Effect of zonal E × B plasma drift on electron density in the low-latitude ionospheric <Emphasis Type="Italic">F</Emphasis> region at a solar activity maximum near vernal equinox

The variations in the density of the ionospheric F2 layer maximum (NmF2) under the action of the zonal plasma drift perpendicularly to the magnetic (B) and electric (E) fields in the direction geomagnetic west-geomagnetic east have been studied using the three-dimensional nonstationary theoretical model of electron and ion densities (N _e and N _i ) and temperatures (T _e and T _i ) in the low-latitude and midlatitude ionospheric F region and plasmasphere. The method of numerical calculations of N _e , N _i , T _e , and T _i , including the advantages of the Lagrangian and Eulerian methods, is used in the model. A dipole approximation of the geomagnetic field (B), taking into account the non-coincidence of the geographic and geomagnetic poles and differences between the positions of the Earth’s and geomagnetic dipole centers, is accepted in the calculations. The calculated NmF2 and altitudes of the F2 layer maximum (hmF2) have been compared with these quantities measured at 16 low-latitude ionospheric sounding stations during the geomagnetically quiet period October 11–12, 1958. This comparison made it possible to correct the input model parameters: the NRLMSISE-00 model [O], the meridional component of the neutral wind velocity according to the HWW90 model, and the meridional component of the equatorial plasma drift due to the electric field specified by the empirical model. It has been indicated that the effect of the zonal E × B plasma drift on NmF2 can be neglected under daytime conditions and changes in NmF2 and hmF2 under the action of this drift are insignificant under nighttime conditions north of 25° and south of ?26° geomagnetic latitude. The effect of the zonal E × B plasma drift on NmF2 and hmF2 is most substantial in the nightside ionosphere approximately from ?20° to 20° geomagnetic latitude, and the neglect of this drift results in an up to 2.4-fold underestimation of NmF2. The found dependence of the effect of the zonal E × B plasma drift on NmF2 and hmF2 on geomagnetic latitude is related to the longitudinal asymmetry of B, asymmetry of the neutral wind about the geomagnetic equator, and changes in the meridional E × B plasma drift at a change in geomagnetic longitude.     

Precursor times of abnormal <Emphasis Type="Italic">b</Emphasis>-values prior to mainshocks

Seismic observations exhibit the presence of abnormal b-values prior to numerous earthquakes. The time interval from the appearance of abnormal b-values to the occurrence of mainshock is called the precursor time. There are two kinds of precursor times in use: the first one denoted by T is the time interval from the moment when the b-value starts to increase from the normal one to the abnormal one to the occurrence time of the forthcoming mainshock, and the second one denoted by T _p is the time interval from the moment when the abnormal b-value reaches the peak one to the occurrence time of the forthcoming mainshock. Let T* be the waiting time from the moment when the abnormal b-value returned to the normal one to the occurrence time of the forthcoming mainshock. The precursor time, T (usually in days), has been found to be related to the magnitude, M, of the mainshock expected in a linear form as log(T)?=?q?+?rM where q and r are the coefficient and slope, respectively. In this study, the values of T, T _p , and T* of 45 earthquakes with 3?≤?M?≤?9 occurred in various tectonic regions are compiled from or measured from the temporal variations in b-values given in numerous source materials. The relationships of T and T _p , respectively, versus M are inferred from compiled data. The difference between the values of T and T _p decreases with increasing M. In addition, the plots of T*/T versus M, T* versus T, and T* versus T-T* will be made and related equations between two quantities will be inferred from given data.     

Homologous temperature of olivine: Implications for creep of the upper mantle and fabric transitions in olivine

