in shear strength and reduction in water content was noticed, which might indicate that the sediments are gradually acquiring predisturbance characteristics. The study also revealed that the meiofaunal density has a positive correlation with the water content, but a negative relationship with the shear strength of these siliceous sediments. Specific gravity of solids and porosity showed marginal change, whereas wet density remained unchanged.     

Mechanisms for permeability modification in the damage zone of a normal fault,northern Perth Basin,Western Australia

Faults and their associated damage zones in sedimentary basins can be sealing, impeding fluid flow and creating permeability barriers, or open, creating fluid pathways. This impacts the reservoir potential of rocks in fault damage zones. Stylolitization and fracturing severely impacted permeability through compartmentalization and cementation of Apium-1, an exploration hole drilled in the northern Perth Basin, Western Australia. Apium-1 is located 1 km into the hanging wall block damage zone of a major NNW-trending normal fault. The drill core consists of fine- to medium-grained quartz arenite overlain by a coarse-grained lag and capped by impermeable shale. It was quantitatively characterized by sedimentary and structural logging, and microstructural and porosity-permeability analysis. Fractures and stylolites in the damage zone of the major fault are shown to have been sealed. Extensional cracks have been sealed by quartz precipitation; shear fractures that locally preserve brecciation are always quartz and siderite cemented; stylolites are common and contain halos of quartz cementation. In each case, porosity was reduced to approximately 1%, with concomitant reduction of permeability to <<0.01 mD. These structures are observed to be interconnected in the core and are likely to form a larger-scale 3D network of steeply-dipping fractures and shallowly-dipping stylolites. The bulk permeability of the damage zone would reflect the permeability of the fractures and stylolites, compartmentalizing the Mesozoic rocks in the northern Perth Basin into elongate NW-SE trending blocks if the magnitude of stress does not exceed the cemented rock strength.