The homologues temperature of a crystalline material is defined as T/T_m, where T is temperature and T_m is the melting(solidus) temperature in Kelvin. It has been widely used to compare the creep strength of crystalline materials. The melting temperature of olivine system,(Mg,Fe)_2SiO_4, decreases with increasing iron content and water content, and increases with confining pressure. At high pressure, phase transition will lead to a sharp change in the melting curve of olivine. After calibrating previous melting experiments on fayalite(Fe_2SiO_4), the triple point of fayalite-Fe_2SiO_4 spinel-liquid is determined to be at 6.4 GPa and 1793 K. Using the generalized means, the solidus and liquidus of dry olivine are described as a function of iron content and pressure up to 6.4 GPa. The change of T/T_m of olivine with depth allows us to compare the strength of the upper mantle with different thermal states and olivine composition. The transition from semi-brittle to ductile deformation in the upper mantle occurs at a depth where T/T_m of olivine equals 0.5. The lithospheric mantle beneath cratons shows much smaller T/T_m of olivine than orogens and extensional basins until the lithosphere-asthenosphere boundary where T/T_m 0.66, suggesting a stronger lithosphere beneath cratons. In addition, T/T_m is used to analyze deformation experiments on olivine. The results indicate that the effect of water on fabric transitions in olivine is closely related with pressure. The hydrogen-weakening effect and its relationship with T/T_m of olivine need further investigation. Below 6.4 GPa(200 km), T/T_m of olivine controls the transition of dislocation glide from [100] slip to [001] slip. Under the strain rate of 10~(-12)–10~(-15) s~(-1) and low stress in the upper mantle, the [100](010) slip system(A-type fabric) becomes dominant when T/T_m 0.55–0.60. When T/T_m 0.55–0.60, [001] slip is easier and low T/T_m favors the operation of [001](100) slip system(C-type fabric). This is consistent with the widely observed A-type olivine fabric in naturally deformed peridotites, and the C-type olivine fabric in peridotites that experienced deep subduction in ultrahigh-pressure metamorphic terranes. However, the B-type fabric will develop under high stress and relatively low T/T_m. Therefore, the homologues temperature of olivine established a bridge to extrapolate deformation experiments to rheology of the upper mantle. Seismic anisotropy of the upper mantle beneath cratons should be simulated using a four-layer model with the relic A-type fabric in the upper lithospheric mantle, the B-type fabric in the middle layer, the newly formed A- or B-type fabric near the lithosphere-asthenosphere boundary, and the asthenosphere dominated by diffusion creep below the Lehmann discontinuity. Knowledge about transition mechanisms of olivine fabrics is critical for tracing the water distribution and mantle flow from seismic anisotropy.     

Modeling of the thermal structure of continental lithosphere

The thermal structure of continental lithosphere (the temperature, heat flows, and heat generation in the crust and lithosphere) is reconstructed from geothermal, seismic, and petrologic data. The first step is the determination of the temperature profile from absolute P and S wave velocities (T _{P, S} ). The T _{P, S} profile is then adjusted to a thermophysical model of conductive transfer. In addition, the surface heat flow and the T _{P, S} profile are used to determine heat generation, thicknesses of crustal layers, and heat flow components in the crust and lithosphere. A feature inherent in the solution of the thermophysical inverse problem obtained in this paper is the use of constraints derived from the temperature reconstruction by seismic data inversion. As a result, the analytical dependence of the temperature on depth, the intensity of radiogenic heat sources in the crust, and heat flow components in the crust and lithosphere are determined.     

Creepex of Kamchatka shallow earthquakes

Results of investigation of the lithosphere in the Kamchatka seismic focal zone from dynamic characteristics of earthquake records obtained at regional stations are presented. It is assumed that the specificity of the source zone can be estimated by the relation Cr = K _P ? bK _S ? c characterizing relative energies (energy classes, according to [Fedotov, 1972]) of short period transverse and longitudinal waves in the source. Azimuthal, spatial, and temporal variations in Cr and their relation to focal mechanisms are examined. Spatiotemporal variations in this parameter are shown to be caused by the influence of variations in the conditions in the source zone (its substance or process) on the radiation of P and S waves.     

Magnetic field variations in the umbra of single sunspots during their passage across the solar disk

Temporal variations of the maximum (B _max) and average (〈B〉) magnetic inductions, minimum (α _min) and average (〈α〉) inclination angles of the field lines to the radial direction from the center of the Sun, and areas of the sunspot umbra S in the umbra of single sunspots during their passage across the solar disk are investigated. The variation of the properties of single sunspots has been considered at different stages of their existence, i.e., during formation, the “quiet” period, and the disappearance stage. It has been found that, for the majority of the selected single sunspots, there is a positive correlation between B _max and S and between 〈B〉 and S defined at different times during the passage of sunspots across the solar disk. It is shown in this case that the nature of the dependence between the parameters α _min and B _max, α _min and S, as well as between 〈α〉 and 〈B〉, 〈α〉 and S, can vary from sunspot to sunspot, but for many sunspots the inclination angle of the field lines decreases on average with the growth of the sunspot umbra area and the field strength.     

Stochastic models of severe weather watches and warnings: transition probabilities

To alert the public to the possibility of tornado (T), hail (H), or convective wind (C), the National Weather Service (NWS) issues watches (V) and warnings (W). There are severe thunderstorm watches (SV), tornado watches (TV), and particularly dangerous situation watches (PV); and there are severe thunderstorm warnings (SW), and tornado warnings (TW). Two stochastic models are formulated that quantify uncertainty in severe weather alarms for the purpose of making decisions: a one-stage model for deciders who respond to warnings, and a two-stage model for deciders who respond to watches and warnings. The models identify all possible sequences of watches, warnings, and events, and characterize the associated uncertainties in terms of transition probabilities. The modeling approach is demonstrated on data from the NWS Norman, Oklahoma, warning area, years 2000–2007. The major findings are these. (i) Irrespective of its official designation, every warning type {SW, TW} predicts with a significant probability every event type {T, H, C}. (ii) An ordered intersection of SW and TW, defined as reinforced warning (RW), provides additional predictive information and outperforms SW and TW. (iii) A watch rarely leads directly to an event, and most frequently is false. But a watch that precedes a warning does matter. The watch type \(\{SV\), TV, \(PV\}\) is a predictor of the warning type \(\{SW\), RW, \(TW\}\) and of the warning performance: It sharpens the false alarm rate of the warning and the predictive probability of an event, and it increases the average lead time of the warning.     

Earthquake hazard and risk assessment based on Unified Scaling Law for Earthquakes: Greater Caucasus and Crimea

We continue applying the general concept of seismic risk analysis in a number of seismic regions worldwide by constructing regional seismic hazard maps based on morphostructural analysis, pattern recognition, and the Unified Scaling Law for Earthquakes (USLE), which generalizes the Gutenberg-Richter relationship making use of naturally fractal distribution of earthquake sources of different size in a seismic region. The USLE stands for an empirical relationship log₁₀N(M, L)?=?A?+?B·(5 – M)?+?C·log₁₀L, where N(M, L) is the expected annual number of earthquakes of a certain magnitude M within a seismically prone area of linear dimension L. We use parameters A, B, and C of USLE to estimate, first, the expected maximum magnitude in a time interval at seismically prone nodes of the morphostructural scheme of the region under study, then map the corresponding expected ground shaking parameters (e.g., peak ground acceleration, PGA, or macro-seismic intensity). After a rigorous verification against the available seismic evidences in the past (usually, the observed instrumental PGA or the historically reported macro-seismic intensity), such a seismic hazard map is used to generate maps of specific earthquake risks for population, cities, and infrastructures (e.g., those based on census of population, buildings inventory). The methodology of seismic hazard and risk assessment is illustrated by application to the territory of Greater Caucasus and Crimea.     

Dependence of geomagnetic disturbances on extreme values of the solar wind <Emphasis Type="Italic">E</Emphasis><Subscript><Emphasis Type="Italic">y</Emphasis></Subscript> component

The dependence of the zonal geomagnetic indices (AE, Ap, Kp, Kn, and Dst) on the solar wind parameters (the electric field E _y component, dynamic pressure P _d and IMF irregularity σB) has been studied for two types of events: magnetic clouds and high-speed streams. Based on the empirical relationships, it has been established that the AE, Ap, Kp, and Kn indices are directly proportional to the E _y value at E _y < 12 mV m^?1 and are inversely proportional to this value at E _y > 12 mV m^?1 for the first-type events. On the contrary, the dependence of Dst on E _y is monotonous nonlinear. A linear dependence of all geomagnetic indices on E _y is typical of the second-type events. It has been indicated that the specific features of geoeffectiveness of magnetic clouds and high-speed solar wind streams are caused by the dependence of the electric field potential across the polar cap on the electric field, solar wind dynamic pressure, and IMF fluctuations.     

Crustal stress field in Yunnan: implication for crust-mantle coupling

We applied the g CAP algorithm to determine239 focal mechanism solutions 3:0 M We 6:0T with records of dense Chin Array stations deployed in Yunnan,and then inverted 686 focal mechanisms(including 447 previous results) for the regional crustal stress field with a damped linear inversion. The results indicate dominantly strike-slip environment in Yunnan as both the maximum(r1) and minimum(r3) principal stress axes are sub-horizontal. We further calculated the horizontal stress orientations(i.e., maximum and minimum horizontal compressive stress axes: S H and S h, respectively) accordingly and found an abrupt change near *26°N. To the north, S H aligns NW-SE to nearly E-W while S h aligns nearly N-S. In contrast, to the south, both S H and S h rotate laterally and show dominantly fan-shaped patterns. The minimum horizontal stress(i.e., maximum strain axis) S h rotates from NW-SE to the west of Tengchong volcano gradually to nearly E-W in west Yunnan, and further toNE-SW in the South China block in the east. The crustal strain field is consistent with the upper mantle strain field indicated by shear-wave splitting observations in Yunnan but not in other regions. Therefore, the crust and upper mantle in Yunnan are coupled and suffering vertically coherent pure-shear deformation in the lithosphere.     

Long-period irregular pulsations under the conditions of a quiet magnetosphere

Simultaneous observations of high-latitude long-period irregular pulsations at frequencies of 2.0–6.0 mHz (ipcl) and magnetic field disturbances in the solar wind plasma at low geomagnetic activity (Kp ~ 0) have been studied. The 1-s data on the magnetic field registration at Godhavn (GDH) high-latitude observatory and the 1-min data on the solar wind plasma and IMF parameters for 2011–2013 were used in an analysis. Ipcl (irregular pulsations continuous, long), which were observed against a background of the IMF Bz reorientation from northward to southward, have been analyzed. In this case other solar wind plasma and IMF parameters, such as velocity V, density n, solar wind dynamic pressure P = ρV² (ρ is plasma density), and strength magnitude B, were relatively stable. The effect of the IMF Bz variation rate on the ipcl spectral composition and intensity has been studied. It was established that the ipcl spectral density reaches its maximum (~10–20 min) after IMF Bz sign reversal in a predominant number of cases. It was detected that the ipcl average frequency (f) is linearly related to the IMF Bz variation rate (ΔBz/Δt). It was shown that the dependence of f on ΔBz/Δt is controlled by the α = arctan(By/Bx) angle value responsible for the MHD discontinuity type at the front boundary of magnetosphere. The results made it possible to assume that the formation of the observed ipcl spectrum, which is related to the IMF Bz reorientation, is caused by solar wind plasma turbulence, which promotes the development of current sheet instability and surface wave amplification at the magnetopause.     

Generation of superDreicer electric fields in the solar chromosphere

The electric field generation at the front of the current pulse, which originates in a coronal magnetic loop owing to the development of the Rayleigh–Taylor magnetic instability at loop footpoints, has been considered. During the τ_A ≈ l/V _A ≈ 5?25 s time (where l is the plasma plume height entering a magnetic loop as a result of the Rayleigh–Taylor instability), a disturbance related to the magnetic field tension B _?(r,t), “escapes” the instability region with the Alfvén velocity in this case. As a result, an electric current pulse I_z(z ? V _A t), at the front of which an induction magnetic field E _z, which is directed along the magnetic tube axis and can therefore accelerate particles, starts propagating along a magnetic loop with a characteristic scale of Δξ ≈ l. In the case of sufficiently large currents, when B _? ²/8π > p, an electric current pulse propagates nonlinearly, and a relatively large longitudinal electric field originates E _z ≈ 2I _z ³ V _A/c ⁴a²B_z ²l, which can be larger than the Dreicer field, depending on the electric current value.     

Shape and position of Earth’s bow shock near-lunar orbit based on ARTEMIS data

Earth’s bow shock is the result of interaction between the supersonic solar wind and Earth’s magnetopause. However, data limitations mean the model of the shape and position of the bow shock are based largely on near-Earth satellite data. The model of the bow shock in the distant magnetotail and other factors that affect the bow shock, such as the interplanetary magnetic field (IMF) B_y, remain unclear. Here, based on the bow shock crossings of ARTEMIS from January 2011 to January 2015, new coefficients of the tail-flaring angle α of the Chao model (one of the most accurate models currently available) were obtained by fitting data from the middle-distance magnetotail (near-lunar orbit, geocentric distance -20R_E>X>-50R_E). In addition, the effects of the IMF B_y on the flaring angle α were analyzed. Our results showed that: (1) the new fitting coefficients of the Chao model in the middle-distance magnetotail are more consistent with the observed results; (2) the tail-flaring angle α of the bow shock increases as the absolute value of the IMF B_y increases. Moreover, positive IMF B_y has a greater effect than negative IMF B_y on flaring angle. These results provide a reference for bow shock modeling that includes the IMF B_y.     

Experimental study on the shear behavior of the interface between cushion materials and the concrete raft

Cushion is a layer of granular materials between the raft and the ground. The shear behavior of the interface between the cushion and the raft may influence the seismic performance of the superstructure. In order to quantify such influences, horizontal shear tests on the interfaces between different cushion materials and concrete raft under monotonic and cyclic loading were carried out. The vertical pressure P_v, material type and cushion thickness h_c were taken as variables. Conclusions include: 1) under monotonic loading, P_v is the most significant factor; the shear resistance P_(hmax) increases as P_v increases, but the normalized factor of resistance μ_n has an opposite tendency; 2) for the materials used in this study, μ_n varies from 0.40 to 0.70, the interface friction angle δ_s varies from 20° to 35°, while u_(max) varies from 3 mm to 15 mm; 3) under cyclic loading, the interface behavior can be abstracted as a "three-segment" back-bone curve, the main parameters include μ_n, the displacement u_1 and stiffness K_1 of the elastic stage, the displacement u_2 and stiffness K_2 of the plastic stage; 4) by observation and statistical analysis, the significance of different factors, together with values of K_1, K_2 and μ_n have been obtained.     

Evaluating BOD and the coefficient of oxidation rate: Monitoring,direct and inverse problems,formulas, calculations and tables

It is proposed to evaluate two theoretical characteristics, i.e., BOD (biochemical oxygen demand) and k ₀ (the coefficient of oxidation rate by new formulas based on two experimental variables: BOD _T and BOD_2T (biochemical oxygen consumption in two periods T and 2T day, respectively). The formulation and an analytical solution are given for a direct problem describing the process of biochemical oxidation of organic matter (OM) in a water volume in the absence of aeration (e.g., in a water body under ice or in a sealed flask used to measure biochemical oxygen consumption). The problem is solved based on the closed (modified) Streeter–Phelps system. Unlike the classical Streeter–Phelps system, the closed system excludes physically incorrect solutions (e.g., negative concentrations of dissolved oxygen (DO)) [4]. The solution of the direct problem is used to formulate an inverse problem, whose solution is given in the form of formulas for evaluating BOD and k ₀. These formulas are used to compile tables to illustrate the essence of the proposed method.     

Dynamics of the ionospheric electric currents and auroral luminosity boundaries during strong magnetic storms

The regularities in the southward drift of the ionospheric current centers and luminosity boundaries during strong magnetic storms of November 2003 and 2004 (with Dst ≈ ?400 and ?470 nT, respectively) are studied based on the global geomagnetic observations and TV measurements of auroras. It has been indicated that the eastward and westward electrojets in the dayside and nightside sectors simultaneously shift equatorward to minimal latitudes of Φ _min ^° ～53°–55°. It has been obtained that the Φ _min ^° latitude decreases with increasing negative values of Dst, IMF B _z component, and westward electric field strength in the solar wind. The dependence of the electrojet equatorward shift velocity (V _av) on the rate of IMF B _z variations (ΔB _z /Δt) has been determined. It is assumed that the electrojet dynamics along the meridian is caused by a change in the structure of the magnetosphere and electric fields in the solar wind and the Earth’s magnetosphere.     

Geomagnetically Induced Currents and Space Weather: Pi3 Pulsations and Extreme Values of Time Derivatives of the Geomagnetic Field’s Horizontal Components

The problem of estimating the time derivatives of the horizontal components of the geomagnetic field and forecasting the probability of the occurrence of perturbations that exceed a given threshold level (the over-threshold perturbations) arises in the applications concerned with the geomagnetically induced currents (GICs). In this work, we consider the temporal and spatial structure of the Pi3 pulsations with quasi-periods of 10² to 10³ s during which the auroral and subauroral stations of the IMAGE network record over-threshold values in the derivatives of the meridional (along the longitudinal circle) B_X component and latitudinal (along the latitudinal circle) B_Y component. The extreme |dB_X/dt| values mainly develop against the background of the Pi3 pulsations with a complex frequency content, whereas the extreme |dB_Y/dt| values appear when the buildup (decay) phases of the bay-like disturbance associated with the evolution of a substorm coincide with the respective phases of the field of pulsations. The conditions under which the derivatives |dB_X/dt| and |dB_Y/dt| reach their over-threshold values are studied for subauroral latitudes by the technique of superposed epoch analysis. The extreme values of the derivatives most frequently occur during the main phase of moderate magnetic storms or beyond the storm—during high substorm activity under the conditions of a negative vertical component of the interplanetary magnetic field. The probability of the occurrence of over-threshold values increases at high amplitudes of the Pi3 pulsations and depends on their spectral content. The problem of analyzing and forecasting the over-threshold |dB_Y/dt| perturbations is complicated by the fact that the scale of the perturbations is small along the lines of latitude and large along the meridians. This can result in GIC excitation in the North–South oriented electric power lines by the geomagnetic perturbations localized within a narrow band in longitude which can be missed during the measurements.     

Testing the reference Moon model in respect of the thermal regime and chemical composition of the mantle: Thermodynamics versus seismology

The VPREMOON seismic reference Moon model (Garcia et al., 2011) has been tested with respect to the thermal regime and chemical composition of the mantle. Based on a self-consistent thermodynamic approach and petrological models of the lunar mantle covering a wide range of concentrations of CaO, Al₂O₃, and FeO, we convert the P- and S-wave velocity profiles to the temperature–depth profiles. The solution procedure relies on the method of the Gibbs free energy minimization and the equations of state for the mantle material which take into account the effects of phase transformations, anharmonicity, and anelasticity. We find that regardless of the chemical composition, the positive P- and S-wave velocity gradient in the lunar mantle leads to a negative temperature gradient, which has no physical basis. For adequate mantle temperatures, the P- and S-wave velocities should remain almost constant or slightly decrease with depth (especially V_S) as a result of the effects of the temperature, which grows faster than pressure. These findings underscore the importance of the relationship of the thermodynamics and physics of minerals with seismology.     

Effect of the IMF azimuthal component on the longitudinal position of the westward electrojet intensity maximum during strong geomagnetic storms

The distribution of the ionospheric currents during the geomagnetic storms of November 20–21, 2003, November 7–8, 2004, and November 9–10, 2004, depending on the IMF B _y component, has been studied based on the data from the global network of magnetic stations. It has been indicated that, during geomagnetic disturbances, the westward electrojet intensity maximum is localized in the evening sector at IMF B _y < 0 and in the morning sector at IMF B _y > 0. The region of the westward electrojet intensity maximum shifts to morning hours with increasing positive B _y values. Thus, the IMF azimuthal component forms not only the magnetospheric convection pattern during magnetic storms but is also responsible for the longitudinal position of ionospheric structures.     

Near-source attenuation of high-frequency body waves beneath the New Madrid Seismic Zone

Attenuation characteristics in the New Madrid Seismic Zone (NMSZ) are estimated from 157 local seismograph recordings out of 46 earthquakes of 2.6?≤?M?≤?4.1 with hypocentral distances up to 60 km and focal depths down to 25 km. Digital waveform seismograms were obtained from local earthquakes in the NMSZ recorded by the Center for Earthquake Research and Information (CERI) at the University of Memphis. Using the coda normalization method, we tried to determine Q values and geometrical spreading exponents at 13 center frequencies. The scatter of the data and trade-off between the geometrical spreading and the quality factor did not allow us to simultaneously derive both these parameters from inversion. Assuming 1/R ^1.0 as the geometrical spreading function in the NMSZ, the Q _P and Q _S estimates increase with increasing frequency from 354 and 426 at 4 Hz to 729 and 1091 at 24 Hz, respectively. Fitting a power law equation to the Q estimates, we found the attenuation models for the P waves and S waves in the frequency range of 4 to 24 Hz as Q _P?=?(115.80?±?1.36) f ^{(0.495?±?0.129)} and Q _S?=?(161.34?±?1.73) f ^{(0.613?±?0.067)}, respectively. We did not consider Q estimates from the coda normalization method for frequencies less than 4 Hz in the regression analysis since the decay of coda amplitude was not observed at most bandpass filtered seismograms for these frequencies. Q _S/Q _P?>?1, for 4?≤?f?≤?24 Hz as well as strong intrinsic attenuation, suggest that the crust beneath the NMSZ is partially fluid-saturated. Further, high scattering attenuation indicates the presence of a high level of small-scale heterogeneities inside the crust in this region.